| 0/0 |
2026/06/01 18:35 |
flow |
moderation |
55m
Results: map[Actionable:true Explanation:The bug report describes a use-after-free (UAF) vulnerability in the `stop_tty`
function within the TTY subsystem. The report is highly consistent and
actionable, providing all three necessary stack traces: the bad memory access,
the heap block allocation, and the heap block free stack.
### Analysis of the Stack Traces:
1. **Access Stack**: The UAF occurs in `stop_tty` (specifically in the inlined
`__stop_tty` at `drivers/tty/tty_io.c:742`), which is called from `fn_hold` in
`drivers/tty/vt/keyboard.c`. This is triggered by a keyboard event (`kbd_event`
-> `kbd_keycode`) initiated by a user-space task (`syz.1.2/5837`) writing to an
`evdev` device (`evdev_write`).
2. **Allocation Stack**: The `tty_struct` was allocated by task 5835 during a
`tty_open` operation, which calls `tty_init_dev` and `alloc_tty_struct`.
3. **Free Stack**: The `tty_struct` was freed by a workqueue worker (task 5800)
executing `release_one_tty`. The "Last potentially related work creation" stack
confirms that this work was queued during `tty_release` (when the last file
descriptor to the TTY was closed).
### Root Cause:
The root cause is a race condition between the TTY release process and the
keyboard event handler. In `drivers/tty/vt/keyboard.c`, the functions
`kbd_keycode` and `fn_hold` obtain a pointer to the `tty_struct` directly from
`vc->port.tty` without taking a reference count (kref).
```c
// drivers/tty/vt/keyboard.c
tty = vc->port.tty;
...
(*k_handler[type])(vc, KVAL(keysym), !down); // calls fn_hold
```
While `release_tty` (called during `tty_release`) does call `con_shutdown` to
set `vc->port.tty = NULL`, it does so just before dropping the final reference.
If `kbd_keycode` or `fn_hold` reads the pointer just before it's cleared, and
then the `tty_struct` is freed by the workqueue before the keyboard handler
finishes using it, a UAF occurs.
### Consistency and Actionability:
- **Consistent Object**: All three stacks correctly refer to a `tty_struct`
(allocated in `alloc_tty_struct`, freed in `free_tty_struct`).
- **Consistent Subsystem**: The bug is entirely contained within the TTY and
VT (Virtual Terminal) subsystems.
- **Clear Mechanism**: The mechanism of the failure (race between
`tty_release` and `kbd_event`) is well-supported by the provided stacks and the
kernel source code.
- **Actionable**: The report provides enough information to identify the
missing refcounting in `drivers/tty/vt/keyboard.c` as the likely fix (e.g.,
using `tty_port_tty_get()` instead of direct access).
The report is self-consistent and provides all the necessary information to root
cause the bug.]
|
| 1/1 |
2026/06/01 18:35 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/0a2d2406965b48ddaf344179001bc441683a7b09]
|
| 2/1 |
2026/06/01 18:35 |
action |
kernel-builder |
28m
Results: map[KernelObj:/app/workdir/cache/build/5f343b76b8eb3c5bef742def5b878a1cb5d48cf1]
|
| 3/1 |
2026/06/01 19:04 |
action |
codesearch-prepare |
22m
Results: map[Index:codesearch-index]
|
| 4/1 |
2026/06/01 19:26 |
agent |
expert |
3m
Model:
Results:
Instruction: You are an experienced Linux kernel developer tasked with determining if the given kernel bug
report is actionable or not. Actionable means that it contains enough info to root cause
the underlying bug, and that the report is self-consistent and makes sense, rather than
e.g. a one-off nonsensical crash induced by a previous memory corruption.
The bug report is about a use-after-free bug generated by KASAN tool.
It should contain 3 stack traces: the bad memory access stack, the heap block allocation stack,
and the heap block free stack. If the report does not contain 3 stacks, it's not actionable.
All 3 stack traces should be related to the same object type,
and usually be in the same kernel subsystem (at least leaf stack frames).
An example of an actionable and consistent report would be: first access stack relates
to an access to a field of struct Foo, allocation/free stacks relate to allocation/free
of the struct Foo.
In inconsistent/nonsensical reports an access may be to a struct Foo, but allocation
stack allocates a different structure in a different subsystem.
Look for other suspicious signals/inconsistencies that can make this report hard to
debug/understand.
In the final reply explain why you think the report is self-consistent and actionable,
or why it's inconsistent and/or not actionable.
Use the provided tools to confirm any assumptions, variables/fields being accessed, etc.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The bug report is:
==================================================================
BUG: KASAN: slab-use-after-free in stop_t[ 93.746644][ T5837] BUG: KASAN: slab-use-after-free in __stop_tty drivers/tty/tty_io.c:742 [inline]
BUG: KASAN: slab-use-after-free in stop_t[ 93.746644][ T5837] BUG: KASAN: slab-use-after-free in stop_tty+0x115/0x140 drivers/tty/tty_io.c:766
Read of size 1 at addr ffff888037076480 by task syz.1.2/5837
CPU: 1 UID: 0 PID: 5837 Comm: syz.1.2 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
__stop_tty drivers/tty/tty_io.c:742 [inline]
stop_tty+0x115/0x140 drivers/tty/tty_io.c:766
kbd_keycode drivers/tty/vt/keyboard.c:1565 [inline]
kbd_event+0x2f91/0x42f0 drivers/tty/vt/keyboard.c:1583
input_handle_events_default+0xd4/0x1a0 drivers/input/input.c:2558
input_pass_values+0x288/0x890 drivers/input/input.c:128
input_event_dispose+0x330/0x6b0 drivers/input/input.c:342
input_inject_event+0x1d7/0x320 drivers/input/input.c:424
evdev_write+0x328/0x4c0 drivers/input/evdev.c:528
vfs_write+0x2a3/0xba0 fs/read_write.c:686
ksys_write+0x156/0x270 fs/read_write.c:740
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdc7927ce59
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdc7748c028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdc794f6180 RCX: 00007fdc7927ce59
RDX: 0000000000002250 RSI: 0000200000000040 RDI: 0000000000000008
RBP: 00007fdc79312d6f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdc794f6218 R14: 00007fdc794f6180 R15: 00007fff3e71db88
</TASK>
Allocated by task 5835:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x3a6/0x690 mm/slub.c:5420
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
alloc_tty_struct+0xa6/0x7b0 drivers/tty/tty_io.c:3102
tty_init_dev+0x59/0x4d0 drivers/tty/tty_io.c:1400
tty_open_by_driver drivers/tty/tty_io.c:2073 [inline]
tty_open+0x86e/0xd80 drivers/tty/tty_io.c:2120
chrdev_open+0x4d0/0x5f0 fs/char_dev.c:411
do_dentry_open+0x83d/0x13e0 fs/open.c:947
vfs_open+0x3b/0x350 fs/open.c:1079
do_open fs/namei.c:4699 [inline]
path_openat+0x2e43/0x38a0 fs/namei.c:4858
do_file_open+0x23e/0x4a0 fs/namei.c:4887
do_sys_openat2+0x113/0x200 fs/open.c:1364
do_sys_open fs/open.c:1370 [inline]
__do_sys_openat fs/open.c:1386 [inline]
__se_sys_openat fs/open.c:1381 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1381
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5800:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2689 [inline]
slab_free mm/slub.c:6251 [inline]
kfree+0x1c5/0x6c0 mm/slub.c:6566
process_one_work kernel/workqueue.c:3314 [inline]
process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Last potentially related work creation:
kasan_save_stack+0x3e/0x60 mm/kasan/common.c:57
kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:556
insert_work+0x3d/0x330 kernel/workqueue.c:2226
__queue_work+0xd1d/0x1090 kernel/workqueue.c:2393
queue_work_on+0x106/0x1d0 kernel/workqueue.c:2444
tty_release_struct+0xb8/0xd0 drivers/tty/tty_io.c:1692
tty_release+0xcb6/0x1710 drivers/tty/tty_io.c:1852
__fput+0x461/0xa70 fs/file_table.c:510
task_work_run+0x1d9/0x270 kernel/task_work.c:233
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
__exit_to_user_mode_loop kernel/entry/common.c:67 [inline]
exit_to_user_mode_loop+0x193/0x680 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x353/0x580 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888037076000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1152 bytes inside of
freed 2048-byte region [ffff888037076000, ffff888037076800)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37070
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff888037070811
flags: 0x80000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0080000000000040 ffff88813fe263c0 dead000000000100 dead000000000122
raw: 0000000000000000 0000100000080008 00000000f5000000 ffff888037070811
head: 0080000000000040 ffff88813fe263c0 dead000000000100 dead000000000122
head: 0000000000000000 0000100000080008 00000000f5000000 ffff888037070811
head: 0080000000000003 fffffffffffffe01 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 5805, tgid 5803 (syz.0.1), ts 93327144778, free_ts 93319793659
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x22d/0x280 mm/page_alloc.c:1853
prep_new_page mm/page_alloc.c:1861 [inline]
get_page_from_freelist+0x28b2/0x2930 mm/page_alloc.c:3941
__alloc_frozen_pages_noprof+0x18d/0x380 mm/page_alloc.c:5221
alloc_slab_page mm/slub.c:3278 [inline]
allocate_slab+0x77/0x660 mm/slub.c:3467
new_slab mm/slub.c:3525 [inline]
refill_objects+0x33c/0x3d0 mm/slub.c:7272
refill_sheaf mm/slub.c:2816 [inline]
__pcs_replace_empty_main+0x373/0x720 mm/slub.c:4652
alloc_from_pcs mm/slub.c:4750 [inline]
slab_alloc_node mm/slub.c:4884 [inline]
__do_kmalloc_node mm/slub.c:5295 [inline]
__kmalloc_node_track_caller_noprof+0x60b/0x7e0 mm/slub.c:5408
kmemdup_noprof+0x2b/0x70 mm/util.c:138
kmemdup_noprof include/linux/fortify-string.h:763 [inline]
neigh_sysctl_register+0xae/0xa90 net/core/neighbour.c:3861
addrconf_sysctl_register+0xb3/0x1c0 net/ipv6/addrconf.c:7379
ipv6_add_dev+0xd64/0x1400 net/ipv6/addrconf.c:460
addrconf_notify+0x771/0x1050 net/ipv6/addrconf.c:3662
notifier_call_chain+0x1ad/0x3d0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2287 [inline]
call_netdevice_notifiers net/core/dev.c:2301 [inline]
register_netdevice+0x18d5/0x1ed0 net/core/dev.c:11461
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1069 [inline]
nsim_create+0xbff/0x1170 drivers/net/netdevsim/netdev.c:1151
__nsim_dev_port_add+0x857/0xd30 drivers/net/netdevsim/dev.c:1509
page last free pid 5805 tgid 5803 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
__free_pages_prepare mm/page_alloc.c:1397 [inline]
__free_frozen_pages+0xfe5/0x10d0 mm/page_alloc.c:2938
__slab_free+0x252/0x2a0 mm/slub.c:5613
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x99/0x100 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x148/0x160 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x22/0x80 mm/kasan/common.c:350
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4570 [inline]
slab_alloc_node mm/slub.c:4899 [inline]
__kmalloc_cache_noprof+0x338/0x690 mm/slub.c:5415
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
kset_create lib/kobject.c:965 [inline]
kset_create_and_add+0x5a/0x180 lib/kobject.c:1008
register_queue_kobjects net/core/net-sysfs.c:2091 [inline]
netdev_register_kobject+0x1a2/0x310 net/core/net-sysfs.c:2347
register_netdevice+0x146d/0x1ed0 net/core/dev.c:11423
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1069 [inline]
nsim_create+0xbff/0x1170 drivers/net/netdevsim/netdev.c:1151
__nsim_dev_port_add+0x857/0xd30 drivers/net/netdevsim/dev.c:1509
nsim_dev_port_add_all+0x37/0xf0 drivers/net/netdevsim/dev.c:1570
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1622 [inline]
nsim_dev_reload_up+0x45f/0x7c0 drivers/net/netdevsim/dev.c:1058
devlink_reload+0x501/0x8d0 net/devlink/dev.c:475
devlink_nl_reload_doit+0xaaa/0xc80 net/devlink/dev.c:585
genl_family_rcv_msg_doit+0x22a/0x330 net/netlink/genetlink.c:1114
Memory state around the buggy address:
ffff888037076380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888037076400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888037076480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888037076500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888037076580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reply: The bug report describes a use-after-free (UAF) vulnerability in the `stop_tty` function within the TTY subsystem. The report is highly consistent and actionable, providing all three necessary stack traces: the bad memory access, the heap block allocation, and the heap block free stack.
### Analysis of the Stack Traces:
1. **Access Stack**: The UAF occurs in `stop_tty` (specifically in the inlined `__stop_tty` at `drivers/tty/tty_io.c:742`), which is called from `fn_hold` in `drivers/tty/vt/keyboard.c`. This is triggered by a keyboard event (`kbd_event` -> `kbd_keycode`) initiated by a user-space task (`syz.1.2/5837`) writing to an `evdev` device (`evdev_write`).
2. **Allocation Stack**: The `tty_struct` was allocated by task 5835 during a `tty_open` operation, which calls `tty_init_dev` and `alloc_tty_struct`.
3. **Free Stack**: The `tty_struct` was freed by a workqueue worker (task 5800) executing `release_one_tty`. The "Last potentially related work creation" stack confirms that this work was queued during `tty_release` (when the last file descriptor to the TTY was closed).
### Root Cause:
The root cause is a race condition between the TTY release process and the keyboard event handler. In `drivers/tty/vt/keyboard.c`, the functions `kbd_keycode` and `fn_hold` obtain a pointer to the `tty_struct` directly from `vc->port.tty` without taking a reference count (kref).
```c
// drivers/tty/vt/keyboard.c
tty = vc->port.tty;
...
(*k_handler[type])(vc, KVAL(keysym), !down); // calls fn_hold
```
While `release_tty` (called during `tty_release`) does call `con_shutdown` to set `vc->port.tty = NULL`, it does so just before dropping the final reference. If `kbd_keycode` or `fn_hold` reads the pointer just before it's cleared, and then the `tty_struct` is freed by the workqueue before the keyboard handler finishes using it, a UAF occurs.
### Consistency and Actionability:
- **Consistent Object**: All three stacks correctly refer to a `tty_struct` (allocated in `alloc_tty_struct`, freed in `free_tty_struct`).
- **Consistent Subsystem**: The bug is entirely contained within the TTY and VT (Virtual Terminal) subsystems.
- **Clear Mechanism**: The mechanism of the failure (race between `tty_release` and `kbd_event`) is well-supported by the provided stacks and the kernel source code.
- **Actionable**: The report provides enough information to identify the missing refcounting in `drivers/tty/vt/keyboard.c` as the likely fix (e.g., using `tty_port_tty_get()` instead of direct access).
The report is self-consistent and provides all the necessary information to root cause the bug.
|
| 5/2 |
2026/06/01 19:26 |
llm |
expert |
0m
Model:
Tokens:
input: 9310
output: 37
thoughts: 165
Thoughts: **Analyzing a KASAN Slab-Use-After-Free in `stop_tty`**
Okay, so I'm looking at a KASAN slab-use-after-free, specifically in `stop_tty`. The access itself is in `__stop_tty`, which, as I recall, is inlined within `stop_tty` β line 742 in `tty_io.c` to be exact. This looks like a classic race condition issue.
The allocation trace tells me that `alloc_tty_struct` is the culprit, coming from `tty_init_dev`. The freeing side is a bit more involved; `kfree` is happening from within a workqueue. The "Last potentially related work creation" stack is interesting because it points to `tty_release_struct`, which is called from `tty_release`. This is a pretty common pattern for this kind of TTY issue and immediately sets off some flags in my mind.
Now, let's dive into the code. My first step is to immediately examine lines 742 and 766 in `tty_io.c`. This is where the action is happening. I need to understand what's being accessed at that point, and then trace back from the allocation and release stacks to identify the race condition. Time to see what's happening.
|
| 6/2 |
2026/06/01 19:26 |
tool |
read-file |
0m
Args: map[File:drivers/tty/tty_io.c FirstLine:730 LineCount:50]
Results: map[Contents: 730: * @filp: file pointer of tty
731: *
732: * Return: true if the tty has been subject to a vhangup or a carrier loss
733: */
734: int tty_hung_up_p(struct file *filp)
735: {
736: return (filp && filp->f_op == &hung_up_tty_fops);
737: }
738: EXPORT_SYMBOL(tty_hung_up_p);
739:
740: void __stop_tty(struct tty_struct *tty)
741: {
742: if (tty->flow.stopped)
743: return;
744: tty->flow.stopped = true;
745: if (tty->ops->stop)
746: tty->ops->stop(tty);
747: }
748:
749: /**
750: * stop_tty - propagate flow control
751: * @tty: tty to stop
752: *
753: * Perform flow control to the driver. May be called on an already stopped
754: * device and will not re-call the &tty_driver->stop() method.
755: *
756: * This functionality is used by both the line disciplines for halting incoming
757: * flow and by the driver. It may therefore be called from any context, may be
758: * under the tty %atomic_write_lock but not always.
759: *
760: * Locking:
761: * flow.lock
762: */
763: void stop_tty(struct tty_struct *tty)
764: {
765: guard(spinlock_irqsave)(&tty->flow.lock);
766: __stop_tty(tty);
767: }
768: EXPORT_SYMBOL(stop_tty);
769:
770: void __start_tty(struct tty_struct *tty)
771: {
772: if (!tty->flow.stopped || tty->flow.tco_stopped)
773: return;
774: tty->flow.stopped = false;
775: if (tty->ops->start)
776: tty->ops->start(tty);
777: tty_wakeup(tty);
778: }
779:
]
|
| 7/2 |
2026/06/01 19:26 |
llm |
expert |
0m
Model:
Tokens:
input: 10512
output: 38
thoughts: 171
Thoughts: **Analyzing a TTY Flow Control Issue**
Okay, so I'm digging into this code, trying to understand a potential issue. The core of it seems to be around line 742, where it reads `tty->flow.stopped`. This is a pretty straightforward read of a member within a `tty_struct` object. Nothing immediately jumps out as problematic here, but let's dig deeper.
The allocation confirms it's a `tty_struct`. I see the allocation path is `alloc_tty_struct` which then calls `kzalloc_noprof`. Right, standard kernel allocation.
The real key, however, lies in the *free* path. Looking at the call stack, I see `tty_release` eventually leading to `tty_release_struct`, which queues a work item and ultimately calls `kfree`. That confirms it's a standard `tty_struct` being freed too. Aha! And the `kfree` is called from `process_one_work`.
Let me jump over to the `drivers/tty/tty_io.c` file and check `tty_release_struct` right away to confirm where it is actually freeing the object. Gotta check the work queue context to see if there's any tricky concurrency or timing issues.
|
| 8/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/tty_io.c FirstLine:1670 LineCount:30]
Results: map[Contents:1670: * @tty: tty device
1671: * @idx: index of the tty
1672: *
1673: * Performs the final steps to release and free a tty device. It is roughly the
1674: * reverse of tty_init_dev().
1675: */
1676: void tty_release_struct(struct tty_struct *tty, int idx)
1677: {
1678: /*
1679: * Ask the line discipline code to release its structures
1680: */
1681: tty_ldisc_release(tty);
1682:
1683: /* Wait for pending work before tty destruction commmences */
1684: tty_flush_works(tty);
1685:
1686: tty_debug_hangup(tty, "freeing structure\n");
1687: /*
1688: * The release_tty function takes care of the details of clearing
1689: * the slots and preserving the termios structure.
1690: */
1691: mutex_lock(&tty_mutex);
1692: release_tty(tty, idx);
1693: mutex_unlock(&tty_mutex);
1694: }
1695: EXPORT_SYMBOL_GPL(tty_release_struct);
1696:
1697: /**
1698: * tty_release - vfs callback for close
1699: * @inode: inode of tty
]
|
| 9/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 11423
output: 38
thoughts: 51
Thoughts: **Analyzing a Suspect Stack Trace**
Okay, so the stack trace points directly to `tty_release_struct+0xb8/0xd0`. That's interesting. I know that function from the kernel internals. Now, I vaguely recall reading documentation on the tty subsystem and, from what I remember, `tty_release_struct` seems to call `release_tty`. Let's confirm that. I'm going to pull up the source code for `release_tty` and see what's really happening in that area. This seems like it's pointing to a resource release issue, but I need to understand the control flow better.
|
| 10/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/tty_io.c FirstLine:1640 LineCount:30]
Results: map[Contents:1640: * @tty: tty device
1641: *
1642: * Performs the final steps to release and free a tty device. It is the same as
1643: * tty_release_struct() except that it also resets %TTY_PORT_KOPENED flag on
1644: * @tty->port.
1645: */
1646: void tty_kclose(struct tty_struct *tty)
1647: {
1648: /*
1649: * Ask the line discipline code to release its structures
1650: */
1651: tty_ldisc_release(tty);
1652:
1653: /* Wait for pending work before tty destruction commences */
1654: tty_flush_works(tty);
1655:
1656: tty_debug_hangup(tty, "freeing structure\n");
1657: /*
1658: * The release_tty function takes care of the details of clearing
1659: * the slots and preserving the termios structure.
1660: */
1661: mutex_lock(&tty_mutex);
1662: tty_port_set_kopened(tty->port, 0);
1663: release_tty(tty, tty->index);
1664: mutex_unlock(&tty_mutex);
1665: }
1666: EXPORT_SYMBOL_GPL(tty_kclose);
1667:
1668: /**
1669: * tty_release_struct - release a tty struct
]
|
| 11/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 12097
output: 36
thoughts: 17
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience:
**Tracing `release_tty`**
Alright, I need to get to the bottom of this `release_tty` function. Clearly, I'm going to need to track down its definition and understand its precise function within the larger context of, presumably, terminal management. My initial approach will be to begin by locating the source code where it is defined, which may be a header file or within a specific driver. From there, I'll examine the surrounding code to determine its purpose. This process will include considering what data structures it might operate on (e.g., `tty` structures, process control blocks), any locking mechanisms employed (mutexes, spinlocks), and the specific conditions under which it's called. Are we talking about a clean-up function during a session termination, or something more proactive? Is it a key piece of the resource management puzzle, or simply a convenience wrapper? Understanding the parameters passed to the function, and any return values, will be crucial in building a complete mental model of its behavior. Ultimately, I'll need to confirm any assumptions with a cursory reading of the surrounding comments, if present.
|
| 12/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:release_tty]
Results: map[SourceCode:1561: /**
1562: * release_tty - release tty structure memory
1563: * @tty: tty device release
1564: * @idx: index of the tty device release
1565: *
1566: * Release both @tty and a possible linked partner (think pty pair),
1567: * and decrement the refcount of the backing module.
1568: *
1569: * Locking:
1570: * tty_mutex
1571: * takes the file list lock internally when working on the list of ttys
1572: * that the driver keeps.
1573: */
1574: static void release_tty(struct tty_struct *tty, int idx)
1575: {
1576: /* This should always be true but check for the moment */
1577: WARN_ON(tty->index != idx);
1578: WARN_ON(!mutex_is_locked(&tty_mutex));
1579: if (tty->ops->shutdown)
1580: tty->ops->shutdown(tty);
1581: tty_save_termios(tty);
1582: tty_driver_remove_tty(tty->driver, tty);
1583: if (tty->port)
1584: tty->port->itty = NULL;
1585: if (tty->link)
1586: tty->link->port->itty = NULL;
1587: if (tty->port)
1588: tty_buffer_cancel_work(tty->port);
1589: if (tty->link)
1590: tty_buffer_cancel_work(tty->link->port);
1591:
1592: tty_kref_put(tty->link);
1593: tty_kref_put(tty);
1594: }
SourceFile:drivers/tty/tty_io.c]
|
| 13/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 12946
output: 39
thoughts: 49
Thoughts: **Examining the Terminal Release Sequence**
Okay, so the `release_tty` function kicks off the process with a call to `tty_kref_put(tty)`. My mind immediately jumps to the lifecycle here: I know that `tty_kref_put` is responsible for decrementing the reference count of the terminal structure. The ultimate goal, as I see it, is that, *eventually*, if the reference count drops to zero, `free_tty_struct` should be called to properly deallocate the terminal structure and associated resources. It's a classic refcounting pattern, but I need to be sure the implementation is solid.
Therefore, the next logical step is to dive into `tty_kref_put` itself. I need to understand how it handles the reference count, what other actions it takes, and *crucially*, confirm that the path to `free_tty_struct` is properly orchestrated within that function.
|
| 14/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:tty_kref_put]
Results: map[SourceCode:1547: /**
1548: * tty_kref_put - release a tty kref
1549: * @tty: tty device
1550: *
1551: * Release a reference to the @tty device and if need be let the kref layer
1552: * destruct the object for us.
1553: */
1554: void tty_kref_put(struct tty_struct *tty)
1555: {
1556: if (tty)
1557: kref_put(&tty->kref, queue_release_one_tty);
1558: }
SourceFile:drivers/tty/tty_io.c]
|
| 15/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 13440
output: 40
thoughts: 25
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Analyzing `queue_release_one_tty`**
Alright, I see we're diving into the `queue_release_one_tty` function. That function name immediately gives me some context, and it's what I'd expect to see here. I'm thinking, "Let's dissect this. What is it doing, specifically with a TTY?" I'm expecting this function is related to handling the release of resources tied to a single TTY device within the queuing system. I'll need to look deeper into the implementation to understand the intricacies of the locking involved, the signaling mechanisms used, and how it handles potential race conditions. Itβs the details that matter here β are we talking about a simple dequeue and resource deallocation, or is there more complexity related to shutdown procedures and pending I/O requests? The devil, as always, is in those details. My focus will be on the critical sections and how they're managed.
|
| 16/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:queue_release_one_tty]
Results: map[SourceCode:1536: static void queue_release_one_tty(struct kref *kref)
1537: {
1538: struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
1539:
1540: /* The hangup queue is now free so we can reuse it rather than
1541: * waste a chunk of memory for each port.
1542: */
1543: INIT_WORK(&tty->hangup_work, release_one_tty);
1544: schedule_work(&tty->hangup_work);
1545: }
SourceFile:drivers/tty/tty_io.c]
|
| 17/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 13930
output: 38
thoughts: 8
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Delving into the `release_one_tty` Function**
Alright, so I'm thinking about this `release_one_tty` function. My initial gut reaction is to consider the broader context. What's the system's state leading up to this point? I need to understand what resources are being held, which terminal this relates to, and why this release is even happening. Is this part of a graceful shutdown, a process termination, or something else entirely? The subtleties here are critical. We're dealing with terminal management, so Iβm immediately considering potential race conditions. Multiple processes vying for the same TTY? Deadlocks? I need to look at the locking mechanisms used β mutexes, semaphores, whatever the architecture implements β and how they interact with this function. Specifically, are we correctly handling interrupt scenarios within the critical sections? A missed unlock could be catastrophic.
I am assuming this is part of some TTY subsystem within an operating system.
Iβm also wondering about error handling. What happens if the release fails? Does it leave the TTY in a corrupted state? Does it affect other related TTYs? Is there a retry mechanism, and if so, how intelligent is it? A simple "return an error code" is not good enough. Weβre aiming for a robust design. This means properly cleaning up. Consider that you may need to reset terminal attributes, signal the controlling process, and update the internal TTY data structures. What about device-specific nuances? I'm sure there are platform-specific variations that require special handling, especially when it comes to the lower-level hardware interaction and drivers, which I will need to consider.
Iβm mentally dissecting the data structures involved, and the implications of this action. What exactly does βreleasingβ a TTY mean in this context? Does it imply a simple ownership relinquishment, or a more comprehensive reset and de-allocation of resources? The precise meaning of "release" will dictate what's necessary, particularly if there are lingering processes or signals that we need to clean up and account for.
I also think it is likely that this is an important point in the life-cycle of a particular TTY, and that as such, all potential race conditions and locking requirements need to be carefully considered.
|
| 18/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:release_one_tty]
Results: map[SourceCode:1499: /**
1500: * release_one_tty - release tty structure memory
1501: * @work: work of tty we are obliterating
1502: *
1503: * Releases memory associated with a tty structure, and clears out the
1504: * driver table slots. This function is called when a device is no longer
1505: * in use. It also gets called when setup of a device fails.
1506: *
1507: * Locking:
1508: * takes the file list lock internally when working on the list of ttys
1509: * that the driver keeps.
1510: *
1511: * This method gets called from a work queue so that the driver private
1512: * cleanup ops can sleep (needed for USB at least)
1513: */
1514: static void release_one_tty(struct work_struct *work)
1515: {
1516: struct tty_struct *tty =
1517: container_of(work, struct tty_struct, hangup_work);
1518: struct tty_driver *driver = tty->driver;
1519: struct module *owner = driver->owner;
1520:
1521: if (tty->ops->cleanup)
1522: tty->ops->cleanup(tty);
1523:
1524: tty_driver_kref_put(driver);
1525: module_put(owner);
1526:
1527: spin_lock(&tty->files_lock);
1528: list_del_init(&tty->tty_files);
1529: spin_unlock(&tty->files_lock);
1530:
1531: put_pid(tty->ctrl.pgrp);
1532: put_pid(tty->ctrl.session);
1533: free_tty_struct(tty);
1534: }
SourceFile:drivers/tty/tty_io.c]
|
| 19/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 15048
output: 38
thoughts: 8
Thoughts: Okay, here's my summary, presented as a stream of thought:
**Understanding the `free_tty_struct` Function**
Alright, let's break this down. My mind immediately jumps to `free_tty_struct`, and what that implies in the grand scheme of things. It's clear this is about managing terminal structures within the kernel, specifically freeing up the memory allocated to a `tty_struct`. This is a crucial function; it's the kernel's way of cleaning up after a terminal session has ended, or a virtual terminal is no longer needed. So, the kernel must release the memory resources used by a specific TTY structure and associated resources.
I'm thinking about the implications. What exactly needs to be cleaned up? Well, first off, the associated memory for the `tty_struct` itself. But it's almost certainly more than just the struct. I bet there are buffers, FIFOs, and other data structures related to that specific tty instance that also need to be deallocated. We can't have memory leaks in the kernel, and the function's job is to ensure everything tied to that tty is handled correctly.
I'm considering how this fits in with other tty management routines. Is it called directly by other functions that handle terminal sessions? Is there a reference counter mechanism involved? What about race conditions? This likely needs to be carefully synchronized to avoid corrupting data or memory. I can see the potential for a lot of nasty bugs if this isn't handled with care.
My attention is also drawn to how this function might handle resources. Does it call other memory management functions like `kfree()`? Does it need to release resources like line disciplines, or handle shutdown procedures for the tty? What about signal handling? I'm picturing how this routine interacts with the other aspects of the TTY system. The function is likely part of the TTY cleanup process which ensures data structures are deallocated.
|
| 20/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:free_tty_struct]
Results: map[SourceCode: 161: /**
162: * free_tty_struct - free a disused tty
163: * @tty: tty struct to free
164: *
165: * Free the write buffers, tty queue and tty memory itself.
166: *
167: * Locking: none. Must be called after tty is definitely unused
168: */
169: static void free_tty_struct(struct tty_struct *tty)
170: {
171: tty_ldisc_deinit(tty);
172: put_device(tty->dev);
173: kvfree(tty->write_buf);
174: kfree(tty);
175: }
SourceFile:drivers/tty/tty_io.c]
|
| 21/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 15747
output: 38
thoughts: 285
Thoughts: **Analyzing a TTY Release in the Kernel**
Okay, so I'm looking at this memory corruption report and I've got a free stack here:
```
Freed by task 5800:
...
kfree+0x1c5/0x6c0 mm/slub.c:6566
process_one_work kernel/workqueue.c:3314 [inline]
...
```
Right, so `kfree` is happening, and it's from a workqueue β `process_one_work` in `kernel/workqueue.c`. That seems to match up with what I'm seeing with `release_one_tty` being called from a workqueue. Okay.
Now, let's look at this "Last potentially related work creation" stack:
```
Last potentially related work creation:
...
insert_work+0x3d/0x330 kernel/workqueue.c:2226
__queue_work+0xd1d/0x1090 kernel/workqueue.c:2393
queue_work_on+0x106/0x1d0 kernel/workqueue.c:2444
tty_release_struct+0xb8/0xd0 drivers/tty/tty_io.c:1692
tty_release+0xcb6/0x1710 drivers/tty/tty_io.c:1852
...
```
Hold on, *`tty_release_struct`* at line 1692 in `drivers/tty/tty_io.c`... That seems significant, given the context. I'm going to need to dig deeper into that function.
|
| 22/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/tty_io.c FirstLine:1680 LineCount:20]
Results: map[Contents:1680: */
1681: tty_ldisc_release(tty);
1682:
1683: /* Wait for pending work before tty destruction commmences */
1684: tty_flush_works(tty);
1685:
1686: tty_debug_hangup(tty, "freeing structure\n");
1687: /*
1688: * The release_tty function takes care of the details of clearing
1689: * the slots and preserving the termios structure.
1690: */
1691: mutex_lock(&tty_mutex);
1692: release_tty(tty, idx);
1693: mutex_unlock(&tty_mutex);
1694: }
1695: EXPORT_SYMBOL_GPL(tty_release_struct);
1696:
1697: /**
1698: * tty_release - vfs callback for close
1699: * @inode: inode of tty
]
|
| 23/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 16746
output: 38
thoughts: 463
Thoughts: **Analyzing a Kernel Crash and TTY Release**
Okay, so I'm tracing this kernel crash, and the stack trace points to a slab-use-after-free error within `stop_tty`. The address listed for the `release_tty` call in line 1692 checks out - it calls `tty_kref_put`, then `kref_put`, then `queue_release_one_tty`, ultimately leading to `schedule_work` and then `queue_work_on`. The call stack makes perfect sense.
Now, let's look closer at the access stack itself, that's where the real insight is. It seems the problematic access is triggered by `kbd_event`, which calls `kbd_keycode`, eventually leading to `stop_tty`. I need to examine the source code for `drivers/tty/vt/keyboard.c`, specifically lines 1565 and 1583. Those are the key locations for `kbd_keycode` and `kbd_event` respectively, where the `stop_tty` call is potentially triggered. Understanding the control flow within those functions should reveal the root cause of this use-after-free issue.
|
| 24/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:1550 LineCount:50]
Results: map[Contents:1550: key_map = key_maps[shift_final ^ BIT(KG_SHIFT)];
1551: if (key_map)
1552: keysym = key_map[keycode];
1553: }
1554: }
1555:
1556: param.value = keysym;
1557: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1558: KBD_KEYSYM, ¶m);
1559: if (rc == NOTIFY_STOP)
1560: return;
1561:
1562: if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
1563: return;
1564:
1565: (*k_handler[type])(vc, KVAL(keysym), !down);
1566:
1567: param.ledstate = kbd->ledflagstate;
1568: atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, ¶m);
1569:
1570: if (type != KT_SLOCK)
1571: kbd->slockstate = 0;
1572: }
1573:
1574: static void kbd_event(struct input_handle *handle, unsigned int event_type,
1575: unsigned int event_code, int value)
1576: {
1577: /* We are called with interrupts disabled, just take the lock */
1578: scoped_guard(spinlock, &kbd_event_lock) {
1579: if (event_type == EV_MSC && event_code == MSC_RAW &&
1580: kbd_is_hw_raw(handle->dev))
1581: kbd_rawcode(value);
1582: if (event_type == EV_KEY && event_code <= KEY_MAX)
1583: kbd_keycode(event_code, value, kbd_is_hw_raw(handle->dev));
1584: }
1585:
1586: tasklet_schedule(&keyboard_tasklet);
1587: do_poke_blanked_console = 1;
1588: schedule_console_callback();
1589: }
1590:
1591: static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
1592: {
1593: if (test_bit(EV_SND, dev->evbit))
1594: return true;
1595:
1596: if (test_bit(EV_KEY, dev->evbit)) {
1597: if (find_next_bit(dev->keybit, BTN_MISC, KEY_RESERVED) <
1598: BTN_MISC)
1599: return true;
]
|
| 25/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 18303
output: 32
thoughts: 117
Thoughts: **Debugging a `stop_tty` Call**
Okay, so I'm digging into this stack trace, and it looks like `stop_tty` is being called from this line: `(*k_handler[type])(vc, KVAL(keysym), !down);`. That line is the key, and I know from the trace that's where the problem is originating. One of these `k_handler` functions is clearly the culprit. Since the stack points there, I have to figure out which one. The type is given as `KTYP(keysym)`.
Hmm, this is a bit too much searching, let me just search the source for `stop_tty` and see where it's being called from in relation to key handlers. Let's see if I can narrow this down by grepping for that function in `drivers/tty/vt/keyboard.c`. It's likely related to keyboard input, and this feels like a keyboard event being mismanaged. Time to dig in there.
|
| 26/2 |
2026/06/01 19:27 |
tool |
grepper |
0m
Args: map[Expression:stop_tty PathPrefix:drivers/tty/vt/keyboard.c]
Results: map[Output:drivers/tty/vt/keyboard.c=510=static void fn_hold(struct vc_data *vc)
--
drivers/tty/vt/keyboard.c-517- /*
drivers/tty/vt/keyboard.c:518: * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty);
drivers/tty/vt/keyboard.c-519- * these routines are also activated by ^S/^Q.
--
drivers/tty/vt/keyboard.c-524- else
drivers/tty/vt/keyboard.c:525: stop_tty(tty);
drivers/tty/vt/keyboard.c-526-}
--
drivers/tty/vt/keyboard.c=1232=void vt_set_led_state(unsigned int console, int leds)
--
drivers/tty/vt/keyboard.c-1245- * FIXME: We eventually need to hold the kbd lock here to protect
drivers/tty/vt/keyboard.c:1246: * the LED updating. We can't do it yet because fn_hold calls stop_tty
drivers/tty/vt/keyboard.c-1247- * and start_tty under the kbd_event_lock, while normal tty paths
]
|
| 27/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 18992
output: 36
thoughts: 22
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the `fn_hold` Function**
Okay, so I'm digging into this code, and it looks like the `fn_hold` function is calling `stop_tty`. My first thought is to understand the context of `fn_hold`. What's it doing? Is it a signal handler, a part of the terminal control logic, or something else entirely? The connection to `stop_tty` is what's piquing my interest. I need to determine *why* it's calling `stop_tty`. Is it for process suspension, terminal input handling, or perhaps even resource management? I'll trace through `fn_hold` and see where this call is made, what arguments are passed (if any), and how the overall state of the program is affected. The interplay here is crucial. I want to understand the implication of this call in different execution paths. Time to dive deeper and see what's going on.
|
| 28/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/vt/keyboard.c Name:fn_hold]
Results: map[SourceCode: 510: static void fn_hold(struct vc_data *vc)
511: {
512: struct tty_struct *tty = vc->port.tty;
513:
514: if (rep || !tty)
515: return;
516:
517: /*
518: * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty);
519: * these routines are also activated by ^S/^Q.
520: * (And SCROLLOCK can also be set by the ioctl KDSKBLED.)
521: */
522: if (tty->flow.stopped)
523: start_tty(tty);
524: else
525: stop_tty(tty);
526: }
SourceFile:drivers/tty/vt/keyboard.c]
|
| 29/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 19531
output: 38
thoughts: 95
Thoughts: Here's my thought process, as it stands:
**Navigating the Codebase**
Okay, so I'm digging into `fn_hold`, and it looks like it pulls the `tty` from `vc->port.tty`. Straightforward enough. I see that `vc` is defined as a `struct vc_data`, which makes sense in this context. But now, I'm diving deeper into `kbd_keycode`, and I see this line:
```c
1565: (*k_handler[type])(vc, KVAL(keysym), !down);
```
Wait a second... where *does* that `vc` variable come from within `kbd_keycode`? I need to understand the scope and origin of that `vc`. This is critical. I can't just assume it's magically there. It's too important of a variable. I'm going to need to trace back and get the full picture of the function to be able to understand the variable. I need more context to understand how `kbd_keycode` gets its `vc` and, therefore, what is happening in the current scenario.
|
| 30/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:1510 LineCount:60]
Results: map[Contents:1510: unsigned char type = KTYP(plain);
1511:
1512: if (type >= 0xf0 && (type - 0xf0 == KT_CUR || type - 0xf0 == KT_CSI))
1513: key_map = key_maps[0];
1514: }
1515:
1516: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1517: KBD_KEYCODE, ¶m);
1518: if (rc == NOTIFY_STOP || !key_map) {
1519: atomic_notifier_call_chain(&keyboard_notifier_list,
1520: KBD_UNBOUND_KEYCODE, ¶m);
1521: do_compute_shiftstate();
1522: kbd->slockstate = 0;
1523: return;
1524: }
1525:
1526: if (keycode < NR_KEYS)
1527: keysym = key_map[keycode];
1528: else if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8)
1529: keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1));
1530: else
1531: return;
1532:
1533: type = KTYP(keysym);
1534:
1535: if (type < 0xf0) {
1536: param.value = keysym;
1537: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1538: KBD_UNICODE, ¶m);
1539: if (rc != NOTIFY_STOP)
1540: if (down && !(raw_mode || kbd->kbdmode == VC_OFF))
1541: k_unicode(vc, keysym, !down);
1542: return;
1543: }
1544:
1545: type -= 0xf0;
1546:
1547: if (type == KT_LETTER) {
1548: type = KT_LATIN;
1549: if (vc_kbd_led(kbd, VC_CAPSLOCK)) {
1550: key_map = key_maps[shift_final ^ BIT(KG_SHIFT)];
1551: if (key_map)
1552: keysym = key_map[keycode];
1553: }
1554: }
1555:
1556: param.value = keysym;
1557: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1558: KBD_KEYSYM, ¶m);
1559: if (rc == NOTIFY_STOP)
1560: return;
1561:
1562: if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
1563: return;
1564:
1565: (*k_handler[type])(vc, KVAL(keysym), !down);
1566:
1567: param.ledstate = kbd->ledflagstate;
1568: atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, ¶m);
1569:
]
|
| 31/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 20849
output: 38
thoughts: 38
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm an expert in this code:
**Debugging a Potentially Uninitialized Variable**
Alright, I'm trying to follow this code, but something's tripping me up. I'm looking for where `vc` is defined, and I'm not seeing it explicitly declared anywhere obvious. The fact that I'm not finding it suggests it must be a local variable, probably within the scope of the `kbd_keycode` function. To confirm my suspicion and see how it's being used, I need to go back and examine the beginning of that function's definition. Let's trace back to the function definition of `kbd_keycode` and figure out how `vc` is being handled.
|
| 32/2 |
2026/06/01 19:27 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:1440 LineCount:50]
Results: map[Contents:1440:
1441: kbd = &kbd_table[vc->vc_num];
1442:
1443: #ifdef CONFIG_SPARC
1444: if (keycode == KEY_STOP)
1445: sparc_l1_a_state = down;
1446: #endif
1447:
1448: rep = (down == 2);
1449:
1450: raw_mode = (kbd->kbdmode == VC_RAW);
1451: if (raw_mode && !hw_raw)
1452: if (emulate_raw(vc, keycode, !down << 7))
1453: if (keycode < BTN_MISC && printk_ratelimit())
1454: pr_warn("can't emulate rawmode for keycode %d\n",
1455: keycode);
1456:
1457: #ifdef CONFIG_SPARC
1458: if (keycode == KEY_A && sparc_l1_a_state) {
1459: sparc_l1_a_state = false;
1460: sun_do_break();
1461: }
1462: #endif
1463:
1464: if (kbd->kbdmode == VC_MEDIUMRAW) {
1465: /*
1466: * This is extended medium raw mode, with keys above 127
1467: * encoded as 0, high 7 bits, low 7 bits, with the 0 bearing
1468: * the 'up' flag if needed. 0 is reserved, so this shouldn't
1469: * interfere with anything else. The two bytes after 0 will
1470: * always have the up flag set not to interfere with older
1471: * applications. This allows for 16384 different keycodes,
1472: * which should be enough.
1473: */
1474: if (keycode < 128) {
1475: put_queue(vc, keycode | (!down << 7));
1476: } else {
1477: put_queue(vc, !down << 7);
1478: put_queue(vc, (keycode >> 7) | BIT(7));
1479: put_queue(vc, keycode | BIT(7));
1480: }
1481: raw_mode = true;
1482: }
1483:
1484: assign_bit(keycode, key_down, down);
1485:
1486: if (rep &&
1487: (!vc_kbd_mode(kbd, VC_REPEAT) ||
1488: (tty && !L_ECHO(tty) && tty_chars_in_buffer(tty)))) {
1489: /*
]
|
| 33/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 21877
output: 36
thoughts: 57
Thoughts: Okay, let me think this through.
**Analyzing the Keyboard Input Function Signature**
Alright, I'm taking a look at this `kbd_keycode` function. The signature is:
```c
static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
```
Hmm... I'm a little surprised. I was expecting to see a `vc` argument in there, usually a virtual console identifier is included in these keyboard input functions. I'll double-check this signature just to be absolutely certain. It's easy to miss something the first time around. Need to make sure I haven't misread it. I'll go back and examine it carefully again.
|
| 34/2 |
2026/06/01 19:27 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/tty/vt/keyboard.c Name:kbd_keycode]
Results: map[SourceCode:1423: static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
1424: {
1425: struct vc_data *vc = vc_cons[fg_console].d;
1426: unsigned short keysym, *key_map;
1427: unsigned char type;
1428: bool raw_mode;
1429: struct tty_struct *tty;
1430: int shift_final;
1431: struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down };
1432: int rc;
1433:
1434: tty = vc->port.tty;
1435:
1436: if (tty && (!tty->driver_data)) {
1437: /* No driver data? Strange. Okay we fix it then. */
1438: tty->driver_data = vc;
1439: }
1440:
1441: kbd = &kbd_table[vc->vc_num];
1442:
1443: #ifdef CONFIG_SPARC
1444: if (keycode == KEY_STOP)
1445: sparc_l1_a_state = down;
1446: #endif
1447:
1448: rep = (down == 2);
1449:
1450: raw_mode = (kbd->kbdmode == VC_RAW);
1451: if (raw_mode && !hw_raw)
1452: if (emulate_raw(vc, keycode, !down << 7))
1453: if (keycode < BTN_MISC && printk_ratelimit())
1454: pr_warn("can't emulate rawmode for keycode %d\n",
1455: keycode);
1456:
1457: #ifdef CONFIG_SPARC
1458: if (keycode == KEY_A && sparc_l1_a_state) {
1459: sparc_l1_a_state = false;
1460: sun_do_break();
1461: }
1462: #endif
1463:
1464: if (kbd->kbdmode == VC_MEDIUMRAW) {
1465: /*
1466: * This is extended medium raw mode, with keys above 127
1467: * encoded as 0, high 7 bits, low 7 bits, with the 0 bearing
1468: * the 'up' flag if needed. 0 is reserved, so this shouldn't
1469: * interfere with anything else. The two bytes after 0 will
1470: * always have the up flag set not to interfere with older
1471: * applications. This allows for 16384 different keycodes,
1472: * which should be enough.
1473: */
1474: if (keycode < 128) {
1475: put_queue(vc, keycode | (!down << 7));
1476: } else {
1477: put_queue(vc, !down << 7);
1478: put_queue(vc, (keycode >> 7) | BIT(7));
1479: put_queue(vc, keycode | BIT(7));
1480: }
1481: raw_mode = true;
1482: }
1483:
1484: assign_bit(keycode, key_down, down);
1485:
1486: if (rep &&
1487: (!vc_kbd_mode(kbd, VC_REPEAT) ||
1488: (tty && !L_ECHO(tty) && tty_chars_in_buffer(tty)))) {
1489: /*
1490: * Don't repeat a key if the input buffers are not empty and the
1491: * characters get aren't echoed locally. This makes key repeat
1492: * usable with slow applications and under heavy loads.
1493: */
1494: return;
1495: }
1496:
1497: param.shift = shift_final = (shift_state | kbd->slockstate) ^ kbd->lockstate;
1498: param.ledstate = kbd->ledflagstate;
1499: key_map = key_maps[shift_final];
1500:
1501: /*
1502: * Fall back to the plain map if modifiers are active, the modifier-
1503: * specific map is missing or has no entry, and the plain map has a
1504: * modifier-aware key type (KT_CUR or KT_CSI). These handlers encode
1505: * the modifier state into the emitted escape sequence.
1506: */
1507: if (shift_final && keycode < NR_KEYS &&
1508: (!key_map || key_map[keycode] == K_HOLE) && key_maps[0]) {
1509: unsigned short plain = key_maps[0][keycode];
1510: unsigned char type = KTYP(plain);
1511:
1512: if (type >= 0xf0 && (type - 0xf0 == KT_CUR || type - 0xf0 == KT_CSI))
1513: key_map = key_maps[0];
1514: }
1515:
1516: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1517: KBD_KEYCODE, ¶m);
1518: if (rc == NOTIFY_STOP || !key_map) {
1519: atomic_notifier_call_chain(&keyboard_notifier_list,
1520: KBD_UNBOUND_KEYCODE, ¶m);
1521: do_compute_shiftstate();
1522: kbd->slockstate = 0;
1523: return;
1524: }
1525:
1526: if (keycode < NR_KEYS)
1527: keysym = key_map[keycode];
1528: else if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8)
1529: keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1));
1530: else
1531: return;
1532:
1533: type = KTYP(keysym);
1534:
1535: if (type < 0xf0) {
1536: param.value = keysym;
1537: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1538: KBD_UNICODE, ¶m);
1539: if (rc != NOTIFY_STOP)
1540: if (down && !(raw_mode || kbd->kbdmode == VC_OFF))
1541: k_unicode(vc, keysym, !down);
1542: return;
1543: }
1544:
1545: type -= 0xf0;
1546:
1547: if (type == KT_LETTER) {
1548: type = KT_LATIN;
1549: if (vc_kbd_led(kbd, VC_CAPSLOCK)) {
1550: key_map = key_maps[shift_final ^ BIT(KG_SHIFT)];
1551: if (key_map)
1552: keysym = key_map[keycode];
1553: }
1554: }
1555:
1556: param.value = keysym;
1557: rc = atomic_notifier_call_chain(&keyboard_notifier_list,
1558: KBD_KEYSYM, ¶m);
1559: if (rc == NOTIFY_STOP)
1560: return;
1561:
1562: if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
1563: return;
1564:
1565: (*k_handler[type])(vc, KVAL(keysym), !down);
1566:
1567: param.ledstate = kbd->ledflagstate;
1568: atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, ¶m);
1569:
1570: if (type != KT_SLOCK)
1571: kbd->slockstate = 0;
1572: }
SourceFile:drivers/tty/vt/keyboard.c]
|
| 35/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 24504
output: 36
thoughts: 445
Thoughts: **Analyzing a Potential Race Condition in `kbd_keycode`**
Okay, so I'm looking at this `kbd_keycode` function and immediately see a potential issue. It retrieves a virtual console data structure (`vc`) using `vc_cons[fg_console].d` and then extracts the `tty` pointer from `vc->port.tty`. The troublesome part is that `fn_hold` also relies on this same `tty` pointer.
The real problem arises because `vc->port.tty` might be freed while `kbd_keycode` is actively running. Looking at the call chain, `kbd_event` (which calls `kbd_keycode` at some point) is triggered through `input_handle_events_default`, down to `evdev_write`. This entire sequence is happening within the process context of some task, specifically `syz.1.2/5837` in this case.
Now, the crucial free action occurred in a separate task β task 5800, which is running as a workqueue worker. This particular work was queued up by `tty_release` initiated from task 5835 (or a similar one). The timing is the problem: the free happens asynchronously to the use in `kbd_keycode`.
However, there's a saving grace... at least potentially. I see that `kbd_event` takes the `kbd_event_lock` spinlock. But `tty_release` doesn't seem to be acquiring that same lock. So the lock probably does not help here.
Now, the core question: does `vc->port.tty` get cleared when the tty is released? Examining `release_tty`, I see that `tty->port->itty` is indeed set to `NULL` if a port is present. But we are looking at `vc->port.tty`, not `tty->port->itty`. Are these related? This is where it gets interesting because `kbd_keycode` uses `vc->port.tty`. Is `vc->port` the same as `tty->port`?
For a VT, `vc` contains a `struct tty_port port` member, which makes it all make sense.
This looks like a race condition: `tty` is freed, but the lock is not sufficient.
|
| 36/2 |
2026/06/01 19:27 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:drivers/tty/vt/keyboard.c Name:vc_data]
Results: map[Fields:[map[Name:port OffsetBits:0 SizeBits:8576] map[Name:state OffsetBits:8576 SizeBits:160] map[Name:saved_state OffsetBits:8736 SizeBits:160] map[Name:vc_num OffsetBits:8896 SizeBits:16] map[Name:vc_cols OffsetBits:8928 SizeBits:32] map[Name:vc_rows OffsetBits:8960 SizeBits:32] map[Name:vc_size_row OffsetBits:8992 SizeBits:32] map[Name:vc_scan_lines OffsetBits:9024 SizeBits:32] map[Name:vc_cell_height OffsetBits:9056 SizeBits:32] map[Name:vc_origin OffsetBits:9088 SizeBits:64] map[Name:vc_scr_end OffsetBits:9152 SizeBits:64] map[Name:vc_visible_origin OffsetBits:9216 SizeBits:64] map[Name:vc_top OffsetBits:9280 SizeBits:32] map[Name:vc_bottom OffsetBits:9312 SizeBits:32] map[Name:vc_sw OffsetBits:9344 SizeBits:64] map[Name:vc_screenbuf OffsetBits:9408 SizeBits:64] map[Name:vc_screenbuf_size OffsetBits:9472 SizeBits:32] map[Name:vc_mode OffsetBits:9504 SizeBits:8] map[Name:vc_attr OffsetBits:9512 SizeBits:8] map[Name:vc_def_color OffsetBits:9520 SizeBits:8] map[Name:vc_ulcolor OffsetBits:9528 SizeBits:8] map[Name:vc_itcolor OffsetBits:9536 SizeBits:8] map[Name:vc_halfcolor OffsetBits:9544 SizeBits:8] map[Name:vc_cursor_type OffsetBits:9568 SizeBits:32] map[Name:vc_complement_mask OffsetBits:9600 SizeBits:16] map[Name:vc_s_complement_mask OffsetBits:9616 SizeBits:16] map[Name:vc_pos OffsetBits:9664 SizeBits:64] map[Name:vc_hi_font_mask OffsetBits:9728 SizeBits:16] map[Name:vc_font OffsetBits:9792 SizeBits:192] map[Name:vc_video_erase_char OffsetBits:9984 SizeBits:16] map[Name:vc_state OffsetBits:10016 SizeBits:32] map[Name:vc_npar OffsetBits:10048 SizeBits:32] map[Name:vc_par OffsetBits:10080 SizeBits:512] map[Name:vt_mode OffsetBits:10592 SizeBits:64] map[Name:vt_pid OffsetBits:10688 SizeBits:64] map[Name:vt_newvt OffsetBits:10752 SizeBits:32] map[Name:paste_wait OffsetBits:10816 SizeBits:1152] map[Name:vc_disp_ctrl OffsetBits:11968 SizeBits:1] map[Name:vc_toggle_meta OffsetBits:11969 SizeBits:1] map[Name:vc_decscnm OffsetBits:11970 SizeBits:1] map[Name:vc_decom OffsetBits:11971 SizeBits:1] map[Name:vc_decawm OffsetBits:11972 SizeBits:1] map[Name:vc_deccm OffsetBits:11973 SizeBits:1] map[Name:vc_decim OffsetBits:11974 SizeBits:1] map[Name:vc_priv OffsetBits:11975 SizeBits:3] map[Name:vc_need_wrap OffsetBits:11978 SizeBits:1] map[Name:vc_can_do_color OffsetBits:11979 SizeBits:1] map[Name:vc_report_mouse OffsetBits:11980 SizeBits:2] map[Name:vc_bracketed_paste OffsetBits:11982 SizeBits:1] map[Name:vc_utf OffsetBits:11983 SizeBits:1] map[Name:vc_utf_count OffsetBits:11984 SizeBits:8] map[Name:vc_utf_char OffsetBits:12000 SizeBits:32] map[Name:vc_tab_stop OffsetBits:12032 SizeBits:256] map[Name:vc_palette OffsetBits:12288 SizeBits:384] map[Name:vc_translate OffsetBits:12672 SizeBits:64] map[Name:vc_bell_pitch OffsetBits:12736 SizeBits:32] map[Name:vc_bell_duration OffsetBits:12768 SizeBits:32] map[Name:vc_cur_blink_ms OffsetBits:12800 SizeBits:16] map[Name:vc_display_fg OffsetBits:12864 SizeBits:64] map[Name:uni_pagedict OffsetBits:12928 SizeBits:64] map[Name:uni_pagedict_loc OffsetBits:12992 SizeBits:64] map[Name:vc_uni_lines OffsetBits:13056 SizeBits:64] map[Name:vc_saved_screen OffsetBits:13120 SizeBits:64] map[Name:vc_saved_uni_lines OffsetBits:13184 SizeBits:64] map[Name:vc_saved_cols OffsetBits:13248 SizeBits:32] map[Name:vc_saved_rows OffsetBits:13280 SizeBits:32]]]
|
| 37/2 |
2026/06/01 19:27 |
llm |
expert |
0m
Model:
Tokens:
input: 27053
output: 36
thoughts: 45
Thoughts: Here's my take on the thought process, considering I'm an expert:
**Investigating TTY Port Structure within vc_data**
Okay, so I'm looking at `vc_data` and immediately see that the `tty_port port` structure sits right at the beginning, at offset 0. That's good, efficient memory usage. Now, I need to confirm something I'm pretty sure about, but it's always best to double-check: the `tty_port` structure contains a `tty` field. Given that `vc_data` likely deals with virtual consoles, this connection is crucial. I'll take a look at the definition of `struct tty_port` and just make absolutely certain. It's the lynchpin I'm betting on for the TTY connection within this `vc_data` context.
|
| 38/2 |
2026/06/01 19:28 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:drivers/tty/vt/keyboard.c Name:tty_port]
Results: map[Fields:[map[Name:buf OffsetBits:0 SizeBits:2240] map[Name:tty OffsetBits:2240 SizeBits:64] map[Name:itty OffsetBits:2304 SizeBits:64] map[Name:ops OffsetBits:2368 SizeBits:64] map[Name:client_ops OffsetBits:2432 SizeBits:64] map[Name:lock OffsetBits:2496 SizeBits:1024] map[Name:blocked_open OffsetBits:3520 SizeBits:32] map[Name:count OffsetBits:3552 SizeBits:32] map[Name:open_wait OffsetBits:3584 SizeBits:1152] map[Name:delta_msr_wait OffsetBits:4736 SizeBits:1152] map[Name:flags OffsetBits:5888 SizeBits:64] map[Name:iflags OffsetBits:5952 SizeBits:64] map[Name:console OffsetBits:6016 SizeBits:1] map[Name:mutex OffsetBits:6080 SizeBits:1024] map[Name:buf_mutex OffsetBits:7104 SizeBits:1024] map[Name:xmit_buf OffsetBits:8128 SizeBits:64] map[Name:xmit_fifo OffsetBits:8192 SizeBits:192] map[Name:close_delay OffsetBits:8384 SizeBits:32] map[Name:closing_wait OffsetBits:8416 SizeBits:32] map[Name:drain_delay OffsetBits:8448 SizeBits:32] map[Name:kref OffsetBits:8480 SizeBits:32] map[Name:client_data OffsetBits:8512 SizeBits:64]]]
|
| 39/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 27809
output: 35
thoughts: 212
Thoughts: **Analyzing the TTY Port and Virtual Console Interaction**
Okay, so I'm looking at this code and something seems off. The `tty_port` structure, it appears to contain both `tty` and `itty`. Interesting. Now, in `release_tty`, I see this snippet:
```c
1583: if (tty->port)
1584: tty->port->itty = NULL;
```
It explicitly sets `itty` to `NULL`. The issue is, I'm trying to wrap my head around this because `kbd_keycode` seems to use `vc->port.tty`. Specifically:
```c
1434: tty = vc->port.tty;
```
Hold on, let me double-check that `drivers/tty/vt/keyboard.c` code again. Is it *actually* `vc->port.tty` that's being used in relation to `kbd_keycode`, or did I misread something? The `codesearch-definition-source` result for `kbd_keycode` confirms my initial observation. It explicitly states:
```c
1434: tty = vc->port.tty;
```
Right, I need to take a step back and think about this for a second. Ah, I see it now.
But wait, hold on a second. I really should verify the `struct tty_port` definition itself. Better to confirm the structure layout before proceeding.
|
| 40/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:include/linux/tty_port.h FirstLine:1 LineCount:50]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef _LINUX_TTY_PORT_H
3: #define _LINUX_TTY_PORT_H
4:
5: #include <linux/kfifo.h>
6: #include <linux/kref.h>
7: #include <linux/mutex.h>
8: #include <linux/tty_buffer.h>
9: #include <linux/wait.h>
10:
11: struct attribute_group;
12: struct tty_driver;
13: struct tty_port;
14: struct tty_struct;
15:
16: /**
17: * struct tty_port_operations -- operations on tty_port
18: * @carrier_raised: return true if the carrier is raised on @port
19: * @dtr_rts: raise the DTR line if @active is true, otherwise lower DTR
20: * @shutdown: called when the last close completes or a hangup finishes IFF the
21: * port was initialized. Do not use to free resources. Turn off the device
22: * only. Called under the port mutex to serialize against @activate and
23: * @shutdown.
24: * @activate: called under the port mutex from tty_port_open(), serialized using
25: * the port mutex. Supposed to turn on the device.
26: *
27: * FIXME: long term getting the tty argument *out* of this would be good
28: * for consoles.
29: *
30: * @destruct: called on the final put of a port. Free resources, possibly incl.
31: * the port itself.
32: */
33: struct tty_port_operations {
34: bool (*carrier_raised)(struct tty_port *port);
35: void (*dtr_rts)(struct tty_port *port, bool active);
36: void (*shutdown)(struct tty_port *port);
37: int (*activate)(struct tty_port *port, struct tty_struct *tty);
38: void (*destruct)(struct tty_port *port);
39: };
40:
41: struct tty_port_client_operations {
42: size_t (*receive_buf)(struct tty_port *port, const u8 *cp, const u8 *fp,
43: size_t count);
44: void (*lookahead_buf)(struct tty_port *port, const u8 *cp,
45: const u8 *fp, size_t count);
46: void (*write_wakeup)(struct tty_port *port);
47: };
48:
49: extern const struct tty_port_client_operations tty_port_default_client_ops;
50:
]
|
| 41/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 29183
output: 36
thoughts: 14
Thoughts: Here's my take on the thought process, summarized as you requested:
**Deconstructing the `tty_port` Structure**
Okay, so I need to get a handle on `tty_port`. Time to dive into the definition. I'm going to start by pulling up the header file. I need to understand what this structure *actually* holds. What are the key elements? What's the fundamental design philosophy driving it? I'll be looking for the crucial fields that manage the core aspects of a tty port: resource allocation, state tracking (open/closed, active/inactive), data buffering, and interrupt handling configurations. From there, I can get a feel for how it interacts with the underlying hardware or virtual devices. Is there any particular design pattern or technique being used? I'm going to be paying close attention to any uses of spinlocks, mutexes, and any related synchronization mechanisms. Understanding these details is essential to grasping the overall architecture. I also need to compare it with any related structures to look for areas of shared functionality and responsibilities. Then I will see what is being pointed to by other structures; is it being used? How is it being accessed? I can make a decision as to its importance.
|
| 42/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:include/linux/tty_port.h FirstLine:51 LineCount:50]
Results: map[Contents: 51: /**
52: * struct tty_port -- port level information
53: *
54: * @buf: buffer for this port, locked internally
55: * @tty: back pointer to &struct tty_struct, valid only if the tty is open. Use
56: * tty_port_tty_get() to obtain it (and tty_kref_put() to release).
57: * @itty: internal back pointer to &struct tty_struct. Avoid this. It should be
58: * eliminated in the long term.
59: * @ops: tty port operations (like activate, shutdown), see &struct
60: * tty_port_operations
61: * @client_ops: tty port client operations (like receive_buf, write_wakeup).
62: * By default, tty_port_default_client_ops is used.
63: * @lock: lock protecting @tty
64: * @blocked_open: # of procs waiting for open in tty_port_block_til_ready()
65: * @count: usage count
66: * @open_wait: open waiters queue (waiting e.g. for a carrier)
67: * @delta_msr_wait: modem status change queue (waiting for MSR changes)
68: * @flags: user TTY flags (%ASYNC_)
69: * @iflags: internal flags (%TTY_PORT_)
70: * @console: when set, the port is a console
71: * @mutex: locking, for open, shutdown and other port operations
72: * @buf_mutex: @xmit_buf alloc lock
73: * @xmit_buf: optional xmit buffer used by some drivers
74: * @xmit_fifo: optional xmit buffer used by some drivers
75: * @close_delay: delay in jiffies to wait when closing the port
76: * @closing_wait: delay in jiffies for output to be sent before closing
77: * @drain_delay: set to zero if no pure time based drain is needed else set to
78: * size of fifo
79: * @kref: references counter. Reaching zero calls @ops->destruct() if non-%NULL
80: * or frees the port otherwise.
81: * @client_data: pointer to private data, for @client_ops
82: *
83: * Each device keeps its own port level information. &struct tty_port was
84: * introduced as a common structure for such information. As every TTY device
85: * shall have a backing tty_port structure, every driver can use these members.
86: *
87: * The tty port has a different lifetime to the tty so must be kept apart.
88: * In addition be careful as tty -> port mappings are valid for the life
89: * of the tty object but in many cases port -> tty mappings are valid only
90: * until a hangup so don't use the wrong path.
91: *
92: * Tty port shall be initialized by tty_port_init() and shut down either by
93: * tty_port_destroy() (refcounting not used), or tty_port_put() (refcounting).
94: *
95: * There is a lot of helpers around &struct tty_port too. To name the most
96: * significant ones: tty_port_open(), tty_port_close() (or
97: * tty_port_close_start() and tty_port_close_end() separately if need be), and
98: * tty_port_hangup(). These call @ops->activate() and @ops->shutdown() as
99: * needed.
100: */
]
|
| 43/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 30510
output: 37
thoughts: 77
Thoughts: Here's my summary, as though I'm processing this code:
**Analyzing the `tty_port` Structure**
Okay, so I'm looking at this snippet defining `struct tty_port`. Seems like we're diving into the core data structures used for tty management, which is right where I want to be. I see a `tty_bufhead buf` member, that's immediately interesting, it points to a buffer head, this probably relates to the input/output buffering for the tty port. Efficient buffer management is crucial, especially in high-volume serial communication.
Then, there are two `tty_struct` pointers, `tty` and `itty`. Hmm, the names are a little ambiguous without seeing the bigger picture. I'm guessing that these pointers point to some underlying tty structures, probably the actual tty device itself, and perhaps another tty struct, maybe an "internal tty" for port management or a related tty. Need the definition of the tty_struct to understand the relationships. Knowing what's in that structure is key to understanding how the tty port interacts with the driver and the device. Let's find that `tty_struct` definition.
|
| 44/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:include/linux/tty_port.h FirstLine:101 LineCount:30]
Results: map[Contents: 101: struct tty_port {
102: struct tty_bufhead buf;
103: struct tty_struct *tty;
104: struct tty_struct *itty;
105: const struct tty_port_operations *ops;
106: const struct tty_port_client_operations *client_ops;
107: spinlock_t lock;
108: int blocked_open;
109: int count;
110: wait_queue_head_t open_wait;
111: wait_queue_head_t delta_msr_wait;
112: unsigned long flags;
113: unsigned long iflags;
114: unsigned char console:1;
115: struct mutex mutex;
116: struct mutex buf_mutex;
117: u8 *xmit_buf;
118: DECLARE_KFIFO_PTR(xmit_fifo, u8);
119: unsigned int close_delay;
120: unsigned int closing_wait;
121: int drain_delay;
122: struct kref kref;
123: void *client_data;
124: };
125:
126: /* tty_port::iflags bits -- use atomic bit ops */
127: #define TTY_PORT_INITIALIZED 0 /* device is initialized */
128: #define TTY_PORT_SUSPENDED 1 /* device is suspended */
129: #define TTY_PORT_ACTIVE 2 /* device is open */
130:
]
|
| 45/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 31360
output: 38
thoughts: 83
Thoughts: Here's my thought process, as requested:
**Navigating the TTY Landscape**
Alright, I'm digging into this `tty_port` structure and it looks like it has both `tty` and `itty` members. Now, I'm focusing in on `kbd_keycode`. I saw something interesting there:
```c
1434: tty = vc->port.tty;
```
That line from `kbd_keycode` specifically caught my eye. Just to be absolutely certain I haven't missed anything, I need to revisit `kbd_keycode` within `drivers/tty/vt/keyboard.c`. Time for a quick `read-file` operation to double-check my understanding and solidify my mental model. Gotta be meticulous about this stuff.
|
| 46/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:1423 LineCount:20]
Results: map[Contents:1423: static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
1424: {
1425: struct vc_data *vc = vc_cons[fg_console].d;
1426: unsigned short keysym, *key_map;
1427: unsigned char type;
1428: bool raw_mode;
1429: struct tty_struct *tty;
1430: int shift_final;
1431: struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down };
1432: int rc;
1433:
1434: tty = vc->port.tty;
1435:
1436: if (tty && (!tty->driver_data)) {
1437: /* No driver data? Strange. Okay we fix it then. */
1438: tty->driver_data = vc;
1439: }
1440:
1441: kbd = &kbd_table[vc->vc_num];
1442:
]
|
| 47/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 31954
output: 37
thoughts: 109
Thoughts: **Analyzing the tty Structure in Virtual Consoles**
Okay, so I'm focusing on how the `tty` structure is used within the virtual console code. I've confirmed that the assignment `tty = vc->port.tty;` is correct. My concern now revolves around how this `tty` structure is utilized. Looking at the code again, `fn_hold` also employs `vc->port.tty`, which is interesting.
Let me refresh my memory and double-check the `fn_hold` function; I need to be absolutely sure about this:
```c
510: static void fn_hold(struct vc_data *vc)
511: {
512: struct tty_struct *tty = vc->port.tty;
```
Yes, that's it. It's using the same `tty` pointer obtained from `vc->port.tty`. Now I can continue my analysis.
|
| 48/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:510 LineCount:10]
Results: map[Contents: 510: static void fn_hold(struct vc_data *vc)
511: {
512: struct tty_struct *tty = vc->port.tty;
513:
514: if (rep || !tty)
515: return;
516:
517: /*
518: * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty);
519: * these routines are also activated by ^S/^Q.
]
|
| 49/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 32463
output: 38
thoughts: 81
Thoughts: Okay, let me break this down.
**Investigating a TTY Release in Kernel Code**
Right, so I'm looking at this code and it's using `vc->port.tty`. That much is clear. But then I see this `release_tty` function and it's setting `tty->port->itty = NULL`. Now, hold on a second... Why "itty" and not "tty"? That's a bit odd. I need to understand that. Let me quickly double-check that `release_tty` function again to make sure I'm following the logic. Specifically, I need to see what's happening around this line:
```c
1583: if (tty->port)
1584: tty->port->itty = NULL;
```
That `itty` variable warrants a deeper look to understand the relationship and implications here. Something about that naming convention is throwing a red flag, and I want to make sure I understand the memory management and pointer manipulation correctly. This isn't immediately obvious, and I'll need to dig further into the context of this function.
|
| 50/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:drivers/tty/tty_io.c FirstLine:1574 LineCount:20]
Results: map[Contents:1574: static void release_tty(struct tty_struct *tty, int idx)
1575: {
1576: /* This should always be true but check for the moment */
1577: WARN_ON(tty->index != idx);
1578: WARN_ON(!mutex_is_locked(&tty_mutex));
1579: if (tty->ops->shutdown)
1580: tty->ops->shutdown(tty);
1581: tty_save_termios(tty);
1582: tty_driver_remove_tty(tty->driver, tty);
1583: if (tty->port)
1584: tty->port->itty = NULL;
1585: if (tty->link)
1586: tty->link->port->itty = NULL;
1587: if (tty->port)
1588: tty_buffer_cancel_work(tty->port);
1589: if (tty->link)
1590: tty_buffer_cancel_work(tty->link->port);
1591:
1592: tty_kref_put(tty->link);
1593: tty_kref_put(tty);
]
|
| 51/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 33158
output: 33
thoughts: 90
Thoughts: Here's my thought process, as if I were analyzing this code:
**Analyzing Potential Null Pointer Dereference in TTY Structure**
Okay, so I'm seeing a code snippet where `itty` is being explicitly set to `NULL`. The concern that immediately pops into my head is, if only `itty` is cleared, and *not* `tty`, then `tty` in the `tty_port` structure might still be holding a non-NULL value. That could lead to a really nasty null pointer dereference later on. I need to figure out the context.
My next step is to trace where `tty_port->tty` is actually *assigned* a value. My experience tells me that, more often than not, this sort of initialization happens within a function like `tty_port_open`, or something analogous to that initialization routine.
Since this is the tty subsystem, let me think... For virtual terminals (VT) specifically, I seem to remember that `con_install` is the function that handles tty initialization. That rings a bell.
Alright, so given that, I need to investigate `drivers/tty/vt/vt.c` to confirm my suspicion. That's the code I need to dig into now to see how the `tty` pointer is initialized and potentially uninitialized in that context. This is the likely area where I'll find the root cause. I need to meticulously follow the assignment and deallocation path of `tty` within that VT driver.
|
| 52/2 |
2026/06/01 19:28 |
tool |
grepper |
0m
Args: map[Expression:port.tty = PathPrefix:drivers/tty/vt/vt.c]
Results: map[Output:drivers/tty/vt/vt.c=3736=static int con_install(struct tty_driver *driver, struct tty_struct *tty)
--
drivers/tty/vt/vt.c-3757- tty->driver_data = vc;
drivers/tty/vt/vt.c:3758: vc->port.tty = tty;
drivers/tty/vt/vt.c-3759- tty_port_get(&vc->port);
--
drivers/tty/vt/vt.c=3785=static void con_shutdown(struct tty_struct *tty)
--
drivers/tty/vt/vt.c-3790- guard(console_lock)();
drivers/tty/vt/vt.c:3791: vc->port.tty = NULL;
drivers/tty/vt/vt.c-3792-}
]
|
| 53/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 33824
output: 32
thoughts: 72
Thoughts: **Analyzing the TTY Shutdown Process**
Right, okay, let's see. I'm following the shutdown sequence, and it looks like `con_shutdown` is the key function that zeroes out the `vc->port.tty` pointer. That makes sense, a clean break from the virtual console's link to the terminal. Now, the next logical step is `release_tty`, which should trigger the terminal's shutdown procedure by calling `tty->ops->shutdown(tty)`. Given this is a VT, I'm fairly certain the `tty->ops` pointer will be pointing to the `con_ops` structure. Time to cross-reference that expectation, and Iβll check in `drivers/tty/vt/vt.c` to confirm my understanding of how console shutdown is handled at the driver level.
|
| 54/2 |
2026/06/01 19:28 |
tool |
grepper |
0m
Args: map[Expression:con_ops PathPrefix:drivers/tty/vt/vt.c]
Results: map[Output:drivers/tty/vt/vt.c=3909=console_initcall(con_init);
drivers/tty/vt/vt.c-3910-
drivers/tty/vt/vt.c:3911:static const struct tty_operations con_ops = {
drivers/tty/vt/vt.c-3912- .install = con_install,
--
drivers/tty/vt/vt.c=3949=int __init vty_init(const struct file_operations *console_fops)
--
drivers/tty/vt/vt.c-3975- console_driver->init_termios.c_iflag |= IUTF8;
drivers/tty/vt/vt.c:3976: tty_set_operations(console_driver, &con_ops);
drivers/tty/vt/vt.c-3977- if (tty_register_driver(console_driver))
]
|
| 55/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 34342
output: 38
thoughts: 11
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the `con_ops` Definition**
Alright, let's dive in. I need to get a clear understanding of this `con_ops` definition. My immediate thought is, "What exactly are we dealing with here?" I need to refresh my mental model. Is it a function, a class, a variable holding specific configuration, or perhaps a set of operations within a broader system? The level of abstraction needs to be clarified immediately. The specific context is also important here. Is this within an optimization framework, a distributed computing environment, a control systems library, or somewhere else? That will heavily influence my interpretation and the assumptions I can make. Depending on that, I'll need to analyze its inputs, outputs, side effects, and, crucially, how it interacts with other components of the system. I need to figure out the "intent" behind it. What problem is this trying to solve? Or at least, what piece of a larger problem does it contribute to solving? Knowing that will make the implementation much clearer and more meaningful. It's time to dig in.
|
| 56/2 |
2026/06/01 19:28 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/vt.c FirstLine:3911 LineCount:30]
Results: map[Contents:3911: static const struct tty_operations con_ops = {
3912: .install = con_install,
3913: .open = con_open,
3914: .close = con_close,
3915: .write = con_write,
3916: .write_room = con_write_room,
3917: .put_char = con_put_char,
3918: .flush_chars = con_flush_chars,
3919: .ioctl = vt_ioctl,
3920: #ifdef CONFIG_COMPAT
3921: .compat_ioctl = vt_compat_ioctl,
3922: #endif
3923: .stop = con_stop,
3924: .start = con_start,
3925: .throttle = con_throttle,
3926: .unthrottle = con_unthrottle,
3927: .resize = vt_resize,
3928: .shutdown = con_shutdown,
3929: .cleanup = con_cleanup,
3930: .ldisc_ok = con_ldisc_ok,
3931: };
3932:
3933: static struct cdev vc0_cdev;
3934:
3935: static ssize_t show_tty_active(struct device *dev,
3936: struct device_attribute *attr, char *buf)
3937: {
3938: return sprintf(buf, "tty%d\n", fg_console + 1);
3939: }
3940: static DEVICE_ATTR(active, S_IRUGO, show_tty_active, NULL);
]
|
| 57/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 35099
output: 34
thoughts: 1348
Thoughts: **UAF Investigation in the Virtual Console TTY Release**
Okay, let's break this down systematically. I'm looking at a potential use-after-free (UAF) issue related to virtual console TTYs. The initial clue is that `con_shutdown` is called from `release_tty`, and `con_shutdown` sets `vc->port.tty` to `NULL`. But, the key is the timing. `release_tty` runs *after* `tty_release` has done some initial work. The free stack points to `kfree` happening within `release_one_tty`. I see that `release_one_tty` is called from a workqueue.
So, the sequence is this: First, `tty_release` triggers `tty_release_struct`. That then calls `release_tty`. Inside `release_tty` we have `con_shutdown`, which is the one that sets the `tty` pointer to NULL. After this we have `tty_kref_put`. The `tty_kref_put` then queues `release_one_tty`. Finally, the `release_one_tty` actually calls `free_tty_struct` which will lead to a call to `kfree(tty)`.
Now, if `kbd_event` attempts to access the TTY *between* when `con_shutdown` NULLs it out and when `release_one_tty` frees it, we have a problem. The access happens within `kbd_event` which obtains `kbd_event_lock`. The sequence in `kbd_event` goes: It calls `kbd_keycode`, which reads `tty = vc->port.tty`. It checks to make sure the tty isn't NULL and then calls `fn_hold`. Inside `fn_hold`, the `tty` is used for `stop_tty(tty)`. This is the potential UAF spot.
The critical factor is locking. `release_tty` *is* called under `tty_mutex`, which is a good starting point. `con_shutdown` is called from `release_tty` and takes `console_lock`. However, and this is where it gets interesting, `kbd_event` takes `kbd_event_lock`, and *neither* `console_lock` *nor* `tty_mutex`. This suggests a window for a race condition.
Let's drill down: `kbd_keycode` reads `tty = vc->port.tty`. It checks if `tty` isn't `NULL` but nothing, *nothing*, prevents `tty` from being freed immediately after that read. That's a critical weakness! Looking closer at the code, I see:
```c
1434: tty = vc->port.tty;
1435:
1436: if (tty && (!tty->driver_data)) {
...
1439: }
```
Then later, the code calls a handler function which in turn calls `fn_hold(vc)`:
```c
512: struct tty_struct *tty = vc->port.tty;
513:
514: if (rep || !tty)
515: return;
...
525: stop_tty(tty);
```
Again, `fn_hold` *also* grabs `tty` from `vc->port.tty`. If `con_shutdown` has already run, `vc->port.tty` is `NULL`, and the code exits gracefully. That's *good*. But, `con_shutdown` runs *before* the actual `tty` is freed in the workqueue by `release_one_tty`.
The sequence then becomes: 1) `release_tty` runs, calling `con_shutdown`, `vc->port.tty` becomes `NULL`. 2) `release_tty` queues `release_one_tty`. 3) `release_one_tty` runs, and `kfree(tty)` happens. So, the window for a UAF exists *between* steps 1 and 3. If `kbd_event` tries to run between steps 1 and 3, and before `release_one_tty` runs, it will be fine. If it runs *before* step 1, it will get a valid tty, but since `release_tty` has not yet ran, `tty_kref_put` hasn't been called. So, the `tty` should not yet be freed.
The key is when `release_tty` is called. It's called when the *last* user-space file descriptor is closed. However
|
| 58/2 |
2026/06/01 19:28 |
tool |
grepper |
0m
Args: map[Expression:kbd_event_lock PathPrefix:drivers/tty/vt/keyboard.c]
Results: map[Output:drivers/tty/vt/keyboard.c=138=static struct input_handler kbd_handler;
drivers/tty/vt/keyboard.c:139:static DEFINE_SPINLOCK(kbd_event_lock);
drivers/tty/vt/keyboard.c-140-static DEFINE_SPINLOCK(led_lock);
--
drivers/tty/vt/keyboard.c=392=static void set_leds(void)
--
drivers/tty/vt/keyboard.c-400- * undefined, so that shiftkey release is seen. The caller must hold the
drivers/tty/vt/keyboard.c:401: * kbd_event_lock.
drivers/tty/vt/keyboard.c-402- */
--
drivers/tty/vt/keyboard.c=426=void vt_set_leds_compute_shiftstate(void)
--
drivers/tty/vt/keyboard.c-435-
drivers/tty/vt/keyboard.c:436: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-437- do_compute_shiftstate();
--
drivers/tty/vt/keyboard.c=1232=void vt_set_led_state(unsigned int console, int leds)
--
drivers/tty/vt/keyboard.c-1246- * the LED updating. We can't do it yet because fn_hold calls stop_tty
drivers/tty/vt/keyboard.c:1247: * and start_tty under the kbd_event_lock, while normal tty paths
drivers/tty/vt/keyboard.c-1248- * don't hold the lock. We probably need to split out an LED lock
--
drivers/tty/vt/keyboard.c=1574=static void kbd_event(struct input_handle *handle, unsigned int event_type,
--
drivers/tty/vt/keyboard.c-1577- /* We are called with interrupts disabled, just take the lock */
drivers/tty/vt/keyboard.c:1578: scoped_guard(spinlock, &kbd_event_lock) {
drivers/tty/vt/keyboard.c-1579- if (event_type == EV_MSC && event_code == MSC_RAW &&
--
drivers/tty/vt/keyboard.c=1720=static int vt_do_kdgkbdiacr(void __user *udp)
--
drivers/tty/vt/keyboard.c-1731- copy it after we unlock */
drivers/tty/vt/keyboard.c:1732: scoped_guard(spinlock_irqsave, &kbd_event_lock) {
drivers/tty/vt/keyboard.c-1733- asize = accent_table_size;
--
drivers/tty/vt/keyboard.c=1748=static int vt_do_kdgkbdiacruc(void __user *udp)
--
drivers/tty/vt/keyboard.c-1759- copy it after we unlock */
drivers/tty/vt/keyboard.c:1760: scoped_guard(spinlock_irqsave, &kbd_event_lock) {
drivers/tty/vt/keyboard.c-1761- asize = accent_table_size;
--
drivers/tty/vt/keyboard.c=1773=static int vt_do_kdskbdiacr(void __user *udp, int perm)
--
drivers/tty/vt/keyboard.c-1793-
drivers/tty/vt/keyboard.c:1794: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1795- accent_table_size = ct;
--
drivers/tty/vt/keyboard.c=1808=static int vt_do_kdskbdiacruc(void __user *udp, int perm)
--
drivers/tty/vt/keyboard.c-1828- }
drivers/tty/vt/keyboard.c:1829: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1830- if (ct)
--
drivers/tty/vt/keyboard.c=1869=int vt_do_kdskbmode(unsigned int console, unsigned int arg)
--
drivers/tty/vt/keyboard.c-1872-
drivers/tty/vt/keyboard.c:1873: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1874- switch(arg) {
--
drivers/tty/vt/keyboard.c=1905=int vt_do_kdskbmeta(unsigned int console, unsigned int arg)
--
drivers/tty/vt/keyboard.c-1908-
drivers/tty/vt/keyboard.c:1909: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1910- switch(arg) {
--
drivers/tty/vt/keyboard.c=1945=static unsigned short vt_kdgkbent(unsigned char kbdmode, unsigned char idx,
--
drivers/tty/vt/keyboard.c-1950- /* Ensure another thread doesn't free it under us */
drivers/tty/vt/keyboard.c:1951: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1952- key_map = key_maps[map];
--
drivers/tty/vt/keyboard.c=1963=static int vt_kdskbent(unsigned char kbdmode, unsigned char idx,
--
drivers/tty/vt/keyboard.c-1968- if (!idx && val == K_NOSUCHMAP) {
drivers/tty/vt/keyboard.c:1969: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-1970- /* deallocate map */
--
drivers/tty/vt/keyboard.c-1999-
drivers/tty/vt/keyboard.c:2000: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-2001- key_map = key_maps[map];
--
drivers/tty/vt/keyboard.c=2115=int vt_do_kdskled(unsigned int console, int cmd, unsigned long arg, int perm)
--
drivers/tty/vt/keyboard.c-2123- case KDGKBLED:
drivers/tty/vt/keyboard.c:2124: scoped_guard(spinlock_irqsave, &kbd_event_lock)
drivers/tty/vt/keyboard.c-2125- ucval = kb->ledflagstate | (kb->default_ledflagstate << 4);
--
drivers/tty/vt/keyboard.c=2192=void vt_reset_unicode(unsigned int console)
drivers/tty/vt/keyboard.c-2193-{
drivers/tty/vt/keyboard.c:2194: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-2195- kbd_table[console].kbdmode = default_utf8 ? VC_UNICODE : VC_XLATE;
--
drivers/tty/vt/keyboard.c=2217=void vt_reset_keyboard(unsigned int console)
--
drivers/tty/vt/keyboard.c-2220-
drivers/tty/vt/keyboard.c:2221: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-2222- set_vc_kbd_mode(kb, VC_REPEAT);
--
drivers/tty/vt/keyboard.c=2259=void vt_set_kbd_mode_bit(unsigned int console, int bit)
--
drivers/tty/vt/keyboard.c-2262-
drivers/tty/vt/keyboard.c:2263: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-2264- set_vc_kbd_mode(kb, bit);
--
drivers/tty/vt/keyboard.c=2276=void vt_clr_kbd_mode_bit(unsigned int console, int bit)
--
drivers/tty/vt/keyboard.c-2279-
drivers/tty/vt/keyboard.c:2280: guard(spinlock_irqsave)(&kbd_event_lock);
drivers/tty/vt/keyboard.c-2281- clr_vc_kbd_mode(kb, bit);
]
|
| 59/2 |
2026/06/01 19:28 |
llm |
expert |
0m
Model:
Tokens:
input: 39681
output: 40
thoughts: 1333
Thoughts: **Analyzing a Potential Use-After-Free Vulnerability**
Okay, let's break this down. It seems we have a classic use-after-free scenario brewing. I'm focusing on the interaction between keyboard event handling and the lifecycle of a `tty_struct` object.
Here's the sequence as I understand it. The core issue is that `kbd_event` can access a `tty_struct` via `vc->port.tty` without proper synchronization to prevent it from being freed concurrently.
The `kbd_event` path, specifically within `kbd_keycode` and `fn_hold`, accesses `vc->port.tty`. The concern arises because `con_shutdown` sets `vc->port.tty` to `NULL`. The call chain is like this: `release_tty` -> `tty_release_struct` -> `tty_release`. This chain clears the `tty` field. Furthermore, the `tty_struct` itself is ultimately freed in `release_one_tty`, which is part of a workqueue.
The initial hunch is that `kbd_event` is triggered by something like `evdev_write` (from user space) while `tty_release` is running. This means `tty_release` might free the `tty_struct` before the `kbd_event` handler has finished using it.
My first thought was that `kbd_event` runs with interrupts disabled, utilizing `kbd_event_lock` (a spinlock), while `con_shutdown` uses `console_lock` and `release_tty` takes `tty_mutex`. If `con_shutdown` *didn't* take `kbd_event_lock`, there's potential for concurrent access. And it doesn't.
Now, let's look at the critical code path in `kbd_keycode` and `fn_hold`. Line 1434 in `kbd_keycode` gets the `tty` pointer ( `tty = vc->port.tty;`) and uses it further down. Line 512 in `fn_hold` does the same. If `con_shutdown` runs *between* these lines, the `fn_hold` will be handed a `NULL` pointer. But the problem is if `con_shutdown` runs *after* either of those lines, a valid pointer to the `tty_struct` has been captured. If `release_one_tty` then executes and frees the `tty_struct` *before* the subsequent call to `stop_tty(tty)`, we have UAF.
However, `release_one_tty` runs in a workqueue, and the function that calls it, `release_tty` (which calls `con_shutdown`), queues the work. So `release_one_tty` *should* run after `con_shutdown` completes. But, crucially, `fn_hold` runs in process context (e.g., in `evdev_write`) whereas `release_one_tty` is in a workqueue, so they can run concurrently on different CPUs.
The real key, I think, is the lack of synchronization. `fn_hold` is running under the protection of `kbd_event_lock`, and if `release_one_tty` *doesn't* take that lock, then it can free the `tty` while `fn_hold` is using the pointer.
And here's the kicker: I've checked. `release_one_tty` *doesn't* take `kbd_event_lock`, nor does `free_tty_struct`. Bingo. This is a clear race condition.
Let's quickly check the `stop_tty` code. The UAF is going to happen inside `stop_tty` when it accesses `tty->flow.lock` after `tty` has been freed.
One more piece: `tty_release` is called when the last file descriptor is closed, but the `tty_struct` itself is refcounted. `release_tty` calls `tty_kref_put(tty)`. This should be the *last* kref put. However, I've confirmed that the tty port does *not* hold a kref on the tty itself. `tty_port_tty_get()` *does* acquire a kref for safe access to the `tty_struct`, but `kbd_keycode` and `fn_hold` don't use it. They just do a direct dereference of `vc->port.tty`, meaning that the pointer can become invalid after `release_one_tty` frees the tty.
In short: A UAF is very possible. The `kbd_event` code path doesn't synchronize correctly with the `tty` release path. `kbd_event` grabs a pointer to the tty
|
| 60/2 |
2026/06/01 19:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/tty_port.h Name:tty_port_tty_get]
Results: map[SourceCode: 313: /**
314: * tty_port_tty_get - get a tty reference
315: * @port: tty port
316: *
317: * Return a refcount protected tty instance or %NULL if the port is not
318: * associated with a tty (eg due to close or hangup).
319: */
320: struct tty_struct *tty_port_tty_get(struct tty_port *port)
321: {
322: guard(spinlock_irqsave)(&port->lock);
323: return tty_kref_get(port->tty);
324: }
SourceFile:drivers/tty/tty_port.c]
|
| 61/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 42303
output: 32
thoughts: 129
Thoughts: **Analyzing Potential Use-After-Free Vulnerabilities in tty Management**
Okay, so `tty_port_tty_get` does indeed grab that crucial port lock and delivers a kref-protected `tty` structure. That's good. My initial thought is, if `kbd_keycode` and `fn_hold` leveraged this function, we could dodge the bullet of a Use-After-Free vulnerability. The kref is key, of course.
Hold on a second, though. Before I jump to conclusions, I need to verify that those two functions are *intended* to use `tty_port_tty_get` in the first place. Let me double-check the documentation. Aha, the comment in `tty_port.h` explicitly states, "Use tty_port_tty_get() to obtain it." Perfect. That confirms my suspicion.
Now, just to be thorough and rule out any other blind spots, I'll scan through `keyboard.c` again. I want to identify if there are any other instances where `vc->port.tty` is accessed directly. This will help confirm this is limited to the two aforementioned functions.
|
| 62/2 |
2026/06/01 19:29 |
tool |
grepper |
0m
Args: map[Expression:port.tty PathPrefix:drivers/tty/vt/keyboard.c]
Results: map[Output:drivers/tty/vt/keyboard.c=510=static void fn_hold(struct vc_data *vc)
drivers/tty/vt/keyboard.c-511-{
drivers/tty/vt/keyboard.c:512: struct tty_struct *tty = vc->port.tty;
drivers/tty/vt/keyboard.c-513-
--
drivers/tty/vt/keyboard.c=1423=static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
--
drivers/tty/vt/keyboard.c-1433-
drivers/tty/vt/keyboard.c:1434: tty = vc->port.tty;
drivers/tty/vt/keyboard.c-1435-
]
|
| 63/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 42907
output: 38
thoughts: 146
Thoughts: **Analyzing the TTY Shutdown Procedure**
Okay, so I'm focusing on a specific area, these two locations primarily. Let me quickly verify a crucial detail: does the `con_shutdown` function, specifically, in relation to `vc->port.tty`, handle locking correctly? I need to ensure it's thread-safe. I'm thinking, does it acquire `port->lock` before setting `vc->port.tty = NULL`?
Let me just quickly check the source code in `drivers/tty/vt/vt.c`. Ah, here's `con_shutdown`:
```c
3785: static void con_shutdown(struct tty_struct *tty)
3786: {
...
3790: guard(console_lock)();
3791: vc->port.tty = NULL;
3792: }
```
Okay, it looks like it uses `console_lock`, not `port->lock`. Interesting. This requires more investigation. Let's dig deeper into the source of `con_shutdown` to understand the implications of this locking mechanism.
|
| 64/2 |
2026/06/01 19:29 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/vt.c FirstLine:3785 LineCount:10]
Results: map[Contents:3785: static void con_shutdown(struct tty_struct *tty)
3786: {
3787: struct vc_data *vc = tty->driver_data;
3788: BUG_ON(vc == NULL);
3789:
3790: guard(console_lock)();
3791: vc->port.tty = NULL;
3792: }
3793:
3794: static void con_cleanup(struct tty_struct *tty)
]
|
| 65/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 43490
output: 40
thoughts: 139
Thoughts: **Analyzing Potential Race Conditions in TTY Port Management**
Okay, so I'm looking at this code and trying to suss out potential race conditions. It seems the `vc->port.lock` isn't a factor here, which simplifies things a bit. I know `tty_port_tty_get` does take `port->lock`, which is important. The question is, does `con_shutdown` also take `port->lock`? If it *didn't*, we'd have a classic race condition with `tty_port_tty_get` because they'd be operating on the same `port` data without coordination. However, I now recall that `con_shutdown` is called from `release_tty`. That detail is crucial because `release_tty` *is* called under `tty_mutex`, which provides the necessary serialization. But, wait, `tty_port_tty_get` still *doesn't* take that `tty_mutex`. That is... somewhat concerning.
I think, looking deeper, the correct function for *setting* `port->tty` should actually be `tty_port_tty_set`. Let me just double check if that is even being used.
|
| 66/2 |
2026/06/01 19:29 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:include/linux/tty_port.h Name:tty_port_tty_set]
Results: map[SourceCode: 327: /**
328: * tty_port_tty_set - set the tty of a port
329: * @port: tty port
330: * @tty: the tty
331: *
332: * Associate the port and tty pair. Manages any internal refcounts. Pass %NULL
333: * to deassociate a port.
334: */
335: void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
336: {
337: guard(spinlock_irqsave)(&port->lock);
338: tty_kref_put(port->tty);
339: port->tty = tty_kref_get(tty);
340: }
SourceFile:drivers/tty/tty_port.c]
|
| 67/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 44182
output: 36
thoughts: 551
Thoughts: **Analyzing a Potential Use-After-Free Vulnerability**
Okay, so I'm digging into this code, and it looks like `con_shutdown` really *should* be using `tty_port_tty_set(port, NULL)`, and `con_install` should be using `tty_port_tty_set(port, tty)`. That seems straightforward enough.
But I'm seeing that `kbd_keycode` and `fn_hold` are directly accessing `vc->port.tty` without grabbing a kref, and that's a red flag. I wonder if there's a good reason for this. Maybe it's because they're called from an interrupt-like context, specifically an input event? `kbd_event` is called from `input_pass_values`, which itself can be triggered by an interrupt, like a keyboard interrupt.
Wait, hold on... the stack trace actually shows `evdev_write` leading to `input_inject_event`. That's in process context. But, `kbd_event` can *also* be reached via `atkbd_interrupt` -> `input_event` -> ... -> `kbd_event`. So, in that case, it *is* in hardirq context!
Hmm, are `tty_kref_get` / `tty_kref_put` safe in that hardirq context? I have to consider that `tty_kref_put` calls `kref_put`, which might trigger `queue_release_one_tty`. And, *that* calls `schedule_work`. But, `schedule_work` is safe in irq context, right? Right, I think it is.
So, it looks like `kbd_keycode` *should* be using `tty_port_tty_get` to be safe. But let's step back, and re-examine the report. The UAF is specifically in `stop_tty`, which is interesting.
```c
763: void stop_tty(struct tty_struct *tty)
764: {
765: guard(spinlock_irqsave)(&tty->flow.lock);
766: __stop_tty(tty);
767: }
```
If `tty` has already been freed, then that access to `&tty->flow.lock` is an access to freed memory.
The report looks consistent: allocation happens in `alloc_tty_struct`, free happens in `release_one_tty` (a workqueue), and the "Last potentially related work creation" points to `tty_release`, queuing the free work. The object is `tty_struct`, and the access is at offset 1152. Okay, let me quickly double check the offset of `flow` within the `tty_struct` structure...
|
| 68/2 |
2026/06/01 19:29 |
tool |
codesearch-struct-layout |
0m
Args: map[ContextFile:drivers/tty/tty_io.c Name:tty_struct]
Results: map[Fields:[map[Name:kref OffsetBits:0 SizeBits:32] map[Name:index OffsetBits:32 SizeBits:32] map[Name:dev OffsetBits:64 SizeBits:64] map[Name:driver OffsetBits:128 SizeBits:64] map[Name:port OffsetBits:192 SizeBits:64] map[Name:ops OffsetBits:256 SizeBits:64] map[Name:ldisc OffsetBits:320 SizeBits:64] map[Name:ldisc_sem OffsetBits:384 SizeBits:1216] map[Name:atomic_write_lock OffsetBits:1600 SizeBits:1024] map[Name:legacy_mutex OffsetBits:2624 SizeBits:1024] map[Name:throttle_mutex OffsetBits:3648 SizeBits:1024] map[Name:termios_rwsem OffsetBits:4672 SizeBits:1088] map[Name:winsize_mutex OffsetBits:5760 SizeBits:1024] map[Name:termios OffsetBits:6784 SizeBits:352] map[Name:termios_locked OffsetBits:7136 SizeBits:352] map[Name:name OffsetBits:7488 SizeBits:512] map[Name:flags OffsetBits:8000 SizeBits:64] map[Name:count OffsetBits:8064 SizeBits:32] map[Name:receive_room OffsetBits:8096 SizeBits:32] map[Name:winsize OffsetBits:8128 SizeBits:64] map[Name:flow OffsetBits:8192 SizeBits:1088] map[Name:ctrl OffsetBits:9280 SizeBits:1216] map[Name:hw_stopped OffsetBits:10496 SizeBits:8] map[Name:closing OffsetBits:10504 SizeBits:8] map[Name:flow_change OffsetBits:10528 SizeBits:32] map[Name:link OffsetBits:10560 SizeBits:64] map[Name:fasync OffsetBits:10624 SizeBits:64] map[Name:write_wait OffsetBits:10688 SizeBits:1152] map[Name:read_wait OffsetBits:11840 SizeBits:1152] map[Name:hangup_work OffsetBits:12992 SizeBits:576] map[Name:disc_data OffsetBits:13568 SizeBits:64] map[Name:driver_data OffsetBits:13632 SizeBits:64] map[Name:files_lock OffsetBits:13696 SizeBits:1024] map[Name:write_cnt OffsetBits:14720 SizeBits:32] map[Name:write_buf OffsetBits:14784 SizeBits:64] map[Name:tty_files OffsetBits:14848 SizeBits:128] map[Name:SAK_work OffsetBits:14976 SizeBits:576]]]
|
| 69/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 46223
output: 38
thoughts: 73
Thoughts: **Analyzing the Data Flow**
Okay, so I'm looking at this data stream. I see that the initial buffer, which I'm calling `flow`, begins at 8192 bits. Converting that, that's 1024 bytes. Now, the access point is at 1152 bytes. Simple math tells me we're 128 bytes into this `flow` buffer. I'm going to have to check the definition of `struct tty_struct_flow` now to see what's happening at this offset. It'll give me a clearer picture of what's happening.
|
| 70/2 |
2026/06/01 19:29 |
tool |
codesearch-struct-layout |
0m
Error:
Args: map[ContextFile:drivers/tty/tty_io.c Name:tty_struct_flow]
Results:
|
| 71/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 46490
output: 34
thoughts: 36
Thoughts: **Debugging a Possible Type Mismatch**
Okay, so I'm hitting a snag here, and my initial gut feeling is that this might be an issue with an anonymous struct, or perhaps I've simply made a typo somewhere in the code. Best way to verify this: I need to quickly confirm the correct structure definition. So, let me just double-check that `tty_struct` definition. Right, into the kernel headers we go β specifically, I'll be consulting `include/linux/tty.h`. That should have everything I need to clear this up.
|
| 72/2 |
2026/06/01 19:29 |
tool |
read-file |
0m
Args: map[File:include/linux/tty.h FirstLine:1 LineCount:100]
Results: map[Contents: 1: /* SPDX-License-Identifier: GPL-2.0 */
2: #ifndef _LINUX_TTY_H
3: #define _LINUX_TTY_H
4:
5: #include <linux/fs.h>
6: #include <linux/major.h>
7: #include <linux/termios.h>
8: #include <linux/workqueue.h>
9: #include <linux/tty_driver.h>
10: #include <linux/tty_ldisc.h>
11: #include <linux/tty_port.h>
12: #include <linux/mutex.h>
13: #include <linux/tty_flags.h>
14: #include <uapi/linux/tty.h>
15: #include <linux/rwsem.h>
16: #include <linux/llist.h>
17:
18:
19: /*
20: * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
21: * hardcoded at present.)
22: */
23: #define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
24: #define NR_UNIX98_PTY_RESERVE 1024 /* Default reserve for main devpts */
25: #define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
26:
27: /*
28: * This character is the same as _POSIX_VDISABLE: it cannot be used as
29: * a c_cc[] character, but indicates that a particular special character
30: * isn't in use (eg VINTR has no character etc)
31: */
32: #define __DISABLED_CHAR '\0'
33:
34: #define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
35: #define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
36: #define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
37: #define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
38: #define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
39: #define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
40: #define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
41: #define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
42: #define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
43: #define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
44: #define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
45: #define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
46: #define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
47: #define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
48: #define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
49: #define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
50: #define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
51:
52: #define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
53: #define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
54: #define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
55: #define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
56:
57: #define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
58: #define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
59: #define I_IGNPAR(tty) _I_FLAG((tty), IGNPAR)
60: #define I_PARMRK(tty) _I_FLAG((tty), PARMRK)
61: #define I_INPCK(tty) _I_FLAG((tty), INPCK)
62: #define I_ISTRIP(tty) _I_FLAG((tty), ISTRIP)
63: #define I_INLCR(tty) _I_FLAG((tty), INLCR)
64: #define I_IGNCR(tty) _I_FLAG((tty), IGNCR)
65: #define I_ICRNL(tty) _I_FLAG((tty), ICRNL)
66: #define I_IUCLC(tty) _I_FLAG((tty), IUCLC)
67: #define I_IXON(tty) _I_FLAG((tty), IXON)
68: #define I_IXANY(tty) _I_FLAG((tty), IXANY)
69: #define I_IXOFF(tty) _I_FLAG((tty), IXOFF)
70: #define I_IMAXBEL(tty) _I_FLAG((tty), IMAXBEL)
71: #define I_IUTF8(tty) _I_FLAG((tty), IUTF8)
72:
73: #define O_OPOST(tty) _O_FLAG((tty), OPOST)
74: #define O_OLCUC(tty) _O_FLAG((tty), OLCUC)
75: #define O_ONLCR(tty) _O_FLAG((tty), ONLCR)
76: #define O_OCRNL(tty) _O_FLAG((tty), OCRNL)
77: #define O_ONOCR(tty) _O_FLAG((tty), ONOCR)
78: #define O_ONLRET(tty) _O_FLAG((tty), ONLRET)
79: #define O_OFILL(tty) _O_FLAG((tty), OFILL)
80: #define O_OFDEL(tty) _O_FLAG((tty), OFDEL)
81: #define O_NLDLY(tty) _O_FLAG((tty), NLDLY)
82: #define O_CRDLY(tty) _O_FLAG((tty), CRDLY)
83: #define O_TABDLY(tty) _O_FLAG((tty), TABDLY)
84: #define O_BSDLY(tty) _O_FLAG((tty), BSDLY)
85: #define O_VTDLY(tty) _O_FLAG((tty), VTDLY)
86: #define O_FFDLY(tty) _O_FLAG((tty), FFDLY)
87:
88: #define C_BAUD(tty) _C_FLAG((tty), CBAUD)
89: #define C_CSIZE(tty) _C_FLAG((tty), CSIZE)
90: #define C_CSTOPB(tty) _C_FLAG((tty), CSTOPB)
91: #define C_CREAD(tty) _C_FLAG((tty), CREAD)
92: #define C_PARENB(tty) _C_FLAG((tty), PARENB)
93: #define C_PARODD(tty) _C_FLAG((tty), PARODD)
94: #define C_HUPCL(tty) _C_FLAG((tty), HUPCL)
95: #define C_CLOCAL(tty) _C_FLAG((tty), CLOCAL)
96: #define C_CIBAUD(tty) _C_FLAG((tty), CIBAUD)
97: #define C_CRTSCTS(tty) _C_FLAG((tty), CRTSCTS)
98: #define C_CMSPAR(tty) _C_FLAG((tty), CMSPAR)
99:
100: #define L_ISIG(tty) _L_FLAG((tty), ISIG)
]
|
| 73/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 48965
output: 33
thoughts: 13
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Diving into the `tty_struct` Definition**
Alright, let's get down to brass tacks. I need to get a clear picture of how this `tty_struct` is defined. This is fundamental, the central structure for terminal management in the kernel, so understanding its layout is crucial. I'm thinking I'll need to locate the authoritative source β the header file where it's declared. Probably `include/linux/tty.h`, but I'll double-check to be certain. Getting that definition will let me see all the fields involved, the data types, and any relevant comments. I'm after things like line discipline pointers, flags, input/output buffers, termios configuration, and all the rest. Itβs the skeleton key for understanding the lifecycle and characteristics of a terminal instance within the system. I need to have a concrete grasp of all the pieces.
|
| 74/2 |
2026/06/01 19:29 |
tool |
grepper |
0m
Error:
Args: map[Expression:struct tty_struct { PathPrefix:include/linux/tty.h]
Results:
|
| 75/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 49249
output: 33
thoughts: 15
Thoughts: Here's the summary, framed as your internal thoughts:
**Concerning a Recent Parsing Error**
Okay, so I messed up. Looking back, the simplest solution was staring me right in the face. Instead of getting bogged down in the intricacies of the parsing logic, I should have realized that a simple escape sequence for the problematic brace character would have fixed the issue immediately. Or, even better, I could have used `grep` to quickly find the relevant name. That would have bypassed the complex parsing altogether. Next time, I need to remember to prioritize those straightforward approaches before diving into complex manipulations. I need to be more mindful of these basic debugging techniques.
|
| 76/2 |
2026/06/01 19:29 |
tool |
grepper |
0m
Args: map[Expression:struct tty_struct \{ PathPrefix:include/linux/tty.h]
Results: map[Output:include/linux/tty.h=119=struct tty_operations;
--
include/linux/tty.h-187- */
include/linux/tty.h:188:struct tty_struct {
include/linux/tty.h-189- struct kref kref;
]
|
| 77/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 49518
output: 35
thoughts: 90
Thoughts: Here's my summary, as though I'm thinking through this code snippet:
**Diving into the `tty_struct` - Flow Control Concerns**
Okay, I'm looking at this `tty_struct` definition. Right, it's a critical structure. Let's see... lines 188 to 231... aha! There's a nested structure, `flow`, within it. I'm assuming this is related to flow control, judging by the name. Let's drill down: Spinlock, `lock`, that's typical for protecting shared access to these flags. Makes sense. Then we have `stopped` and `tco_stopped`, both booleans. These are the flags I'm interested in. `stopped` sounds like a general flow control state, but I wonder what `tco_stopped` stands for? Is this related to terminal output? Probably is. And finally, some unused space, for alignment or future expansion, likely. It seems like the basic mechanisms for controlling data flow are centered around those two boolean flags protected by a spinlock. Seems fairly standard. Now, I want to see what these flags mean in the context of the whole tty driver.
|
| 78/2 |
2026/06/01 19:29 |
tool |
read-file |
0m
Args: map[File:include/linux/tty.h FirstLine:220 LineCount:20]
Results: map[Contents: 220: spinlock_t lock;
221: unsigned char pktstatus;
222: bool packet;
223: } ctrl;
224:
225: bool hw_stopped;
226: bool closing;
227: int flow_change;
228:
229: struct tty_struct *link;
230: struct fasync_struct *fasync;
231: wait_queue_head_t write_wait;
232: wait_queue_head_t read_wait;
233: struct work_struct hangup_work;
234: void *disc_data;
235: void *driver_data;
236: spinlock_t files_lock;
237: int write_cnt;
238: u8 *write_buf;
239:
]
|
| 79/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 50160
output: 35
thoughts: 12
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience:
**Missing the Mark: Recalibration Needed**
Damn it. I was so sure I was on the right track, but I've clearly overlooked something fundamental β the concept of `flow`. It's crucial, and I'm kicking myself for not catching it earlier. Time to backtrack. Let's rewind a bit and carefully re-examine the preceding analysis, specifically looking for where I may have dropped the ball and failed to incorporate `flow` into the equation. It's a critical element, and I need to ensure its presence in the model. This means a more precise, and frankly, more comprehensive review.
|
| 80/2 |
2026/06/01 19:29 |
tool |
read-file |
0m
Args: map[File:include/linux/tty.h FirstLine:200 LineCount:30]
Results: map[Contents: 200: struct mutex legacy_mutex;
201: struct mutex throttle_mutex;
202: struct rw_semaphore termios_rwsem;
203: struct mutex winsize_mutex;
204: struct ktermios termios, termios_locked;
205: char name[64];
206: unsigned long flags;
207: int count;
208: unsigned int receive_room;
209: struct winsize winsize;
210:
211: struct {
212: spinlock_t lock;
213: bool stopped;
214: bool tco_stopped;
215: } flow;
216:
217: struct {
218: struct pid *pgrp;
219: struct pid *session;
220: spinlock_t lock;
221: unsigned char pktstatus;
222: bool packet;
223: } ctrl;
224:
225: bool hw_stopped;
226: bool closing;
227: int flow_change;
228:
229: struct tty_struct *link;
]
|
| 81/2 |
2026/06/01 19:29 |
llm |
expert |
0m
Model:
Tokens:
input: 50713
output: 38
thoughts: 5332
Thoughts: **Analysis of a TTY Use-After-Free Vulnerability**
Okay, here's the breakdown of what I've got. The crash report nails it; we're dealing with a classic use-after-free in the TTY subsystem. The report shows a read of size 1 at a specific address, located within a freed memory region. The offset analysis confirms the access is within the `flow` structure of a `tty_struct`. This memory is freed. The key culprit is a race condition.
Looking at the code, specifically the `kbd_keycode` function (and subsequently, `fn_hold`), there's an unchecked access to `vc->port.tty`. This `tty` pointer can become invalid because the corresponding `tty_struct` is freed concurrently. The `tty` is associated with a virtual terminal (VT) via `vc_data` and the lifetime of the `tty_struct` depends on open file descriptors. The virtual console's tty is destroyed when the last file descriptor is closed.
Here's the race: an input event injected via `/dev/input/eventX` (evdev) ultimately triggers `kbd_keycode`, which grabs a pointer to the tty. Meanwhile, `tty_release` gets called, which leads to `con_shutdown` (which sets `vc->port.tty` to NULL) and then, later, the memory is freed using the `tty_kref_put` function in `release_tty` function which is queued as a work item using `kfree`. The problem is that there is a window between these operations. `kbd_keycode`, however, does not take a reference or hold a lock. So, the window exists for this race. Since the UAF occurs in the spinlock, it happens in line 765 in `stop_tty`, accessing `tty->flow.lock` after the `tty_struct` is freed, even if the code calls `stop_tty` successfully, which is why it is later accessing line 766 in `__stop_tty` after the UAF happens.
The crash report includes the full call stacks. The access stack goes from the UAF to `kbd_event` through `fn_hold` and then `stop_tty`. The free stack traces back to `kfree` and `release_one_tty` which is queued by `release_tty`. The allocation stack confirms `tty_init_dev` and `alloc_tty_struct`. Critically, we see how the last related work creation connects the free with `tty_release`. This is all consistent, and the report shows that the crash is in the VT/TTY subsystem. `release_tty` calls `tty_kref_put` after calling `con_shutdown`.
The race arises because `kbd_keycode` accesses `vc->port.tty` without any protection (locks or reference counting). `kbd_keycode` reads the tty pointer, and then later function calls (e.g., `fn_hold`) make a subsequent access, resulting in a use-after-free when `release_one_tty` runs. The `kbd_event_lock` *is* taken, but that doesn't protect the specific race with `tty_release`. The `tty_port` doesn't keep the tty alive, its life time is the lifetime of the file descriptors.
The `fg_console` variable plays a role since it's the current active console's tty that is subject to this race.
The fix seems to be using `tty_port_tty_get(&vc->port)` when accessing `vc->port.tty` to take a reference. This would ensure that the `tty_struct` remains valid for the duration of the operation. This report is definitely actionable, consistent, and highlights a clear vulnerability in the TTY code that needs addressing.
|
| 82/2 |
2026/06/01 19:30 |
tool |
read-file |
0m
Args: map[File:drivers/tty/vt/keyboard.c FirstLine:1420 LineCount:20]
Results: map[Contents:1420: put_queue(vc, data);
1421: }
1422:
1423: static void kbd_keycode(unsigned int keycode, int down, bool hw_raw)
1424: {
1425: struct vc_data *vc = vc_cons[fg_console].d;
1426: unsigned short keysym, *key_map;
1427: unsigned char type;
1428: bool raw_mode;
1429: struct tty_struct *tty;
1430: int shift_final;
1431: struct keyboard_notifier_param param = { .vc = vc, .value = keycode, .down = down };
1432: int rc;
1433:
1434: tty = vc->port.tty;
1435:
1436: if (tty && (!tty->driver_data)) {
1437: /* No driver data? Strange. Okay we fix it then. */
1438: tty->driver_data = vc;
1439: }
]
|
| 83/2 |
2026/06/01 19:30 |
llm |
expert |
0m
Model:
Tokens:
input: 57212
output: 15
thoughts: 1894
Thoughts: **Actionable Bug Report Analysis**
Okay, let's break this down. No need to worry about locking or refcounting initially, let's just trace the execution flow. I need to re-examine `tty_release` to be sure. Alright, let's see: `tty_release` calls `tty_release_struct`, which in turn calls `release_tty`. `release_tty` then goes on to call `con_shutdown`, and *that* sets `vc->port.tty = NULL`. So, that's the point of release.
Now, if `kbd_keycode` was using `tty_port_tty_get` to get the tty from the port, it would look like it takes a reference. However, it doesn't.
But wait, I see `tty_port_tty_get` is used in other places like `serial_core.c` in the kernel to safely get the tty from a port. Good. That's a strong indication this report is valid and points to a real issue.
Let's make sure everything in the report aligns: a `BUG: KASAN: slab-use-after-free in stop_tty`, a read of size 1, matching allocation/free tasks, and the last related work creation being `tty_release`. Yep, it all lines up.
Just one thing - there's a reference to the physical page and its allocation/free too. KASAN also tracks slab object allocation/free, which I looked at first. The slab object stacks are consistent, and that's the more relevant information. It also mentions the page allocation/free stacks, which show it was used by `neigh_sysctl_register` and freed. That's normal for slab.
Wait, that page free stack is interesting. It shows the page going back to the slab allocator. The report is looking solid.
Checking the call chain: `stop_tty` is called by `fn_hold`, which is called by `kbd_keycode`, which in turn is called by `kbd_event` - the input event handler. `kbd_event` is called by `input_handle_events_default`. That is correct.
The tty being accessed is indeed the one that was freed, as a result of `tty_release` being called from closing the last FD, and it seems to be a VT tty from the `tty_init_dev` call.
Now, the allocation stack confirms `tty_open` -> `tty_open_by_driver` -> `tty_init_dev`. Consistent with opening a TTY. The free stack confirms `kfree` -> `release_one_tty` in a workqueue. This all fits.
Okay, let's double check the line numbers for `stop_tty` and `__stop_tty` one last time. Line numbers for both are correct.
Now, I want to make sure the tty isn't NULL in `stop_tty`. Nope, no NULL check there, but `fn_hold` *does* check for a NULL tty. If the tty was NULL, `stop_tty` wouldn't be called. So the issue is definitely the tty *not* being NULL, but being freed.
The report is absolutely actionable.
The bug report shows a use-after-free in `stop_tty`, which is called within the TTY subsystem in `drivers/tty/vt/keyboard.c`. The `tty_struct` was allocated by `tty_open` and freed by a workqueue after `tty_release`. The root cause is a race condition where `kbd_keycode` and `fn_hold` access `vc->port.tty` without an appropriate reference (kref), meaning the `tty_struct` can be freed while still being used by the keyboard event handler. The report is internally consistent, with all three necessary stack traces being included, and it clearly points to the same `tty_struct` object.
One final sanity check, `syz.1.2/5837` is the task triggering the access. It's doing `evdev_write` which calls `input_inject_event`. That is syzkaller's typical method for triggering input-related bugs.
This is actionable.
|
| 84/2 |
2026/06/01 19:30 |
tool |
set-results |
0m
Args:
Results:
|
| 85/2 |
2026/06/01 19:30 |
llm |
expert |
0m
Model:
Tokens:
input: 60056
output: 715
thoughts: 14
Thoughts: Okay, here's the summary, expressed as though I'm the one having these thoughts, keeping in mind I'm speaking to an expert:
**Actionable Insights Confirmed**
Alright, the analysis is wrapped up. I've gone through it meticulously, cross-referencing all the data and checking for any potential inconsistencies. And, as I suspected, the findings are robust and, more importantly, they are completely actionable. We can move forward with confidence knowing the report's conclusions are consistent with the data. We have a clear path ahead.
|
| 86/1 |
2026/06/01 19:30 |
action |
format-explanation |
0m
Results: map[Explanation:The bug report describes a use-after-free (UAF) vulnerability in the `stop_tty`
function within the TTY subsystem. The report is highly consistent and
actionable, providing all three necessary stack traces: the bad memory access,
the heap block allocation, and the heap block free stack.
### Analysis of the Stack Traces:
1. **Access Stack**: The UAF occurs in `stop_tty` (specifically in the inlined
`__stop_tty` at `drivers/tty/tty_io.c:742`), which is called from `fn_hold` in
`drivers/tty/vt/keyboard.c`. This is triggered by a keyboard event (`kbd_event`
-> `kbd_keycode`) initiated by a user-space task (`syz.1.2/5837`) writing to an
`evdev` device (`evdev_write`).
2. **Allocation Stack**: The `tty_struct` was allocated by task 5835 during a
`tty_open` operation, which calls `tty_init_dev` and `alloc_tty_struct`.
3. **Free Stack**: The `tty_struct` was freed by a workqueue worker (task 5800)
executing `release_one_tty`. The "Last potentially related work creation" stack
confirms that this work was queued during `tty_release` (when the last file
descriptor to the TTY was closed).
### Root Cause:
The root cause is a race condition between the TTY release process and the
keyboard event handler. In `drivers/tty/vt/keyboard.c`, the functions
`kbd_keycode` and `fn_hold` obtain a pointer to the `tty_struct` directly from
`vc->port.tty` without taking a reference count (kref).
```c
// drivers/tty/vt/keyboard.c
tty = vc->port.tty;
...
(*k_handler[type])(vc, KVAL(keysym), !down); // calls fn_hold
```
While `release_tty` (called during `tty_release`) does call `con_shutdown` to
set `vc->port.tty = NULL`, it does so just before dropping the final reference.
If `kbd_keycode` or `fn_hold` reads the pointer just before it's cleared, and
then the `tty_struct` is freed by the workqueue before the keyboard handler
finishes using it, a UAF occurs.
### Consistency and Actionability:
- **Consistent Object**: All three stacks correctly refer to a `tty_struct`
(allocated in `alloc_tty_struct`, freed in `free_tty_struct`).
- **Consistent Subsystem**: The bug is entirely contained within the TTY and
VT (Virtual Terminal) subsystems.
- **Clear Mechanism**: The mechanism of the failure (race between
`tty_release` and `kbd_event`) is well-supported by the provided stacks and the
kernel source code.
- **Actionable**: The report provides enough information to identify the
missing refcounting in `drivers/tty/vt/keyboard.c` as the likely fix (e.g.,
using `tty_port_tty_get()` instead of direct access).
The report is self-consistent and provides all the necessary information to root
cause the bug.]
|