| 0/0 |
2026/09/13 00:06 |
flow |
assessment-security |
27m
Results: map[DenialOfService:false Explanation:**Analysis of the Bug**
The bug report indicates a `WARN_ON_ONCE(!size)` triggered in
`__vmalloc_node_range_noprof()` when attempting to allocate memory with a size
of 0.
Following the call trace, the bug is triggered by writing to the
`/sys/block/zram0/disksize` sysfs attribute. The `disksize_store()` function in
`drivers/block/zram/zram_drv.c` parses the user-provided string into a `u64
disksize` and then aligns it to the page size using `PAGE_ALIGN(disksize)`.
If a very large value is written (e.g., `0xffffffffffffffff` as seen in the
syzkaller reproducer), the `PAGE_ALIGN()` macro causes the value to wrap around
to `0`. Consequently, `zram_meta_alloc()` calculates `num_pages = 0` and calls
`vzalloc(0)`. This triggers the `WARN_ON_ONCE(!size)` in the vmalloc code.
**Exploitability and Denial of Service**
The warning is properly handled by the kernel's control flow. The
`__vmalloc_node_range_noprof()` function simply returns `NULL` after emitting
the warning. The caller, `zram_meta_alloc()`, correctly checks for this `NULL`
return value and gracefully fails, causing `disksize_store()` to return
`-ENOMEM`.
There is no memory corruption, out-of-bounds access, or resource leak. In a
production environment where `panic_on_warn` is disabled, the system will just
log the warning and continue executing normally. Therefore, this bug is neither
exploitable nor does it cause a denial of service.
**Accessibility**
The sysfs attribute `/sys/block/zram0/disksize` is created with `0644`
permissions and is owned by the global `root` user.
- **Unprivileged Processes:** A typical non-root user cannot write to this file
due to the DAC permissions.
- **User Namespaces:** If an unprivileged user creates a new user namespace and
mounts `sysfs`, the file will still be owned by the global root user. Since the
global root UID is not mapped in the unprivileged user's namespace, the file's
owner will appear as `nobody` (or `overflowuid`). The user will not have
`CAP_DAC_OVERRIDE` privileges over files owned by unmapped UIDs, meaning they
still cannot write to the file.
Thus, the bug is strictly reachable only by a globally privileged user (root).
**Other Triggers**
The bug is isolated to the sysfs configuration interface of the `zram` block
device. It cannot be triggered via network traffic, peripheral devices,
malicious filesystems, or from within a VM guest. Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
|
| 1/1 |
2026/09/13 00:06 |
action |
syz-repro-to-c-repro |
0m
Results: map[SimplifiedCRepro:// autogenerated by syzkaller (https://github.com/google/syzkaller)
#define _GNU_SOURCE
#include <endian.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
#ifndef __NR_mkdirat
#define __NR_mkdirat 323
#endif
#ifndef __NR_mmap
#define __NR_mmap 192
#endif
#ifndef __NR_mount
#define __NR_mount 21
#endif
#ifndef __NR_openat
#define __NR_openat 322
#endif
#ifndef __NR_write
#define __NR_write 4
#endif
#undef __NR_mmap
#define __NR_mmap __NR_mmap2
uint64_t r[1] = {0xffffffffffffffff};
int main(void)
{
syscall(__NR_mmap, /*addr=*/0x1ffff000, /*len=*/0x1000, /*prot=*/0, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
syscall(__NR_mmap, /*addr=*/0x20000000, /*len=*/0x1000000, /*prot=PROT_WRITE|PROT_READ|PROT_EXEC*/7, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
syscall(__NR_mmap, /*addr=*/0x21000000, /*len=*/0x1000, /*prot=*/0, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
const char* reason;
(void)reason;
intptr_t res = 0;
if (write(1, "executing program\n", sizeof("executing program\n") - 1)) {}
// mkdirat arguments: [
// fd: fd_dir (resource)
// path: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 00} (length 0x6)
// }
// mode: open_mode = 0x1ff (4 bytes)
// ]
memcpy((void*)0x20000000, "./sys\000", 6);
syscall(__NR_mkdirat, /*fd=*/0xffffff9c, /*path=*/0x20000000, /*mode=S_IXOTH|S_IWOTH|S_IROTH|S_IXGRP|S_IWGRP|S_IRGRP|S_IXUSR|S_IWUSR|0x100*/0x1ff);
// mount arguments: [
// src: nil
// dst: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 00} (length 0x6)
// }
// type: ptr[in, buffer] {
// buffer: {73 79 73 66 73 00} (length 0x6)
// }
// flags: mount_flags = 0x0 (4 bytes)
// data: nil
// ]
memcpy((void*)0x20000000, "./sys\000", 6);
memcpy((void*)0x20000100, "sysfs\000", 6);
syscall(__NR_mount, /*src=*/0, /*dst=*/0x20000000, /*type=*/0x20000100, /*flags=*/0, /*data=*/0);
// openat arguments: [
// fd: fd_dir (resource)
// file: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 2f 62 6c 6f 63 6b 2f 7a 72 61 6d 30 2f 64 69 73 6b 73 69 7a 65 00} (length 0x1b)
// }
// flags: open_flags = 0x1 (4 bytes)
// mode: open_mode = 0x0 (2 bytes)
// ]
// returns fd
memcpy((void*)0x20000400, "./sys/block/zram0/disksize\000", 27);
res = syscall(__NR_openat, /*fd=*/0xffffff9c, /*file=*/0x20000400, /*flags=O_WRONLY*/1, /*mode=*/0);
if (res != -1)
r[0] = res;
// write arguments: [
// fd: fd (resource)
// buf: ptr[in, buffer] {
// buffer: {31 45} (length 0x2)
// }
// count: len = 0x2 (4 bytes)
// ]
memcpy((void*)0x20000140, "1E", 2);
syscall(__NR_write, /*fd=*/(intptr_t)r[0], /*buf=*/0x20000140, /*count=*/2);
return 0;
}
]
|
| 2/1 |
2026/09/13 00:06 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/2be1aeb1f5ee0ceace15b0e71b019d9d3c2b9a13]
|
| 3/1 |
2026/09/13 00:06 |
action |
kernel-builder |
10m
Results: map[KernelObj:/app/workdir/cache/build/299bfa966caf8fd5149fd16429dbaea1fdefc0d2]
|
| 4/1 |
2026/09/13 00:17 |
action |
codesearch-prepare |
10m
Results: map[Index:codesearch-index]
|
| 5/1 |
2026/09/13 00:28 |
agent |
expert |
5m
Model:
Results: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
Instruction: You are an experienced Linux kernel security engineer. Your task is to analyze given kernel bug report
and determine its security impact based on the following dimensions.
Use the provided tools to examine the source code, check for capability checks (e.g., capable(), ns_capable()),
and understand the nature of the bug. Analyze the given kernel build and configuration.
You can check the kernel config by grepping ".config" file; you can check kernel cmdline by grepping
".config" file for "CONFIG_CMDLINE=". Assume sysctl parameters have default values.
But analyze for the corresponding production build w/o debugging tools enabled (like KASAN, KMSAN, UBSAN).
Try different strategies when analyzing the bug:
- think of ways in which the vulnerable code is unreachable
- or the other way around: try to come up with different ideas of how an unprivileged user can reach the bug
If still unsure err on the side of the bug being non-exploitable/not-accessible.
In the final reply, provide a reasoning for your assessment.
Analysis dimensions:
* Exploitable:
Determine if the bug can result in memory corruption, elevated privileges, or an information leak.
Memory safety issues are almost always exploitable (KASAN or UBSAN reports for use-after-free, out-of-bounds;
refcounting issues, corrupted lists, etc). When kernel is crashing on a completely wild pointer access
(e.g. user-space address, or non-canonical address, but not on NULL or address corresponding to KASAN shadow
for NULL address), including both data accesses and control transfers, that also usually implies possibility
of exploitation. Such reports usually say "unable to handle kernel paging request".
Uses of uninitialized values detected by KMSAN may be exploitable b/c attacker frequently can affect uninit
values with spraying techniques. However, for these exploitability depends on how exactly the uninit value
is used in the code, and what it affects.
Information leaks are exploitable on their own and should be classified as such. A bug that copies kernel
memory contents to userspace (e.g. an out-of-bounds read whose result is returned to the caller, or
uninitialized stack/heap bytes written to a user buffer) is exploitable: it can reveal kernel pointer
values and defeat KASLR, expose sensitive data such as cryptographic keys or other processes' memory, and
serves as a necessary building block in most modern kernel privilege-escalation exploit chains. Do not classify
an information leak as non-exploitable solely because it does not directly cause a memory write or control-flow
hijack; the leak itself is the exploit primitive.
Think of what happens after the bug is triggered. Some bugs cause kernel panic and halt execution,
they are harder to exploit. For example, BUG reports halts the kernel. However, WARNING reports don't halt
execution in production builds. Debug bug detection tools (like KASAN, KMSAN, KCSAN, UBSAN) are also not enabled
in production builds, so attacker can freely exploit these bugs w/o being detected by these tools.
If you see an integer overflow, think how the overflowed value used later (if it's used as allocation size,
or an array index). If you see an out-of-bounds read, think if it's followed by an out-of-bounds write as well.
Some KCSAN data-races may be exploitable by skilled attackers as well. Think what data structures got corrupted
as the result of data races and how. However, note that kernel has lots of "benign" data races that don't lead
to any runtime misbehavior at all.
* Denial Of Service:
Determine if the bug can result in denial-of-service. Most bugs can, since they cause system crash,
hangs, deadlocks, or resource leaks. This is mostly applicable to WARNING bugs that won't cause system crash
in production. For these think what will be consequences of the violation of the kernel assumptions flagged
by the WARNING. In some cases the unexpected condition is also properly handled by the normal control flow
(e.g. with "if (WARN_ON(...))"), these won't cause denial-of-service. If the condition is not handled,
then it may or may not cause denial-of-service.
* Accessible From Unprivileged Processes:
Determine if the bug can be reached from a typical (non-root) user process that does NOT have any special capabilities
(like CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON) or access to device nodes restricted to root.
Assume that unprivileged_bpf_disabled=1, that is eBPF loading is not accessible. However, cBPF (classical BPF)
is still accessible to non-root processes.
Assume that user namespaces are not accessible, that is, the process cannot get the mentioned capabilities even
within a new user namespace (checked by ns_capable() function in the kernel sources).
* Accessible From User Namespaces:
Determine if the bug can be reached within a user-namespace where the process has all capabilities
(including CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON). Such capabilities are checked with ns_capable()
function in the kernel sources.
* VM Guest Trigger:
Determine if the bug can be triggered from the context of a typical KVM guest (e.g., set up by a QEMU VMM).
Consider accesses to standard Linux host paravirtualized features (virtio-blk, virtio-net, etc.),
and handling of VM exits in the KVM code.
* VM Host Trigger in The Confidential Computing Context:
Determine if the bug can be triggered in a confidential computing guest kernel from the context of a KVM host.
Consider access to standard Linux guest paravirtualized features (virtio-blk, virtio-net, etc.).
* Ethernet Network Trigger:
Determine if the bug can be triggered by processing ingress network Ethernet traffic, either directly (network stack)
or via drivers exposed to network data.
* Other Remote Trigger:
Determine if the bug can be triggered by processing remote traffic other than Ethernet (Wifi, Bluetooth, NFC, etc).
* Peripheral Trigger:
Determine if the bug can be triggered via an untrusted peripheral device that can be physically plugged
into a system, such as a USB device or a niche hardware driver handling external hardware inputs.
This is particularly important for mobile and desktop environments where users can plug in unknown devices.
* Malicious Filesystem Trigger:
Determine if the bug can be triggered by the kernel mounting and parsing a malicious filesystem image.
This is highly critical for Desktop and Mobile environments where external media or downloaded images
might be auto-mounted.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The kernel bug report is:
------------[ cut here ]------------
WARNING: mm/vmalloc.c:4037 at __vmalloc_node_range_noprof+0x610/0x6a4 mm/vmalloc.c:4037, CPU#0: syz.1.17/4031
Modules linked in:
Kernel panic - not syncing: kernel: panic_on_warn set ...
CPU: 0 UID: 0 PID: 4031 Comm: syz.1.17 Not tainted syzkaller #0 PREEMPT
Hardware name: ARM-Versatile Express
Call trace:
[<80201998>] (dump_backtrace) from [<80201a8c>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:257)
r7:82a20f78 r6:00000000 r5:82336570 r4:00000001
[<80201a74>] (show_stack) from [<8021ec68>] (__dump_stack lib/dump_stack.c:94 [inline])
[<80201a74>] (show_stack) from [<8021ec68>] (dump_stack_lvl+0x5c/0x70 lib/dump_stack.c:120)
[<8021ec0c>] (dump_stack_lvl) from [<8021ec94>] (dump_stack+0x18/0x1c lib/dump_stack.c:129)
r7:82a20f78 r6:00000000 r5:839f1880 r4:82c85d40
[<8021ec7c>] (dump_stack) from [<80202590>] (vpanic+0x114/0x320 kernel/panic.c:651)
[<8020247c>] (vpanic) from [<802027d0>] (trace_suspend_resume+0x0/0x100 kernel/panic.c:788)
r7:805241d4
[<8020279c>] (panic) from [<80251b50>] (check_panic_on_warn kernel/panic.c:525 [inline])
[<8020279c>] (panic) from [<80251b50>] (get_taint+0x0/0x1c kernel/panic.c:520)
r3:82a0b144 r2:00000001 r1:8231c298 r0:82323c10
[<80251ad8>] (check_panic_on_warn) from [<80251ccc>] (__warn+0x98/0x1a4 kernel/panic.c:1104)
[<80251c34>] (__warn) from [<80251f50>] (warn_slowpath_fmt+0x178/0x1f4 kernel/panic.c:1136)
r8:00000009 r7:82352930 r6:dfb7dd4c r5:839f1880 r4:00000000
[<80251ddc>] (warn_slowpath_fmt) from [<805241d4>] (__vmalloc_node_range_noprof+0x610/0x6a4 mm/vmalloc.c:4037)
r10:ffffffff r9:ff800000 r8:00000dc0 r7:00000002 r6:10000000 r5:df800000
r4:00000000
[<80523bc4>] (__vmalloc_node_range_noprof) from [<805244d0>] (__vmalloc_node_noprof mm/vmalloc.c:4165 [inline])
[<80523bc4>] (__vmalloc_node_range_noprof) from [<805244d0>] (vzalloc_noprof+0x6c/0x74 mm/vmalloc.c:4243)
r10:84dd6e10 r9:00000000 r8:83970c24 r7:00000002 r6:10000000 r5:83970c00
r4:00000000
[<80524464>] (vzalloc_noprof) from [<80c2086c>] (zram_meta_alloc drivers/block/zram/zram_drv.c:1990 [inline])
[<80524464>] (vzalloc_noprof) from [<80c2086c>] (disksize_store+0x80/0x1dc drivers/block/zram/zram_drv.c:2880)
r4:00000000
[<80c207ec>] (disksize_store) from [<80bd68c0>] (dev_attr_store+0x1c/0x28 drivers/base/core.c:2505)
r10:84dd6e10 r9:00000000 r8:83578478 r7:854dc1c0 r6:81d5b598 r5:80bd68a4
r4:80c207ec r3:00000002
[<80bd68a4>] (dev_attr_store) from [<8067e3b4>] (sysfs_kf_write+0x70/0x7c fs/sysfs/file.c:145)
r5:80bd68a4 r4:00000002
[<8067e344>] (sysfs_kf_write) from [<8067c450>] (kernfs_fop_write_iter+0x134/0x214 fs/kernfs/file.c:345)
r9:00000000 r8:00000000 r7:dfb7df08 r6:84dd6e00 r5:00000002 r4:854dc1c0
[<8067c31c>] (kernfs_fop_write_iter) from [<805a1390>] (new_sync_write fs/read_write.c:595 [inline])
[<8067c31c>] (kernfs_fop_write_iter) from [<805a1390>] (vfs_write fs/read_write.c:687 [inline])
[<8067c31c>] (kernfs_fop_write_iter) from [<805a1390>] (vfs_write+0x27c/0x42c fs/read_write.c:667)
r10:81c2d60c r9:839f1880 r8:8067c31c r7:dfb7df68 r6:20000140 r5:8602aa00
r4:00000002
[<805a1114>] (vfs_write) from [<805a16b4>] (ksys_write+0x74/0xec fs/read_write.c:739)
r10:00000004 r9:839f1880 r8:8020029c r7:00000000 r6:00000000 r5:8602aa00
r4:8602aa00
[<805a1640>] (ksys_write) from [<805a173c>] (__do_sys_write fs/read_write.c:750 [inline])
[<805a1640>] (ksys_write) from [<805a173c>] (sys_write+0x10/0x14 fs/read_write.c:747)
r7:00000004 r6:00356310 r5:00000000 r4:00000000
[<805a172c>] (sys_write) from [<80200060>] (ret_fast_syscall+0x0/0x1c arch/arm/mm/proc-v7.S:67)
Exception stack(0xdfb7dfa8 to 0xdfb7dff0)
dfa0: 00000000 00000000 00000003 20000140 00000002 00000000
dfc0: 00000000 00000000 00356310 00000004 003562d8 00000000 00000008 00000000
dfe0: 7eb777a0 7eb77790 00018fa0 00130a50
Rebooting in 86400 seconds..
It is reproducible with the followint program.
Keep in mind that it may lack the precise threading, sandboxing, and some arguments of a working reproducer.
But it should give an idea of the involved syscalls.
// autogenerated by syzkaller (https://github.com/google/syzkaller)
#define _GNU_SOURCE
#include <endian.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
#ifndef __NR_mkdirat
#define __NR_mkdirat 323
#endif
#ifndef __NR_mmap
#define __NR_mmap 192
#endif
#ifndef __NR_mount
#define __NR_mount 21
#endif
#ifndef __NR_openat
#define __NR_openat 322
#endif
#ifndef __NR_write
#define __NR_write 4
#endif
#undef __NR_mmap
#define __NR_mmap __NR_mmap2
uint64_t r[1] = {0xffffffffffffffff};
int main(void)
{
syscall(__NR_mmap, /*addr=*/0x1ffff000, /*len=*/0x1000, /*prot=*/0, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
syscall(__NR_mmap, /*addr=*/0x20000000, /*len=*/0x1000000, /*prot=PROT_WRITE|PROT_READ|PROT_EXEC*/7, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
syscall(__NR_mmap, /*addr=*/0x21000000, /*len=*/0x1000, /*prot=*/0, /*flags=MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE*/0x32, /*fd=*/(intptr_t)-1, /*offset=*/0);
const char* reason;
(void)reason;
intptr_t res = 0;
if (write(1, "executing program\n", sizeof("executing program\n") - 1)) {}
// mkdirat arguments: [
// fd: fd_dir (resource)
// path: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 00} (length 0x6)
// }
// mode: open_mode = 0x1ff (4 bytes)
// ]
memcpy((void*)0x20000000, "./sys\000", 6);
syscall(__NR_mkdirat, /*fd=*/0xffffff9c, /*path=*/0x20000000, /*mode=S_IXOTH|S_IWOTH|S_IROTH|S_IXGRP|S_IWGRP|S_IRGRP|S_IXUSR|S_IWUSR|0x100*/0x1ff);
// mount arguments: [
// src: nil
// dst: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 00} (length 0x6)
// }
// type: ptr[in, buffer] {
// buffer: {73 79 73 66 73 00} (length 0x6)
// }
// flags: mount_flags = 0x0 (4 bytes)
// data: nil
// ]
memcpy((void*)0x20000000, "./sys\000", 6);
memcpy((void*)0x20000100, "sysfs\000", 6);
syscall(__NR_mount, /*src=*/0, /*dst=*/0x20000000, /*type=*/0x20000100, /*flags=*/0, /*data=*/0);
// openat arguments: [
// fd: fd_dir (resource)
// file: ptr[in, buffer] {
// buffer: {2e 2f 73 79 73 2f 62 6c 6f 63 6b 2f 7a 72 61 6d 30 2f 64 69 73 6b 73 69 7a 65 00} (length 0x1b)
// }
// flags: open_flags = 0x1 (4 bytes)
// mode: open_mode = 0x0 (2 bytes)
// ]
// returns fd
memcpy((void*)0x20000400, "./sys/block/zram0/disksize\000", 27);
res = syscall(__NR_openat, /*fd=*/0xffffff9c, /*file=*/0x20000400, /*flags=O_WRONLY*/1, /*mode=*/0);
if (res != -1)
r[0] = res;
// write arguments: [
// fd: fd (resource)
// buf: ptr[in, buffer] {
// buffer: {31 45} (length 0x2)
// }
// count: len = 0x2 (4 bytes)
// ]
memcpy((void*)0x20000140, "1E", 2);
syscall(__NR_write, /*fd=*/(intptr_t)r[0], /*buf=*/0x20000140, /*count=*/2);
return 0;
}
Reply: **Analysis of the Bug**
The bug report indicates a `WARN_ON_ONCE(!size)` triggered in `__vmalloc_node_range_noprof()` when attempting to allocate memory with a size of 0.
Following the call trace, the bug is triggered by writing to the `/sys/block/zram0/disksize` sysfs attribute. The `disksize_store()` function in `drivers/block/zram/zram_drv.c` parses the user-provided string into a `u64 disksize` and then aligns it to the page size using `PAGE_ALIGN(disksize)`.
If a very large value is written (e.g., `0xffffffffffffffff` as seen in the syzkaller reproducer), the `PAGE_ALIGN()` macro causes the value to wrap around to `0`. Consequently, `zram_meta_alloc()` calculates `num_pages = 0` and calls `vzalloc(0)`. This triggers the `WARN_ON_ONCE(!size)` in the vmalloc code.
**Exploitability and Denial of Service**
The warning is properly handled by the kernel's control flow. The `__vmalloc_node_range_noprof()` function simply returns `NULL` after emitting the warning. The caller, `zram_meta_alloc()`, correctly checks for this `NULL` return value and gracefully fails, causing `disksize_store()` to return `-ENOMEM`.
There is no memory corruption, out-of-bounds access, or resource leak. In a production environment where `panic_on_warn` is disabled, the system will just log the warning and continue executing normally. Therefore, this bug is neither exploitable nor does it cause a denial of service.
**Accessibility**
The sysfs attribute `/sys/block/zram0/disksize` is created with `0644` permissions and is owned by the global `root` user.
- **Unprivileged Processes:** A typical non-root user cannot write to this file due to the DAC permissions.
- **User Namespaces:** If an unprivileged user creates a new user namespace and mounts `sysfs`, the file will still be owned by the global root user. Since the global root UID is not mapped in the unprivileged user's namespace, the file's owner will appear as `nobody` (or `overflowuid`). The user will not have `CAP_DAC_OVERRIDE` privileges over files owned by unmapped UIDs, meaning they still cannot write to the file.
Thus, the bug is strictly reachable only by a globally privileged user (root).
**Other Triggers**
The bug is isolated to the sysfs configuration interface of the `zram` block device. It cannot be triggered via network traffic, peripheral devices, malicious filesystems, or from within a VM guest.
|
| 6/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 9952
output: 25
thoughts: 160
Thoughts: **Investigating a vmalloc Warning**
Okay, so I've got a warning flagged in `mm/vmalloc.c` at line 4037 – specifically within `__vmalloc_node_range_noprof`. The trace is helpful; it shows the call stack leading to it: `__vmalloc_node_range_noprof` -> `__vmalloc_node_noprof` -> `vzalloc_noprof` -> `zram_meta_alloc` -> `disksize_store` -> `dev_attr_store` -> `sysfs_kf_write` -> `kernfs_fop_write_iter` -> `vfs_write` -> `ksys_write` -> `sys_write`. That's a pretty clear path to follow.
My initial thought is to dive into `mm/vmalloc.c` and zero in on that section of code around line 4037. This should give me a good understanding of what's happening at the point where the warning is triggered. I need to figure out the conditions that are causing this particular warning to occur within `__vmalloc_node_range_noprof` and then assess the implications of the warning. With the call trace, I can look at the code paths involved from the start of the process (`sys_write`) to the warning. It looks like we're dealing with a `vmalloc` issue related to ZRAM meta allocation, triggered during a write operation. Time to get my hands dirty.
|
| 7/2 |
2026/09/13 00:28 |
tool |
grepper |
0m
Args: map[Expression:__vmalloc_node_range_noprof]
Results: map[Output:include/linux/vmalloc.h=171=extern void *__vmalloc_noprof(unsigned long size, gfp_t gfp_mask) __alloc_size(1);
--
include/linux/vmalloc.h-173-
include/linux/vmalloc.h:174:extern void *__vmalloc_node_range_noprof(unsigned long size, unsigned long align,
include/linux/vmalloc.h-175- unsigned long start, unsigned long end, gfp_t gfp_mask,
--
include/linux/vmalloc.h-177- const void *caller) __alloc_size(1);
include/linux/vmalloc.h:178:#define __vmalloc_node_range(...) alloc_hooks(__vmalloc_node_range_noprof(__VA_ARGS__))
include/linux/vmalloc.h-179-
--
mm/nommu.c=122=void *vrealloc_node_align_noprof(const void *p, size_t size, unsigned long align,
--
mm/nommu.c-127-
mm/nommu.c:128:void *__vmalloc_node_range_noprof(unsigned long size, unsigned long align,
mm/nommu.c-129- unsigned long start, unsigned long end, gfp_t gfp_mask,
--
mm/slub.c=6890=void *__kvmalloc_node_noprof(DECL_KMALLOC_PARAMS(size, b, token), unsigned long align,
--
mm/slub.c-6932- */
mm/slub.c:6933: return __vmalloc_node_range_noprof(size, align, VMALLOC_START, VMALLOC_END,
mm/slub.c-6934- flags, PAGE_KERNEL, allow_block ? VM_ALLOW_HUGE_VMAP:0,
--
mm/vmalloc.c=3865=static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
--
mm/vmalloc.c-3910- *
mm/vmalloc.c:3911: * Please note, the __vmalloc_node_range_noprof() falls-back
mm/vmalloc.c-3912- * to order-0 pages if high-order attempt is unsuccessful.
--
mm/vmalloc.c=3980=static gfp_t vmalloc_fix_flags(gfp_t flags)
--
mm/vmalloc.c-4024- */
mm/vmalloc.c:4025:void *__vmalloc_node_range_noprof(unsigned long size, unsigned long align,
mm/vmalloc.c-4026- unsigned long start, unsigned long end, gfp_t gfp_mask,
--
mm/vmalloc.c-4157- * Semantics of @gfp_mask (including reclaim/retry modifiers such as
mm/vmalloc.c:4158: * __GFP_NOFAIL) are the same as in __vmalloc_node_range_noprof().
mm/vmalloc.c-4159- *
--
mm/vmalloc.c=4162=void *__vmalloc_node_noprof(unsigned long size, unsigned long align,
--
mm/vmalloc.c-4164-{
mm/vmalloc.c:4165: return __vmalloc_node_range_noprof(size, align, VMALLOC_START, VMALLOC_END,
mm/vmalloc.c-4166- gfp_mask, PAGE_KERNEL, 0, node, caller);
--
mm/vmalloc.c=4218=void *vmalloc_huge_node_noprof(unsigned long size, gfp_t gfp_mask, int node)
--
mm/vmalloc.c-4221- gfp_mask = vmalloc_fix_flags(gfp_mask);
mm/vmalloc.c:4222: return __vmalloc_node_range_noprof(size, 1, VMALLOC_START, VMALLOC_END,
mm/vmalloc.c-4223- gfp_mask, PAGE_KERNEL, VM_ALLOW_HUGE_VMAP,
--
mm/vmalloc.c=4257=void *vmalloc_user_noprof(unsigned long size)
mm/vmalloc.c-4258-{
mm/vmalloc.c:4259: return __vmalloc_node_range_noprof(size, SHMLBA, VMALLOC_START, VMALLOC_END,
mm/vmalloc.c-4260- GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL,
--
mm/vmalloc.c=4504=void *vmalloc_32_user_noprof(unsigned long size)
mm/vmalloc.c-4505-{
mm/vmalloc.c:4506: return __vmalloc_node_range_noprof(size, SHMLBA, VMALLOC_START, VMALLOC_END,
mm/vmalloc.c-4507- GFP_VMALLOC32 | __GFP_ZERO, PAGE_KERNEL,
]
|
| 8/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 11779
output: 35
thoughts: 19
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into `mm/vmalloc.c`**
Okay, let's zero in on `mm/vmalloc.c` and specifically around line 4037. I'm probably looking at this section because of a memory allocation issue, perhaps related to `vmalloc`'s behavior under contention, a fragmentation problem, or maybe a potential memory leak. Line 4037 usually places you somewhere in the allocation or deallocation paths. I'm going to quickly refresh myself on the surrounding code... I'm particularly interested in how the `vmalloc` implementation handles page table setup, especially with respect to the underlying `vmap` calls, any potential spinlocks involved, and what happens when the requested memory chunk spans multiple pages or physical memory regions. I'll be paying close attention to the error handling paths and how different allocation failures are reported and handled – are we getting `ENOMEM`, or something more specific? I'll probably also check if there are any `WARN_ON` statements near this location, that can give important clues. Ultimately, my goal is to figure out the root cause of this specific observed behavior, or to understand how the allocation system works for a specific scenario I'm currently investigating.
|
| 9/2 |
2026/09/13 00:28 |
tool |
read-file |
0m
Args: map[File:mm/vmalloc.c FirstLine:4010 LineCount:50]
Results: map[Contents:4010: * by __vmalloc().
4011: *
4012: * Retry modifiers: only %__GFP_NOFAIL is fully supported;
4013: * %__GFP_NORETRY and %__GFP_RETRY_MAYFAIL are supported with limitation,
4014: * i.e. page tables are allocated with NOWAIT semantic so they might fail
4015: * under moderate memory pressure.
4016: *
4017: * %__GFP_NOWARN can be used to suppress failure messages.
4018: *
4019: * %__GFP_SKIP_KASAN can be used to skip unpoisoning of mapped pages
4020: * (when prot=%PAGE_KERNEL).
4021: *
4022: * Can not be called from interrupt nor NMI contexts.
4023: * Return: the address of the area or %NULL on failure
4024: */
4025: void *__vmalloc_node_range_noprof(unsigned long size, unsigned long align,
4026: unsigned long start, unsigned long end, gfp_t gfp_mask,
4027: pgprot_t prot, unsigned long vm_flags, int node,
4028: const void *caller)
4029: {
4030: struct vm_struct *area;
4031: void *ret;
4032: kasan_vmalloc_flags_t kasan_flags = KASAN_VMALLOC_NONE;
4033: unsigned long original_align = align;
4034: unsigned int shift = PAGE_SHIFT;
4035: bool skip_vmalloc_kasan = kasan_hw_tags_enabled() && (gfp_mask & __GFP_SKIP_KASAN);
4036:
4037: if (WARN_ON_ONCE(!size))
4038: return NULL;
4039:
4040: if ((size >> PAGE_SHIFT) > totalram_pages()) {
4041: warn_alloc(gfp_mask, NULL,
4042: "vmalloc error: size %lu, exceeds total pages",
4043: size);
4044: return NULL;
4045: }
4046:
4047: if (vmap_allow_huge && (vm_flags & VM_ALLOW_HUGE_VMAP)) {
4048: /*
4049: * Try huge pages. Only try for PAGE_KERNEL allocations,
4050: * others like modules don't yet expect huge pages in
4051: * their allocations due to apply_to_page_range not
4052: * supporting them.
4053: */
4054:
4055: if (arch_vmap_pmd_supported(prot) && size >= PMD_SIZE)
4056: shift = PMD_SHIFT;
4057: else
4058: shift = arch_vmap_pte_supported_shift(size);
4059:
]
|
| 10/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 12932
output: 42
thoughts: 83
Thoughts: Here's my analysis of the situation:
**Investigating a ZRAM Allocation Issue**
Okay, so I've got a `WARN_ON_ONCE(!size)` warning popping up. That immediately tells me that `size` is equal to 0, which is the root of the problem. Looking at the call trace, it's clear the error originates in a chain of function calls: `vzalloc_noprof` -> `zram_meta_alloc` -> `disksize_store`. This suggests a memory allocation within ZRAM is failing. I need to dive into the ZRAM driver code. Based on the trace, I will check `drivers/block/zram/zram_drv.c` around line 2880, as this appears to be the point of failure. I expect the code there is related to disk size or metadata allocation, given the functions involved. I need to quickly identify why `size` could be zero in that specific context.
|
| 11/2 |
2026/09/13 00:28 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.c FirstLine:2860 LineCount:50]
Results: map[Contents:2860: static ssize_t disksize_store(struct device *dev, struct device_attribute *attr,
2861: const char *buf, size_t len)
2862: {
2863: u64 disksize;
2864: struct zcomp *comp;
2865: struct zram *zram = dev_to_zram(dev);
2866: int err;
2867: u32 prio;
2868:
2869: disksize = memparse(buf, NULL);
2870: if (!disksize)
2871: return -EINVAL;
2872:
2873: guard(rwsem_write)(&zram->dev_lock);
2874: if (init_done(zram)) {
2875: pr_info("Cannot change disksize for initialized device\n");
2876: return -EBUSY;
2877: }
2878:
2879: disksize = PAGE_ALIGN(disksize);
2880: if (!zram_meta_alloc(zram, disksize))
2881: return -ENOMEM;
2882:
2883: for (prio = ZRAM_PRIMARY_COMP; prio < ZRAM_MAX_COMPS; prio++) {
2884: if (!zram->comp_algs[prio])
2885: continue;
2886:
2887: comp = zcomp_create(zram->comp_algs[prio],
2888: &zram->params[prio]);
2889: if (IS_ERR(comp)) {
2890: pr_err("Cannot initialise %s compressing backend\n",
2891: zram->comp_algs[prio]);
2892: err = PTR_ERR(comp);
2893: goto out_free_comps;
2894: }
2895:
2896: zram->comps[prio] = comp;
2897: }
2898: zram->disksize = disksize;
2899: set_capacity_and_notify(zram->disk, zram->disksize >> SECTOR_SHIFT);
2900:
2901: return len;
2902:
2903: out_free_comps:
2904: zram_destroy_comps(zram);
2905: zram_meta_free(zram, disksize);
2906: return err;
2907: }
2908:
2909: static ssize_t reset_store(struct device *dev,
]
|
| 12/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 14008
output: 19
thoughts: 95
Thoughts: **Analyzing Potential Integer Overflow in Disk Size Calculation**
Okay, so I'm looking at this code snippet, and I'm immediately focused on the `disksize` variable. It's crucial, obviously, and it's being parsed from `buf` using `memparse`. The result of that parsing is assigned to `disksize` and then we have the safety check: If it's zero, we're returning -EINVAL. Seems reasonable enough, preventing garbage input.
The bit that's snagging my attention, though, is the `PAGE_ALIGN(disksize)` call. That's where things could get interesting, especially if the initial `disksize` value is a very large number, like `0xffffffffffffffff`. My gut is telling me that's a prime candidate for an integer overflow.
Let me refresh my understanding of how `PAGE_ALIGN` works. If `disksize` is enormous, the alignment process *could* cause it to wrap around to zero, or at least a very small value. That would effectively make `disksize` unusable for its intended purpose. I'll need to double check the actual alignment calculation in the context of the page size to confirm that it's doing what I think it is. I need to be sure this is handled correctly because a miscalculated `disksize` could lead to some significant problems down the line. We need to prevent such overflows from occurring, likely by implementing a sanity check, before `PAGE_ALIGN` is called, ensuring `disksize` stays within sensible bounds.
|
| 13/2 |
2026/09/13 00:28 |
tool |
grepper |
0m
Args: map[Expression:#define PAGE_ALIGN]
Results: map[Output:arch/powerpc/boot/page.h-27-/* to align the pointer to the (next) page boundary */
arch/powerpc/boot/page.h:28:#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
arch/powerpc/boot/page.h-29-
--
include/asm-generic/vmlinux.lds.h-410-
include/asm-generic/vmlinux.lds.h:411:#define PAGE_ALIGNED_DATA(page_align) \
include/asm-generic/vmlinux.lds.h-412- . = ALIGN(page_align); \
--
include/linux/mm.h=216=static inline bool page_range_contiguous(const struct page *page,
--
include/linux/mm.h-223-/* to align the pointer to the (next) page boundary */
include/linux/mm.h:224:#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
include/linux/mm.h-225-
include/linux/mm.h-226-/* to align the pointer to the (prev) page boundary */
include/linux/mm.h:227:#define PAGE_ALIGN_DOWN(addr) ALIGN_DOWN(addr, PAGE_SIZE)
include/linux/mm.h-228-
include/linux/mm.h-229-/* test whether an address (unsigned long or pointer) is aligned to PAGE_SIZE */
include/linux/mm.h:230:#define PAGE_ALIGNED(addr) IS_ALIGNED((unsigned long)(addr), PAGE_SIZE)
include/linux/mm.h-231-
--
tools/include/linux/mm.h-14-
tools/include/linux/mm.h:15:#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
tools/include/linux/mm.h:16:#define PAGE_ALIGN_DOWN(addr) ALIGN_DOWN(addr, PAGE_SIZE)
tools/include/linux/mm.h-17-
--
tools/testing/scatterlist/linux/mm.h=11=typedef unsigned long dma_addr_t;
--
tools/testing/scatterlist/linux/mm.h-37-
tools/testing/scatterlist/linux/mm.h:38:#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
tools/testing/scatterlist/linux/mm.h-39-
--
tools/testing/selftests/mm/mlock-random-test.c-24-#define TEST_LOOP 100
tools/testing/selftests/mm/mlock-random-test.c:25:#define PAGE_ALIGN(size, ps) (((size) + ((ps) - 1)) & ~((ps) - 1))
tools/testing/selftests/mm/mlock-random-test.c-26-
--
tools/virtio/linux/kernel.h-28-#define PAGE_MASK (~(PAGE_SIZE-1))
tools/virtio/linux/kernel.h:29:#define PAGE_ALIGN(x) ((x + PAGE_SIZE - 1) & PAGE_MASK)
tools/virtio/linux/kernel.h-30-
]
|
| 14/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 15254
output: 42
thoughts: 120
Thoughts: **My Analysis of a Potential ZRAM Disk Size Issue**
Okay, so I'm looking at this `ALIGN(addr, PAGE_SIZE)` macro – pretty standard stuff, right? It's just a bitwise operation to round up an address to the nearest page boundary: `(((addr) + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1))`. Seems straightforward. But then I see this scenario where `disksize` is effectively a maximum value, `0xffffffffffffffff`. That's where things get interesting, or potentially, troublesome.
If I add `PAGE_SIZE - 1` to that maximum `disksize` value, I'm going to hit an integer overflow, right? The result of that addition, thanks to the way unsigned integers work, will wrap around to `PAGE_SIZE - 2`. Then, when I do the bitwise AND with the bitwise complement of `PAGE_SIZE - 1`, that will result in zero. So `disksize` *effectively* gets set to zero, even though it started out at its maximum value.
And that's what's worrying me. Because after that, `zram_meta_alloc(zram, disksize)` is called with a `disksize` of zero. This is a critical point. That might not be what the system intended, and it could lead to the ZRAM device being unusable or misconfigured. There is probably code later in the routine that expects `disksize` to have a reasonable value, perhaps related to the amount of memory allocated to the device. This truncation of the original size could result in undefined behavior and errors.
|
| 15/2 |
2026/09/13 00:28 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.c FirstLine:1970 LineCount:50]
Results: map[Contents:1970: size_t num_pages = disksize >> PAGE_SHIFT;
1971: size_t index;
1972:
1973: if (!zram->table)
1974: return;
1975:
1976: /* Free all pages that are still in this zram device */
1977: for (index = 0; index < num_pages; index++)
1978: slot_free(zram, index);
1979:
1980: zs_destroy_pool(zram->mem_pool);
1981: vfree(zram->table);
1982: zram->table = NULL;
1983: }
1984:
1985: static bool zram_meta_alloc(struct zram *zram, u64 disksize)
1986: {
1987: size_t num_pages, index;
1988:
1989: num_pages = disksize >> PAGE_SHIFT;
1990: zram->table = vzalloc(array_size(num_pages, sizeof(*zram->table)));
1991: if (!zram->table)
1992: return false;
1993:
1994: zram->mem_pool = zs_create_pool(zram->disk->disk_name);
1995: if (!zram->mem_pool) {
1996: vfree(zram->table);
1997: zram->table = NULL;
1998: return false;
1999: }
2000:
2001: if (!huge_class_size)
2002: huge_class_size = zs_huge_class_size(zram->mem_pool);
2003:
2004: for (index = 0; index < num_pages; index++)
2005: slot_lock_init(zram, index);
2006:
2007: return true;
2008: }
2009:
2010: static void slot_free(struct zram *zram, u32 index)
2011: {
2012: unsigned long handle;
2013:
2014: #ifdef CONFIG_ZRAM_TRACK_ENTRY_ACTIME
2015: zram->table[index].attr.ac_time = 0;
2016: #endif
2017:
2018: clear_slot_flag(zram, index, ZRAM_IDLE);
2019: clear_slot_flag(zram, index, ZRAM_INCOMPRESSIBLE);
]
|
| 16/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 16503
output: 20
thoughts: 474
Thoughts: **My Analysis of the ZRAM Disksize Zero-Page Allocation**
Okay, let's break this down. The code calculates `num_pages` by right-shifting `disksize` by `PAGE_SHIFT`. If `disksize` happens to be zero, `num_pages` is also zero. That's the crux of it.
Then, we try to allocate memory for the zram metadata table: `zram->table = vzalloc(array_size(num_pages, sizeof(*zram->table)));`. Since `num_pages` is zero, `array_size` also returns zero, so `vzalloc(0)` is called. And that's where the fun begins.
`vzalloc(0)` internally calls `__vmalloc_node_range_noprof` with a size of zero. This triggers a `WARN_ON_ONCE(!size)`, meaning it issues a warning if the allocation size is zero. The warning is the key here.
Now, `__vmalloc_node_range_noprof` *returns* `NULL` when `size` is zero, even though it also warns. So `vzalloc(0)` also returns `NULL`. The subsequent check `if (!zram->table) return false;` catches this. The `zram_meta_alloc` function returns `false`, which then causes `disksize_store` to return `-ENOMEM`. Makes perfect sense.
My initial thought was, "Is there a memory corruption or potential denial of service here?" The thing that jumps out is the warning, because in the syzkaller environment, `panic_on_warn` is set. This makes it a kernel panic. *But* in a real-world, production environment, `panic_on_warn` is *not* set. So, in a production environment, this means a warning message gets printed to the kernel log with a stack trace. The system continues to run.
So, in production, there's no memory corruption, no crash, no hang. It isn't a denial-of-service, it's just an edge case. Specifically, it's an unhandled edge case where `disksize` wraps to zero.
The real question is: is there *any* other consequence? What happens if `disksize_store` returns `-ENOMEM`? The `zram` device's state remains unchanged. This means it is still accessible from unprivileged processes, which are writing to the `/sys/block/zram0/disksize` file.
Now, I need to check the permissions of that sysfs file to be sure. I'm not seeing an immediate critical vulnerability, but I should check the permissions on `/sys/block/zram0/disksize`. It's a non-issue as it is a read-write value, and returns a error, that's not a security issue, it's an edge case.
|
| 17/2 |
2026/09/13 00:28 |
tool |
grepper |
0m
Args: map[Expression:DEVICE_ATTR.*disksize]
Results: map[Output:drivers/block/zram/zram_drv.c=2971=static DEVICE_ATTR_WO(compact);
drivers/block/zram/zram_drv.c:2972:static DEVICE_ATTR_RW(disksize);
drivers/block/zram/zram_drv.c-2973-static DEVICE_ATTR_RO(initstate);
]
|
| 18/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 17727
output: 21
thoughts: 57
Thoughts: **Examining the Permission Assignment of a Device Attribute File**
Okay, so `DEVICE_ATTR_RW(disksize)` creates a file, right? And I recall that file having specific permissions. Right, it's created with `0644` permissions. That seems a bit odd; I would have expected a more controlled permission set. Hold on, let me quickly double-check that. I need to be absolutely certain how the underlying macro, `DEVICE_ATTR_RW`, handles permissions. Time to dig into the macro definition itself to understand how this `0644` assignment is happening under the hood. I know there's a good reason for it, so let's track it down!
|
| 19/2 |
2026/09/13 00:28 |
tool |
grepper |
0m
Args: map[Expression:#define DEVICE_ATTR_RW]
Results: map[Output:include/linux/device.h=149=typedef ssize_t __device_store_handler_const(struct device *dev, const struct device_attribute *attr,
--
include/linux/device.h-246- */
include/linux/device.h:247:#define DEVICE_ATTR_RW(_name) \
include/linux/device.h-248- struct device_attribute dev_attr_##_name = __DEVICE_ATTR_RW(_name)
--
include/linux/device.h-267- */
include/linux/device.h:268:#define DEVICE_ATTR_RW_NAMED(_name, _attrname) \
include/linux/device.h-269- struct device_attribute dev_attr_##_name = { \
]
|
| 20/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 18155
output: 22
thoughts: 12
Thoughts: Here's my take on those thoughts:
**Checking the Read/Write Device Attribute**
Okay, so I'm thinking, let's just make absolutely sure we're on the right track here. Time to double-check that `__DEVICE_ATTR_RW` macro, just to be crystal clear. I know I’ve been over this code a thousand times, and I *think* I’ve got it nailed, but it's always worth a quick sanity check, especially with something this fundamental. We can't afford any slip-ups in the basic building blocks. A misstep there can lead to cascading problems down the line. Let's make sure that read/write attribute is behaving as expected, before we go any further. Gotta have my ducks in a row.
|
| 21/2 |
2026/09/13 00:28 |
tool |
grepper |
0m
Args: map[Expression:#define __DEVICE_ATTR_RW]
Results: map[Output:include/linux/device.h=149=typedef ssize_t __device_store_handler_const(struct device *dev, const struct device_attribute *attr,
--
include/linux/device.h-201-
include/linux/device.h:202:#define __DEVICE_ATTR_RW_MODE(_name, _mode) \
include/linux/device.h-203- __DEVICE_ATTR(_name, _mode, _name##_show, _name##_store)
include/linux/device.h-204-
include/linux/device.h:205:#define __DEVICE_ATTR_RW(_name) \
include/linux/device.h-206- __DEVICE_ATTR_RW_MODE(_name, 0644)
]
|
| 22/2 |
2026/09/13 00:28 |
llm |
expert |
0m
Model:
Tokens:
input: 18554
output: 21
thoughts: 647
Thoughts: **Analyzing Sysfs and User Namespaces**
Okay, so I'm looking at this file's permissions – `0644`. Root has write access, but regular users only have read. Now, the question is, can an unprivileged user actually *write* to a sysfs file if they're operating within a user namespace? The reproducer code is attempting to do just that, creating a directory, mounting, opening, and then writing.
My initial thought is that sysfs is mounted within a new user namespace. If that's the case, an unprivileged user *could* set up their own user and mount namespace. But does mounting sysfs in the user namespace *guarantee* write access to something like `/sys/block/zram0/disksize`?
Typically, those sysfs files have root ownership in the original namespace. When sysfs is mounted in a user namespace, I'd expect the ownership to shift to something like `nobody:nobody` or `overflowuid`. That means the user *inside* the namespace wouldn't inherently have write access, unless the namespace mapped the initial root uid to a uid they control (which, as an unprivileged user, they don't).
However, wait a second. If an unprivileged user *creates* the user namespace, the root within that namespace is actually mapped to *their* user ID, isn't it? But, sysfs files are still owned by the *global* root (UID 0). Since the global root isn't mapped inside the user namespace, it's going to show up as `nobody` (probably 65534). So the user in the namespace, even though they're root *in that namespace*, won't have the required privileges over files owned by `nobody`.
I need to confirm whether sysfs can even be mounted inside a user namespace. Yes, sysfs *can* be mounted within a user namespace if the user has `CAP_SYS_ADMIN` in that namespace. But even then, the files inside will retain their ownership from the initial namespace, meaning they'll still be owned by `GLOBAL_ROOT_UID`. I need to check if sysfs employs `FS_USERNS_MOUNT` to ensure this behaviour.
|
| 23/2 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:FS_USERNS_MOUNT]
Results: map[Output:drivers/android/binder/rust_binderfs.c=753=static struct file_system_type binder_fs_type = {
--
drivers/android/binder/rust_binderfs.c-757- .kill_sb = binderfs_kill_super,
drivers/android/binder/rust_binderfs.c:758: .fs_flags = FS_USERNS_MOUNT,
drivers/android/binder/rust_binderfs.c-759-};
--
drivers/android/binderfs.c=749=static struct file_system_type binder_fs_type = {
--
drivers/android/binderfs.c-753- .kill_sb = binderfs_kill_super,
drivers/android/binderfs.c:754: .fs_flags = FS_USERNS_MOUNT,
drivers/android/binderfs.c-755-};
--
fs/binfmt_misc.c=1667=static struct file_system_type bm_fs_type = {
--
fs/binfmt_misc.c-1670- .init_fs_context = bm_init_fs_context,
fs/binfmt_misc.c:1671: .fs_flags = FS_USERNS_MOUNT,
fs/binfmt_misc.c-1672- .kill_sb = bm_kill_sb,
--
fs/devpts/inode.c=453=static struct file_system_type devpts_fs_type = {
--
fs/devpts/inode.c-457- .kill_sb = devpts_kill_sb,
fs/devpts/inode.c:458: .fs_flags = FS_USERNS_MOUNT,
fs/devpts/inode.c-459-};
--
fs/fuse/inode.c=2001=static struct file_system_type fuse_fs_type = {
--
fs/fuse/inode.c-2003- .name = "fuse",
fs/fuse/inode.c:2004: .fs_flags = FS_HAS_SUBTYPE | FS_USERNS_MOUNT | FS_ALLOW_IDMAP,
fs/fuse/inode.c-2005- .init_fs_context = fuse_init_fs_context,
--
fs/namespace.c=1076=static void mnt_add_to_ns(struct mnt_namespace *ns, struct mount *mnt)
--
fs/namespace.c-1101-
fs/namespace.c:1102: if ((mnt->mnt.mnt_sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED) &&
fs/namespace.c-1103- mnt->mnt.mnt_root == mnt->mnt.mnt_sb->s_root)
--
fs/namespace.c=6426=static bool mount_too_revealing(const struct super_block *sb, int *new_mnt_flags)
--
fs/namespace.c-6435- /* Can this filesystem be too revealing? */
fs/namespace.c:6436: if (!(sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED))
fs/namespace.c-6437- return false;
--
fs/overlayfs/params.c=782=static const struct fs_context_operations ovl_context_ops = {
--
fs/overlayfs/params.c-791- * This is called during fsopen() and will record the user namespace of
fs/overlayfs/params.c:792: * the caller in fc->user_ns since we've raised FS_USERNS_MOUNT. We'll
fs/overlayfs/params.c-793- * need it when we actually create the superblock to verify that the
--
fs/overlayfs/super.c=1572=struct file_system_type ovl_fs_type = {
--
fs/overlayfs/super.c-1576- .parameters = ovl_parameter_spec,
fs/overlayfs/super.c:1577: .fs_flags = FS_USERNS_MOUNT | FS_ALLOW_IDMAP,
fs/overlayfs/super.c-1578- .kill_sb = kill_anon_super,
--
fs/proc/root.c=369=static struct file_system_type proc_fs_type = {
--
fs/proc/root.c-373- .kill_sb = proc_kill_sb,
fs/proc/root.c:374: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED | FS_DISALLOW_NOTIFY_PERM,
fs/proc/root.c-375-};
--
fs/ramfs/inode.c=317=static struct file_system_type ramfs_fs_type = {
--
fs/ramfs/inode.c-321- .kill_sb = ramfs_kill_sb,
fs/ramfs/inode.c:322: .fs_flags = FS_USERNS_MOUNT,
fs/ramfs/inode.c-323-};
--
fs/super.c=817=bool mount_capable(struct fs_context *fc)
fs/super.c-818-{
fs/super.c:819: if (!(fc->fs_type->fs_flags & FS_USERNS_MOUNT))
fs/super.c-820- return capable(CAP_SYS_ADMIN);
--
fs/super.c=857=struct super_block *sget_fc(struct fs_context *fc,
--
fs/super.c-866- /*
fs/super.c:867: * Never allow s_user_ns != &init_user_ns when FS_USERNS_MOUNT or
fs/super.c-868- * FS_USERNS_DELEGATABLE is not set, as the filesystem is likely
--
fs/super.c-872- if (user_ns != &init_user_ns &&
fs/super.c:873: !(fc->fs_type->fs_flags & (FS_USERNS_MOUNT | FS_USERNS_DELEGATABLE))) {
fs/super.c-874- errorfc(fc, "VFS: Mounting from non-initial user namespace is not allowed");
--
fs/sysfs/mount.c=78=static struct file_system_type sysfs_fs_type = {
--
fs/sysfs/mount.c-81- .kill_sb = sysfs_kill_sb,
fs/sysfs/mount.c:82: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED,
fs/sysfs/mount.c-83-};
--
include/linux/fs.h=2286=struct file_system_type {
--
include/linux/fs.h-2291-#define FS_HAS_SUBTYPE 4
include/linux/fs.h:2292:#define FS_USERNS_MOUNT 8 /* Can be mounted by userns root */
include/linux/fs.h-2293-#define FS_DISALLOW_NOTIFY_PERM 16 /* Disable fanotify permission events */
--
include/linux/fs.h-2297-#define FS_POWER_FREEZE 256 /* Always freeze on suspend/hibernate */
include/linux/fs.h:2298:#define FS_USERNS_MOUNT_RESTRICTED 512 /* Restrict mount in userns if not already visible */
include/linux/fs.h-2299-#define FS_USERNS_DELEGATABLE 1024 /* Can be mounted inside userns from outside */
--
ipc/mqueue.c=1612=static struct file_system_type mqueue_fs_type = {
--
ipc/mqueue.c-1615- .kill_sb = kill_anon_super,
ipc/mqueue.c:1616: .fs_flags = FS_USERNS_MOUNT,
ipc/mqueue.c-1617-};
--
kernel/acct.c=216=static int acct_on(const char __user *name)
--
kernel/acct.c-251- /* Exclude procfs and sysfs. */
kernel/acct.c:252: if (file_inode(file)->i_sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED)
kernel/acct.c-253- return -EINVAL;
--
kernel/bpf/inode.c=1277=static struct file_system_type bpf_fs_type = {
--
kernel/bpf/inode.c-1282- .kill_sb = bpf_kill_super,
kernel/bpf/inode.c:1283: .fs_flags = FS_USERNS_MOUNT,
kernel/bpf/inode.c-1284-};
--
kernel/cgroup/cgroup.c=2388=struct file_system_type cgroup_fs_type = {
--
kernel/cgroup/cgroup.c-2392- .kill_sb = cgroup_kill_sb,
kernel/cgroup/cgroup.c:2393: .fs_flags = FS_USERNS_MOUNT,
kernel/cgroup/cgroup.c-2394-};
--
kernel/cgroup/cgroup.c=2396=static struct file_system_type cgroup2_fs_type = {
--
kernel/cgroup/cgroup.c-2400- .kill_sb = cgroup_kill_sb,
kernel/cgroup/cgroup.c:2401: .fs_flags = FS_USERNS_MOUNT,
kernel/cgroup/cgroup.c-2402-};
--
kernel/cgroup/cgroup.c=2469=static struct file_system_type cpuset_fs_type = {
--
kernel/cgroup/cgroup.c-2472- .parameters = cpuset_fs_parameters,
kernel/cgroup/cgroup.c:2473: .fs_flags = FS_USERNS_MOUNT,
kernel/cgroup/cgroup.c-2474-};
--
mm/shmem.c=5280=static struct file_system_type shmem_fs_type = {
--
mm/shmem.c-5287- .kill_sb = kill_anon_super,
mm/shmem.c:5288: .fs_flags = FS_USERNS_MOUNT | FS_ALLOW_IDMAP | FS_MGTIME,
mm/shmem.c-5289-};
--
mm/shmem.c=5712=static struct file_system_type shmem_fs_type = {
--
mm/shmem.c-5716- .kill_sb = ramfs_kill_sb,
mm/shmem.c:5717: .fs_flags = FS_USERNS_MOUNT,
mm/shmem.c-5718-};
--
tools/testing/selftests/exec/binfmt_misc_interplimit.c-5- * the mount it came from. It costs no file descriptor, and binfmt_misc is
tools/testing/selftests/exec/binfmt_misc_interplimit.c:6: * FS_USERNS_MOUNT, so an unprivileged user namespace can create them without
tools/testing/selftests/exec/binfmt_misc_interplimit.c-7- * bound. Check that UCOUNT_BINFMT_MISC_INTERPRETERS bounds it, that an entry
--
tools/testing/selftests/exec/binfmt_misc_selfpin.c-9- *
tools/testing/selftests/exec/binfmt_misc_selfpin.c:10: * Runs unprivileged in a user namespace; binfmt_misc is FS_USERNS_MOUNT.
tools/testing/selftests/exec/binfmt_misc_selfpin.c-11- */
--
tools/testing/selftests/filesystems/fscontext_ns/fscontext_ns_test.c-12- * socket. vfs_cmd_create() authorizes the create with mount_capable(),
tools/testing/selftests/filesystems/fscontext_ns/fscontext_ns_test.c:13: * which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN),
tools/testing/selftests/filesystems/fscontext_ns/fscontext_ns_test.c-14- * and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of
]
|
| 24/2 |
2026/09/13 00:29 |
llm |
expert |
0m
Model:
Tokens:
input: 22931
output: 51
thoughts: 314
Thoughts: **My Reasoning on `sysfs` and User Namespaces**
Okay, so `sysfs` is marked with `FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED`. That means it *can* be mounted within a user namespace, but only if it's already visible in the initial namespace, which is expected. And, importantly, the file ownership will remain the *same* as in the initial namespace.
Now, let's look at `/sys/block/zram0/disksize`. If that's owned by `root:root` in the initial namespace, and an unprivileged user namespace *doesn't* map the initial root UID, I should expect that file to appear as `nobody:nobody` within the user namespace.
Which means, even if I'm root *inside* that unprivileged user namespace, I shouldn't be able to write to it. I'm essentially operating outside of the permissions of the `nobody` user, and therefore my root privilege would not be sufficient. That feels right, but...wait a minute, is that *completely* accurate? I better double-check the permissions on `sysfs`.
Let me think this through. When a user creates a user namespace, their own UID gets mapped to 0, which is the root within the namespace. The global root UID (0 in the initial namespace) will be mapped to 65534, which is `nobody`. I get it; I'm UID 0 within the namespace, but that doesn't automatically mean I have carte blanche. I don't have privileges that override `nobody`'s files, since that UID isn't mapped to my namespace.
Oh, that's it! `CAP_DAC_OVERRIDE` in a user namespace *only* applies to files where the UID/GID are mapped into the *current* namespace. That makes perfect sense. I need to verify this assumption to be absolutely sure.
|
| 25/2 |
2026/09/13 00:29 |
tool |
codeexpert |
1m
Error:
Args: map[Question:If an unprivileged user creates a user namespace and mounts sysfs, can they write to a sysfs file that has 0644 permissions and is owned by global root?]
|
| 26/3 |
2026/09/13 00:29 |
agent |
codeexpert |
1m
Model:
Error:
Instruction:
You are a capable Linux kernel developer tasked with researching complex questions
about kernel source code. You will be given a concrete question, and need to provide
a concrete answer.
Research the question using targeted, efficient tool calls. Don't make assumptions,
or rely on your previous knowledge about the kernel source code, use available tools
to access the actual source code. Keep your tool calls focused and limited to the
scope of the question. Do not explore tangential code paths or perform unbounded searches.
Use all available sources of information:
- kernel source code
- documentation in the Documentation dir in the source tree
- git commits descriptions, git blame
Do not guess file names or file paths and attempt to read them without
verifying their existence first using content search or directory listing tools.
If a file, symbol, or directory is not found via content search (grepper) or
directory listing (codesearch-dir-index), treat it as completely absent.
Do not attempt to guess alternative names, extensions, or directories.
Tool Selection Guidelines:
1. For C functions, structs, and variables: Prefer codesearch-definition-source
or codesearch-struct-layout FIRST to retrieve clean, exact definitions
without line-number guessing.
2. If symbol lookup fails (e.g., preprocessor macros, macro-generated code, or
disabled #ifdef branches), fall back to read-file or grepper.
3. For file headers, #include directives, preprocessor macro definitions, and
non-C files (Kconfig, Makefiles, docs): Use read-file or grepper directly.
4. Be concise and targeted. Answer the question as directly and concisely as possible
once you have located the relevant code or definitions. If a symbol or function cannot
be found after targeted searches, conclude with the best available information rather
than continuing repetitive searches.
Do NOT use git-log to search for the presence or existence of files in the
repository. git-log is only for tracing commit history of files that are
already present in the current checkout. If a file does not exist in the
current checkout, it cannot be used for reproduction.
Avoid running broad git-log queries (such as searches on the entire repo)
without a specific 'PathPrefix' to restrict the scope, as these are very
expensive and will time out.
If a git-log tool call times out, do not retry the query with the same broad
scope. You must specify a tighter, narrower 'PathPrefix' for subsequent queries.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: If an unprivileged user creates a user namespace and mounts sysfs, can they write to a sysfs file that has 0644 permissions and is owned by global root?
|
| 27/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 4183
output: 92
thoughts: 402
Thoughts: **My Initial Thoughts on the User's Question**
Okay, so the user poses a tricky question. Essentially, they're asking about a potential security bypass: can an unprivileged user, playing within the confines of a user namespace, write to a sysfs file that *appears* to have permissive permissions (0644) and a global root ownership? Let's dissect this, because there are a few layers here, and they're all critical to understanding the potential vulnerability and the Linux kernel's protections.
First, the setup: we have an unprivileged user creating a user namespace. This immediately introduces a layer of isolation. They'll be mapped to root *within* that namespace, which, in a standard setup, is mapped to an unprivileged user id outside of the namespace. The core of the question is, can they circumvent the "real" root's access control?
My immediate questions are centered around `sysfs` itself. Can a user namespace even *mount* sysfs? Or does mounting sysfs require some privileged operation, even within a namespace? And then, if it *can* be mounted, how does sysfs behave with regard to file ownership and permissions within a user namespace? This gets into the core of how permissions are actually *checked* in sysfs.
I need to dive into the kernel source, specifically: `fs/sysfs`, `fs/kernfs`, `super.c` and `inode.c` within kernfs/sysfs. I want to understand: is `FS_USERNS_MOUNT` set for sysfs? That's a huge clue. How are ownership and permissions for sysfs inodes handled? How are DAC/inode permissions handled, kernfs permission checks?
The user is asking about writing to a file, which means I need to understand the write path, and the kernel's security checks along that path. I need to understand exactly how the effective user ID within the user namespace interacts with the global file ownership and permissions, because the 0644 permissions are the bait here. Is the system going to check permissions in the user namespace, and if so, how?
Let me do a quick search using `grepper` or `codesearch-definition-source` to investigate sysfs mounting, user namespaces, permissions and write paths. I need to figure out exactly how the kernel handles this situation!
|
| 28/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:sysfs_fs_type PathPrefix:fs/sysfs]
Results: map[Output:fs/sysfs/mount.c=70=static void sysfs_kill_sb(struct super_block *sb)
--
fs/sysfs/mount.c-77-
fs/sysfs/mount.c:78:static struct file_system_type sysfs_fs_type = {
fs/sysfs/mount.c-79- .name = "sysfs",
--
fs/sysfs/mount.c=85=int __init sysfs_init(void)
--
fs/sysfs/mount.c-95-
fs/sysfs/mount.c:96: err = register_filesystem(&sysfs_fs_type);
fs/sysfs/mount.c-97- if (err) {
]
|
| 29/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:FS_USERNS_MOUNT PathPrefix:fs/sysfs]
Results: map[Output:fs/sysfs/mount.c=78=static struct file_system_type sysfs_fs_type = {
--
fs/sysfs/mount.c-81- .kill_sb = sysfs_kill_sb,
fs/sysfs/mount.c:82: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED,
fs/sysfs/mount.c-83-};
]
|
| 30/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Error:
Args: map[Expression:FS_USERNS_MOUNT PathPrefix:fs/kernfs]
Results:
|
| 31/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 5500
output: 35
thoughts: 50
Thoughts: Here's my summary, as though I'm thinking through this myself:
**Delving into sysfs and User Namespaces**
Okay, so `sysfs_fs_type`... the filesystem type struct for sysfs. I see it has `.fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED`. That immediately catches my eye, given my expertise. Specifically, the `FS_USERNS_MOUNT` flag indicates it's designed to interact with user namespaces, which is usually interesting from a security and containerization standpoint. And the `FS_USERNS_MOUNT_RESTRICTED` flag means we should be careful. It implies that there might be some limitations, or that the mounting process is tightly controlled, when mounted within a user namespace, which is important.
Given that's my current understanding, let's stop guessing and go straight to the source. Time to dig into `fs/sysfs/mount.c`. I need to see *precisely* how sysfs handles mount requests within user namespaces, and the implications of these flags. I need to understand what's restricted, why it's restricted, and how it relates to general security considerations. Gotta make sure nothing unexpected is going on here.
|
| 32/4 |
2026/09/13 00:29 |
tool |
read-file |
0m
Args: map[File:fs/sysfs/mount.c FirstLine:1 LineCount:100]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0
2: /*
3: * fs/sysfs/symlink.c - operations for initializing and mounting sysfs
4: *
5: * Copyright (c) 2001-3 Patrick Mochel
6: * Copyright (c) 2007 SUSE Linux Products GmbH
7: * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
8: *
9: * Please see Documentation/filesystems/sysfs.rst for more information.
10: */
11:
12: #include <linux/fs.h>
13: #include <linux/magic.h>
14: #include <linux/mount.h>
15: #include <linux/init.h>
16: #include <linux/slab.h>
17: #include <linux/user_namespace.h>
18: #include <linux/fs_context.h>
19: #include <net/net_namespace.h>
20:
21: #include "sysfs.h"
22:
23: static struct kernfs_root *sysfs_root;
24: struct kernfs_node *sysfs_root_kn;
25:
26: static void sysfs_fs_context_free(struct fs_context *fc)
27: {
28: struct kernfs_fs_context *kfc = fc->fs_private;
29:
30: if (kfc->ns_tag)
31: kobj_ns_drop(KOBJ_NS_TYPE_NET, kfc->ns_tag);
32: kernfs_free_fs_context(fc);
33: kfree(kfc);
34: }
35:
36: static const struct fs_context_operations sysfs_fs_context_ops = {
37: .free = sysfs_fs_context_free,
38: .get_tree = kernfs_get_tree,
39: };
40:
41: static int sysfs_init_fs_context(struct fs_context *fc)
42: {
43: struct kernfs_fs_context *kfc;
44: struct ns_common *ns;
45:
46: if (!(fc->sb_flags & SB_KERNMOUNT)) {
47: if (!kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET))
48: return -EPERM;
49: }
50:
51: kfc = kzalloc_obj(struct kernfs_fs_context);
52: if (!kfc)
53: return -ENOMEM;
54:
55: kfc->ns_tag = ns = kobj_ns_grab_current(KOBJ_NS_TYPE_NET);
56: kfc->root = sysfs_root;
57: kfc->magic = SYSFS_MAGIC;
58: fc->fs_private = kfc;
59: fc->ops = &sysfs_fs_context_ops;
60: if (ns) {
61: struct net *netns = to_net_ns(ns);
62:
63: put_user_ns(fc->user_ns);
64: fc->user_ns = get_user_ns(netns->user_ns);
65: }
66: fc->global = true;
67: return 0;
68: }
69:
70: static void sysfs_kill_sb(struct super_block *sb)
71: {
72: struct ns_common *ns = (struct ns_common *)kernfs_super_ns(sb);
73:
74: kernfs_kill_sb(sb);
75: kobj_ns_drop(KOBJ_NS_TYPE_NET, ns);
76: }
77:
78: static struct file_system_type sysfs_fs_type = {
79: .name = "sysfs",
80: .init_fs_context = sysfs_init_fs_context,
81: .kill_sb = sysfs_kill_sb,
82: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED,
83: };
84:
85: int __init sysfs_init(void)
86: {
87: int err;
88:
89: sysfs_root = kernfs_create_root(NULL, KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK,
90: NULL);
91: if (IS_ERR(sysfs_root))
92: return PTR_ERR(sysfs_root);
93:
94: sysfs_root_kn = kernfs_root_to_node(sysfs_root);
95:
96: err = register_filesystem(&sysfs_fs_type);
97: if (err) {
98: kernfs_destroy_root(sysfs_root);
99: return err;
100: }
]
|
| 33/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 7316
output: 27
thoughts: 157
Thoughts: **Diving into the Sysfs Initialization**
Okay, so I'm looking at this sysfs initialization code, specifically lines 89-90. And there it is: `sysfs_root = kernfs_create_root(NULL, KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK, NULL);` That `KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK` flag immediately grabs my attention. I need to understand that. What's the deal with adding an *extra* permission check at the root? That sounds like a potential security hardening measure, or perhaps a niche access control requirement for a specific subsystem.
And wait, I see `kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET)` nearby. I need to understand that call too. What does `kobj_ns_current_may_mount` do exactly in this context? Is this about network namespace integration in sysfs? This is relevant.
Alright, back to the `KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK`. I'm going to fire up grep and get some context on this flag. I need to see where it's defined, how it's used, and what effect it has on the access permissions. Let's see what the source code reveals.
|
| 34/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK]
Results: map[Output:fs/kernfs/file.c=603=static int kernfs_fop_open(struct inode *inode, struct file *file)
--
fs/kernfs/file.c-621- /* see the flag definition for details */
fs/kernfs/file.c:622: if (root->flags & KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK) {
fs/kernfs/file.c-623- if ((file->f_mode & FMODE_WRITE) &&
--
fs/resctrl/rdtgroup.c=4284=static int rdtgroup_setup_root(struct rdt_fs_context *ctx)
--
fs/resctrl/rdtgroup.c-4287- KERNFS_ROOT_CREATE_DEACTIVATED |
fs/resctrl/rdtgroup.c:4288: KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK,
fs/resctrl/rdtgroup.c-4289- &rdtgroup_default);
--
fs/sysfs/mount.c=85=int __init sysfs_init(void)
--
fs/sysfs/mount.c-88-
fs/sysfs/mount.c:89: sysfs_root = kernfs_create_root(NULL, KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK,
fs/sysfs/mount.c-90- NULL);
--
include/linux/kernfs.h=124=enum kernfs_root_flag {
--
include/linux/kernfs.h-141- */
include/linux/kernfs.h:142: KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK = 0x0002,
include/linux/kernfs.h-143-
]
|
| 35/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 8242
output: 36
thoughts: 46
Thoughts: Here's my summary, as though I'm thinking through this process:
**Diving into Kernfs Implementation**
Okay, so I need to get a handle on how Kernfs is managing file operations, specifically the read/write aspects. My initial thought is to zero in on `include/linux/kernfs.h`, around lines 124-150. That header file should give me the core data structures and function declarations related to the file interface within Kernfs. I'm expecting to find the definitions for the `kernfs_ops` struct, the file operations structure, and probably some of the internal data types that define how these files behave. I'm assuming this section will outline the overall read/write interface contracts.
Then, to understand the actual implementation details, I'm going to look at the `fs/kernfs/file.c` source file. Specifically, I want to see what's happening around lines 603-640. That location *should* contain the implementation of the file operations I spotted in the header – perhaps the `kernfs_file_read` and `kernfs_file_write` functions, if that's how it's structured. I'm expecting to see the low-level details of how Kernfs files handle data transfer, permission checks, and any special Kernfs-specific logic involved. I'll be looking for things like buffer management, locking, and how it interacts with the underlying Kernfs data structures. Time to dig in and see if this intuition pans out!
|
| 36/4 |
2026/09/13 00:29 |
tool |
read-file |
0m
Args: map[File:include/linux/kernfs.h FirstLine:120 LineCount:40]
Results: map[Contents: 120: KERNFS_REMOVING = 0x4000,
121: };
122:
123: /* @flags for kernfs_create_root() */
124: enum kernfs_root_flag {
125: /*
126: * kernfs_nodes are created in the deactivated state and invisible.
127: * They require explicit kernfs_activate() to become visible. This
128: * can be used to make related nodes become visible atomically
129: * after all nodes are created successfully.
130: */
131: KERNFS_ROOT_CREATE_DEACTIVATED = 0x0001,
132:
133: /*
134: * For regular files, if the opener has CAP_DAC_OVERRIDE, open(2)
135: * succeeds regardless of the RW permissions. sysfs had an extra
136: * layer of enforcement where open(2) fails with -EACCES regardless
137: * of CAP_DAC_OVERRIDE if the permission doesn't have the
138: * respective read or write access at all (none of S_IRUGO or
139: * S_IWUGO) or the respective operation isn't implemented. The
140: * following flag enables that behavior.
141: */
142: KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK = 0x0002,
143:
144: /*
145: * The filesystem supports exportfs operation, so userspace can use
146: * fhandle to access nodes of the fs.
147: */
148: KERNFS_ROOT_SUPPORT_EXPORTOP = 0x0004,
149:
150: /*
151: * Support user xattrs to be written to nodes rooted at this root.
152: */
153: KERNFS_ROOT_SUPPORT_USER_XATTR = 0x0008,
154:
155: /*
156: * Renames must not change the parent node.
157: */
158: KERNFS_ROOT_INVARIANT_PARENT = 0x0010,
159: };
]
|
| 37/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 9301
output: 36
thoughts: 26
Thoughts: Here's a summary of my thought process, as requested:
**Diving into `kernfs` File Operations**
Okay, time to dig into the `kernfs` file handling. I'm going to focus my attention on `fs/kernfs/file.c`, specifically around lines 600-640. That region should contain the core logic for [insert specific operation being examined, e.g., read, write, getattr, etc., depending on the context the expert would know]. I need to refresh my memory on how `kernfs` interacts with the underlying VFS, especially since I'm trying to [insert specific goal of the investigation, e.g., identify a potential race condition, trace a specific data flow, understand the lifecycle of a particular attribute]. This chunk of code should hold the key, or at least provide some crucial clues, to understand the current situation.
|
| 38/4 |
2026/09/13 00:29 |
tool |
read-file |
0m
Args: map[File:fs/kernfs/file.c FirstLine:600 LineCount:50]
Results: map[Contents: 600: mutex_unlock(mutex);
601: }
602:
603: static int kernfs_fop_open(struct inode *inode, struct file *file)
604: {
605: struct kernfs_node *kn = inode->i_private;
606: struct kernfs_root *root = kernfs_root(kn);
607: const struct kernfs_ops *ops;
608: struct kernfs_open_file *of;
609: bool has_read, has_write, has_mmap;
610: int error = -EACCES;
611:
612: if (!kernfs_get_active(kn))
613: return -ENODEV;
614:
615: ops = kernfs_ops(kn);
616:
617: has_read = ops->seq_show || ops->read || ops->mmap;
618: has_write = ops->write || ops->mmap;
619: has_mmap = ops->mmap;
620:
621: /* see the flag definition for details */
622: if (root->flags & KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK) {
623: if ((file->f_mode & FMODE_WRITE) &&
624: (!(inode->i_mode & S_IWUGO) || !has_write))
625: goto err_out;
626:
627: if ((file->f_mode & FMODE_READ) &&
628: (!(inode->i_mode & S_IRUGO) || !has_read))
629: goto err_out;
630: }
631:
632: /* allocate a kernfs_open_file for the file */
633: error = -ENOMEM;
634: of = kzalloc_obj(struct kernfs_open_file);
635: if (!of)
636: goto err_out;
637:
638: /*
639: * The following is done to give a different lockdep key to
640: * @of->mutex for files which implement mmap. This is a rather
641: * crude way to avoid false positive lockdep warning around
642: * mm->mmap_lock - mmap nests @of->mutex under mm->mmap_lock and
643: * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under
644: * which mm->mmap_lock nests, while holding @of->mutex. As each
645: * open file has a separate mutex, it's okay as long as those don't
646: * happen on the same file. At this point, we can't easily give
647: * each file a separate locking class. Let's differentiate on
648: * whether the file has mmap or not for now.
649: *
]
|
| 39/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 10403
output: 25
thoughts: 371
Thoughts: **Analyzing `kernfs_fop_open` and Related Security Considerations**
Okay, let's break this down. That `kernfs_fop_open` code snippet immediately caught my eye. Specifically, I'm thinking about the permission checks, especially concerning `inode->i_mode`. I need to understand what this means in the context of a sysfs file, particularly one with typical 0644 permissions. That `S_IWUGO` check seems off; `S_IWUSR` (write for the owner, 0200) *is* included in `S_IWUGO` (write for user, group and others, 0222). That feels like an immediate red flag.
My immediate follow-up question is always: Who's opening the file? And what checks *precede* this `kernfs_fop_open` call? My experience tells me there are generic VFS permission checks in play first, things like `generic_permission()`, `inode_permission()`, and of course DAC permissions, which are all critical for overall security context.
Then I need to expand my view. I'm wondering what user namespace the superblock is in. And, what uid/gid does the inode actually have? This is huge. User namespaces can radically alter the perceived permissions, so I need to understand that fully.
And there's `FS_USERNS_MOUNT_RESTRICTED`. That's another variable I need to thoroughly understand in this permission equation. I need to know how that interacts with the overall picture, and also `kobj_ns_current_may_mount`.
Furthermore, I have to dig into the initialization of sysfs inodes and how `inode_permission` functions within this specific framework. I have to trace how permissions are actually set and inherited.
So, first things first, let's launch a kernel-wide search for `FS_USERNS_MOUNT_RESTRICTED` to establish all the places it's relevant. I need the full picture here.
|
| 40/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:FS_USERNS_MOUNT_RESTRICTED]
Results: map[Output:fs/namespace.c=1076=static void mnt_add_to_ns(struct mnt_namespace *ns, struct mount *mnt)
--
fs/namespace.c-1101-
fs/namespace.c:1102: if ((mnt->mnt.mnt_sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED) &&
fs/namespace.c-1103- mnt->mnt.mnt_root == mnt->mnt.mnt_sb->s_root)
--
fs/namespace.c=6426=static bool mount_too_revealing(const struct super_block *sb, int *new_mnt_flags)
--
fs/namespace.c-6435- /* Can this filesystem be too revealing? */
fs/namespace.c:6436: if (!(sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED))
fs/namespace.c-6437- return false;
--
fs/proc/root.c=369=static struct file_system_type proc_fs_type = {
--
fs/proc/root.c-373- .kill_sb = proc_kill_sb,
fs/proc/root.c:374: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED | FS_DISALLOW_NOTIFY_PERM,
fs/proc/root.c-375-};
--
fs/sysfs/mount.c=78=static struct file_system_type sysfs_fs_type = {
--
fs/sysfs/mount.c-81- .kill_sb = sysfs_kill_sb,
fs/sysfs/mount.c:82: .fs_flags = FS_USERNS_MOUNT | FS_USERNS_MOUNT_RESTRICTED,
fs/sysfs/mount.c-83-};
--
include/linux/fs.h=2286=struct file_system_type {
--
include/linux/fs.h-2297-#define FS_POWER_FREEZE 256 /* Always freeze on suspend/hibernate */
include/linux/fs.h:2298:#define FS_USERNS_MOUNT_RESTRICTED 512 /* Restrict mount in userns if not already visible */
include/linux/fs.h-2299-#define FS_USERNS_DELEGATABLE 1024 /* Can be mounted inside userns from outside */
--
kernel/acct.c=216=static int acct_on(const char __user *name)
--
kernel/acct.c-251- /* Exclude procfs and sysfs. */
kernel/acct.c:252: if (file_inode(file)->i_sb->s_type->fs_flags & FS_USERNS_MOUNT_RESTRICTED)
kernel/acct.c-253- return -EINVAL;
]
|
| 41/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 11984
output: 24
thoughts: 27
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Diving into `kobj_ns_current_may_mount`**
Okay, time to get my hands dirty. My initial thought is, "Right, let's take a look at `kobj_ns_current_may_mount`." Specifically, I need to understand its definition and, more importantly, *what it actually does*. It's likely involved in namespace checks related to mounting operations, given the function name. I'll need to trace its declaration – probably in the core kernel source somewhere related to object management or perhaps the VFS layer, depending on how they've structured things. My aim is to quickly grasp the logical flow and any potential side effects of this function. I'll be looking for where it's called, how its return value is used, and what context it operates within. This could be crucial for understanding some odd behavior I'm chasing down or simply for deepening my understanding of the kernel's security model. I'll start by grepping the source and then move on to reading the relevant code.
|
| 42/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:kobj_ns_current_may_mount]
Results: map[Output:fs/sysfs/mount.c=41=static int sysfs_init_fs_context(struct fs_context *fc)
--
fs/sysfs/mount.c-46- if (!(fc->sb_flags & SB_KERNMOUNT)) {
fs/sysfs/mount.c:47: if (!kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET))
fs/sysfs/mount.c-48- return -EPERM;
--
include/linux/kobject_ns.h=52=const struct kobj_ns_type_operations *kobj_ns_ops(const struct kobject *kobj);
include/linux/kobject_ns.h-53-
include/linux/kobject_ns.h:54:bool kobj_ns_current_may_mount(enum kobj_ns_type type);
include/linux/kobject_ns.h-55-struct ns_common *kobj_ns_grab_current(enum kobj_ns_type type);
--
lib/kobject.c=1069=const struct kobj_ns_type_operations *kobj_ns_ops(const struct kobject *kobj)
--
lib/kobject.c-1073-
lib/kobject.c:1074:bool kobj_ns_current_may_mount(enum kobj_ns_type type)
lib/kobject.c-1075-{
]
|
| 43/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 12636
output: 35
thoughts: 20
Thoughts: Here's my summary, as if I were thinking these thoughts:
**Diving into the `kobject` Code**
Okay, time to get my hands dirty. I need to understand what's happening with these `kobject` instances. I'm going to jump into the `lib/kobject.c` file – that's where the core `kobject` functionality should reside. Specifically, I'm aiming for around line 1074. I'm hoping that specific section contains the critical elements I need for this particular issue. Let's see what gems we can find there.
|
| 44/4 |
2026/09/13 00:29 |
tool |
read-file |
0m
Args: map[File:lib/kobject.c FirstLine:1070 LineCount:30]
Results: map[Contents:1070: {
1071: return kobj_child_ns_ops(kobj->parent);
1072: }
1073:
1074: bool kobj_ns_current_may_mount(enum kobj_ns_type type)
1075: {
1076: bool may_mount = true;
1077:
1078: spin_lock(&kobj_ns_type_lock);
1079: if (kobj_ns_type_is_valid(type) && kobj_ns_ops_tbl[type])
1080: may_mount = kobj_ns_ops_tbl[type]->current_may_mount();
1081: spin_unlock(&kobj_ns_type_lock);
1082:
1083: return may_mount;
1084: }
1085:
1086: struct ns_common *kobj_ns_grab_current(enum kobj_ns_type type)
1087: {
1088: struct ns_common *ns = NULL;
1089:
1090: spin_lock(&kobj_ns_type_lock);
1091: if (kobj_ns_type_is_valid(type) && kobj_ns_ops_tbl[type])
1092: ns = kobj_ns_ops_tbl[type]->grab_current_ns();
1093: spin_unlock(&kobj_ns_type_lock);
1094:
1095: return ns;
1096: }
1097: EXPORT_SYMBOL_GPL(kobj_ns_grab_current);
1098:
1099: void kobj_ns_drop(enum kobj_ns_type type, struct ns_common *ns)
]
|
| 45/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 13318
output: 22
thoughts: 32
Thoughts: Okay, let's dive into this. Here's how I'd approach this, thinking out loud, so to speak:
**Digging into Network Namespaces**
Alright, I need to figure out the origin of this `net_ns_type_operations` structure, or, more specifically, the registration for `KOBJ_NS_TYPE_NET`. Where is this thing defined? My first instinct is to trace back the code and figure out the module or subsystem that's responsible. I'm going to jump in and start looking for the definition. This is a pretty standard debugging practice, you know, finding the source. Let's start with where `KOBJ_NS_TYPE_NET` is used and see where it's registered. I'm assuming that it is used with the `net_ns_type_operations` that is probably the crucial data structure. Let's get to work!
|
| 46/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:KOBJ_NS_TYPE_NET]
Results: map[Output:drivers/infiniband/ulp/srp/ib_srp.c=1039=static void srp_remove_target(struct srp_target_port *target)
--
drivers/infiniband/ulp/srp/ib_srp.c-1051- srp_disconnect_target(target);
drivers/infiniband/ulp/srp/ib_srp.c:1052: kobj_ns_drop(KOBJ_NS_TYPE_NET, to_ns_common(target->net));
drivers/infiniband/ulp/srp/ib_srp.c-1053- for (i = 0; i < target->ch_count; i++) {
--
drivers/infiniband/ulp/srp/ib_srp.c=3701=static ssize_t add_target_store(struct device *dev,
--
drivers/infiniband/ulp/srp/ib_srp.c-3734-
drivers/infiniband/ulp/srp/ib_srp.c:3735: target->net = to_net_ns(kobj_ns_grab_current(KOBJ_NS_TYPE_NET));
drivers/infiniband/ulp/srp/ib_srp.c-3736- target->io_class = SRP_REV16A_IB_IO_CLASS;
--
drivers/infiniband/ulp/srp/ib_srp.c-3926- if (target->state != SRP_TARGET_REMOVED)
drivers/infiniband/ulp/srp/ib_srp.c:3927: kobj_ns_drop(KOBJ_NS_TYPE_NET, to_ns_common(target->net));
drivers/infiniband/ulp/srp/ib_srp.c-3928- scsi_host_put(target->scsi_host);
--
fs/sysfs/mount.c=26=static void sysfs_fs_context_free(struct fs_context *fc)
--
fs/sysfs/mount.c-30- if (kfc->ns_tag)
fs/sysfs/mount.c:31: kobj_ns_drop(KOBJ_NS_TYPE_NET, kfc->ns_tag);
fs/sysfs/mount.c-32- kernfs_free_fs_context(fc);
--
fs/sysfs/mount.c=41=static int sysfs_init_fs_context(struct fs_context *fc)
--
fs/sysfs/mount.c-46- if (!(fc->sb_flags & SB_KERNMOUNT)) {
fs/sysfs/mount.c:47: if (!kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET))
fs/sysfs/mount.c-48- return -EPERM;
--
fs/sysfs/mount.c-54-
fs/sysfs/mount.c:55: kfc->ns_tag = ns = kobj_ns_grab_current(KOBJ_NS_TYPE_NET);
fs/sysfs/mount.c-56- kfc->root = sysfs_root;
--
fs/sysfs/mount.c=70=static void sysfs_kill_sb(struct super_block *sb)
--
fs/sysfs/mount.c-74- kernfs_kill_sb(sb);
fs/sysfs/mount.c:75: kobj_ns_drop(KOBJ_NS_TYPE_NET, ns);
fs/sysfs/mount.c-76-}
--
include/linux/kobject_ns.h=27=enum kobj_ns_type {
include/linux/kobject_ns.h-28- KOBJ_NS_TYPE_NONE = 0,
include/linux/kobject_ns.h:29: KOBJ_NS_TYPE_NET,
include/linux/kobject_ns.h-30- KOBJ_NS_TYPES
--
lib/kobject_uevent.c=382=static int kobject_uevent_net_broadcast(struct kobject *kobj,
--
lib/kobject_uevent.c-405- if (ops && ops->netlink_ns && kobj->ktype->namespace)
lib/kobject_uevent.c:406: if (ops->type == KOBJ_NS_TYPE_NET)
lib/kobject_uevent.c-407- ns = kobj->ktype->namespace(kobj);
--
net/core/net-sysfs.c=2187=const struct kobj_ns_type_operations net_ns_type_operations = {
net/core/net-sysfs.c:2188: .type = KOBJ_NS_TYPE_NET,
net/core/net-sysfs.c-2189- .current_may_mount = net_current_may_mount,
]
|
| 47/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 14814
output: 21
thoughts: 26
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into net_current_may_mount**
Okay, so I'm thinking about the network subsystem, and I need to understand something specific. Let's start by digging into `net/core/net-sysfs.c`. My hunch is that `net_current_may_mount` is the key to whatever I'm investigating. I need to understand its role within the broader context of the network sysfs integration. Is it related to user namespace mounting permissions, or perhaps access control for creating or manipulating network interfaces in sysfs? Perhaps it dictates the criteria under which the net namespace is allowed to be mounted for operations? I want to see how it's used, how it's defined, and what conditions influence its return value. Time to fire up the editor and take a look at the source. Understanding this variable will likely unlock the answer to my original question about the internal workings of X subsystem.
|
| 48/4 |
2026/09/13 00:29 |
tool |
grepper |
0m
Args: map[Expression:net_current_may_mount]
Results: map[Output:net/core/net-sysfs.c=2139=static void remove_queue_kobjects(struct net_device *dev)
--
net/core/net-sysfs.c-2159-
net/core/net-sysfs.c:2160:static bool net_current_may_mount(void)
net/core/net-sysfs.c-2161-{
--
net/core/net-sysfs.c=2187=const struct kobj_ns_type_operations net_ns_type_operations = {
net/core/net-sysfs.c-2188- .type = KOBJ_NS_TYPE_NET,
net/core/net-sysfs.c:2189: .current_may_mount = net_current_may_mount,
net/core/net-sysfs.c-2190- .grab_current_ns = net_grab_current_ns,
]
|
| 49/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 15315
output: 39
thoughts: 28
Thoughts: Here's my summary, as if I were thinking these thoughts:
**Analyzing net/core/net-sysfs.c: A Deep Dive into Netlink Attributes**
Okay, time to get my hands dirty. Let's dig into `net/core/net-sysfs.c`, specifically lines 2155-2175. I'm guessing this section likely deals with the sysfs interfaces related to network configuration, probably focusing on attribute handling, given the file name and location. My gut says we'll see some structure definitions or function calls related to how network parameters are exposed and managed through the kernel's sysfs. I’m hoping to find details on how Netlink attributes are mapped or synchronized with the sysfs representation of network devices. Perhaps this section is involved in translating between internal kernel data structures and the user-space view. Let’s see if it's handling attribute reads, writes, or some form of validation. I'm especially interested in looking for any potential race conditions or locking mechanisms used, as concurrent access to network settings can get tricky. Alright, let’s get to reading and see what treasures this section holds.
|
| 50/4 |
2026/09/13 00:29 |
tool |
read-file |
0m
Args: map[File:net/core/net-sysfs.c FirstLine:2155 LineCount:25]
Results: map[Contents:2155: #ifdef CONFIG_SYSFS
2156: kset_unregister(dev->queues_kset);
2157: #endif
2158: }
2159:
2160: static bool net_current_may_mount(void)
2161: {
2162: struct net *net = current->nsproxy->net_ns;
2163:
2164: return ns_capable(net->user_ns, CAP_SYS_ADMIN);
2165: }
2166:
2167: static struct ns_common *net_grab_current_ns(void)
2168: {
2169: struct net *net = current->nsproxy->net_ns;
2170: #ifdef CONFIG_NET_NS
2171: if (net)
2172: refcount_inc(&net->passive);
2173: #endif
2174: return net ? to_ns_common(net) : NULL;
2175: }
2176:
2177: static const struct ns_common *net_initial_ns(void)
2178: {
2179: return to_ns_common(&init_net);
]
|
| 51/4 |
2026/09/13 00:29 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 15979
output: 25
thoughts: 628
Thoughts: **Analyzing Sysfs Mounting and Permissions**
Okay, let's break this down. I'm looking at `sysfs_init_fs_context` and immediately the check for `SB_KERNMOUNT` catches my eye. It's a kernel mount, and if not, we hit `kobj_ns_current_may_mount`. That calls `ns_capable` on the *current* network namespace's user namespace. Right, so if I *don't* have privileges, I need a valid network namespace to mount sysfs.
I'm following the logic. What happens if I create a user namespace but *not* a new network namespace? My `current->nsproxy->net_ns` will point to the host's `init_net`. And `init_net` is owned by `init_user_ns`. So the code calls `ns_capable(init_net.user_ns, CAP_SYS_ADMIN)`. Which means, an unprivileged user cannot mount sysfs without a new network namespace.
But that's not quite my question. My question is, "If an unprivileged user *does* mount sysfs (somehow), can they write to a 0644 file owned by root?" I need to assume that `sysfs` is mounted. The important thing is whether they *can* write, not whether they can mount.
So, let's think: I'm assuming the mount is successful. Now it’s about permissions and ownership. What are the rules? I need to understand *how* inodes and permissions are handled within `sysfs` and `kernfs`. I need to figure out how to find out who owns the files and their permissions.
Time to dive into the `kernfs` code and search for inode permission handling and related uid/gid logic. That's the key. I need to understand how the system *actually* enforces these permissions when writing to a sysfs file.
|
| 52/4 |
2026/09/13 00:30 |
tool |
grepper |
0m
Args: map[Expression:inode_permission PathPrefix:fs/]
Results: map[Output:fs/attr.c=372=int may_setattr(struct mnt_idmap *idmap, struct inode *inode,
--
fs/attr.c-390- if (!inode_owner_or_capable(idmap, inode)) {
fs/attr.c:391: error = inode_permission(idmap, inode, MAY_WRITE);
fs/attr.c-392- if (error)
--
fs/bad_inode.c=86=static int bad_inode_readlink(struct dentry *dentry, char __user *buffer,
--
fs/bad_inode.c-91-
fs/bad_inode.c:92:static int bad_inode_permission(struct mnt_idmap *idmap,
fs/bad_inode.c-93- struct inode *inode, int mask)
--
fs/bad_inode.c=163=static const struct inode_operations bad_inode_ops =
--
fs/bad_inode.c-174- .readlink = bad_inode_readlink,
fs/bad_inode.c:175: .permission = bad_inode_permission,
fs/bad_inode.c-176- .getattr = bad_inode_getattr,
--
fs/bpf_fs_kfuncs.c=103=static int bpf_xattr_read_permission(const char *name, struct inode *inode)
--
fs/bpf_fs_kfuncs.c-112-
fs/bpf_fs_kfuncs.c:113: return inode_permission(&nop_mnt_idmap, inode, MAY_READ);
fs/bpf_fs_kfuncs.c-114-}
--
fs/bpf_fs_kfuncs.c=173=static int bpf_xattr_write_permission(const char *name, struct inode *inode)
--
fs/bpf_fs_kfuncs.c-181-
fs/bpf_fs_kfuncs.c:182: return inode_permission(&nop_mnt_idmap, inode, MAY_WRITE);
fs/bpf_fs_kfuncs.c-183-}
--
fs/btrfs/ioctl.c=1739=static int btrfs_search_path_in_tree_user(struct mnt_idmap *idmap,
--
fs/btrfs/ioctl.c-1818- /* Check the read+exec permission of this directory. */
fs/btrfs/ioctl.c:1819: ret = inode_permission(idmap, &temp_inode->vfs_inode,
fs/btrfs/ioctl.c-1820- MAY_READ | MAY_EXEC);
--
fs/btrfs/ioctl.c=1877=static noinline int btrfs_ioctl_ino_lookup(struct btrfs_root *root,
--
fs/btrfs/ioctl.c-1919- *
fs/btrfs/ioctl.c:1920: * 1. Read + Exec permission will be checked using inode_permission() during
fs/btrfs/ioctl.c-1921- * path construction. -EACCES will be returned in case of failure.
--
fs/btrfs/ioctl.c=2218=static noinline int btrfs_ioctl_snap_destroy(struct file *file,
--
fs/btrfs/ioctl.c-2398-
fs/btrfs/ioctl.c:2399: ret = inode_permission(idmap, inode, MAY_WRITE | MAY_EXEC);
fs/btrfs/ioctl.c-2400- if (ret)
--
fs/btrfs/ioctl.c=2432=static int btrfs_ioctl_defrag(struct file *file, void __user *argp)
--
fs/btrfs/ioctl.c-2462- if (!capable(CAP_SYS_ADMIN) &&
fs/btrfs/ioctl.c:2463: inode_permission(&nop_mnt_idmap, inode, MAY_WRITE)) {
fs/btrfs/ioctl.c-2464- ret = -EPERM;
--
fs/configfs/symlink.c=135=int configfs_symlink(struct mnt_idmap *idmap, struct inode *dir,
--
fs/configfs/symlink.c-192- else
fs/configfs/symlink.c:193: ret = inode_permission(&nop_mnt_idmap, dir,
fs/configfs/symlink.c-194- MAY_WRITE | MAY_EXEC);
--
fs/ecryptfs/inode.c=852=ecryptfs_permission(struct mnt_idmap *idmap, struct inode *inode,
--
fs/ecryptfs/inode.c-854-{
fs/ecryptfs/inode.c:855: return inode_permission(&nop_mnt_idmap,
fs/ecryptfs/inode.c-856- ecryptfs_inode_to_lower(inode), mask);
--
fs/exec.c=1336=void would_dump(struct linux_binprm *bprm, struct file *file)
--
fs/exec.c-1339- struct mnt_idmap *idmap = file_mnt_idmap(file);
fs/exec.c:1340: if (inode_permission(idmap, inode, MAY_READ) < 0) {
fs/exec.c-1341- struct user_namespace *old, *user_ns;
--
fs/exec.c=1620=static void bprm_fill_uid(struct linux_binprm *bprm, struct file *file)
--
fs/exec.c-1648- vfsgid = i_gid_into_vfsgid(idmap, inode);
fs/exec.c:1649: err = inode_permission(idmap, inode, MAY_EXEC);
fs/exec.c-1650- inode_unlock(inode);
--
fs/namei.c=565=EXPORT_SYMBOL(generic_permission);
--
fs/namei.c-567-/**
fs/namei.c:568: * do_inode_permission - UNIX permission checking
fs/namei.c-569- * @idmap: idmap of the mount the inode was found from
--
fs/namei.c-577- */
fs/namei.c:578:static inline int do_inode_permission(struct mnt_idmap *idmap,
fs/namei.c-579- struct inode *inode, int mask)
--
fs/namei.c-600- *
fs/namei.c:601: * Note: lookup_inode_permission_may_exec() does not call here. If you add
fs/namei.c-602- * MAY_EXEC checks, adjust it.
--
fs/namei.c=604=static int sb_permission(struct super_block *sb, struct inode *inode, int mask)
--
fs/namei.c-616-/**
fs/namei.c:617: * inode_permission - Check for access rights to a given inode
fs/namei.c-618- * @idmap: idmap of the mount the inode was found from
--
fs/namei.c-627- */
fs/namei.c:628:int inode_permission(struct mnt_idmap *idmap,
fs/namei.c-629- struct inode *inode, int mask)
--
fs/namei.c-652-
fs/namei.c:653: retval = do_inode_permission(idmap, inode, mask);
fs/namei.c-654- if (unlikely(retval))
--
fs/namei.c-656-
fs/namei.c:657: retval = devcgroup_inode_permission(inode, mask);
fs/namei.c-658- if (unlikely(retval))
--
fs/namei.c-660-
fs/namei.c:661: return security_inode_permission(inode, mask);
fs/namei.c-662-}
fs/namei.c:663:EXPORT_SYMBOL(inode_permission);
fs/namei.c-664-
fs/namei.c-665-/*
fs/namei.c:666: * lookup_inode_permission_may_exec - Check traversal right for given inode
fs/namei.c-667- *
fs/namei.c-668- * This is a special case routine for may_lookup() making assumptions specific
fs/namei.c:669: * to path traversal. Use inode_permission() if you are doing something else.
fs/namei.c-670- *
fs/namei.c:671: * Work is shaved off compared to inode_permission() as follows:
fs/namei.c-672- * - we know for a fact there is no MAY_WRITE to worry about
--
fs/namei.c-682- */
fs/namei.c:683:static __always_inline int lookup_inode_permission_may_exec(struct mnt_idmap *idmap,
fs/namei.c-684- struct inode *inode, int mask)
--
fs/namei.c-692- if (unlikely(!(inode->i_opflags & (IOP_FASTPERM | IOP_FASTPERM_MAY_EXEC))))
fs/namei.c:693: return inode_permission(idmap, inode, mask);
fs/namei.c-694-
fs/namei.c-695- if (unlikely(((inode->i_mode & 0111) != 0111) || !no_acl_inode(inode)))
fs/namei.c:696: return inode_permission(idmap, inode, mask);
fs/namei.c-697-
fs/namei.c:698: return security_inode_permission(inode, mask);
fs/namei.c-699-}
--
fs/namei.c=1317=static bool safe_hardlink_source(struct mnt_idmap *idmap,
--
fs/namei.c-1334- /* Hardlinking to unreadable or unwritable sources is dangerous. */
fs/namei.c:1335: if (inode_permission(idmap, inode, MAY_READ | MAY_WRITE))
fs/namei.c-1336- return false;
--
fs/namei.c=1955=static inline int may_lookup(struct mnt_idmap *idmap,
--
fs/namei.c-1960- mask = nd->flags & LOOKUP_RCU ? MAY_NOT_BLOCK : 0;
fs/namei.c:1961: err = lookup_inode_permission_may_exec(idmap, nd->inode, mask);
fs/namei.c-1962- if (likely(!err))
--
fs/namei.c-1975-
fs/namei.c:1976: return lookup_inode_permission_may_exec(idmap, nd->inode, 0);
fs/namei.c-1977-}
--
fs/namei.c=3114=static int lookup_one_common(struct mnt_idmap *idmap,
--
fs/namei.c-3120- return err;
fs/namei.c:3121: return inode_permission(idmap, base->d_inode, MAY_EXEC);
fs/namei.c-3122-}
--
fs/namei.c=3678=int may_delete_dentry(struct mnt_idmap *idmap, struct inode *dir,
--
fs/namei.c-3696-
fs/namei.c:3697: error = inode_permission(idmap, dir, MAY_WRITE | MAY_EXEC);
fs/namei.c-3698- if (error)
--
fs/namei.c=3731=int may_create_dentry(struct mnt_idmap *idmap,
--
fs/namei.c-3741-
fs/namei.c:3742: return inode_permission(idmap, dir, MAY_WRITE | MAY_EXEC);
fs/namei.c-3743-}
--
fs/namei.c=4231=static int may_open(struct mnt_idmap *idmap, const struct path *path,
--
fs/namei.c-4268-
fs/namei.c:4269: error = inode_permission(idmap, inode, MAY_OPEN | acc_mode);
fs/namei.c-4270- if (error)
--
fs/namei.c=4315=static int may_o_create(struct mnt_idmap *idmap,
--
fs/namei.c-4325-
fs/namei.c:4326: error = inode_permission(idmap, dir->dentry->d_inode,
fs/namei.c-4327- MAY_WRITE | MAY_EXEC);
--
fs/namei.c=4866=int vfs_tmpfile(struct mnt_idmap *idmap,
--
fs/namei.c-4880- /* we want directory to be writable */
fs/namei.c:4881: error = inode_permission(idmap, dir, MAY_WRITE | MAY_EXEC);
fs/namei.c-4882- if (error)
--
fs/namei.c=6075=int vfs_rename(struct renamedata *rd)
--
fs/namei.c-6122- if (is_dir) {
fs/namei.c:6123: error = inode_permission(rd->mnt_idmap, source,
fs/namei.c-6124- MAY_WRITE);
--
fs/namei.c-6128- if ((flags & RENAME_EXCHANGE) && new_is_dir) {
fs/namei.c:6129: error = inode_permission(rd->mnt_idmap, target,
fs/namei.c-6130- MAY_WRITE);
--
fs/nfsd/nfsfh.c=29=static int nfsd_acceptable(void *expv, struct dentry *dentry)
--
fs/nfsd/nfsfh.c-43- parent = dget_parent(tdentry);
fs/nfsd/nfsfh.c:44: err = inode_permission(&nop_mnt_idmap,
fs/nfsd/nfsfh.c-45- d_inode(parent), MAY_EXEC);
--
fs/nfsd/vfs.c=2832=nfsd_permission(struct svc_cred *cred, struct svc_export *exp,
--
fs/nfsd/vfs.c-2891- /* This assumes NFSD_MAY_{READ,WRITE,EXEC} == MAY_{READ,WRITE,EXEC} */
fs/nfsd/vfs.c:2892: err = inode_permission(&nop_mnt_idmap, inode,
fs/nfsd/vfs.c-2893- acc & (MAY_READ | MAY_WRITE | MAY_EXEC));
--
fs/nfsd/vfs.c-2898- (acc & (NFSD_MAY_OWNER_OVERRIDE | NFSD_MAY_READ_IF_EXEC))))
fs/nfsd/vfs.c:2899: err = inode_permission(&nop_mnt_idmap, inode, MAY_EXEC);
fs/nfsd/vfs.c-2900-
--
fs/ocfs2/file.c=1352=int ocfs2_permission(struct mnt_idmap *idmap, struct inode *inode,
--
fs/ocfs2/file.c-1369- * may_open()
fs/ocfs2/file.c:1370: * inode_permission()
fs/ocfs2/file.c-1371- * ocfs2_permission()
--
fs/ocfs2/refcounttree.c=4331=static inline int ocfs2_may_create(struct inode *dir, struct dentry *child)
--
fs/ocfs2/refcounttree.c-4336- return -ENOENT;
fs/ocfs2/refcounttree.c:4337: return inode_permission(&nop_mnt_idmap, dir, MAY_WRITE | MAY_EXEC);
fs/ocfs2/refcounttree.c-4338-}
--
fs/ocfs2/refcounttree.c=4348=static int ocfs2_vfs_reflink(struct dentry *old_dentry, struct inode *dir,
--
fs/ocfs2/refcounttree.c-4390- if (!preserve) {
fs/ocfs2/refcounttree.c:4391: error = inode_permission(&nop_mnt_idmap, inode, MAY_READ);
fs/ocfs2/refcounttree.c-4392- if (error)
--
fs/open.c=73=int vfs_truncate(const struct path *path, loff_t length)
--
fs/open.c-87- idmap = mnt_idmap(path->mnt);
fs/open.c:88: error = inode_permission(idmap, inode, MAY_WRITE);
fs/open.c-89- if (error)
--
fs/open.c=463=static int do_faccessat(int dfd, const char __user *filename, int mode, int flags)
--
fs/open.c-503-
fs/open.c:504: res = inode_permission(mnt_idmap(path.mnt), inode, mode | MAY_ACCESS);
fs/open.c-505- /* SuS v2 requires we report a read only fs too */
--
fs/overlayfs/file.c=28=static struct file *ovl_open_realfile(const struct file *file,
--
fs/overlayfs/file.c-43- real_idmap = mnt_idmap(realpath->mnt);
fs/overlayfs/file.c:44: err = inode_permission(real_idmap, realinode, MAY_OPEN | acc_mode);
fs/overlayfs/file.c-45- if (err) {
--
fs/overlayfs/inode.c=306=int ovl_permission(struct mnt_idmap *idmap,
--
fs/overlayfs/inode.c-336- with_ovl_creds(inode->i_sb)
fs/overlayfs/inode.c:337: return inode_permission(mnt_idmap(realpath.mnt), realinode, mask);
fs/overlayfs/inode.c-338-}
--
fs/overlayfs/util.c=657=struct file *ovl_path_open(const struct path *path, int flags)
--
fs/overlayfs/util.c-676-
fs/overlayfs/util.c:677: err = inode_permission(real_idmap, inode, acc_mode | MAY_OPEN);
fs/overlayfs/util.c-678- if (err)
--
fs/remap_range.c=416=static bool may_dedupe_file(struct file *file)
--
fs/remap_range.c-426- return true;
fs/remap_range.c:427: if (!inode_permission(idmap, inode, MAY_WRITE))
fs/remap_range.c-428- return true;
--
fs/smb/server/smb2pdu.c=3197=int smb2_open(struct ksmbd_work *work)
--
fs/smb/server/smb2pdu.c-3667- } else if (!already_permitted) {
fs/smb/server/smb2pdu.c:3668: /* FILE_READ_ATTRIBUTE is allowed without inode_permission,
fs/smb/server/smb2pdu.c-3669- * because execute(search) permission on a parent directory,
--
fs/smb/server/smb2pdu.c-3672- if (daccess & ~(FILE_READ_ATTRIBUTES_LE | FILE_READ_CONTROL_LE)) {
fs/smb/server/smb2pdu.c:3673: rc = inode_permission(idmap,
fs/smb/server/smb2pdu.c-3674- d_inode(path.dentry),
--
fs/smb/server/smb2pdu.c-3680- (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE)) {
fs/smb/server/smb2pdu.c:3681: rc = inode_permission(idmap,
fs/smb/server/smb2pdu.c-3682- d_inode(path.dentry->d_parent),
--
fs/smb/server/smb2pdu.c=4802=int smb2_query_dir(struct ksmbd_work *work)
--
fs/smb/server/smb2pdu.c-4855- if (!(dir_fp->daccess & FILE_LIST_DIRECTORY_LE) ||
fs/smb/server/smb2pdu.c:4856: inode_permission(file_mnt_idmap(dir_fp->filp),
fs/smb/server/smb2pdu.c-4857- file_inode(dir_fp->filp),
--
fs/smb/server/vfs.c=118=void ksmbd_vfs_query_maximal_access(struct mnt_idmap *idmap,
--
fs/smb/server/vfs.c-122-
fs/smb/server/vfs.c:123: if (!inode_permission(idmap, d_inode(dentry), MAY_OPEN | MAY_WRITE))
fs/smb/server/vfs.c-124- *daccess |= cpu_to_le32(WRITE_DAC | WRITE_OWNER | SYNCHRONIZE |
--
fs/smb/server/vfs.c-128-
fs/smb/server/vfs.c:129: if (!inode_permission(idmap, d_inode(dentry), MAY_OPEN | MAY_READ))
fs/smb/server/vfs.c-130- *daccess |= FILE_READ_DATA_LE | FILE_READ_EA_LE;
fs/smb/server/vfs.c-131-
fs/smb/server/vfs.c:132: if (!inode_permission(idmap, d_inode(dentry), MAY_OPEN | MAY_EXEC))
fs/smb/server/vfs.c-133- *daccess |= FILE_EXECUTE_LE;
fs/smb/server/vfs.c-134-
fs/smb/server/vfs.c:135: if (!inode_permission(idmap, d_inode(dentry->d_parent), MAY_EXEC | MAY_WRITE))
fs/smb/server/vfs.c-136- *daccess |= FILE_DELETE_LE;
--
fs/xattr.c=126=xattr_permission(struct mnt_idmap *idmap, struct inode *inode,
--
fs/xattr.c-177-
fs/xattr.c:178: return inode_permission(idmap, inode, mask);
fs/xattr.c-179-}
]
|
| 53/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 23135
output: 28
thoughts: 35
Thoughts: **Kernfs and its Inode Operations**
Okay, let's break this down. My immediate task is to understand the relationship between `kernfs` and `inode_operations`. Specifically, I need to figure out which specific `inode_operations` are employed within the `kernfs` file system. To do this systematically, I'll start by searching the `fs/kernfs/` directory within the kernel source code. That's the most logical place to begin looking for how kernfs handles its inodes. Let's see what the source code reveals. I know this is a key area for managing file system behavior, so a focused search is definitely the right approach here.
|
| 54/4 |
2026/09/13 00:30 |
tool |
grepper |
0m
Args: map[Expression:struct inode_operations PathPrefix:fs/kernfs]
Results: map[Output:fs/kernfs/dir.c=1329=static int kernfs_iop_rename(struct mnt_idmap *idmap,
--
fs/kernfs/dir.c-1359-
fs/kernfs/dir.c:1360:const struct inode_operations kernfs_dir_iops = {
fs/kernfs/dir.c-1361- .lookup = kernfs_iop_lookup,
--
fs/kernfs/inode.c-19-
fs/kernfs/inode.c:20:static const struct inode_operations kernfs_iops = {
fs/kernfs/inode.c-21- .permission = kernfs_iop_permission,
--
fs/kernfs/kernfs-internal.h=188=extern const struct file_operations kernfs_dir_fops;
fs/kernfs/kernfs-internal.h:189:extern const struct inode_operations kernfs_dir_iops;
fs/kernfs/kernfs-internal.h-190-
--
fs/kernfs/kernfs-internal.h=205=void kernfs_drain_open_files(struct kernfs_node *kn);
--
fs/kernfs/kernfs-internal.h-209- */
fs/kernfs/kernfs-internal.h:210:extern const struct inode_operations kernfs_symlink_iops;
fs/kernfs/kernfs-internal.h-211-
--
fs/kernfs/symlink.c=128=static const char *kernfs_iop_get_link(struct dentry *dentry,
--
fs/kernfs/symlink.c-148-
fs/kernfs/symlink.c:149:const struct inode_operations kernfs_symlink_iops = {
fs/kernfs/symlink.c-150- .listxattr = kernfs_iop_listxattr,
]
|
| 55/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 23827
output: 34
thoughts: 55
Thoughts: **Diving into the Kernfs Inode Operations**
Okay, so I'm looking into the kernfs implementation and my focus is on how it handles inode operations. Specifically, I'm checking out `fs/kernfs/inode.c`. The first thing that catches my eye is this static structure, `kernfs_iops`. It looks like it's a `struct inode_operations`, and that it defines the core set of functions that govern inode behavior within kernfs. I see it defines the functions kernfs uses to access different inode functions. Let me have a deeper read. I'm especially interested in things like permission checking. Let me read the rest of the file and get a feel for how they've structured everything.
|
| 56/4 |
2026/09/13 00:30 |
tool |
read-file |
0m
Args: map[File:fs/kernfs/inode.c FirstLine:1 LineCount:90]
Results: map[Contents: 1: // SPDX-License-Identifier: GPL-2.0-only
2: /*
3: * fs/kernfs/inode.c - kernfs inode implementation
4: *
5: * Copyright (c) 2001-3 Patrick Mochel
6: * Copyright (c) 2007 SUSE Linux Products GmbH
7: * Copyright (c) 2007, 2013 Tejun Heo <tj@kernel.org>
8: */
9:
10: #include <linux/pagemap.h>
11: #include <linux/backing-dev.h>
12: #include <linux/capability.h>
13: #include <linux/errno.h>
14: #include <linux/slab.h>
15: #include <linux/xattr.h>
16: #include <linux/security.h>
17:
18: #include "kernfs-internal.h"
19:
20: static const struct inode_operations kernfs_iops = {
21: .permission = kernfs_iop_permission,
22: .setattr = kernfs_iop_setattr,
23: .getattr = kernfs_iop_getattr,
24: .listxattr = kernfs_iop_listxattr,
25: };
26:
27: static struct kernfs_iattrs *__kernfs_iattrs(struct kernfs_node *kn, bool alloc)
28: {
29: struct kernfs_iattrs *ret __free(kfree) = NULL;
30: struct kernfs_iattrs *attr;
31:
32: attr = READ_ONCE(kn->iattr);
33: if (attr || !alloc)
34: return attr;
35:
36: ret = kmem_cache_zalloc(kernfs_iattrs_cache, GFP_KERNEL);
37: if (!ret)
38: return NULL;
39:
40: INIT_LIST_HEAD_RCU(&ret->xattrs);
41: /* assign default attributes */
42: ret->ia_uid = GLOBAL_ROOT_UID;
43: ret->ia_gid = GLOBAL_ROOT_GID;
44:
45: ktime_get_real_ts64(&ret->ia_atime);
46: ret->ia_mtime = ret->ia_atime;
47: ret->ia_ctime = ret->ia_atime;
48:
49: simple_xattr_limits_init(&ret->xattr_limits);
50:
51: /* If someone raced us, recognize it. */
52: if (!try_cmpxchg(&kn->iattr, &attr, ret))
53: return READ_ONCE(kn->iattr);
54:
55: return no_free_ptr(ret);
56: }
57:
58: static struct kernfs_iattrs *kernfs_iattrs(struct kernfs_node *kn)
59: {
60: return __kernfs_iattrs(kn, true);
61: }
62:
63: static struct kernfs_iattrs *kernfs_iattrs_noalloc(struct kernfs_node *kn)
64: {
65: return __kernfs_iattrs(kn, false);
66: }
67:
68: int __kernfs_setattr(struct kernfs_node *kn, const struct iattr *iattr)
69: {
70: struct kernfs_iattrs *attrs;
71: unsigned int ia_valid = iattr->ia_valid;
72:
73: attrs = kernfs_iattrs(kn);
74: if (!attrs)
75: return -ENOMEM;
76:
77: if (ia_valid & ATTR_UID)
78: attrs->ia_uid = iattr->ia_uid;
79: if (ia_valid & ATTR_GID)
80: attrs->ia_gid = iattr->ia_gid;
81: if (ia_valid & ATTR_ATIME)
82: attrs->ia_atime = iattr->ia_atime;
83: if (ia_valid & ATTR_MTIME)
84: attrs->ia_mtime = iattr->ia_mtime;
85: if (ia_valid & ATTR_CTIME)
86: attrs->ia_ctime = iattr->ia_ctime;
87: if (ia_valid & ATTR_MODE)
88: kn->mode = iattr->ia_mode;
89: return 0;
90: }
]
|
| 57/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 25399
output: 36
thoughts: 17
Thoughts: Okay, let's dive into the rest of `fs/kernfs/inode.c`. I need to get a better handle on how kernfs inodes function, specifically how they're managed and how they interact with the rest of the file system. My goal is to grasp the core concepts so I can confidently contribute to, or debug, kernfs-related code in the future. I'm looking for the key data structures, the crucial functions, and any particularly clever or unusual implementation details. I'll be paying close attention to things like inode allocation, deallocation, and the handling of various kernfs node types. I'm anticipating that I'll need to focus on how attributes are managed and how the underlying VFS calls are handled by kernfs. I expect to be able to identify any potential performance bottlenecks or subtle race conditions. It will be very useful to see how the inode is integrated into the kernfs hierarchy and how it interacts with the underlying kernel object.
|
| 58/4 |
2026/09/13 00:30 |
tool |
read-file |
0m
Args: map[File:fs/kernfs/inode.c FirstLine:91 LineCount:100]
Results: map[Contents: 91:
92: /**
93: * kernfs_setattr - set iattr on a node
94: * @kn: target node
95: * @iattr: iattr to set
96: *
97: * Return: %0 on success, -errno on failure.
98: */
99: int kernfs_setattr(struct kernfs_node *kn, const struct iattr *iattr)
100: {
101: int ret;
102: struct kernfs_root *root = kernfs_root(kn);
103:
104: down_write(&root->kernfs_iattr_rwsem);
105: ret = __kernfs_setattr(kn, iattr);
106: up_write(&root->kernfs_iattr_rwsem);
107: return ret;
108: }
109:
110: int kernfs_iop_setattr(struct mnt_idmap *idmap, struct dentry *dentry,
111: struct iattr *iattr)
112: {
113: struct inode *inode = d_inode(dentry);
114: struct kernfs_node *kn = inode->i_private;
115: struct kernfs_root *root;
116: int error;
117:
118: if (!kn)
119: return -EINVAL;
120:
121: root = kernfs_root(kn);
122: down_write(&root->kernfs_iattr_rwsem);
123: error = setattr_prepare(&nop_mnt_idmap, dentry, iattr);
124: if (error)
125: goto out;
126:
127: error = __kernfs_setattr(kn, iattr);
128: if (error)
129: goto out;
130:
131: /* this ignores size changes */
132: setattr_copy(&nop_mnt_idmap, inode, iattr);
133:
134: out:
135: up_write(&root->kernfs_iattr_rwsem);
136: return error;
137: }
138:
139: ssize_t kernfs_iop_listxattr(struct dentry *dentry, char *buf, size_t size)
140: {
141: struct kernfs_node *kn = kernfs_dentry_node(dentry);
142: struct kernfs_iattrs *attrs;
143:
144: attrs = kernfs_iattrs(kn);
145: if (!attrs)
146: return -ENOMEM;
147:
148: return simple_xattr_list(d_inode(dentry), &attrs->xattrs, buf, size);
149: }
150:
151: static inline void set_default_inode_attr(struct inode *inode, umode_t mode)
152: {
153: inode->i_mode = mode;
154: simple_inode_init_ts(inode);
155: }
156:
157: static inline void set_inode_attr(struct inode *inode,
158: struct kernfs_iattrs *attrs)
159: {
160: inode->i_uid = attrs->ia_uid;
161: inode->i_gid = attrs->ia_gid;
162: inode_set_atime_to_ts(inode, attrs->ia_atime);
163: inode_set_mtime_to_ts(inode, attrs->ia_mtime);
164: inode_set_ctime_to_ts(inode, attrs->ia_ctime);
165: }
166:
167: static void kernfs_refresh_inode(struct kernfs_node *kn, struct inode *inode)
168: {
169: struct kernfs_iattrs *attrs;
170:
171: inode->i_mode = kn->mode;
172: attrs = kernfs_iattrs_noalloc(kn);
173: if (attrs)
174: /*
175: * kernfs_node has non-default attributes get them from
176: * persistent copy in kernfs_node.
177: */
178: set_inode_attr(inode, attrs);
179:
180: if (kernfs_type(kn) == KERNFS_DIR && !(kn->flags & KERNFS_REMOVING))
181: set_nlink(inode, kn->dir.subdirs + 2);
182: }
183:
184: int kernfs_iop_getattr(struct mnt_idmap *idmap,
185: const struct path *path, struct kstat *stat,
186: u32 request_mask, unsigned int query_flags)
187: {
188: struct inode *inode = d_inode(path->dentry);
189: struct kernfs_node *kn = inode->i_private;
190: struct kernfs_root *root = kernfs_root(kn);
]
|
| 59/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 27170
output: 37
thoughts: 27
Thoughts: Here's my take on the remaining lines of `fs/kernfs/inode.c`, from line 191 onwards:
**Digging into kernfs Inode Management**
Okay, so I've been through the initial parts of this `kernfs` inode implementation. Now, let's get into the nitty-gritty of the later functions. I anticipate these are going to be critical for understanding how Kernfs interacts with the generic VFS layer, particularly concerning inode operations and, likely, attribute handling and cleanup. I expect to find details on things like how Kernfs handles permission checks, how it manages the lifecycle of the inodes themselves, and, importantly, what strategies are in place for memory allocation and deallocation within this context. The structure here is probably a key to optimizing resource usage and avoiding leaks. I’m thinking we're going to see a lot of reference counting and careful synchronization. I'm also betting there'll be hooks into the page cache for data or metadata access if any kernfs nodes can provide such, and I'm very curious to see how the code deals with the specific requirements of the different types of Kernfs nodes (files, directories, symlinks, etc.) I expect to see specific implementations for some of the more important file operations, or hooks into the generic implementations where possible. I'll need to examine where the core Kernfs inode structure is actually used in operations within the broader kernel.
|
| 60/4 |
2026/09/13 00:30 |
tool |
read-file |
0m
Args: map[File:fs/kernfs/inode.c FirstLine:191 LineCount:100]
Results: map[Contents: 191:
192: down_read(&root->kernfs_iattr_rwsem);
193: kernfs_refresh_inode(kn, inode);
194: generic_fillattr(&nop_mnt_idmap, request_mask, inode, stat);
195: up_read(&root->kernfs_iattr_rwsem);
196:
197: return 0;
198: }
199:
200: static void kernfs_init_inode(struct kernfs_node *kn, struct inode *inode)
201: {
202: kernfs_get(kn);
203: inode->i_private = kn;
204: inode->i_mapping->a_ops = &ram_aops;
205: inode->i_op = &kernfs_iops;
206: inode->i_generation = kernfs_gen(kn);
207:
208: set_default_inode_attr(inode, kn->mode);
209: kernfs_refresh_inode(kn, inode);
210:
211: /* initialize inode according to type */
212: switch (kernfs_type(kn)) {
213: case KERNFS_DIR:
214: inode->i_op = &kernfs_dir_iops;
215: inode->i_fop = &kernfs_dir_fops;
216: if (kn->flags & KERNFS_EMPTY_DIR)
217: make_empty_dir_inode(inode);
218: break;
219: case KERNFS_FILE:
220: inode->i_size = kn->attr.size;
221: inode->i_fop = &kernfs_file_fops;
222: break;
223: case KERNFS_LINK:
224: inode->i_op = &kernfs_symlink_iops;
225: break;
226: default:
227: BUG();
228: }
229:
230: unlock_new_inode(inode);
231: }
232:
233: /**
234: * kernfs_get_inode - get inode for kernfs_node
235: * @sb: super block
236: * @kn: kernfs_node to allocate inode for
237: *
238: * Get inode for @kn. If such inode doesn't exist, a new inode is
239: * allocated and basics are initialized. New inode is returned
240: * locked.
241: *
242: * Locking:
243: * Kernel thread context (may sleep).
244: *
245: * Return:
246: * Pointer to allocated inode on success, %NULL on failure.
247: */
248: struct inode *kernfs_get_inode(struct super_block *sb, struct kernfs_node *kn)
249: {
250: struct inode *inode;
251:
252: inode = iget_locked(sb, kernfs_ino(kn));
253: if (inode && (inode_state_read_once(inode) & I_NEW))
254: kernfs_init_inode(kn, inode);
255:
256: return inode;
257: }
258:
259: /*
260: * The kernfs_node serves as both an inode and a directory entry for
261: * kernfs. To prevent the kernfs inode numbers from being freed
262: * prematurely we take a reference to kernfs_node from the kernfs inode. A
263: * super_operations.evict_inode() implementation is needed to drop that
264: * reference upon inode destruction.
265: */
266: void kernfs_evict_inode(struct inode *inode)
267: {
268: struct kernfs_node *kn = inode->i_private;
269:
270: truncate_inode_pages_final(&inode->i_data);
271: clear_inode(inode);
272: kernfs_put(kn);
273: }
274:
275: int kernfs_iop_permission(struct mnt_idmap *idmap,
276: struct inode *inode, int mask)
277: {
278: struct kernfs_node *kn;
279: struct kernfs_root *root;
280: int ret;
281:
282: if (mask & MAY_NOT_BLOCK)
283: return -ECHILD;
284:
285: kn = inode->i_private;
286: root = kernfs_root(kn);
287:
288: down_read(&root->kernfs_iattr_rwsem);
289: kernfs_refresh_inode(kn, inode);
290: ret = generic_permission(&nop_mnt_idmap, inode, mask);
]
|
| 61/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 29021
output: 36
thoughts: 25
Thoughts: Okay, let's dive into this. Here's my take on those lines of code, presented as if they were my own immediate thoughts:
**Analyzing `fs/kernfs/inode.c` Lines 275-300**
Alright, time to get to it. Let's zero in on lines 275 through 300 of `fs/kernfs/inode.c`. Based on the context, this should be where a significant chunk of the `kernfs` inode lifecycle resides. I need to understand exactly what's happening within this segment. I'm going to start by quickly scanning the function calls within this range to get a feel for the control flow. Are we dealing with creation, deletion, attribute modifications, or perhaps something more complex like file system operations related to the inode's backing data?
First glance, I suspect this section contains the management of some data specific to kernfs inodes. I'll need to figure out the specific operations performed on kernfs inodes. I'm looking for the core logic, anything related to `inode` structs, and the associated data structures. I need to identify any specific `kernfs` data structures that are being manipulated within this window, and how the kernel interacts with them. What about any locks? Are there any obvious race conditions that could occur if the inode is accessed by multiple threads simultaneously? I want to make sure the implementation is robust, and the locking is efficient. I'm also looking for any calls to lower-level file system functions, or any interactions with the VFS layer. Ultimately, I need to form a clear mental model of the inode's role and how it's handled within this specific code block. This understanding is key to making informed decisions about optimization, debugging, or even just general understanding of the code.
|
| 62/4 |
2026/09/13 00:30 |
tool |
read-file |
0m
Args: map[File:fs/kernfs/inode.c FirstLine:275 LineCount:35]
Results: map[Contents: 275: int kernfs_iop_permission(struct mnt_idmap *idmap,
276: struct inode *inode, int mask)
277: {
278: struct kernfs_node *kn;
279: struct kernfs_root *root;
280: int ret;
281:
282: if (mask & MAY_NOT_BLOCK)
283: return -ECHILD;
284:
285: kn = inode->i_private;
286: root = kernfs_root(kn);
287:
288: down_read(&root->kernfs_iattr_rwsem);
289: kernfs_refresh_inode(kn, inode);
290: ret = generic_permission(&nop_mnt_idmap, inode, mask);
291: up_read(&root->kernfs_iattr_rwsem);
292:
293: return ret;
294: }
295:
296: int kernfs_xattr_get(struct kernfs_node *kn, const char *name,
297: void *value, size_t size)
298: {
299: struct kernfs_iattrs *attrs = kernfs_iattrs_noalloc(kn);
300: struct simple_xattr_cache *cache = &kernfs_root(kn)->xa_cache;
301:
302: if (!attrs)
303: return -ENODATA;
304:
305: return simple_xattr_get(cache, &attrs->xattrs, name, value, size);
306: }
307:
308: int kernfs_xattr_set(struct kernfs_node *kn, const char *name,
309: const void *value, size_t size, int flags)
]
|
| 63/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 30005
output: 35
thoughts: 103
Thoughts: **Analyzing `kernfs_iop_permission` and Delving into `generic_permission`**
Okay, let's break down this `kernfs_iop_permission` function. It seems to be handling permissions, and the first thing it does is acquire a read semaphore, `root->kernfs_iattr_rwsem`. That's standard practice to protect attributes, good. Then, a refresh of the inode, using `kernfs_refresh_inode` happens. Interesting, that’s key for keeping the metadata consistent. The core logic I am after, I suspect, is the call to `generic_permission`. This is where the actual permission check happens, and it uses `&nop_mnt_idmap`, which implies no mapping for the permissions. Finally, the semaphore is released. So, the question is, how does `generic_permission` make the decision? Let me go look at its definition and see what's going on under the hood there. Let's see how the actual permission checks are implemented.
|
| 64/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/kernfs/inode.c Name:generic_permission]
Results: map[SourceCode: 499: /**
500: * generic_permission - check for access rights on a Posix-like filesystem
501: * @idmap: idmap of the mount the inode was found from
502: * @inode: inode to check access rights for
503: * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC,
504: * %MAY_NOT_BLOCK ...)
505: *
506: * Used to check for read/write/execute permissions on a file.
507: * We use "fsuid" for this, letting us set arbitrary permissions
508: * for filesystem access without changing the "normal" uids which
509: * are used for other things.
510: *
511: * generic_permission is rcu-walk aware. It returns -ECHILD in case an rcu-walk
512: * request cannot be satisfied (eg. requires blocking or too much complexity).
513: * It would then be called again in ref-walk mode.
514: *
515: * If the inode has been found through an idmapped mount the idmap of
516: * the vfsmount must be passed through @idmap. This function will then take
517: * care to map the inode according to @idmap before checking permissions.
518: * On non-idmapped mounts or if permission checking is to be performed on the
519: * raw inode simply pass @nop_mnt_idmap.
520: */
521: int generic_permission(struct mnt_idmap *idmap, struct inode *inode,
522: int mask)
523: {
524: int ret;
525:
526: /*
527: * Do the basic permission checks.
528: */
529: ret = acl_permission_check(idmap, inode, mask);
530: if (ret != -EACCES)
531: return ret;
532:
533: if (S_ISDIR(inode->i_mode)) {
534: /* DACs are overridable for directories */
535: if (!(mask & MAY_WRITE))
536: if (capable_wrt_inode_uidgid(idmap, inode,
537: CAP_DAC_READ_SEARCH))
538: return 0;
539: if (capable_wrt_inode_uidgid(idmap, inode,
540: CAP_DAC_OVERRIDE))
541: return 0;
542: return -EACCES;
543: }
544:
545: /*
546: * Searching includes executable on directories, else just read.
547: */
548: mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
549: if (mask == MAY_READ)
550: if (capable_wrt_inode_uidgid(idmap, inode,
551: CAP_DAC_READ_SEARCH))
552: return 0;
553: /*
554: * Read/write DACs are always overridable.
555: * Executable DACs are overridable when there is
556: * at least one exec bit set.
557: */
558: if (!(mask & MAY_EXEC) || (inode->i_mode & S_IXUGO))
559: if (capable_wrt_inode_uidgid(idmap, inode,
560: CAP_DAC_OVERRIDE))
561: return 0;
562:
563: return -EACCES;
564: }
SourceFile:fs/namei.c]
|
| 65/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 31434
output: 35
thoughts: 137
Thoughts: **Analyzing the Generic Permission Check**
Alright, let's dive into this `generic_permission()` function. First, it looks like it's going through the standard permission checks with `acl_permission_check()`. It seems like the common access control list checks are done here, and if those fail with `-EACCES`, the function continues. The interesting part, though, is what follows. It's looking to see if the requested access `mask` *includes* execute permissions (`MAY_EXEC`). If it *does* include execute, and the inode's mode has execute bits set (`S_IXUGO`), or if the `MAY_EXEC` bit is *not* present (e.g., read only), then it proceeds to check a capability. This looks like a DAC (Discretionary Access Control) override check using `capable_wrt_inode_uidgid()` to see if the current process has `CAP_DAC_OVERRIDE`. If so, access is granted. So, the core of the logic here seems to be about granting execution based on permissions. It's a fairly standard setup, checking ACLs first, then falls back to more granular permissions, like potentially allowing overrides based on capabilities. Now, let's see what happens inside of `acl_permission_check()`...
|
| 66/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/namei.c Name:acl_permission_check]
Results: map[SourceCode: 422: /**
423: * acl_permission_check - perform basic UNIX permission checking
424: * @idmap: idmap of the mount the inode was found from
425: * @inode: inode to check permissions on
426: * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC ...)
427: *
428: * This function performs the basic UNIX permission checking. Since this
429: * function may retrieve POSIX acls it needs to know whether it is called from a
430: * blocking or non-blocking context and thus cares about the MAY_NOT_BLOCK bit.
431: *
432: * If the inode has been found through an idmapped mount the idmap of
433: * the vfsmount must be passed through @idmap. This function will then take
434: * care to map the inode according to @idmap before checking permissions.
435: * On non-idmapped mounts or if permission checking is to be performed on the
436: * raw inode simply pass @nop_mnt_idmap.
437: */
438: static int acl_permission_check(struct mnt_idmap *idmap,
439: struct inode *inode, int mask)
440: {
441: unsigned int mode = inode->i_mode;
442: vfsuid_t vfsuid;
443:
444: /*
445: * Common cheap case: everybody has the requested
446: * rights, and there are no ACLs to check. No need
447: * to do any owner/group checks in that case.
448: *
449: * - 'mask&7' is the requested permission bit set
450: * - multiplying by 0111 spreads them out to all of ugo
451: * - '& ~mode' looks for missing inode permission bits
452: * - the '!' is for "no missing permissions"
453: *
454: * After that, we just need to check that there are no
455: * ACL's on the inode - do the 'IS_POSIXACL()' check last
456: * because it will dereference the ->i_sb pointer and we
457: * want to avoid that if at all possible.
458: */
459: if (!((mask & 7) * 0111 & ~mode)) {
460: if (no_acl_inode(inode))
461: return 0;
462: if (!IS_POSIXACL(inode))
463: return 0;
464: }
465:
466: /* Are we the owner? If so, ACL's don't matter */
467: vfsuid = i_uid_into_vfsuid(idmap, inode);
468: if (likely(vfsuid_eq_kuid(vfsuid, current_fsuid()))) {
469: mask &= 7;
470: mode >>= 6;
471: return (mask & ~mode) ? -EACCES : 0;
472: }
473:
474: /* Do we have ACL's? */
475: if (IS_POSIXACL(inode) && (mode & S_IRWXG)) {
476: int error = check_acl(idmap, inode, mask);
477: if (error != -EAGAIN)
478: return error;
479: }
480:
481: /* Only RWX matters for group/other mode bits */
482: mask &= 7;
483:
484: /*
485: * Are the group permissions different from
486: * the other permissions in the bits we care
487: * about? Need to check group ownership if so.
488: */
489: if (mask & (mode ^ (mode >> 3))) {
490: vfsgid_t vfsgid = i_gid_into_vfsgid(idmap, inode);
491: if (vfsgid_in_group_p(vfsgid))
492: mode >>= 3;
493: }
494:
495: /* Bits in 'mode' clear that we require? */
496: return (mask & ~mode) ? -EACCES : 0;
497: }
SourceFile:fs/namei.c]
|
| 67/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 33160
output: 39
thoughts: 756
Thoughts: **Analyzing `acl_permission_check` and User Namespaces**
Okay, let's break this down. I'm looking at `acl_permission_check` and immediately I'm thinking about user namespaces. The first thing that catches my eye is the check: `vfsuid = i_uid_into_vfsuid(idmap, inode); if (likely(vfsuid_eq_kuid(vfsuid, current_fsuid())))`. My mind immediately goes to the potential for confusion introduced by user namespace mappings.
I see `current_fsuid()`, and I know that returns a `kuid_t`. Ah, right, in a user namespace, an unprivileged user can map their external UID (say, 1000) to UID 0 *inside* the namespace. So their *internal* UID is 0. But what's `current_fsuid()` returning in the *kernel* context? It's going to be the *kernel's* view of their UID which is `current_cred()->fsuid`, and that's going to be the *unmapped* UID (e.g. 1000, assuming they mapped 1000 to 0). So, I need to understand `vfsuid` better, and how it relates to this mapping.
Aha! It looks like `vfsuid` comes from `kernfs_iop_permission`, which calls `generic_permission` with `&nop_mnt_idmap`. That's key. With `nop_mnt_idmap`, `vfsuid` is just `inode->i_uid`. And where does that come from? Let's check `fs/kernfs/inode.c`: it's either `GLOBAL_ROOT_UID` or whatever's set in `attrs->ia_uid`. `GLOBAL_ROOT_UID` is initialized to `KUIDT_INIT(0)`.
Okay, so we're comparing `GLOBAL_ROOT_UID` (0) with `current_fsuid()` (1000, the *kernel* view of the user's UID). Those are *not* equal. This is crucial because even if they map their UID to 0 *inside* the namespace, their *kernel* `kuid` (e.g., the UID from the parent namespace, or whatever they are mapping to) remains 1000 (unless they also gain the privileges needed to change it in the parent namespace), not `GLOBAL_ROOT_UID`.
Wait, can they map `GLOBAL_ROOT_UID`? No, no, they cannot. An unprivileged user can't map UID 0 (root) to the `GLOBAL_ROOT_UID`. They need `CAP_SETUID` (in the parent namespace) for that, which they won't have. So, the kernel `kuid` is still their real, unmapped, UID (1000), not `GLOBAL_ROOT_UID` (0). I need to remember this distinction between the *internal* and *external/kernel* UID in my analysis.
Now, let's think about `capable_wrt_inode_uidgid(idmap, inode, CAP_DAC_OVERRIDE)`. I'll need to look up the definition of that function to see how it interacts with all this.
|
| 68/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/namei.c Name:capable_wrt_inode_uidgid]
Results: map[SourceCode: 463: /**
464: * capable_wrt_inode_uidgid - Check nsown_capable and uid and gid mapped
465: * @idmap: idmap of the mount @inode was found from
466: * @inode: The inode in question
467: * @cap: The capability in question
468: *
469: * Return true if the current task has the given capability targeted at
470: * its own user namespace and that the given inode's uid and gid are
471: * mapped into the current user namespace.
472: */
473: bool capable_wrt_inode_uidgid(struct mnt_idmap *idmap,
474: const struct inode *inode, int cap)
475: {
476: struct user_namespace *ns = current_user_ns();
477:
478: return ns_capable(ns, cap) &&
479: privileged_wrt_inode_uidgid(ns, idmap, inode);
480: }
SourceFile:kernel/capability.c]
|
| 69/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 35002
output: 38
thoughts: 36
Thoughts: Okay, here's my interpretation of those thoughts, speaking as an expert:
**Internal Audit - Kernel File System Permissions**
Alright, that's interesting. I see a `capable_wrt_inode_uidgid` function call. My brain immediately jumps to checking its counterpart, `privileged_wrt_inode_uidgid`. I need to understand the relationship between these two, specifically how they are used within the kernel's file system permission checks. I'm already anticipating the potential security implications. One is clearly about capability-based access, the other about privileged access, and understanding their interaction is crucial for spotting potential vulnerabilities or unexpected behavior. Time to delve into the code and see exactly how these functions are used.
|
| 70/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:kernel/capability.c Name:privileged_wrt_inode_uidgid]
Results: map[SourceCode: 447: /**
448: * privileged_wrt_inode_uidgid - Do capabilities in the namespace work over the inode?
449: * @ns: The user namespace in question
450: * @idmap: idmap of the mount @inode was found from
451: * @inode: The inode in question
452: *
453: * Return true if the inode uid and gid are within the namespace.
454: */
455: bool privileged_wrt_inode_uidgid(struct user_namespace *ns,
456: struct mnt_idmap *idmap,
457: const struct inode *inode)
458: {
459: return vfsuid_has_mapping(ns, i_uid_into_vfsuid(idmap, inode)) &&
460: vfsgid_has_mapping(ns, i_gid_into_vfsgid(idmap, inode));
461: }
SourceFile:kernel/capability.c]
|
| 71/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 35519
output: 33
thoughts: 150
Thoughts: **Examining the User Namespace UID/GID Mapping**
Okay, so I'm looking at this `privileged_wrt_inode_uidgid` function. Seems straightforward enough – checks if the user and group IDs have mappings within the current user namespace. But, wait a minute, the gears are turning... I need to consider a potential edge case.
I'm focusing in on the global root, UID 0 and GID 0. Is there a scenario where global root is actually *mapped* within an unprivileged user's namespace? My initial thought is that it shouldn't be, but I need to make certain. Can an unprivileged user even *create* a mapping for the root user? If they can't, then this function will always return false for root. If they *can*, the consequences are important for security!
Alright, it's time to dive into `user_namespace.c` and confirm exactly how UID/GID mappings behave when a new user namespace is created, especially focusing on what restrictions, if any, are placed on unprivileged users with regards to mapping the global root. I need to understand this fundamental aspect of user namespaces to ensure I grasp the implications of this function call in the broader context of privilege escalation and security.
|
| 72/4 |
2026/09/13 00:30 |
tool |
grepper |
0m
Args: map[Expression:new_idmap_permitted PathPrefix:kernel/user_namespace.c]
Results: map[Output:kernel/user_namespace.c=27=static DEFINE_MUTEX(userns_state_mutex);
kernel/user_namespace.c-28-
kernel/user_namespace.c:29:static bool new_idmap_permitted(const struct file *file,
kernel/user_namespace.c-30- struct user_namespace *ns, int cap_setid,
--
kernel/user_namespace.c=932=static ssize_t map_write(struct file *file, const char __user *buf,
--
kernel/user_namespace.c-1055- /* Validate the user is allowed to use user id's mapped to. */
kernel/user_namespace.c:1056: if (!new_idmap_permitted(file, map_ns, cap_setid, &new_map))
kernel/user_namespace.c-1057- goto out;
--
kernel/user_namespace.c=1154=ssize_t proc_projid_map_write(struct file *file, const char __user *buf,
--
kernel/user_namespace.c-1171-
kernel/user_namespace.c:1172:static bool new_idmap_permitted(const struct file *file,
kernel/user_namespace.c-1173- struct user_namespace *ns, int cap_setid,
]
|
| 73/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 36309
output: 36
thoughts: 21
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into `user_namespace.c`**
Okay, time to get my hands dirty. I'm thinking I need to refresh my memory on user namespaces and how they interact with the kernel, specifically around... well, the details I'm wrestling with right now. I'm going to jump into `kernel/user_namespace.c`. Line 1172... that's probably a good starting point to retrace the control flow I'm trying to track. I'm expecting that area to contain a key element relating to the interaction between the different user spaces, probably something to do with the permissions or ID mapping I've been tracing. Let's see what kind of context I find there. Hopefully, that will immediately offer up clues that will make the puzzle fall into place!
|
| 74/4 |
2026/09/13 00:30 |
tool |
read-file |
0m
Args: map[File:kernel/user_namespace.c FirstLine:1172 LineCount:60]
Results: map[Contents:1172: static bool new_idmap_permitted(const struct file *file,
1173: struct user_namespace *ns, int cap_setid,
1174: struct uid_gid_map *new_map)
1175: {
1176: const struct cred *cred = file->f_cred;
1177:
1178: if (cap_setid == CAP_SETUID && !verify_root_map(file, ns, new_map))
1179: return false;
1180:
1181: /* Don't allow mappings that would allow anything that wouldn't
1182: * be allowed without the establishment of unprivileged mappings.
1183: */
1184: if ((new_map->nr_extents == 1) && (new_map->extent[0].count == 1) &&
1185: uid_eq(ns->owner, cred->euid)) {
1186: u32 id = new_map->extent[0].lower_first;
1187: if (cap_setid == CAP_SETUID) {
1188: kuid_t uid = make_kuid(ns->parent, id);
1189: if (uid_eq(uid, cred->euid))
1190: return true;
1191: } else if (cap_setid == CAP_SETGID) {
1192: kgid_t gid = make_kgid(ns->parent, id);
1193: if (!(ns->flags & USERNS_SETGROUPS_ALLOWED) &&
1194: gid_eq(gid, cred->egid))
1195: return true;
1196: }
1197: }
1198:
1199: /* Allow anyone to set a mapping that doesn't require privilege */
1200: if (!cap_valid(cap_setid))
1201: return true;
1202:
1203: /* Allow the specified ids if we have the appropriate capability
1204: * (CAP_SETUID or CAP_SETGID) over the parent user namespace.
1205: * And the opener of the id file also has the appropriate capability.
1206: */
1207: if (ns_capable(ns->parent, cap_setid) &&
1208: file_ns_capable(file, ns->parent, cap_setid))
1209: return true;
1210:
1211: return false;
1212: }
1213:
1214: int proc_setgroups_show(struct seq_file *seq, void *v)
1215: {
1216: struct user_namespace *ns = seq->private;
1217: unsigned long userns_flags = READ_ONCE(ns->flags);
1218:
1219: seq_printf(seq, "%s\n",
1220: (userns_flags & USERNS_SETGROUPS_ALLOWED) ?
1221: "allow" : "deny");
1222: return 0;
1223: }
1224:
1225: ssize_t proc_setgroups_write(struct file *file, const char __user *buf,
1226: size_t count, loff_t *ppos)
1227: {
1228: struct seq_file *seq = file->private_data;
1229: struct user_namespace *ns = seq->private;
1230: char kbuf[8], *pos;
1231: bool setgroups_allowed;
]
|
| 75/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 37545
output: 38
thoughts: 1109
Thoughts: **Analyzing Sysfs Permissions in Unprivileged User Namespaces**
Okay, let's break this down systematically. I'm looking at how an unprivileged user, without `CAP_SETUID` or `CAP_SETGID` in their parent namespace, interacts with a sysfs file. The core question is: can they write to it?
First, I'm confirming that an unprivileged user *cannot* map the global root UID (0) into their own user namespace. `new_idmap_permitted` enforces that. The user can only map their *own* UID/GID, and even with `newuidmap`, subuids assigned via `/etc/subuid` never include 0. Therefore, UID 0 *is not* mapped inside the unprivileged user's namespace.
This immediately means that functions like `vfsuid_has_mapping(ns, i_uid_into_vfsuid(idmap, inode))` will return false when checking for UID 0 within the current user namespace. Consequently, `privileged_wrt_inode_uidgid` also returns false, and so does `capable_wrt_inode_uidgid(idmap, inode, CAP_DAC_OVERRIDE)`.
Now, the permission checks kick in. I'm focusing on what happens when the user isn't the owner or in the group of the sysfs file. Since the user's UID is, say, 1000 and the inode's UID is 0, the check against the owner fails. Similarly, the group check fails. This brings us to the "other" (world) bits in the file permissions.
The sysfs file has permissions `0644`. That means read-write for the owner, read-only for the group, and *read-only* for "other". When the unprivileged user attempts to write (`MAY_WRITE` is in the mask), the permission check `mask & ~mode` becomes true. This, in turn, leads to `acl_permission_check` returning `-EACCES` because write access is not granted to "other".
Next, `generic_permission()` is called. It checks if DAC override is possible via `capable_wrt_inode_uidgid(idmap, inode, CAP_DAC_OVERRIDE)`. But, since the inode's UID (0) *isn't* mapped, `privileged_wrt_inode_uidgid()` returns false, and so does `capable_wrt_inode_uidgid()`. This confirms the lack of DAC override. As a result, `generic_permission()` also returns `-EACCES`.
Finally, and this is important, I need to understand what's the deal with `sb->s_user_ns`. When sysfs is mounted, what's its user namespace? Looking at `sysfs_init_fs_context`, `fc->global = true;` implies that `kernfs_get_tree` and other functions using this will apply in the context of the root user namespace. This reinforces the conclusion: an unprivileged user can't write to the sysfs file, because they're essentially interacting with file permissions associated with the *global* root, which is not mapped to them. This is the intended security model.
|
| 76/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/sysfs/mount.c Name:kernfs_get_tree]
Results: map[SourceCode: 355: /**
356: * kernfs_get_tree - kernfs filesystem access/retrieval helper
357: * @fc: The filesystem context.
358: *
359: * This is to be called from each kernfs user's fs_context->ops->get_tree()
360: * implementation, which should set the specified ->@fs_type and ->@flags, and
361: * specify the hierarchy and namespace tag to mount via ->@root and ->@ns,
362: * respectively.
363: *
364: * Return: %0 on success, -errno on failure.
365: */
366: int kernfs_get_tree(struct fs_context *fc)
367: {
368: struct kernfs_fs_context *kfc = fc->fs_private;
369: struct super_block *sb;
370: struct kernfs_super_info *info;
371: int error;
372:
373: info = kzalloc_obj(*info);
374: if (!info)
375: return -ENOMEM;
376:
377: info->root = kfc->root;
378: info->ns = kfc->ns_tag;
379: INIT_LIST_HEAD(&info->node);
380:
381: fc->s_fs_info = info;
382: sb = sget_fc(fc, kernfs_test_super, kernfs_set_super);
383: if (IS_ERR(sb))
384: return PTR_ERR(sb);
385:
386: if (!sb->s_root) {
387: struct kernfs_super_info *info = kernfs_info(sb);
388: struct kernfs_root *root = kfc->root;
389:
390: kfc->new_sb_created = true;
391:
392: error = kernfs_fill_super(sb, kfc);
393: if (error) {
394: deactivate_locked_super(sb);
395: return error;
396: }
397: sb->s_flags |= SB_ACTIVE;
398:
399: uuid_t uuid;
400: uuid_gen(&uuid);
401: super_set_uuid(sb, uuid.b, sizeof(uuid));
402:
403: down_write(&root->kernfs_supers_rwsem);
404: list_add(&info->node, &info->root->supers);
405: up_write(&root->kernfs_supers_rwsem);
406: }
407:
408: fc->root = dget(sb->s_root);
409: return 0;
410: }
SourceFile:fs/kernfs/mount.c]
|
| 77/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 40253
output: 27
thoughts: 198
Thoughts: **Analyzing User Namespace Interactions in `fs/sysfs/mount.c`**
Okay, let's dive into this code snippet in `fs/sysfs/mount.c`, specifically lines 60-65. I'm focusing on how user and network namespaces interact here, and this section is crucial. I see a conditional block that deals with a network namespace, `ns`. My initial thought is that if `ns` exists, we're dealing with a `net` namespace. The code retrieves this `net` namespace as `netns`. Now, if an unprivileged user crafts a user namespace *and* a network namespace, `netns->user_ns` is actually that very same unprivileged user's namespace!
The next line, `fc->user_ns = get_user_ns(netns->user_ns)`, is the interesting bit. We are grabbing a reference to that user's namespace. The subsequent question becomes: what happens with this `fc->user_ns` variable?
It looks like the `sget_fc` function needs closer inspection, and I suspect it leverages `fc->user_ns` internally. I'm seeing it right here! `sb->s_user_ns = get_user_ns(fc->user_ns);` This looks like the critical connection, where the user namespace associated with the mount is set on the superblock. It appears I need to refresh myself on `sget_fc`'s function!
|
| 78/4 |
2026/09/13 00:30 |
tool |
grepper |
0m
Args: map[Expression:s_user_ns PathPrefix:fs/]
Results: map[Output:fs/9p/acl.c=155=int v9fs_iop_set_acl(struct mnt_idmap *idmap, struct dentry *dentry,
--
fs/9p/acl.c-165- if (acl) {
fs/9p/acl.c:166: retval = posix_acl_valid(inode->i_sb->s_user_ns, acl);
fs/9p/acl.c-167- if (retval)
--
fs/attr.c=94=static bool chown_ok(struct mnt_idmap *idmap,
--
fs/attr.c-103- if (!vfsuid_valid(vfsuid) &&
fs/attr.c:104: ns_capable(inode->i_sb->s_user_ns, CAP_CHOWN))
fs/attr.c-105- return true;
--
fs/attr.c=121=static bool chgrp_ok(struct mnt_idmap *idmap,
--
fs/attr.c-134- if (!vfsgid_valid(vfsgid) &&
fs/attr.c:135: ns_capable(inode->i_sb->s_user_ns, CAP_CHOWN))
fs/attr.c-136- return true;
--
fs/attr.c=427=int notify_change(struct mnt_idmap *idmap, struct dentry *dentry,
--
fs/attr.c-521- if (ia_valid & ATTR_UID &&
fs/attr.c:522: !vfsuid_has_fsmapping(idmap, inode->i_sb->s_user_ns,
fs/attr.c-523- attr->ia_vfsuid))
--
fs/attr.c-525- if (ia_valid & ATTR_GID &&
fs/attr.c:526: !vfsgid_has_fsmapping(idmap, inode->i_sb->s_user_ns,
fs/attr.c-527- attr->ia_vfsgid))
--
fs/binfmt_misc.c=1131=static struct binfmt_misc *i_binfmt_misc(struct inode *inode)
fs/binfmt_misc.c-1132-{
fs/binfmt_misc.c:1133: return inode->i_sb->s_user_ns->binfmt_misc;
fs/binfmt_misc.c-1134-}
--
fs/binfmt_misc.c=1462=static ssize_t bm_register_write(struct file *file, const char __user *buffer,
--
fs/binfmt_misc.c-1473- if (test_bit(MISC_FMT_BPF_BIT, &e->flags)) {
fs/binfmt_misc.c:1474: e->bpf_ops = binfmt_misc_get_ops(sb->s_user_ns, e->bpf_ops_name);
fs/binfmt_misc.c-1475- if (!e->bpf_ops) {
--
fs/binfmt_misc.c=1558=static int bm_fill_super(struct super_block *sb, struct fs_context *fc)
--
fs/binfmt_misc.c-1560- int err;
fs/binfmt_misc.c:1561: struct user_namespace *user_ns = sb->s_user_ns;
fs/binfmt_misc.c-1562- struct binfmt_misc *misc;
--
fs/f2fs/recovery.c=242=static int recover_quota_data(struct inode *inode, struct folio *folio)
--
fs/f2fs/recovery.c-251-
fs/f2fs/recovery.c:252: attr.ia_vfsuid = VFSUIDT_INIT(make_kuid(inode->i_sb->s_user_ns, i_uid));
fs/f2fs/recovery.c:253: attr.ia_vfsgid = VFSGIDT_INIT(make_kgid(inode->i_sb->s_user_ns, i_gid));
fs/f2fs/recovery.c-254-
--
fs/fhandle.c=301=static inline int may_decode_fh(struct handle_to_path_ctx *ctx,
--
fs/fhandle.c-332-
fs/fhandle.c:333: if (ns_capable(root->mnt->mnt_sb->s_user_ns, CAP_SYS_ADMIN))
fs/fhandle.c-334- ctx->flags = HANDLE_CHECK_PERMS;
--
fs/fs_context.c=258=static struct fs_context *alloc_fs_context(struct file_system_type *fs_type,
--
fs/fs_context.c-285- case FS_CONTEXT_FOR_SUBMOUNT:
fs/fs_context.c:286: fc->user_ns = get_user_ns(reference->d_sb->s_user_ns);
fs/fs_context.c-287- break;
--
fs/fs_context.c-289- atomic_inc(&reference->d_sb->s_active);
fs/fs_context.c:290: fc->user_ns = get_user_ns(reference->d_sb->s_user_ns);
fs/fs_context.c-291- fc->root = dget(reference);
--
fs/fsopen.c=251=static int vfs_cmd_reconfigure(struct fs_context *fc)
--
fs/fsopen.c-261- sb = fc->root->d_sb;
fs/fsopen.c:262: if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) {
fs/fsopen.c-263- fc->phase = FS_CONTEXT_FAILED;
--
fs/fuse/inode.c=1598=static void fuse_sb_defaults(struct super_block *sb)
--
fs/fuse/inode.c-1608- sb->s_iflags |= SB_I_NO_DATA_INTEGRITY;
fs/fuse/inode.c:1609: if (sb->s_user_ns != &init_user_ns)
fs/fuse/inode.c-1610- sb->s_iflags |= SB_I_UNTRUSTED_MOUNTER;
--
fs/ioctl.c=385=static int ioctl_fsfreeze(struct file *filp)
--
fs/ioctl.c-388-
fs/ioctl.c:389: if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
fs/ioctl.c-390- return -EPERM;
--
fs/ioctl.c=402=static int ioctl_fsthaw(struct file *filp)
--
fs/ioctl.c-405-
fs/ioctl.c:406: if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
fs/ioctl.c-407- return -EPERM;
--
fs/namespace.c=1870=static int do_umount(struct mount *mnt, int flags)
--
fs/namespace.c-1932- */
fs/namespace.c:1933: if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
fs/namespace.c-1934- return -EPERM;
--
fs/namespace.c=2021=static int can_umount(const struct path *path, int flags)
--
fs/namespace.c-2033- return -EINVAL;
fs/namespace.c:2034: if (flags & MNT_FORCE && !ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
fs/namespace.c-2035- return -EPERM;
--
fs/namespace.c=3378=static int do_remount(const struct path *path, int sb_flags,
--
fs/namespace.c-3408- err = -EPERM;
fs/namespace.c:3409: if (ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) {
fs/namespace.c-3410- err = reconfigure_super(fc);
--
fs/namespace.c=4806=static int can_idmap_mount(const struct mount_kattr *kattr, struct mount *mnt)
--
fs/namespace.c-4808- struct vfsmount *m = &mnt->mnt;
fs/namespace.c:4809: struct user_namespace *fs_userns = m->mnt_sb->s_user_ns;
fs/namespace.c-4810-
--
fs/namespace.c-4817- */
fs/namespace.c:4818: if (kattr->mnt_userns == m->mnt_sb->s_user_ns)
fs/namespace.c-4819- return -EINVAL;
--
fs/namespace.c=6456=bool mnt_may_suid(struct vfsmount *mnt)
--
fs/namespace.c-6465- return !(mnt->mnt_flags & MNT_NOSUID) && check_mnt(real_mount(mnt)) &&
fs/namespace.c:6466: current_in_userns(mnt->mnt_sb->s_user_ns);
fs/namespace.c-6467-}
--
fs/notify/fanotify/fanotify_user.c=1856=static int do_fanotify_mark(int fanotify_fd, unsigned int flags, __u64 mask,
--
fs/notify/fanotify/fanotify_user.c-2058- } else if (obj_type == FSNOTIFY_OBJ_TYPE_VFSMOUNT) {
fs/notify/fanotify/fanotify_user.c:2059: user_ns = path.mnt->mnt_sb->s_user_ns;
fs/notify/fanotify/fanotify_user.c-2060- obj = path.mnt;
fs/notify/fanotify/fanotify_user.c-2061- } else if (obj_type == FSNOTIFY_OBJ_TYPE_SB) {
fs/notify/fanotify/fanotify_user.c:2062: user_ns = path.mnt->mnt_sb->s_user_ns;
fs/notify/fanotify/fanotify_user.c-2063- obj = path.mnt->mnt_sb;
--
fs/posix_acl.c=940=set_posix_acl(struct mnt_idmap *idmap, struct dentry *dentry,
--
fs/posix_acl.c-955- if (acl) {
fs/posix_acl.c:956: int ret = posix_acl_valid(inode->i_sb->s_user_ns, acl);
fs/posix_acl.c-957- if (ret)
--
fs/quota/dquot.c=950=struct dquot *dqget(struct super_block *sb, struct kqid qid)
--
fs/quota/dquot.c-954-
fs/quota/dquot.c:955: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/dquot.c-956- return ERR_PTR(-EINVAL);
--
fs/quota/dquot.c=2429=int dquot_load_quota_sb(struct super_block *sb, int type, int format_id,
--
fs/quota/dquot.c-2450- /* Filesystems outside of init_user_ns not yet supported */
fs/quota/dquot.c:2451: if (sb->s_user_ns != &init_user_ns) {
fs/quota/dquot.c-2452- error = -EINVAL;
--
fs/quota/quota.c=201=static int quota_getquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-211- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:212: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-213- return -EINVAL;
--
fs/quota/quota.c=237=static int quota_getnextquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-247- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:248: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-249- return -EINVAL;
--
fs/quota/quota.c=287=static int quota_setquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-306- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:307: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-308- return -EINVAL;
--
fs/quota/quota.c=624=static int quota_setxquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-635- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:636: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-637- return -EINVAL;
fs/quota/quota.c-638- /* Are we actually setting timer / warning limits for all users? */
fs/quota/quota.c:639: if (from_kqid(sb->s_user_ns, qid) == 0 &&
fs/quota/quota.c-640- fdq.d_fieldmask & (FS_DQ_WARNS_MASK | FS_DQ_TIMER_MASK)) {
--
fs/quota/quota.c=705=static int quota_getxquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-715- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:716: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-717- return -EINVAL;
--
fs/quota/quota.c=731=static int quota_getnextxquota(struct super_block *sb, int type, qid_t id,
--
fs/quota/quota.c-742- qid = make_kqid(current_user_ns(), type, id);
fs/quota/quota.c:743: if (!qid_has_mapping(sb->s_user_ns, qid))
fs/quota/quota.c-744- return -EINVAL;
--
fs/super.c=293=static void destroy_super_work(struct work_struct *work)
--
fs/super.c-298- security_sb_free(s);
fs/super.c:299: put_user_ns(s->s_user_ns);
fs/super.c-300- /* Only an unregistered entry is still owned by the superblock. */
--
fs/super.c=337=static struct super_block *alloc_super(struct file_system_type *type, int flags,
--
fs/super.c-346-
fs/super.c:347: s->s_user_ns = get_user_ns(user_ns);
fs/super.c-348- init_rwsem(&s->s_umount);
--
fs/super.c-377- s->s_flags = flags;
fs/super.c:378: if (s->s_user_ns != &init_user_ns)
fs/super.c-379- s->s_iflags |= SB_I_NODEV;
--
fs/super.c=857=struct super_block *sget_fc(struct fs_context *fc,
--
fs/super.c-866- /*
fs/super.c:867: * Never allow s_user_ns != &init_user_ns when FS_USERNS_MOUNT or
fs/super.c-868- * FS_USERNS_DELEGATABLE is not set, as the filesystem is likely
--
fs/super.c-921-share_extant_sb:
fs/super.c:922: if (user_ns != old->s_user_ns || fc->exclusive) {
fs/super.c-923- spin_unlock(&sb_lock);
--
fs/xfs/xfs_icache.c=1634=xfs_blockgc_free_dquots(
--
fs/xfs/xfs_icache.c-1653- if (XFS_IS_UQUOTA_ENFORCED(mp) && udqp && xfs_dquot_lowsp(udqp)) {
fs/xfs/xfs_icache.c:1654: icw.icw_uid = make_kuid(mp->m_super->s_user_ns, udqp->q_id);
fs/xfs/xfs_icache.c-1655- icw.icw_flags |= XFS_ICWALK_FLAG_UID;
--
fs/xfs/xfs_icache.c-1659- if (XFS_IS_UQUOTA_ENFORCED(mp) && gdqp && xfs_dquot_lowsp(gdqp)) {
fs/xfs/xfs_icache.c:1660: icw.icw_gid = make_kgid(mp->m_super->s_user_ns, gdqp->q_id);
fs/xfs/xfs_icache.c-1661- icw.icw_flags |= XFS_ICWALK_FLAG_GID;
--
fs/xfs/xfs_itable.c=64=xfs_bulkstat_one_int(
--
fs/xfs/xfs_itable.c-70-{
fs/xfs/xfs_itable.c:71: struct user_namespace *sb_userns = mp->m_super->s_user_ns;
fs/xfs/xfs_itable.c-72- struct xfs_inode *ip; /* incore inode pointer */
--
fs/xfs/xfs_qm.c=1846=xfs_qm_vop_dqalloc(
--
fs/xfs/xfs_qm.c-1857- struct inode *inode = VFS_I(ip);
fs/xfs/xfs_qm.c:1858: struct user_namespace *user_ns = inode->i_sb->s_user_ns;
fs/xfs/xfs_qm.c-1859- struct xfs_dquot *uq = NULL;
--
fs/xfs/xfs_trace.h=4897=DECLARE_EVENT_CLASS(xfs_icwalk_class,
--
fs/xfs/xfs_trace.h-4913- __entry->flags = icw ? icw->icw_flags : 0;
fs/xfs/xfs_trace.h:4914: __entry->uid = icw ? from_kuid(mp->m_super->s_user_ns,
fs/xfs/xfs_trace.h-4915- icw->icw_uid) : 0;
fs/xfs/xfs_trace.h:4916: __entry->gid = icw ? from_kgid(mp->m_super->s_user_ns,
fs/xfs/xfs_trace.h-4917- icw->icw_gid) : 0;
]
|
| 79/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 46008
output: 38
thoughts: 403
Thoughts: **Analyzing Superblock Handling and Namespace Interaction**
Okay, hold on a second! I need to trace through this. Let me check `fs/super.c`. Ah, there it is: `if (s->s_user_ns != &init_user_ns) s->s_iflags |= SB_I_NODEV;`. Interesting... that's the key. Now, what about `sysfs_init_fs_context`? How does that work in this context? Let's dive into `fs/sysfs/mount.c`.
Okay, I see it. The `sysfs_init_fs_context` function shows how it's handling the mounting:
```c
static int sysfs_init_fs_context(struct fs_context *fc)
{
struct kernfs_fs_context *kfc;
struct ns_common *ns;
if (!(fc->sb_flags & SB_KERNMOUNT)) {
if (!kobj_ns_current_may_mount(KOBJ_NS_TYPE_NET))
return -EPERM;
}
kfc = kzalloc_obj(struct kernfs_fs_context);
if (!kfc)
return -ENOMEM;
kfc->ns_tag = ns = kobj_ns_grab_current(KOBJ_NS_TYPE_NET);
kfc->root = sysfs_root;
kfc->magic = SYSFS_MAGIC;
fc->fs_private = kfc;
fc->ops = &sysfs_fs_context_ops;
if (ns) {
struct net *netns = to_net_ns(ns);
put_user_ns(fc->user_ns);
fc->user_ns = get_user_ns(netns->user_ns);
}
fc->global = true;
return 0;
}
```
Okay, so it grabs the namespace, and if it's not a kernmount, it checks for permissions, then initializes the kernfs context. And then it swaps out the user namespace... This *is* the critical path, isn't it? Okay, but how does kernfs ensure the correct superblock is chosen? I need to check the superblock matching. Where is it? Ah, `kernfs_test_super` in `fs/kernfs/mount.c`. Got it. Let's see how that works...
|
| 80/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/kernfs/mount.c Name:kernfs_test_super]
Results: map[SourceCode: 326: static int kernfs_test_super(struct super_block *sb, struct fs_context *fc)
327: {
328: struct kernfs_super_info *sb_info = kernfs_info(sb);
329: struct kernfs_super_info *info = fc->s_fs_info;
330:
331: return sb_info->root == info->root && sb_info->ns == info->ns;
332: }
SourceFile:fs/kernfs/mount.c]
|
| 81/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 47161
output: 33
thoughts: 12
Thoughts: Okay, let's dive into this. Here's my take on those thoughts, as if they're my own:
**Analyzing `sget_fc`**
Right, let's get down to brass tacks. I'm focusing in on `sget_fc` here. My immediate question is: what is its role? Is it a crucial utility function, a performance bottleneck, or something else entirely? To really understand its impact, I'll need to consider its context within the larger system. What data does it handle? What are its inputs and outputs? Are there any potential areas for optimization, or perhaps areas where it could introduce unwanted side effects? I’ll need to understand the underlying logic to determine whether this is an area that warrants deeper investigation.
|
| 82/4 |
2026/09/13 00:30 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:fs/super.c Name:sget_fc]
Results: map[SourceCode: 825: /**
826: * sget_fc - Find or create a superblock
827: * @fc: Filesystem context.
828: * @test: Comparison callback
829: * @set: Setup callback
830: *
831: * Create a new superblock or find an existing one.
832: *
833: * The @test callback is used to find a matching existing superblock.
834: * Whether or not the requested parameters in @fc are taken into account
835: * is specific to the @test callback that is used. They may even be
836: * completely ignored.
837: *
838: * If an extant superblock is matched, it will be returned unless:
839: *
840: * (1) the namespace the filesystem context @fc and the extant
841: * superblock's namespace differ
842: *
843: * (2) the filesystem context @fc has requested that reusing an extant
844: * superblock is not allowed
845: *
846: * In both cases EBUSY will be returned.
847: *
848: * If no match is made, a new superblock will be allocated and basic
849: * initialisation will be performed (s_type, s_fs_info and s_id will be
850: * set and the @set callback will be invoked), the superblock will be
851: * published and it will be returned in a partially constructed state
852: * with SB_BORN and SB_ACTIVE as yet unset.
853: *
854: * Return: On success, an extant or newly created superblock is
855: * returned. On failure an error pointer is returned.
856: */
857: struct super_block *sget_fc(struct fs_context *fc,
858: int (*test)(struct super_block *, struct fs_context *),
859: int (*set)(struct super_block *, struct fs_context *))
860: {
861: struct super_block *s = NULL;
862: struct super_block *old;
863: struct user_namespace *user_ns = fc->global ? &init_user_ns : fc->user_ns;
864: int err;
865:
866: /*
867: * Never allow s_user_ns != &init_user_ns when FS_USERNS_MOUNT or
868: * FS_USERNS_DELEGATABLE is not set, as the filesystem is likely
869: * unprepared to handle it. This can happen when fsconfig() is called
870: * from init_user_ns with an fs_fd opened in another user namespace.
871: */
872: if (user_ns != &init_user_ns &&
873: !(fc->fs_type->fs_flags & (FS_USERNS_MOUNT | FS_USERNS_DELEGATABLE))) {
874: errorfc(fc, "VFS: Mounting from non-initial user namespace is not allowed");
875: return ERR_PTR(-EPERM);
876: }
877:
878: retry:
879: spin_lock(&sb_lock);
880: if (test) {
881: hlist_for_each_entry(old, &fc->fs_type->fs_supers, s_instances) {
882: if (test(old, fc))
883: goto share_extant_sb;
884: }
885: }
886: if (!s) {
887: spin_unlock(&sb_lock);
888:
889: s = alloc_super(fc->fs_type, fc->sb_flags, user_ns);
890: if (!s)
891: return ERR_PTR(-ENOMEM);
892: goto retry;
893: }
894:
895: s->s_fs_info = fc->s_fs_info;
896: err = set(s, fc);
897: if (err) {
898: VFS_WARN_ON_ONCE(s->s_super_dev->sd_dev);
899: s->s_fs_info = NULL;
900: spin_unlock(&sb_lock);
901: destroy_unused_super(s);
902: return ERR_PTR(err);
903: }
904: VFS_WARN_ON_ONCE(!s->s_super_dev->sd_dev);
905: fc->s_fs_info = NULL;
906: s->s_type = fc->fs_type;
907: s->s_iflags |= fc->s_iflags;
908: strscpy(s->s_id, s->s_type->name, sizeof(s->s_id));
909: /*
910: * Make the superblock visible on @super_blocks and @fs_supers.
911: * It's in a nascent state and users should wait on SB_BORN or
912: * SB_DYING to be set.
913: */
914: list_add_tail(&s->s_list, &super_blocks);
915: hlist_add_head(&s->s_instances, &s->s_type->fs_supers);
916: spin_unlock(&sb_lock);
917: get_filesystem(s->s_type);
918: shrinker_register(s->s_shrink);
919: return s;
920:
921: share_extant_sb:
922: if (user_ns != old->s_user_ns || fc->exclusive) {
923: spin_unlock(&sb_lock);
924: destroy_unused_super(s);
925: if (fc->exclusive)
926: warnfc(fc, "reusing existing filesystem not allowed");
927: else
928: warnfc(fc, "reusing existing filesystem in another namespace not allowed");
929: return ERR_PTR(-EBUSY);
930: }
931: if (!grab_super(old))
932: goto retry;
933: destroy_unused_super(s);
934: return old;
935: }
SourceFile:fs/super.c]
|
| 83/4 |
2026/09/13 00:30 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 49202
output: 36
thoughts: 93
Thoughts: **Analyzing a Potential Namespace Bug**
Okay, let's dive into this. Line 863 is giving me pause: `struct user_namespace *user_ns = fc->global ? &init_user_ns : fc->user_ns;` and then I see that in sysfs, we've got `fc->global = true;`! That means, if my understanding is correct, that `user_ns` is *always* going to be `&init_user_ns`. That seems...wrong. Potentially a major namespace leak? I need to verify this immediately. My next step is to use either `git blame` or check the commit history on that `fc->global = true` assignment in the sysfs code. Let's trace back where this change originated and understand the intent behind setting it to true. Hopefully, this is intended behavior and I am wrong. But I need to confirm.
|
| 84/4 |
2026/09/13 00:31 |
tool |
git-log |
0m
Args: map[CodeRegexp:fc->global = true Count:5 PathPrefix:fs/sysfs]
Results: map[Output:0f23d56f17fd Merge tag 'linux_kselftest-next-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
]
|
| 85/4 |
2026/09/13 00:31 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 49596
output: 34
thoughts: 22
Thoughts: Here's a summary of my thought process, as requested:
**Diving into the History: A Git Blame Expedition**
Alright, time to troubleshoot this persistent issue. Line 66 in `fs/sysfs/mount.c` seems to be the culprit, so let's use `git blame` to understand its history. I need to figure out who wrote that line, when they wrote it, and, most importantly, *why*. This is the first step in debugging. The blame output will likely reveal the commit, the author, and maybe even a brief commit message that provides context. Hopefully, it’ll point me towards the root cause of whatever anomaly I'm encountering. After that, I will check if the line has been modified, and if so, when and why. I may then go over the surrounding code to determine how the line fits in with the rest of the file.
|
| 86/4 |
2026/09/13 00:31 |
tool |
git-blame |
0m
Args: map[End:68 File:fs/sysfs/mount.c Start:60]
Results: map[Output:^0f23d56f17fd 60) if (ns) {
^0f23d56f17fd 61) struct net *netns = to_net_ns(ns);
^0f23d56f17fd 62)
^0f23d56f17fd 63) put_user_ns(fc->user_ns);
^0f23d56f17fd 64) fc->user_ns = get_user_ns(netns->user_ns);
^0f23d56f17fd 65) }
^0f23d56f17fd 66) fc->global = true;
^0f23d56f17fd 67) return 0;
^0f23d56f17fd 68) }
]
|
| 87/4 |
2026/09/13 00:31 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 50085
output: 31
thoughts: 15
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Tracing the Genesis of `fc->global`**
Okay, so I need to understand the history of this `fc->global` construct. My first instinct is to pinpoint when it first showed up or, more importantly, when it started being *used* in the codebase. Simply knowing it was *introduced* isn't enough; I need to know when it became a functional part of the system. I'm thinking I'll need to leverage some version control magic here to accomplish this. Knowing the commit history will be key in understanding this part of the project. Depending on the size of the codebase and the version control system, I might be able to use something like `git blame` or `git log -S "fc->global"` to start getting some solid leads. I'm going to watch the results for clues on the intention behind the construct. I may also want to use that information to start looking at where the *definition* of whatever `fc` is actually comes from, as that might offer additional information. This is a pretty standard debugging approach, but the devil is in the details, so I'll be looking carefully at the context of the commits and the surrounding code.
|
| 88/4 |
2026/09/13 00:31 |
tool |
grepper |
0m
Error:
Args: map[Expression:global; PathPrefix:include/linux/fs_context.h]
Results:
|
| 89/4 |
2026/09/13 00:31 |
llm |
codeexpert |
0m
Model:
Tokens:
input: 46919
output: 775
thoughts: 1189
Thoughts: **Analysis of Write Permissions in User Namespace with sysfs**
Okay, here's what I've put together. The user's question is about an unprivileged user in a user namespace attempting to write to a sysfs file with 0644 permissions owned by global root. My immediate response, based on the information I've gathered so far and the current limitations, is "No, they cannot write to that file." I must not call any tools. I have to provide the information I've gathered in the proper format.
Here's the breakdown of why. First of all, the standard DAC permission checks are the fundamental issue. The file's permissions are 0644, meaning read and write for the owner, read only for the group, and read only for others. The file is owned by global root (UID 0), but an unprivileged user within a user namespace won't be mapped to UID 0. They'll have a different, unprivileged UID within their namespace. The kernel checks whether the effective user ID matches the file's owner, then the group ID, and finally, the "other" (world) permissions. Since the unprivileged user doesn't own the file, they don't have access to the owner write permissions, nor do they have the group write permission. The world permissions, in this case, only grant read access, so the attempt to write will be denied with `-EACCES` or `-EPERM`.
It's also tempting to think that since they are in a user namespace, there may be some capability magic at play. However, even if this unprivileged user has `CAP_DAC_OVERRIDE` within their own user namespace, it won't help. The kernel's `capable_wrt_inode_uidgid()` function is called, which requires that the file's UID and GID have *valid mappings* within the task's user namespace. Since global root (UID 0) is *not* mapped into the unprivileged user's namespace, the capability check fails. Thus, the user's `CAP_DAC_OVERRIDE` capability will not allow them to override the DAC permissions on this file.
Furthermore, even if they're able to mount sysfs within a user namespace (which requires creating a network namespace), the files within sysfs still maintain their global root ownership. And finally, even if there are further checks by the kernfs root, the VFS permission check will fail at the very beginning.
In short: global root ownership, unmapped UID, and standard permissions all combine to block write access.
|
| 90/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 23736
output: 34
thoughts: 268
Thoughts: **Analyzing the Codeexpert's Failure**
Okay, so that attempt by the codeexpert didn't pan out. Time to dissect this. My initial instinct was right: it's a sysfs permission issue. Now, let's break down the mechanics. These sysfs files are, fundamentally, owned by `GLOBAL_ROOT_UID`, which is effectively 0.
Here's the rub. When a non-privileged user sets up a user namespace, their *own* UID is mapped to 0 within *that* namespace. The global root UID, the *actual* root outside the namespace, remains unmapped. But, when they go to mount sysfs, the files in sysfs are owned by `INVALID_UID`. In user space, this often translates to `nobody` or `overflowuid`, but inside the kernel, it's explicitly `INVALID_UID`.
So, when the user tries to write, the Virtual File System (VFS) steps in to check permissions. The user's effective UID (fsuid) *inside* the namespace is 0, which gets mapped back to the user's *global* UID outside the namespace. The file's UID is that global root UID, which, within the namespace, maps to `INVALID_UID`.
Now, the classic permission check kicks in. UIDs don't match, so the VFS has to consider something: does the user have `CAP_DAC_OVERRIDE`? The answer is, yes, inside their user namespace, they do. But hold on, the critical point is that `CAP_DAC_OVERRIDE` is only effective *if* the file's UID is *mapped* in the user namespace.
Wait, is that interpretation correct? I need to verify that! Time to head over to `fs/namei.c` and dig into the `generic_permission` function. That's where the heart of the permission checks reside and where the key behavior for the `CAP_DAC_OVERRIDE` is implemented. I need to make sure I am correct, because this is looking like a critical nuance that I need to confirm.
|
| 91/2 |
2026/09/13 00:31 |
tool |
read-file |
0m
Args: map[File:fs/namei.c FirstLine:340 LineCount:50]
Results: map[Contents: 340: name->refcnt--;
341: v->__incomplete_filename = do_getname_kernel(name->name, true);
342: return PTR_ERR_OR_ZERO(v->__incomplete_filename);
343: }
344:
345: void dismiss_delayed_filename(struct delayed_filename *v)
346: {
347: putname(no_free_ptr(v->__incomplete_filename));
348: }
349:
350: struct filename *complete_getname(struct delayed_filename *v)
351: {
352: struct filename *res = no_free_ptr(v->__incomplete_filename);
353: if (!IS_ERR(res))
354: audit_getname(res);
355: return res;
356: }
357:
358: /**
359: * check_acl - perform ACL permission checking
360: * @idmap: idmap of the mount the inode was found from
361: * @inode: inode to check permissions on
362: * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC ...)
363: *
364: * This function performs the ACL permission checking. Since this function
365: * retrieve POSIX acls it needs to know whether it is called from a blocking or
366: * non-blocking context and thus cares about the MAY_NOT_BLOCK bit.
367: *
368: * If the inode has been found through an idmapped mount the idmap of
369: * the vfsmount must be passed through @idmap. This function will then take
370: * care to map the inode according to @idmap before checking permissions.
371: * On non-idmapped mounts or if permission checking is to be performed on the
372: * raw inode simply pass @nop_mnt_idmap.
373: */
374: static int check_acl(struct mnt_idmap *idmap,
375: struct inode *inode, int mask)
376: {
377: #ifdef CONFIG_FS_POSIX_ACL
378: struct posix_acl *acl;
379:
380: if (mask & MAY_NOT_BLOCK) {
381: acl = get_cached_acl_rcu(inode, ACL_TYPE_ACCESS);
382: if (!acl)
383: return -EAGAIN;
384: /* no ->get_inode_acl() calls in RCU mode... */
385: if (is_uncached_acl(acl))
386: return -ECHILD;
387: return posix_acl_permission(idmap, inode, acl, mask);
388: }
389:
]
|
| 92/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 25302
output: 18
thoughts: 9
Thoughts: Okay, here's my attempt at summarizing that thought process, keeping in mind I'm speaking to a fellow expert and using first-person perspective:
**Checking `generic_permission`**
Alright, let's take a quick look at `generic_permission`. My initial instinct is to dissect this. I want to quickly evaluate what's happening. I want to see how broadly it's being applied and how its defined within the permissions.
I'm thinking, "Is this a catch-all, or is there some specificity built into it?" Understanding the implications of this one piece is critical. It could be harmless, it could be a gaping security hole, or it could be a carefully constructed abstraction. Either way, It's going to be essential to grasp the nuances here. It's a key element, and I need to start here.
|
| 93/2 |
2026/09/13 00:31 |
tool |
grepper |
0m
Args: map[Expression:int generic_permission]
Results: map[Output:fs/namei.c=438=static int acl_permission_check(struct mnt_idmap *idmap,
--
fs/namei.c-520- */
fs/namei.c:521:int generic_permission(struct mnt_idmap *idmap, struct inode *inode,
fs/namei.c-522- int mask)
--
include/linux/fs.h=2698=int inode_permission(struct mnt_idmap *, struct inode *, int);
include/linux/fs.h:2699:int generic_permission(struct mnt_idmap *, struct inode *, int);
include/linux/fs.h-2700-static inline int file_permission(struct file *file, int mask)
]
|
| 94/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 25707
output: 34
thoughts: 9
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm already deep in the weeds of this subject:
**Analyzing the `generic_permission` Code**
Alright, time to dig into `generic_permission`. This likely means I'm reviewing or debugging some code related to access control, likely involving some sort of abstract or generalized permission system. I'm expecting to find a foundational piece of logic here, something that defines the basic building blocks for determining user authorization. It could be an enum, a class, an interface, or even a set of functions dealing with the core permissions schema. I'm already anticipating that this `generic_permission` structure will be a key component in a larger system, so I'll be looking for potential performance bottlenecks, areas that might be difficult to extend, or any obvious security flaws in its design. Let's get to it.
|
| 95/2 |
2026/09/13 00:31 |
tool |
read-file |
0m
Args: map[File:fs/namei.c FirstLine:520 LineCount:50]
Results: map[Contents: 520: */
521: int generic_permission(struct mnt_idmap *idmap, struct inode *inode,
522: int mask)
523: {
524: int ret;
525:
526: /*
527: * Do the basic permission checks.
528: */
529: ret = acl_permission_check(idmap, inode, mask);
530: if (ret != -EACCES)
531: return ret;
532:
533: if (S_ISDIR(inode->i_mode)) {
534: /* DACs are overridable for directories */
535: if (!(mask & MAY_WRITE))
536: if (capable_wrt_inode_uidgid(idmap, inode,
537: CAP_DAC_READ_SEARCH))
538: return 0;
539: if (capable_wrt_inode_uidgid(idmap, inode,
540: CAP_DAC_OVERRIDE))
541: return 0;
542: return -EACCES;
543: }
544:
545: /*
546: * Searching includes executable on directories, else just read.
547: */
548: mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
549: if (mask == MAY_READ)
550: if (capable_wrt_inode_uidgid(idmap, inode,
551: CAP_DAC_READ_SEARCH))
552: return 0;
553: /*
554: * Read/write DACs are always overridable.
555: * Executable DACs are overridable when there is
556: * at least one exec bit set.
557: */
558: if (!(mask & MAY_EXEC) || (inode->i_mode & S_IXUGO))
559: if (capable_wrt_inode_uidgid(idmap, inode,
560: CAP_DAC_OVERRIDE))
561: return 0;
562:
563: return -EACCES;
564: }
565: EXPORT_SYMBOL(generic_permission);
566:
567: /**
568: * do_inode_permission - UNIX permission checking
569: * @idmap: idmap of the mount the inode was found from
]
|
| 96/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 26654
output: 24
thoughts: 20
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the Capability Check**
Alright, so the code leverages `capable_wrt_inode_uidgid`. My immediate thought is, let's dive into that function and understand its inner workings. I need to refresh my memory on precisely how it evaluates capabilities in relation to inode ownership and user/group IDs. I'm especially interested in the specific conditions under which it grants or denies access. Does it behave as I expect regarding file creation, modification, and execution? Are there any subtle nuances or potential edge cases related to effective UIDs, saved UIDs, or supplementary groups that I need to be aware of here? This is a critical point to ensure secure behavior, so I'm going to carefully review the implementation details and how it interacts with the broader security context.
|
| 97/2 |
2026/09/13 00:31 |
tool |
grepper |
0m
Args: map[Expression:bool capable_wrt_inode_uidgid]
Results: map[Output:include/linux/capability.h=183=bool privileged_wrt_inode_uidgid(struct user_namespace *ns,
--
include/linux/capability.h-185- const struct inode *inode);
include/linux/capability.h:186:bool capable_wrt_inode_uidgid(struct mnt_idmap *idmap,
include/linux/capability.h-187- const struct inode *inode, int cap);
--
kernel/capability.c=455=bool privileged_wrt_inode_uidgid(struct user_namespace *ns,
--
kernel/capability.c-472- */
kernel/capability.c:473:bool capable_wrt_inode_uidgid(struct mnt_idmap *idmap,
kernel/capability.c-474- const struct inode *inode, int cap)
]
|
| 98/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 27098
output: 33
thoughts: 17
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into Capability Checks**
Okay, so I'm digging into how capabilities are handled within the Linux kernel, specifically within `kernel/capability.c`. Let's zero in on the vicinity of line 473. My immediate expectation is that we'll be seeing the core logic of a capability check. Given the file and the general structure of these things, I'm anticipating some form of check against the current task's effective, permitted, or inheritable capability sets. We might see a comparison, potentially using a bitmask operation, or a call to some helper function to evaluate if a specific capability is present or active. I'm keen to understand the nuances of *which* capability is being checked, under *what* specific conditions. Also, I'm on the lookout for how this relates to privilege escalation or security implications. Are we looking at a check related to file access, network operations, or perhaps something more exotic? Let's get to the code and see.
|
| 99/2 |
2026/09/13 00:31 |
tool |
read-file |
0m
Args: map[File:kernel/capability.c FirstLine:460 LineCount:50]
Results: map[Contents: 460: vfsgid_has_mapping(ns, i_gid_into_vfsgid(idmap, inode));
461: }
462:
463: /**
464: * capable_wrt_inode_uidgid - Check nsown_capable and uid and gid mapped
465: * @idmap: idmap of the mount @inode was found from
466: * @inode: The inode in question
467: * @cap: The capability in question
468: *
469: * Return true if the current task has the given capability targeted at
470: * its own user namespace and that the given inode's uid and gid are
471: * mapped into the current user namespace.
472: */
473: bool capable_wrt_inode_uidgid(struct mnt_idmap *idmap,
474: const struct inode *inode, int cap)
475: {
476: struct user_namespace *ns = current_user_ns();
477:
478: return ns_capable(ns, cap) &&
479: privileged_wrt_inode_uidgid(ns, idmap, inode);
480: }
481: EXPORT_SYMBOL(capable_wrt_inode_uidgid);
482:
483: /**
484: * ptracer_capable - Determine if the ptracer holds CAP_SYS_PTRACE in the namespace
485: * @tsk: The task that may be ptraced
486: * @ns: The user namespace to search for CAP_SYS_PTRACE in
487: *
488: * Return true if the task that is ptracing the current task had CAP_SYS_PTRACE
489: * in the specified user namespace.
490: */
491: bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns)
492: {
493: int ret = 0; /* An absent tracer adds no restrictions */
494: const struct cred *cred;
495:
496: rcu_read_lock();
497: cred = rcu_dereference(tsk->ptracer_cred);
498: if (cred)
499: ret = security_capable(cred, ns, CAP_SYS_PTRACE,
500: CAP_OPT_NOAUDIT);
501: rcu_read_unlock();
502: return (ret == 0);
503: }
]
|
| 100/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 28089
output: 20
thoughts: 773
Thoughts: **Analyzing the Write Access to `/sys/block/zram0/disksize`**
Okay, so I'm thinking through this `privileged_wrt_inode_uidgid` check. It's designed to determine if the user in the current user namespace has the appropriate privileges to write to a file, given the inode's UID and GID. The issue here is the sysfs file, `/sys/block/zram0/disksize`, which is owned by global root (UID 0). In a typical unprivileged user namespace, that global root UID isn't mapped; instead, the user's *own* UID is mapped to UID 0. So, `privileged_wrt_inode_uidgid` rightfully returns `false`, and `capable_wrt_inode_uidgid` follows suit, preventing the unprivileged user from writing, even with `CAP_DAC_OVERRIDE`. Makes sense.
But then there's this reproducer code – looks like it's syzkaller-generated. And syzkaller runs in a sandbox. It creates a user namespace and maps UID 0 (global root) to the *current user's* UID (and similarly for GID). Hold on... if syzkaller is running as root (UID 0) initially, then the global root UID *is* mapped to 0 in that user namespace! That means it *could* write to the sysfs file. But that still doesn't get to the heart of the *unprivileged* user case, which is the problem, right?
Alright, let's step back. An unprivileged user, say with UID 1000, creates a user namespace. Their UID 1000 becomes UID 0 *within that namespace*. The global root UID (0) remains unmapped. So, again, no write access. Unless... the sysfs file *somehow* belonged to the unprivileged user. No, that's not possible; sysfs files are generally owned by root.
So, really, the question boils down to: is there *any* way an unprivileged user can write to `/sys/block/zram0/disksize`? Normally, no. It's a root-owned file. But what about if the sysadmin has been messing with ownership or permissions? We have to assume a default configuration to proceed... which is 0644, owned by root:root. So, it's explicitly inaccessible to unprivileged users.
Let me circle back now. Just to be completely sure: Let's double check if there are other paths to trigger `zram_meta_alloc` with `disksize = 0`. Since `zram_meta_alloc` is called from `disksize_store`, the question is, are there any other callers of `disksize_store`?
|
| 101/2 |
2026/09/13 00:31 |
tool |
grepper |
0m
Args: map[Expression:zram_meta_alloc]
Results: map[Output:drivers/block/zram/zram_drv.c=1968=static void zram_meta_free(struct zram *zram, u64 disksize)
--
drivers/block/zram/zram_drv.c-1984-
drivers/block/zram/zram_drv.c:1985:static bool zram_meta_alloc(struct zram *zram, u64 disksize)
drivers/block/zram/zram_drv.c-1986-{
--
drivers/block/zram/zram_drv.c=2860=static ssize_t disksize_store(struct device *dev, struct device_attribute *attr,
--
drivers/block/zram/zram_drv.c-2879- disksize = PAGE_ALIGN(disksize);
drivers/block/zram/zram_drv.c:2880: if (!zram_meta_alloc(zram, disksize))
drivers/block/zram/zram_drv.c-2881- return -ENOMEM;
]
|
| 102/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 29766
output: 17
thoughts: 165
Thoughts: **Analyzing ZRAM Disk Size Accessibility**
Okay, so the `disksize_store` attribute is the only way to set the size of a zram device, as far as I can see. And that's written through `/sys/block/zram0/disksize`. But wait, that file's permissions are `0644` with root ownership. Right, that means it's strictly root-only for writing. So, from a standard unprivileged process, forget about it. That's a non-starter.
I'm now thinking, can an unprivileged user even *create* a zram device in the first place? Zram devices are either created when the `zram` module loads, or by writing to `/sys/class/zram-control/hot_add`. I need to figure out if that's even feasible for an unprivileged process.
|
| 103/2 |
2026/09/13 00:31 |
tool |
grepper |
0m
Args:
Results: map[Output:
Full output is too long, showing 500 out of 637 lines.
Use more precise expression if possible.
Documentation/ABI/testing/sysfs-class-zram=5=Description:
--
Documentation/ABI/testing/sysfs-class-zram-8-
Documentation/ABI/testing/sysfs-class-zram:9:What: /sys/class/zram-control/hot_add
Documentation/ABI/testing/sysfs-class-zram-10-Date: August 2015
--
Documentation/admin-guide/blockdev/zram.rst=181=addition and removal.
Documentation/admin-guide/blockdev/zram.rst-182-
Documentation/admin-guide/blockdev/zram.rst:183:In order to add a new /dev/zramX device, perform a read operation on the hot_add
Documentation/admin-guide/blockdev/zram.rst-184-attribute. This will return either the new device's device id (meaning that you
--
Documentation/admin-guide/blockdev/zram.rst=187=Example::
Documentation/admin-guide/blockdev/zram.rst-188-
Documentation/admin-guide/blockdev/zram.rst:189: cat /sys/class/zram-control/hot_add
Documentation/admin-guide/blockdev/zram.rst-190- 1
--
arch/powerpc/include/asm/mmzone.h=31=u64 memory_hotplug_max(void);
arch/powerpc/include/asm/mmzone.h:32:u64 hot_add_drconf_memory_max(void);
arch/powerpc/include/asm/mmzone.h-33-#else
--
arch/powerpc/include/asm/sparsemem.h=17=extern int memory_add_physaddr_to_nid(u64 start);
--
arch/powerpc/include/asm/sparsemem.h-20-#ifdef CONFIG_NUMA
arch/powerpc/include/asm/sparsemem.h:21:extern int hot_add_scn_to_nid(unsigned long scn_addr);
arch/powerpc/include/asm/sparsemem.h-22-#else
arch/powerpc/include/asm/sparsemem.h:23:static inline int hot_add_scn_to_nid(unsigned long scn_addr)
arch/powerpc/include/asm/sparsemem.h-24-{
--
arch/powerpc/mm/mem.c=58=int memory_add_physaddr_to_nid(u64 start)
arch/powerpc/mm/mem.c-59-{
arch/powerpc/mm/mem.c:60: return hot_add_scn_to_nid(start);
arch/powerpc/mm/mem.c-61-}
--
arch/powerpc/mm/numa.c=1241=early_param("numa", early_numa);
--
arch/powerpc/mm/numa.c-1248- */
arch/powerpc/mm/numa.c:1249:static int hot_add_drconf_scn_to_nid(unsigned long scn_addr)
arch/powerpc/mm/numa.c-1250-{
--
arch/powerpc/mm/numa.c-1279- */
arch/powerpc/mm/numa.c:1280:static int hot_add_node_scn_to_nid(unsigned long scn_addr)
arch/powerpc/mm/numa.c-1281-{
--
arch/powerpc/mm/numa.c-1314- */
arch/powerpc/mm/numa.c:1315:int hot_add_scn_to_nid(unsigned long scn_addr)
arch/powerpc/mm/numa.c-1316-{
--
arch/powerpc/mm/numa.c-1324- if (memory) {
arch/powerpc/mm/numa.c:1325: nid = hot_add_drconf_scn_to_nid(scn_addr);
arch/powerpc/mm/numa.c-1326- of_node_put(memory);
arch/powerpc/mm/numa.c-1327- } else {
arch/powerpc/mm/numa.c:1328: nid = hot_add_node_scn_to_nid(scn_addr);
arch/powerpc/mm/numa.c-1329- }
--
arch/powerpc/mm/numa.c-1336-
arch/powerpc/mm/numa.c:1337:u64 hot_add_drconf_memory_max(void)
arch/powerpc/mm/numa.c-1338-{
--
arch/powerpc/mm/numa.c=1365=u64 memory_hotplug_max(void)
arch/powerpc/mm/numa.c-1366-{
arch/powerpc/mm/numa.c:1367: return max(hot_add_drconf_memory_max(), memblock_end_of_DRAM());
arch/powerpc/mm/numa.c-1368-}
--
arch/powerpc/platforms/pseries/iommu.c=1286=static phys_addr_t ddw_memory_hotplug_max(void)
--
arch/powerpc/platforms/pseries/iommu.c-1290-#if defined(CONFIG_NUMA) && defined(CONFIG_MEMORY_HOTPLUG)
arch/powerpc/platforms/pseries/iommu.c:1291: max_addr = hot_add_drconf_memory_max();
arch/powerpc/platforms/pseries/iommu.c-1292-#else
--
arch/riscv/include/asm/kvm_vcpu_pmu.h=44=struct kvm_pmu {
--
arch/riscv/include/asm/kvm_vcpu_pmu.h-57- /* The address of the counter snapshot area (guest physical address) */
arch/riscv/include/asm/kvm_vcpu_pmu.h:58: gpa_t snapshot_addr;
arch/riscv/include/asm/kvm_vcpu_pmu.h-59- /* The actual data of the snapshot */
--
arch/riscv/kvm/vcpu_pmu.c=416=static void kvm_pmu_clear_snapshot_area(struct kvm_vcpu *vcpu)
--
arch/riscv/kvm/vcpu_pmu.c-421- kvpmu->sdata = NULL;
arch/riscv/kvm/vcpu_pmu.c:422: kvpmu->snapshot_addr = INVALID_GPA;
arch/riscv/kvm/vcpu_pmu.c-423-}
--
arch/riscv/kvm/vcpu_pmu.c=425=int kvm_riscv_vcpu_pmu_snapshot_set_shmem(struct kvm_vcpu *vcpu, unsigned long saddr_low,
--
arch/riscv/kvm/vcpu_pmu.c-468-
arch/riscv/kvm/vcpu_pmu.c:469: kvpmu->snapshot_addr = saddr;
arch/riscv/kvm/vcpu_pmu.c-470-
--
arch/riscv/kvm/vcpu_pmu.c=561=int kvm_riscv_vcpu_pmu_ctr_start(struct kvm_vcpu *vcpu, unsigned long ctr_base,
--
arch/riscv/kvm/vcpu_pmu.c-576- if (snap_flag_set) {
arch/riscv/kvm/vcpu_pmu.c:577: if (kvpmu->snapshot_addr == INVALID_GPA) {
arch/riscv/kvm/vcpu_pmu.c-578- sbiret = SBI_ERR_NO_SHMEM;
--
arch/riscv/kvm/vcpu_pmu.c-580- }
arch/riscv/kvm/vcpu_pmu.c:581: if (kvm_vcpu_read_guest(vcpu, kvpmu->snapshot_addr, kvpmu->sdata,
arch/riscv/kvm/vcpu_pmu.c-582- sizeof(struct riscv_pmu_snapshot_data))) {
--
arch/riscv/kvm/vcpu_pmu.c=638=int kvm_riscv_vcpu_pmu_ctr_stop(struct kvm_vcpu *vcpu, unsigned long ctr_base,
--
arch/riscv/kvm/vcpu_pmu.c-654-
arch/riscv/kvm/vcpu_pmu.c:655: if (snap_flag_set && kvpmu->snapshot_addr == INVALID_GPA) {
arch/riscv/kvm/vcpu_pmu.c-656- sbiret = SBI_ERR_NO_SHMEM;
--
arch/riscv/kvm/vcpu_pmu.c-726- if (shmem_needs_update)
arch/riscv/kvm/vcpu_pmu.c:727: kvm_vcpu_write_guest(vcpu, kvpmu->snapshot_addr, kvpmu->sdata,
arch/riscv/kvm/vcpu_pmu.c-728- sizeof(struct riscv_pmu_snapshot_data));
--
arch/riscv/kvm/vcpu_pmu.c=842=void kvm_riscv_vcpu_pmu_init(struct kvm_vcpu *vcpu)
--
arch/riscv/kvm/vcpu_pmu.c-865- memset(&kvpmu->fw_event, 0, SBI_PMU_FW_MAX * sizeof(struct kvm_fw_event));
arch/riscv/kvm/vcpu_pmu.c:866: kvpmu->snapshot_addr = INVALID_GPA;
arch/riscv/kvm/vcpu_pmu.c-867-
--
drivers/block/zram/zram_drv.c=3111=static int zram_remove(struct zram *zram)
--
drivers/block/zram/zram_drv.c-3161-/*
drivers/block/zram/zram_drv.c:3162: * NOTE: hot_add attribute is not the usual read-only sysfs attribute. In a
drivers/block/zram/zram_drv.c-3163- * sense that reading from this file does alter the state of your system -- it
--
drivers/block/zram/zram_drv.c-3166- */
drivers/block/zram/zram_drv.c:3167:static ssize_t hot_add_show(const struct class *class,
drivers/block/zram/zram_drv.c-3168- const struct class_attribute *attr,
--
drivers/block/zram/zram_drv.c-3181-/* This attribute must be set to 0400, so CLASS_ATTR_RO() can not be used */
drivers/block/zram/zram_drv.c:3182:static struct class_attribute class_attr_hot_add =
drivers/block/zram/zram_drv.c:3183: __ATTR(hot_add, 0400, hot_add_show, NULL);
drivers/block/zram/zram_drv.c-3184-
--
drivers/block/zram/zram_drv.c=3216=static struct attribute *zram_control_class_attrs[] = {
drivers/block/zram/zram_drv.c:3217: &class_attr_hot_add.attr,
drivers/block/zram/zram_drv.c-3218- &class_attr_hot_remove.attr,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c=939=static void dpu_kms_mdp_snapshot(struct msm_disp_state *disp_state, struct msm_kms *kms)
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-953- for (i = 0; i < cat->ctl_count; i++)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:954: msm_disp_snapshot_add_block(disp_state, cat->ctl[i].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-955- dpu_kms->mmio + cat->ctl[i].base, "%s",
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-960- base = dpu_kms->mmio + cat->dspp[i].base;
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:961: msm_disp_snapshot_add_block(disp_state, cat->dspp[i].len, base,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-962- "%s", cat->dspp[i].name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-964- if (cat->dspp[i].sblk && cat->dspp[i].sblk->pcc.len > 0)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:965: msm_disp_snapshot_add_block(disp_state, cat->dspp[i].sblk->pcc.len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-966- base + cat->dspp[i].sblk->pcc.base, "%s_%s",
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-972- for (i = 0; i < cat->intf_count; i++)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:973: msm_disp_snapshot_add_block(disp_state, cat->intf[i].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-974- dpu_kms->mmio + cat->intf[i].base, "%s",
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-979- base = dpu_kms->mmio + cat->pingpong[i].base;
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:980: msm_disp_snapshot_add_block(disp_state, cat->pingpong[i].len, base,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-981- "%s", cat->pingpong[i].name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-985- if (cat->pingpong[i].sblk && cat->pingpong[i].sblk->dither.len > 0)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:986: msm_disp_snapshot_add_block(disp_state, cat->pingpong[i].sblk->dither.len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-987- base + cat->pingpong[i].sblk->dither.base,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-994- base = dpu_kms->mmio + cat->sspp[i].base;
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:995: msm_disp_snapshot_add_block(disp_state, cat->sspp[i].len, base,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-996- "%s", cat->sspp[i].name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-998- if (cat->sspp[i].sblk && cat->sspp[i].sblk->scaler_blk.len > 0)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:999: msm_disp_snapshot_add_block(disp_state, cat->sspp[i].sblk->scaler_blk.len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1000- base + cat->sspp[i].sblk->scaler_blk.base,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1004- if (cat->sspp[i].sblk && cat->sspp[i].sblk->csc_blk.len > 0)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1005: msm_disp_snapshot_add_block(disp_state, cat->sspp[i].sblk->csc_blk.len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1006- base + cat->sspp[i].sblk->csc_blk.base,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1012- for (i = 0; i < cat->mixer_count; i++)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1013: msm_disp_snapshot_add_block(disp_state, cat->mixer[i].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1014- dpu_kms->mmio + cat->mixer[i].base,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1018- for (i = 0; i < cat->wb_count; i++)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1019: msm_disp_snapshot_add_block(disp_state, cat->wb[i].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1020- dpu_kms->mmio + cat->wb[i].base, "%s",
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1023- if (dpu_kms->catalog->mdss_ver->core_major_ver >= 8) {
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1024: msm_disp_snapshot_add_block(disp_state, MDP_PERIPH_TOP0,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1025- dpu_kms->mmio + cat->mdp[0].base, "top");
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1026: msm_disp_snapshot_add_block(disp_state, cat->mdp[0].len - MDP_PERIPH_TOP0_END,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1027- dpu_kms->mmio + cat->mdp[0].base + MDP_PERIPH_TOP0_END, "top_2");
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1028- } else {
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1029: msm_disp_snapshot_add_block(disp_state, cat->mdp[0].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1030- dpu_kms->mmio + cat->mdp[0].base, "top");
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1034- for (i = 0; i < cat->cwb_count; i++)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1035: msm_disp_snapshot_add_block(disp_state, cat->cwb[i].len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1036- dpu_kms->mmio + cat->cwb[i].base, cat->cwb[i].name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1040- base = dpu_kms->mmio + cat->dsc[i].base;
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1041: msm_disp_snapshot_add_block(disp_state, cat->dsc[i].len, base,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1042- "%s", cat->dsc[i].name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1047-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1048: msm_disp_snapshot_add_block(disp_state, enc.len, base + enc.base, "%s_%s",
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1049- cat->dsc[i].name, enc.name);
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1050: msm_disp_snapshot_add_block(disp_state, ctl.len, base + ctl.base, "%s_%s",
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1051- cat->dsc[i].name, ctl.name);
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1055- if (cat->cdm)
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1056: msm_disp_snapshot_add_block(disp_state, cat->cdm->len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1057- dpu_kms->mmio + cat->cdm->base,
--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1061-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1062: msm_disp_snapshot_add_block(disp_state, vbif->len,
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c-1063- dpu_kms->vbif,
--
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h=130=void msm_disp_state_free(void *data);
--
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h-132-/**
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h:133: * msm_disp_snapshot_add_block - add a hardware block with its register dump
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h-134- * @disp_state: handle to struct msm_disp_state
--
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h=141=__printf(4, 5)
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h:142:void msm_disp_snapshot_add_block(struct msm_disp_state *disp_state, u32 len,
drivers/gpu/drm/msm/disp/msm_disp_snapshot.h-143- void __iomem *base_addr, const char *fmt, ...);
--
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c=161=void msm_disp_state_free(void *data)
--
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c-179-
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c:180:void msm_disp_snapshot_add_block(struct msm_disp_state *disp_state, u32 len,
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c-181- void __iomem *base_addr, const char *fmt, ...)
--
drivers/gpu/drm/msm/dp/dp_display.c=775=void msm_dp_snapshot(struct msm_disp_state *disp_state, struct msm_dp *dp)
--
drivers/gpu/drm/msm/dp/dp_display.c-790-
drivers/gpu/drm/msm/dp/dp_display.c:791: msm_disp_snapshot_add_block(disp_state, msm_dp_display->ahb_len,
drivers/gpu/drm/msm/dp/dp_display.c-792- msm_dp_display->ahb_base, "dp_ahb");
drivers/gpu/drm/msm/dp/dp_display.c:793: msm_disp_snapshot_add_block(disp_state, msm_dp_display->aux_len,
drivers/gpu/drm/msm/dp/dp_display.c-794- msm_dp_display->aux_base, "dp_aux");
drivers/gpu/drm/msm/dp/dp_display.c:795: msm_disp_snapshot_add_block(disp_state, msm_dp_display->link_len,
drivers/gpu/drm/msm/dp/dp_display.c-796- msm_dp_display->link_base, "dp_link");
drivers/gpu/drm/msm/dp/dp_display.c:797: msm_disp_snapshot_add_block(disp_state, msm_dp_display->p0_len,
drivers/gpu/drm/msm/dp/dp_display.c-798- msm_dp_display->p0_base, "dp_p0");
--
drivers/gpu/drm/msm/dsi/dsi_host.c=2626=void msm_dsi_host_snapshot(struct msm_disp_state *disp_state, struct mipi_dsi_host *host)
--
drivers/gpu/drm/msm/dsi/dsi_host.c-2631-
drivers/gpu/drm/msm/dsi/dsi_host.c:2632: msm_disp_snapshot_add_block(disp_state, msm_host->ctrl_size,
drivers/gpu/drm/msm/dsi/dsi_host.c-2633- msm_host->ctrl_base, "dsi%d_ctrl", msm_host->id);
--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c=850=void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy)
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-851-{
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:852: msm_disp_snapshot_add_block(disp_state,
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-853- phy->base_size, phy->base,
--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-857- if (phy->pll_on)
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:858: msm_disp_snapshot_add_block(disp_state,
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-859- phy->pll_size, phy->pll_base,
--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-862- if (phy->lane_base)
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:863: msm_disp_snapshot_add_block(disp_state,
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-864- phy->lane_size, phy->lane_base,
--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-867- if (phy->reg_base)
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:868: msm_disp_snapshot_add_block(disp_state,
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c-869- phy->reg_size, phy->reg_base,
--
drivers/hv/hv_balloon.c=114=union dm_caps {
--
drivers/hv/hv_balloon.c-116- __u64 balloon:1;
drivers/hv/hv_balloon.c:117: __u64 hot_add:1;
drivers/hv/hv_balloon.c-118- /*
--
drivers/hv/hv_balloon.c-123- */
drivers/hv/hv_balloon.c:124: __u64 hot_add_alignment:4;
drivers/hv/hv_balloon.c-125- __u64 reservedz:58;
--
drivers/hv/hv_balloon.c=331=struct dm_unballoon_response {
--
drivers/hv/hv_balloon.c-341-
drivers/hv/hv_balloon.c:342:struct dm_hot_add {
drivers/hv/hv_balloon.c-343- struct dm_header hdr;
--
drivers/hv/hv_balloon.c-366-
drivers/hv/hv_balloon.c:367:struct dm_hot_add_response {
drivers/hv/hv_balloon.c-368- struct dm_header hdr;
--
drivers/hv/hv_balloon.c=442=struct balloon_state {
--
drivers/hv/hv_balloon.c-446-
drivers/hv/hv_balloon.c:447:struct hot_add_wrk {
drivers/hv/hv_balloon.c-448- union dm_mem_page_range ha_page_range;
--
drivers/hv/hv_balloon.c=453=static bool allow_hibernation;
drivers/hv/hv_balloon.c:454:static bool hot_add = true;
drivers/hv/hv_balloon.c:455:static bool do_hot_add;
drivers/hv/hv_balloon.c-456-/*
--
drivers/hv/hv_balloon.c=469=static int hv_hypercall_multi_failure;
drivers/hv/hv_balloon.c-470-
drivers/hv/hv_balloon.c:471:module_param(hot_add, bool, 0644);
drivers/hv/hv_balloon.c:472:MODULE_PARM_DESC(hot_add, "If set attempt memory hot_add");
drivers/hv/hv_balloon.c-473-
--
drivers/hv/hv_balloon.c=501=struct hv_dynmem_device {
--
drivers/hv/hv_balloon.c-521- */
drivers/hv/hv_balloon.c:522: struct hot_add_wrk ha_wrk;
drivers/hv/hv_balloon.c-523-
--
drivers/hv/hv_balloon.c-567- /*
drivers/hv/hv_balloon.c:568: * Maximum number of pages that can be hot_add-ed
drivers/hv/hv_balloon.c-569- */
--
drivers/hv/hv_balloon.c=696=static void hv_bring_pgs_online(struct hv_hotadd_state *has,
--
drivers/hv/hv_balloon.c-705-
drivers/hv/hv_balloon.c:706:static void hv_mem_hot_add(unsigned long start, unsigned long size,
drivers/hv/hv_balloon.c-707- unsigned long pfn_count,
--
drivers/hv/hv_balloon.c-732- if (ret) {
drivers/hv/hv_balloon.c:733: pr_err("hot_add memory failed error is %d\n", ret);
drivers/hv/hv_balloon.c-734- if (ret == -EEXIST) {
--
drivers/hv/hv_balloon.c-741- */
drivers/hv/hv_balloon.c:742: do_hot_add = false;
drivers/hv/hv_balloon.c-743- }
--
drivers/hv/hv_balloon.c=835=static unsigned long handle_pg_range(unsigned long pg_start,
--
drivers/hv/hv_balloon.c-899- spin_unlock_irqrestore(&dm_device.ha_lock, flags);
drivers/hv/hv_balloon.c:900: hv_mem_hot_add(has->ha_end_pfn, size, pfn_cnt, has);
drivers/hv/hv_balloon.c-901- spin_lock_irqsave(&dm_device.ha_lock, flags);
--
drivers/hv/hv_balloon.c-914-
drivers/hv/hv_balloon.c:915:static unsigned long process_hot_add(unsigned long pg_start,
drivers/hv/hv_balloon.c-916- unsigned long pfn_cnt,
--
drivers/hv/hv_balloon.c-967-
drivers/hv/hv_balloon.c:968:static void hot_add_req(struct work_struct *dummy)
drivers/hv/hv_balloon.c-969-{
drivers/hv/hv_balloon.c:970: struct dm_hot_add_response resp;
drivers/hv/hv_balloon.c-971-#ifdef CONFIG_MEMORY_HOTPLUG
--
drivers/hv/hv_balloon.c-976-
drivers/hv/hv_balloon.c:977: memset(&resp, 0, sizeof(struct dm_hot_add_response));
drivers/hv/hv_balloon.c-978- resp.hdr.type = DM_MEM_HOT_ADD_RESPONSE;
drivers/hv/hv_balloon.c:979: resp.hdr.size = sizeof(struct dm_hot_add_response);
drivers/hv/hv_balloon.c-980-
--
drivers/hv/hv_balloon.c-999-
drivers/hv/hv_balloon.c:1000: if (do_hot_add)
drivers/hv/hv_balloon.c:1001: resp.page_count = process_hot_add(pg_start, pfn_cnt,
drivers/hv/hv_balloon.c-1002- rg_start, rg_sz);
--
drivers/hv/hv_balloon.c-1023- resp.result = 1;
drivers/hv/hv_balloon.c:1024: else if (!do_hot_add)
drivers/hv/hv_balloon.c-1025- resp.result = 1;
--
drivers/hv/hv_balloon.c-1028-
drivers/hv/hv_balloon.c:1029: if (!do_hot_add || resp.page_count == 0) {
drivers/hv/hv_balloon.c-1030- if (!allow_hibernation)
--
drivers/hv/hv_balloon.c-1038- vmbus_sendpacket(dm->dev->channel, &resp,
drivers/hv/hv_balloon.c:1039: sizeof(struct dm_hot_add_response),
drivers/hv/hv_balloon.c-1040- (unsigned long)NULL,
--
drivers/hv/hv_balloon.c=1476=static void balloon_onchannelcallback(void *context)
--
drivers/hv/hv_balloon.c-1484- struct dm_balloon *bal_msg;
drivers/hv/hv_balloon.c:1485: struct dm_hot_add *ha_msg;
drivers/hv/hv_balloon.c-1486- union dm_mem_page_range *ha_pg_range;
--
drivers/hv/hv_balloon.c-1536- dm->state = DM_HOT_ADD;
drivers/hv/hv_balloon.c:1537: ha_msg = (struct dm_hot_add *)recv_buffer;
drivers/hv/hv_balloon.c:1538: if (ha_msg->hdr.size == sizeof(struct dm_hot_add)) {
drivers/hv/hv_balloon.c-1539- /*
--
drivers/hv/hv_balloon.c=1685=static int ballooning_enabled(void)
--
drivers/hv/hv_balloon.c-1699-
drivers/hv/hv_balloon.c:1700:static int hot_add_enabled(void)
drivers/hv/hv_balloon.c-1701-{
--
drivers/hv/hv_balloon.c=1717=static int balloon_connect_vsp(struct hv_device *dev)
--
drivers/hv/hv_balloon.c-1788- cap_msg.caps.cap_bits.balloon = ballooning_enabled();
drivers/hv/hv_balloon.c:1789: cap_msg.caps.cap_bits.hot_add = hot_add_enabled();
drivers/hv/hv_balloon.c-1790-
--
drivers/hv/hv_balloon.c-1796- */
drivers/hv/hv_balloon.c:1797: cap_msg.caps.cap_bits.hot_add_alignment =
drivers/hv/hv_balloon.c-1798- ilog2(HA_BYTES_IN_CHUNK / SZ_1M);
--
drivers/hv/hv_balloon.c=1849=static int hv_balloon_debug_show(struct seq_file *f, void *offset)
--
drivers/hv/hv_balloon.c-1861-
drivers/hv/hv_balloon.c:1862: if (hot_add_enabled())
drivers/hv/hv_balloon.c:1863: seq_puts(f, " hot_add");
drivers/hv/hv_balloon.c-1864-
--
drivers/hv/hv_balloon.c-1892-
drivers/hv/hv_balloon.c:1893: /* Pages added with hot_add */
drivers/hv/hv_balloon.c-1894- seq_printf(f, "%-22s: %u\n", "pages_added", dm->num_pages_added);
--
drivers/hv/hv_balloon.c=1936=static int balloon_probe(struct hv_device *dev,
--
drivers/hv/hv_balloon.c-1942- if (allow_hibernation)
drivers/hv/hv_balloon.c:1943: hot_add = false;
drivers/hv/hv_balloon.c-1944-
--
drivers/hv/hv_balloon.c-1953- ha_pages_in_chunk = memory_block_size_bytes() / PAGE_SIZE;
drivers/hv/hv_balloon.c:1954: do_hot_add = hot_add;
drivers/hv/hv_balloon.c-1955-#else
--
drivers/hv/hv_balloon.c-1962- ha_pages_in_chunk = SZ_128M / PAGE_SIZE;
drivers/hv/hv_balloon.c:1963: do_hot_add = false;
drivers/hv/hv_balloon.c-1964-#endif
--
drivers/hv/hv_balloon.c-1972- INIT_WORK(&dm_device.balloon_wrk.wrk, balloon_up);
drivers/hv/hv_balloon.c:1973: INIT_WORK(&dm_device.ha_wrk.wrk, hot_add_req);
drivers/hv/hv_balloon.c-1974- dm_device.host_specified_ha_region = false;
--
drivers/md/dm-raid.c=3875=static void attempt_restore_of_faulty_devices(struct raid_set *rs)
--
drivers/md/dm-raid.c-3885- /* RAID personalities have to provide hot add/remove methods or we need to bail out. */
drivers/md/dm-raid.c:3886: if (!mddev->pers || !mddev->pers->hot_add_disk || !mddev->pers->hot_remove_disk)
drivers/md/dm-raid.c-3887- return;
--
drivers/md/dm-raid.c-3925-
drivers/md/dm-raid.c:3926: if (mddev->pers->hot_add_disk(mddev, r)) {
drivers/md/dm-raid.c-3927- /* Failed to revive this device, try next */
--
drivers/md/md-linear.c=316=static struct md_personality linear_personality = {
--
drivers/md/md-linear.c-327- .status = linear_status,
drivers/md/md-linear.c:328: .hot_add_disk = linear_add,
drivers/md/md-linear.c-329- .size = linear_size,
--
drivers/md/md.c=2982=static int add_bound_rdev(struct md_rdev *rdev)
--
drivers/md/md.c-2988- if (!mddev->pers->hot_remove_disk || add_journal) {
drivers/md/md.c:2989: /* If there is hot_add_disk but no hot_remove_disk
drivers/md/md.c-2990- * then added disks for geometry changes,
--
drivers/md/md.c-2994- validate_super(mddev, NULL/*freshest*/, rdev);
drivers/md/md.c:2995: err = mddev->pers->hot_add_disk(mddev, rdev);
drivers/md/md.c-2996- if (err) {
--
drivers/md/md.c=3284=slot_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3330-
drivers/md/md.c:3331: if (rdev->mddev->pers->hot_add_disk == NULL)
drivers/md/md.c-3332- return -EINVAL;
--
drivers/md/md.c-3344- clear_bit(Bitmap_sync, &rdev->flags);
drivers/md/md.c:3345: err = rdev->mddev->pers->hot_add_disk(rdev->mddev, rdev);
drivers/md/md.c-3346- if (err) {
--
drivers/md/md.c=7470=int md_add_new_disk(struct mddev *mddev, struct mdu_disk_info_s *info)
--
drivers/md/md.c-7520- int err;
drivers/md/md.c:7521: if (!mddev->pers->hot_add_disk) {
drivers/md/md.c-7522- pr_warn("%s: personality does not support diskops!\n",
--
drivers/md/md.c=7675=static int hot_remove_disk(struct mddev *mddev, dev_t dev)
--
drivers/md/md.c-7712-
drivers/md/md.c:7713:static int hot_add_disk(struct mddev *mddev, dev_t dev)
drivers/md/md.c-7714-{
--
drivers/md/md.c-7725- }
drivers/md/md.c:7726: if (!mddev->pers->hot_add_disk) {
drivers/md/md.c-7727- pr_warn("%s: personality does not support diskops!\n",
--
drivers/md/md.c=8323=static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
--
drivers/md/md.c-8487- case HOT_ADD_DISK:
drivers/md/md.c:8488: err = hot_add_disk(mddev, new_decode_dev(arg));
drivers/md/md.c-8489- goto unlock;
--
drivers/md/md.c=10087=static int remove_and_add_spares(struct mddev *mddev,
--
drivers/md/md.c-10110- rdev->recovery_offset = 0;
drivers/md/md.c:10111: if (mddev->pers->hot_add_disk(mddev, rdev) == 0) {
drivers/md/md.c-10112- /* failure here is OK */
--
drivers/md/md.h=227=enum flag_bits {
--
drivers/md/md.h-232- * The bit is only meaningful before device
drivers/md/md.h:233: * has been passed to pers->hot_add_disk.
drivers/md/md.h-234- */
--
drivers/md/md.h=751=struct md_personality
--
drivers/md/md.h-768- void (*error_handler)(struct mddev *mddev, struct md_rdev *rdev);
drivers/md/md.h:769: int (*hot_add_disk) (struct mddev *mddev, struct md_rdev *rdev);
drivers/md/md.h-770- int (*hot_remove_disk) (struct mddev *mddev, struct md_rdev *rdev);
--
drivers/md/raid1.c=3498=static struct md_personality raid1_personality =
--
drivers/md/raid1.c-3511- .error_handler = raid1_error,
drivers/md/raid1.c:3512: .hot_add_disk = raid1_add_disk,
drivers/md/raid1.c-3513- .hot_remove_disk= raid1_remove_disk,
--
drivers/md/raid10.c=5068=static struct md_personality raid10_personality =
--
]
|
| 104/2 |
2026/09/13 00:31 |
llm |
expert |
0m
Model:
Tokens:
input: 42345
output: 20
thoughts: 740
Thoughts: **Analyzing the zram `hot_add` vulnerability**
Okay, so I'm digging into this `hot_add` issue in `zram`. First thing's first, I remember `hot_add` is a class attribute. Let's look at the permissions. It's set to `0400`, meaning only root can actually read it and trigger the `hot_add` functionality. That much is clear: a regular user can't just spin up a new `zram` device directly.
Now, the question is, can they manipulate an *existing* `zram` device? Specifically, can they write to the `disksize` attribute? Looking at the permissions for that, it's `0644`, owned by root:root. So, nope, a regular unprivileged user can't write to `disksize` either. Seems like this bug isn't exploitable by standard user processes.
But hold on... I'm reminded of that Syzkaller reproducer. It's doing some interesting things: mounting sysfs, then opening `./sys/block/zram0/disksize`. I had assumed this was because Syzkaller was running as root in the initial namespace, which would give it the access needed. Or, it could be doing UID mapping from root (0) to its own user ID in a user namespace. But even with UID mapping, global root (0) wouldn't get mapped, and the permissions would not allow writing.
However, Syzkaller *does* have a sandbox mode called `namespace`, which creates a user namespace. The tricky part is: does this change things? If it runs as root, it *has* all privileges, so what's the point?
The actual question is, can the bug be triggered from a standard non-root user process *without* special capabilities. So, even in a user namespace with a uid 0 within, does the fact that `/sys/block/zram0/disksize` is `0644` root:root mean it's still inaccessible?
If I, as a non-root user, create a user namespace, I'm uid 0 within that namespace. I mount sysfs, and then try to write to `/sys/block/zram0/disksize`. The file is still owned by global root. Crucially, that global root isn't mapped in *my* namespace; the file owner is effectively `INVALID_UID`. The VFS will then check capability using `capable_wrt_inode_uidgid`, which will fail since the inode UID is not mapped. Therefore, I can't write to it. So, no access from unprivileged processes, even with user namespaces.
I should probably double-check if there's *any* other interface, like an ioctl or something, to manipulate `disksize`. Gotta be thorough.
|
| 105/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Args: map[Expression:zram_meta_alloc]
Results: map[Output:drivers/block/zram/zram_drv.c=1968=static void zram_meta_free(struct zram *zram, u64 disksize)
--
drivers/block/zram/zram_drv.c-1984-
drivers/block/zram/zram_drv.c:1985:static bool zram_meta_alloc(struct zram *zram, u64 disksize)
drivers/block/zram/zram_drv.c-1986-{
--
drivers/block/zram/zram_drv.c=2860=static ssize_t disksize_store(struct device *dev, struct device_attribute *attr,
--
drivers/block/zram/zram_drv.c-2879- disksize = PAGE_ALIGN(disksize);
drivers/block/zram/zram_drv.c:2880: if (!zram_meta_alloc(zram, disksize))
drivers/block/zram/zram_drv.c-2881- return -ENOMEM;
]
|
| 106/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 43996
output: 20
thoughts: 26
Thoughts: Here's my attempt at summarizing those thoughts, speaking as an expert:
**Investigating Disk Size Configuration**
Okay, so I'm focusing solely on `disksize_store` for now. But then, a thought strikes me: what if `disksize` isn't just configured through the conventional methods? What if it's being set dynamically, perhaps directly from the kernel command line or even as a module parameter? That could dramatically alter how I approach this. I need to account for those possibilities. My initial assumption about `disksize_store` might be overly simplistic. I should explore how those alternatives factor into the larger problem.
|
| 107/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Error:
Args: map[Expression:module_param.*disksize]
Results:
|
| 108/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 44190
output: 30
thoughts: 11
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Investigating `zram` Configuration**
Okay, so I need to get a handle on the current `zram` setup. Time to dive into the module parameters. I'm thinking I'll start by checking the obvious stuff - compression algorithm, disk size, number of devices... I expect it's probably set to something reasonable, but I want to verify it aligns with best practices for this particular workload. It's crucial to confirm whether the configuration is optimal for the specific resources and application profile. Gotta make sure it's not thrashing or overly conservative. Let's see what we're working with here.
|
| 109/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Args: map[Expression:module_param PathPrefix:drivers/block/zram/]
Results: map[Output:drivers/block/zram/zram_drv.c=3294=module_exit(zram_exit);
drivers/block/zram/zram_drv.c-3295-
drivers/block/zram/zram_drv.c:3296:module_param(num_devices, uint, 0);
drivers/block/zram/zram_drv.c-3297-MODULE_PARM_DESC(num_devices, "Number of pre-created zram devices");
]
|
| 110/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 44515
output: 22
thoughts: 941
Thoughts: **Analyzing the ZRAM `disksize` Vulnerability**
Okay, so there's no `disksize` module parameter, which is good. The core of this seems to be a `WARN_ON_ONCE(!size)` in `__vmalloc_node_range_noprof`, and it returns `NULL`. But the code in `zram_meta_alloc` handles the `NULL` return by just returning `false`, which is then correctly handled as `-ENOMEM` by `disksize_store`.
Crucially, there's no memory corruption, no out-of-bounds access, no use-after-free, and definitely no information leak. It's just a warning. In a production kernel where `panic_on_warn` isn't set, it'll just print and continue, no denial of service. The zram device state remains consistent.
Let's dive deeper, though. The `PAGE_ALIGN` function is in play. If `disksize` is `0xffffffffffffffff`, `PAGE_ALIGN` effectively makes it `0`. `zram_meta_alloc` returns `false`, and `disksize_store` returns `-ENOMEM`. The `disksize` of the zram device remains unchanged, it's not corrupt.
Aha! There's also this:
```c
guard(rwsem_write)(&zram->dev_lock);
if (init_done(zram)) {
pr_info("Cannot change disksize for initialized device\n");
return -EBUSY;
}
```
So, it can only be changed if the device isn't initialized. If the `zram_meta_alloc` fails, it returns `-ENOMEM`, and the state is untouched. No state corruption possible.
Can this be triggered? Thinking about it: no VM guest can touch the host's sysfs directly unless explicitly passed through. And no for confidential computing hosts, because it's a host block device. There is no network trigger, peripheral trigger or malicious filesystem trigger. It requires a sysfs write.
Okay, let's double-check that `PAGE_ALIGN` can only wrap to zero. If `disksize` is `0xffffffffffffffff`, `PAGE_ALIGN` is the same as adding 4095 and then masking off the lower bits. This will result in 0. So values in the range [-4095, -1] will also wrap to zero. That makes sense, because `vzalloc(0)` will trigger the warning.
However, what if `disksize` is *not* equal to -1?
Let's say `disksize` is `0xfffffffffffff000`. `PAGE_ALIGN` will return this same value. Then `num_pages` is this value shifted right 12 bits, so it will become 0xfffffffffffff. The size of the `zram->table` is `array_size(num_pages, sizeof(*zram->table))`, and so `sizeof(*zram->table)` is the size of `struct zram_table_entry`. We need to verify that this is indeed an integer that is valid to compute the array size.
|
| 111/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Error:
Args: map[Expression:struct zram_table_entry {]
Results:
|
| 112/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 46214
output: 22
thoughts: 5
Thoughts: Okay, here's my attempt at summarizing the thought process, as requested, geared toward an expert audience, and written in the first person:
**Navigating the Labyrinth of Regex**
Alright, here we go again. Regex syntax. *sigh*. It's like revisiting an old, familiar friend who's also a bit of a riddle wrapped in an enigma. I know the principles, the underlying mechanisms, but each project, each specific pattern, presents its own unique twist. I start by recalling the core concepts: character classes, quantifiers, anchors – the usual suspects. Then I have to think through the subtleties of escaping, the nuances of lookarounds, and how to effectively utilize non-greedy matching when it's appropriate, not just because it's the "best" thing to use, but because it is the appropriate thing to use. I'm immediately trying to see the problem in terms of the building blocks I have available. Is it a matter of defining boundaries, capturing specific groups, or simply validating a format? The challenge always lies in the translation: mapping the human-understandable problem description into a precise, unambiguous regex expression. What are the corner cases I need to consider? Do I have to handle internationalization or special characters? I start by sketching out a naive approach, knowing full well I'll have to iterate and refine, constantly testing and adjusting until the pattern behaves *exactly* as intended. It's a dance, really – a careful interplay between intuition, precision, and a healthy dose of debugging. Regex mastery is an iterative process - it's a tool, and knowing when to use the right tool is the challenge.
|
| 113/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Args: map[Expression:struct zram_table_entry \{]
Results: map[Output:drivers/block/zram/zram_drv.h=45=enum zram_pageflags {
--
drivers/block/zram/zram_drv.h-65- */
drivers/block/zram/zram_drv.h:66:struct zram_table_entry {
drivers/block/zram/zram_drv.h-67- unsigned long handle;
]
|
| 114/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 46690
output: 40
thoughts: 24
Thoughts: Here's a summary of my thought process, as requested:
**Diving into `zram_drv.h`**
Okay, let's get down to brass tacks. I'm going to start by taking a look at `drivers/block/zram/zram_drv.h`. This is where the core definitions for ZRAM, the compressed RAM block device, should be. I'm particularly interested in line 66. It's usually around that point where the major data structures or key function prototypes begin to be declared. I want to see how the core components are structured. I anticipate finding some key data structure definitions, probably related to the ZRAM device itself, the compression algorithms, or maybe the internal page management. This file is the gateway to understanding how the ZRAM driver interacts with the kernel's block layer and memory management. I'm ready to dig in and understand the architecture. Let's see what we've got.
|
| 115/2 |
2026/09/13 00:32 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.h FirstLine:60 LineCount:20]
Results: map[Contents: 60: /*
61: * Allocated for each disk page. We use bit-lock (ZRAM_ENTRY_LOCK bit
62: * of flags) to save memory. There can be plenty of entries and standard
63: * locking primitives (e.g. mutex) will significantly increase sizeof()
64: * of each entry and hence of the meta table.
65: */
66: struct zram_table_entry {
67: unsigned long handle;
68: union {
69: unsigned long __lock;
70: struct attr {
71: u32 flags;
72: #ifdef CONFIG_ZRAM_TRACK_ENTRY_ACTIME
73: u32 ac_time;
74: #endif
75: } attr;
76: };
77: struct lockdep_map dep_map;
78: };
79:
]
|
| 116/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 47221
output: 18
thoughts: 481
Thoughts: **Analyzing Potential Overflow in `zram_table_entry` Allocation**
Okay, so I'm looking at this `struct zram_table_entry`. I know it's at least 16 bytes – a `unsigned long` and a union. The code's checking for potential overflow when calculating an array size based on the number of pages. Specifically, if `num_pages` is `0xfffffffffffff`, the `array_size` macro comes into play. It's designed to return `SIZE_MAX` if the multiplication overflows.
Now, my initial thought was that `0xfffffffffffff * 16` *would* overflow because `SIZE_MAX` is `0xffffffffffffffff`. But then I paused. Wait, `0xfffffffffffff` is only 52 bits and `16` is 4 bits. Doing the math, `52 + 4 = 56` bits total. My immediate thought that this *must* overflow. It does not.
It seems my first intuition was wrong. `0xfffffffffffff * 16` is actually `0xfffffffffffff0`. This *fits* within 64 bits! I was thinking about it incorrectly. I have to think, it's really `(1 << 52) - 1` times `16`. Which means it is really `(1 << 56) - 16`. So the multiplication *doesn't* overflow.
Okay, so `array_size` will return `0xfffffffffffff0`. Then `vzalloc` gets called with that massive size. Now `vzalloc` does a sanity check. It makes sure the size doesn't exceed `totalram_pages()`.
```c
if ((size >> PAGE_SHIFT) > totalram_pages()) {
warn_alloc(gfp_mask, NULL,
"vmalloc error: size %lu, exceeds total pages",
size);
return NULL;
}
```
Now, that `size` is shifted right by `PAGE_SHIFT` which is 12 (4096), so it divides `0xfffffffffffff0` by 4096.
This calculates to `0xfffffffffffff`.
This is *way* bigger than `totalram_pages()` unless the system is absolutely huge (like 16 exabytes of RAM), so this check *should* trigger. `vzalloc` should print a warning, and return `NULL`. The code will catch this null return.
Now, does that warning actually cause a problem? That's what I have to clarify. I need to make sure this is not a `panic_on_warn` case. Let's see... `warn_alloc` doesn't use `WARN()`. It calls `pr_warn` and `dump_stack` though. Let's dig into that `warn_alloc` function itself.
|
| 117/2 |
2026/09/13 00:32 |
tool |
grepper |
0m
Args: map[Expression:void warn_alloc]
Results: map[Output:include/linux/mm.h=4054=extern __printf(3, 4)
include/linux/mm.h:4055:void warn_alloc(gfp_t gfp_mask, nodemask_t *nodemask, const char *fmt, ...);
include/linux/mm.h-4056-
--
mm/page_alloc.c=3792=get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
--
mm/page_alloc.c-3981-
mm/page_alloc.c:3982:static void warn_alloc_show_mem(gfp_t gfp_mask, nodemask_t *nodemask)
mm/page_alloc.c-3983-{
--
mm/page_alloc.c-4001-
mm/page_alloc.c:4002:void warn_alloc(gfp_t gfp_mask, nodemask_t *nodemask, const char *fmt, ...)
mm/page_alloc.c-4003-{
]
|
| 118/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 48643
output: 36
thoughts: 9
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in my domain of expertise:
**Diving into `warn_alloc`**
Right, let's get down to brass tacks. "Let's read `warn_alloc`." Sounds like we're about to dissect a specific piece of code, probably a function, module, or macro, named `warn_alloc`. Just seeing that name, I already have a few assumptions percolating. Given the name, it's highly probable this code is related to memory allocation, or at least memory usage, and it's probably designed to issue some kind of warning. Perhaps it flags allocation failures, checks for potential memory leaks, or maybe even suggests optimization opportunities related to how memory is being handled. Whatever its role, I'm expecting some critical insight into how the program manages its memory footprint. Time to dig in and see what secrets it holds. Let's see what we find.
|
| 119/2 |
2026/09/13 00:32 |
tool |
read-file |
0m
Args: map[File:mm/page_alloc.c FirstLine:4000 LineCount:20]
Results: map[Contents:4000: }
4001:
4002: void warn_alloc(gfp_t gfp_mask, nodemask_t *nodemask, const char *fmt, ...)
4003: {
4004: struct va_format vaf;
4005: va_list args;
4006: static DEFINE_RATELIMIT_STATE(nopage_rs, 10*HZ, 1);
4007:
4008: if ((gfp_mask & __GFP_NOWARN) ||
4009: !__ratelimit(&nopage_rs) ||
4010: ((gfp_mask & __GFP_DMA) && !has_managed_dma()))
4011: return;
4012:
4013: va_start(args, fmt);
4014: vaf.fmt = fmt;
4015: vaf.va = &args;
4016: pr_warn("%s: %pV, mode:%#x(%pGg), nodemask=%*pbl",
4017: current->comm, &vaf, gfp_mask, &gfp_mask,
4018: nodemask_pr_args(nodemask));
4019: va_end(args);
]
|
| 120/2 |
2026/09/13 00:32 |
llm |
expert |
0m
Model:
Tokens:
input: 49248
output: 42
thoughts: 863
Thoughts: **Analyzing the ZRAM `disksize` Bug**
Okay, so `warn_alloc` just wraps `pr_warn` and `dump_stack`, it's not a full panic-triggering `WARN()`. Good. My focus is on this specific `WARN_ON_ONCE(!size)` in `__vmalloc_node_range_noprof`, which is triggered when `size` is zero. That zero `size` arises from `disksize` wrapping around to zero after a `PAGE_ALIGN` operation. This means `disksize` has to be a large negative value, specifically between `-PAGE_SIZE + 1` and -1 (think `0xffffffffffffffff`).
So, the crux is a `WARN_ON_ONCE(!size)` caused by writing a very large value to `/sys/block/zram0/disksize`. The file permissions, `0644` root:root, are the key here. This means only root can write to it directly. No unprivileged process, and not even users within user namespaces (because global root is not typically mapped within those namespaces) can affect this file directly.
Wait, if root creates a user namespace... But even then, root already has access to the file. Hmm, what if an unprivileged user created a namespace, and then a privileged process wrote to the file? That doesn't seem to be the attack vector. No, the bug is still, effectively, root-only.
Let me assess the dimensions of the potential impact:
* **Exploitable:** No. It's just a warning. The code handles the `NULL` return value gracefully.
* **Denial of Service:** No. It's just a warning. It does not crash the system.
* **Accessible From Unprivileged Processes:** No.
* **Accessible From User Namespaces:** No.
* **VM Guest Trigger:** No.
* **VM Host Trigger in The Confidential Computing Context:** No.
* **Ethernet Network Trigger:** No.
* **Other Remote Trigger:** No.
* **Peripheral Trigger:** No.
* **Malicious Filesystem Trigger:** No.
But, are there any other ways to trigger `disksize_store`? Is `zram` a backing device, somehow? No, `disksize` is solely controlled by the sysfs file. Is there any other sysfs file that can trigger this? Nope, the bug is right in `disksize_store`.
Let's double-check if an unprivileged user can create and configure `zram` using another mechanism, perhaps through `loop` devices? No, that's a different implementation. What about `zram-control`? The `hot_add` file is `0400` root:root. So, nope.
Is there any capability check inside `disksize_store`? No, it relies entirely on the sysfs file permissions. The `DEVICE_ATTR_RW(disksize)` creates the `0644` permissions. So, root has exclusive write access.
Let's make sure, can `sysfs` files be owned by a non-root user? `udev` rules can change the ownership, but we can assume default configuration: root:root.
Let's double-check again that `zram_meta_alloc` can *only* be called from `disksize_store`:
```c
static void zram_meta_free(struct zram *zram, u64 disksize)
static bool zram_meta_alloc(struct zram *zram, u64 disksize)
```
Looks like `zram_meta_alloc` is *only* called from `disksize_store`. *Wait*, what about `reset_store`?
|
| 121/2 |
2026/09/13 00:33 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.c FirstLine:2909 LineCount:50]
Results: map[Contents:2909: static ssize_t reset_store(struct device *dev,
2910: struct device_attribute *attr, const char *buf, size_t len)
2911: {
2912: int ret;
2913: unsigned short do_reset;
2914: struct zram *zram;
2915: struct gendisk *disk;
2916:
2917: ret = kstrtou16(buf, 10, &do_reset);
2918: if (ret)
2919: return ret;
2920:
2921: if (!do_reset)
2922: return -EINVAL;
2923:
2924: zram = dev_to_zram(dev);
2925: disk = zram->disk;
2926:
2927: mutex_lock(&disk->open_mutex);
2928: /* Do not reset an active device or claimed device */
2929: if (disk_openers(disk) || zram->claim) {
2930: mutex_unlock(&disk->open_mutex);
2931: return -EBUSY;
2932: }
2933:
2934: /* From now on, anyone can't open /dev/zram[0-9] */
2935: zram->claim = true;
2936: mutex_unlock(&disk->open_mutex);
2937:
2938: /* Make sure all the pending I/O are finished */
2939: sync_blockdev(disk->part0);
2940: zram_reset_device(zram);
2941:
2942: mutex_lock(&disk->open_mutex);
2943: zram->claim = false;
2944: mutex_unlock(&disk->open_mutex);
2945:
2946: return len;
2947: }
2948:
2949: static int zram_open(struct gendisk *disk, blk_mode_t mode)
2950: {
2951: struct zram *zram = disk->private_data;
2952:
2953: WARN_ON(!mutex_is_locked(&disk->open_mutex));
2954:
2955: /* zram was claimed to reset so open request fails */
2956: if (zram->claim)
2957: return -EBUSY;
2958: return 0;
]
|
| 122/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 51680
output: 21
thoughts: 14
Thoughts: Here's a summary of my understanding, framed from my perspective as an expert:
**Understanding the Reset Process**
Okay, so I see that `reset_store` is the function that's being called, and it's responsible for interacting with the `zram` subsystem. My immediate thought is, based on the naming, that this likely initiates some kind of reset procedure. I'm inferring, then, that `zram_reset_device` is the lower-level function that `reset_store` actually *calls*. That's the core of the functionality. So, `reset_store` acts as an intermediary, likely handling any necessary setup, parameter passing, or error checking before delegating the nitty-gritty reset work to `zram_reset_device`. This structure is pretty standard in kernel code – higher-level functions handle user interface and parameter validation while lower-level functions perform the more direct operations. From a design standpoint, that suggests a modular approach, improving code maintainability.
|
| 123/2 |
2026/09/13 00:33 |
tool |
grepper |
0m
Args: map[Expression:void zram_reset_device]
Results: map[Output:drivers/block/zram/zram_drv.c=2822=static void zram_destroy_comps(struct zram *zram)
--
drivers/block/zram/zram_drv.c-2840-
drivers/block/zram/zram_drv.c:2841:static void zram_reset_device(struct zram *zram)
drivers/block/zram/zram_drv.c-2842-{
]
|
| 124/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 52054
output: 42
thoughts: 12
Thoughts: Okay, let's dive into `zram_reset_device`. I want to understand exactly what happens when we reset a zram device. This function is critical for ensuring data integrity and allowing for a clean slate when necessary. I need to figure out what data structures it interacts with, what memory it touches, and what implications the reset has on any ongoing I/O operations. I'm especially interested in how it handles dirty pages and what kind of synchronization is involved to avoid race conditions. Are we invalidating caches? Are we freeing pages? What's the general process for restoring the device to its initial state? I'll be looking for any potential performance bottlenecks or subtle bugs that could arise during a reset. My focus will be the mechanisms of how this function guarantees that the reset is clean, complete, and doesn't leave the system in a corrupted state.
|
| 125/2 |
2026/09/13 00:33 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.c FirstLine:2841 LineCount:20]
Results: map[Contents:2841: static void zram_reset_device(struct zram *zram)
2842: {
2843: guard(rwsem_write)(&zram->dev_lock);
2844:
2845: zram->limit_pages = 0;
2846:
2847: set_capacity_and_notify(zram->disk, 0);
2848: part_stat_set_all(zram->disk->part0, 0);
2849:
2850: /* I/O operation under all of CPU are done so let's free */
2851: zram_meta_free(zram, zram->disksize);
2852: zram->disksize = 0;
2853: zram_destroy_comps(zram);
2854: memset(&zram->stats, 0, sizeof(zram->stats));
2855: reset_bdev(zram);
2856:
2857: comp_algorithm_set(zram, ZRAM_PRIMARY_COMP, default_compressor);
2858: }
2859:
2860: static ssize_t disksize_store(struct device *dev, struct device_attribute *attr,
]
|
| 126/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 52636
output: 18
thoughts: 46
Thoughts: Okay, here's my interpretation of those thoughts, presented as my own mental process, given my expertise:
**Checking ZRAM Memory Management**
Alright, let's see... so, regarding the potential zram bug, the fact that `zram_reset_device` calls `zram_meta_free` but *not* `zram_meta_alloc` means it's probably not the culprit directly. That's a good starting point to rule things out. We know we aren't looking at that function to find our root cause.
Now, the question is, what other functions might have memory allocation issues? What function does relate? `zram_add`... I need to check how `zram_add` handles memory allocation, deallocation, and metadata management. That's the next obvious place to dig in. Gotta keep an eye out for any inconsistencies or potential double-frees there. Let's see what the code shows...
|
| 127/2 |
2026/09/13 00:33 |
tool |
grepper |
0m
Args:
Results: map[Output:drivers/block/zram/zram_drv.c=3023=ATTRIBUTE_GROUPS(zram_disk);
--
drivers/block/zram/zram_drv.c-3028- */
drivers/block/zram/zram_drv.c:3029:static int zram_add(void)
drivers/block/zram/zram_drv.c-3030-{
--
drivers/block/zram/zram_drv.c=3167=static ssize_t hot_add_show(const struct class *class,
--
drivers/block/zram/zram_drv.c-3173- mutex_lock(&zram_index_mutex);
drivers/block/zram/zram_drv.c:3174: ret = zram_add();
drivers/block/zram/zram_drv.c-3175- mutex_unlock(&zram_index_mutex);
--
drivers/block/zram/zram_drv.c=3244=static int __init zram_init(void)
--
drivers/block/zram/zram_drv.c-3273- mutex_lock(&zram_index_mutex);
drivers/block/zram/zram_drv.c:3274: ret = zram_add();
drivers/block/zram/zram_drv.c-3275- mutex_unlock(&zram_index_mutex);
]
|
| 128/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 53277
output: 42
thoughts: 10
Thoughts: Okay, let's dive into `zram_add`. I know this code well, but it's always good to refresh the memory and make sure my understanding is solid. I'm going to look at the implementation of `zram_add`, focusing on the core logic and how it fits into the broader zram framework. I'm particularly interested in how it allocates and initializes a new zram device. I'll pay close attention to the memory management aspects – how the pages are handled, any locking involved, and potential concurrency issues. I'll consider error handling, too; what happens if a memory allocation fails, or if a resource is unavailable? I expect it to manage various structures, like the zram device itself, its backing storage, and any associated statistics. I anticipate looking for any potential optimization opportunities. Let's see what the code reveals. I want to understand exactly what each line does.
|
| 129/2 |
2026/09/13 00:33 |
tool |
read-file |
0m
Args: map[File:drivers/block/zram/zram_drv.c FirstLine:3029 LineCount:50]
Results: map[Contents:3029: static int zram_add(void)
3030: {
3031: struct queue_limits lim = {
3032: .logical_block_size = ZRAM_LOGICAL_BLOCK_SIZE,
3033: /*
3034: * To ensure that we always get PAGE_SIZE aligned and
3035: * n*PAGE_SIZED sized I/O requests.
3036: */
3037: .physical_block_size = PAGE_SIZE,
3038: .io_min = PAGE_SIZE,
3039: .io_opt = PAGE_SIZE,
3040: .max_hw_discard_sectors = UINT_MAX,
3041: /*
3042: * zram_bio_discard() will clear all logical blocks if logical
3043: * block size is identical with physical block size(PAGE_SIZE).
3044: * But if it is different, we will skip discarding some parts of
3045: * logical blocks in the part of the request range which isn't
3046: * aligned to physical block size. So we can't ensure that all
3047: * discarded logical blocks are zeroed.
3048: */
3049: #if ZRAM_LOGICAL_BLOCK_SIZE == PAGE_SIZE
3050: .max_write_zeroes_sectors = UINT_MAX,
3051: #endif
3052: .features = BLK_FEAT_STABLE_WRITES |
3053: BLK_FEAT_SYNCHRONOUS,
3054: };
3055: struct zram *zram;
3056: int ret, device_id;
3057:
3058: zram = kzalloc_obj(struct zram);
3059: if (!zram)
3060: return -ENOMEM;
3061:
3062: ret = idr_alloc(&zram_index_idr, zram, 0, 0, GFP_KERNEL);
3063: if (ret < 0)
3064: goto out_free_dev;
3065: device_id = ret;
3066:
3067: init_rwsem(&zram->dev_lock);
3068: #ifdef CONFIG_ZRAM_WRITEBACK
3069: zram->wb_batch_size = 32;
3070: zram->compressed_wb = false;
3071: #endif
3072:
3073: /* gendisk structure */
3074: zram->disk = blk_alloc_disk(&lim, NUMA_NO_NODE);
3075: if (IS_ERR(zram->disk)) {
3076: pr_err("Error allocating disk structure for device %d\n",
3077: device_id);
3078: ret = PTR_ERR(zram->disk);
]
|
| 130/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 54331
output: 28
thoughts: 203
Thoughts: **My Assessment of the zram Code**
Okay, so I've been digging into this `zram_add` function, and here's what I've found. It doesn't actually initialize the data structures that would be susceptible to the issue in question, specifically, `zram->table` or call `zram_meta_alloc`. All it does is allocate the `zram` struct and the "disk" (which starts with a `disksize` of zero). The critical point is that the `disksize` needs to be explicitly configured via `disksize_store`.
That seems to be the only vector. And, as I understand it, `disksize_store` is only accessible to the root user. So, from a practical exploitation standpoint, I can confidently say that this bug is not accessible by unprivileged processes. It's not triggerable from within a user namespace either, since the relevant file is owned by global root. So, even a compromised process wouldn't be able to exploit it.
Therefore, this isn't exploitable. It's not a denial-of-service vulnerability either, since it can't be triggered by normal, unprivileged processes. I'm also fairly confident that it can't be triggered from a VM guest, over a network, by a malicious peripheral, or by a malicious filesystem.
Just to be absolutely certain, I'm going to quickly check if there are any other possible ways to modify that `disksize` attribute. Does `zram` have any custom ioctls that might provide an alternative path? No? Alright, that's a check. My initial assessment is holding.
|
| 131/2 |
2026/09/13 00:33 |
tool |
grepper |
0m
Error:
Args: map[Expression:ioctl PathPrefix:drivers/block/zram/]
Results:
|
| 132/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 54927
output: 66
thoughts: 738
Thoughts: **Analyzing the Potential Impact of a Kernel Warning**
Okay, so I'm looking at this kernel warning, and my initial thought is: no ioctls, right? The only avenue here is sysfs. And, as we know, sysfs file permissions are `0644`. That means, in the standard configuration, only root can write to those files.
Let's quickly summarize my findings so far. Is this exploitable? No, it's just a warning. Denial of Service? Nope, again, just a warning. Accessible from unprivileged processes? No way. User namespaces? Still no. Can a VM guest trigger it? Not likely. Confidential computing context? No. Remote triggers of any kind? Nope. Peripherals? No. Malicious filesystems? No chance.
Now, let me double-check about the denial-of-service aspect, specifically related to `panic_on_warn`. The prompt tells me to consider if this warning, even if it doesn't immediately crash the system, could cause a DoS. Since the kernel has `if (WARN_ON_ONCE(!size)) return NULL;`, it's handled by the normal control flow, so I am confident it won't cause a DoS in a production environment.
Okay, let's circle back to the zram aspect. Is there any way an unprivileged user can manipulate `/sys/block/zram0/disksize`? Nope. The file owner is root, and the permissions are `0644`. Can they change the ownership or permissions? No. Can they mount sysfs and write to it? No, because, as I've already established, sysfs is owned by global root, which is not mapped within the user namespace.
Wait, what if they were to map their uid to 0 within the user namespace? But hang on, the sysfs files are owned by global root. So the user's uid is, let's say 1000. In their namespace, they map global uid 1000 to local uid 0. Global uid 0 is not mapped. The sysfs file appears to be owned by `nobody` or the `overflowuid`. They do not have `CAP_DAC_OVERRIDE` over files with unmapped uids. This is a non-issue.
But, hold on... What if the unprivileged user *is* global root? The prompt is very specific: "Determine if the bug can be reached from a typical (non-root) user process that does NOT have any special capabilities." Therefore, we are not considering the case where the user is root.
So, taking all this into consideration, the conclusion is clear: this bug is not accessible from unprivileged processes. Time to call `set-results` with all false.
|
| 133/2 |
2026/09/13 00:33 |
tool |
set-results |
0m
Args: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
Results: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:false RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:false VMHostTrigger:false]
|
| 134/2 |
2026/09/13 00:33 |
llm |
expert |
0m
Model:
Tokens:
input: 56390
output: 617
thoughts: 320
Thoughts: **My Assessment of the Zram Disksize Bug**
Okay, the deep dive is done, and it's time to consolidate my findings into a final response. The gist of it is this: we've got a `WARN_ON_ONCE` in `__vmalloc_node_range_noprof` triggered by an extreme value written to `/sys/block/zram0/disksize`. Specifically, if I feed it something like `0xffffffffffffffff`, the parsing and `PAGE_ALIGN()` wrap it down to zero. That zero gets passed to `vzalloc(0)` within `zram_meta_alloc`, and *bam*, the warning pops.
Here's the kicker: the warning is correctly handled! It returns NULL, and the subsequent code in `zram_meta_alloc` properly detects the allocation failure and reports back `-ENOMEM`. So, no memory corruption, no outright crash (especially in a production environment without `panic_on_warn` enabled), and critically, no denial of service. The system gracefully recovers.
Now, let's talk about exploitability. The `/sys/block/zram0/disksize` file is owned by root and has `0644` permissions. That automatically means that only a privileged user can write to it. Even if someone manages to create a user namespace and mount sysfs, they're still blocked because the file is owned by the global root, and that ownership doesn't magically translate into the user namespace (it appears as `nobody`). This means this bug isn't something a standard user, or someone with limited privileges, can reach. It's not reachable through the network, by peripherals, malicious filesystems, or from within a VM guest. It's effectively contained within privileged operations.
|
| 135/1 |
2026/09/13 00:34 |
action |
format-explanation |
0m
Results: map[Explanation:**Analysis of the Bug**
The bug report indicates a `WARN_ON_ONCE(!size)` triggered in
`__vmalloc_node_range_noprof()` when attempting to allocate memory with a size
of 0.
Following the call trace, the bug is triggered by writing to the
`/sys/block/zram0/disksize` sysfs attribute. The `disksize_store()` function in
`drivers/block/zram/zram_drv.c` parses the user-provided string into a `u64
disksize` and then aligns it to the page size using `PAGE_ALIGN(disksize)`.
If a very large value is written (e.g., `0xffffffffffffffff` as seen in the
syzkaller reproducer), the `PAGE_ALIGN()` macro causes the value to wrap around
to `0`. Consequently, `zram_meta_alloc()` calculates `num_pages = 0` and calls
`vzalloc(0)`. This triggers the `WARN_ON_ONCE(!size)` in the vmalloc code.
**Exploitability and Denial of Service**
The warning is properly handled by the kernel's control flow. The
`__vmalloc_node_range_noprof()` function simply returns `NULL` after emitting
the warning. The caller, `zram_meta_alloc()`, correctly checks for this `NULL`
return value and gracefully fails, causing `disksize_store()` to return
`-ENOMEM`.
There is no memory corruption, out-of-bounds access, or resource leak. In a
production environment where `panic_on_warn` is disabled, the system will just
log the warning and continue executing normally. Therefore, this bug is neither
exploitable nor does it cause a denial of service.
**Accessibility**
The sysfs attribute `/sys/block/zram0/disksize` is created with `0644`
permissions and is owned by the global `root` user.
- **Unprivileged Processes:** A typical non-root user cannot write to this file
due to the DAC permissions.
- **User Namespaces:** If an unprivileged user creates a new user namespace and
mounts `sysfs`, the file will still be owned by the global root user. Since the
global root UID is not mapped in the unprivileged user's namespace, the file's
owner will appear as `nobody` (or `overflowuid`). The user will not have
`CAP_DAC_OVERRIDE` privileges over files owned by unmapped UIDs, meaning they
still cannot write to the file.
Thus, the bug is strictly reachable only by a globally privileged user (root).
**Other Triggers**
The bug is isolated to the sysfs configuration interface of the `zram` block
device. It cannot be triggered via network traffic, peripheral devices,
malicious filesystems, or from within a VM guest.]
|