| 0/0 |
2026/09/09 20:27 |
flow |
patching |
1h16m
Results: map[AckedBy:[] Fixes:map[AuthorEmail:neilb@suse.de AuthorName:NeilBrown Hash:91adb56473febeeb3ef657bb5147ddd355465700 Title:md/raid5: refactor raid5 "run"] KernelBranch:master KernelCommit:df2908090cda368b01ff43709f51890076c56157 KernelRepo:git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git PatchDescription:md: clear pending reshape parameters in __md_stop()
When reconfiguring an active MD array (for instance, updating the number of
disks via the raid_disks sysfs attribute), pending reshape parameters such
as delta_disks, new_level, new_layout, and new_chunk_sectors are stored in
struct mddev. At this stage, the reshape has not yet started running and
mddev->reshape_position remains set to MaxSector.
If userspace deactivates or stops the array before the reshape begins (such
as by writing "inactive" to array_state), do_md_stop() invokes __md_stop().
Unlike a full stop which invokes md_clean() to clear all configuration
fields, __md_stop() detaches the personality and frees private data but
leaves the pending reshape parameters in struct mddev. When the array is
later restarted (e.g. by writing "active" to array_state), md_run() calls
the personality's run method, raid5_run(). Because mddev->reshape_position
is still MaxSector, raid5_run() assumes no reshape is taking place and
expects no pending reshape parameters, causing BUG_ON(mddev->delta_disks !=
0) to trigger:
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by clearing pending reshape parameters in __md_stop() if no
reshape is currently running (mddev->reshape_position == MaxSector).
Specifically, reset delta_disks and reshape_backwards to 0, and reset
new_level, new_layout, and new_chunk_sectors to level, layout, and
chunk_sectors, respectively. If a reshape is actively in progress
(mddev->reshape_position != MaxSector), the parameters are preserved so the
reshape can resume when the array is restarted. PatchDiff:diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
Recipients:[map[Email:linux-kernel@vger.kernel.org Name: To:false] map[Email:linux-raid@vger.kernel.org Name: To:true] map[Email:magiclinan@didiglobal.com Name:Li Nan To:false] map[Email:song@kernel.org Name:Song Liu To:true] map[Email:xiao@kernel.org Name:Xiao Ni To:false] map[Email:yukuai@fygo.io Name:Yu Kuai To:true] map[Email:neilb@suse.de Name:NeilBrown To:true]] ReportedBy:[] ReviewedBy:[] SuggestedBy:[] TestedBy:[]]
|
| 1/1 |
2026/09/09 20:27 |
action |
base-commit-picker |
0m
Results: map[KernelBranch:master KernelCommit:df2908090cda368b01ff43709f51890076c56157 KernelRepo:git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git]
|
| 2/1 |
2026/09/09 20:27 |
action |
syz-repro-to-c-repro |
0m
Results: map[SimplifiedCRepro:#define _GNU_SOURCE
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <linux/loop.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <errno.h>
int setup_loop(int index) {
char path[256];
sprintf(path, "/tmp/disk%d", index);
int fd = open(path, O_RDWR | O_CREAT | O_TRUNC, 0644);
if (fd < 0) {
printf("[-] Failed to open backing file %s: %s\n", path, strerror(errno));
exit(1);
}
if (ftruncate(fd, 10 * 1024 * 1024) < 0) {
printf("[-] Failed to ftruncate: %s\n", strerror(errno));
exit(1);
}
int cfd = open("/dev/loop-control", O_RDWR);
if (cfd < 0) {
printf("[-] Failed to open loop-control: %s\n", strerror(errno));
exit(1);
}
int loop_num = ioctl(cfd, LOOP_CTL_GET_FREE);
close(cfd);
if (loop_num < 0) {
printf("[-] LOOP_CTL_GET_FREE failed: %s\n", strerror(errno));
exit(1);
}
sprintf(path, "/dev/loop%d", loop_num);
int loop_fd = open(path, O_RDWR);
if (loop_fd < 0) {
if (mknod(path, S_IFBLK | 0644, makedev(7, loop_num)) < 0 && errno != EEXIST) {
printf("[-] Failed to mknod %s: %s\n", path, strerror(errno));
exit(1);
}
loop_fd = open(path, O_RDWR);
if (loop_fd < 0) {
printf("[-] Failed to open loop device %s: %s\n", path, strerror(errno));
exit(1);
}
}
if (ioctl(loop_fd, LOOP_SET_FD, fd) < 0) {
printf("[-] LOOP_SET_FD failed: %s\n", strerror(errno));
exit(1);
}
close(loop_fd);
close(fd);
printf("[+] Setup loop%d\n", loop_num);
return loop_num;
}
void write_file(const char *path, const char *val) {
int fd;
int retries = 50;
while (retries--) {
fd = open(path, O_WRONLY);
if (fd < 0) {
printf("[-] Failed to open %s: %s\n", path, strerror(errno));
exit(1);
}
if (write(fd, val, strlen(val)) >= 0) {
close(fd);
printf("[+] Wrote '%s' to %s\n", val, path);
return;
}
if (errno != EBUSY) {
printf("[-] Failed to write '%s' to %s: %s\n", val, path, strerror(errno));
exit(1);
}
close(fd);
usleep(100000); // 100ms
}
printf("[-] Failed to write '%s' to %s after retries (EBUSY)\n", val, path);
exit(1);
}
int main() {
printf("[*] Setting up loop devices...\n");
int l1 = setup_loop(1);
int l2 = setup_loop(2);
int l3 = setup_loop(3);
int l4 = setup_loop(4);
printf("[*] Creating md array...\n");
write_file("/sys/module/md_mod/parameters/new_array", "md123");
write_file("/sys/block/md123/md/level", "raid5");
write_file("/sys/block/md123/md/chunk_size", "4096");
write_file("/sys/block/md123/md/raid_disks", "3");
char buf[256];
char path[256];
printf("[*] Adding devices to array...\n");
sprintf(buf, "7:%d", l1);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l1);
write_file(path, "0");
sprintf(buf, "7:%d", l2);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l2);
write_file(path, "1");
sprintf(buf, "7:%d", l3);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l3);
write_file(path, "2");
// Add l4 as a spare (no slot assigned)
sprintf(buf, "7:%d", l4);
write_file("/sys/block/md123/md/new_dev", buf);
printf("[*] Skipping initial sync...\n");
write_file("/sys/block/md123/md/resync_start", "none");
printf("[*] Starting array...\n");
write_file("/sys/block/md123/md/array_state", "active");
// Wait a bit to ensure array is fully active and any background threads have settled
sleep(1);
printf("[*] Freezing sync thread...\n");
write_file("/sys/block/md123/md/sync_action", "frozen");
printf("[*] Changing raid_disks to 4...\n");
write_file("/sys/block/md123/md/raid_disks", "4");
printf("[*] Stopping array...\n");
write_file("/sys/block/md123/md/array_state", "inactive");
printf("[*] Restarting array to trigger BUG...\n");
write_file("/sys/block/md123/md/array_state", "active");
// Wait for asynchronous BUG to trigger if any
sleep(3);
printf("[+] Done. If the kernel didn't crash, the bug was not triggered.\n");
return 0;
}
]
|
| 3/1 |
2026/09/09 20:28 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/9d22f3af01dc24fa8887cb4af37a784370af643b]
|
| 4/1 |
2026/09/09 20:28 |
action |
kernel-builder |
0m
Results: map[KernelObj:/app/workdir/cache/build/7e5f7419de6367f693fb76fc08c369b1b1daab16]
|
| 5/1 |
2026/09/09 20:28 |
action |
crash-reproducer |
1m
Results: map[OtherCrashReports:<nil> ReproducedBugTitle:kernel BUG in raid5_run ReproducedCrashReport:md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
ReproducedFaultInjection:]
|
| 6/1 |
2026/09/09 20:29 |
action |
codesearch-prepare |
0m
Results: map[Index:codesearch-index]
|
| 7/1 |
2026/09/09 20:30 |
agent |
debugger |
4m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with debugging a kernel crash root cause.
You need to provide a detailed explanation of the root cause for another developer to be
able to write a fix for the bug based on your explanation. Include all relevant details
into the response: function/struct/field/etc names, code snippets, line numbers,
macro/enum values, etc.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash is:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The following C code is a draft of the vulnerable syscall sequence. Keep in mind that
it may lack the precise threading, sandboxing, and some arguments of a working reproducer:
#define _GNU_SOURCE
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <linux/loop.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <errno.h>
int setup_loop(int index) {
char path[256];
sprintf(path, "/tmp/disk%d", index);
int fd = open(path, O_RDWR | O_CREAT | O_TRUNC, 0644);
if (fd < 0) {
printf("[-] Failed to open backing file %s: %s\n", path, strerror(errno));
exit(1);
}
if (ftruncate(fd, 10 * 1024 * 1024) < 0) {
printf("[-] Failed to ftruncate: %s\n", strerror(errno));
exit(1);
}
int cfd = open("/dev/loop-control", O_RDWR);
if (cfd < 0) {
printf("[-] Failed to open loop-control: %s\n", strerror(errno));
exit(1);
}
int loop_num = ioctl(cfd, LOOP_CTL_GET_FREE);
close(cfd);
if (loop_num < 0) {
printf("[-] LOOP_CTL_GET_FREE failed: %s\n", strerror(errno));
exit(1);
}
sprintf(path, "/dev/loop%d", loop_num);
int loop_fd = open(path, O_RDWR);
if (loop_fd < 0) {
if (mknod(path, S_IFBLK | 0644, makedev(7, loop_num)) < 0 && errno != EEXIST) {
printf("[-] Failed to mknod %s: %s\n", path, strerror(errno));
exit(1);
}
loop_fd = open(path, O_RDWR);
if (loop_fd < 0) {
printf("[-] Failed to open loop device %s: %s\n", path, strerror(errno));
exit(1);
}
}
if (ioctl(loop_fd, LOOP_SET_FD, fd) < 0) {
printf("[-] LOOP_SET_FD failed: %s\n", strerror(errno));
exit(1);
}
close(loop_fd);
close(fd);
printf("[+] Setup loop%d\n", loop_num);
return loop_num;
}
void write_file(const char *path, const char *val) {
int fd;
int retries = 50;
while (retries--) {
fd = open(path, O_WRONLY);
if (fd < 0) {
printf("[-] Failed to open %s: %s\n", path, strerror(errno));
exit(1);
}
if (write(fd, val, strlen(val)) >= 0) {
close(fd);
printf("[+] Wrote '%s' to %s\n", val, path);
return;
}
if (errno != EBUSY) {
printf("[-] Failed to write '%s' to %s: %s\n", val, path, strerror(errno));
exit(1);
}
close(fd);
usleep(100000); // 100ms
}
printf("[-] Failed to write '%s' to %s after retries (EBUSY)\n", val, path);
exit(1);
}
int main() {
printf("[*] Setting up loop devices...\n");
int l1 = setup_loop(1);
int l2 = setup_loop(2);
int l3 = setup_loop(3);
int l4 = setup_loop(4);
printf("[*] Creating md array...\n");
write_file("/sys/module/md_mod/parameters/new_array", "md123");
write_file("/sys/block/md123/md/level", "raid5");
write_file("/sys/block/md123/md/chunk_size", "4096");
write_file("/sys/block/md123/md/raid_disks", "3");
char buf[256];
char path[256];
printf("[*] Adding devices to array...\n");
sprintf(buf, "7:%d", l1);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l1);
write_file(path, "0");
sprintf(buf, "7:%d", l2);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l2);
write_file(path, "1");
sprintf(buf, "7:%d", l3);
write_file("/sys/block/md123/md/new_dev", buf);
sprintf(path, "/sys/block/md123/md/dev-loop%d/slot", l3);
write_file(path, "2");
// Add l4 as a spare (no slot assigned)
sprintf(buf, "7:%d", l4);
write_file("/sys/block/md123/md/new_dev", buf);
printf("[*] Skipping initial sync...\n");
write_file("/sys/block/md123/md/resync_start", "none");
printf("[*] Starting array...\n");
write_file("/sys/block/md123/md/array_state", "active");
// Wait a bit to ensure array is fully active and any background threads have settled
sleep(1);
printf("[*] Freezing sync thread...\n");
write_file("/sys/block/md123/md/sync_action", "frozen");
printf("[*] Changing raid_disks to 4...\n");
write_file("/sys/block/md123/md/raid_disks", "4");
printf("[*] Stopping array...\n");
write_file("/sys/block/md123/md/array_state", "inactive");
printf("[*] Restarting array to trigger BUG...\n");
write_file("/sys/block/md123/md/array_state", "active");
// Wait for asynchronous BUG to trigger if any
sleep(3);
printf("[+] Done. If the kernel didn't crash, the bug was not triggered.\n");
return 0;
}
Reply: An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
|
| 8/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 8054
output: 37
thoughts: 111
Thoughts: **Investigating a RAID5 Kernel Bug**
Okay, so I've got a kernel bug, and it seems to be in `drivers/md/raid5.c` at line 8117. The crash specifically occurs within the `raid5_run` function. The call trace, thankfully, gives me a clear path: `md_run` -> `do_md_run` -> `array_state_store` -> `md_attr_store` -> `kernfs_fop_write_iter` -> `vfs_write`. That's a pretty straightforward sequence; it gives me a reasonable starting point. My next move is obvious: I need to dive into `drivers/md/raid5.c` and take a good look around line 8117. Time to figure out what's going on.
|
| 9/2 |
2026/09/09 20:30 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8100 LineCount:50]
Results: map[Contents:8100: }
8101: } else if (mddev->reshape_backwards
8102: ? (here_new * chunk_sectors + min_offset_diff <=
8103: here_old * chunk_sectors)
8104: : (here_new * chunk_sectors >=
8105: here_old * chunk_sectors + (-min_offset_diff))) {
8106: /* Reading from the same stripe as writing to - bad */
8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
8108: mdname(mddev));
8109: return -EINVAL;
8110: }
8111: pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
8112: /* OK, we should be able to continue; */
8113: } else {
8114: BUG_ON(mddev->level != mddev->new_level);
8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
8120: if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
8121: test_bit(MD_HAS_PPL, &mddev->flags)) {
8122: pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
8123: mdname(mddev));
8124: clear_bit(MD_HAS_PPL, &mddev->flags);
8125: clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
8126: }
8127:
8128: if (mddev->private == NULL)
8129: conf = setup_conf(mddev);
8130: else
8131: conf = mddev->private;
8132:
8133: if (IS_ERR(conf))
8134: return PTR_ERR(conf);
8135:
8136: if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
8137: if (!journal_dev) {
8138: pr_warn("md/raid:%s: journal disk is missing, force array readonly\n",
8139: mdname(mddev));
8140: mddev->ro = 1;
8141: set_disk_ro(mddev->gendisk, 1);
8142: } else if (mddev->resync_offset == MaxSector)
8143: set_bit(MD_JOURNAL_CLEAN, &mddev->flags);
8144: }
8145:
8146: conf->min_offset_diff = min_offset_diff;
8147: rcu_assign_pointer(mddev->thread, conf->thread);
8148: rcu_assign_pointer(conf->thread, NULL);
8149: mddev->private = conf;
]
|
| 10/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 9275
output: 37
thoughts: 43
Thoughts: Here's my analysis of the situation:
**Investigating a RAID5 Error**
Okay, so I've hit a snag. The kernel's thrown a `BUG_ON` specifically at line 8117 within the `raid5_run` function. The culprit? `mddev->delta_disks != 0`. This tells me that somehow the difference between the expected number of disks and the actual number of disks is non-zero, and the code isn't designed to handle that state at this point. That `BUG_ON` is there for a reason, likely a critical consistency check. Let me zoom out and examine the surrounding context within `raid5_run`. I need to figure out how `delta_disks` is supposed to be calculated, what values are permissible at this stage in execution, and most importantly, *why* it's not zero right now. I suspect thereβs some subtle issue with disk addition/removal, possibly related to re-sync or device state changes that are going on concurrently. Time to delve into the data structures and figure this out.
|
| 11/2 |
2026/09/09 20:30 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8050 LineCount:50]
Results: map[Contents:8050: int new_data_disks;
8051:
8052: if (journal_dev) {
8053: pr_warn("md/raid:%s: don't support reshape with journal - aborting.\n",
8054: mdname(mddev));
8055: return -EINVAL;
8056: }
8057:
8058: if (mddev->new_level != mddev->level) {
8059: pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",
8060: mdname(mddev));
8061: return -EINVAL;
8062: }
8063: old_disks = mddev->raid_disks - mddev->delta_disks;
8064: /* reshape_position must be on a new-stripe boundary, and one
8065: * further up in new geometry must map after here in old
8066: * geometry.
8067: * If the chunk sizes are different, then as we perform reshape
8068: * in units of the largest of the two, reshape_position needs
8069: * be a multiple of the largest chunk size times new data disks.
8070: */
8071: here_new = mddev->reshape_position;
8072: chunk_sectors = max(mddev->chunk_sectors, mddev->new_chunk_sectors);
8073: new_data_disks = mddev->raid_disks - max_degraded;
8074: if (sector_div(here_new, chunk_sectors * new_data_disks)) {
8075: pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n",
8076: mdname(mddev));
8077: return -EINVAL;
8078: }
8079: reshape_offset = here_new * chunk_sectors;
8080: /* here_new is the stripe we will write to */
8081: here_old = mddev->reshape_position;
8082: sector_div(here_old, chunk_sectors * (old_disks-max_degraded));
8083: /* here_old is the first stripe that we might need to read
8084: * from */
8085: if (mddev->delta_disks == 0) {
8086: /* We cannot be sure it is safe to start an in-place
8087: * reshape. It is only safe if user-space is monitoring
8088: * and taking constant backups.
8089: * mdadm always starts a situation like this in
8090: * readonly mode so it can take control before
8091: * allowing any writes. So just check for that.
8092: */
8093: if (abs(min_offset_diff) >= mddev->chunk_sectors &&
8094: abs(min_offset_diff) >= mddev->new_chunk_sectors)
8095: /* not really in-place - so OK */;
8096: else if (mddev->ro == 0) {
8097: pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n",
8098: mdname(mddev));
8099: return -EINVAL;
]
|
| 12/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 10500
output: 37
thoughts: 13
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving Deeper into `raid5_run`**
Okay, so we're talking about `raid5_run` again. But I need to go *deeper*. We've discussed the function's overall operation and flow, but I need to understand its behaviour even more intimately. I'm not satisfied with the high-level picture right now. I need to push the analysis further upstream, beyond our current focus within that routine. What are the *earlier* calls, the initialization, the setup - the precursors that directly influence the execution of the piece of code we're investigating? Understanding those dependencies will reveal more about the assumptions this function makes and the context it operates in. I need to understand this better. Let's see what we can find.
|
| 13/2 |
2026/09/09 20:30 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8000 LineCount:50]
Results: map[Contents:8000:
8001: if (mddev->resync_offset != MaxSector)
8002: pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
8003: mdname(mddev));
8004:
8005: rdev_for_each(rdev, mddev) {
8006: long long diff;
8007:
8008: if (test_bit(Journal, &rdev->flags)) {
8009: journal_dev = rdev;
8010: continue;
8011: }
8012: if (rdev->raid_disk < 0)
8013: continue;
8014: diff = (rdev->new_data_offset - rdev->data_offset);
8015: if (first) {
8016: min_offset_diff = diff;
8017: first = 0;
8018: } else if (mddev->reshape_backwards &&
8019: diff < min_offset_diff)
8020: min_offset_diff = diff;
8021: else if (!mddev->reshape_backwards &&
8022: diff > min_offset_diff)
8023: min_offset_diff = diff;
8024: }
8025:
8026: if ((test_bit(MD_HAS_JOURNAL, &mddev->flags) || journal_dev) &&
8027: (mddev->bitmap_info.offset || mddev->bitmap_info.file)) {
8028: pr_notice("md/raid:%s: array cannot have both journal and bitmap\n",
8029: mdname(mddev));
8030: return -EINVAL;
8031: }
8032:
8033: if (mddev->reshape_position != MaxSector) {
8034: /* Check that we can continue the reshape.
8035: * Difficulties arise if the stripe we would write to
8036: * next is at or after the stripe we would read from next.
8037: * For a reshape that changes the number of devices, this
8038: * is only possible for a very short time, and mdadm makes
8039: * sure that time appears to have past before assembling
8040: * the array. So we fail if that time hasn't passed.
8041: * For a reshape that keeps the number of devices the same
8042: * mdadm must be monitoring the reshape can keeping the
8043: * critical areas read-only and backed up. It will start
8044: * the array in read-only mode, so we check for that.
8045: */
8046: sector_t here_new, here_old;
8047: int old_disks;
8048: int max_degraded = (mddev->level == 6 ? 2 : 1);
8049: int chunk_sectors;
]
|
| 14/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 11556
output: 55
thoughts: 982
Thoughts: **Analyzing the RAID Reshape Logic**
Okay, so I'm looking at this code snippet, and my initial thought is, if `mddev->reshape_position` isn't `MaxSector`, we proceed with the reshape, which is expected. However, if it *is* equal to `MaxSector`, then the code seems to enforce strict consistency checks using `BUG_ON` calls to ensure that the array parameters haven't been altered. Namely, it checks `level`, `layout`, `chunk_sectors`, and, crucially in this case, `delta_disks`. If any of these differ from the new values, the kernel will panic.
Now, I'm trying to wrap my head around a reproducer. It sets up an MD array, RAID5, three disks, and then adds a spare. The interesting bit is when the `raid_disks` parameter is changed to 4. That sets `mddev->delta_disks` to 1. The array is then stopped and restarted. Aha, that's the key. Because the array is stopped after `delta_disks` is set and then restarted, and that is how to trigger the bug. So, the bug seems to hinge on `mddev->reshape_position` being `MaxSector` on restart, but somehow, `delta_disks` isn't zero. So the checks fail.
The sequence: array creation -> spare added -> initial sync skipped -> array active -> sync thread frozen -> `raid_disks` changed to 4. This means `mddev->delta_disks` becomes 1. Array inactive -> array active (restart).
I need to understand what state the reshape process is in when `raid_disks` is changed to 4. Does changing the number of disks initiate a reshape? Is this bug a race condition? If the reshape has not yet started, or perhaps it was interrupted, `mddev->reshape_position` will be equal to `MaxSector`. Let's dig deeper into the code executed when `raid_disks` is written. This is where the magic happens and this might provide a clue.
|
| 15/2 |
2026/09/09 20:30 |
tool |
codesearch-find-references |
0m
Error:
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:raid_disks SourceTreePrefix:drivers/md/md.c]
Results: map[References:<nil> TruncatedOutput:false]
|
| 16/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 13066
output: 34
thoughts: 22
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into sysfs and RAID Disks**
Right, `raid_disks`. That's a sysfs attribute, and my first instinct is to dig into the store function. I need to understand how this attribute is written to, how the data is validated (or not), and what the implications of a successful write are within the kernel. I'm going to track down that store function; it's the key to understanding the behavior and any potential gotchas with manipulating the `raid_disks` attribute. Let's see what we can find.
|
| 17/2 |
2026/09/09 20:30 |
tool |
grepper |
0m
Args: map[Expression:__ATTR.*raid_disks PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=4458=static struct md_sysfs_entry md_raid_disks =
drivers/md/md.c:4459:__ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
drivers/md/md.c-4460-
]
|
| 18/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 13361
output: 36
thoughts: 12
Thoughts: Okay, let's dive into this. Here's my take on those thoughts, as if they're my own:
**Analyzing `raid_disks_store`**
Alright, I'm going to start by taking a look at `raid_disks_store`. Given my understanding of storage systems, this likely represents a data structure or module responsible for managing the allocation and state of disks within a RAID configuration. My immediate questions are: What level of RAID does it support? How granular is its control? Is it handling the physical disk interface directly, or abstracted through some underlying layer? Are we talking about a software RAID implementation or is this intended for hardware RAID controllers? Does it incorporate any specific features for data integrity or performance optimization, such as drive failure handling or wear leveling? Let's see how it's structured to better understand its capabilities.
|
| 19/2 |
2026/09/09 20:30 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4400 LineCount:60]
Results: map[Contents:4400: __ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
4401:
4402: static ssize_t
4403: raid_disks_show(struct mddev *mddev, char *page)
4404: {
4405: if (mddev->raid_disks == 0)
4406: return 0;
4407: if (mddev->reshape_position != MaxSector &&
4408: mddev->delta_disks != 0)
4409: return sprintf(page, "%d (%d)\n", mddev->raid_disks,
4410: mddev->raid_disks - mddev->delta_disks);
4411: return sprintf(page, "%d\n", mddev->raid_disks);
4412: }
4413:
4414: static int update_raid_disks(struct mddev *mddev, int raid_disks);
4415:
4416: static ssize_t
4417: raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
4418: {
4419: unsigned int n;
4420: unsigned int noio_flags;
4421: int err;
4422:
4423: err = kstrtouint(buf, 10, &n);
4424: if (err < 0)
4425: return err;
4426:
4427: err = mddev_suspend_and_lock(mddev);
4428: if (err)
4429: return err;
4430: noio_flags = memalloc_noio_save();
4431: if (mddev->pers) {
4432: if (n != mddev->raid_disks)
4433: err = update_raid_disks(mddev, n);
4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
4439: rdev_for_each(rdev, mddev) {
4440: if (olddisks < n &&
4441: rdev->data_offset < rdev->new_data_offset)
4442: goto out_unlock;
4443: if (olddisks > n &&
4444: rdev->data_offset > rdev->new_data_offset)
4445: goto out_unlock;
4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
4451: } else
4452: mddev->raid_disks = n;
4453: out_unlock:
4454: memalloc_noio_restore(noio_flags);
4455: mddev_unlock_and_resume(mddev);
4456: return err ? err : len;
4457: }
4458: static struct md_sysfs_entry md_raid_disks =
4459: __ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
]
|
| 20/2 |
2026/09/09 20:30 |
llm |
debugger |
0m
Model:
Tokens:
input: 14597
output: 36
thoughts: 12
Thoughts: Okay, let's dive into this. Here's my take on those thoughts, as if they're my own:
**Analyzing the Function: `update_raid_disks`**
Alright, so the focus is on `update_raid_disks`. Immediately, I'm thinking about the implications. What kind of RAID configuration are we dealing with? Is it software-based, hardware-based, or a hybrid? The nuances change depending on the setup. Knowing the specific RAID level (RAID 0, 1, 5, 6, 10, etc.) is critical right off the bat; that dictates the complexity and potential risks of this update.
I need to understand what "updating" actually entails. Are we adding new disks, removing disks, replacing failed disks, expanding the existing array, or something else entirely? The input parameters to this function are going to be key. I'll be looking for clues in the function signature about what data it expects: disk identifiers, RAID controller information, new disk specifications, and so on.
My experience has taught me to anticipate potential failure scenarios. What error handling is built-in? Does it include robust checks for disk health, controller responsiveness, and data integrity? Is there a rollback mechanism in place if something goes wrong? RAID operations are inherently risky, and a poorly designed update routine could lead to data loss or array corruption. I'll be looking for proactive measures to mitigate those risks.
Beyond the core functionality, I'm also curious about performance considerations. Will this update disrupt normal I/O operations? Does it include any optimization strategies to minimize downtime or impact on performance? This is especially critical in production environments.
In the back of my mind, I'm already formulating questions: Is the configuration managed declaratively or imperatively? If declarative, can this update be expressed as a configuration change? If imperative, does this update involve any manual steps to initialize or synchronize disks before starting the operation? I want to see the approach: declarative is usually best, but some imperative processes are unavoidable.
Essentially, I want to see a well-defined and rigorously tested function, with attention to detail: error-checking, resilience, and performance optimization. It is crucial to have some visibility into its internal mechanisms to understand how it ensures a safe and stable RAID configuration update.
|
| 21/2 |
2026/09/09 20:31 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7500 LineCount:50]
Results: map[Contents:7500:
7501: if (info->major != MAJOR(dev) || info->minor != MINOR(dev))
7502: return -EOVERFLOW;
7503:
7504: if (!mddev->raid_disks) {
7505: int err;
7506: /* expecting a device which has a superblock */
7507: rdev = md_import_device(dev, mddev->major_version, mddev->minor_version);
7508: if (IS_ERR(rdev)) {
7509: pr_warn("md: md_import_device returned %ld\n",
7510: PTR_ERR(rdev));
7511: return PTR_ERR(rdev);
7512: }
7513: if (!list_empty(&mddev->disks)) {
7514: struct md_rdev *rdev0
7515: = list_entry(mddev->disks.next,
7516: struct md_rdev, same_set);
7517: err = super_types[mddev->major_version]
7518: .load_super(rdev, rdev0, mddev->minor_version);
7519: if (err < 0) {
7520: pr_warn("md: %pg has different UUID to %pg\n",
7521: rdev->bdev,
7522: rdev0->bdev);
7523: export_rdev(rdev);
7524: return -EINVAL;
7525: }
7526: }
7527: err = bind_rdev_to_array(rdev, mddev);
7528: if (err)
7529: export_rdev(rdev);
7530: return err;
7531: }
7532:
7533: /*
7534: * md_add_new_disk can be used once the array is assembled
7535: * to add "hot spares". They must already have a superblock
7536: * written
7537: */
7538: if (mddev->pers) {
7539: int err;
7540: if (!mddev->pers->hot_add_disk) {
7541: pr_warn("%s: personality does not support diskops!\n",
7542: mdname(mddev));
7543: return -EINVAL;
7544: }
7545: if (mddev->persistent)
7546: rdev = md_import_device(dev, mddev->major_version,
7547: mddev->minor_version);
7548: else
7549: rdev = md_import_device(dev, -1, -1);
]
|
| 22/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 15909
output: 37
thoughts: 12
Thoughts: Okay, here's my attempt at summarizing that thought process, keeping in mind I'm speaking to a fellow expert:
**Locating the `update_raid_disks` Function**
Alright, so I need to get to that `update_raid_disks` function. It's probably buried somewhere deep in the storage management code, likely related to any disk management tools I have built, or that are maintained by another party. I need to figure out the most efficient way to pinpoint it. My first inclination is to check the usual suspects. I will start by looking into the storage module. This makes sense to me, it's where my mind would wander as well. I hope this does not lead me down a rabbit hole. If it doesn't immediately jump out, I'll need to think about potential modules it might be nested within, maybe related to RAID configuration, disk I/O, or even error handling if it's part of a recovery process. Then I'll have to consider if it has been renamed, or aliased in any way, which can throw me off the scent. I will keep searching until I find it.
|
| 23/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:update_raid_disks]
Results: map[SourceCode:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
SourceFile:drivers/md/md.c]
|
| 24/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 16886
output: 38
thoughts: 130
Thoughts: **Analyzing the Raid Disk Update Process**
Okay, so `update_raid_disks` is setting this `mddev->delta_disks` value. That makes sense; it's probably tracking the *change* in the number of disks, as the name suggests. And after setting `delta_disks`, it calls `mddev->pers->check_reshape(mddev)`. Alright, standard procedure.
Now, this is where it gets interesting. If `check_reshape` returns 0, meaning everything is good with the reshape, then `mddev->delta_disks` is *still* non-zero. That feels...odd. So the delta value isn't cleared by default? It's left to persist after a successful check?
Hold on a second... Going back, I don't see `update_raid_disks` itself actually *changing* `mddev->raid_disks`. It only modifies the `delta_disks` variable. That means that *`check_reshape`* is the function responsible for setting the actual `mddev->raid_disks` value. I need to confirm this. I need to dig into `raid5_check_reshape` to see what is happening.
|
| 25/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:raid5_check_reshape]
Results: map[SourceCode:8974: static int raid5_check_reshape(struct mddev *mddev)
8975: {
8976: /* For a 2-drive array, the layout and chunk size can be changed
8977: * immediately as not restriping is needed.
8978: * For larger arrays we record the new value - after validation
8979: * to be used by a reshape pass.
8980: */
8981: struct r5conf *conf = mddev->private;
8982: int new_chunk = mddev->new_chunk_sectors;
8983:
8984: if (mddev->new_layout >= 0 && !algorithm_valid_raid5(mddev->new_layout))
8985: return -EINVAL;
8986: if (new_chunk > 0) {
8987: if (!is_power_of_2(new_chunk))
8988: return -EINVAL;
8989: if (new_chunk < (PAGE_SIZE>>9))
8990: return -EINVAL;
8991: if (mddev->array_sectors & (new_chunk-1))
8992: /* not factor of array size */
8993: return -EINVAL;
8994: }
8995:
8996: /* They look valid */
8997:
8998: if (mddev->raid_disks == 2) {
8999: /* can make the change immediately */
9000: if (mddev->new_layout >= 0) {
9001: conf->algorithm = mddev->new_layout;
9002: mddev->layout = mddev->new_layout;
9003: }
9004: if (new_chunk > 0) {
9005: conf->chunk_sectors = new_chunk ;
9006: mddev->chunk_sectors = new_chunk;
9007: }
9008: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
9009: md_wakeup_thread(mddev->thread);
9010: }
9011: return check_reshape(mddev);
9012: }
SourceFile:drivers/md/raid5.c]
|
| 26/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 17960
output: 35
thoughts: 16
Thoughts: Here's my take on the thought process, as if I were the one thinking it:
**Diving into `raid5.c` to Investigate `check_reshape`**
Okay, time to get my hands dirty. I need to dig into `raid5.c`. My primary focus right now is that function, `check_reshape`. I'm guessing it's at the heart of how the reshaping logic is being validated and potentially where the bugs or inefficiencies might be lurking. Let's see how it's implemented and where it sits within the overall structure. I want to understand how it interacts with the rest of the RAID 5 code, what parameters it uses, and what its overall goals are. I'm hoping I can quickly assess its complexity and identify any potential areas for improvement or, at least, potential debugging points if things are going sideways.
|
| 27/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:check_reshape]
Results: map[SourceCode:8586: static int check_reshape(struct mddev *mddev)
8587: {
8588: struct r5conf *conf = mddev->private;
8589:
8590: if (raid5_has_log(conf) || raid5_has_ppl(conf))
8591: return -EINVAL;
8592: if (mddev->delta_disks == 0 &&
8593: mddev->new_layout == mddev->layout &&
8594: mddev->new_chunk_sectors == mddev->chunk_sectors)
8595: return 0; /* nothing to do */
8596: if (has_failed(conf))
8597: return -EINVAL;
8598: if (!mddev->new_chunk_sectors)
8599: return -EINVAL;
8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
8601: /* We might be able to shrink, but the devices must
8602: * be made bigger first.
8603: * For raid6, 4 is the minimum size.
8604: * Otherwise 2 is the minimum
8605: */
8606: int min = 2;
8607: if (mddev->level == 6)
8608: min = 4;
8609: if (mddev->raid_disks + mddev->delta_disks < min)
8610: return -EINVAL;
8611: }
8612:
8613: if (!check_stripe_cache(mddev))
8614: return -ENOSPC;
8615:
8616: if (mddev->bitmap_id == ID_LLBITMAP &&
8617: mddev->new_chunk_sectors < mddev->chunk_sectors)
8618: return -EOPNOTSUPP;
8619: if (mddev->new_chunk_sectors > mddev->chunk_sectors ||
8620: mddev->delta_disks > 0)
8621: if (resize_chunks(conf,
8622: conf->previous_raid_disks
8623: + max(0, mddev->delta_disks),
8624: max(mddev->new_chunk_sectors,
8625: mddev->chunk_sectors)
8626: ) < 0)
8627: return -ENOMEM;
8628:
8629: if (conf->previous_raid_disks + mddev->delta_disks <= conf->pool_size)
8630: return 0; /* never bother to shrink */
8631: return resize_stripes(conf, (conf->previous_raid_disks
8632: + mddev->delta_disks));
8633: }
SourceFile:drivers/md/raid5.c]
|
| 28/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 19015
output: 36
thoughts: 111
Thoughts: **Analyzing RAID Disk Update Logic**
Okay, so I'm tracing through this disk update sequence. It looks like `update_raid_disks` is correctly setting `mddev->delta_disks` to 1. That's the expected initial change. Then, `check_reshape` is returning 0, which also seems normal, indicating the reshape isn't causing any immediate issues. `update_raid_disks` then returns 0, so far so good. Finally, `raid_disks_store` returns `len`. But hang on a second...something isn't adding up. I need to be more precise in my thoughts. This isn't expected.
Right, `raid_disks_store` *shouldn't* actually modify `mddev->raid_disks` if `mddev->pers` is set. That's the key. This implies it's in a persistent state, and we should be very careful when changing the disks, and indeed, `raid_disks_store` would not update `mddev->raid_disks`. I'm starting to remember that that has implications for the overall RAID design. I'm going to have to look at `raid_disks_store` again, carefully, to understand the exact conditions under which it *does* or *doesn't* update the disk count. Something isn't as it should be.
|
| 29/2 |
2026/09/09 20:31 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4431 LineCount:20]
Results: map[Contents:4431: if (mddev->pers) {
4432: if (n != mddev->raid_disks)
4433: err = update_raid_disks(mddev, n);
4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
4439: rdev_for_each(rdev, mddev) {
4440: if (olddisks < n &&
4441: rdev->data_offset < rdev->new_data_offset)
4442: goto out_unlock;
4443: if (olddisks > n &&
4444: rdev->data_offset > rdev->new_data_offset)
4445: goto out_unlock;
4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
]
|
| 30/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 19826
output: 36
thoughts: 38
Thoughts: Okay, let's see. My first thought is: **Hang on a minute, I was under the impression that `update_raid_disks` *should* modify `mddev->raid_disks`. That's not the behavior I was expecting.** This means I need to double-check my understanding of how this function is intended to behave. Let's get back into the code and go through `update_raid_disks` again. Maybe I missed something, or perhaps there's an internal function call I haven't accounted for. I need to be sure I haven't got a misunderstanding somewhere that will lead to a bug.
|
| 31/2 |
2026/09/09 20:31 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:8034 LineCount:40]
Results: map[Contents:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
8073:
]
|
| 32/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 20715
output: 36
thoughts: 89
Thoughts: Okay, here's my interpretation of this logic, phrased as a personal thought process:
**Understanding the `update_raid_disks` Function and Array State Transitions**
Right, so `update_raid_disks` is setting `mddev->delta_disks`. Crucially, it's *not* touching `mddev->raid_disks`. That's the key distinction here. It's a kind of intermediate state, I see. It's indicating what *will* change, not what *is* changed.
But wait, if `update_raid_disks` is successful, `mddev->delta_disks` will be non-zero. That makes sense, because it means a change *is* planned. So it's indicating that some disks are either going to be added or removed.
Then, the user takes the array down, and the `array_state` transitions to "inactive". That trigger calls `do_md_stop`.
|
| 33/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 34/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 22211
output: 36
thoughts: 38
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in the weeds of RAID management, and thinking through some error handling:
**Analyzing the RAID Array State Transition**
Alright, so the `array_state` is reported as "inactive". That automatically triggers a call to `do_md_stop` with `mddev` and a parameter of `2`. I need to figure out *why* that's happening. The specific error code passed to `do_md_stop` implies a certain kind of shutdown - which I need to understand in context of the array's inactivity. This isn't just a regular stop operation.
Let's drill down. I need to understand what's setting that `array_state` in the first place. My immediate next step is to examine the `array_state_store` function. That's where the value is set, and where I can follow the control flow to identify the root cause of this transition to an "inactive" state. Is it a user command, a hardware failure, a software-level error, or something else entirely that's setting this state? Knowing the possible code paths will give me context, and help determine the significance of this `do_md_stop` call.
|
| 35/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:array_state_store]
Results: map[SourceCode:4655: static ssize_t
4656: array_state_store(struct mddev *mddev, const char *buf, size_t len)
4657: {
4658: int err = 0;
4659: enum array_state st = match_word(buf, array_states);
4660:
4661: /* No lock dependent actions */
4662: switch (st) {
4663: case suspended: /* not supported yet */
4664: case write_pending: /* cannot be set */
4665: case active_idle: /* cannot be set */
4666: case broken: /* cannot be set */
4667: case bad_word:
4668: return -EINVAL;
4669: case clear:
4670: case readonly:
4671: case inactive:
4672: case read_auto:
4673: if (!mddev->pers || !md_is_rdwr(mddev))
4674: break;
4675: /* write sysfs will not open mddev and opener should be 0 */
4676: err = mddev_set_closing_and_sync_blockdev(mddev, 0);
4677: if (err)
4678: return err;
4679: break;
4680: default:
4681: break;
4682: }
4683:
4684: if (mddev->pers && (st == active || st == clean) &&
4685: mddev->ro != MD_RDONLY) {
4686: /* don't take reconfig_mutex when toggling between
4687: * clean and active
4688: */
4689: spin_lock(&mddev->lock);
4690: if (st == active) {
4691: restart_array(mddev);
4692: clear_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags);
4693: md_wakeup_thread(mddev->thread);
4694: wake_up(&mddev->sb_wait);
4695: } else /* st == clean */ {
4696: restart_array(mddev);
4697: if (!set_in_sync(mddev))
4698: err = -EBUSY;
4699: }
4700: if (!err)
4701: sysfs_notify_dirent_safe(mddev->sysfs_state);
4702: spin_unlock(&mddev->lock);
4703: return err ?: len;
4704: }
4705: err = mddev_lock(mddev);
4706: if (err)
4707: return err;
4708:
4709: switch (st) {
4710: case inactive:
4711: /* stop an active array, return 0 otherwise */
4712: if (mddev->pers)
4713: err = do_md_stop(mddev, 2);
4714: break;
4715: case clear:
4716: err = do_md_stop(mddev, 0);
4717: break;
4718: case readonly:
4719: if (mddev->pers)
4720: err = md_set_readonly(mddev);
4721: else {
4722: mddev->ro = MD_RDONLY;
4723: set_disk_ro(mddev->gendisk, 1);
4724: err = do_md_run(mddev);
4725: }
4726: break;
4727: case read_auto:
4728: if (mddev->pers) {
4729: if (md_is_rdwr(mddev))
4730: err = md_set_readonly(mddev);
4731: else if (mddev->ro == MD_RDONLY)
4732: err = restart_array(mddev);
4733: if (err == 0) {
4734: mddev->ro = MD_AUTO_READ;
4735: set_disk_ro(mddev->gendisk, 0);
4736: }
4737: } else {
4738: mddev->ro = MD_AUTO_READ;
4739: err = do_md_run(mddev);
4740: }
4741: break;
4742: case clean:
4743: if (mddev->pers) {
4744: err = restart_array(mddev);
4745: if (err)
4746: break;
4747: spin_lock(&mddev->lock);
4748: if (!set_in_sync(mddev))
4749: err = -EBUSY;
4750: spin_unlock(&mddev->lock);
4751: } else
4752: err = -EINVAL;
4753: break;
4754: case active:
4755: if (mddev->pers) {
4756: err = restart_array(mddev);
4757: if (err)
4758: break;
4759: clear_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags);
4760: wake_up(&mddev->sb_wait);
4761: err = 0;
4762: } else {
4763: mddev->ro = MD_RDWR;
4764: set_disk_ro(mddev->gendisk, 0);
4765: err = do_md_run(mddev);
4766: }
4767: break;
4768: default:
4769: err = -EINVAL;
4770: break;
4771: }
4772:
4773: if (!err) {
4774: if (mddev->hold_active == UNTIL_IOCTL)
4775: mddev->hold_active = 0;
4776: sysfs_notify_dirent_safe(mddev->sysfs_state);
4777: }
4778: mddev_unlock(mddev);
4779:
4780: if (st == readonly || st == read_auto || st == inactive ||
4781: (err && st == clear))
4782: clear_bit(MD_CLOSING, &mddev->flags);
4783:
4784: return err ?: len;
4785: }
SourceFile:drivers/md/md.c]
|
| 36/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 24431
output: 35
thoughts: 53
Thoughts: Okay, here's my interpretation of that logic, as if it's running through my own mental processes:
**Inactive Array State: The Stop Sequence**
Right, so the system is telling me that when the `array_state` variable transitions to "inactive," the function `do_md_stop(mddev, 2)` gets invoked. That's my starting point. I know what that means. We're looking at a shutdown procedure, specifically for a RAID array, designated by `mddev`.
Now, digging a little deeper, `do_md_stop(mddev, 2)` isn't the final function in this sequence. This is important to understand when diagnosing any issues. It's actually a wrapper. This function, in turn, calls `__md_stop(mddev)`. That's the actual core of the shutdown. `__md_stop` is going to be where the real work happens in terms of dismounting filesystems, syncing data, and eventually setting the devices to inactive. I need to keep that in mind when I start debugging any shutdown related issues.
|
| 37/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 38/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 25009
output: 34
thoughts: 129
Thoughts: **My Analysis of the Array State Transition**
Okay, so I'm tracking this state change, and it seems the persistent metadata pointer, `mddev->pers`, is being set to NULL. This is a crucial shift. Following that, the `array_state` variable is set to "active". Now, because that `mddev->pers` pointer is NULL, the logic flow diverges. Normally, it would go one way, but the absence of a persistent metadata structure changes things.
Specifically, since `mddev->pers` is NULL and we're in the "active" state, the code hits that conditional block where `mddev->ro` is set to `MD_RDWR` which tells me the array should be read-write. Then `set_disk_ro` is called to unset the read-only flag, and finally, `do_md_run(mddev)` is invoked. This signals the start of the array or some form of array re-activation. Further investigation would have to be done to understand why the array state changed and the implications of this change. From `do_md_run` I can infer `md_run` is called next.
|
| 39/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_run]
Results: map[SourceCode:6650: int md_run(struct mddev *mddev)
6651: {
6652: int err;
6653: struct md_rdev *rdev;
6654: struct md_personality *pers;
6655:
6656: if (list_empty(&mddev->disks))
6657: /* cannot run an array with no devices.. */
6658: return -EINVAL;
6659:
6660: if (mddev->pers)
6661: return -EBUSY;
6662: /* Cannot run until previous stop completes properly */
6663: if (mddev->sysfs_active)
6664: return -EBUSY;
6665:
6666: /*
6667: * Analyze all RAID superblock(s)
6668: */
6669: if (!mddev->raid_disks) {
6670: if (!mddev->persistent)
6671: return -EINVAL;
6672: err = analyze_sbs(mddev);
6673: if (err)
6674: return -EINVAL;
6675: }
6676:
6677: if (mddev->level != LEVEL_NONE)
6678: request_module("md-level-%d", mddev->level);
6679: else if (mddev->clevel[0])
6680: request_module("md-%s", mddev->clevel);
6681:
6682: /*
6683: * Drop all container device buffers, from now on
6684: * the only valid external interface is through the md
6685: * device.
6686: */
6687: clear_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6688: rdev_for_each(rdev, mddev) {
6689: if (test_bit(Faulty, &rdev->flags))
6690: continue;
6691: sync_blockdev(rdev->bdev);
6692: invalidate_bdev(rdev->bdev);
6693: if (mddev->ro != MD_RDONLY && rdev_read_only(rdev)) {
6694: mddev->ro = MD_RDONLY;
6695: if (!mddev_is_dm(mddev))
6696: set_disk_ro(mddev->gendisk, 1);
6697: }
6698:
6699: if (rdev->sb_page)
6700: set_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6701:
6702: /* perform some consistency tests on the device.
6703: * We don't want the data to overlap the metadata,
6704: * Internal Bitmap issues have been handled elsewhere.
6705: */
6706: if (rdev->meta_bdev) {
6707: /* Nothing to check */;
6708: } else if (rdev->data_offset < rdev->sb_start) {
6709: if (mddev->dev_sectors &&
6710: rdev->data_offset + mddev->dev_sectors
6711: > rdev->sb_start) {
6712: pr_warn("md: %s: data overlaps metadata\n",
6713: mdname(mddev));
6714: return -EINVAL;
6715: }
6716: } else {
6717: if (rdev->sb_start + rdev->sb_size/512
6718: > rdev->data_offset) {
6719: pr_warn("md: %s: metadata overlaps data\n",
6720: mdname(mddev));
6721: return -EINVAL;
6722: }
6723: }
6724: sysfs_notify_dirent_safe(rdev->sysfs_state);
6725: }
6726:
6727: pers = get_pers(mddev->level, mddev->clevel);
6728: if (!pers)
6729: return -EINVAL;
6730: if (mddev->level != pers->head.id) {
6731: mddev->level = pers->head.id;
6732: mddev->new_level = pers->head.id;
6733: }
6734: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
6735:
6736: if (mddev->reshape_position != MaxSector &&
6737: pers->start_reshape == NULL) {
6738: /* This personality cannot handle reshaping... */
6739: put_pers(pers);
6740: return -EINVAL;
6741: }
6742:
6743: if (pers->sync_request) {
6744: /* Warn if this is a potentially silly
6745: * configuration.
6746: */
6747: struct md_rdev *rdev2;
6748: int warned = 0;
6749:
6750: rdev_for_each(rdev, mddev)
6751: rdev_for_each(rdev2, mddev) {
6752: if (rdev < rdev2 &&
6753: rdev->bdev->bd_disk ==
6754: rdev2->bdev->bd_disk) {
6755: pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",
6756: mdname(mddev),
6757: rdev->bdev,
6758: rdev2->bdev);
6759: warned = 1;
6760: }
6761: }
6762:
6763: if (warned)
6764: pr_warn("True protection against single-disk failure might be compromised.\n");
6765: }
6766:
6767: /* dm-raid expect sync_thread to be frozen until resume */
6768: if (!mddev_is_dm(mddev))
6769: mddev->recovery = 0;
6770:
6771: /* may be over-ridden by personality */
6772: mddev->resync_max_sectors = mddev->dev_sectors;
6773:
6774: mddev->ok_start_degraded = start_dirty_degraded;
6775:
6776: if (start_readonly && md_is_rdwr(mddev))
6777: mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
6778:
6779: err = pers->run(mddev);
6780: if (err)
6781: pr_warn("md: pers->run() failed ...\n");
6782: else if (pers->size(mddev, 0, 0) < mddev->array_sectors) {
6783: WARN_ONCE(!mddev->external_size,
6784: "%s: default size too small, but 'external_size' not in effect?\n",
6785: __func__);
6786: pr_warn("md: invalid array_size %llu > default size %llu\n",
6787: (unsigned long long)mddev->array_sectors / 2,
6788: (unsigned long long)pers->size(mddev, 0, 0) / 2);
6789: err = -EINVAL;
6790: }
6791: if (err == 0 && pers->sync_request &&
6792: (mddev->bitmap_info.file || mddev->bitmap_info.offset)) {
6793: err = md_bitmap_create(mddev);
6794: if (err)
6795: pr_warn("%s: failed to create bitmap (%d)\n",
6796: mdname(mddev), err);
6797: }
6798: if (err)
6799: goto bitmap_abort;
6800:
6801: if (mddev->bitmap_info.max_write_behind > 0) {
6802: bool create_pool = false;
6803:
6804: rdev_for_each(rdev, mddev) {
6805: if (test_bit(WriteMostly, &rdev->flags) &&
6806: rdev_init_serial(rdev))
6807: create_pool = true;
6808: }
6809: if (create_pool && mddev->serial_info_pool == NULL) {
6810: mddev->serial_info_pool =
6811: mempool_create_kmalloc_pool(NR_SERIAL_INFOS,
6812: sizeof(struct serial_info));
6813: if (!mddev->serial_info_pool) {
6814: err = -ENOMEM;
6815: goto bitmap_abort;
6816: }
6817: }
6818: }
6819:
6820: if (pers->sync_request) {
6821: if (mddev->kobj.sd &&
6822: sysfs_create_group(&mddev->kobj, &md_redundancy_group))
6823: pr_warn("md: cannot register extra attributes for %s\n",
6824: mdname(mddev));
6825: mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
6826: mddev->sysfs_completed = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_completed");
6827: mddev->sysfs_degraded = sysfs_get_dirent_safe(mddev->kobj.sd, "degraded");
6828: } else if (mddev->ro == MD_AUTO_READ)
6829: mddev->ro = MD_RDWR;
6830:
6831: atomic_set(&mddev->max_corr_read_errors,
6832: MD_DEFAULT_MAX_CORRECTED_READ_ERRORS);
6833: mddev->safemode = 0;
6834: if (mddev_is_clustered(mddev))
6835: mddev->safemode_delay = 0;
6836: else
6837: mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
6838: mddev->in_sync = 1;
6839: smp_wmb();
6840: spin_lock(&mddev->lock);
6841: mddev->pers = pers;
6842: spin_unlock(&mddev->lock);
6843: rdev_for_each(rdev, mddev)
6844: if (rdev->raid_disk >= 0)
6845: sysfs_link_rdev(mddev, rdev); /* failure here is OK */
6846:
6847: if (mddev->degraded && md_is_rdwr(mddev))
6848: /* This ensures that recovering status is reported immediately
6849: * via sysfs - until a lack of spares is confirmed.
6850: */
6851: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
6852: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
6853:
6854: if (mddev->sb_flags)
6855: md_update_sb(mddev, 0);
6856:
6857: if (IS_ENABLED(CONFIG_MD_BITMAP) && !mddev->bitmap_info.file &&
6858: !mddev->bitmap_info.offset)
6859: md_bitmap_set_none(mddev);
6860:
6861: md_new_event();
6862: return 0;
6863:
6864: bitmap_abort:
6865: mddev_detach(mddev);
6866: if (mddev->private)
6867: pers->free(mddev, mddev->private);
6868: mddev->private = NULL;
6869: put_pers(pers);
6870: md_bitmap_destroy(mddev);
6871: return err;
6872: }
SourceFile:drivers/md/md.c]
|
| 40/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 28971
output: 58
thoughts: 476
Thoughts: **Debugging a RAID5 Reshape Bug**
Okay, let's break this down. `md_run` calls `pers->run(mddev)`, which, in this RAID5 case, is `raid5_run`. Right now, the `mddev->reshape_position` is definitely `MaxSector` because it wasn't modified initially. I need to trace this... Ah, `update_raid_disks` sets `mddev->delta_disks` to 1, I see that. But crucially, it *doesn't* touch `mddev->reshape_position`. Interesting.
Now, when the `array_state` transitions to "inactive", `__md_stop` gets called. Does `__md_stop` reset that `mddev->delta_disks` value? No, it doesn't. That's a key observation. So, when the array becomes "active" again, `md_run` is called, and, yep, `mddev->delta_disks` is *still* 1.
Then we hit `raid5_run`. The crucial code block is:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
Since `mddev->reshape_position` is indeed `MaxSector` and `mddev->delta_disks` is 1, that last `BUG_ON` *will* trigger. That's it! I've found the issue!
Let's quickly verify that `mddev->reshape_position` is definitely `MaxSector`. Yep, it started that way. But when `update_raid_disks` is called, does it start the reshape? No, it only sets that `delta_disks` field. Then `check_reshape` is called. Then `update_raid_disks` returns 0. `raid_disks_store` returns `len`. So, the reshape isn't triggered directly from there. I remember, the reshape must start in a background thread. I need to dig into how that's initiated, that's where the problem is.
|
| 41/2 |
2026/09/09 20:31 |
tool |
codesearch-find-references |
0m
Error:
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:MD_RECOVERY_RESHAPE SourceTreePrefix:drivers/md/md.c]
Results: map[References:<nil> TruncatedOutput:false]
|
| 42/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 30067
output: 34
thoughts: 21
Thoughts: Here's my understanding, as if I were thinking it through:
**Deconstructing the Recovery Process in the RAID Driver**
Okay, so I'm digging into this RAID driver code, and I see this crucial constant, `MD_RECOVERY_RESHAPE`. That name immediately clicks - it's a flag, a bit specifically, residing within the `mddev->recovery` structure. Right, I remember that structure now, and I can start to piece this together. This bit being set suggests the recovery process is directly tied to a reshape operation. This confirms my initial thoughts that the driver's recovery mechanism has to know when the recovery is a rebuild versus a reshape. Knowing this, I can focus my analysis on how this bit is set, cleared, and used within the overall recovery workflow to determine how reshape operations are handled. I can begin by checking where this constant is defined, what other bits are associated with `mddev->recovery`, and then I can trace its lifecycle within the recovery routines.
|
| 43/2 |
2026/09/09 20:31 |
tool |
grepper |
0m
Args: map[Expression:MD_RECOVERY_RESHAPE PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=2794=void md_update_sb(struct mddev *mddev, int force_change)
--
drivers/md/md.c-2839- test_bit(MD_RECOVERY_RECOVER, &mddev->recovery) &&
drivers/md/md.c:2840: !test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
drivers/md/md.c-2841- !test_bit(Journal, &rdev->flags) &&
--
drivers/md/md.c=5089=enum sync_action md_sync_action(struct mddev *mddev)
--
drivers/md/md.c-5125-
drivers/md/md.c:5126: if (test_bit(MD_RECOVERY_RESHAPE, &recovery))
drivers/md/md.c-5127- return ACTION_RESHAPE;
--
drivers/md/md.c=5536=sync_completed_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-5547- if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
drivers/md/md.c:5548: test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
drivers/md/md.c-5549- max_sectors = mddev->resync_max_sectors;
--
drivers/md/md.c=8842=static int status_resync(struct seq_file *seq, struct mddev *mddev)
--
drivers/md/md.c-8850- if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
drivers/md/md.c:8851: test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
drivers/md/md.c-8852- max_sectors = mddev->resync_max_sectors;
--
drivers/md/md.c-8930- seq_printf(seq, " %s =%3u.%u%% (%llu/%llu)",
drivers/md/md.c:8931: (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)?
drivers/md/md.c-8932- "reshape" :
--
drivers/md/md.c=9395=struct bio *mddev_bio_split_at_reshape_offset(struct mddev *mddev,
--
drivers/md/md.c-9408-
drivers/md/md.c:9409: if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
drivers/md/md.c-9410- goto split;
--
drivers/md/md.c=9727=void md_do_sync(struct md_thread *thread)
--
drivers/md/md.c-9763- if (!(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
drivers/md/md.c:9764: test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ||
drivers/md/md.c-9765- test_bit(MD_RECOVERY_RECOVER, &mddev->recovery))
--
drivers/md/md.c-9892-
drivers/md/md.c:9893: if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
drivers/md/md.c-9894- ((mddev->curr_resync > mddev->curr_resync_completed &&
--
drivers/md/md.c-10024-
drivers/md/md.c:10025: if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
drivers/md/md.c-10026- mddev->curr_resync >= MD_RESYNC_ACTIVE) {
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10216-
drivers/md/md.c:10217: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
drivers/md/md.c-10218- clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10313-
drivers/md/md.c:10314: name = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ?
drivers/md/md.c-10315- "reshape" : "resync";
--
drivers/md/md.c-10342- clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
drivers/md/md.c:10343: clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
drivers/md/md.c-10344- clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
--
drivers/md/md.c=10570=void md_reap_sync_thread(struct mddev *mddev)
--
drivers/md/md.c-10573- sector_t old_dev_sectors = mddev->dev_sectors;
drivers/md/md.c:10574: bool is_reshaped = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
drivers/md/md.c-10575-
--
drivers/md/md.c-10606- clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
drivers/md/md.c:10607: clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
drivers/md/md.c-10608- clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
--
drivers/md/md.c-10612- * We call mddev->cluster_ops->update_size here because sync_size could
drivers/md/md.c:10613: * be changed by md_update_sb, and MD_RECOVERY_RESHAPE is cleared,
drivers/md/md.c-10614- * so it is time to update size across cluster.
]
|
| 44/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 32026
output: 38
thoughts: 13
Thoughts: Okay, here's my attempt at summarizing that thought process, tailored for an expert audience:
**Checking `md_choose_sync_action`**
Alright, time to dive in. My mind immediately goes to `md_choose_sync_action`. Itβs the linchpin, isn't it? The place where the magic β or potential mayhem β of the sync process actually gets decided. I'm running through the potential scenarios in my head: the various states, the conflict resolution strategies, the network conditions... what's the latest call stack look like? Did we address that edge case with the file renames?
I need to quickly assess its current state and if it is running as expected. Is it behaving as defined by the most recent spec? Any recent changes to this code? I will want to verify its assumptions about the metadata, the available local and remote data, and of course, the underlying platform capabilities. I'm thinking about the implications if it's not behaving correctly; the data integrity risks are significant. We can't afford a silent sync failure.
First, I need to verify its initial assumptions are correct, then run a quick check through the conditions of the code to find the potential problem.
|
| 45/2 |
2026/09/09 20:31 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_choose_sync_action]
Results: map[SourceCode:10209: static bool md_choose_sync_action(struct mddev *mddev, int *spares)
10210: {
10211: /* Check if reshape is in progress first. */
10212: if (mddev->reshape_position != MaxSector) {
10213: if (mddev->pers->check_reshape == NULL ||
10214: mddev->pers->check_reshape(mddev) != 0)
10215: return false;
10216:
10217: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
10218: clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
10219: clear_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery);
10220: return true;
10221: }
10222:
10223: /* Check if resync is in progress. */
10224: if (mddev->resync_offset < MaxSector) {
10225: remove_spares(mddev, NULL);
10226: set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
10227: clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
10228: clear_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery);
10229: return true;
10230: }
10231:
10232: /*
10233: * Remove any failed drives, then add spares if possible. Spares are
10234: * also removed and re-added, to allow the personality to fail the
10235: * re-add.
10236: */
10237: *spares = remove_and_add_spares(mddev, NULL);
10238: if (*spares || test_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery)) {
10239: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
10240: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
10241: clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
10242:
10243: /* Start new recovery. */
10244: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
10245: return true;
10246: }
10247:
10248: /* Delay to choose resync/check/repair in md_do_sync(). */
10249: if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
10250: return true;
10251:
10252: /* Nothing to be done */
10253: return false;
10254: }
SourceFile:drivers/md/md.c]
|
| 46/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 33178
output: 54
thoughts: 56
Thoughts: Okay, let me think this through.
**Investigating a RAID Reshape Discrepancy**
Hmm, so `md_choose_sync_action` is relying on `mddev->reshape_position` to determine its next steps. That makes sense, it needs a way to track the reshape process. But hang on... I'm pretty sure I remember looking at `update_raid_disks` and not seeing any modification of `mddev->reshape_position` in there. That function is responsible for, well, updating the RAID disks during the reshape, right? So if *it* isn't setting the reshape position, then what is? This discrepancy is going to cause problems. I need to track down exactly where and *how* `mddev->reshape_position` is initialized and updated. There's a potential race condition or a missed initialization somewhere if these two functions don't agree on that value. This demands immediate investigation, because incorrect values here will break the reshape. Let's start by figuring out where that variable gets set.
|
| 47/2 |
2026/09/09 20:31 |
tool |
codesearch-find-references |
0m
Error:
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:reshape_position SourceTreePrefix:drivers/md/md.c]
Results: map[References:<nil> TruncatedOutput:false]
|
| 48/2 |
2026/09/09 20:31 |
llm |
debugger |
0m
Model:
Tokens:
input: 33531
output: 30
thoughts: 10
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the Codebase for 'reshape_position'**
Okay, so I need to understand how the code handles position reshaping. My first instinct is to use `grep`. I want a quick, targeted way to identify all instances where the code deals with a function or variable named `reshape_position`. This is a pretty standard debugging approach; it's the fastest way to get a bird's-eye view of where that keyword is used. I'm hoping that by grepping, I'll quickly find the relevant modules, functions, or variable usages that define or reference this term. From there, I can understand the context and flow more effectively. I can then use that information to formulate a more complex query, or to jump into relevant files directly for a closer look.
|
| 49/2 |
2026/09/09 20:32 |
tool |
grepper |
0m
Args: map[Expression:reshape_position PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=740=int mddev_init(struct mddev *mddev)
--
drivers/md/md.c-788- init_waitqueue_head(&mddev->recovery_wait);
drivers/md/md.c:789: mddev->reshape_position = MaxSector;
drivers/md/md.c-790- mddev->reshape_backwards = 0;
--
drivers/md/md.c=1176=int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
--
drivers/md/md.c-1188- bio.bi_iter.bi_sector = sector + rdev->sb_start;
drivers/md/md.c:1189: else if (rdev->mddev->reshape_position != MaxSector &&
drivers/md/md.c-1190- (rdev->mddev->reshape_backwards ==
drivers/md/md.c:1191: (sector >= rdev->mddev->reshape_position)))
drivers/md/md.c-1192- bio.bi_iter.bi_sector = sector + rdev->new_data_offset;
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1511- if (mddev->minor_version >= 91) {
drivers/md/md.c:1512: mddev->reshape_position = sb->reshape_position;
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
--
drivers/md/md.c-1519- } else {
drivers/md/md.c:1520: mddev->reshape_position = MaxSector;
drivers/md/md.c-1521- mddev->delta_disks = 0;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1648-
drivers/md/md.c:1649: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-1650- sb->minor_version = 90;
--
drivers/md/md.c-1652- sb->minor_version = 91;
drivers/md/md.c:1653: sb->reshape_position = mddev->reshape_position;
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
--
drivers/md/md.c-1684- /* we have nowhere to store the recovery_offset,
drivers/md/md.c:1685: * but if it is not below the reshape_position,
drivers/md/md.c-1686- * we can piggy-back on that.
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2054- if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c:2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
--
drivers/md/md.c-2065- } else {
drivers/md/md.c:2066: mddev->reshape_position = MaxSector;
drivers/md/md.c-2067- mddev->delta_disks = 0;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2263-
drivers/md/md.c:2264: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-2265- sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
drivers/md/md.c:2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/md.c=2753=static bool does_sb_need_changing(struct mddev *mddev)
--
drivers/md/md.c-2784- if ((mddev->dev_sectors != le64_to_cpu(sb->size)) ||
drivers/md/md.c:2785: (mddev->reshape_position != le64_to_cpu(sb->reshape_position)) ||
drivers/md/md.c-2786- (mddev->layout != le32_to_cpu(sb->layout)) ||
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4086- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
drivers/md/md.c:4087: mddev->reshape_position != MaxSector ||
drivers/md/md.c-4088- mddev->sysfs_active)
--
drivers/md/md.c=4357=layout_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4359- /* just a number, not meaningful for all levels */
drivers/md/md.c:4360: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4361- mddev->layout != mddev->new_layout)
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4392- mddev->new_layout = n;
drivers/md/md.c:4393: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4394- mddev->layout = n;
--
drivers/md/md.c=4403=raid_disks_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4406- return 0;
drivers/md/md.c:4407: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4408- mddev->delta_disks != 0)
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4433- err = update_raid_disks(mddev, n);
drivers/md/md.c:4434: } else if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-4435- struct md_rdev *rdev;
--
drivers/md/md.c=4470=chunk_size_show(struct mddev *mddev, char *page)
drivers/md/md.c-4471-{
drivers/md/md.c:4472: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4473- mddev->chunk_sectors != mddev->new_chunk_sectors)
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4505- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4506: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4507- mddev->chunk_sectors = n >> 9;
--
drivers/md/md.c=5066=static enum sync_action md_get_active_sync_action(struct mddev *mddev)
--
drivers/md/md.c-5073-
drivers/md/md.c:5074: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5075- return ACTION_RESHAPE;
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5248-
drivers/md/md.c:5249: if (mddev->reshape_position == MaxSector ||
drivers/md/md.c-5250- mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=5710=static ssize_t
drivers/md/md.c:5711:reshape_position_show(struct mddev *mddev, char *page)
drivers/md/md.c-5712-{
drivers/md/md.c:5713: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5714- return sprintf(page, "%llu\n",
drivers/md/md.c:5715: (unsigned long long)mddev->reshape_position);
drivers/md/md.c-5716- strcpy(page, "none\n");
--
drivers/md/md.c=5720=static ssize_t
drivers/md/md.c:5721:reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-5722-{
--
drivers/md/md.c-5737- goto unlock;
drivers/md/md.c:5738: mddev->reshape_position = new;
drivers/md/md.c-5739- mddev->delta_disks = 0;
--
drivers/md/md.c-5751-
drivers/md/md.c:5752:static struct md_sysfs_entry md_reshape_position =
drivers/md/md.c:5753:__ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show,
drivers/md/md.c:5754: reshape_position_store);
drivers/md/md.c-5755-
--
drivers/md/md.c=6063=static struct attribute *md_default_attrs[] = {
--
drivers/md/md.c-6076- &md_array_state.attr,
drivers/md/md.c:6077: &md_reshape_position.attr,
drivers/md/md.c-6078- &md_reshape_direction.attr,
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6735-
drivers/md/md.c:6736: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-6737- pers->start_reshape == NULL) {
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-6975- mddev->resync_max = MaxSector;
drivers/md/md.c:6976: mddev->reshape_position = MaxSector;
drivers/md/md.c-6977- /* we still need mddev->external in export_rdev, do not clear it yet */
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7964-
drivers/md/md.c:7965: mddev->reshape_position = MaxSector;
drivers/md/md.c-7966-
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8047- test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
drivers/md/md.c:8048: mddev->reshape_position != MaxSector)
drivers/md/md.c-8049- return -EBUSY;
--
drivers/md/md.c=8842=static int status_resync(struct seq_file *seq, struct mddev *mddev)
--
drivers/md/md.c-8887- }
drivers/md/md.c:8888: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-8889- seq_printf(seq, "\treshape=REMOTE");
--
drivers/md/md.c=9395=struct bio *mddev_bio_split_at_reshape_offset(struct mddev *mddev,
--
drivers/md/md.c-9411-
drivers/md/md.c:9412: boundary = READ_ONCE(mddev->reshape_position);
drivers/md/md.c-9413- start = bio->bi_iter.bi_sector;
--
drivers/md/md.c=9610=static sector_t md_sync_position(struct mddev *mddev, enum sync_action action)
--
drivers/md/md.c-9629- if (mddev_is_clustered(mddev) &&
drivers/md/md.c:9630: mddev->reshape_position != MaxSector)
drivers/md/md.c:9631: return mddev->reshape_position;
drivers/md/md.c-9632- return 0;
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10211- /* Check if reshape is in progress first. */
drivers/md/md.c:10212: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-10213- if (mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10267- */
drivers/md/md.c:10268: if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10269- md_spares_need_change(mddev)) {
--
drivers/md/md.c-10280- */
drivers/md/md.c:10281: if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10282- md_spares_need_change(mddev)) {
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10886- * reshape is happening in the remote node, we need to
drivers/md/md.c:10887: * update reshape_position and call start_reshape.
drivers/md/md.c-10888- */
drivers/md/md.c:10889: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-10890- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.c-10894- } else if (test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) &&
drivers/md/md.c:10895: mddev->reshape_position != MaxSector &&
drivers/md/md.c-10896- !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c-10897- /* reshape is just done in another node. */
drivers/md/md.c:10898: mddev->reshape_position = MaxSector;
drivers/md/md.c-10899- if (mddev->pers->update_reshape_pos)
]
|
| 50/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 38185
output: 38
thoughts: 97
Thoughts: **My Reshape Inquiry**
Okay, hold on a second. I'm reviewing the reshape process, and something's bugging me. I see that `mddev->reshape_position` is initially set to `MaxSector`. That's the starting point, the "ready to go" state. Now, I know that when the number of `raid_disks` changes, the `update_raid_disks` function gets called. Makes sense. And yes, I see that `mddev->delta_disks` *is* updated within `update_raid_disks`. That's expected behaviour.
But here's the kicker: `update_raid_disks` doesn't seem to touch `mddev->reshape_position`. I'm trying to figure out how the reshape actually gets initiated, how that `reshape_position` gets moved away from its default value to actually *start* the reshape operation. It has to be set, otherwise nothing will happen. So, if `update_raid_disks` isn't doing it, where is it being set?
My next logical step is to check the `raid5_check_reshape` function. That seems like the likely candidate. I'm going to dig into *that* code to see if it's the one that's actually kicking off the reshape. I'm almost certain `raid5_check_reshape` is where the answer lies. Let's see...
|
| 51/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:raid5_check_reshape]
Results: map[SourceCode:8974: static int raid5_check_reshape(struct mddev *mddev)
8975: {
8976: /* For a 2-drive array, the layout and chunk size can be changed
8977: * immediately as not restriping is needed.
8978: * For larger arrays we record the new value - after validation
8979: * to be used by a reshape pass.
8980: */
8981: struct r5conf *conf = mddev->private;
8982: int new_chunk = mddev->new_chunk_sectors;
8983:
8984: if (mddev->new_layout >= 0 && !algorithm_valid_raid5(mddev->new_layout))
8985: return -EINVAL;
8986: if (new_chunk > 0) {
8987: if (!is_power_of_2(new_chunk))
8988: return -EINVAL;
8989: if (new_chunk < (PAGE_SIZE>>9))
8990: return -EINVAL;
8991: if (mddev->array_sectors & (new_chunk-1))
8992: /* not factor of array size */
8993: return -EINVAL;
8994: }
8995:
8996: /* They look valid */
8997:
8998: if (mddev->raid_disks == 2) {
8999: /* can make the change immediately */
9000: if (mddev->new_layout >= 0) {
9001: conf->algorithm = mddev->new_layout;
9002: mddev->layout = mddev->new_layout;
9003: }
9004: if (new_chunk > 0) {
9005: conf->chunk_sectors = new_chunk ;
9006: mddev->chunk_sectors = new_chunk;
9007: }
9008: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
9009: md_wakeup_thread(mddev->thread);
9010: }
9011: return check_reshape(mddev);
9012: }
SourceFile:drivers/md/raid5.c]
|
| 52/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 39272
output: 37
thoughts: 58
Thoughts: Here's my summary, as if I were thinking it:
**Digging into Reshape Logic**
Okay, so I'm looking at how this reshape process is supposed to work and I've got a question. `check_reshape` doesn't seem to touch `mddev->reshape_position`. That's... odd. So, if `check_reshape` doesn't set it, that means `mddev->reshape_position` will be left at `MaxSector`. Hmm, that's definitely not what we want. It has to be set somewhere, right? The point of a reshape is to *reshape* the array, meaning we need to mark where we *should* start.
Let me think... when *is* `reshape_position` actually initialized? I need to track down where this crucial value is actually set. It must be earlier... Let's see if `mddev_start_reshape` helps shed some light on the subject. That seems like the logical place to start looking.
|
| 53/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:mddev_start_reshape]
Results: map[SourceCode:5242: static int mddev_start_reshape(struct mddev *mddev)
5243: {
5244: int ret;
5245:
5246: if (mddev->pers->start_reshape == NULL)
5247: return -EINVAL;
5248:
5249: if (mddev->reshape_position == MaxSector ||
5250: mddev->pers->check_reshape == NULL ||
5251: mddev->pers->check_reshape(mddev)) {
5252: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5253: ret = mddev->pers->start_reshape(mddev);
5254: if (ret)
5255: return ret;
5256: } else {
5257: /*
5258: * If reshape is still in progress, and md_check_recovery() can
5259: * continue to reshape, don't restart reshape because data can
5260: * be corrupted for raid456.
5261: */
5262: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5263: }
5264:
5265: sysfs_notify_dirent_safe(mddev->sysfs_degraded);
5266: return 0;
5267: }
SourceFile:drivers/md/md.c]
|
| 54/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 39998
output: 38
thoughts: 38
Thoughts: Here's my analysis of the code snippet, distilled into a first-person perspective:
**Diving into the Reshape Logic**
Okay, so `mddev_start_reshape` is where things kick off for a reshape operation. Interesting. The key is that this function calls `mddev->pers->start_reshape(mddev)`. This `pers` pointer, that's the personality of the array. So, that call is effectively delegating the reshape start process to the specific RAID level in use. Now, to understand *how* that reshaping starts, I need to look into how the reshape functions within each RAID type work. I need to check `raid5_start_reshape`, to see how RAID5 specifically tackles this problem.
|
| 55/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:raid5_start_reshape]
Results: map[SourceCode:8635: static int raid5_start_reshape(struct mddev *mddev)
8636: {
8637: struct r5conf *conf = mddev->private;
8638: struct md_rdev *rdev;
8639: int spares = 0;
8640: int i;
8641: unsigned long flags;
8642:
8643: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
8644: return -EBUSY;
8645:
8646: if (!mddev->new_chunk_sectors)
8647: return -EINVAL;
8648:
8649: if (!check_stripe_cache(mddev))
8650: return -ENOSPC;
8651:
8652: if (has_failed(conf))
8653: return -EINVAL;
8654:
8655: /* raid5 can't handle concurrent reshape and recovery */
8656: if (mddev->resync_offset < MaxSector)
8657: return -EBUSY;
8658: for (i = 0; i < conf->raid_disks; i++)
8659: if (conf->disks[i].replacement)
8660: return -EBUSY;
8661:
8662: rdev_for_each(rdev, mddev) {
8663: if (!test_bit(In_sync, &rdev->flags)
8664: && !test_bit(Faulty, &rdev->flags))
8665: spares++;
8666: }
8667:
8668: if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
8669: /* Not enough devices even to make a degraded array
8670: * of that size
8671: */
8672: return -EINVAL;
8673:
8674: /* Refuse to reduce size of the array. Any reductions in
8675: * array size must be through explicit setting of array_size
8676: * attribute.
8677: */
8678: if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
8679: < mddev->array_sectors) {
8680: pr_warn("md/raid:%s: array size must be reduced before number of disks\n",
8681: mdname(mddev));
8682: return -EINVAL;
8683: }
8684: if (md_bitmap_enabled(mddev, false) &&
8685: mddev->bitmap_id == ID_LLBITMAP) {
8686: i = mddev->bitmap_ops->resize(mddev, mddev->dev_sectors, 0);
8687: if (i)
8688: return i;
8689: }
8690:
8691: atomic_set(&conf->reshape_stripes, 0);
8692: spin_lock_irq(&conf->device_lock);
8693: write_seqcount_begin(&conf->gen_lock);
8694: conf->previous_raid_disks = conf->raid_disks;
8695: conf->raid_disks += mddev->delta_disks;
8696: conf->prev_chunk_sectors = conf->chunk_sectors;
8697: conf->chunk_sectors = mddev->new_chunk_sectors;
8698: conf->prev_algo = conf->algorithm;
8699: conf->algorithm = mddev->new_layout;
8700: conf->generation++;
8701: /* Code that selects data_offset needs to see the generation update
8702: * if reshape_progress has been set - so a memory barrier needed.
8703: */
8704: smp_mb();
8705: if (mddev->reshape_backwards)
8706: conf->reshape_progress = raid5_size(mddev, 0, 0);
8707: else
8708: conf->reshape_progress = 0;
8709: conf->reshape_safe = conf->reshape_progress;
8710: write_seqcount_end(&conf->gen_lock);
8711: spin_unlock_irq(&conf->device_lock);
8712:
8713: /* Now make sure any requests that proceeded on the assumption
8714: * the reshape wasn't running - like Discard or Read - have
8715: * completed.
8716: */
8717: raid5_quiesce(mddev, true);
8718: raid5_quiesce(mddev, false);
8719:
8720: /* Add some new drives, as many as will fit.
8721: * We know there are enough to make the newly sized array work.
8722: * Don't add devices if we are reducing the number of
8723: * devices in the array. This is because it is not possible
8724: * to correctly record the "partially reconstructed" state of
8725: * such devices during the reshape and confusion could result.
8726: */
8727: if (mddev->delta_disks >= 0) {
8728: rdev_for_each(rdev, mddev)
8729: if (rdev->raid_disk < 0 &&
8730: !test_bit(Faulty, &rdev->flags)) {
8731: if (raid5_add_disk(mddev, rdev) == 0) {
8732: if (rdev->raid_disk
8733: >= conf->previous_raid_disks)
8734: set_bit(In_sync, &rdev->flags);
8735: else
8736: WRITE_ONCE(rdev->recovery_offset, 0);
8737:
8738: /* Failure here is OK */
8739: sysfs_link_rdev(mddev, rdev);
8740: }
8741: } else if (rdev->raid_disk >= conf->previous_raid_disks
8742: && !test_bit(Faulty, &rdev->flags)) {
8743: /* This is a spare that was manually added */
8744: set_bit(In_sync, &rdev->flags);
8745: }
8746:
8747: /* When a reshape changes the number of devices,
8748: * ->degraded is measured against the larger of the
8749: * pre and post number of devices.
8750: */
8751: spin_lock_irqsave(&conf->device_lock, flags);
8752: mddev->degraded = raid5_calc_degraded(conf);
8753: spin_unlock_irqrestore(&conf->device_lock, flags);
8754: }
8755: mddev->raid_disks = conf->raid_disks;
8756: mddev->reshape_position = conf->reshape_progress;
8757: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
8758:
8759: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
8760: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
8761: clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
8762: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
8763: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
8764: conf->reshape_checkpoint = jiffies;
8765: md_new_event();
8766: return 0;
8767: }
SourceFile:drivers/md/raid5.c]
|
| 56/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 42449
output: 57
thoughts: 59
Thoughts: Here's my summary, as though I'm thinking through this process:
**Reshape Position Deep Dive**
Okay, so I'm tracing the reshape process in this RAID setup. The first thing that jumps out is `raid5_start_reshape`. It's assigning `mddev->reshape_position` to `conf->reshape_progress`. That makes sense - we're initializing the reshape's starting point with the configured progress. But *how* is `raid5_start_reshape` triggered in the first place? I see that `raid5_start_reshape` is called from `mddev_start_reshape`. Now, I need to figure out the calling hierarchy. Where is `mddev_start_reshape` invoked? That's the crucial link I need to understand the control flow. Gotta go look upstream and see which functions call *that* function. I'll bet it is an interesting journey.
|
| 57/2 |
2026/09/09 20:32 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:mddev_start_reshape SourceTreePrefix:drivers/md/md.c]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:action_store SourceFile:drivers/md/md.c SourceLine:5329]] TruncatedOutput:false]
|
| 58/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 42830
output: 34
thoughts: 30
Thoughts: Here's my take on those thoughts:
**Analyzing `mddev_start_reshape` and `action_store`**
Okay, so I'm digging into this code, and I've hit a point where I need to clarify something. My immediate thought is, "Hang on, `mddev_start_reshape`... is that function *only* called from `action_store`?" It seems a bit odd, so I need to verify that assumption. Therefore, I need to focus on how `action_store` functions to understand this control flow. I'm going to jump right into examining `action_store` itself. Let's see what's going on in there.
|
| 59/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:action_store]
Results: map[SourceCode:5269: static ssize_t
5270: action_store(struct mddev *mddev, const char *page, size_t len)
5271: {
5272: int ret;
5273: enum sync_action action;
5274:
5275: if (!mddev->pers || !mddev->pers->sync_request)
5276: return -EINVAL;
5277:
5278: action = md_sync_action_by_name(page);
5279: if (action == ACTION_RESHAPE) {
5280: ret = mddev_suspend(mddev, true);
5281: if (ret)
5282: return ret;
5283: }
5284: retry:
5285: if (work_busy(&mddev->sync_work))
5286: flush_work(&mddev->sync_work);
5287:
5288: ret = mddev_lock(mddev);
5289: if (ret) {
5290: if (action == ACTION_RESHAPE)
5291: mddev_resume(mddev);
5292: return ret;
5293: }
5294:
5295: if (work_busy(&mddev->sync_work)) {
5296: mddev_unlock(mddev);
5297: goto retry;
5298: }
5299:
5300: /* TODO: mdadm rely on "idle" to start sync_thread. */
5301: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
5302: switch (action) {
5303: case ACTION_FROZEN:
5304: md_frozen_sync_thread(mddev);
5305: ret = len;
5306: goto out;
5307: case ACTION_IDLE:
5308: md_idle_sync_thread(mddev);
5309: break;
5310: case ACTION_RESHAPE:
5311: case ACTION_RECOVER:
5312: case ACTION_CHECK:
5313: case ACTION_REPAIR:
5314: case ACTION_RESYNC:
5315: ret = -EBUSY;
5316: goto out;
5317: default:
5318: ret = -EINVAL;
5319: goto out;
5320: }
5321: } else {
5322: switch (action) {
5323: case ACTION_FROZEN:
5324: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5325: ret = len;
5326: goto out;
5327: case ACTION_RESHAPE:
5328: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5329: ret = mddev_start_reshape(mddev);
5330: if (ret)
5331: goto out;
5332: break;
5333: case ACTION_RECOVER:
5334: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5335: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
5336: break;
5337: case ACTION_CHECK:
5338: set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
5339: fallthrough;
5340: case ACTION_REPAIR:
5341: set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
5342: set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
5343: fallthrough;
5344: case ACTION_RESYNC:
5345: case ACTION_IDLE:
5346: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
5347: break;
5348: default:
5349: ret = -EINVAL;
5350: goto out;
5351: }
5352: }
5353:
5354: if (mddev->ro == MD_AUTO_READ) {
5355: /* A write to sync_action is enough to justify
5356: * canceling read-auto mode
5357: */
5358: mddev->ro = MD_RDWR;
5359: md_wakeup_thread(mddev->sync_thread);
5360: }
5361:
5362: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
5363: md_wakeup_thread(mddev->thread);
5364: sysfs_notify_dirent_safe(mddev->sysfs_action);
5365: ret = len;
5366:
5367: out:
5368: mddev_unlock(mddev);
5369: if (action == ACTION_RESHAPE)
5370: mddev_resume(mddev);
5371: return ret;
5372: }
SourceFile:drivers/md/md.c]
|
| 60/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 44514
output: 35
thoughts: 603
Thoughts: **Debugging a RAID5 Reshape Transition**
Okay, let me think this through. `md_choose_sync_action` sets `MD_RECOVERY_RESHAPE` when `mddev->reshape_position` is not `MaxSector`. But if it *is* `MaxSector`, it doesn't set the flag. That's fine. Wait, who sets `mddev->reshape_position` if `mdadm` doesn't directly write to `sync_action`? Ah, `md_check_recovery` calls `md_choose_sync_action`, got it.
Okay, now let's go over `raid5_check_reshape`, it calls `check_reshape(mddev)`. If that returns 0, `update_raid_disks` returns 0. Cool, and then `mddev->delta_disks` gets set to 1. But, hold on... `mddev->reshape_position` *remains* `MaxSector`. Hmm. Then the array goes inactive, a stop is initiated, and then goes active again. Then `do_md_run` is called.
Inside `md_run`, `mddev->delta_disks` is *still* 1. Then `pers->run(mddev)` runs, which for RAID5 is `raid5_run`. And *there* it is:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
Since `mddev->reshape_position` *is* `MaxSector` and `mddev->delta_disks` *is* 1, the `BUG_ON` fires! Damn. I know the problem now.
So, why does `update_raid_disks` leave `mddev->delta_disks != 0` and `mddev->reshape_position == MaxSector`? It *only* sets `mddev->delta_disks`. It's expecting the reshape to *start* later. But if the array is stopped *before* the reshape begins, `mddev->delta_disks` remains non-zero, and there's the bug.
Wait, if the array is stopped, shouldn't `mddev->delta_disks` be cleared? That's the core question. Let's dig into `__md_stop` and see if it clears `mddev->delta_disks`. That should be the fix. Let me go check.
|
| 61/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 62/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 46024
output: 36
thoughts: 18
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Navigating the `do_md_stop` Conundrum**
No, that approach isn't working as I initially expected. I need to rethink this, it's not quite aligning with the intended outcome. Now, the key question arises: what about implementing the `do_md_stop` function? Is that the solution I'm seeking, or does it present another set of complications I haven't considered? I'm leaning towards further examination of that option, but it warrants careful analysis of the implications.
|
| 63/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 64/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 47372
output: 34
thoughts: 52
Thoughts: Okay, here's my take on those thoughts, framed as my own mental processing:
**Analyzing `do_md_stop`'s Cleanup Procedures**
Right, so `do_md_stop` isn't fully cleaning up `mddev->delta_disks`. That's a potential oversight, something I need to keep in mind for a robust shutdown sequence. Now, hold on... if the mode is zero, then `md_clean(mddev)` gets called. Interesting. This merits a closer look. I need to refresh my memory on the inner workings of `md_clean`. Let's drill down into that function and make sure it handles things properly. I need to confirm whether `md_clean` is responsible for clearing the `delta_disks` pointer, or if there's a disconnect in the cleanup logic.
|
| 65/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 66/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 48836
output: 36
thoughts: 668
Thoughts: **My Analysis of a Potential RAID5 Reshape Bug**
Okay, here's what's running through my head. `md_clean` is responsible for clearing `mddev->delta_disks`, that makes sense. However, `do_md_stop` with `mode == 2` ("inactive") doesn't call `md_clean`. This means `mddev->delta_disks` *isn't* cleared when the array transitions to the "inactive" state. Then, when the array becomes "active" again, `md_run` gets called, and crucially, `mddev->delta_disks` still has that non-zero value. Then `raid5_run` gets invoked, and we hit that `BUG_ON(mddev->delta_disks != 0)`.
My immediate question is, is this a problem with `do_md_stop` or perhaps `__md_stop`? When an array is stopped as "inactive" it isn't fully disassembled, that makes sense. Yet `mddev->pers` gets set to NULL. Then when restarted, `md_run` is called. If `mddev->delta_disks` is non-zero, this means a reshape was *requested* but never started.
Wait a second, isn't that behavior correct? Shouldn't a pending reshape be preserved across a stop/start cycle? If so, then `mddev->reshape_position` should also be preserved... But wasn't that `MaxSector` because the reshape hadn't actually begun? If `mddev->reshape_position` is `MaxSector`, that means *no* reshape is currently in progress. But `mddev->delta_disks` *being* non-zero indicates a reshape is pending.
Looking at `raid5_run` itself, the structure clarifies:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
Those `BUG_ON`s make it clear. `raid5_run` assumes that if `reshape_position` is `MaxSector`, *no* reshape is pending or in progress. But `update_raid_disks` sets `mddev->delta_disks` and expects that the reshape is kicked off by `md_check_recovery` or `action_store`. If the array is stopped before the reshape actually starts, that `mddev->delta_disks` value just remains there. And when the array is restarted, `raid5_run` blows up.
Now, let's explore if changes to `new_layout` or `new_chunk_sectors` can trigger this same behavior. If we change chunk size or layout while the array is active, that sets `mddev->new_chunk_sectors` or `mddev->new_layout`. Going to look at `chunk_size_store`.
|
| 67/2 |
2026/09/09 20:32 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:chunk_size_store]
Results: map[SourceCode:4480: static ssize_t
4481: chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
4482: {
4483: unsigned long n;
4484: int err;
4485:
4486: err = kstrtoul(buf, 10, &n);
4487: if (err < 0)
4488: return err;
4489:
4490: err = mddev_lock(mddev);
4491: if (err)
4492: return err;
4493: if (mddev->pers) {
4494: if (mddev->pers->check_reshape == NULL)
4495: err = -EBUSY;
4496: else if (!md_is_rdwr(mddev))
4497: err = -EROFS;
4498: else {
4499: mddev->new_chunk_sectors = n >> 9;
4500: err = mddev->pers->check_reshape(mddev);
4501: if (err)
4502: mddev->new_chunk_sectors = mddev->chunk_sectors;
4503: }
4504: } else {
4505: mddev->new_chunk_sectors = n >> 9;
4506: if (mddev->reshape_position == MaxSector)
4507: mddev->chunk_sectors = n >> 9;
4508: }
4509: mddev_unlock(mddev);
4510: return err ?: len;
4511: }
SourceFile:drivers/md/md.c]
|
| 68/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 50727
output: 34
thoughts: 533
Thoughts: **Reshape Parameter Management in MD Arrays**
Okay, so I've been digging into how reshape operations are handled in the MD array code, and I think I've spotted a potential issue. It looks like when `mddev->pers` is set, `chunk_size_store` triggers a call to `check_reshape` after setting `mddev->new_chunk_sectors`. If `check_reshape` goes through, `mddev->new_chunk_sectors` and `mddev->chunk_sectors` end up being different. The concern arises when the array is subsequently stopped and restarted because `raid5_run` could trigger a `BUG_ON` if those chunk sector values don't match.
My initial thought was that `do_md_stop` or `__md_stop` might be clearing these reshape parameters. But, after looking at the code, `__md_stop` only detaches the array, destroys the bitmap, and does some cleanup, but it **doesn't** reset `delta_disks`, `new_layout`, or `new_chunk_sectors`. That seems like the pending reshape is actually aborted, so those values should be reverted to their original settings.
The alternative would be that `md_run` takes care of clearing them if `reshape_position` is equal to `MaxSector`. I went and checked `md_run`, and I confirmed that it resets `mddev->level` and `mddev->new_level` to match the personality's ID, but it **doesn't** touch `new_layout`, `new_chunk_sectors`, or `delta_disks`.
So, it's starting to look like these reshape parameters are *not* properly reset when an array is stopped, leading to a potential mismatch upon restart. I'm going to have to check if there is any existing code that touches those values. It would be a problem if it doesn't.
|
| 69/2 |
2026/09/09 20:32 |
tool |
grepper |
0m
Args: map[Expression:delta_disks = 0 PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1520- mddev->reshape_position = MaxSector;
drivers/md/md.c:1521: mddev->delta_disks = 0;
drivers/md/md.c-1522- mddev->new_level = mddev->level;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2066- mddev->reshape_position = MaxSector;
drivers/md/md.c:2067: mddev->delta_disks = 0;
drivers/md/md.c-2068- mddev->new_level = mddev->level;
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4139- mddev->raid_disks -= mddev->delta_disks;
drivers/md/md.c:4140: mddev->delta_disks = 0;
drivers/md/md.c-4141- mddev->reshape_backwards = 0;
--
drivers/md/md.c-4160- mddev->chunk_sectors = mddev->new_chunk_sectors;
drivers/md/md.c:4161: mddev->delta_disks = 0;
drivers/md/md.c-4162- mddev->reshape_backwards = 0;
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5738- mddev->reshape_position = new;
drivers/md/md.c:5739: mddev->delta_disks = 0;
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7006- mddev->can_decrease_events = 0;
drivers/md/md.c:7007: mddev->delta_disks = 0;
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7974- mddev->new_layout = mddev->layout;
drivers/md/md.c:7975: mddev->delta_disks = 0;
drivers/md/md.c-7976- mddev->reshape_backwards = 0;
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8067- if (rv < 0) {
drivers/md/md.c:8068: mddev->delta_disks = 0;
drivers/md/md.c-8069- mddev->reshape_backwards = 0;
]
|
| 70/2 |
2026/09/09 20:32 |
llm |
debugger |
0m
Model:
Tokens:
input: 52652
output: 52
thoughts: 607
Thoughts: **Analyzing the MD Reshape Pending State**
Okay, let's break this down. My initial thought is: `md_clean` clears `delta_disks`, right? And that's only called when we stop the array with `mode == 0` during `do_md_stop`. So, if `mode == 2` (inactive), `md_clean` isn't called. So stopping and restarting the array in that mode preserves the reshape parameters.
But then, I remember `raid5_run` has this assumption: if `reshape_position == MaxSector`, there's no pending reshape, and `delta_disks` *must* be 0. Now, if `reshape_position == MaxSector`, it means the reshape *hasn't* started yet. So why is `raid5_run` triggering a `BUG_ON` in this situation? It seems itβs expecting that if a reshape is pending, `reshape_position` should be set, but that makes no sense, because `reshape_position` is set by `raid5_start_reshape`, which is called *after* `raid5_run`!
Right, `raid5_run` is called when the array starts. If a reshape was pending before the array was stopped, what *should* happen when it restarts? If the array was stopped, the reshape never actually began. So, when it restarts, should we resume it? But there's nothing to resume because it never started.
Ah, okay, I see now. If `delta_disks != 0` and `reshape_position == MaxSector`, it means the user requested a reshape, but it never actually started. Then, the user stopped the array. Now, when the user starts the array again, `raid5_run` is called, and that's when the `BUG_ON` happens. So, it seems like `raid5_run` doesn't support starting an array with a pending *but unstarted* reshape.
Now the question is, if a user requests a reshape (setting `mddev->delta_disks`), stops the array, then starts it again, should that pending reshape be discarded or kept? If we keep it, `raid5_run` *has* to handle it.
But `raid5_run` has these `BUG_ON` statements:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
Why are these even there? I need to check the git history of these `BUG_ON`s. That will likely tell me the original intent and what assumptions were being made.
|
| 71/2 |
2026/09/09 20:33 |
tool |
git-log |
0m
Args: map[CodeRegexp:BUG_ON\(mddev->delta_disks != 0\); Count:10 PathPrefix:drivers/md/raid5.c]
Results: map[Output:91adb56473fe md/raid5: refactor raid5 "run"
]
|
| 72/2 |
2026/09/09 20:33 |
llm |
debugger |
0m
Model:
Tokens:
input: 53996
output: 24
thoughts: 16
Thoughts: Okay, here's my interpretation of what's going through my mind, delivered as requested:
**Deconstructing Commit 91adb56473fe**
Alright, let's dive into commit `91adb56473fe`. Immediately, my brain starts running through the possibilities. What's the context here? Based purely on the commit hash, I have absolutely no clue yet. I need more information; perhaps the commit message, the changed files, the diff itself. This hash is just the key, not the content. I'm going to start by pulling up the relevant repository or branch, depending on my current task. I'll need to use my tooling, either command-line git commands, a GUI, or my IDE's Git integration. I know I have to check the files changed in order to give a complete summary.
|
| 73/2 |
2026/09/09 20:33 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 91adb56473febeeb3ef657bb5147ddd355465700
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:39 2009 +1100
md/raid5: refactor raid5 "run"
.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index edbc80c4d346..d019a85547b4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4164,95 +4164,49 @@ static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- int working_disks = 0;
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
}
- if ((mddev->level == 5 && !algorithm_valid_raid5(mddev->layout)) ||
- (mddev->level == 6 && !algorithm_valid_raid6(mddev->layout))) {
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
printk(KERN_ERR "raid5: %s: layout %d not supported\n",
- mdname(mddev), mddev->layout);
- return -EIO;
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
}
-
- if (mddev->chunk_size < PAGE_SIZE) {
- printk(KERN_ERR "md/raid5: chunk_size must be at least "
- "PAGE_SIZE but %d < %ld\n",
- mddev->chunk_size, PAGE_SIZE);
- return -EINVAL;
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
- int max_degraded = (mddev->level == 5 ? 1 : 2);
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "(reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old
- * geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*
- (mddev->raid_disks - max_degraded))) {
- printk(KERN_ERR "raid5: reshape_position not "
- "on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*
- (old_disks-max_degraded));
- /* here_old is the first stripe that we might need to read
- * from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for "
- "auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
}
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
@@ -4264,13 +4218,12 @@ static int run(mddev_t *mddev)
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
}
spin_lock_init(&conf->device_lock);
- mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4299,41 +4252,136 @@ static int run(mddev_t *mddev)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
} else
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
conf->expand_progress = mddev->reshape_position;
- /* device size must be a multiple of chunk size */
- mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
- mddev->resync_max_sectors = mddev->dev_sectors;
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
+ goto abort;
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 5 ? 1 : 2);
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "(reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+ conf = setup_conf(mddev);
+
+ if (conf == NULL)
+ return -EIO;
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
@@ -4341,6 +4389,10 @@ static int run(mddev_t *mddev)
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
@@ -4356,27 +4408,6 @@ static int run(mddev_t *mddev)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
" devices, algorithm %d\n", conf->level, mdname(mddev),
@@ -4419,6 +4450,8 @@ static int run(mddev_t *mddev)
"raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ mddev->queue->queue_lock = &conf->device_lock;
+
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
@@ -4430,7 +4463,11 @@ static int run(mddev_t *mddev)
return 0;
abort:
+ if (mddev->thread)
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 84456b1af204..c172371481c7 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -386,6 +386,11 @@ struct raid5_private_data {
int pool_size; /* number of disks in stripeheads in pool */
spinlock_t device_lock;
struct disk_info *disks;
+
+ /* When taking over an array from a different personality, we store
+ * the new thread here until we fully activate the array.
+ */
+ struct mdk_thread_s *thread;
};
typedef struct raid5_private_data raid5_conf_t;
]
|
| 74/2 |
2026/09/09 20:33 |
llm |
debugger |
0m
Model:
Tokens:
input: 59308
output: 55
thoughts: 1994
Thoughts: **Analysis of md Raid Array Stop/Start and Reshape**
Okay, let's break this down. It seems we've got a critical issue in the `md` RAID code. The problem stems from how reshape parameters are handled during array stop/start operations, specifically when an array is stopped with the 'inactive' state.
My initial thought is this: the `BUG_ON`s in `raid5_run` are really the key, and they were introduced back in 2009. The core of this bug revolves around `mddev->delta_disks`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk` being unexpectedly set and causing crashes when an array is restarted. These were originally only used for reshape operations. If `reshape_position == MaxSector`, it signals no reshape in progress; these values should be current.
The sequence that triggers this is: we use sysfs to change `raid_disks`, which sets `mddev->delta_disks`. Then, we write 'inactive' to the array state. Writing 'active' to the array state next leads to the crash. This sequence, perfectly valid from userspace, highlights the bug in the `md` core. The kernel crashes because `raid5_run` is called in this state, but it is not valid.
My first hunch was, perhaps `do_md_stop` should clear `mddev->delta_disks` or maybe `md_run` should clear it? If we stop the array, an incomplete reshape should be aborted. However, that isn't the whole answer, since `md_run` also has to account for potential assemble of an existing array. If `mddev->reshape_position` is `MaxSector`, then it *should* be cleared. But, if a reshape *was* in progress during the previous shutdown, `mddev->reshape_position` will be set to a different value. But what about superblocks?
Checking `super_1_validate` shows that if `MD_FEATURE_RESHAPE_ACTIVE` is *not* set, the superblock zeros `delta_disks`. Therefore, an incomplete reshape on a full stop isn't even saved on the block device! If we stop with `inactive`, `mddev` is in memory, and this *isn't* a problem, yet.
Thus, it is clear that `do_md_stop` (or potentially `__md_stop`) *isn't* clearing the pending reshape parameters when the state is 'inactive' (mode == 2). This is leading to the crash when the array is later activated again. Should `md_run` be clearing them too? Wait, no. We *want* to be able to set `raid_disks` and then start the array, so clearing it in `md_run` would break this functionality.
Let's look more closely at the sysfs `raid_disks_store` code. When the array is inactive (`mddev->pers == NULL`), but `reshape_position == MaxSector`, setting `raid_disks` does *not* set `delta_disks`. However, if the array *is* active, it will call `update_raid_disks`, which will set `delta_disks`. Thus, stopping the array (inactive) leads to the wrong state being stored in memory.
The fix, therefore, is to clear `mddev->delta_disks`, `mddev->new_layout`, `mddev->new_chunk_sectors`, and `mddev->new_level` when stopping the array in `__md_stop` or `do_md_stop`. But, do we need to do this *always*? No.
If `reshape_position != MaxSector`, we *do not* want to clear these, because a reshape *is* in progress. Stopping in 'inactive' is to preserve the reshape state. It *must* be kept in memory.
If `reshape_position == MaxSector`, *then* we need to clear these.
`__md_stop` has the ideal place. Inside `__md_stop`, if we check `reshape_position == MaxSector`, and clear these parameters. But, are there any other stops? After reviewing the code, it looks like `__md_stop` is only called from `do_md_stop`, so this is where the fix lies.
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk
|
| 75/2 |
2026/09/09 20:33 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:__md_stop SourceTreePrefix:drivers/md/md.c]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7193] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:md_stop SourceFile:drivers/md/md.c SourceLine:7108]] TruncatedOutput:false]
|
| 76/2 |
2026/09/09 20:33 |
llm |
debugger |
0m
Model:
Tokens:
input: 62500
output: 35
thoughts: 1988
Thoughts: **Analysis of RAID5 Array Reshape Parameters During Stop/Start Cycles**
Okay, so here's what I've been thinking about this RAID5 issue. We've got `md_stop` calling `__md_stop`. My concern is whether resetting fields within `__md_stop` will adversely affect `dm-raid`. Seems like, when `dm-raid` is stopping the array *and* `reshape_position == MaxSector`, clearing the pending reshape parameters is correct because a reshape that hasn't started should be aborted.
The key is when `mddev->reshape_position != MaxSector`. That means a reshape is in progress, so we need to preserve parameters like `delta_disks`. Restarting will call `raid5_run`, which will then check for `reshape_position != MaxSector`, and handle the situation. This is exactly what we expect.
Now, I need to make sure I'm not missing any other places where `delta_disks` might get set without a corresponding `reshape_position` reset. Looking through the code, I see:
* `update_raid_disks` sets `delta_disks`.
* `chunk_size_store` sets `new_chunk_sectors`.
* `layout_store` sets `new_layout`.
* `level_store` sets `new_level`.
In *all* of these cases, if the array is active, they set the `new_*` fields and call `check_reshape`. If a user then stops the array (goes inactive), `__md_stop` is called. If we *don't* clear those pending reshape parameters in `__md_stop`, the next 'active' state is going to crash in `raid5_run`.
Here's the critical point. What if a user changes the RAID attributes while the array is inactive? If `reshape_position == MaxSector`, the sysfs attribute stores just set the actual attributes (`raid_disks`, `chunk_sectors`, `layout`, `level`). Because the array is inactive, `delta_disks` remains zero (or `new_layout` is updated, not `new_layout_sectors`). This means that when the array is subsequently started, `raid5_run` will see `delta_disks == 0`, `new_layout == layout`, and everything is copacetic. No crash.
So the crash *only* happens when a user changes RAID attributes *while* the array is active. This sets `delta_disks != 0` (or `new_layout != layout`, etc.), and then stops and restarts the array. Because the pending reshape parameters are *not* cleared when the array is stopped.
Therefore, the fix is clear: we need to clear those pending reshape parameters in `__md_stop` if `reshape_position == MaxSector`. Specifically, `mddev->delta_disks`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors` have to be reset.
To solidify my understanding, let's nail down the exact sequence of events that triggers the crash:
1. Create RAID5 (3 disks).
2. Start the array (array\_state = "active"). `md_run` is called, `raid5_run` is called.
3. Write "4" to raid\_disks sysfs. `raid_disks_store` is called. This leads to `update_raid_disks` being called. Which sets `mddev->delta_disks = 1`. `mddev->reshape_position` is still `MaxSector`.
4. Write "inactive" to array\_state. `array_state_store` calls `do_md_stop` which calls `__md_stop`. `__md_stop` sets `mddev->pers = NULL` but DOES NOT reset `mddev->delta_disks`.
5. Write "active" again. `array_state_store` is called. Since `mddev->pers` is NULL, `md_run` calls `pers->run` (which is `raid5_run`). `raid5_run` then hits the `BUG_ON` because `mddev->delta_disks` is not zero and `reshape_position` is still `MaxSector`. BOOM.
So, the fix is to put that reset within `__md_stop` when the pending reshape is aborted:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout =
|
| 77/2 |
2026/09/09 20:33 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 78/2 |
2026/09/09 20:33 |
llm |
debugger |
0m
Model:
Tokens:
input: 65804
output: 38
thoughts: 1330
Thoughts: **Analyzing the Reshape Logic and its Interaction with Array Stop/Start**
Okay, so I'm diving into this `__md_stop` function and the reshape process. First, that code block in `__md_stop`...if `mddev->reshape_position` is `MaxSector`, it resets those reshape parameters: `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`. My initial thought is to confirm that if `reshape_position` is `MaxSector`, then a reshape *isn't* in progress. The reshape starts by setting `reshape_position` to `conf->reshape_progress`, and that value's then updated during the process, and finally, it's set back to `MaxSector` upon completion. So, if `reshape_position` *is* equal to `MaxSector`, it unequivocally means no reshape is active. That makes sense.
Now, my mind goes to other uses of `delta_disks`. What if the user changes `raid_disks` *while* the array is running, and then tries to kick off a reshape by writing to `sync_action`? If they do, that'll call `action_store`, which calls `mddev_start_reshape`. In turn, that calls `pers->start_reshape`. In our specific case, `raid5_start_reshape` would be used, and it utilizes `mddev->delta_disks` to start the reshape and sets the `reshape_position`. So, this is the expected flow. Makes sense so far. If the user stops the array *before* writing to `sync_action`, the reshape is effectively aborted. This is logical, because a reshape hasn't started and we're stopping the array.
But here's a wrinkle: what if the array is *stopped* and then *assembled again*? If we reassemble, `mddev->delta_disks` will be read from the superblock. But, I recall from `super_1_validate` that if `MD_FEATURE_RESHAPE_ACTIVE` isn't set, `delta_disks` is set to 0. And, `MD_FEATURE_RESHAPE_ACTIVE` is *only* set if `mddev->reshape_position != MaxSector`. This is important, so the pending reshape isn't saved to the superblock. The pending reshape is not persisted. So, aborting it in `__md_stop` is perfectly consistent with how the superblock works. It makes sense, really.
Let's check `super_90_validate` just to be completely certain. Okay, here we see the same logic, although slightly different implementation. If `mddev->minor_version` is >= 91, then we'll load reshape parameters (including `delta_disks`) from the superblock. But if not, we reset the parameters as they're now invalid. And, if `reshape_position` is *not* `MaxSector`, we set `minor_version` to 91 in `super_90_sync`. If `reshape_position` *is* `MaxSector`, we set it to 90. So, again, if `reshape_position == MaxSector`, we *do not* save the reshape parameters.
Okay, that nails it. A pending reshape that *hasn't* started is purely an in-memory state. If the array is stopped, this in-memory state needs to be cleared. Since `__md_stop` *doesn't* clear this, restarting the array then uses the stale in-memory state, and that's what triggers the `BUG_ON` in `raid5_run`. Bingo.
Now, let me review that C reproducer again to confirm it matches my understanding:
1. `raid_disks` changed to 4. Since the array is active, `update_raid_disks` sets `mddev->delta_disks = 1`.
2. `array_state` is set to `inactive`. That calls `__md_stop`, and it *doesn't* clear `mddev->delta_disks`.
3. `array_state` set to `active`. That starts the array. `raid5_run` gets called.
4. `raid5_run` sees `mddev->reshape_position == MaxSector` and `mddev->delta_disks == 1` and hits `BUG_ON`.
Yes, that reproducer perfectly encapsulates the issue.
Is there any other personality affected? I'll check `raid10_run` to be sure.
|
| 79/2 |
2026/09/09 20:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid10.c Name:raid10_run]
Results: map[SourceCode:3943: static int raid10_run(struct mddev *mddev)
3944: {
3945: struct r10conf *conf;
3946: int i, disk_idx;
3947: struct raid10_info *disk;
3948: struct md_rdev *rdev;
3949: sector_t size;
3950: sector_t min_offset_diff = 0;
3951: int first = 1;
3952: int ret = -EIO;
3953:
3954: if (mddev->private == NULL) {
3955: conf = setup_conf(mddev);
3956: if (IS_ERR(conf))
3957: return PTR_ERR(conf);
3958: mddev->private = conf;
3959: }
3960: conf = mddev->private;
3961: if (!conf)
3962: goto out;
3963:
3964: rcu_assign_pointer(mddev->thread, conf->thread);
3965: rcu_assign_pointer(conf->thread, NULL);
3966:
3967: if (mddev_is_clustered(conf->mddev)) {
3968: int fc, fo;
3969:
3970: fc = (mddev->layout >> 8) & 255;
3971: fo = mddev->layout & (1<<16);
3972: if (fc > 1 || fo > 0) {
3973: pr_err("only near layout is supported by clustered"
3974: " raid10\n");
3975: goto out_free_conf;
3976: }
3977: }
3978:
3979: rdev_for_each(rdev, mddev) {
3980: long long diff;
3981:
3982: disk_idx = rdev->raid_disk;
3983: if (disk_idx < 0)
3984: continue;
3985: if (disk_idx >= conf->geo.raid_disks &&
3986: disk_idx >= conf->prev.raid_disks)
3987: continue;
3988: disk = conf->mirrors + disk_idx;
3989:
3990: if (test_bit(Replacement, &rdev->flags)) {
3991: if (disk->replacement)
3992: goto out_free_conf;
3993: disk->replacement = rdev;
3994: } else {
3995: if (disk->rdev)
3996: goto out_free_conf;
3997: disk->rdev = rdev;
3998: }
3999: diff = (rdev->new_data_offset - rdev->data_offset);
4000: if (!mddev->reshape_backwards)
4001: diff = -diff;
4002: if (diff < 0)
4003: diff = 0;
4004: if (first || diff < min_offset_diff)
4005: min_offset_diff = diff;
4006:
4007: disk->head_position = 0;
4008: first = 0;
4009: }
4010:
4011: if (!mddev_is_dm(conf->mddev)) {
4012: int err = raid10_set_queue_limits(mddev);
4013:
4014: if (err) {
4015: ret = err;
4016: goto out_free_conf;
4017: }
4018: }
4019:
4020: /* need to check that every block has at least one working mirror */
4021: if (!enough(conf, -1)) {
4022: pr_err("md/raid10:%s: not enough operational mirrors.\n",
4023: mdname(mddev));
4024: goto out_free_conf;
4025: }
4026:
4027: if (conf->reshape_progress != MaxSector) {
4028: /* must ensure that shape change is supported */
4029: if (conf->geo.far_copies != 1 &&
4030: conf->geo.far_offset == 0)
4031: goto out_free_conf;
4032: if (conf->prev.far_copies != 1 &&
4033: conf->prev.far_offset == 0)
4034: goto out_free_conf;
4035: }
4036:
4037: mddev->degraded = 0;
4038: for (i = 0;
4039: i < conf->geo.raid_disks
4040: || i < conf->prev.raid_disks;
4041: i++) {
4042:
4043: disk = conf->mirrors + i;
4044:
4045: if (!disk->rdev && disk->replacement) {
4046: /* The replacement is all we have - use it */
4047: disk->rdev = disk->replacement;
4048: disk->replacement = NULL;
4049: clear_bit(Replacement, &disk->rdev->flags);
4050: }
4051:
4052: if (!disk->rdev ||
4053: !test_bit(In_sync, &disk->rdev->flags)) {
4054: disk->head_position = 0;
4055: mddev->degraded++;
4056: if (disk->rdev &&
4057: disk->rdev->saved_raid_disk < 0)
4058: conf->fullsync = 1;
4059: }
4060:
4061: if (disk->replacement &&
4062: !test_bit(In_sync, &disk->replacement->flags) &&
4063: disk->replacement->saved_raid_disk < 0) {
4064: conf->fullsync = 1;
4065: }
4066: }
4067:
4068: if (mddev->resync_offset != MaxSector)
4069: pr_notice("md/raid10:%s: not clean -- starting background reconstruction\n",
4070: mdname(mddev));
4071: pr_info("md/raid10:%s: active with %d out of %d devices\n",
4072: mdname(mddev), conf->geo.raid_disks - mddev->degraded,
4073: conf->geo.raid_disks);
4074: /*
4075: * Ok, everything is just fine now
4076: */
4077: mddev->dev_sectors = conf->dev_sectors;
4078: size = raid10_size(mddev, 0, 0);
4079: md_set_array_sectors(mddev, size);
4080: mddev->resync_max_sectors = size;
4081: set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags);
4082:
4083: if (md_integrity_register(mddev))
4084: goto out_free_conf;
4085:
4086: if (conf->reshape_progress != MaxSector) {
4087: unsigned long before_length, after_length;
4088:
4089: before_length = ((1 << conf->prev.chunk_shift) *
4090: conf->prev.far_copies);
4091: after_length = ((1 << conf->geo.chunk_shift) *
4092: conf->geo.far_copies);
4093:
4094: if (max(before_length, after_length) > min_offset_diff) {
4095: /* This cannot work */
4096: pr_warn("md/raid10: offset difference not enough to continue reshape\n");
4097: goto out_free_conf;
4098: }
4099: conf->offset_diff = min_offset_diff;
4100:
4101: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
4102: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
4103: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
4104: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
4105: }
4106:
4107: return 0;
4108:
4109: out_free_conf:
4110: md_unregister_thread(mddev, &mddev->thread);
4111: raid10_free_conf(conf);
4112: mddev->private = NULL;
4113: out:
4114: return ret;
4115: }
SourceFile:drivers/md/raid10.c]
|
| 80/2 |
2026/09/09 20:34 |
llm |
debugger |
0m
Model:
Tokens:
input: 70774
output: 32
thoughts: 2147
Thoughts: **Analysis of RAID Reshape Parameter Inconsistency and Proposed Fix**
Alright, let's break this down. It seems like the `raid10_run` code doesn't have the same `BUG_ON` checks for `delta_disks` and related reshape parameters as `raid5_run`. However, even though that's the starting point, there's a wider issue at play. The fundamental problem is that if `delta_disks` isn't cleared when an array is stopped before a reshape begins, there's a potential mismatch between `mddev->raid_disks` and `conf->geo.raid_disks`, which can cause trouble later.
I started thinking, what happens in `setup_conf`? That function in `raid10.c` uses `mddev->raid_disks` and `mddev->delta_disks`. If `delta_disks` isn't cleared, `setup_conf` will incorrectly assume a reshape is pending. That's no good. And if the reshape hasn't started (`reshape_progress == MaxSector`), the code might not handle it right.
So the core of the problem is this: Clearing these parameters in `__md_stop` is the correct approach and should apply to *all* personalities.
I wrote the suggested fix.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
Now, what if `mddev->reshape_position != MaxSector`? Then, the array *is* in the middle of a reshape, it is important to not reset the values. When the array is stopped, `__md_stop` is called. When restarted, `md_run` calls `pers->run(mddev)`. If using the `raid5` personality, the kernel knows that `mddev->reshape_position != MaxSector`, and should continue with the reshape. This is all correct.
I made sure to look for other calls to `__md_stop`. It's called by `md_stop`, which calls `__md_stop_writes` and `__md_stop`, and `do_md_stop` does the same. So, `__md_stop` is *the* central point where the personality is detached. If `reshape_position == MaxSector`, any pending reshape that hasn't started is effectively aborted. This also aligns with the superblock behavior where a *pending* reshape is *not* saved. It's a clean abortion of the pending state.
I also double-checked `mddev->new_level`. If `mddev->level` is `LEVEL_NONE`, then `mddev->new_level` will also be `LEVEL_NONE`, which is fine.
I need to make sure I'm resetting the right fields.
`mddev->reshape_backwards` is getting reset. `mddev->delta_disks` is reset. `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors` are also reset. Those should cover the `BUG_ON`s that were found in `raid5_run`. I also checked those `BUG_ON`s specifically.
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
Yes, that's exactly what my fix covers.
The root cause, in essence, is that a sequence of sysfs writes is leaving the `mddev` structure in an inconsistent state. Let me enumerate the sequence of events.
1. A RAID5 array is created and becomes active.
|
| 81/2 |
2026/09/09 20:34 |
tool |
grepper |
0m
Args: map[Expression:md_stop PathPrefix:drivers/md/dm-raid.c]
Results: map[Output:drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3318-bad_unlock:
drivers/md/dm-raid.c:3319: md_stop(&rs->md);
drivers/md/dm-raid.c-3320- mddev_unlock(&rs->md);
--
drivers/md/dm-raid.c=3327=static void raid_dtr(struct dm_target *ti)
--
drivers/md/dm-raid.c-3331- mddev_lock_nointr(&rs->md);
drivers/md/dm-raid.c:3332: md_stop(&rs->md);
drivers/md/dm-raid.c-3333- rs->md.dm_gendisk = NULL;
--
drivers/md/dm-raid.c=3857=static void raid_postsuspend(struct dm_target *ti)
--
drivers/md/dm-raid.c-3866- */
drivers/md/dm-raid.c:3867: md_stop_writes(&rs->md);
drivers/md/dm-raid.c-3868- mddev_suspend(&rs->md, false);
]
|
| 82/2 |
2026/09/09 20:34 |
llm |
debugger-compressor |
0m
Model:
Reply: ### 1. Summary of Approaches and Results
* **Crash Analysis:**
* Crash location: `kernel BUG at drivers/md/raid5.c:8117!` inside `raid5_run()`.
* Trigger assertion: `BUG_ON(mddev->delta_disks != 0);` executed in the `else` branch of `if (mddev->reshape_position != MaxSector)`.
* Call stack: `md_run` $\to$ `pers->run` (`raid5_run`) triggered via sysfs `array_state` store (`active`).
* **Reproducer Examination:**
1. Creates RAID5 array `md123` with 3 disks + 1 spare disk, `chunk_size = 4096`, `resync_start = none`.
2. Starts array: `array_state = "active"`.
3. Freezes sync thread: `sync_action = "frozen"`.
4. Modifies raid disk count: `raid_disks = "4"`.
5. Stops array: `array_state = "inactive"`.
6. Restarts array: `array_state = "active"`.
7. Crash occurs during restart.
* **Code Path Analysis:**
* Writing to sysfs `raid_disks` with an active personality (`mddev->pers != NULL`) invokes `update_raid_disks(mddev, 4)` in `drivers/md/md.c:4433`.
* `update_raid_disks()` calculates `mddev->delta_disks = raid_disks - mddev->raid_disks` (sets `delta_disks = 1`) and calls `mddev->pers->check_reshape(mddev)`.
* `raid5_check_reshape()` calls `check_reshape(mddev)`. Since conditions are valid, it returns `0`.
* `update_raid_disks()` returns `0`, leaving `mddev->delta_disks = 1`. Crucially, it does **not** update `mddev->reshape_position` (which remains `MaxSector`) nor does it immediately start reshaping (the reshape thread was frozen and reshape has not officially started via `start_reshape()`).
* Setting sysfs `array_state = "inactive"` triggers `array_state_store()` $\to$ `do_md_stop(mddev, 2)`.
* `do_md_stop(mddev, 2)` calls `__md_stop(mddev)`.
* `__md_stop(mddev)` destroys the personality (`mddev->pers = NULL`, `mddev->private = NULL`, etc.), but **fails** to reset reshape-related configuration fields: `delta_disks`, `new_layout`, `new_chunk_sectors`, `reshape_backwards`.
* Note: complete stop (`mode == 0`) invokes `md_clean(mddev)`, which properly clears `delta_disks`, `reshape_backwards`, `new_layout`, `new_chunk_sectors`, etc. However, mode 2 ("inactive") bypasses `md_clean()`.
* Setting sysfs `array_state = "active"` invokes `do_md_run(mddev)` $\to$ `md_run(mddev)`.
* In `md_run()`, `mddev->delta_disks` is still `1`, while `mddev->reshape_position` is `MaxSector`.
* `md_run()` calls `pers->run(mddev)` (`raid5_run()`).
* In `raid5_run()`:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <-- Hits BUG_ON because delta_disks == 1
}
```
* Identical vulnerability exists for `chunk_size_store()` and `layout_store()`: if chunk size or layout is updated while active and array is stopped to `inactive` before reshape starts, `new_chunk_sectors != chunk_sectors` or `new_layout != layout` will trigger the sibling `BUG_ON`s in `raid5_run()`.
---
### 2. Hypotheses and Root Cause
* **Root Cause:**
When an MD array is temporarily stopped/deactivated (`array_state = "inactive"`, i.e., `do_md_stop(mddev, 2)`), pending reshape configurations (such as `delta_disks`, `new_chunk_sectors`, `new_layout`) where reshape has not yet started (`mddev->reshape_position == MaxSector`) are not cleared or rolled back in `__md_stop()` or `do_md_stop()`.
Upon restarting the array (`array_state = "active"` $\to$ `md_run()`), personality run routines like `raid5_run()` expect that if `reshape_position == MaxSector`, there are no pending reshape parameters (`delta_disks == 0`, `new_chunk_sectors == chunk_sectors`, `new_layout == layout`, etc.), and trigger `BUG_ON()`.
* **Active Theories for Fix:**
* **Option A (in `__md_stop()` or `do_md_stop()`):**
If stopping an array when reshape is not actually in progress (`mddev->reshape_position == MaxSector`), cancel/revert pending reshape settings:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
* **Option B (in `md_run()`):**
At array startup, if `mddev->reshape_position == MaxSector`, sanitize/revert any unstarted reshape geometry before calling `pers->run(mddev)`.
* **Option C (in personality run routines like `raid5_run()`):**
Evaluate whether personality run routines should return `-EINVAL` instead of `BUG_ON()` or whether the MD core layer is responsible for maintaining the invariants.
---
### 3. Key Files, Functions, and Code Snippets
* **`drivers/md/raid5.c:8113-8118` (`raid5_run`):**
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
* **`drivers/md/md.c:8034-8072` (`update_raid_disks`):**
```c
mddev->delta_disks = raid_disks - mddev->raid_disks;
if (mddev->delta_disks < 0)
mddev->reshape_backwards = 1;
else if (mddev->delta_disks > 0)
mddev->reshape_backwards = 0;
rv = mddev->pers->check_reshape(mddev);
if (rv < 0) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
}
return rv;
```
* **`drivers/md/md.c:7084-7098` (`__md_stop`):**
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
```
* **`drivers/md/md.c:6967-7030` (`md_clean` - only called on `do_md_stop(..., mode = 0)`):**
```c
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = LEVEL_NONE;
mddev->new_layout = 0;
mddev->new_chunk_sectors = 0;
```
---
### 4. Watch Items & Next Steps
* No loops observed.
* Need to check if other personalities (RAID10, RAID1, etc.) have similar invariants or assumptions.
* Need to verify how `mdadm` handles unstarted reshapes vs in-progress reshapes across stop/start.
* Next step: Determine whether `__md_stop()` or `md_run()` is the canonical location in the MD subsystem to reset unstarted reshape parameters, and craft the patch explanation.
Tokens:
input: 57715
output: 2211
thoughts: 0
|
| 83/2 |
2026/09/09 20:34 |
llm |
debugger |
0m
Model:
Tokens:
input: 31950
output: 34
thoughts: 239
Thoughts: **My Analysis of the `md` RAID Cleanup**
Okay, so I'm digging into how `dm-raid` handles stopping and destruction of RAID arrays, specifically focusing on potential cleanup issues. My initial observation is that `md_stop` is called in two specific `dm-raid` contexts: within `raid_ctr` if there's an error, and during `raid_dtr`, which is the destructor. Crucially, I see that it's *not* called on suspend. Instead, we have `md_stop_writes` followed by `mddev_suspend`. This tells me that `md_stop` is reserved for the full teardown of the array. So, when the array is being destroyed in `raid_ctr` or `raid_dtr`, clearing any pending reshape parameters is safe, as the array is going away anyway.
Now, my attention shifts to `do_md_stop`. This is where things get interesting. It looks like `do_md_stop` is called from `array_state_store` with the `mode` parameter set to either 2 ("inactive") or 0 ("clear"). If `mode` is 0, we subsequently call `md_clean`, which already cleans up the fields I'm interested in. However, the problem is that if `mode` is set to 2, `md_clean` is *not* called. This is it! This is precisely where the bug lies: the reshape parameters might be left dangling in memory after the array becomes inactive, and we have a potential data corruption.
Hold on a second... Could we just call `md_clean` in `do_md_stop` *even* when `mode` is 2? This seems like a straightforward fix, but I need to make sure I understand the implications before I go further. Let me take a quick look at `md_clean` to confirm its behavior, and then I'll formulate a test strategy.
|
| 84/2 |
2026/09/09 20:34 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 85/2 |
2026/09/09 20:34 |
llm |
debugger |
0m
Model:
Tokens:
input: 33840
output: 36
thoughts: 984
Thoughts: **Analyzing Array Reshape Parameter Clearing**
Okay, so I need to be *very* careful here. `md_clean` is out of the question. That wipes everythingβ`raid_disks`, `level`, all of it. We're dealing with an `inactive` state, where the goal is to *pause* the array, not destroy its configuration. We need to preserve the configuration for a smooth restart. So, `md_clean` is a non-starter.
The core issue is clearing those *pending* reshape parameters, but only when we should. The key is `reshape_position`.
If `reshape_position != MaxSector`, then the array is in the middle of a reshape, right? When we make it `inactive`, we *must* keep those reshape parameters - `delta_disks`, `new_level`, etc. We need them so we can resume the reshape later. So, we *only* want to clear them when `reshape_position == MaxSector`.
Now, let's verify how the `mddev->new_level` is set. If we look at the code, in `md_clean`, it's set to `LEVEL_NONE`. But in `super_1_validate` and `super_90_validate`, it's set to `mddev->level`. This makes sense, because:
```c
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
It's clear that it is appropriate to set it to `mddev->level` for an array that *isn't* reshaping. This perfectly lines up with those `BUG_ON`s in `raid5_run`:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
Okay, so the `new_level` setting is correct. Good.
Next, I have to make sure that no other code paths are playing with this. Let's look for other uses of `delta_disks`.
In `md_run`, if `mddev->reshape_position != MaxSector` and `mddev->pers->start_reshape == NULL`, it sets `mddev->reshape_position = MaxSector`. That doesn't clear `delta_disks`, but that is fine, because `mddev->pers->start_reshape == NULL` means that it cannot reshape anyway, therefore `delta_disks == 0`.
Now, let's consider a tricky scenario: `mddev->reshape_position != MaxSector`, the array is stopped, and the user changes `raid_disks`. If that happens, then we need to look at `raid_disks_store`. Here's the relevant code:
```c
} else if (mddev->reshape_position != MaxSector) {
struct md_rdev *rdev;
int olddisks = mddev->raid_disks - mddev->delta_disks;
/* Cannot change to a shape that is not supported */
if (n < olddisks)
return -EINVAL;
if (olddisks == 10)
return -EINVAL;
mddev->delta_disks = n - olddisks;
mddev->raid_disks = n;
mddev->reshape_backwards = (mddev->delta_disks < 0);
} else
mddev->raid_disks = n;
```
This *allows* changing `raid_disks` while the array is inactive but *reshaping*. It updates both `delta_disks` and `raid_disks`. This is still correct because `reshape_position != MaxSector`, so the reshape is still "in progress" and we don't hit those `BUG_ON`s in `raid5_run`. Excellent. It looks like the handling is robust here.
Just to be thorough, I'm going to scan the code for other calls to `__md_stop`. We checked `md_stop` and `do_md_stop`, so let's make sure we've covered all the callers of `
|
| 86/2 |
2026/09/09 20:35 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 87/2 |
2026/09/09 20:35 |
llm |
debugger |
0m
Model:
Tokens:
input: 37045
output: 1136
thoughts: 657
Thoughts: **My Analysis of the RAID Reshape Bug**
Okay, so I've finally gotten to the bottom of this. Here's what I've figured out: the `do_md_stop` function is calling `__md_stop` if the RAID device's personality is active. It also calls `md_clean` under certain conditions. The key is, `__md_stop` is the perfect spot to clear any pending reshape parameters.
Here's the crash scenario and the "why": We've got a crash, and it's triggered by a `BUG_ON` call. The sequence is: we change the number of RAID disks while the array is active. Then, the array is stopped (transitioning to the 'inactive' state), and finally, we restart it. The problem? When we change the RAID disks, `update_raid_disks` is called, and this function sets `mddev->delta_disks`. However, because the reshape hasn't actually *started* yet, `mddev->reshape_position` remains at `MaxSector`.
When we then stop the array (`mode == 2`), `__md_stop` detaches the personality but *doesn't* clear `mddev->delta_disks`. This is the crux of the issue. When we restart the array, `raid5_run` is called and detects `reshape_position == MaxSector` but, crucially, also sees a non-zero `delta_disks`. This is a bad combination, and it triggers the `BUG_ON`.
The fix is straightforward, and this makes sense given the logic of the superblock: In `__md_stop`, if `mddev->reshape_position` is still at `MaxSector`, we need to *clear* all the pending reshape parameters: `delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors`, and `reshape_backwards`. This mirrors the behavior of the superblock, in which pending changes that have not been started are not committed to the on-disk metadata.
Now, there's a potential alternative area: where else could `mddev->delta_disks` be set? The major culprit is `update_raid_disks`, but there's a related function `level_store` that is also relevant. Looking at `level_store` revealed another potential source of this issue. If the array is active, `check_reshape` is called. If the check succeeds, it sets `new_level` and some others. But, if the array is subsequently stopped, `new_level` and the others are not cleared. Then, when the array is restarted, `raid5_run` will trigger the `BUG_ON(mddev->level != mddev->new_level)` check. The fix I proposed for `__md_stop` neatly covers this scenario as well, ensuring that these parameters are cleared whenever a reshape isn't actually started. So, I think we have a robust solution here.
|
| 88/1 |
2026/09/09 20:35 |
agent |
history-explorer |
2m
Model:
Instruction:
You are an experienced Linux kernel developer researching prior art for fixing a kernel bug.
You are given a bug explanation. This explanation details the root cause of the bug resulting
from debugging, but does not provide the final fix strategy. Your goal is to explore how
similar bugs were fixed in the past in the same subsystem or files.
CRITICAL: Do NOT attempt to debug the issue further or write a patch for it yourself.
Your ONLY objective is to research and provide the necessary historical context.
Use the git-log tool with the Since parameter set to "3 years" to focus on recent history.
Search for commits that address issues with similar root causes (e.g. similar missing locks,
incorrect refcounting, or similar error path bugs) in the affected files.
Your final reply must summarize your findings: what idioms, locking rules, or common patterns
should be followed when writing a fix for this bug based on how previous similar bugs were addressed.
If you find no relevant past fixes, clearly state that.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash is:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The explanation of the root cause of the bug is:
An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
Reply: Based on an analysis of the MD subsystem's history and source code, your proposed fix perfectly aligns with the established idioms, locking rules, and common patterns used by kernel developers to address similar issues.
Here is a summary of the findings:
### 1. Idioms and Common Patterns
* **Checking Reshape Status:** The standard idiom to determine if a reshape is *not* currently active or in progress is checking `mddev->reshape_position == MaxSector`. This is used extensively throughout the MD core (e.g., in `super_1_validate()`, `super_90_validate()`, `md_start_sync()`, and `mddev_start_reshape()`).
* **Clearing Reshape State:** When a reshape is aborted, finished, or found to be inactive, the standard pattern is to reset the pending reshape parameters to their current/default values. Your proposed fix mirrors the exact logic used in `super_1_validate()` and `super_90_validate()` when the `MD_FEATURE_RESHAPE_ACTIVE` flag is not set:
```c
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
Applying this same reset logic in `__md_stop()` when `reshape_position == MaxSector` is the correct and idiomatic way to clean up stale in-memory state.
### 2. Locking Rules
* Modifying `mddev` fields like `delta_disks` and `new_level` must be done while holding the `mddev->reconfig_mutex`.
* `__md_stop()` is called from two places: `do_md_stop()` and `md_stop()`. In both cases, the caller is strictly required to hold `mddev->reconfig_mutex` (acquired via `mddev_lock()` or `mddev_lock_nointr()`). In fact, `md_stop()` explicitly contains `lockdep_assert_held(&mddev->reconfig_mutex);`.
* Additionally, the sync thread is guaranteed to be stopped before `__md_stop()` is invoked (e.g., `stop_sync_thread()` is called earlier in `do_md_stop()`).
* **Conclusion on Locking:** Modifying these fields directly inside `__md_stop()` is completely safe, race-free, and requires no additional locking.
### 3. Relevant Past Fixes
* **Commit `305a5170dc5c` ("md/raid5: avoid BUG_ON() while continue reshape after reassembling")**: This recent commit (June 2024) addressed a highly similar issue where a reverted reshape (using `mdadm --revert-reshape`) left stale state that triggered a `BUG_ON()` in `reshape_request()`. The fix involved gracefully handling the stale state by converting the `BUG_ON()` to a `WARN_ON()` and returning `MaxSector` to abort the reshape. This demonstrates a recent focus on making the reshape code more robust against stale state and avoiding kernel panics.
* **Commit `c7d34d17ea43` ("md: recheck spare changes before starting sync")**: This commit highlights the importance of checking `mddev->reshape_position == MaxSector` strictly under the `reconfig_mutex` to avoid race conditions with array state changes. Since your fix is inside `__md_stop()` where the mutex is already held, it adheres perfectly to this principle.
**Summary:** Your proposed fix is structurally sound, safe, and follows the exact conventions used by the MD subsystem for cleaning up aborted or inactive reshapes.
|
| 89/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 7548
output: 38
thoughts: 285
Thoughts: **My Approach to Addressing a Kernel Bug in the MD Subsystem**
Okay, so I'm tackling this kernel bug in the MD subsystem. The core issue, as I understand it, stems from a failure to properly clear pending reshape parameters when an MD array is temporarily stopped before the reshape actually kicks off. The suggested fix seems to be targeting `__md_stop()` in `drivers/md/md.c`, and specifically involves clearing `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` under the condition that `mddev->reshape_position` is equal to `MaxSector`. Makes sense, the idea being to ensure a clean slate before deactivation.
But before I dive into the code and implement this fix, I need to understand the *style* of doing this. What are the common idioms and patterns used when making changes like this in the MD subsystem? What are the relevant locking rules? Are there established ways of handling similar corner cases? I need to know how to fit this change in properly.
Therefore, my next step is a deep dive into the history. I'm going to leverage `git log` to thoroughly examine commits in `drivers/md/md.c` and potentially `drivers/md/raid5.c` (since RAID5 is a common use case for reshaping) over the past three years. I'll search for keywords and phrases related to reshape operations, array stopping/deactivation, and the specific parameters like "delta_disks", "new_level", "__md_stop", and "md_stop". My aim is to identify past commits that dealt with similar issues or modified related code. This should give me valuable insights into how these kinds of problems have been addressed previously.
If I find relevant examples, I'll analyze those commits carefully to understand the thought process, locking strategies, and coding conventions employed. This will inform my own implementation, ensuring it aligns with the existing codebase and best practices. If, however, my search yields nothing, or if any related fixes are ancient and pre-date the current idioms, then I'll need to develop the fix following sound kernel coding principles and be sure to clearly document any deviation from prior practice.
|
| 90/2 |
2026/09/09 20:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks PathPrefix:drivers/md/ Since:3 years]
Results: map[Output:1cbc6ea5fa65 md/md-llbitmap: grow the page cache in place for reshape
8e9171decb5e md/raid10: resize r10bio_pool for reshape
189f164e573e Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
6dd3aa08e83b md: factor out sync completion update into helper
cb0780ad4333 md: add helper rdev_needs_recovery()
d176fadb9e78 dm raid: fix stripes adding reshape size issues
d8730f0cf4ef md: Remove deprecated CONFIG_MD_MULTIPATH
]
|
| 91/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 8545
output: 38
thoughts: 27
Thoughts: Okay, here's my attempt at summarizing those thoughts from a first-person, expert perspective, focusing on the mental process:
**Hunting Down the `md_stop` Code**
Alright, time to get to work. I need to track down all instances where the `__md_stop`, `md_stop`, or `do_md_stop` functions are being modified in the codebase. My intuition tells me this is likely the core of a critical subsystem, probably related to some kind of device or process control. Given my expertise, I suspect this has potential implications for either resource management, error handling, or perhaps a crucial shutdown or suspension mechanism. Pinpointing these commit changes will be key to understanding the recent evolution or potential regressions in this area. Time to fire up the search tools and get started!
|
| 92/2 |
2026/09/09 20:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:__md_stop PathPrefix:drivers/md/ Since:3 years]
Results: map[Output:e9b0a1556ca2 md: check mddev->pers before calling md_set_readonly()
]
|
| 93/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 8817
output: 37
thoughts: 12
Thoughts: Here's my thought process, summarized as you requested:
**Digging into Code Changes: A Quick Search**
Okay, so I need to understand the recent modifications to the `md_clean` code. My initial thought is to jump straight into a commit search. I'm going to leverage my version control system β probably Git, given the context β and formulate a query to pinpoint commits that have touched the `md_clean` file or function. I'm thinking something like a `git log -p -S md_clean` or a similar command, tailored to my specific repository structure and search options. This is a baseline approach to quickly identify the relevant changesets. From there, I'll dive deeper into the individual commit messages and diffs to get a granular understanding of the updates.
|
| 94/2 |
2026/09/09 20:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:md_clean PathPrefix:drivers/md/ Since:3 years]
Results:
|
| 95/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 9045
output: 38
thoughts: 20
Thoughts: Here's my thought process, summarized as you requested:
**Investigating Potential Reshape Implementation in the Linux MD Driver**
Alright, let's get down to brass tacks. I need to understand how reshape operations are handled within the Linux software RAID system, specifically focusing on the `md.c` driver. My initial instinct is to use `git log` to zero in on relevant commits. The term "reshape" is likely to be a key keyword for this feature, so I'll start by searching for commits directly mentioning "reshape" within that specific file: `drivers/md/md.c`. This should hopefully give me a focused history to work with and quickly get me up to speed on the design and implementation details. I'm expecting this will save me a lot of time sifting through irrelevant changes. From here I can go deeper, if necessary, exploring the commit messages, and further looking at related files.
|
| 96/2 |
2026/09/09 20:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:reshape PathPrefix:drivers/md/md.c Since:3 years]
Results: map[Output:ffd3e73d6e0c md: add helper to split bios at reshape offset
c7d34d17ea43 md: recheck spare changes before starting sync
abaf47838228 md: skip redundant raid_disks update when value is unchanged
418b3e64e445 md/raid5: Fix UAF on IO across the reshape position
cf86bb53b9c9 md: wake raid456 reshape waiters before suspend
8ff59a72478d md: move finish_reshape to md_finish_sync()
6dd3aa08e83b md: factor out sync completion update into helper
b7ee30f0efd1 md: fix sync_action incorrect display during resync
bbf2076277b1 md: factor out helpers for different sync_action in md_do_sync()
7d9f107a4e94 md: use new helpers in md_do_sync()
]
|
| 97/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 9545
output: 39
thoughts: 19
Thoughts: Okay, here's my take on those thoughts, framed as an expert's inner monologue:
**Investigating Code History for "Reshape" and State Transitions**
Alright, time to get to the bottom of this. I need to understand how the system is behaving around reshaping operations and, critically, how it handles things when a component might become inactive or needs to stop. My first thought is to zero in on the relevant code history. I'm going to leverage my version control system β probably Git, because what else would it be? β to identify every commit where "reshape" appears, *especially* if the commit also touches upon keywords like "stop," "inactive," or anything else that suggests a change in state or a deactivation process. This is the most efficient way to trace the evolution of this particular logic. I'm looking for the context in which these keywords were used. Were they added together, or separately? What was the general intent? I expect this will reveal the dependencies and the thinking behind handling these transitions. Hopefully, it'll illuminate any potential edge cases or bugs I'm dealing with.
|
| 98/2 |
2026/09/09 20:35 |
tool |
git-log |
0m
Args: map[MessageRegexps:[reshape stop] PathPrefix:drivers/md/ Since:3 years]
Results: map[Output:b094fa9d3223 md/md-llbitmap: finish reshape geometry
305a5170dc5c md/raid5: avoid BUG_ON() while continue reshape after reassembling
16c4770c75b1 dm-raid: really frozen sync_thread during suspend
ad39c08186f8 md: Don't register sync_thread for reshape directly
82ec0ae59d02 md: Make sure md_do_sync() will set MD_RECOVERY_DONE
]
|
| 99/2 |
2026/09/09 20:35 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 9975
output: 26
thoughts: 33
Thoughts: Okay, here's my interpretation of those thoughts, presented as a first-person summary, keeping in mind my expertise:
**Checking a Raid5 Reshape Patch**
Alright, let's take a look at this patch: `305a5170dc5c md/raid5: avoid BUG_ON() while continue reshape after reassembling`. I'm immediately interested because dealing with `BUG_ON()` calls in RAID5 reshaping operations can be a real headache. They typically indicate a critical internal inconsistency has been detected, and while they're intended as a safety net, they can lead to abrupt and undesirable stops during complex operations like reassembling a degraded RAID5 array after a rebuild.
My initial thought is that if this patch is addressing a situation where we're hitting a `BUG_ON()` during *continued* reshape *after* a reassembly, then we're likely dealing with a tricky race condition or an edge case within the reshaping logic that needs careful consideration. Often these kinds of bugs occur after a device has come back online and is in a certain state, so itβs likely to be a race. I need to understand what specific circumstances are triggering the error and how the patch aims to mitigate it. Is it preventing a panic situation, or just a more graceful handling of an expected, but potentially problematic state? Understanding the rationale is key before even looking at the diff. I'll need to see how the code flow is modified in the problematic path to understand the core fix. It's likely related to how the state of the reshaping is managed, how device health is checked, or how metadata is updated. Letβs dive in.
|
| 100/2 |
2026/09/09 20:36 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Jun 11 21:22:51 2024 +0800
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 013adc5ba0e1..547fd15115cd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -6254,7 +6254,9 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->reshape_backwards) {
- BUG_ON(writepos < reshape_sectors);
+ if (WARN_ON(writepos < reshape_sectors))
+ return MaxSector;
+
writepos -= reshape_sectors;
readpos += reshape_sectors;
safepos += reshape_sectors;
@@ -6272,14 +6274,18 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
* to set 'stripe_addr' which is where we will write to.
*/
if (mddev->reshape_backwards) {
- BUG_ON(conf->reshape_progress == 0);
+ if (WARN_ON(conf->reshape_progress == 0))
+ return MaxSector;
+
stripe_addr = writepos;
- BUG_ON((mddev->dev_sectors &
- ~((sector_t)reshape_sectors - 1))
- - reshape_sectors - stripe_addr
- != sector_nr);
+ if (WARN_ON((mddev->dev_sectors &
+ ~((sector_t)reshape_sectors - 1)) -
+ reshape_sectors - stripe_addr != sector_nr))
+ return MaxSector;
} else {
- BUG_ON(writepos != sector_nr + reshape_sectors);
+ if (WARN_ON(writepos != sector_nr + reshape_sectors))
+ return MaxSector;
+
stripe_addr = sector_nr;
}
]
|
| 101/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 11602
output: 55
thoughts: 187
Thoughts: **Analyzing a RAID5 Reshape Bug**
Okay, so this commit changes `BUG_ON` to `WARN_ON` and introduces a return of `MaxSector` to halt the reshape process. But, wait a second, the core of the problem *appears* to reside within `raid5_run()`. Let's take a closer look at that function, specifically the section that handles the reshape condition.
The code block in question contains this structure:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The crash stems from the `BUG_ON` check for `mddev->delta_disks` *when the reshape is not in progress*. My gut tells me this means there's a discrepancy in how `mddev->delta_disks` is being initialized or updated when no reshape is *supposed* to be happening. I need to dig deeper into the code of `raid5_run()` itself, and trace where `mddev->delta_disks` is being set and cleared. I should find out the context of `drivers/md/raid5.c`.
|
| 102/2 |
2026/09/09 20:36 |
tool |
git-log |
0m
Args: map[CodeRegexp:BUG_ON\\(mddev->delta_disks != 0\\) PathPrefix:drivers/md/raid5.c Since:3 years]
Results:
|
| 103/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 12195
output: 35
thoughts: 25
Thoughts: Here's my thought process, as requested:
**Navigating the RAID5 Code**
Okay, I need to investigate something related to non-zero `delta_disks` within the RAID5 driver. My instinct is to zero in on `drivers/md/raid5.c`. That's where the core RAID5 functionality resides, so it's the logical starting point. The specific condition `delta_disks != 0` is fairly precise. I'm guessing this refers to some change in the disk configuration or potentially some operational state that involves a difference in the disk set. I'll need to understand the context surrounding this check to figure out its meaning and impact. Let's get cracking.
|
| 104/2 |
2026/09/09 20:36 |
tool |
grepper |
0m
Args: map[Expression:delta_disks != 0 PathPrefix:drivers/md/raid5.c]
Results: map[Output:drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8116- BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
drivers/md/raid5.c:8117: BUG_ON(mddev->delta_disks != 0);
drivers/md/raid5.c-8118- }
]
|
| 105/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 12532
output: 38
thoughts: 21
Thoughts: Here's a summary of my thought process, as requested:
**Diving into the `raid5_run` History**
Okay, so I need to understand the evolution of `raid5_run` β it's crucial for my current analysis. Specifically, I want to zero in on what's been happening around line 8117. That specific point in the code likely marks a significant change, perhaps a bug fix, a performance enhancement, or the introduction of a new feature within this function. I need to understand the context of that line to see how it might fit in to the bigger picture. Understanding this history will help me discern how we got to the current state, and what the reasoning was behind any changes. I'll focus on the commits that touch that area, reading through them carefully to extract the intent and impact of each modification. I'll be looking for clues about the original design, any known issues, and the impact of the changes made over time. My goal is to reconstruct the development timeline for this particular section of code and see what insights it provides.
|
| 106/2 |
2026/09/09 20:36 |
tool |
git-blame |
0m
Args: map[End:8120 File:drivers/md/raid5.c Start:8110]
Results: map[Output:91adb56473feb 8110) }
cc6167b4f3b3c 8111) pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
91adb56473feb 8112) /* OK, we should be able to continue; */
91adb56473feb 8113) } else {
91adb56473feb 8114) BUG_ON(mddev->level != mddev->new_level);
91adb56473feb 8115) BUG_ON(mddev->layout != mddev->new_layout);
664e7c413f1e9 8116) BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
91adb56473feb 8117) BUG_ON(mddev->delta_disks != 0);
^1da177e4c3f4 8118) }
91adb56473feb 8119)
3418d036c81dc 8120) if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
]
|
| 107/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 13166
output: 31
thoughts: 98
Thoughts: **Analyzing a Potentially Troublesome Bug Fix**
Okay, so I'm looking at this proposed fix and immediately my radar is up. These `BUG_ON`s that are apparently the target of this are pretty deeply embedded β they've been around since the commit `91adb56473feb` or potentially as far back as `1da177e4c3f4`, which makes this a significant area. The user's suggesting clearing `mddev->delta_disks` and some other fields within `__md_stop()` *if* `mddev->reshape_position` is equal to `MaxSector`. That specific conditional is interesting, it's very targeted at a specific scenario. My instinct is that this *might* be masking a deeper issue, or at least a potential race condition. Before I can confidently say this is a clean fix, I need to understand *why* this specific condition is leading to the `BUG_ON`.
The real question now is: Where else is `delta_disks` being cleared? I've got to investigate the surrounding code and see if this proposed change breaks any other assumptions or introduces new side effects. I'm going to track down every instance of `delta_disks` being manipulated, understand the conditions and intent of *those* operations, and ensure that the suggested conditional logic in `__md_stop()` doesn't inadvertently introduce some hidden flaw. I'm especially keen to understand the relationship between `reshape_position` and `delta_disks` across the entire code path. This fix feels like a bandage unless I understand the systemic root cause and potential fallout.
|
| 108/2 |
2026/09/09 20:36 |
tool |
grepper |
0m
Args: map[Expression:delta_disks = 0 PathPrefix:drivers/md/]
Results: map[Output:drivers/md/dm-raid.c=725=static void rs_set_new(struct raid_set *rs)
--
drivers/md/dm-raid.c-732- mddev->raid_disks = rs->raid_disks;
drivers/md/dm-raid.c:733: mddev->delta_disks = 0;
drivers/md/dm-raid.c-734-}
--
drivers/md/dm-raid.c=736=static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type,
--
drivers/md/dm-raid.c-759- rs->raid_disks = raid_devs;
drivers/md/dm-raid.c:760: rs->delta_disks = 0;
drivers/md/dm-raid.c-761-
--
drivers/md/dm-raid.c-769- rs->md.new_layout = rs->md.layout;
drivers/md/dm-raid.c:770: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-771- rs->md.resync_offset = MaxSector;
--
drivers/md/dm-raid.c=2957=static void rs_reset_inconclusive_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2960- rs_set_cur(rs);
drivers/md/dm-raid.c:2961: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-2962- rs->md.reshape_backwards = 0;
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1520- mddev->reshape_position = MaxSector;
drivers/md/md.c:1521: mddev->delta_disks = 0;
drivers/md/md.c-1522- mddev->new_level = mddev->level;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2066- mddev->reshape_position = MaxSector;
drivers/md/md.c:2067: mddev->delta_disks = 0;
drivers/md/md.c-2068- mddev->new_level = mddev->level;
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4139- mddev->raid_disks -= mddev->delta_disks;
drivers/md/md.c:4140: mddev->delta_disks = 0;
drivers/md/md.c-4141- mddev->reshape_backwards = 0;
--
drivers/md/md.c-4160- mddev->chunk_sectors = mddev->new_chunk_sectors;
drivers/md/md.c:4161: mddev->delta_disks = 0;
drivers/md/md.c-4162- mddev->reshape_backwards = 0;
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5738- mddev->reshape_position = new;
drivers/md/md.c:5739: mddev->delta_disks = 0;
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7006- mddev->can_decrease_events = 0;
drivers/md/md.c:7007: mddev->delta_disks = 0;
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7974- mddev->new_layout = mddev->layout;
drivers/md/md.c:7975: mddev->delta_disks = 0;
drivers/md/md.c-7976- mddev->reshape_backwards = 0;
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8067- if (rv < 0) {
drivers/md/md.c:8068: mddev->delta_disks = 0;
drivers/md/md.c-8069- mddev->reshape_backwards = 0;
--
drivers/md/raid1.c=3315=static int raid1_reshape(struct mddev *mddev)
--
drivers/md/raid1.c-3398- conf->raid_disks = mddev->raid_disks = raid_disks;
drivers/md/raid1.c:3399: mddev->delta_disks = 0;
drivers/md/raid1.c-3400-
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5077- mddev->reshape_position = MaxSector;
drivers/md/raid10.c:5078: mddev->delta_disks = 0;
drivers/md/raid10.c-5079- mddev->reshape_backwards = 0;
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8842- mddev->reshape_position = MaxSector;
drivers/md/raid5.c:8843: mddev->delta_disks = 0;
drivers/md/raid5.c-8844- mddev->reshape_backwards = 0;
]
|
| 109/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 15367
output: 34
thoughts: 40
Thoughts: Here's my analysis of the provided thought process, summarized as if I were thinking it:
**Digging into `md_clean()`**
Okay, so the text is pointing me towards `md_clean()` and I'm figuring out what exactly it's doing with `delta_disks` and `reshape_backwards`. It sounds like this function has responsibility for cleaning up those structures. That makes sense, likely after a rebuild or resize operation. Now, to really understand the implications, I need to see the actual implementation. Time to crack open `drivers/md/md.c` and take a look at the code for `md_clean()`. Gotta confirm how it's clearing them, and what those cleanup mechanisms look like.
|
| 110/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 111/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 16798
output: 36
thoughts: 73
Thoughts: **Analyzing the `md_stop` Behavior in the Linux MD Driver**
Okay, so I'm seeing a potential vulnerability here in the MD driver's stop process. If the array is completely stopped, with `mode` set to zero, then the `md_clean()` function is correctly called. I've seen that code; it handles cleaning up the relevant fields, which is good. However, if the `mode` is set to two, `md_clean()` is bypassed. This bypass is what has me concerned. I need to dig into the `do_md_stop()` function within the `drivers/md/md.c` file to understand the logic and identify why this bypass is occurring and what fields are not being cleared. I need to understand if this is intentional or a potential bug that could lead to data corruption or leakage in specific scenarios. Time to dive into the code...
|
| 112/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 113/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 18254
output: 35
thoughts: 20
Thoughts: Here's a first-person summary, tailored for an expert audience, based on the provided text:
**Diving into the `md.c` Kernel Code**
Okay, so I'm looking at `drivers/md/md.c` again. Right, specifically, the `__md_stop()` function. It's that critical point where a RAID device is brought down. I need to refresh my understanding of how this handles the teardown process, especially regarding error handling and ensuring data integrity during shutdown. I'm wondering if there are any subtle race conditions or potential deadlocks in that section that could cause problems, and I will be looking out for them.
|
| 114/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 115/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 18706
output: 37
thoughts: 191
Thoughts: **Analyzing `delta_disks` Clearing in Reshape Operations**
Okay, so I need to address this bug, and the best approach is to follow established patterns. My primary concern right now is how `delta_disks` is handled during reshape operations β specifically, when and why it gets cleared. I want to leverage past solutions to similar issues.
Let's start by looking at existing code. I see that there are multiple locations where `delta_disks` is cleared when `reshape_position` equals `MaxSector`. Specifically, it appears the variable is cleared in `super_90_validate()` and `super_1_validate()` if the `MD_FEATURE_RESHAPE_ACTIVE` flag is *not* set. Then in several finish reshape functions like `raid5_finish_reshape()`, `raid10_finish_reshape()`, and `raid1_reshape()`, it's cleared when the reshape completes. Additionally, I see that this same `delta_disks` variable is cleared on error or reversion in functions like `level_store()`, `reshape_position_store()`, and `update_raid_disks()`. This gives me some understanding to compare to and use.
So, let's zoom in on `update_raid_disks()`. I'll dig into that function in `drivers/md/md.c` and see if it can give me some insight.
|
| 116/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:update_raid_disks]
Results: map[SourceCode:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
SourceFile:drivers/md/md.c]
|
| 117/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 19925
output: 36
thoughts: 379
Thoughts: **My Analysis of the `mddev->delta_disks` Issue During Array Stopping**
Okay, so let me break this down. My initial concern stems from how `update_raid_disks()` functions. Specifically, it sets `mddev->delta_disks = raid_disks - mddev->raid_disks;` and crucially, calls `mddev->pers->check_reshape(mddev)`. If `check_reshape` returns 0, indicating a successful check, `delta_disks` *remains* set. That's the key. The reshape should then begin. However, and here's the kicker, if the array is stopped *before* the reshape actually kicks off, `delta_disks` is left non-zero. That's a classic race condition and potential for a significant problem if not handled correctly.
The proposed fix makes sense. Looking at the code:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
If the `reshape_position` is `MaxSector`, indicating the reshape hasn't started, the code *explicitly* resets `delta_disks` to zero, along with other reshape parameters. This is exactly what's needed to clean up the state when a reshape is aborted before starting. It seems like a reasonable approach.
Now, the important question to fully understand this is about locking. I need to make sure that the `__md_stop()` function is properly protected. It's called from `do_md_stop()`, which is called when the array changes to the "inactive" state. So, I need to check the locking rules around `__md_stop()` and `do_md_stop()`. I will need to verify if `mddev->lock` or `mddev->reconfig_mutex` are held during the critical operations. Ensuring exclusive access to these shared resources is critical to avoid any data corruption or unexpected behavior. This is not clear from the brief and requires deeper analysis, specifically by tracing the path from `array_state_store()` where "inactive" is written to understand where those locks are taken and held.
|
| 118/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:array_state_store]
Results: map[SourceCode:4655: static ssize_t
4656: array_state_store(struct mddev *mddev, const char *buf, size_t len)
4657: {
4658: int err = 0;
4659: enum array_state st = match_word(buf, array_states);
4660:
4661: /* No lock dependent actions */
4662: switch (st) {
4663: case suspended: /* not supported yet */
4664: case write_pending: /* cannot be set */
4665: case active_idle: /* cannot be set */
4666: case broken: /* cannot be set */
4667: case bad_word:
4668: return -EINVAL;
4669: case clear:
4670: case readonly:
4671: case inactive:
4672: case read_auto:
4673: if (!mddev->pers || !md_is_rdwr(mddev))
4674: break;
4675: /* write sysfs will not open mddev and opener should be 0 */
4676: err = mddev_set_closing_and_sync_blockdev(mddev, 0);
4677: if (err)
4678: return err;
4679: break;
4680: default:
4681: break;
4682: }
4683:
4684: if (mddev->pers && (st == active || st == clean) &&
4685: mddev->ro != MD_RDONLY) {
4686: /* don't take reconfig_mutex when toggling between
4687: * clean and active
4688: */
4689: spin_lock(&mddev->lock);
4690: if (st == active) {
4691: restart_array(mddev);
4692: clear_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags);
4693: md_wakeup_thread(mddev->thread);
4694: wake_up(&mddev->sb_wait);
4695: } else /* st == clean */ {
4696: restart_array(mddev);
4697: if (!set_in_sync(mddev))
4698: err = -EBUSY;
4699: }
4700: if (!err)
4701: sysfs_notify_dirent_safe(mddev->sysfs_state);
4702: spin_unlock(&mddev->lock);
4703: return err ?: len;
4704: }
4705: err = mddev_lock(mddev);
4706: if (err)
4707: return err;
4708:
4709: switch (st) {
4710: case inactive:
4711: /* stop an active array, return 0 otherwise */
4712: if (mddev->pers)
4713: err = do_md_stop(mddev, 2);
4714: break;
4715: case clear:
4716: err = do_md_stop(mddev, 0);
4717: break;
4718: case readonly:
4719: if (mddev->pers)
4720: err = md_set_readonly(mddev);
4721: else {
4722: mddev->ro = MD_RDONLY;
4723: set_disk_ro(mddev->gendisk, 1);
4724: err = do_md_run(mddev);
4725: }
4726: break;
4727: case read_auto:
4728: if (mddev->pers) {
4729: if (md_is_rdwr(mddev))
4730: err = md_set_readonly(mddev);
4731: else if (mddev->ro == MD_RDONLY)
4732: err = restart_array(mddev);
4733: if (err == 0) {
4734: mddev->ro = MD_AUTO_READ;
4735: set_disk_ro(mddev->gendisk, 0);
4736: }
4737: } else {
4738: mddev->ro = MD_AUTO_READ;
4739: err = do_md_run(mddev);
4740: }
4741: break;
4742: case clean:
4743: if (mddev->pers) {
4744: err = restart_array(mddev);
4745: if (err)
4746: break;
4747: spin_lock(&mddev->lock);
4748: if (!set_in_sync(mddev))
4749: err = -EBUSY;
4750: spin_unlock(&mddev->lock);
4751: } else
4752: err = -EINVAL;
4753: break;
4754: case active:
4755: if (mddev->pers) {
4756: err = restart_array(mddev);
4757: if (err)
4758: break;
4759: clear_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags);
4760: wake_up(&mddev->sb_wait);
4761: err = 0;
4762: } else {
4763: mddev->ro = MD_RDWR;
4764: set_disk_ro(mddev->gendisk, 0);
4765: err = do_md_run(mddev);
4766: }
4767: break;
4768: default:
4769: err = -EINVAL;
4770: break;
4771: }
4772:
4773: if (!err) {
4774: if (mddev->hold_active == UNTIL_IOCTL)
4775: mddev->hold_active = 0;
4776: sysfs_notify_dirent_safe(mddev->sysfs_state);
4777: }
4778: mddev_unlock(mddev);
4779:
4780: if (st == readonly || st == read_auto || st == inactive ||
4781: (err && st == clear))
4782: clear_bit(MD_CLOSING, &mddev->flags);
4783:
4784: return err ?: len;
4785: }
SourceFile:drivers/md/md.c]
|
| 119/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 22751
output: 52
thoughts: 85
Thoughts: **Analyzing the Stop Function and its Concurrency Implications**
Okay, so I'm looking at this code and specifically, the relationship between `mddev_lock()` and `__md_stop()`. I see that `mddev_lock(mddev)` is called *before* `do_md_stop(mddev, 2)`. That immediately flags something interesting. `mddev_lock()` is going to acquire the `mddev->reconfig_mutex`. That means, as I understand it, `__md_stop()` is going to be invoked *with* that `reconfig_mutex` held. This has some very important concurrency implications that I need to keep in mind regarding any potential race conditions and deadlocks that are possible.
Now, to fully understand the landscape here, I really need to broaden my perspective. I need to make sure I know how this function is used elsewhere, and if other locking strategies are used. So, I need to check and make sure that this is the only place `__md_stop()` is called. Are there other paths that might lead to `__md_stop()`? I need to review the call sites to make sure I understand the full context.
|
| 120/2 |
2026/09/09 20:36 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:0 Name:__md_stop SourceTreePrefix:drivers/md/]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7193] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:md_stop SourceFile:drivers/md/md.c SourceLine:7108]] TruncatedOutput:false]
|
| 121/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 23258
output: 34
thoughts: 14
Thoughts: Here's my understanding of the thought process:
**Direct Method Calls**
Okay, so I'm seeing that the `md_stop()` function actually relies on another function, `__md_stop()`. That means `md_stop()` likely serves as a public-facing interface, possibly for stopping a process or module, while `__md_stop()` does the underlying work. This is a common design pattern. My guess is, `md_stop()` might handle things like error checking, resource cleanup, or maybe logging before calling the internal, private function `__md_stop()` which actually executes the stop action. The double underscores on `__md_stop()` suggest that it's meant to be an internal, private function. I'll need to dig deeper into the code to understand the nuances of the interaction. I wonder if there is an important reason for the two calls?
|
| 122/2 |
2026/09/09 20:36 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_stop]
Results: map[SourceCode:7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
SourceFile:drivers/md/md.c]
|
| 123/2 |
2026/09/09 20:36 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 23659
output: 40
thoughts: 50
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Analyzing `__md_stop()` and Reshape Parameters**
Alright, so the key takeaway is that `__md_stop()` consistently locks `mddev->reconfig_mutex` when it's called. This is something I need to keep in mind; the mutex guarantees a level of protection around this function. Given the reliance on that mutex, I want to drill down further into understanding its behavior.
My immediate thought is to delve deeper into reshape parameters and potential issues around `reshape_position == MaxSector`. I'm going to start by scrutinizing commit history. I'll search for any patches that specifically address clearing these parameters or resolve bugs related to reshaping, especially those tied to that specific position. Understanding how those bugs were introduced and subsequently corrected will be crucial. This targeted search is the best way to develop my understanding of any latent interactions.
|
| 124/2 |
2026/09/09 20:37 |
tool |
git-log |
0m
Args: map[CodeRegexp:reshape_position == MaxSector PathPrefix:drivers/md/ Since:3 years]
Results: map[Output:c7d34d17ea43 md: recheck spare changes before starting sync
207c5656c33d md: factor out helper to start reshape from action_store()
503f9d43790f md: add a new helper reshape_interrupted()
9e46c70e829b md: Don't suspend the array for interrupted reshape
]
|
| 125/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 24051
output: 27
thoughts: 31
Thoughts: Okay, here's my take on those thoughts, framed as my own:
**Refactoring the Reshape Process**
Alright, I'm taking a look at that commit, `207c5656c33d`. The description says "md: factor out helper to start reshape from action_store()". Immediately, I'm thinking, "Good, sounds like we're improving the architecture." It's likely that the current implementation has the reshape logic too tightly coupled with the `action_store()` function. That's a classic code smell.
By "factoring out a helper," I'm expecting to see a dedicated function or class created to handle the intricacies of initiating the reshape process. This is good modularity, which is essential to good code architecture. It will likely make things more readable, testable, and maintainable. This also opens opportunities to use the helper elsewhere, maybe in related areas. I'm curious to see how they've chosen to abstract the reshape initiation. What input parameters does the helper expect? How will it interact with the action store? I'm already imagining some of the trade-offs: will this simplify the `action_store()` logic significantly, or will it create unnecessary overhead? I hope the abstraction is thoughtfully done.
|
| 126/2 |
2026/09/09 20:37 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 207c5656c33d56b3759d0876b68fa56cb56e5c51
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Jun 11 21:22:43 2024 +0800
md: factor out helper to start reshape from action_store()
There are no functional changes, just to make code cleaner and prepare
for following refactor.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-5-yukuai1@huaweicloud.com
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4ce8d164cde9..b34ae9fbd246 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5071,6 +5071,45 @@ static void frozen_sync_thread(struct mddev *mddev)
mutex_unlock(&mddev->sync_mutex);
}
+static int mddev_start_reshape(struct mddev *mddev)
+{
+ int ret;
+
+ if (mddev->pers->start_reshape == NULL)
+ return -EINVAL;
+
+ ret = mddev_lock(mddev);
+ if (ret)
+ return ret;
+
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
+ mddev_unlock(mddev);
+ return -EBUSY;
+ }
+
+ if (mddev->reshape_position == MaxSector ||
+ mddev->pers->check_reshape == NULL ||
+ mddev->pers->check_reshape(mddev)) {
+ clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ ret = mddev->pers->start_reshape(mddev);
+ if (ret) {
+ mddev_unlock(mddev);
+ return ret;
+ }
+ } else {
+ /*
+ * If reshape is still in progress, and md_check_recovery() can
+ * continue to reshape, don't restart reshape because data can
+ * be corrupted for raid456.
+ */
+ clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ }
+
+ mddev_unlock(mddev);
+ sysfs_notify_dirent_safe(mddev->sysfs_degraded);
+ return 0;
+}
+
static ssize_t
action_store(struct mddev *mddev, const char *page, size_t len)
{
@@ -5090,32 +5129,10 @@ action_store(struct mddev *mddev, const char *page, size_t len)
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (cmd_match(page, "reshape")) {
- int err;
- if (mddev->pers->start_reshape == NULL)
- return -EINVAL;
- err = mddev_lock(mddev);
- if (!err) {
- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
- err = -EBUSY;
- } else if (mddev->reshape_position == MaxSector ||
- mddev->pers->check_reshape == NULL ||
- mddev->pers->check_reshape(mddev)) {
- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- err = mddev->pers->start_reshape(mddev);
- } else {
- /*
- * If reshape is still in progress, and
- * md_check_recovery() can continue to reshape,
- * don't restart reshape because data can be
- * corrupted for raid456.
- */
- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- }
- mddev_unlock(mddev);
- }
+ int err = mddev_start_reshape(mddev);
+
if (err)
return err;
- sysfs_notify_dirent_safe(mddev->sysfs_degraded);
} else {
if (cmd_match(page, "check"))
set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
]
|
| 127/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 25616
output: 26
thoughts: 26
Thoughts: Okay, let's dive into this. Here's my take on those thoughts, as if they're my own:
**Analyzing the Pending Synchronization Task**
Alright, before I kick off this sync, I need to make absolutely sure everything's buttoned up. Let's start by cross-referencing that commit hash, `c7d34d17ea43`. That's a critical commit; it flags the need for a re-evaluation of 'spare changes' before the data synchronization can begin. I need to make sure I understand the scope of those "spare changes" within the context of the larger sync operation. Are we talking about orphaned records, modifications to metadata, perhaps some index optimization? I want to make certain that any recent, possibly undocumented, alterations or edits are fully understood before hitting that "go" button. If not I might see some major problems. Got to make sure everything lines up, or Iβm going to have a nightmare on my hands. Time to dig in!
|
| 128/2 |
2026/09/09 20:37 |
tool |
git-show |
0m
Args:
Results: map[Output:commit c7d34d17ea43ebc86b45d439ebb435e11ca44bca
Author: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Date: Wed Jul 8 11:20:03 2026 +0000
md: recheck spare changes before starting sync
remove_spares() and remove_and_add_spares() modify the array's rdev
configuration. These operations are only safe after the array has been
suspended.
md_start_sync() checks whether spare configuration changes are needed
before taking reconfig_mutex. However, the rdev state can change before
the mutex is acquired, so the initial check can become stale. In that
case, md_choose_sync_action() may remove or replace rdevs while normal
I/O is still accessing them.
The race can occur as follows:
raid10d Worker Normal IO
____________ _______________________ ______________________
raid10_write_request()
wait_blocked_dev()
set Blocked
set Faulty
Skip Faulty rdev
rrdev->nr_pending++
.repl_bio = bio
removeable_rdev = false .
array not suspended .
lock mddev goto err_handle
lock mddev (wait)
.
update sb .
clear Blocked .
.
unlock mddev .
lock mddev (acquires)
remove_spares()
removeable_rdev = true
raid10_remove_disk()
rdev = replacement
replacement = NULL
rdev_dec_pending(NULL)
unlock mddev (NULL)->nr_pending--
In this case, rdev_dec_pending() is called with a NULL pointer,
resulting in a NULL pointer dereference when attempting to decrement
nr_pending.
Fix this by suspending the array when spare configuration changes are
needed, including for non-read-write arrays, and checking again after
taking reconfig_mutex. If the array was not already suspended and a
change is now needed, release the mutex, suspend the array, and
reacquire the mutex before continuing.
Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260628142420.1051027-1-abd.masalkhi@gmail.com?part=3
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260708112003.474537-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 997c26568b9e..dc848a24f592 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -10179,13 +10179,25 @@ static void md_start_sync(struct work_struct *ws)
* If reshape is still in progress, spares won't be added or removed
* from conf until reshape is done.
*/
- if (mddev->reshape_position == MaxSector &&
+ if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
md_spares_need_change(mddev)) {
suspend = true;
mddev_suspend(mddev, false);
}
mddev_lock_nointr(mddev);
+
+ /*
+ * The spare configuration can change before reconfig_mutex is acquired.
+ * Recheck while holding the lock and suspend if needed.
+ */
+ if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
+ md_spares_need_change(mddev)) {
+ mddev_unlock(mddev);
+ mddev_suspend_and_lock_nointr(mddev);
+ suspend = true;
+ }
+
if (!md_is_rdwr(mddev)) {
/*
* On a read-only array we can:
]
|
| 129/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 27102
output: 36
thoughts: 494
Thoughts: **Analyzing the MD Driver's Reshape Termination**
Okay, so this patch aims to clean up some reshape-related variables within the `__md_stop` function. My initial thought is to verify that this is the correct place to do this, and to make sure this is consistent with the rest of the code. The patch specifically clears `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` when `mddev->reshape_position` equals `MaxSector`. That makes sense - `MaxSector` seems to be the indicator that reshape is not actively in progress.
I need to confirm that `mddev->reshape_position == MaxSector` is indeed the *standard* way to determine when reshape is finished. I'll need to double-check that this idiom is consistently used throughout the MD driver code.
Looking at the code, I see that `delta_disks` is also cleared in `super_1_validate()`, `super_90_validate()`, and `md_clean()`. That's a good sanity check; it reinforces that cleaning this up is a reasonable approach. I'll need to check the exact conditions in those functions to make sure the logic aligns with this patch.
However, a closer look at `md_clean()` reveals a potential issue. `md_clean()` sets `mddev->new_level` to `LEVEL_NONE`, but this patch sets it to `mddev->level`. This is concerning, as it suggests the patch is deviating from the established practice. I need to understand why this difference exists. Is the patch trying to preserve the "old" level, which is a key part of the level, or is this a subtle bug? I must dig deeper into the logic of `super_1_validate()` and `super_90_validate()` to see if they shed any light on the intention behind the `LEVEL_NONE` assignment in `md_clean()`. I need to ensure that this patch doesn't introduce any regressions or unintended consequences related to the RAID level.
|
| 130/2 |
2026/09/09 20:37 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:super_1_validate]
Results: map[SourceCode:1993: static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
1994: {
1995: struct mdp_superblock_1 *sb = page_address(rdev->sb_page);
1996: __u64 ev1 = le64_to_cpu(sb->events);
1997: int role;
1998:
1999: rdev->raid_disk = -1;
2000: clear_bit(Faulty, &rdev->flags);
2001: clear_bit(In_sync, &rdev->flags);
2002: clear_bit(Bitmap_sync, &rdev->flags);
2003: clear_bit(WriteMostly, &rdev->flags);
2004:
2005: if (mddev->raid_disks == 0) {
2006: mddev->major_version = 1;
2007: mddev->patch_version = 0;
2008: mddev->external = 0;
2009: mddev->chunk_sectors = le32_to_cpu(sb->chunksize);
2010: mddev->ctime = le64_to_cpu(sb->ctime);
2011: mddev->utime = le64_to_cpu(sb->utime);
2012: mddev->level = le32_to_cpu(sb->level);
2013: mddev->clevel[0] = 0;
2014: mddev->layout = le32_to_cpu(sb->layout);
2015: mddev->raid_disks = le32_to_cpu(sb->raid_disks);
2016: mddev->dev_sectors = le64_to_cpu(sb->size);
2017: mddev->events = ev1;
2018: mddev->bitmap_info.offset = 0;
2019: mddev->bitmap_info.space = 0;
2020: /* Default location for bitmap is 1K after superblock
2021: * using 3K - total of 4K
2022: */
2023: mddev->bitmap_info.default_offset = 1024 >> 9;
2024: mddev->bitmap_info.default_space = (4096-1024) >> 9;
2025: mddev->reshape_backwards = 0;
2026:
2027: mddev->resync_offset = le64_to_cpu(sb->resync_offset);
2028: memcpy(mddev->uuid, sb->set_uuid, 16);
2029:
2030: mddev->max_disks = (4096-256)/2;
2031:
2032: if (!mddev->logical_block_size)
2033: mddev->logical_block_size = le32_to_cpu(sb->logical_block_size);
2034:
2035: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET) &&
2036: mddev->bitmap_info.file == NULL) {
2037: mddev->bitmap_info.offset =
2038: (__s32)le32_to_cpu(sb->bitmap_offset);
2039: /* Metadata doesn't record how much space is available.
2040: * For 1.0, we assume we can use up to the superblock
2041: * if before, else to 4K beyond superblock.
2042: * For others, assume no change is possible.
2043: */
2044: if (mddev->minor_version > 0)
2045: mddev->bitmap_info.space = 0;
2046: else if (mddev->bitmap_info.offset > 0)
2047: mddev->bitmap_info.space =
2048: 8 - mddev->bitmap_info.offset;
2049: else
2050: mddev->bitmap_info.space =
2051: -mddev->bitmap_info.offset;
2052: }
2053:
2054: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2057: mddev->new_level = le32_to_cpu(sb->new_level);
2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
2063: & MD_FEATURE_RESHAPE_BACKWARDS)))
2064: mddev->reshape_backwards = 1;
2065: } else {
2066: mddev->reshape_position = MaxSector;
2067: mddev->delta_disks = 0;
2068: mddev->new_level = mddev->level;
2069: mddev->new_layout = mddev->layout;
2070: mddev->new_chunk_sectors = mddev->chunk_sectors;
2071: }
2072:
2073: if (mddev->level == 0 &&
2074: !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT))
2075: mddev->layout = -1;
2076:
2077: if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL)
2078: set_bit(MD_HAS_JOURNAL, &mddev->flags);
2079:
2080: if (le32_to_cpu(sb->feature_map) &
2081: (MD_FEATURE_PPL | MD_FEATURE_MULTIPLE_PPLS)) {
2082: if (le32_to_cpu(sb->feature_map) &
2083: (MD_FEATURE_BITMAP_OFFSET | MD_FEATURE_JOURNAL))
2084: return -EINVAL;
2085: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_PPL) &&
2086: (le32_to_cpu(sb->feature_map) &
2087: MD_FEATURE_MULTIPLE_PPLS))
2088: return -EINVAL;
2089: set_bit(MD_HAS_PPL, &mddev->flags);
2090: }
2091: } else if (mddev->pers == NULL) {
2092: /* Insist of good event counter while assembling, except for
2093: * spares (which don't need an event count).
2094: * Similar to mdadm, we allow event counter difference of 1
2095: * from the freshest device.
2096: */
2097: if (rdev->desc_nr >= 0 &&
2098: rdev->desc_nr < le32_to_cpu(sb->max_dev) &&
2099: (le16_to_cpu(sb->dev_roles[rdev->desc_nr]) < MD_DISK_ROLE_MAX ||
2100: le16_to_cpu(sb->dev_roles[rdev->desc_nr]) == MD_DISK_ROLE_JOURNAL))
2101: if (ev1 + 1 < mddev->events)
2102: return -EINVAL;
2103: } else if (mddev->bitmap) {
2104: /* If adding to array with a bitmap, then we can accept an
2105: * older device, but not too old.
2106: */
2107: if (ev1 < md_bitmap_events_cleared(mddev))
2108: return 0;
2109: if (ev1 < mddev->events)
2110: set_bit(Bitmap_sync, &rdev->flags);
2111: } else {
2112: if (ev1 < mddev->events)
2113: /* just a hot-add of a new device, leave raid_disk at -1 */
2114: return 0;
2115: }
2116:
2117: if (rdev->desc_nr < 0 ||
2118: rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
2119: role = MD_DISK_ROLE_SPARE;
2120: rdev->desc_nr = -1;
2121: } else if (mddev->pers == NULL && freshest && ev1 < mddev->events) {
2122: /*
2123: * If we are assembling, and our event counter is smaller than the
2124: * highest event counter, we cannot trust our superblock about the role.
2125: * It could happen that our rdev was marked as Faulty, and all other
2126: * superblocks were updated with +1 event counter.
2127: * Then, before the next superblock update, which typically happens when
2128: * remove_and_add_spares() removes the device from the array, there was
2129: * a crash or reboot.
2130: * If we allow current rdev without consulting the freshest superblock,
2131: * we could cause data corruption.
2132: * Note that in this case our event counter is smaller by 1 than the
2133: * highest, otherwise, this rdev would not be allowed into array;
2134: * both kernel and mdadm allow event counter difference of 1.
2135: */
2136: struct mdp_superblock_1 *freshest_sb = page_address(freshest->sb_page);
2137: u32 freshest_max_dev = le32_to_cpu(freshest_sb->max_dev);
2138:
2139: if (rdev->desc_nr >= freshest_max_dev) {
2140: /* this is unexpected, better not proceed */
2141: pr_warn("md: %s: rdev[%pg]: desc_nr(%d) >= freshest(%pg)->sb->max_dev(%u)\n",
2142: mdname(mddev), rdev->bdev, rdev->desc_nr,
2143: freshest->bdev, freshest_max_dev);
2144: return -EUCLEAN;
2145: }
2146:
2147: role = le16_to_cpu(freshest_sb->dev_roles[rdev->desc_nr]);
2148: pr_debug("md: %s: rdev[%pg]: role=%d(0x%x) according to freshest %pg\n",
2149: mdname(mddev), rdev->bdev, role, role, freshest->bdev);
2150: } else {
2151: role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
2152: }
2153: switch (role) {
2154: case MD_DISK_ROLE_SPARE: /* spare */
2155: break;
2156: case MD_DISK_ROLE_FAULTY: /* faulty */
2157: set_bit(Faulty, &rdev->flags);
2158: break;
2159: case MD_DISK_ROLE_JOURNAL: /* journal device */
2160: if (!(le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL)) {
2161: /* journal device without journal feature */
2162: pr_warn("md: journal device provided without journal feature, ignoring the device\n");
2163: return -EINVAL;
2164: }
2165: set_bit(Journal, &rdev->flags);
2166: rdev->journal_tail = le64_to_cpu(sb->journal_tail);
2167: rdev->raid_disk = 0;
2168: break;
2169: default:
2170: rdev->saved_raid_disk = role;
2171: if ((le32_to_cpu(sb->feature_map) &
2172: MD_FEATURE_RECOVERY_OFFSET)) {
2173: rdev->recovery_offset = le64_to_cpu(sb->recovery_offset);
2174: if (!(le32_to_cpu(sb->feature_map) &
2175: MD_FEATURE_RECOVERY_BITMAP))
2176: rdev->saved_raid_disk = -1;
2177: } else {
2178: /*
2179: * If the array is FROZEN, then the device can't
2180: * be in_sync with rest of array.
2181: */
2182: if (!test_bit(MD_RECOVERY_FROZEN,
2183: &mddev->recovery))
2184: set_bit(In_sync, &rdev->flags);
2185: }
2186: rdev->raid_disk = role;
2187: break;
2188: }
2189: if (sb->devflags & WriteMostly1)
2190: set_bit(WriteMostly, &rdev->flags);
2191: if (sb->devflags & FailFast1)
2192: set_bit(FailFast, &rdev->flags);
2193: if (le32_to_cpu(sb->feature_map) & MD_FEATURE_REPLACEMENT)
2194: set_bit(Replacement, &rdev->flags);
2195:
2196: return 0;
2197: }
SourceFile:drivers/md/md.c]
|
| 131/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 32000
output: 34
thoughts: 968
Thoughts: **Summary of Reshape Parameter Reset Idioms and Locking Considerations**
Okay, so I've been digging into this and need to make sure I understand the standard practices here for resetting reshape parameters and what the common locking idioms are. The key is to ensure the array state is consistent, especially when a reshape is aborted or completed.
First, checking if a reshape is active. It's clear that the typical idiom to check if a reshape is *not* in progress is `mddev->reshape_position == MaxSector`. This is the signal. If it *does* equal MaxSector, then we know we're not currently reshaping.
Second, the standard way to clear the reshape parameters when a reshape is aborted, finished, or is otherwise inactive is pretty well-established. It boils down to this:
* `mddev->delta_disks = 0;` (This is crucial, seems like a primary indicator)
* `mddev->reshape_backwards = 0;`
* `mddev->new_level = mddev->level;` (or `LEVEL_NONE` if clearing all array state)
* `mddev->new_layout = mddev->layout;`
* `mddev->new_chunk_sectors = mddev->chunk_sectors;`
This pattern appears in places like `super_1_validate`, `super_90_validate`, `md_clean`, various error paths of `update_raid_disks`, and `raid5_finish_reshape`. We are resetting those parameters in our proposed fix.
Third, regarding locking, and this is important for the consistency of the state updates. The function `__md_stop()` is called from both `do_md_stop()` and `md_stop()`. Both callers have acquired the `mddev->reconfig_mutex` (via `mddev_lock()`). This means that any modifications to `mddev` fields *within* `__md_stop()` are inherently protected by that mutex. There's no need for any additional locking within `__md_stop()` itself to guard these state resets. That simplifies things, but is also *very* important to get right.
I've looked at a few relevant past fixes, and there are some clear parallels:
* `305a5170dc5c md/raid5: avoid BUG_ON() while continue reshape after reassembling`. This one's important, as it deals with a reverted reshape leaving stale state. The solution converted a `BUG_ON()` to `WARN_ON()` and gracefully aborted by returning `MaxSector`. It seems we are doing the same in our fix. The root cause was `update_raid_disks` and that our code may fail, so the array is left in an inconsistent state.
* `c7d34d17ea43 md: recheck spare changes before starting sync`. This addresses a race condition. It highlights the importance of checking `mddev->reshape_position == MaxSector` under the protection of `reconfig_mutex`. We have ensured our state is properly locked.
* `207c5656c33d md: factor out helper to start reshape from action_store()`. This commit shows how `mddev->reshape_position == MaxSector` is used to determine if reshape can be started.
Analyzing `305a5170dc5c` further, the problem stemmed from `--revert-reshape` updating `raid_disks` while `reshape_position` was still set. After reassembling, `reshape_position` was read from the superblock. During the reshape, the check on `writepos` (calculated from the *old* `reshape_position`) failed. Our fix is designed to reset the stale reshape data on stop which is what `305a5170dc5c` recommends.
`update_raid_disks()` also seems relevant. If it succeeds, it leaves `delta_disks` set, which is one of the important parameters we are resetting. If the array is then stopped before reshape begins, then our fix should ensure `__md_stop()` clears these parameters, if reshape has not been started.
I've also checked `md_stop()` (called from dm-raid) and confirmed that it also calls `__md_stop()`, ensuring all cases are handled.
|
| 132/2 |
2026/09/09 20:37 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_stop]
Results: map[SourceCode:7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
SourceFile:drivers/md/md.c]
|
| 133/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 34113
output: 53
thoughts: 252
Thoughts: **Analyzing the Locking and Synchronization in the MD Layer**
Okay, so `md_stop()` *does* assert that `reconfig_mutex` is held. That's good; it's the expected behavior. And, looking at the call stack, `do_md_stop()` is definitely called with that mutex already locked, thanks to `mddev_lock()`. The locking rule seems straightforward: if you're touching these sensitive fields, you *must* have `reconfig_mutex`. We're good there; the code path into `__md_stop()` honors that.
Now, I'm thinking about concurrent modifications to `mddev->reshape_position`. It's normally protected by `reconfig_mutex`, which is what I'd expect for major state changes. But during a reshape, the sync thread *could* potentially update it. Let me think... wait, the key is that when `__md_stop()` is executed, the sync thread *should* already be stopped. That `stop_sync_thread()` function... where is that called, again? Oh, it's called within `do_md_stop()`, before `__md_stop()`, so that's consistent.
But, back up! Where does `md_stop()` itself get called? We're dealing with `dm-raid` here, so I'd better double-check the `dm-raid.c` code. Looks like `md_stop()` is called in `raid_dtr()` and `raid_postsuspend()`. So I need to verify that `stop_sync_thread()` is called before `md_stop()` is called from those functions. That's the critical piece of the puzzle to ensure data integrity during a device teardown or suspend.
|
| 134/2 |
2026/09/09 20:37 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/dm-raid.c IncludeSnippetLines:5 Name:md_stop SourceTreePrefix:drivers/md/]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:raid_ctr SourceFile:drivers/md/dm-raid.c SourceLine:3319 SourceSnippet:3314:
3315: mddev_unlock(&rs->md);
3316: return 0;
3317:
3318: bad_unlock:
3319: md_stop(&rs->md);
3320: mddev_unlock(&rs->md);
3321: bad:
3322: raid_set_free(rs);
3323:
3324: return r;
] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:raid_dtr SourceFile:drivers/md/dm-raid.c SourceLine:3332 SourceSnippet:3327: static void raid_dtr(struct dm_target *ti)
3328: {
3329: struct raid_set *rs = ti->private;
3330:
3331: mddev_lock_nointr(&rs->md);
3332: md_stop(&rs->md);
3333: rs->md.dm_gendisk = NULL;
3334: mddev_unlock(&rs->md);
3335:
3336: if (work_pending(&rs->md.event_work))
3337: flush_work(&rs->md.event_work);
] map[ReferenceKind:takes-address-of ReferencingEntityKind:global_variable ReferencingEntityName:__UNIQUE_ID_addressable_md_stop_1372 SourceFile:drivers/md/md.c SourceLine:7111 SourceSnippet:7111: EXPORT_SYMBOL_GPL(md_stop);
] map[ReferenceKind:takes-address-of ReferencingEntityKind:global_variable ReferencingEntityName:__gendwarfksyms_ptr_md_stop SourceFile:drivers/md/md.c SourceLine:7111 SourceSnippet:7111: EXPORT_SYMBOL_GPL(md_stop);
] map[ReferenceKind:takes-address-of ReferencingEntityKind:global_variable ReferencingEntityName:__gendwarfksyms_ptr_md_stop SourceFile:drivers/md/md.c SourceLine:7111 SourceSnippet:7111: EXPORT_SYMBOL_GPL(md_stop);
]] TruncatedOutput:false]
|
| 135/2 |
2026/09/09 20:37 |
llm |
history-explorer |
0m
Model:
Tokens:
input: 35489
output: 842
thoughts: 867
Thoughts: **My Analysis of the Proposed Fix**
Okay, let's break this down. First off, thinking about how `raid_dtr()` and `raid_ctr()` interact with `md_stop()` and ultimately `__md_stop()`, it's clear the sync thread is either stopped or not running when `__md_stop()` gets called. That simplifies things, which is good.
Now, going into the specific points raised:
1. **Idioms and Common Patterns:** This resonates strongly. The `mddev->reshape_position == MaxSector` check is *the* standard way to determine a reshape isn't active. I've seen it repeatedly. And the clearing of reshape parameters when a reshape is aborted or inactive, that's spot on. The pattern in `super_1_validate()` and `super_90_validate()` with that exact reset of fields... my proposed change does follow that established idiom perfectly, and thatβs important for maintainability and consistency.
2. **Locking Rules:** Excellent. Understanding that `mddev->reconfig_mutex` protects the `mddev` fields is fundamental. The fact that `__md_stop()` is always called *with* this mutex already held, whether through `do_md_stop()` or `md_stop()`, confirms that the proposed changes are thread-safe. I remember explicitly checking that `lockdep_assert_held` in `md_stop()`! And the guarantee that the sync thread is stopped beforehand means no races on those fields. This is critical. No additional locking required means clean, concise code β and avoids potential deadlocks.
3. **Relevant Past Fixes:** The recent commit addressing the `BUG_ON()` in reshape handling is very relevant. It demonstrates a conscious shift towards more robust error handling and, importantly, avoiding kernel panics by handling stale state. This aligns directly with the goal to gracefully handle the situation and prevent future panics. And the other commit about rechecking spare changes under the mutex... Yes, my fix is perfectly consistent with that locking principle since it's operating safely within the context of the already held reconfig mutex.
**In conclusion, my proposed fix is solid. It adheres to all established idioms, locking rules, and aligns with the direction of recent changes in the MD subsystem. It's safe, correct, and maintains the consistent approach weβve come to rely on in the MD core. I'm confident this will address the issue without introducing any new problems.**
|
| 136/1 |
2026/09/09 20:37 |
action |
kernel-scratch-checkouter |
0m
Results: map[KernelScratchSrc:/app/workdir/cache/tmp/tmp439474398]
|
| 137/1 |
2026/09/09 20:38 |
loop |
|
41m
|
| 138/2 |
2026/09/09 20:38 |
iteration |
0 |
41m
|
| 139/3 |
2026/09/09 20:38 |
agent |
patch-generator |
6m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with creating a fix for a kernel bug.
You will be given a crash report, an initial explanation of the root cause done by another
kernel expert, and a summary of how similar bugs were fixed in the past.
Use the codeeditor tool to do code edits.
Note: you will not see your changes when looking at the code using codesearch tools.
Use the patch-diff tool to review the modifications you applied.
Your final reply should contain explanation of what you did in the patch and why
(details not present in the initial explanation of the bug).
Your fix must not just prevent the given crash, but also be the best fix for the underlying
root cause from the software engineering point of view. There can be several ways to fix the
same bug. Consider alternatives, and pick the best one. For example, additional checks may be
added at different locations/functions, it's usually better to place them earlier in the
execution to avoid multiple checks at various locations later.
Frequently the same coding mistake is done in several locations in the source code.
Check if your fix should be extended/applied to similar cases around to fix other similar bugs.
But don't go too wide, don't try to fix problems kernel-wide, fix similar issues
in the same file only.
If you are changing post-conditions of a function, consider all callers of the functions,
and if they need to be updated to handle new post-conditions. For example, if you make
a function that previously never returned a NULL, return NULL, consider if callers
need to be updated to handle NULL return value.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash that corresponds to the bug is:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The explanation of the root cause of the bug is:
An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
Historical context on how similar bugs were fixed in the past:
Based on an analysis of the MD subsystem's history and source code, your proposed fix perfectly aligns with the established idioms, locking rules, and common patterns used by kernel developers to address similar issues.
Here is a summary of the findings:
### 1. Idioms and Common Patterns
* **Checking Reshape Status:** The standard idiom to determine if a reshape is *not* currently active or in progress is checking `mddev->reshape_position == MaxSector`. This is used extensively throughout the MD core (e.g., in `super_1_validate()`, `super_90_validate()`, `md_start_sync()`, and `mddev_start_reshape()`).
* **Clearing Reshape State:** When a reshape is aborted, finished, or found to be inactive, the standard pattern is to reset the pending reshape parameters to their current/default values. Your proposed fix mirrors the exact logic used in `super_1_validate()` and `super_90_validate()` when the `MD_FEATURE_RESHAPE_ACTIVE` flag is not set:
```c
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
Applying this same reset logic in `__md_stop()` when `reshape_position == MaxSector` is the correct and idiomatic way to clean up stale in-memory state.
### 2. Locking Rules
* Modifying `mddev` fields like `delta_disks` and `new_level` must be done while holding the `mddev->reconfig_mutex`.
* `__md_stop()` is called from two places: `do_md_stop()` and `md_stop()`. In both cases, the caller is strictly required to hold `mddev->reconfig_mutex` (acquired via `mddev_lock()` or `mddev_lock_nointr()`). In fact, `md_stop()` explicitly contains `lockdep_assert_held(&mddev->reconfig_mutex);`.
* Additionally, the sync thread is guaranteed to be stopped before `__md_stop()` is invoked (e.g., `stop_sync_thread()` is called earlier in `do_md_stop()`).
* **Conclusion on Locking:** Modifying these fields directly inside `__md_stop()` is completely safe, race-free, and requires no additional locking.
### 3. Relevant Past Fixes
* **Commit `305a5170dc5c` ("md/raid5: avoid BUG_ON() while continue reshape after reassembling")**: This recent commit (June 2024) addressed a highly similar issue where a reverted reshape (using `mdadm --revert-reshape`) left stale state that triggered a `BUG_ON()` in `reshape_request()`. The fix involved gracefully handling the stale state by converting the `BUG_ON()` to a `WARN_ON()` and returning `MaxSector` to abort the reshape. This demonstrates a recent focus on making the reshape code more robust against stale state and avoiding kernel panics.
* **Commit `c7d34d17ea43` ("md: recheck spare changes before starting sync")**: This commit highlights the importance of checking `mddev->reshape_position == MaxSector` strictly under the `reconfig_mutex` to avoid race conditions with array state changes. Since your fix is inside `__md_stop()` where the mutex is already held, it adheres perfectly to this principle.
**Summary:** Your proposed fix is structurally sound, safe, and follows the exact conventions used by the MD subsystem for cleaning up aborted or inactive reshapes.
Reply: An issue was discovered in the MD subsystem where stopping an active MD array prior to starting a configured reshape operation left stale reshape parameters stored in memory on the `struct mddev`.
### Root Cause
1. When a reshape is initiated (for example, by modifying `raid_disks` via sysfs), `update_raid_disks()` sets `mddev->delta_disks`, `mddev->reshape_backwards`, and potentially other reshape parameters (`new_layout`, `new_chunk_sectors`, `new_level`). At this point, the reshape has not yet started running, so `mddev->reshape_position` remains set to `MaxSector`.
2. If userspace deactivates or stops the array before the reshape begins (e.g., writing `"inactive"` to `array_state`), `do_md_stop(mddev, 2)` calls `__md_stop(mddev)`.
3. `__md_stop(mddev)` detaches the personality (`mddev->pers = NULL`) and frees `mddev->private`, but did not reset the in-memory reshape fields when no reshape was in progress. Note that in a full stop/disassembly (`mode == 0`), `md_clean(mddev)` is called which clears these fields, but deactivation (`mode == 2`) bypasses `md_clean()`.
4. When the array is later restarted (e.g. `array_state = "active"` -> `md_run()`), the personality's run method (`raid5_run()`) inspects `mddev->reshape_position`. Because `reshape_position == MaxSector`, it enters the non-reshape branch where it asserts that no reshape parameters are pending:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
The stale `delta_disks` (and/or other pending attributes) triggered the `BUG_ON()` kernel panic.
### Fix
In `drivers/md/md.c`, update `__md_stop(struct mddev *mddev)` to check whether a reshape was active (`mddev->reshape_position == MaxSector`). If no reshape was actively running, reset the pending parameters back to their current array configuration and default values:
- `mddev->delta_disks = 0;`
- `mddev->reshape_backwards = 0;`
- `mddev->new_level = mddev->level;`
- `mddev->new_layout = mddev->layout;`
- `mddev->new_chunk_sectors = mddev->chunk_sectors;`
This reset mirrors the established conventions used in `super_1_validate()`, `super_90_validate()`, and `reshape_position_store()`. If a reshape actually was underway (`mddev->reshape_position != MaxSector`), the parameters are preserved so the reshape can resume when the array is restarted. Furthermore, callers of `__md_stop()` hold `mddev->reconfig_mutex` and all writes/sync threads are stopped prior to the call, making the operation safe and race-free.
|
| 140/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 8850
output: 35
thoughts: 435
Thoughts: **Analyzing a RAID5 Kernel Crash**
Okay, here's what's running through my head. This crash report points to a kernel bug in the RAID5 implementation, specifically within `drivers/md/raid5.c` at line 8117, inside the `raid5_run` function. The crash trace leads back through `md_run`, `do_md_run`, and a few other functions, highlighting a potential issue related to array state changes.
It looks like the root cause has something to do with stopping a RAID array and a pending reshape operation. The scenario seems to be: the array is taken down to an "inactive" state (`mode == 2`) which I'm assuming is a controlled shutdown or maintenance state. During this shutdown, and before the reshape has really started, some reshape-related parameters (`delta_disks`, `new_level`, etc.) are set, which is normal for a planned transition. The key seems to be that a pending reshape is set, but *not* started.
When the array is stopped, the `__md_stop` function is invoked. This function detaches the persistent data, and frees some private data, but it *doesn't* clear the pending reshape parameters when `reshape_position == MaxSector` (indicating reshape wasn't started).
Later, when the array is restarted with `md_run`, `raid5_run` gets called. The code then checks some state variables. The code contains these assumptions:
* `if (mddev->reshape_position != MaxSector)` then begin reshape.
* `else` if the above is *not* true, and thus reshape has *not* begun:
* `BUG_ON(mddev->level != mddev->new_level)`
* `BUG_ON(mddev->layout != mddev->new_layout)`
* `BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors)`
* `BUG_ON(mddev->delta_disks != 0)` <-- **This is where it crashes!**
Since `reshape_position == MaxSector` and the stop operation didn't clean up the reshape parameters, `mddev->delta_disks` is not zero and the assumption on the last line fails.
Okay, my next steps are clear. I need to dig into the code around `raid5_run`, focusing on the interactions with `__md_stop`, `md_clean`, `do_md_stop`, and the state transitions involved. I'll need to use some code search tools to track down all the calls to and from those functions, and determine the exact conditions that lead to this state where reshape parameters are left in place after an inactive stop. I'll need to check the exact behaviour of these functions when a reshape is scheduled but not underway.
|
| 141/4 |
2026/09/09 20:38 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 142/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 10193
output: 34
thoughts: 27
Thoughts: Here's a summary of my thought process:
**Diving into the MD RAID Driver Code**
Okay, time to get my hands dirty. I need to investigate the `md_clean` and `do_md_stop` functions within the `drivers/md/md.c` file. These are crucial components of the Linux software RAID implementation, so understanding their behavior is key. I'm focusing on these specific functions because I'm betting that the current issue lies somewhere in the process of cleaning and stopping a degraded or faulty RAID array, which is where these two functions come into play. I'll need to carefully dissect the logic within both, paying close attention to any race conditions, potential data corruption scenarios, or interactions with other parts of the RAID driver that might be leading to this. I'll probably start by looking at how they handle error conditions and resource allocation. I anticipate this will involve a fair bit of code tracing and cross-referencing to other functions and data structures within the MD subsystem. It's time to put on my debugging hat and dig in!
|
| 143/4 |
2026/09/09 20:38 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 144/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 11678
output: 36
thoughts: 18
Thoughts: Okay, here's my take on those functions, thinking through it as you asked:
**Analyzing `do_md_stop` and `md_stop`**
Alright, let's drill down into `do_md_stop` and `md_stop`. My initial instinct, given my experience, is to immediately consider their context within the larger system. Are they related? What's their relationship to the overall workflow? The naming conventions suggest they are closely related - possibly interacting in some fashion.
I'd be looking for:
* **Their Roles:** What specific tasks do they perform? Is one a wrapper for the other? Is one responsible for initialization, the other for cleanup, or some more complex coordination?
* **Data Flow:** What inputs do they take? What outputs do they produce or modify? Understanding data dependencies is crucial to identify potential bottlenecks or areas for optimization.
* **Error Handling:** How do they handle exceptions or unexpected conditions? Are there robust checks in place to prevent data corruption or system instability? This is always a key area to scrutinize.
* **Dependencies:** What other functions or modules do they rely on? Are these dependencies well-defined, or do they introduce implicit couplings that could cause problems down the line?
* **Concurrency:** How do these functions handle concurrency? Are they thread-safe? Do they utilize any locking mechanisms? This is especially important in a multi-threaded or distributed environment.
* **Performance:** What is their expected performance profile? Are there any potential performance issues? Are they computationally intensive? Are they IO bound? Do we need to consider caching or memoization?
* **Potential Side-Effects:** The impact of `do_md_stop` and `md_stop` on the rest of the system is also something I'd want to consider immediately. What could go wrong? What are the potential impacts of a failure in either function?
In the end, I need a good understanding of what they *actually do*, how they fit together, and what impact they have to be able to evaluate their design.
|
| 145/4 |
2026/09/09 20:38 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 146/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 13330
output: 34
thoughts: 20
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Investigating `md_stop` in the `drivers/md/md.c` Module**
Okay, so I'm thinking, let's drill down into the `md_stop` function. Given the context, I'm assuming we're dealing with the core of the RAID functionality within the Linux kernel, and `md.c` is the prime location for array management. My immediate questions are: What triggers this `md_stop` call? What state transitions does it initiate? And, critically, how does it handle the complexities of potentially multiple active devices within the array and any pending I/O operations? I'm particularly interested in how it manages data consistency during the shutdown process, especially the interaction with the bitmap and journal if applicable to the given RAID level. I need to understand the sequencing β are we stopping the data devices first, or the metadata devices, or does the order vary depending on the array configuration? I want to see if there's any sophisticated error handling here, and how it handles potential deadlocks. I also wonder if `md_stop` is a blocking call, or if it uses a work queue or other asynchronous mechanism to avoid starving the system. I'll need to pay close attention to the lock usage within `md_stop` to see how it manages concurrent access to the array structures. Time to dig in and see the details of this crucial function.
|
| 147/4 |
2026/09/09 20:38 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_stop]
Results: map[SourceCode:7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
SourceFile:drivers/md/md.c]
|
| 148/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 13857
output: 41
thoughts: 12
Thoughts: Okay, here's my attempt at summarizing my internal thought process, as if I were considering the references to `__md_stop`, while keeping in mind I'm speaking to an expert:
**Investigating the `__md_stop` References**
Alright, let's dive into this `__md_stop` thing. My initial instinct is to treat this as potentially an internal marker or flag, and as an expert, I know these types of indicators can appear in all sorts of codebases. It likely acts as an anchor point within markdown, or a delimiter to indicate something specific about the conversion process.
I'm immediately thinking about its context. What ecosystem am I in? Is this related to a specific markdown processor like `pandoc`, `markdown-it`, or something custom? Is it part of a templating engine? Could it be a debugging aid, a feature flag, or something more nefarious, like an attempt at obfuscation? I need more information on how the text is being processed to really understand its significance.
My experience tells me this could be a simple, albeit potentially fragile, way to control rendering. It's possible the processing engine is looking for this string and acting as a type of trigger on that. It's likely something that can have unintended side effects, and should be carefully reviewed if you're planning on changing its position or removing it.
|
| 149/4 |
2026/09/09 20:38 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:5 Name:__md_stop]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7193 SourceSnippet:7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:md_stop SourceFile:drivers/md/md.c SourceLine:7108 SourceSnippet:7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
]] TruncatedOutput:false]
|
| 150/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 14592
output: 37
thoughts: 30
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Diving into `raid5_run`**
Alright, let's zero in on `raid5_run`. I need to refresh my memory on the critical role this function plays, so I'm heading directly to line 8117 (or thereabouts) in the codebase. I know it's probably where the heart of the RAID 5 operation happens, but I want to see *exactly* how it's implemented in this specific context. I'm especially keen to see how the function orchestrates the reads, writes, parity calculations, and error handling. I'll likely need to trace its call stack and analyze any related data structures it operates on. I'm anticipating some complex interactions with the underlying block device drivers and the journaling layer, if applicable. My focus will be on the critical path of the RAID 5 algorithm and any potential bottlenecks or areas for optimization. I'll be keeping an eye out for any subtle bugs, race conditions, or performance concerns that might have slipped through the cracks. Knowing the details is the only way to really understand the implications of this function.
|
| 151/4 |
2026/09/09 20:38 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8100 LineCount:40]
Results: map[Contents:8100: }
8101: } else if (mddev->reshape_backwards
8102: ? (here_new * chunk_sectors + min_offset_diff <=
8103: here_old * chunk_sectors)
8104: : (here_new * chunk_sectors >=
8105: here_old * chunk_sectors + (-min_offset_diff))) {
8106: /* Reading from the same stripe as writing to - bad */
8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
8108: mdname(mddev));
8109: return -EINVAL;
8110: }
8111: pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
8112: /* OK, we should be able to continue; */
8113: } else {
8114: BUG_ON(mddev->level != mddev->new_level);
8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
8120: if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
8121: test_bit(MD_HAS_PPL, &mddev->flags)) {
8122: pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
8123: mdname(mddev));
8124: clear_bit(MD_HAS_PPL, &mddev->flags);
8125: clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
8126: }
8127:
8128: if (mddev->private == NULL)
8129: conf = setup_conf(mddev);
8130: else
8131: conf = mddev->private;
8132:
8133: if (IS_ERR(conf))
8134: return PTR_ERR(conf);
8135:
8136: if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
8137: if (!journal_dev) {
8138: pr_warn("md/raid:%s: journal disk is missing, force array readonly\n",
8139: mdname(mddev));
]
|
| 152/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 15619
output: 27
thoughts: 165
Thoughts: **My Initial Thoughts on RAID5 and Beyond**
Okay, here's what's running through my mind as I examine this code. I'm focusing on `raid5_run` and specifically lines 8113-8118. It seems we have some `BUG_ON` checks here, which is interesting. These checks are essentially assertions about the state of the `mddev` structure during operation. We're verifying that the level, layout, chunk sectors, and importantly, `delta_disks` haven't changed during this specific phase of the RAID5 setup or operation. This indicates a potential assumption that these parameters are fixed once initialization is complete.
But, I'm not stopping there. I always like to look for patterns and ensure consistency across the codebase. My immediate thought is, "Do these checks exist in other RAID personalities, like RAID1 or RAID10?" Are these assertions a RAID5-specific behavior, or a more general safety net implemented throughout the MD layer?
Therefore, I'm going to quickly grep the `drivers/md/` directory for `delta_disks`. This will help me determine whether the same checks are used in other RAID implementations, or if this is a RAID5-specific check. This will help me contextualize the checks and see if there are any potential design patterns.
|
| 153/4 |
2026/09/09 20:38 |
tool |
grepper |
0m
Args: map[Expression:delta_disks PathPrefix:drivers/md]
Results: map[Output:
Full output is too long, showing 500 out of 572 lines.
Use more precise expression if possible.
drivers/md/dm-raid.c=41=struct raid_dev {
--
drivers/md/dm-raid.c-120-
drivers/md/dm-raid.c:121:/* Define flags for options with one argument (e.g. 'delta_disks +2') */
drivers/md/dm-raid.c-122-#define CTR_FLAG_OPTIONS_ONE_ARG (CTR_FLAG_REBUILD | \
--
drivers/md/dm-raid.c-141-
drivers/md/dm-raid.c:142:/* "raid1" does not accept stripe cache, data offset, delta_disks or any raid10 options */
drivers/md/dm-raid.c-143-#define RAID1_VALID_FLAGS (CTR_FLAGS_ANY_SYNC | \
--
drivers/md/dm-raid.c=230=struct raid_set {
--
drivers/md/dm-raid.c-239- int raid_disks;
drivers/md/dm-raid.c:240: int delta_disks;
drivers/md/dm-raid.c-241- int data_offset;
--
drivers/md/dm-raid.c=323=static struct arg_name_flag {
--
drivers/md/dm-raid.c-339- { CTR_FLAG_DATA_OFFSET, "data_offset"},
drivers/md/dm-raid.c:340: { CTR_FLAG_DELTA_DISKS, "delta_disks"},
drivers/md/dm-raid.c-341- { CTR_FLAG_RAID10_USE_NEAR_SETS, "raid10_use_near_sets"},
--
drivers/md/dm-raid.c=725=static void rs_set_new(struct raid_set *rs)
--
drivers/md/dm-raid.c-732- mddev->raid_disks = rs->raid_disks;
drivers/md/dm-raid.c:733: mddev->delta_disks = 0;
drivers/md/dm-raid.c-734-}
--
drivers/md/dm-raid.c=736=static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type,
--
drivers/md/dm-raid.c-759- rs->raid_disks = raid_devs;
drivers/md/dm-raid.c:760: rs->delta_disks = 0;
drivers/md/dm-raid.c-761-
--
drivers/md/dm-raid.c-769- rs->md.new_layout = rs->md.layout;
drivers/md/dm-raid.c:770: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-771- rs->md.resync_offset = MaxSector;
--
drivers/md/dm-raid.c=1130=static int parse_raid_params(struct raid_set *rs, struct dm_arg_set *as,
--
drivers/md/dm-raid.c-1389- if (test_and_set_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags)) {
drivers/md/dm-raid.c:1390: rs->ti->error = "Only one delta_disks argument pair allowed";
drivers/md/dm-raid.c-1391- return -EINVAL;
--
drivers/md/dm-raid.c-1398-
drivers/md/dm-raid.c:1399: rs->delta_disks = value;
drivers/md/dm-raid.c-1400- } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_STRIPE_CACHE))) {
--
drivers/md/dm-raid.c=1643=static int rs_set_dev_and_array_sectors(struct raid_set *rs, sector_t sectors, bool use_mddev)
drivers/md/dm-raid.c-1644-{
drivers/md/dm-raid.c:1645: int delta_disks;
drivers/md/dm-raid.c-1646- unsigned int data_stripes;
--
drivers/md/dm-raid.c-1650- if (use_mddev) {
drivers/md/dm-raid.c:1651: delta_disks = mddev->delta_disks;
drivers/md/dm-raid.c-1652- data_stripes = mddev_data_stripes(rs);
drivers/md/dm-raid.c-1653- } else {
drivers/md/dm-raid.c:1654: delta_disks = rs->delta_disks;
drivers/md/dm-raid.c-1655- data_stripes = rs_data_stripes(rs);
--
drivers/md/dm-raid.c-1657-
drivers/md/dm-raid.c:1658: /* Special raid1 case w/o delta_disks support (yet) */
drivers/md/dm-raid.c-1659- if (rt_is_raid1(rs->raid_type))
--
drivers/md/dm-raid.c-1662- if (rs->raid10_copies < 2 ||
drivers/md/dm-raid.c:1663: delta_disks < 0) {
drivers/md/dm-raid.c-1664- rs->ti->error = "Bogus raid10 data copies or delta disks";
--
drivers/md/dm-raid.c-1671-
drivers/md/dm-raid.c:1672: array_sectors = (data_stripes + delta_disks) * (dev_sectors - _get_reshape_sectors(rs));
drivers/md/dm-raid.c-1673- if (sector_div(array_sectors, rs->raid10_copies))
--
drivers/md/dm-raid.c-1680- /* Striped layouts */
drivers/md/dm-raid.c:1681: array_sectors = (data_stripes + delta_disks) * (dev_sectors - _get_reshape_sectors(rs));
drivers/md/dm-raid.c-1682-
--
drivers/md/dm-raid.c=1715=static void do_table_event(struct work_struct *ws)
--
drivers/md/dm-raid.c-1723- rs->array_sectors > rs->md.array_sectors &&
drivers/md/dm-raid.c:1724: !rs->md.delta_disks &&
drivers/md/dm-raid.c-1725- rs->md.raid_disks == rs->raid_disks) {
--
drivers/md/dm-raid.c=1743=static int rs_check_takeover(struct raid_set *rs)
--
drivers/md/dm-raid.c-1790- mddev->raid_disks /= near_copies;
drivers/md/dm-raid.c:1791: mddev->delta_disks = mddev->raid_disks;
drivers/md/dm-raid.c-1792- return 0;
--
drivers/md/dm-raid.c=1904=static bool rs_is_layout_change(struct raid_set *rs, bool use_mddev)
drivers/md/dm-raid.c-1905-{
drivers/md/dm-raid.c:1906: return (use_mddev ? rs->md.delta_disks : rs->delta_disks) ||
drivers/md/dm-raid.c-1907- rs->md.new_layout != rs->md.layout ||
--
drivers/md/dm-raid.c=1912=static bool rs_reshape_requested(struct raid_set *rs)
--
drivers/md/dm-raid.c-1926- if (rs_is_raid1(rs)) {
drivers/md/dm-raid.c:1927: if (rs->delta_disks)
drivers/md/dm-raid.c:1928: return !!rs->delta_disks;
drivers/md/dm-raid.c-1929-
--
drivers/md/dm-raid.c-1936- !__is_raid10_far(mddev->new_layout) &&
drivers/md/dm-raid.c:1937: rs->delta_disks >= 0;
drivers/md/dm-raid.c-1938-
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2003- __le32 new_stripe_sectors;
drivers/md/dm-raid.c:2004: __le32 delta_disks;
drivers/md/dm-raid.c-2005-
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2160-
drivers/md/dm-raid.c:2161: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/dm-raid.c-2162-
--
drivers/md/dm-raid.c-2168-
drivers/md/dm-raid.c:2169: if (mddev->delta_disks < 0 || mddev->reshape_backwards)
drivers/md/dm-raid.c-2170- sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_BACKWARDS);
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2271- mddev->new_chunk_sectors = le32_to_cpu(sb->new_stripe_sectors);
drivers/md/dm-raid.c:2272: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/dm-raid.c-2273- mddev->array_sectors = le64_to_cpu(sb->array_sectors);
--
drivers/md/dm-raid.c-2281-
drivers/md/dm-raid.c:2282: if (mddev->delta_disks < 0 ||
drivers/md/dm-raid.c:2283: (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS)))
drivers/md/dm-raid.c-2284- mddev->reshape_backwards = 1;
--
drivers/md/dm-raid.c-2320- mddev->chunk_sectors, mddev->new_chunk_sectors);
drivers/md/dm-raid.c:2321: if (rs->delta_disks)
drivers/md/dm-raid.c-2322- DMERR(" current %u disks vs new %u disks",
drivers/md/dm-raid.c:2323: mddev->raid_disks, mddev->raid_disks + rs->delta_disks);
drivers/md/dm-raid.c-2324- if (rs_is_raid10(rs)) {
--
drivers/md/dm-raid.c-2378- } else if (new_devs != rebuilds &&
drivers/md/dm-raid.c:2379: new_devs != rs->delta_disks) {
drivers/md/dm-raid.c-2380- DMERR("New device injected into existing raid set without "
drivers/md/dm-raid.c:2381: "'delta_disks' or 'rebuild' parameter specified");
drivers/md/dm-raid.c-2382- return -EINVAL;
--
drivers/md/dm-raid.c=2630=static int rs_adjust_data_offsets(struct raid_set *rs)
--
drivers/md/dm-raid.c-2645-
drivers/md/dm-raid.c:2646: if (rs->delta_disks < 0) {
drivers/md/dm-raid.c-2647- /*
--
drivers/md/dm-raid.c-2657-
drivers/md/dm-raid.c:2658: } else if (rs->delta_disks > 0) {
drivers/md/dm-raid.c-2659- /*
--
drivers/md/dm-raid.c=2784=static int rs_prepare_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2817- else if (rs_is_raid1(rs)) {
drivers/md/dm-raid.c:2818: if (rs->delta_disks) {
drivers/md/dm-raid.c:2819: /* Process raid1 via delta_disks */
drivers/md/dm-raid.c:2820: mddev->degraded = rs->delta_disks < 0 ? -rs->delta_disks : rs->delta_disks;
drivers/md/dm-raid.c-2821- reshape = true;
drivers/md/dm-raid.c-2822- } else {
drivers/md/dm-raid.c:2823: /* Process raid1 without delta_disks */
drivers/md/dm-raid.c-2824- mddev->raid_disks = rs->raid_disks;
--
drivers/md/dm-raid.c=2849=static int rs_setup_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2856-
drivers/md/dm-raid.c:2857: mddev->delta_disks = rs->delta_disks;
drivers/md/dm-raid.c-2858- cur_raid_devs = mddev->raid_disks;
--
drivers/md/dm-raid.c-2860- /* Ignore impossible layout change whilst adding/removing disks */
drivers/md/dm-raid.c:2861: if (mddev->delta_disks &&
drivers/md/dm-raid.c-2862- mddev->layout != mddev->new_layout) {
drivers/md/dm-raid.c:2863: DMINFO("Ignoring invalid layout change with delta_disks=%d", rs->delta_disks);
drivers/md/dm-raid.c-2864- mddev->new_layout = mddev->layout;
--
drivers/md/dm-raid.c-2889- /* Add disk(s) */
drivers/md/dm-raid.c:2890: if (rs->delta_disks > 0) {
drivers/md/dm-raid.c-2891- /* Prepare disks for check in raid4/5/6/10 {check|start}_reshape */
--
drivers/md/dm-raid.c-2909- /* Remove disk(s) */
drivers/md/dm-raid.c:2910: } else if (rs->delta_disks < 0) {
drivers/md/dm-raid.c-2911- r = rs_set_dev_and_array_sectors(rs, rs->ti->len, true);
--
drivers/md/dm-raid.c-2931- * adding/removing reshape space has to be at
drivers/md/dm-raid.c:2932: * the proper address (see above with delta_disks):
drivers/md/dm-raid.c-2933- *
--
drivers/md/dm-raid.c=2957=static void rs_reset_inconclusive_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2960- rs_set_cur(rs);
drivers/md/dm-raid.c:2961: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-2962- rs->md.reshape_backwards = 0;
--
drivers/md/dm-raid.c=3526=static void raid_status(struct dm_target *ti, status_type_t type,
--
drivers/md/dm-raid.c-3675- DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_DELTA_DISKS),
drivers/md/dm-raid.c:3676: max(rs->delta_disks, mddev->delta_disks));
drivers/md/dm-raid.c-3677- if (test_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags))
--
drivers/md/dm-raid.c=4117=static void raid_resume(struct dm_target *ti)
--
drivers/md/dm-raid.c-4134- /* Only reduce raid set size before running a disk removing reshape. */
drivers/md/dm-raid.c:4135: if (mddev->delta_disks < 0)
drivers/md/dm-raid.c-4136- rs_set_capacity(rs);
--
drivers/md/md-llbitmap.c=1431=static int llbitmap_resize(struct mddev *mddev, sector_t blocks, int chunksize)
--
drivers/md/md-llbitmap.c-1448-
drivers/md/md-llbitmap.c:1449: reshape = mddev->delta_disks || mddev->new_level != mddev->level ||
drivers/md/md-llbitmap.c-1450- mddev->new_layout != mddev->layout ||
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1512- mddev->reshape_position = sb->reshape_position;
drivers/md/md.c:1513: mddev->delta_disks = sb->delta_disks;
drivers/md/md.c-1514- mddev->new_level = sb->new_level;
--
drivers/md/md.c-1516- mddev->new_chunk_sectors = sb->new_chunk >> 9;
drivers/md/md.c:1517: if (mddev->delta_disks < 0)
drivers/md/md.c-1518- mddev->reshape_backwards = 1;
--
drivers/md/md.c-1520- mddev->reshape_position = MaxSector;
drivers/md/md.c:1521: mddev->delta_disks = 0;
drivers/md/md.c-1522- mddev->new_level = mddev->level;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
drivers/md/md.c:1655: sb->delta_disks = mddev->delta_disks;
drivers/md/md.c-1656- sb->new_layout = mddev->new_layout;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2055- mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c:2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/md.c-2057- mddev->new_level = le32_to_cpu(sb->new_level);
--
drivers/md/md.c-2059- mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
drivers/md/md.c:2060: if (mddev->delta_disks < 0 ||
drivers/md/md.c:2061: (mddev->delta_disks == 0 &&
drivers/md/md.c-2062- (le32_to_cpu(sb->feature_map)
--
drivers/md/md.c-2066- mddev->reshape_position = MaxSector;
drivers/md/md.c:2067: mddev->delta_disks = 0;
drivers/md/md.c-2068- mddev->new_level = mddev->level;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
drivers/md/md.c:2268: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/md.c-2269- sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/md.c-2270- sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
drivers/md/md.c:2271: if (mddev->delta_disks == 0 &&
drivers/md/md.c-2272- mddev->reshape_backwards)
--
drivers/md/md.c=2794=void md_update_sb(struct mddev *mddev, int force_change)
--
drivers/md/md.c-2836- if (rdev->raid_disk >= 0 &&
drivers/md/md.c:2837: mddev->delta_disks >= 0 &&
drivers/md/md.c-2838- test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
--
drivers/md/md.c=3286=slot_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3336- if (slot >= rdev->mddev->raid_disks &&
drivers/md/md.c:3337: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
drivers/md/md.c-3338- return -ENOSPC;
--
drivers/md/md.c-3357- if (slot >= rdev->mddev->raid_disks &&
drivers/md/md.c:3358: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
drivers/md/md.c-3359- return -ENOSPC;
--
drivers/md/md.c=3899=static int analyze_sbs(struct mddev *mddev)
--
drivers/md/md.c-3944- }
drivers/md/md.c:3945: if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks)) &&
drivers/md/md.c-3946- !test_bit(Journal, &rdev->flags)) {
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4130-
drivers/md/md.c:4131: /* ->takeover must set new_* and/or delta_disks
drivers/md/md.c-4132- * if it succeeds, and may set them when it fails.
--
drivers/md/md.c-4138- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/md.c:4139: mddev->raid_disks -= mddev->delta_disks;
drivers/md/md.c:4140: mddev->delta_disks = 0;
drivers/md/md.c-4141- mddev->reshape_backwards = 0;
--
drivers/md/md.c-4160- mddev->chunk_sectors = mddev->new_chunk_sectors;
drivers/md/md.c:4161: mddev->delta_disks = 0;
drivers/md/md.c-4162- mddev->reshape_backwards = 0;
--
drivers/md/md.c=4403=raid_disks_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4407- if (mddev->reshape_position != MaxSector &&
drivers/md/md.c:4408: mddev->delta_disks != 0)
drivers/md/md.c-4409- return sprintf(page, "%d (%d)\n", mddev->raid_disks,
drivers/md/md.c:4410: mddev->raid_disks - mddev->delta_disks);
drivers/md/md.c-4411- return sprintf(page, "%d\n", mddev->raid_disks);
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4435- struct md_rdev *rdev;
drivers/md/md.c:4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
drivers/md/md.c-4437-
--
drivers/md/md.c-4447- err = 0;
drivers/md/md.c:4448: mddev->delta_disks = n - olddisks;
drivers/md/md.c-4449- mddev->raid_disks = n;
drivers/md/md.c:4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
drivers/md/md.c-4451- } else
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5738- mddev->reshape_position = new;
drivers/md/md.c:5739: mddev->delta_disks = 0;
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
--
drivers/md/md.c=5764=reshape_direction_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5781- /* check if we are allowed to change */
drivers/md/md.c:5782: if (mddev->delta_disks)
drivers/md/md.c-5783- err = -EBUSY;
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7006- mddev->can_decrease_events = 0;
drivers/md/md.c:7007: mddev->delta_disks = 0;
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7974- mddev->new_layout = mddev->layout;
drivers/md/md.c:7975: mddev->delta_disks = 0;
drivers/md/md.c-7976- mddev->reshape_backwards = 0;
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8059-
drivers/md/md.c:8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
drivers/md/md.c:8061: if (mddev->delta_disks < 0)
drivers/md/md.c-8062- mddev->reshape_backwards = 1;
drivers/md/md.c:8063: else if (mddev->delta_disks > 0)
drivers/md/md.c-8064- mddev->reshape_backwards = 0;
--
drivers/md/md.c-8067- if (rv < 0) {
drivers/md/md.c:8068: mddev->delta_disks = 0;
drivers/md/md.c-8069- mddev->reshape_backwards = 0;
--
drivers/md/md.c=9680=static void md_finish_sync(struct mddev *mddev, enum sync_action action)
--
drivers/md/md.c-9695- rdev_for_each_rcu(rdev, mddev)
drivers/md/md.c:9696: if (mddev->delta_disks >= 0 &&
drivers/md/md.c-9697- rdev_needs_recovery(rdev, mddev->curr_resync))
--
drivers/md/md.c-9702- if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
drivers/md/md.c:9703: mddev->delta_disks > 0 &&
drivers/md/md.c-9704- mddev->pers->finish_reshape &&
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10879- /*
drivers/md/md.c:10880: * Since mddev->delta_disks has already updated in update_raid_disks,
drivers/md/md.c-10881- * so it is time to check reshape.
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-467- sector_t reshape_position;
drivers/md/md.h:468: int delta_disks, new_level, new_layout;
drivers/md/md.h-469- int new_chunk_sectors;
--
drivers/md/raid0.c=646=static void *raid0_takeover_raid45(struct mddev *mddev)
--
drivers/md/raid0.c-672- mddev->raid_disks--;
drivers/md/raid0.c:673: mddev->delta_disks = -1;
drivers/md/raid0.c-674- /* make sure it will be not marked as dirty */
--
drivers/md/raid0.c=683=static void *raid0_takeover_raid10(struct mddev *mddev)
--
drivers/md/raid0.c-713- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid0.c:714: mddev->delta_disks = - mddev->raid_disks / 2;
drivers/md/raid0.c:715: mddev->raid_disks += mddev->delta_disks;
drivers/md/raid0.c-716- mddev->degraded = 0;
--
drivers/md/raid0.c=725=static void *raid0_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid0.c-757- mddev->chunk_sectors = chunksect;
drivers/md/raid0.c:758: mddev->delta_disks = 1 - mddev->raid_disks;
drivers/md/raid0.c-759- mddev->raid_disks = 1;
--
drivers/md/raid1.c=3315=static int raid1_reshape(struct mddev *mddev)
--
drivers/md/raid1.c-3348-
drivers/md/raid1.c:3349: raid_disks = mddev->raid_disks + mddev->delta_disks;
drivers/md/raid1.c-3350-
--
drivers/md/raid1.c-3398- conf->raid_disks = mddev->raid_disks = raid_disks;
drivers/md/raid1.c:3399: mddev->delta_disks = 0;
drivers/md/raid1.c-3400-
--
drivers/md/raid10.c=3756=static int setup_geo(struct geom *geo, struct mddev *mddev, enum geo_type new)
--
drivers/md/raid10.c-3763- chunk = mddev->chunk_sectors;
drivers/md/raid10.c:3764: disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid10.c-3765- break;
--
drivers/md/raid10.c-3775- chunk = mddev->new_chunk_sectors;
drivers/md/raid10.c:3776: disks = mddev->raid_disks + mddev->delta_disks;
drivers/md/raid10.c-3777- break;
--
drivers/md/raid10.c=3828=static struct r10conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid10.c-3855- conf->mirrors = kzalloc_objs(struct raid10_info,
drivers/md/raid10.c:3856: mddev->raid_disks + max(0, -mddev->delta_disks));
drivers/md/raid10.c-3857- if (!conf->mirrors)
--
drivers/md/raid10.c=4180=static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
--
drivers/md/raid10.c-4196- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid10.c:4197: mddev->delta_disks = mddev->raid_disks;
drivers/md/raid10.c-4198- mddev->raid_disks *= 2;
--
drivers/md/raid10.c=4237=static int raid10_check_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4241- * - chunk size (to ->new_chunk_sectors)
drivers/md/raid10.c:4242: * - raid_disks (by delta_disks)
drivers/md/raid10.c-4243- * or when trying to restart a reshape that was ongoing.
--
drivers/md/raid10.c-4278- conf->mirrors_new = NULL;
drivers/md/raid10.c:4279: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4280- /* allocate new 'mirrors' list */
--
drivers/md/raid10.c-4282- kzalloc_objs(struct raid10_info,
drivers/md/raid10.c:4283: mddev->raid_disks + mddev->delta_disks);
drivers/md/raid10.c-4284- if (!conf->mirrors_new)
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4403-
drivers/md/raid10.c:4404: if (spares < mddev->delta_disks)
drivers/md/raid10.c-4405- return -EINVAL;
--
drivers/md/raid10.c-4407- conf->offset_diff = min_offset_diff;
drivers/md/raid10.c:4408: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4409- new_pool = create_r10bio_pool(new.raid_disks);
--
drivers/md/raid10.c-4439-
drivers/md/raid10.c:4440: if (mddev->delta_disks && mddev->bitmap) {
drivers/md/raid10.c-4441- struct mdp_superblock_1 *sb = NULL;
--
drivers/md/raid10.c-4482-out:
drivers/md/raid10.c:4483: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4484- rdev_for_each(rdev, mddev)
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5055-
drivers/md/raid10.c:5056: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-5057- if (mddev->resync_offset > mddev->resync_max_sectors) {
--
drivers/md/raid10.c-5064- for (d = conf->geo.raid_disks ;
drivers/md/raid10.c:5065: d < conf->geo.raid_disks - mddev->delta_disks;
drivers/md/raid10.c-5066- d++) {
--
drivers/md/raid10.c-5077- mddev->reshape_position = MaxSector;
drivers/md/raid10.c:5078: mddev->delta_disks = 0;
drivers/md/raid10.c-5079- mddev->reshape_backwards = 0;
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7728- else
drivers/md/raid5.c:7729: conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid5.c-7730- max_disks = max(conf->raid_disks, conf->previous_raid_disks);
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8062- }
drivers/md/raid5.c:8063: old_disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid5.c-8064- /* reshape_position must be on a new-stripe boundary, and one
--
drivers/md/raid5.c-8084- * from */
drivers/md/raid5.c:8085: if (mddev->delta_disks == 0) {
drivers/md/raid5.c-8086- /* We cannot be sure it is safe to start an in-place
--
drivers/md/raid5.c-8116- BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
drivers/md/raid5.c:8117: BUG_ON(mddev->delta_disks != 0);
drivers/md/raid5.c-8118- }
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8591- return -EINVAL;
drivers/md/raid5.c:8592: if (mddev->delta_disks == 0 &&
drivers/md/raid5.c-8593- mddev->new_layout == mddev->layout &&
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
--
drivers/md/raid5.c-8608- min = 4;
]
|
| 154/4 |
2026/09/09 20:38 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 26869
output: 37
thoughts: 50
Thoughts: Here's my thinking process:
**Diving into the RAID5 Configuration in the Linux Kernel**
Okay, so I'm looking at the `setup_conf` function within `drivers/md/raid5.c`. My immediate goal is to understand how the RAID5 configuration is handled. I need to get a handle on the intricacies of the driver, so I'm honing in on lines 7720-7735 as a starting point. I'm assuming that the developers have included comments and code organization that is sensible for understanding the relevant logic within this function, so this will be a good place to start my investigation. I'm expecting this section to provide insight into aspects like disk identification, parity calculations, or data striping. With my expertise in storage systems, I anticipate recognizing the low-level mechanics being implemented. I'll need to pay close attention to the variable definitions, conditional statements, and function calls within this specific segment to reconstruct the configuration process in my mind. Ultimately, I'm expecting to understand *how* the `setup_conf` function sets up and initializes the RAID5 array, step-by-step.
|
| 155/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:7720 LineCount:20]
Results: map[Contents:7720: break;
7721: }
7722: }
7723:
7724: conf->bypass_threshold = BYPASS_THRESHOLD;
7725: conf->raid_disks = mddev->raid_disks;
7726: if (mddev->reshape_position == MaxSector)
7727: conf->previous_raid_disks = mddev->raid_disks;
7728: else
7729: conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
7730: max_disks = max(conf->raid_disks, conf->previous_raid_disks);
7731:
7732: conf->disks = kzalloc_objs(struct disk_info, max_disks);
7733:
7734: if (!conf->disks)
7735: goto abort;
7736:
7737: for (i = 0; i < max_disks; i++) {
7738: conf->disks[i].extra_page = alloc_page(GFP_KERNEL);
7739: if (!conf->disks[i].extra_page)
]
|
| 156/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 27538
output: 36
thoughts: 522
Thoughts: **Analyzing RAID Reshape and Disk Configuration**
Okay, let's break this down. First, I'm examining how the previous RAID disk count (`conf->previous_raid_disks`) is set. It seems to depend on the reshape position (`mddev->reshape_position`). If `reshape_position` is at `MaxSector`, indicating no active reshape, the previous disk count is set to the current number of disks (`mddev->raid_disks`). Otherwise, it's calculated by subtracting the delta disks (`mddev->delta_disks`).
Next, I see a potential issue in `raid10.c` where memory for mirrors is allocated using `mddev->raid_disks + max(0, -mddev->delta_disks)`. Hmm, if `delta_disks` is non-zero, this allocation might be...interesting in the context of RAID10. I need to keep that in mind.
Now, looking at `raid5_run`, I see a clear distinction. If `reshape_position` is *not* at `MaxSector`, the code handles an in-progress reshape. However, when `reshape_position` *is* at `MaxSector`, it asserts that `level`, `layout`, `chunk_sectors`, and, crucially, `delta_disks` are all consistent (or zero for `delta_disks`). It *expects* `delta_disks` to be zero when no reshape is active.
This raises a key question. Why does `raid5_run` require `delta_disks` to be zero when no reshape is in progress? The more I think about it, it's because when an array is initially started, if it's *not* resuming a reshape, the system should not have any pending reshape configuration. If an array was stopped, where did the pending reshape go? It shouldn't persist. Any reshape configuration pending only in memory during runtime *should* be cleaned up when the array is stopped and restarted. I need to verify that this is the case.
I need to understand the state transitions. Let's dig into how an array goes inactive to active and how `raid_disks_store` behaves in each state. That might illuminate this. Time to examine the `raid_disks_store` function...
|
| 157/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4415 LineCount:55]
Results: map[Contents:4415:
4416: static ssize_t
4417: raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
4418: {
4419: unsigned int n;
4420: unsigned int noio_flags;
4421: int err;
4422:
4423: err = kstrtouint(buf, 10, &n);
4424: if (err < 0)
4425: return err;
4426:
4427: err = mddev_suspend_and_lock(mddev);
4428: if (err)
4429: return err;
4430: noio_flags = memalloc_noio_save();
4431: if (mddev->pers) {
4432: if (n != mddev->raid_disks)
4433: err = update_raid_disks(mddev, n);
4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
4439: rdev_for_each(rdev, mddev) {
4440: if (olddisks < n &&
4441: rdev->data_offset < rdev->new_data_offset)
4442: goto out_unlock;
4443: if (olddisks > n &&
4444: rdev->data_offset > rdev->new_data_offset)
4445: goto out_unlock;
4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
4451: } else
4452: mddev->raid_disks = n;
4453: out_unlock:
4454: memalloc_noio_restore(noio_flags);
4455: mddev_unlock_and_resume(mddev);
4456: return err ? err : len;
4457: }
4458: static struct md_sysfs_entry md_raid_disks =
4459: __ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
4460:
4461: static ssize_t
4462: uuid_show(struct mddev *mddev, char *page)
4463: {
4464: return sprintf(page, "%pU\n", mddev->uuid);
4465: }
4466: static struct md_sysfs_entry md_uuid =
4467: __ATTR(uuid, S_IRUGO, uuid_show, NULL);
4468:
4469: static ssize_t
]
|
| 158/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 29466
output: 37
thoughts: 160
Thoughts: **Analyzing `raid_disks_store` in the Linux RAID Code**
Okay, let's dissect this. I'm looking at the `raid_disks_store` function, and it seems like we're handling the number of active disks in a RAID array. The code branches based on the state of the `mddev` structure. Specifically, I'm focusing on the case where `mddev->pers` is NULL (meaning the RAID personality isn't initialized yet), and `mddev->reshape_position` is equal to `MaxSector`. This is the interesting scenario.
In this case, it appears that we are simply assigning the new disk count (`n`) directly to `mddev->raid_disks`. It's a straight assignment. It's a quick and dirty way to update, probably done during initialization or when no reshape is in progress. I notice that `delta_disks` isn't being set here either. Interesting. So, if we are in this state, there's no complex adjustment needed. The count just updates.
Now, let's dive deeper and see what `update_raid_disks` does in those other situations. That's where the real complexity probably lies.
|
| 159/4 |
2026/09/09 20:39 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:update_raid_disks]
Results: map[SourceCode:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
SourceFile:drivers/md/md.c]
|
| 160/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 30612
output: 36
thoughts: 134
Thoughts: **Analyzing RAID Disk Updates**
Okay, so I'm looking at how the `update_raid_disks()` function works. I see it first calculates the difference between the new number of disks (`raid_disks`) and the current number (`mddev->raid_disks`), storing that delta in `mddev->delta_disks`. Then, it calls `mddev->pers->check_reshape(mddev)`. Hmm, if `check_reshape` *succeeds*, that `delta_disks` value is going to be non-zero! That seems potentially significant.
My first thought is, this seems fine for a *simple* disk addition or removal, but what about more complex scenarios? Are we handling chunk size or layout changes properly within this function? I'd better double-check to see if the chunk size, layout, and level of the array are correctly handled. Let me quickly examine `chunk_size_store`, `layout_store`, and `level_store` for any insights. I'll search for those in `drivers/md/md.c` to see how the system handles those parameters, particularly in relation to this update process. I need to make sure we're not missing anything critical in updating the RAID configuration.
|
| 161/4 |
2026/09/09 20:39 |
tool |
grepper |
0m
Args: map[Expression:chunk_size_store|layout_store PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=4367=static ssize_t
drivers/md/md.c:4368:layout_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-4369-{
--
drivers/md/md.c=4399=static struct md_sysfs_entry md_layout =
drivers/md/md.c:4400:__ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
drivers/md/md.c-4401-
--
drivers/md/md.c=4480=static ssize_t
drivers/md/md.c:4481:chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-4482-{
--
drivers/md/md.c=4512=static struct md_sysfs_entry md_chunk_size =
drivers/md/md.c:4513:__ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
drivers/md/md.c-4514-
]
|
| 162/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 31367
output: 36
thoughts: 17
Thoughts: Here's my take on those thoughts:
**Analyzing Storage Configuration**
Okay, so I'm diving into the code and my focus is on how data is actually *stored*. My first priority is to understand the relationship between the `layout_store` and the `chunk_size_store`. These two pieces are probably the core of the physical data organization. I need to figure out what each of these variables represents. The `layout_store` likely holds information about the overall structure or arrangement of the data, while `chunk_size_store` defines how the data is split into smaller units for storage and retrieval. I anticipate they are critical to performance. Let's dig in and figure out the exact function of each, and how the interact. This will be key to understanding the data lifecycle in this system.
|
| 163/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4365 LineCount:40]
Results: map[Contents:4365: }
4366:
4367: static ssize_t
4368: layout_store(struct mddev *mddev, const char *buf, size_t len)
4369: {
4370: unsigned int n;
4371: int err;
4372:
4373: err = kstrtouint(buf, 10, &n);
4374: if (err < 0)
4375: return err;
4376: err = mddev_lock(mddev);
4377: if (err)
4378: return err;
4379:
4380: if (mddev->pers) {
4381: if (mddev->pers->check_reshape == NULL)
4382: err = -EBUSY;
4383: else if (!md_is_rdwr(mddev))
4384: err = -EROFS;
4385: else {
4386: mddev->new_layout = n;
4387: err = mddev->pers->check_reshape(mddev);
4388: if (err)
4389: mddev->new_layout = mddev->layout;
4390: }
4391: } else {
4392: mddev->new_layout = n;
4393: if (mddev->reshape_position == MaxSector)
4394: mddev->layout = n;
4395: }
4396: mddev_unlock(mddev);
4397: return err ?: len;
4398: }
4399: static struct md_sysfs_entry md_layout =
4400: __ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
4401:
4402: static ssize_t
4403: raid_disks_show(struct mddev *mddev, char *page)
4404: {
]
|
| 164/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 32153
output: 36
thoughts: 12
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm deep in my domain of expertise:
**Checking `chunk_size_store`**
Alright, let's take a look at `chunk_size_store`. I know its probably storing the configuration settings for how the data is handled. I need to understand the current chunking strategy. What is it now? Is the configured value what I expect? I can probably get a sense of the code's behavior by knowing this parameter. I might need to compare it with the other parameters available. I wonder what implications any recent changes may have. I should be able to confirm with a brief inspection. Knowing the stored chunk size is fundamental to understanding how the system is currently operating and any potential performance or memory considerations. Let's see what's in there.
|
| 165/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4480 LineCount:40]
Results: map[Contents:4480: static ssize_t
4481: chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
4482: {
4483: unsigned long n;
4484: int err;
4485:
4486: err = kstrtoul(buf, 10, &n);
4487: if (err < 0)
4488: return err;
4489:
4490: err = mddev_lock(mddev);
4491: if (err)
4492: return err;
4493: if (mddev->pers) {
4494: if (mddev->pers->check_reshape == NULL)
4495: err = -EBUSY;
4496: else if (!md_is_rdwr(mddev))
4497: err = -EROFS;
4498: else {
4499: mddev->new_chunk_sectors = n >> 9;
4500: err = mddev->pers->check_reshape(mddev);
4501: if (err)
4502: mddev->new_chunk_sectors = mddev->chunk_sectors;
4503: }
4504: } else {
4505: mddev->new_chunk_sectors = n >> 9;
4506: if (mddev->reshape_position == MaxSector)
4507: mddev->chunk_sectors = n >> 9;
4508: }
4509: mddev_unlock(mddev);
4510: return err ?: len;
4511: }
4512: static struct md_sysfs_entry md_chunk_size =
4513: __ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
4514:
4515: static ssize_t
4516: resync_start_show(struct mddev *mddev, char *page)
4517: {
4518: if (mddev->resync_offset == MaxSector)
4519: return sprintf(page, "none\n");
]
|
| 166/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 32989
output: 36
thoughts: 182
Thoughts: **My Analysis of RAID Layout Updates**
Okay, let me break this down. I'm looking at how RAID layouts and chunk sizes are updated, specifically through `layout_store` and `chunk_size_store`. The key here is what happens when `mddev->pers` is active, which tells me it's about a RAID personality.
I see that when a new layout or chunk size is proposed, the code sets `mddev->new_layout` or `mddev->new_chunk_sectors` and calls `mddev->pers->check_reshape(mddev)`. This is clearly the pre-validation step. But here's where it gets interesting: even if `check_reshape` *succeeds*, the actual `mddev->layout` and `mddev->chunk_sectors` values are *not* updated immediately. They are still holding the *old* values! That feels like a potential race condition or at least a point where things could be inconsistent. We have a "new" value, but the "current" working value hasn't changed. The reshape is a two step process.
Also, it looks like `mddev->delta_disks` is updated in `update_raid_disks()`. I need to figure out when this is called, and how it relates to `check_reshape`.
I should probably look at `level_store` next to make sure I haven't missed anything. I'll take a look at it now.
|
| 167/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4125 LineCount:45]
Results: map[Contents:4125: goto out_unlock;
4126: }
4127:
4128: rdev_for_each(rdev, mddev)
4129: rdev->new_raid_disk = rdev->raid_disk;
4130:
4131: /* ->takeover must set new_* and/or delta_disks
4132: * if it succeeds, and may set them when it fails.
4133: */
4134: priv = pers->takeover(mddev);
4135: if (IS_ERR(priv)) {
4136: mddev->new_level = mddev->level;
4137: mddev->new_layout = mddev->layout;
4138: mddev->new_chunk_sectors = mddev->chunk_sectors;
4139: mddev->raid_disks -= mddev->delta_disks;
4140: mddev->delta_disks = 0;
4141: mddev->reshape_backwards = 0;
4142: put_pers(pers);
4143: pr_warn("md: %s: %s would not accept array\n",
4144: mdname(mddev), clevel);
4145: rv = PTR_ERR(priv);
4146: goto out_unlock;
4147: }
4148:
4149: /* Looks like we have a winner */
4150: mddev_detach(mddev);
4151:
4152: spin_lock(&mddev->lock);
4153: oldpers = mddev->pers;
4154: oldpriv = mddev->private;
4155: mddev->pers = pers;
4156: mddev->private = priv;
4157: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
4158: mddev->level = mddev->new_level;
4159: mddev->layout = mddev->new_layout;
4160: mddev->chunk_sectors = mddev->new_chunk_sectors;
4161: mddev->delta_disks = 0;
4162: mddev->reshape_backwards = 0;
4163: mddev->degraded = 0;
4164: spin_unlock(&mddev->lock);
4165:
4166: if (oldpers->sync_request == NULL &&
4167: mddev->external) {
4168: /* We are converting from a no-redundancy array
4169: * to a redundancy array and metadata is managed
]
|
| 168/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 34256
output: 36
thoughts: 24
Thoughts: Here's my summary, as though I'm thinking it:
**Analyzing Validation Procedures**
Okay, let's dive in. I need to get a handle on the validation procedures being used here, specifically focusing on `super_1_validate` and `super_90_validate`. The names alone don't tell me much, so I need to go through the code and figure out the exact criteria and logic implemented in each one. It's time to start reading and understanding these validation routines. Hopefully, the code is well-commented! Let's see what we've got.
|
| 169/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:1510 LineCount:25]
Results: map[Contents:1510:
1511: if (mddev->minor_version >= 91) {
1512: mddev->reshape_position = sb->reshape_position;
1513: mddev->delta_disks = sb->delta_disks;
1514: mddev->new_level = sb->new_level;
1515: mddev->new_layout = sb->new_layout;
1516: mddev->new_chunk_sectors = sb->new_chunk >> 9;
1517: if (mddev->delta_disks < 0)
1518: mddev->reshape_backwards = 1;
1519: } else {
1520: mddev->reshape_position = MaxSector;
1521: mddev->delta_disks = 0;
1522: mddev->new_level = mddev->level;
1523: mddev->new_layout = mddev->layout;
1524: mddev->new_chunk_sectors = mddev->chunk_sectors;
1525: }
1526: if (mddev->level == 0)
1527: mddev->layout = -1;
1528:
1529: if (sb->state & (1<<MD_SB_CLEAN))
1530: mddev->resync_offset = MaxSector;
1531: else {
1532: if (sb->events_hi == sb->cp_events_hi &&
1533: sb->events_lo == sb->cp_events_lo) {
1534: mddev->resync_offset = sb->recovery_cp;
]
|
| 170/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 34898
output: 36
thoughts: 12
Thoughts: Okay, here's my interpretation of what's going on, formatted as you requested:
**Analyzing the Validation Process for `super_1_validate`**
Alright, let's dive into this `super_1_validate` function. My initial thought is to understand its purpose within the broader system. What's it validating? Data input? Configuration settings? Some intermediate calculation? Understanding the "what" is key to understanding the "how."
Now, I need to read the code itself. I'm looking for clues about the validation logic. Is it a series of conditional checks? Are there regular expressions involved? Are we dealing with external dependencies or database lookups? I'm paying close attention to any error handling too. How are invalid inputs or conditions managed? Are exceptions thrown, errors logged, or are we returning error codes? This is critical for assessing the robustness of the implementation.
I also want to consider the context. What's the expected input format? What are the valid ranges or constraints? Is there documentation that sheds light on these aspects? My experience tells me that comprehensive validation often involves multiple layers, potentially addressing type validation, range checks, and even business rules. I need to see how these different layers are handled.
From my perspective, a robust validation process should be designed to prevent unexpected errors. Good validation protects the integrity of the system and, depending on its location, it does this early. It's best if it can provide clear, actionable feedback to the caller (or user) when validation fails. Now, I need to look at the code to see if these principles are being followed. Letβs go!
|
| 171/4 |
2026/09/09 20:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:2050 LineCount:25]
Results: map[Contents:2050: mddev->bitmap_info.space =
2051: -mddev->bitmap_info.offset;
2052: }
2053:
2054: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2057: mddev->new_level = le32_to_cpu(sb->new_level);
2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
2063: & MD_FEATURE_RESHAPE_BACKWARDS)))
2064: mddev->reshape_backwards = 1;
2065: } else {
2066: mddev->reshape_position = MaxSector;
2067: mddev->delta_disks = 0;
2068: mddev->new_level = mddev->level;
2069: mddev->new_layout = mddev->layout;
2070: mddev->new_chunk_sectors = mddev->chunk_sectors;
2071: }
2072:
2073: if (mddev->level == 0 &&
2074: !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT))
]
|
| 172/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 35798
output: 26
thoughts: 1568
Thoughts: **Analyzing RAID Reshape Parameters**
Okay, let's break this down. First, I see the initial setup for a reshape: `mddev->reshape_position` set to `MaxSector`, `mddev->delta_disks` to zero, and the "new" parameters (`new_level`, `new_layout`, `new_chunk_sectors`) initialized to the current values. This seems to represent the start of a reshape, or a return to a non-reshaping state.
Then I observe a key check within `raid5_run`: the code verifies that if `reshape_position` *isn't* `MaxSector`, meaning a reshape is in progress, it handles the ongoing reshape. Conversely, if `reshape_position` *is* `MaxSector`, it asserts that the "new" parameters match the current ones and that `delta_disks` is zero. This tells me that `MaxSector` indicates a completed or non-existent reshape and that there are several variables that need to be reset when ending a reshape. The consistency checks are important.
Now, consider the `reshape_backwards` flag. I note that this flag is set based on a feature flag from the superblock (`MD_FEATURE_RESHAPE_ACTIVE`) during validation. If not active, then the flag should have been reset to zero by initialization or `md_clean`. Several functions, like `level_store`, `update_raid_disks`, `raid10_finish_reshape`, and `reshape_position_store` all consistently clear `reshape_backwards` when concluding or resetting reshape operations. This suggests it's a "clean up" flag.
Now comes the crucial part: what happens when `__md_stop()` is called *during* a reshape? The key is that `reshape_position` is *not* `MaxSector`, meaning it's still in progress! We *don't* want to wipe out the in-progress reshape parameters, because we want it to continue when the array restarts. If the array is fully stopped (mode == 0), then `md_clean()` is called, which will wipe everything. So the `reshape_position` must be stored on disk somehow (in the superblock).
Here's the problem: what if the user messes with `raid_disks` while the array is inactive?
Checking `raid_disks_store` reveals an important scenario. If `mddev->pers` is non-null (the array is active), `update_raid_disks()` is called. If the array is inactive (`mddev->pers` is null), and a reshape is *not* in progress (`reshape_position == MaxSector`), then `raid_disks` is simply updated. *However*, if a reshape is in progress, the code attempts to handle changes to `raid_disks` in a very specific way. Importantly, `update_raid_disks` updates `delta_disks`, but it *doesn't* actually update `raid_disks` directly. This implies that changes to `raid_disks` are only *proposed* or *validated* via `delta_disks` if `check_reshape` is successful. And if successful, then the array is restarted, and `raid_disks` is updated, and the reshape is restarted. Now the question is where does `raid_disks` actually get changed?
|
| 173/4 |
2026/09/09 20:39 |
tool |
grepper |
0m
Args: map[Expression:check_reshape PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2040- */
drivers/md/dm-raid.c:2041:static int rs_check_reshape(struct raid_set *rs)
drivers/md/dm-raid.c-2042-{
--
drivers/md/dm-raid.c-2044-
drivers/md/dm-raid.c:2045: if (!mddev->pers || !mddev->pers->check_reshape)
drivers/md/dm-raid.c-2046- rs->ti->error = "Reshape not supported";
--
drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3294- if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) {
drivers/md/dm-raid.c:3295: r = rs_check_reshape(rs);
drivers/md/dm-raid.c-3296- if (r)
--
drivers/md/dm-raid.c-3302- if (rs->md.pers->start_reshape) {
drivers/md/dm-raid.c:3303: r = rs->md.pers->check_reshape(&rs->md);
drivers/md/dm-raid.c-3304- if (r) {
--
drivers/md/dm-raid.c=3996=static int rs_start_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-4013- */
drivers/md/dm-raid.c:4014: r = pers->check_reshape(mddev);
drivers/md/dm-raid.c-4015- if (r) {
drivers/md/dm-raid.c:4016: rs->ti->error = "pers->check_reshape() failed";
drivers/md/dm-raid.c-4017- return r;
--
drivers/md/dm-raid.c-4021- * Personality may not provide start reshape method in which
drivers/md/dm-raid.c:4022: * case check_reshape above has already covered everything
drivers/md/dm-raid.c-4023- */
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4380- if (mddev->pers) {
drivers/md/md.c:4381: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-4382- err = -EBUSY;
--
drivers/md/md.c-4386- mddev->new_layout = n;
drivers/md/md.c:4387: err = mddev->pers->check_reshape(mddev);
drivers/md/md.c-4388- if (err)
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4493- if (mddev->pers) {
drivers/md/md.c:4494: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-4495- err = -EBUSY;
--
drivers/md/md.c-4499- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4500: err = mddev->pers->check_reshape(mddev);
drivers/md/md.c-4501- if (err)
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5249- if (mddev->reshape_position == MaxSector ||
drivers/md/md.c:5250: mddev->pers->check_reshape == NULL ||
drivers/md/md.c:5251: mddev->pers->check_reshape(mddev)) {
drivers/md/md.c-5252- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8038- /* change the number of raid disks */
drivers/md/md.c:8039: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-8040- return -EINVAL;
--
drivers/md/md.c-8065-
drivers/md/md.c:8066: rv = mddev->pers->check_reshape(mddev);
drivers/md/md.c-8067- if (rv < 0) {
--
drivers/md/md.c=8104=static int update_array_info(struct mddev *mddev, mdu_array_info_t *info)
--
drivers/md/md.c-8144- */
drivers/md/md.c:8145: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-8146- return -EINVAL;
--
drivers/md/md.c-8148- mddev->new_layout = info->layout;
drivers/md/md.c:8149: rv = mddev->pers->check_reshape(mddev);
drivers/md/md.c-8150- if (rv)
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10212- if (mddev->reshape_position != MaxSector) {
drivers/md/md.c:10213: if (mddev->pers->check_reshape == NULL ||
drivers/md/md.c:10214: mddev->pers->check_reshape(mddev) != 0)
drivers/md/md.c-10215- return false;
--
drivers/md/md.h=750=struct md_personality
--
drivers/md/md.h-774- sector_t (*size) (struct mddev *mddev, sector_t sectors, int raid_disks);
drivers/md/md.h:775: int (*check_reshape) (struct mddev *mddev);
drivers/md/md.h-776- int (*start_reshape) (struct mddev *mddev);
--
drivers/md/raid1.c=3441=static struct md_personality raid1_personality =
--
drivers/md/raid1.c-3460- .size = raid1_size,
drivers/md/raid1.c:3461: .check_reshape = raid1_reshape,
drivers/md/raid1.c-3462- .quiesce = raid1_quiesce,
--
drivers/md/raid10.c=4215=static void *raid10_takeover(struct mddev *mddev)
--
drivers/md/raid10.c-4236-
drivers/md/raid10.c:4237:static int raid10_check_reshape(struct mddev *mddev)
drivers/md/raid10.c-4238-{
--
drivers/md/raid10.c=5091=static struct md_personality raid10_personality =
--
drivers/md/raid10.c-5112- .takeover = raid10_takeover,
drivers/md/raid10.c:5113: .check_reshape = raid10_check_reshape,
drivers/md/raid10.c-5114- .start_reshape = raid10_start_reshape,
--
drivers/md/raid5.c=8562=static int check_stripe_cache(struct mddev *mddev)
--
drivers/md/raid5.c-8585-
drivers/md/raid5.c:8586:static int check_reshape(struct mddev *mddev)
drivers/md/raid5.c-8587-{
--
drivers/md/raid5.c=8941=static void *raid5_takeover_raid6(struct mddev *mddev)
--
drivers/md/raid5.c-8973-
drivers/md/raid5.c:8974:static int raid5_check_reshape(struct mddev *mddev)
drivers/md/raid5.c-8975-{
--
drivers/md/raid5.c-9010- }
drivers/md/raid5.c:9011: return check_reshape(mddev);
drivers/md/raid5.c-9012-}
drivers/md/raid5.c-9013-
drivers/md/raid5.c:9014:static int raid6_check_reshape(struct mddev *mddev)
drivers/md/raid5.c-9015-{
--
drivers/md/raid5.c-9030- /* They look valid */
drivers/md/raid5.c:9031: return check_reshape(mddev);
drivers/md/raid5.c-9032-}
--
drivers/md/raid5.c=9217=static struct md_personality raid6_personality =
--
drivers/md/raid5.c-9237- .size = raid5_size,
drivers/md/raid5.c:9238: .check_reshape = raid6_check_reshape,
drivers/md/raid5.c-9239- .start_reshape = raid5_start_reshape,
--
drivers/md/raid5.c=9250=static struct md_personality raid5_personality =
--
drivers/md/raid5.c-9270- .size = raid5_size,
drivers/md/raid5.c:9271: .check_reshape = raid5_check_reshape,
drivers/md/raid5.c-9272- .start_reshape = raid5_start_reshape,
--
drivers/md/raid5.c=9284=static struct md_personality raid4_personality =
--
drivers/md/raid5.c-9304- .size = raid5_size,
drivers/md/raid5.c:9305: .check_reshape = raid5_check_reshape,
drivers/md/raid5.c-9306- .start_reshape = raid5_start_reshape,
]
|
| 174/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 40947
output: 26
thoughts: 19
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Tracing the Execution Path of `start_reshape`**
Okay, so I need to understand the execution flow of `start_reshape`. My initial approach is always the same: let's find the call sites. Where is this function being invoked from within the codebase? I'll probably use my preferred tools β likely a grep or an IDE's search-for-references feature, depending on the project. This is basic, but essential: I need the call graph to establish context and understand the different scenarios where `start_reshape` comes into play. From there, I can analyze the arguments being passed and what the calling functions are doing with the results, to begin building a mental model of how `start_reshape` fits into the bigger picture.
|
| 175/4 |
2026/09/09 20:39 |
tool |
grepper |
0m
Args: map[Expression:start_reshape PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3301-
drivers/md/dm-raid.c:3302: if (rs->md.pers->start_reshape) {
drivers/md/dm-raid.c-3303- r = rs->md.pers->check_reshape(&rs->md);
--
drivers/md/dm-raid.c=3978=static void rs_update_sbs(struct raid_set *rs)
--
drivers/md/dm-raid.c-3995- */
drivers/md/dm-raid.c:3996:static int rs_start_reshape(struct raid_set *rs)
drivers/md/dm-raid.c-3997-{
--
drivers/md/dm-raid.c-4011- *
drivers/md/dm-raid.c:4012: * May as well already kick the reshape off so that * pers->start_reshape() becomes optional.
drivers/md/dm-raid.c-4013- */
--
drivers/md/dm-raid.c-4023- */
drivers/md/dm-raid.c:4024: if (pers->start_reshape) {
drivers/md/dm-raid.c:4025: r = pers->start_reshape(mddev);
drivers/md/dm-raid.c-4026- if (r) {
drivers/md/dm-raid.c:4027: rs->ti->error = "pers->start_reshape() failed";
drivers/md/dm-raid.c-4028- return r;
--
drivers/md/dm-raid.c=4042=static int raid_preresume(struct dm_target *ti)
--
drivers/md/dm-raid.c-4106- mddev_lock_nointr(mddev);
drivers/md/dm-raid.c:4107: r = rs_start_reshape(rs);
drivers/md/dm-raid.c-4108- mddev_unlock(mddev);
--
drivers/md/md.c=5240=EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
drivers/md/md.c-5241-
drivers/md/md.c:5242:static int mddev_start_reshape(struct mddev *mddev)
drivers/md/md.c-5243-{
--
drivers/md/md.c-5245-
drivers/md/md.c:5246: if (mddev->pers->start_reshape == NULL)
drivers/md/md.c-5247- return -EINVAL;
--
drivers/md/md.c-5252- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5253: ret = mddev->pers->start_reshape(mddev);
drivers/md/md.c-5254- if (ret)
--
drivers/md/md.c=5270=action_store(struct mddev *mddev, const char *page, size_t len)
--
drivers/md/md.c-5328- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5329: ret = mddev_start_reshape(mddev);
drivers/md/md.c-5330- if (ret)
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6736- if (mddev->reshape_position != MaxSector &&
drivers/md/md.c:6737: pers->start_reshape == NULL) {
drivers/md/md.c-6738- /* This personality cannot handle reshaping... */
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10886- * reshape is happening in the remote node, we need to
drivers/md/md.c:10887: * update reshape_position and call start_reshape.
drivers/md/md.c-10888- */
--
drivers/md/md.c-10891- mddev->pers->update_reshape_pos(mddev);
drivers/md/md.c:10892: if (mddev->pers->start_reshape)
drivers/md/md.c:10893: mddev->pers->start_reshape(mddev);
drivers/md/md.c-10894- } else if (test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) &&
--
drivers/md/md.h=750=struct md_personality
--
drivers/md/md.h-775- int (*check_reshape) (struct mddev *mddev);
drivers/md/md.h:776: int (*start_reshape) (struct mddev *mddev);
drivers/md/md.h-777- void (*finish_reshape) (struct mddev *mddev);
--
drivers/md/raid10.c=4303=static int calc_degraded(struct r10conf *conf)
--
drivers/md/raid10.c-4344-
drivers/md/raid10.c:4345:static int raid10_start_reshape(struct mddev *mddev)
drivers/md/raid10.c-4346-{
--
drivers/md/raid10.c=5091=static struct md_personality raid10_personality =
--
drivers/md/raid10.c-5113- .check_reshape = raid10_check_reshape,
drivers/md/raid10.c:5114: .start_reshape = raid10_start_reshape,
drivers/md/raid10.c-5115- .finish_reshape = raid10_finish_reshape,
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8634-
drivers/md/raid5.c:8635:static int raid5_start_reshape(struct mddev *mddev)
drivers/md/raid5.c-8636-{
--
drivers/md/raid5.c=9217=static struct md_personality raid6_personality =
--
drivers/md/raid5.c-9238- .check_reshape = raid6_check_reshape,
drivers/md/raid5.c:9239: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9240- .finish_reshape = raid5_finish_reshape,
--
drivers/md/raid5.c=9250=static struct md_personality raid5_personality =
--
drivers/md/raid5.c-9271- .check_reshape = raid5_check_reshape,
drivers/md/raid5.c:9272: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9273- .finish_reshape = raid5_finish_reshape,
--
drivers/md/raid5.c=9284=static struct md_personality raid4_personality =
--
drivers/md/raid5.c-9305- .check_reshape = raid5_check_reshape,
drivers/md/raid5.c:9306: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9307- .finish_reshape = raid5_finish_reshape,
]
|
| 176/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 43208
output: 38
thoughts: 28
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience and written in the first person:
**Diving into `raid5_start_reshape` in `raid5.c`**
Okay, so I'm digging into the RAID5 code again. Let's see... Specifically, I need to understand how the reshape process is initiated. I'm going to jump into the `raid5_start_reshape` function within `drivers/md/raid5.c`. My primary interest here is how the metadata is updated and how the reshaping process is kicked off. I need to refresh my memory on the interactions with the underlying device drivers and how we handle potential errors during this critical operation. Are there specific checks for things like device health, and what are the concurrency considerations? I want to make sure I understand the locking strategies implemented for reshaping and how these impact performance. I need to be sure that I remember how this interacts with the recovery process! I'll pay close attention to the data structures involved, like the RAID context and how the individual disks are signaled. Let's start by walking through the control flow.
|
| 177/4 |
2026/09/09 20:39 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:raid5_start_reshape]
Results: map[SourceCode:8635: static int raid5_start_reshape(struct mddev *mddev)
8636: {
8637: struct r5conf *conf = mddev->private;
8638: struct md_rdev *rdev;
8639: int spares = 0;
8640: int i;
8641: unsigned long flags;
8642:
8643: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
8644: return -EBUSY;
8645:
8646: if (!mddev->new_chunk_sectors)
8647: return -EINVAL;
8648:
8649: if (!check_stripe_cache(mddev))
8650: return -ENOSPC;
8651:
8652: if (has_failed(conf))
8653: return -EINVAL;
8654:
8655: /* raid5 can't handle concurrent reshape and recovery */
8656: if (mddev->resync_offset < MaxSector)
8657: return -EBUSY;
8658: for (i = 0; i < conf->raid_disks; i++)
8659: if (conf->disks[i].replacement)
8660: return -EBUSY;
8661:
8662: rdev_for_each(rdev, mddev) {
8663: if (!test_bit(In_sync, &rdev->flags)
8664: && !test_bit(Faulty, &rdev->flags))
8665: spares++;
8666: }
8667:
8668: if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
8669: /* Not enough devices even to make a degraded array
8670: * of that size
8671: */
8672: return -EINVAL;
8673:
8674: /* Refuse to reduce size of the array. Any reductions in
8675: * array size must be through explicit setting of array_size
8676: * attribute.
8677: */
8678: if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
8679: < mddev->array_sectors) {
8680: pr_warn("md/raid:%s: array size must be reduced before number of disks\n",
8681: mdname(mddev));
8682: return -EINVAL;
8683: }
8684: if (md_bitmap_enabled(mddev, false) &&
8685: mddev->bitmap_id == ID_LLBITMAP) {
8686: i = mddev->bitmap_ops->resize(mddev, mddev->dev_sectors, 0);
8687: if (i)
8688: return i;
8689: }
8690:
8691: atomic_set(&conf->reshape_stripes, 0);
8692: spin_lock_irq(&conf->device_lock);
8693: write_seqcount_begin(&conf->gen_lock);
8694: conf->previous_raid_disks = conf->raid_disks;
8695: conf->raid_disks += mddev->delta_disks;
8696: conf->prev_chunk_sectors = conf->chunk_sectors;
8697: conf->chunk_sectors = mddev->new_chunk_sectors;
8698: conf->prev_algo = conf->algorithm;
8699: conf->algorithm = mddev->new_layout;
8700: conf->generation++;
8701: /* Code that selects data_offset needs to see the generation update
8702: * if reshape_progress has been set - so a memory barrier needed.
8703: */
8704: smp_mb();
8705: if (mddev->reshape_backwards)
8706: conf->reshape_progress = raid5_size(mddev, 0, 0);
8707: else
8708: conf->reshape_progress = 0;
8709: conf->reshape_safe = conf->reshape_progress;
8710: write_seqcount_end(&conf->gen_lock);
8711: spin_unlock_irq(&conf->device_lock);
8712:
8713: /* Now make sure any requests that proceeded on the assumption
8714: * the reshape wasn't running - like Discard or Read - have
8715: * completed.
8716: */
8717: raid5_quiesce(mddev, true);
8718: raid5_quiesce(mddev, false);
8719:
8720: /* Add some new drives, as many as will fit.
8721: * We know there are enough to make the newly sized array work.
8722: * Don't add devices if we are reducing the number of
8723: * devices in the array. This is because it is not possible
8724: * to correctly record the "partially reconstructed" state of
8725: * such devices during the reshape and confusion could result.
8726: */
8727: if (mddev->delta_disks >= 0) {
8728: rdev_for_each(rdev, mddev)
8729: if (rdev->raid_disk < 0 &&
8730: !test_bit(Faulty, &rdev->flags)) {
8731: if (raid5_add_disk(mddev, rdev) == 0) {
8732: if (rdev->raid_disk
8733: >= conf->previous_raid_disks)
8734: set_bit(In_sync, &rdev->flags);
8735: else
8736: WRITE_ONCE(rdev->recovery_offset, 0);
8737:
8738: /* Failure here is OK */
8739: sysfs_link_rdev(mddev, rdev);
8740: }
8741: } else if (rdev->raid_disk >= conf->previous_raid_disks
8742: && !test_bit(Faulty, &rdev->flags)) {
8743: /* This is a spare that was manually added */
8744: set_bit(In_sync, &rdev->flags);
8745: }
8746:
8747: /* When a reshape changes the number of devices,
8748: * ->degraded is measured against the larger of the
8749: * pre and post number of devices.
8750: */
8751: spin_lock_irqsave(&conf->device_lock, flags);
8752: mddev->degraded = raid5_calc_degraded(conf);
8753: spin_unlock_irqrestore(&conf->device_lock, flags);
8754: }
8755: mddev->raid_disks = conf->raid_disks;
8756: mddev->reshape_position = conf->reshape_progress;
8757: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
8758:
8759: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
8760: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
8761: clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
8762: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
8763: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
8764: conf->reshape_checkpoint = jiffies;
8765: md_new_event();
8766: return 0;
8767: }
SourceFile:drivers/md/raid5.c]
|
| 178/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 45729
output: 26
thoughts: 1010
Thoughts: **Analyzing Potential Data Loss in MD Reshape Operations**
Okay, let's break this down. I'm looking at a critical section of the MD code, specifically concerning reshape operations and how they interact with array stopping/detachment. I'm focusing on scenarios where a reshape *might* have been initiated but hasn't fully completed before the array is stopped, and whether this can lead to data inconsistency or loss.
My initial thought is to examine the assignments in `raid5_start_reshape()`. Line 8756 clearly shows `mddev->reshape_position` gets set, and *until* that point, it will be at `MaxSector`. I'm concerned about what happens when an array is halted *before* `start_reshape()` runs. I already know that `mddev->delta_disks`, `mddev->new_chunk_sectors` and `mddev->new_layout` can be set independently prior to a reshape, for example in `update_raid_disks()`, `chunk_size_store`, and `layout_store`.
Now, if we stop the array (e.g., `mode == 2` or `md_stop()`), `__md_stop()` is called. This function does a lot of cleanup, including freeing the `mddev->pers` and the associated private data through a call to `pers->free()`. Here's the key: if `mddev->reshape_position` is still equal to `MaxSector`, then the reshape operation *never* really started. However, the other values I mentioned, like `delta_disks`, `new_chunk_sectors`, and `new_layout` could still be *set* and non-zero. That is the source of my concern.
The question then becomes: where are these "new" values coming from, and how are they handled if a reshape fails to start or is interrupted? I'm now drilling down into `level_store` to confirm that the takeover process correctly handles these values, particularly how it sets `mddev->new_level`, and what happens if the takeover fails. The key point here is that `level_store` immediately updates the `mddev`'s state variables if the takeover *succeeds*. If the takeover *fails*, it sets a few of the `new_*` values to existing values.
However, a key point of concern is that `level_store` and other functions might set these "new" values or leave them dirty.
So, I need to do a broader search to ensure no other code paths inadvertently modify or use these variables, particularly `new_level`, `new_layout`, `new_chunk_sectors`, `delta_disks`, and `reshape_backwards`, before the reshape is initiated. I will now `grep` for all assignments to these variables.
|
| 179/4 |
2026/09/09 20:39 |
tool |
grepper |
0m
Args: map[Expression:new_level PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-cache-policy-smq.c=482=static void q_requeue(struct queue *q, struct entry *e, unsigned int extra_levels,
--
drivers/md/dm-cache-policy-smq.c-486- unsigned int sentinels_passed = 0;
drivers/md/dm-cache-policy-smq.c:487: unsigned int new_level = min(q->nr_levels - 1u, e->level + extra_levels);
drivers/md/dm-cache-policy-smq.c-488-
--
drivers/md/dm-cache-policy-smq.c-490- if (extra_levels && (e->level < q->nr_levels - 1u)) {
drivers/md/dm-cache-policy-smq.c:491: for (de = l_head(q->es, q->qs + new_level); de && de->sentinel; de = l_next(q->es, de))
drivers/md/dm-cache-policy-smq.c-492- sentinels_passed++;
--
drivers/md/dm-cache-policy-smq.c-515- q_del(q, e);
drivers/md/dm-cache-policy-smq.c:516: e->level = new_level;
drivers/md/dm-cache-policy-smq.c-517- q_push(q, e);
--
drivers/md/dm-raid.c=224=struct rs_layout {
drivers/md/dm-raid.c:225: int new_level;
drivers/md/dm-raid.c-226- int new_layout;
--
drivers/md/dm-raid.c=261=static void rs_config_backup(struct raid_set *rs, struct rs_layout *l)
--
drivers/md/dm-raid.c-264-
drivers/md/dm-raid.c:265: l->new_level = mddev->new_level;
drivers/md/dm-raid.c-266- l->new_layout = mddev->new_layout;
--
drivers/md/dm-raid.c=270=static void rs_config_restore(struct raid_set *rs, struct rs_layout *l)
--
drivers/md/dm-raid.c-273-
drivers/md/dm-raid.c:274: mddev->new_level = l->new_level;
drivers/md/dm-raid.c-275- mddev->new_layout = l->new_layout;
--
drivers/md/dm-raid.c=712=static void rs_set_cur(struct raid_set *rs)
--
drivers/md/dm-raid.c-715-
drivers/md/dm-raid.c:716: mddev->new_level = mddev->level;
drivers/md/dm-raid.c-717- mddev->new_layout = mddev->layout;
--
drivers/md/dm-raid.c=725=static void rs_set_new(struct raid_set *rs)
--
drivers/md/dm-raid.c-728-
drivers/md/dm-raid.c:729: mddev->level = mddev->new_level;
drivers/md/dm-raid.c-730- mddev->layout = mddev->new_layout;
--
drivers/md/dm-raid.c=736=static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type,
--
drivers/md/dm-raid.c-766- rs->md.level = raid_type->level;
drivers/md/dm-raid.c:767: rs->md.new_level = rs->md.level;
drivers/md/dm-raid.c-768- rs->md.layout = raid_type->algorithm;
--
drivers/md/dm-raid.c=1743=static int rs_check_takeover(struct raid_set *rs)
--
drivers/md/dm-raid.c-1760- /* raid0 -> raid1/5 with one disk */
drivers/md/dm-raid.c:1761: if ((mddev->new_level == 1 || mddev->new_level == 5) &&
drivers/md/dm-raid.c-1762- mddev->raid_disks == 1)
--
drivers/md/dm-raid.c-1765- /* raid0 -> raid10 */
drivers/md/dm-raid.c:1766: if (mddev->new_level == 10 &&
drivers/md/dm-raid.c-1767- !(rs->raid_disks % mddev->raid_disks))
--
drivers/md/dm-raid.c-1770- /* raid0 with multiple disks -> raid4/5/6 */
drivers/md/dm-raid.c:1771: if (__within_range(mddev->new_level, 4, 6) &&
drivers/md/dm-raid.c-1772- mddev->new_layout == ALGORITHM_PARITY_N &&
--
drivers/md/dm-raid.c-1785- /* raid10* -> raid0 */
drivers/md/dm-raid.c:1786: if (mddev->new_level == 0) {
drivers/md/dm-raid.c-1787- /* Can takeover raid10_near with raid disks divisable by data copies! */
--
drivers/md/dm-raid.c-1803- /* raid10_{near,far} -> raid1 */
drivers/md/dm-raid.c:1804: if (mddev->new_level == 1 &&
drivers/md/dm-raid.c-1805- max(near_copies, __raid10_far_copies(mddev->layout)) == mddev->raid_disks)
--
drivers/md/dm-raid.c-1808- /* raid10_{near,far} with 2 disks -> raid4/5 */
drivers/md/dm-raid.c:1809: if (__within_range(mddev->new_level, 4, 5) &&
drivers/md/dm-raid.c-1810- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1815- /* raid1 with 2 disks -> raid4/5 */
drivers/md/dm-raid.c:1816: if (__within_range(mddev->new_level, 4, 5) &&
drivers/md/dm-raid.c-1817- mddev->raid_disks == 2) {
--
drivers/md/dm-raid.c-1822- /* raid1 -> raid0 */
drivers/md/dm-raid.c:1823: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1824- mddev->raid_disks == 1)
--
drivers/md/dm-raid.c-1827- /* raid1 -> raid10 */
drivers/md/dm-raid.c:1828: if (mddev->new_level == 10)
drivers/md/dm-raid.c-1829- return 0;
--
drivers/md/dm-raid.c-1833- /* raid4 -> raid0 */
drivers/md/dm-raid.c:1834: if (mddev->new_level == 0)
drivers/md/dm-raid.c-1835- return 0;
--
drivers/md/dm-raid.c-1837- /* raid4 -> raid1/5 with 2 disks */
drivers/md/dm-raid.c:1838: if ((mddev->new_level == 1 || mddev->new_level == 5) &&
drivers/md/dm-raid.c-1839- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1842- /* raid4 -> raid5/6 with parity N */
drivers/md/dm-raid.c:1843: if (__within_range(mddev->new_level, 5, 6) &&
drivers/md/dm-raid.c-1844- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1849- /* raid5 with parity N -> raid0 */
drivers/md/dm-raid.c:1850: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1851- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1854- /* raid5 with parity N -> raid4 */
drivers/md/dm-raid.c:1855: if (mddev->new_level == 4 &&
drivers/md/dm-raid.c-1856- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1859- /* raid5 with 2 disks -> raid1/4/10 */
drivers/md/dm-raid.c:1860: if ((mddev->new_level == 1 || mddev->new_level == 4 || mddev->new_level == 10) &&
drivers/md/dm-raid.c-1861- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1864- /* raid5_* -> raid6_*_6 with Q-Syndrome N (e.g. raid5_ra -> raid6_ra_6 */
drivers/md/dm-raid.c:1865: if (mddev->new_level == 6 &&
drivers/md/dm-raid.c-1866- ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) ||
--
drivers/md/dm-raid.c-1872- /* raid6 with parity N -> raid0 */
drivers/md/dm-raid.c:1873: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1874- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1877- /* raid6 with parity N -> raid4 */
drivers/md/dm-raid.c:1878: if (mddev->new_level == 4 &&
drivers/md/dm-raid.c-1879- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1882- /* raid6_*_n with Q-Syndrome N -> raid5_* */
drivers/md/dm-raid.c:1883: if (mddev->new_level == 5 &&
drivers/md/dm-raid.c-1884- ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) ||
--
drivers/md/dm-raid.c=1898=static bool rs_takeover_requested(struct raid_set *rs)
drivers/md/dm-raid.c-1899-{
drivers/md/dm-raid.c:1900: return rs->md.new_level != rs->md.level;
drivers/md/dm-raid.c-1901-}
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2000- */
drivers/md/dm-raid.c:2001: __le32 new_level;
drivers/md/dm-raid.c-2002- __le32 new_layout;
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2156- */
drivers/md/dm-raid.c:2157: sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/dm-raid.c-2158- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2268- /* Superblock is authoritative wrt given raid set layout! */
drivers/md/dm-raid.c:2269: mddev->new_level = le32_to_cpu(sb->new_level);
drivers/md/dm-raid.c-2270- mddev->new_layout = le32_to_cpu(sb->new_layout);
--
drivers/md/dm-raid.c-2298- struct raid_type *rt_cur = get_raid_type_by_ll(mddev->level, mddev->layout);
drivers/md/dm-raid.c:2299: struct raid_type *rt_new = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-2300-
--
drivers/md/dm-raid.c=3526=static void raid_status(struct dm_target *ti, status_type_t type,
--
drivers/md/dm-raid.c-3543- /* *Should* always succeed */
drivers/md/dm-raid.c:3544: rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-3545- if (!rt)
--
drivers/md/dm-raid.c-3692- case STATUSTYPE_IMA:
drivers/md/dm-raid.c:3693: rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-3694- if (!rt)
--
drivers/md/md-llbitmap.c=1431=static int llbitmap_resize(struct mddev *mddev, sector_t blocks, int chunksize)
--
drivers/md/md-llbitmap.c-1448-
drivers/md/md-llbitmap.c:1449: reshape = mddev->delta_disks || mddev->new_level != mddev->level ||
drivers/md/md-llbitmap.c-1450- mddev->new_layout != mddev->layout ||
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
drivers/md/md.c:1514: mddev->new_level = sb->new_level;
drivers/md/md.c-1515- mddev->new_layout = sb->new_layout;
--
drivers/md/md.c-1521- mddev->delta_disks = 0;
drivers/md/md.c:1522: mddev->new_level = mddev->level;
drivers/md/md.c-1523- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1653- sb->reshape_position = mddev->reshape_position;
drivers/md/md.c:1654: sb->new_level = mddev->new_level;
drivers/md/md.c-1655- sb->delta_disks = mddev->delta_disks;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/md.c:2057: mddev->new_level = le32_to_cpu(sb->new_level);
drivers/md/md.c-2058- mddev->new_layout = le32_to_cpu(sb->new_layout);
--
drivers/md/md.c-2067- mddev->delta_disks = 0;
drivers/md/md.c:2068: mddev->new_level = mddev->level;
drivers/md/md.c-2069- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2268- sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/md.c:2269: sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/md.c-2270- sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4135- if (IS_ERR(priv)) {
drivers/md/md.c:4136: mddev->new_level = mddev->level;
drivers/md/md.c-4137- mddev->new_layout = mddev->layout;
--
drivers/md/md.c-4157- strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
drivers/md/md.c:4158: mddev->level = mddev->new_level;
drivers/md/md.c-4159- mddev->layout = mddev->new_layout;
--
drivers/md/md.c=4248=static ssize_t
drivers/md/md.c:4249:new_level_show(struct mddev *mddev, char *page)
drivers/md/md.c-4250-{
drivers/md/md.c:4251: return sprintf(page, "%d\n", mddev->new_level);
drivers/md/md.c-4252-}
--
drivers/md/md.c=4254=static ssize_t
drivers/md/md.c:4255:new_level_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-4256-{
--
drivers/md/md.c-4266-
drivers/md/md.c:4267: mddev->new_level = n;
drivers/md/md.c-4268- md_update_sb(mddev, 1);
--
drivers/md/md.c-4272-}
drivers/md/md.c:4273:static struct md_sysfs_entry md_new_level =
drivers/md/md.c:4274:__ATTR(new_level, 0664, new_level_show, new_level_store);
drivers/md/md.c-4275-
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
drivers/md/md.c:5741: mddev->new_level = mddev->level;
drivers/md/md.c-5742- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=6063=static struct attribute *md_default_attrs[] = {
drivers/md/md.c-6064- &md_level.attr,
drivers/md/md.c:6065: &md_new_level.attr,
drivers/md/md.c-6066- &md_bitmap_type.attr,
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6731- mddev->level = pers->head.id;
drivers/md/md.c:6732: mddev->new_level = pers->head.id;
drivers/md/md.c-6733- }
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
drivers/md/md.c:7009: mddev->new_level = LEVEL_NONE;
drivers/md/md.c-7010- mddev->new_layout = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7971-
drivers/md/md.c:7972: mddev->new_level = mddev->level;
drivers/md/md.c-7973- mddev->new_chunk_sectors = mddev->chunk_sectors;
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-467- sector_t reshape_position;
drivers/md/md.h:468: int delta_disks, new_level, new_layout;
drivers/md/md.h-469- int new_chunk_sectors;
--
drivers/md/raid0.c=646=static void *raid0_takeover_raid45(struct mddev *mddev)
--
drivers/md/raid0.c-668- /* Set new parameters */
drivers/md/raid0.c:669: mddev->new_level = 0;
drivers/md/raid0.c-670- mddev->new_layout = 0;
--
drivers/md/raid0.c=683=static void *raid0_takeover_raid10(struct mddev *mddev)
--
drivers/md/raid0.c-710- /* Set new parameters */
drivers/md/raid0.c:711: mddev->new_level = 0;
drivers/md/raid0.c-712- mddev->new_layout = 0;
--
drivers/md/raid0.c=725=static void *raid0_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid0.c-753- /* Set new parameters */
drivers/md/raid0.c:754: mddev->new_level = 0;
drivers/md/raid0.c-755- mddev->new_layout = 0;
--
drivers/md/raid1.c=3315=static int raid1_reshape(struct mddev *mddev)
--
drivers/md/raid1.c-3338- mddev->layout != mddev->new_layout ||
drivers/md/raid1.c:3339: mddev->level != mddev->new_level) {
drivers/md/raid1.c-3340- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid1.c-3341- mddev->new_layout = mddev->layout;
drivers/md/raid1.c:3342: mddev->new_level = mddev->level;
drivers/md/raid1.c-3343- return -EINVAL;
--
drivers/md/raid1.c=3421=static void *raid1_takeover(struct mddev *mddev)
--
drivers/md/raid1.c-3427- struct r1conf *conf;
drivers/md/raid1.c:3428: mddev->new_level = 1;
drivers/md/raid1.c-3429- mddev->new_layout = 0;
--
drivers/md/raid10.c=4180=static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
--
drivers/md/raid10.c-4192- /* Set new parameters */
drivers/md/raid10.c:4193: mddev->new_level = 10;
drivers/md/raid10.c-4194- /* new layout: far_copies = 1, near_copies = 2 */
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7644-
drivers/md/raid5.c:7645: if (mddev->new_level != 5
drivers/md/raid5.c:7646: && mddev->new_level != 4
drivers/md/raid5.c:7647: && mddev->new_level != 6) {
drivers/md/raid5.c-7648- pr_warn("md/raid:%s: raid level not set to 4/5/6 (%d)\n",
drivers/md/raid5.c:7649: mdname(mddev), mddev->new_level);
drivers/md/raid5.c-7650- return ERR_PTR(-EIO);
drivers/md/raid5.c-7651- }
drivers/md/raid5.c:7652: if ((mddev->new_level == 5
drivers/md/raid5.c-7653- && !algorithm_valid_raid5(mddev->new_layout)) ||
drivers/md/raid5.c:7654: (mddev->new_level == 6
drivers/md/raid5.c-7655- && !algorithm_valid_raid6(mddev->new_layout))) {
--
drivers/md/raid5.c-7659- }
drivers/md/raid5.c:7660: if (mddev->new_level == 6 && mddev->raid_disks < 4) {
drivers/md/raid5.c-7661- pr_warn("md/raid:%s: not enough configured devices (%d, minimum 4)\n",
--
drivers/md/raid5.c-7774-
drivers/md/raid5.c:7775: conf->level = mddev->new_level;
drivers/md/raid5.c-7776- conf->chunk_sectors = mddev->new_chunk_sectors;
--
drivers/md/raid5.c-7808-
drivers/md/raid5.c:7809: conf->level = mddev->new_level;
drivers/md/raid5.c-7810- if (conf->level == 6) {
--
drivers/md/raid5.c-7870-
drivers/md/raid5.c:7871: sprintf(pers_name, "raid%d", mddev->new_level);
drivers/md/raid5.c-7872- rcu_assign_pointer(conf->thread,
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8057-
drivers/md/raid5.c:8058: if (mddev->new_level != mddev->level) {
drivers/md/raid5.c-8059- pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",
--
drivers/md/raid5.c-8113- } else {
drivers/md/raid5.c:8114: BUG_ON(mddev->level != mddev->new_level);
drivers/md/raid5.c-8115- BUG_ON(mddev->layout != mddev->new_layout);
--
drivers/md/raid5.c=8883=static void *raid45_takeover_raid0(struct mddev *mddev, int level)
--
drivers/md/raid5.c-8897- mddev->dev_sectors = sectors;
drivers/md/raid5.c:8898: mddev->new_level = level;
drivers/md/raid5.c-8899- mddev->new_layout = ALGORITHM_PARITY_N;
--
drivers/md/raid5.c=8909=static void *raid5_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid5.c-8929-
drivers/md/raid5.c:8930: mddev->new_level = 5;
drivers/md/raid5.c-8931- mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
--
drivers/md/raid5.c=8941=static void *raid5_takeover_raid6(struct mddev *mddev)
--
drivers/md/raid5.c-8966- }
drivers/md/raid5.c:8967: mddev->new_level = 5;
drivers/md/raid5.c-8968- mddev->new_layout = new_layout;
--
drivers/md/raid5.c=9034=static void *raid5_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9047- mddev->new_layout = ALGORITHM_PARITY_N;
drivers/md/raid5.c:9048: mddev->new_level = 5;
drivers/md/raid5.c-9049- return setup_conf(mddev);
--
drivers/md/raid5.c=9057=static void *raid4_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9067- mddev->new_layout = 0;
drivers/md/raid5.c:9068: mddev->new_level = 4;
drivers/md/raid5.c-9069- return setup_conf(mddev);
--
drivers/md/raid5.c=9076=static void *raid6_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9114- }
drivers/md/raid5.c:9115: mddev->new_level = 6;
drivers/md/raid5.c-9116- mddev->new_layout = new_layout;
]
|
| 180/4 |
2026/09/09 20:39 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 55482
output: 37
thoughts: 3959
Thoughts: **Analyzing MD RAID Stale Reshape Parameters**
Alright, let's break this down systematically. I'm focusing on the MD RAID code, specifically how reshape operations and array stopping interact. I've been tracing the flow of parameters related to reshape, and the key issue seems to be stale values left in the `mddev` structure.
First, I examined `new_level_store` and `reshape_position_store` to see how new levels and reshape positions are handled. My initial focus was on the exact fields cleared in `reshape_position_store`. This led me to identify the following crucial fields: `mddev->delta_disks`, `mddev->reshape_backwards`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors`. These are cleared in several places as well.
Then, I looked at how these values are handled during array validation (`super_1_validate`, `super_90_validate`) and error handling (`raid1_reshape`, `level_store`). The most interesting point here is in `level_store`, where the code checks and potentially adjusts `mddev->raid_disks`. I began to question whether this adjustment is always correct and when it's necessary.
Next, I looked at the function `update_raid_disks`. This function updates delta_disks if raid_disks is different. I confirmed that `mddev->raid_disks` is *not* modified in this function. This made me think about why `mddev->raid_disks` *does* change. I checked the `takeover` functions. I analyzed how `mddev->raid_disks` is modified in the `takeover` functions and then rolled back using `mddev->raid_disks -= mddev->delta_disks`. That means that if the takeover fails, then `mddev->raid_disks` is corrected.
Then I investigated `raid_disks_store`. In `raid_disks_store` I saw that when there is a personality assigned and `reshape_position` is not `MaxSector`, then `update_raid_disks()` is called. Then I examined when the reshape actually begins and `mddev->raid_disks` is changed in `raid5_start_reshape`. Before this point (`reshape_position` is `MaxSector`), `mddev->raid_disks` is the original number, and `delta_disks` indicates the *pending* change. Thus, if the code sets the other fields: `mddev->delta_disks = 0; mddev->reshape_backwards = 0; mddev->new_level = mddev->level; mddev->new_layout = mddev->layout; mddev->new_chunk_sectors = mddev->chunk_sectors;` then there's no harm and there will be no mismatch in the number of disks or any of the values.
Next, I noted the behavior of `raid_disks_store` when there's no personality attached (`mddev->pers == NULL`). In this case, when `reshape_position == MaxSector`, writing to `raid_disks` *directly* sets `mddev->raid_disks`, which matches! This means there's no `delta_disks`. Also, when the array starts (`md_run`), there is a check for the values to match: `BUG_ON(mddev->level != mddev->new_level); BUG_ON(mddev->layout != mddev->new_layout); BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors); BUG_ON(mddev->delta_disks != 0);`.
Then I analyzed `layout_store`, and `chunk_size_store`. When the array is not running or no reshape is happening (`mddev->pers == NULL` and `reshape_position == MaxSector`), the code always keeps both current and new parameters equal.
This is the key. The problem arises when the array is stopped after parameters have been set for a reshape (`mddev->pers != NULL`, but `mddev->reshape_position` is still `MaxSector`). The pending parameters (`delta_disks`, `new_layout`, `new_chunk_sectors`, etc.) remain set in `mddev`. Then when the array is restarted (`md_run`), the personality is attached again, and `raid5_run` is called, those leftover stale parameters trigger the `BUG_ON` checks.
The crash report confirms that `delta_disks = 1` which is left over from changing `raid_disks` during an active reshape. I noted that changing `chunk_size` would also trigger the same
|
| 181/4 |
2026/09/09 20:40 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop_writes]
Results: map[SourceCode:7032: static void __md_stop_writes(struct mddev *mddev)
7033: {
7034: timer_delete_sync(&mddev->safemode_timer);
7035:
7036: if (md_is_rdwr(mddev) || !mddev_is_dm(mddev)) {
7037: if (mddev->pers && mddev->pers->quiesce) {
7038: mddev->pers->quiesce(mddev, 1);
7039: mddev->pers->quiesce(mddev, 0);
7040: }
7041:
7042: if (md_bitmap_enabled(mddev, true))
7043: mddev->bitmap_ops->flush(mddev);
7044: }
7045:
7046: if (md_is_rdwr(mddev) &&
7047: ((!mddev->in_sync && !mddev_is_clustered(mddev)) ||
7048: mddev->sb_flags)) {
7049: /* mark array as shutdown cleanly */
7050: if (!mddev_is_clustered(mddev))
7051: mddev->in_sync = 1;
7052: md_update_sb(mddev, 1);
7053: }
7054: /* disable policy to guarantee rdevs free resources for serialization */
7055: clear_bit(MD_SERIALIZE_POLICY, &mddev->flags);
7056: mddev_destroy_serial_pool(mddev, NULL);
7057: }
SourceFile:drivers/md/md.c]
|
| 182/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 60979
output: 36
thoughts: 211
Thoughts: **Analyzing the Shutdown Procedure of a RAID Array**
Okay, so I'm diving into the `__md_stop_writes()` function, trying to understand the final shutdown sequence for a RAID array. The code snippet specifically catches my attention because it seems to be ensuring a clean shutdown, especially under certain conditions: when the array is read-write and either not fully synchronized, or flagged for a shutdown. I'm wondering about the critical function call `md_update_sb(mddev, 1)`. Specifically, does this function actually *write* important metadata to disk, like `delta_disks` or `new_layout`? These fields are crucial for array reconfiguration.
To confirm my hunch, I need to trace this function and understand its behavior. I should go look at the function `super_1_sync()` and `super_90_sync()` and see if they reveal anything about what is getting written out to the superblock. I'll focus my attention around lines 2260-2280 in `drivers/md/md.c` to look at this function.
|
| 183/4 |
2026/09/09 20:40 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:2255 LineCount:40]
Results: map[Contents:2255: cpu_to_le32(MD_FEATURE_RECOVERY_BITMAP);
2256: }
2257: /* Note: recovery_offset and journal_tail share space */
2258: if (test_bit(Journal, &rdev->flags))
2259: sb->journal_tail = cpu_to_le64(rdev->journal_tail);
2260: if (test_bit(Replacement, &rdev->flags))
2261: sb->feature_map |=
2262: cpu_to_le32(MD_FEATURE_REPLACEMENT);
2263:
2264: if (mddev->reshape_position != MaxSector) {
2265: sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
2267: sb->new_layout = cpu_to_le32(mddev->new_layout);
2268: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
2269: sb->new_level = cpu_to_le32(mddev->new_level);
2270: sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
2271: if (mddev->delta_disks == 0 &&
2272: mddev->reshape_backwards)
2273: sb->feature_map
2274: |= cpu_to_le32(MD_FEATURE_RESHAPE_BACKWARDS);
2275: if (rdev->new_data_offset != rdev->data_offset) {
2276: sb->feature_map
2277: |= cpu_to_le32(MD_FEATURE_NEW_OFFSET);
2278: sb->new_offset = cpu_to_le32((__u32)(rdev->new_data_offset
2279: - rdev->data_offset));
2280: }
2281: }
2282:
2283: if (mddev_is_clustered(mddev))
2284: sb->feature_map |= cpu_to_le32(MD_FEATURE_CLUSTERED);
2285:
2286: if (rdev->badblocks.count == 0)
2287: /* Nothing to do for bad blocks*/ ;
2288: else if (sb->bblog_offset == 0)
2289: /* Cannot record bad blocks on this device */
2290: md_error(mddev, rdev);
2291: else {
2292: struct badblocks *bb = &rdev->badblocks;
2293: __le64 *bbp = (__le64 *)page_address(rdev->bb_page);
2294: u64 *p = bb->page;
]
|
| 184/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 62260
output: 36
thoughts: 242
Thoughts: **Analyzing Superblock Updates During Reshape**
Okay, let's break down this superblock update, specifically focusing on the reshape process. Examining `super_1_sync`, my initial observation is that a specific set of superblock fields are only updated when a reshape operation is *active*. The code explicitly checks if `mddev->reshape_position` is not equal to `MaxSector`. If this condition holds, indicating an ongoing reshape, the superblock fields are updated. It specifically writes `MD_FEATURE_RESHAPE_ACTIVE`, updates `new_layout`, `delta_disks`, `new_level`, and `new_chunk_sectors` in the superblock. This conditional update suggests an optimization β only modifying these specific fields when a reshape is actually in progress. This makes sense from a performance standpoint. It seems like it prevents needless writes when the reshape hasn't started or is complete. Let's make sure that's the only place these writes are happening. I will check the `super_90_sync()` routine next to be sure.
|
| 185/4 |
2026/09/09 20:40 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:1645 LineCount:25]
Results: map[Contents:1645: sb->state = 0;
1646: sb->events_hi = (mddev->events>>32);
1647: sb->events_lo = (u32)mddev->events;
1648:
1649: if (mddev->reshape_position == MaxSector)
1650: sb->minor_version = 90;
1651: else {
1652: sb->minor_version = 91;
1653: sb->reshape_position = mddev->reshape_position;
1654: sb->new_level = mddev->new_level;
1655: sb->delta_disks = mddev->delta_disks;
1656: sb->new_layout = mddev->new_layout;
1657: sb->new_chunk = mddev->new_chunk_sectors << 9;
1658: }
1659: mddev->minor_version = sb->minor_version;
1660: if (mddev->in_sync)
1661: {
1662: sb->recovery_cp = mddev->resync_offset;
1663: sb->cp_events_hi = (mddev->events>>32);
1664: sb->cp_events_lo = (u32)mddev->events;
1665: if (mddev->resync_offset == MaxSector)
1666: sb->state = (1<< MD_SB_CLEAN);
1667: } else
1668: sb->recovery_cp = 0;
1669:
]
|
| 186/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 63199
output: 26
thoughts: 1614
Thoughts: **Reshape Parameter Persistence During Array Stop/Start**
Okay, so I'm digging into how reshape parameters are handled during array stop and start, particularly in the context of the RAID code. My key concern revolves around the persistence of these parameters, especially when an array is stopped and restarted without a full cleanup.
Initially, I'm observing that within `super_90_sync()` and other similar functions, the on-disk format only considers a reshape active if `mddev->reshape_position` is not `MaxSector`. If it *is* equal to `MaxSector`, then the reshape parameters in `mddev` reflect an in-memory pending state associated with the active array session.
Now, consider the array being stopped. If it's "disassembled" (`mode == 0`), `export_array(mddev)` and `md_clean(mddev)` are invoked. In `md_clean()`, all of the reshape-related variables (e.g. `delta_disks`, `new_level`, etc.) are explicitly cleared. When the array is reassembled later, either `super_1_validate()` or `super_90_validate()` reads the superblock. If `MD_FEATURE_RESHAPE_ACTIVE` is set in the superblock, the reshape parameters are populated from the disk. Otherwise, they're reset to their current array values. So, stopping via disassembly ensures a clean slate, and reshape parameters are *only* sourced from the superblock if a reshape was actively in progress.
However, a different scenario emerges with an "inactive" stop (`mode == 2`) or a stop via `md_stop()`. In these cases, `md_clean(mddev)` is *not* called. Instead, only `__md_stop_writes()` and `__md_stop()` are executed. The `mddev` structure is preserved in memory (although its `pers` pointer is cleared). This means that if `mddev->reshape_position` was `MaxSector` at the stop time, any pending reshape parameters (e.g. `delta_disks`, `new_level`) were *never* cleared! This is a critical point. When the array is restarted (e.g. `array_state` set to active or read-only), `md_run()` is called, and subsequently, `raid5_run()`. `raid5_run()` checks `mddev->reshape_position`. If it sees it as `MaxSector`, then it's going to hit a `BUG_ON()` because the expectation is that the reshape parameters will have been cleared in this case.
But wait, let's explore the case where `mddev->reshape_position != MaxSector` *during* the stop sequence. If a reshape is actively in progress, stopping the array to "inactive" means that `__md_stop_writes()` is called, and then `super_1_sync()` is invoked. Since `mddev->reshape_position != MaxSector`, the current reshape parameters are written to the superblock. So, they *persist*. Then, `__md_stop()` runs. Because of the proposed fix, if `mddev->reshape_position` is NOT `MaxSector`, then none of the parameters are cleared. Thus, the reshape parameters are PRESERVED! When the user sets the state to `active`, then the reshape CONTINUES!
On the other hand, if the array was completely stopped (with `mode == 0`), then `export_array()` and `md_clean()` run. `super_1_validate()` reads the superblock: `sb->feature_map & MD_FEATURE_RESHAPE_ACTIVE` IS true, so it then populates the reshape parameters from the superblock, and the reshape continues!
So, the issue isn't about active reshapes. Itβs when a *pending* reshape (indicated by `mddev->reshape_position == MaxSector`) is interrupted by an "inactive" or `md_stop()` call. It appears that the pending reshape parameters are *not* reliably cleared in this scenario, leading to potential inconsistency and triggering the `BUG_ON()`. This could arise through a call to `md_stop()` from `dm-raid` and it needs to be understood if this is the case. I need to check where `md_stop` is being called within that code.
|
| 187/4 |
2026/09/09 20:40 |
tool |
grepper |
0m
Args: map[Expression:md_stop PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3318-bad_unlock:
drivers/md/dm-raid.c:3319: md_stop(&rs->md);
drivers/md/dm-raid.c-3320- mddev_unlock(&rs->md);
--
drivers/md/dm-raid.c=3327=static void raid_dtr(struct dm_target *ti)
--
drivers/md/dm-raid.c-3331- mddev_lock_nointr(&rs->md);
drivers/md/dm-raid.c:3332: md_stop(&rs->md);
drivers/md/dm-raid.c-3333- rs->md.dm_gendisk = NULL;
--
drivers/md/dm-raid.c=3857=static void raid_postsuspend(struct dm_target *ti)
--
drivers/md/dm-raid.c-3866- */
drivers/md/dm-raid.c:3867: md_stop_writes(&rs->md);
drivers/md/dm-raid.c-3868- mddev_suspend(&rs->md, false);
--
drivers/md/md.c=638=static void __mddev_put(struct mddev *mddev)
--
drivers/md/md.c-645- * If array is freed by stopping array, MD_DELETED is set by
drivers/md/md.c:646: * do_md_stop(), MD_DELETED is still set here in case mddev is freed
drivers/md/md.c-647- * directly by closing a mddev that is created by create_on_open.
--
drivers/md/md.c=915=void mddev_unlock(struct mddev *mddev)
--
drivers/md/md.c-977- * And MD_DELETED is only used for md raid which is set in
drivers/md/md.c:978: * do_md_stop. dm raid only uses md_stop to stop. So dm raid
drivers/md/md.c-979- * doesn't need to check MD_DELETED when getting reconfig lock
--
drivers/md/md.c=4613=array_state_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4650-
drivers/md/md.c:4651:static int do_md_stop(struct mddev *mddev, int ro);
drivers/md/md.c-4652-static int md_set_readonly(struct mddev *mddev);
--
drivers/md/md.c=4656=array_state_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4712- if (mddev->pers)
drivers/md/md.c:4713: err = do_md_stop(mddev, 2);
drivers/md/md.c-4714- break;
drivers/md/md.c-4715- case clear:
drivers/md/md.c:4716: err = do_md_stop(mddev, 0);
drivers/md/md.c-4717- break;
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7031-
drivers/md/md.c:7032:static void __md_stop_writes(struct mddev *mddev)
drivers/md/md.c-7033-{
--
drivers/md/md.c-7058-
drivers/md/md.c:7059:void md_stop_writes(struct mddev *mddev)
drivers/md/md.c-7060-{
--
drivers/md/md.c-7063- stop_sync_thread(mddev, true);
drivers/md/md.c:7064: __md_stop_writes(mddev);
drivers/md/md.c-7065- mddev_unlock(mddev);
drivers/md/md.c-7066-}
drivers/md/md.c:7067:EXPORT_SYMBOL_GPL(md_stop_writes);
drivers/md/md.c-7068-
drivers/md/md.c=7069=static void mddev_detach(struct mddev *mddev)
--
drivers/md/md.c-7083-
drivers/md/md.c:7084:static void __md_stop(struct mddev *mddev)
drivers/md/md.c-7085-{
--
drivers/md/md.c-7099-
drivers/md/md.c:7100:void md_stop(struct mddev *mddev)
drivers/md/md.c-7101-{
--
drivers/md/md.c-7106- */
drivers/md/md.c:7107: __md_stop_writes(mddev);
drivers/md/md.c:7108: __md_stop(mddev);
drivers/md/md.c-7109-}
drivers/md/md.c-7110-
drivers/md/md.c:7111:EXPORT_SYMBOL_GPL(md_stop);
drivers/md/md.c-7112-
--
drivers/md/md.c=7114=static int md_set_readonly(struct mddev *mddev)
--
drivers/md/md.c-7137-
drivers/md/md.c:7138: __md_stop_writes(mddev);
drivers/md/md.c-7139-
--
drivers/md/md.c-7161- */
drivers/md/md.c:7162:static int do_md_stop(struct mddev *mddev, int mode)
drivers/md/md.c-7163-{
--
drivers/md/md.c-7191-
drivers/md/md.c:7192: __md_stop_writes(mddev);
drivers/md/md.c:7193: __md_stop(mddev);
drivers/md/md.c-7194-
--
drivers/md/md.c=7234=static void autorun_array(struct mddev *mddev)
--
drivers/md/md.c-7251- pr_warn("md: do_md_run() returned %d\n", err);
drivers/md/md.c:7252: do_md_stop(mddev, 0);
drivers/md/md.c-7253- }
--
drivers/md/md.c=8342=static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
--
drivers/md/md.c-8435- case STOP_ARRAY:
drivers/md/md.c:8436: err = do_md_stop(mddev, 0);
drivers/md/md.c-8437- goto unlock;
--
drivers/md/md.c=9727=void md_do_sync(struct md_thread *thread)
--
drivers/md/md.c-10019- /*
drivers/md/md.c:10020: * this also signals 'finished resyncing' to md_stop
drivers/md/md.c-10021- */
--
drivers/md/md.c=10714=static int md_notify_reboot(struct notifier_block *this,
--
drivers/md/md.c-10725- if (mddev->pers)
drivers/md/md.c:10726: __md_stop_writes(mddev);
drivers/md/md.c-10727- if (mddev->persistent)
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-514- int in_sync; /* know to not need resync */
drivers/md/md.h:515: /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
drivers/md/md.h-516- * that we are never stopping an array while it is open.
--
drivers/md/md.h=709=static inline int __must_check mddev_lock(struct mddev *mddev)
--
drivers/md/md.h-714-
drivers/md/md.h:715: /* MD_DELETED is set in do_md_stop with reconfig_mutex.
drivers/md/md.h-716- * So check it here.
--
drivers/md/md.h-729- * holds the lock here can't be stopped. And all paths can't
drivers/md/md.h:730: * call this function after do_md_stop.
drivers/md/md.h-731- */
--
drivers/md/md.h=958=extern int md_start(struct mddev *mddev);
drivers/md/md.h:959:extern void md_stop(struct mddev *mddev);
drivers/md/md.h:960:extern void md_stop_writes(struct mddev *mddev);
drivers/md/md.h-961-extern int md_rdev_init(struct md_rdev *rdev);
]
|
| 188/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 68249
output: 34
thoughts: 36
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Diving into the MD Array Startup**
Alright, time to get my hands dirty with `md_run()` within the `drivers/md/md.c` code. My immediate focus is on how this function handles the initialization of an MD array. I need to refresh my understanding of the startup sequence. I'll need to drill down and see how `md_run()` orchestrates the initial steps for bringing an array online, particularly any potential race conditions or resource contention. I'll be looking for synchronization primitives, device access patterns, and anything that might give insight into performance bottlenecks or potential failure points during the array's bring-up. It's time to trace the function and see what's what.
|
| 189/4 |
2026/09/09 20:40 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_run]
Results: map[SourceCode:6650: int md_run(struct mddev *mddev)
6651: {
6652: int err;
6653: struct md_rdev *rdev;
6654: struct md_personality *pers;
6655:
6656: if (list_empty(&mddev->disks))
6657: /* cannot run an array with no devices.. */
6658: return -EINVAL;
6659:
6660: if (mddev->pers)
6661: return -EBUSY;
6662: /* Cannot run until previous stop completes properly */
6663: if (mddev->sysfs_active)
6664: return -EBUSY;
6665:
6666: /*
6667: * Analyze all RAID superblock(s)
6668: */
6669: if (!mddev->raid_disks) {
6670: if (!mddev->persistent)
6671: return -EINVAL;
6672: err = analyze_sbs(mddev);
6673: if (err)
6674: return -EINVAL;
6675: }
6676:
6677: if (mddev->level != LEVEL_NONE)
6678: request_module("md-level-%d", mddev->level);
6679: else if (mddev->clevel[0])
6680: request_module("md-%s", mddev->clevel);
6681:
6682: /*
6683: * Drop all container device buffers, from now on
6684: * the only valid external interface is through the md
6685: * device.
6686: */
6687: clear_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6688: rdev_for_each(rdev, mddev) {
6689: if (test_bit(Faulty, &rdev->flags))
6690: continue;
6691: sync_blockdev(rdev->bdev);
6692: invalidate_bdev(rdev->bdev);
6693: if (mddev->ro != MD_RDONLY && rdev_read_only(rdev)) {
6694: mddev->ro = MD_RDONLY;
6695: if (!mddev_is_dm(mddev))
6696: set_disk_ro(mddev->gendisk, 1);
6697: }
6698:
6699: if (rdev->sb_page)
6700: set_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6701:
6702: /* perform some consistency tests on the device.
6703: * We don't want the data to overlap the metadata,
6704: * Internal Bitmap issues have been handled elsewhere.
6705: */
6706: if (rdev->meta_bdev) {
6707: /* Nothing to check */;
6708: } else if (rdev->data_offset < rdev->sb_start) {
6709: if (mddev->dev_sectors &&
6710: rdev->data_offset + mddev->dev_sectors
6711: > rdev->sb_start) {
6712: pr_warn("md: %s: data overlaps metadata\n",
6713: mdname(mddev));
6714: return -EINVAL;
6715: }
6716: } else {
6717: if (rdev->sb_start + rdev->sb_size/512
6718: > rdev->data_offset) {
6719: pr_warn("md: %s: metadata overlaps data\n",
6720: mdname(mddev));
6721: return -EINVAL;
6722: }
6723: }
6724: sysfs_notify_dirent_safe(rdev->sysfs_state);
6725: }
6726:
6727: pers = get_pers(mddev->level, mddev->clevel);
6728: if (!pers)
6729: return -EINVAL;
6730: if (mddev->level != pers->head.id) {
6731: mddev->level = pers->head.id;
6732: mddev->new_level = pers->head.id;
6733: }
6734: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
6735:
6736: if (mddev->reshape_position != MaxSector &&
6737: pers->start_reshape == NULL) {
6738: /* This personality cannot handle reshaping... */
6739: put_pers(pers);
6740: return -EINVAL;
6741: }
6742:
6743: if (pers->sync_request) {
6744: /* Warn if this is a potentially silly
6745: * configuration.
6746: */
6747: struct md_rdev *rdev2;
6748: int warned = 0;
6749:
6750: rdev_for_each(rdev, mddev)
6751: rdev_for_each(rdev2, mddev) {
6752: if (rdev < rdev2 &&
6753: rdev->bdev->bd_disk ==
6754: rdev2->bdev->bd_disk) {
6755: pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",
6756: mdname(mddev),
6757: rdev->bdev,
6758: rdev2->bdev);
6759: warned = 1;
6760: }
6761: }
6762:
6763: if (warned)
6764: pr_warn("True protection against single-disk failure might be compromised.\n");
6765: }
6766:
6767: /* dm-raid expect sync_thread to be frozen until resume */
6768: if (!mddev_is_dm(mddev))
6769: mddev->recovery = 0;
6770:
6771: /* may be over-ridden by personality */
6772: mddev->resync_max_sectors = mddev->dev_sectors;
6773:
6774: mddev->ok_start_degraded = start_dirty_degraded;
6775:
6776: if (start_readonly && md_is_rdwr(mddev))
6777: mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
6778:
6779: err = pers->run(mddev);
6780: if (err)
6781: pr_warn("md: pers->run() failed ...\n");
6782: else if (pers->size(mddev, 0, 0) < mddev->array_sectors) {
6783: WARN_ONCE(!mddev->external_size,
6784: "%s: default size too small, but 'external_size' not in effect?\n",
6785: __func__);
6786: pr_warn("md: invalid array_size %llu > default size %llu\n",
6787: (unsigned long long)mddev->array_sectors / 2,
6788: (unsigned long long)pers->size(mddev, 0, 0) / 2);
6789: err = -EINVAL;
6790: }
6791: if (err == 0 && pers->sync_request &&
6792: (mddev->bitmap_info.file || mddev->bitmap_info.offset)) {
6793: err = md_bitmap_create(mddev);
6794: if (err)
6795: pr_warn("%s: failed to create bitmap (%d)\n",
6796: mdname(mddev), err);
6797: }
6798: if (err)
6799: goto bitmap_abort;
6800:
6801: if (mddev->bitmap_info.max_write_behind > 0) {
6802: bool create_pool = false;
6803:
6804: rdev_for_each(rdev, mddev) {
6805: if (test_bit(WriteMostly, &rdev->flags) &&
6806: rdev_init_serial(rdev))
6807: create_pool = true;
6808: }
6809: if (create_pool && mddev->serial_info_pool == NULL) {
6810: mddev->serial_info_pool =
6811: mempool_create_kmalloc_pool(NR_SERIAL_INFOS,
6812: sizeof(struct serial_info));
6813: if (!mddev->serial_info_pool) {
6814: err = -ENOMEM;
6815: goto bitmap_abort;
6816: }
6817: }
6818: }
6819:
6820: if (pers->sync_request) {
6821: if (mddev->kobj.sd &&
6822: sysfs_create_group(&mddev->kobj, &md_redundancy_group))
6823: pr_warn("md: cannot register extra attributes for %s\n",
6824: mdname(mddev));
6825: mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
6826: mddev->sysfs_completed = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_completed");
6827: mddev->sysfs_degraded = sysfs_get_dirent_safe(mddev->kobj.sd, "degraded");
6828: } else if (mddev->ro == MD_AUTO_READ)
6829: mddev->ro = MD_RDWR;
6830:
6831: atomic_set(&mddev->max_corr_read_errors,
6832: MD_DEFAULT_MAX_CORRECTED_READ_ERRORS);
6833: mddev->safemode = 0;
6834: if (mddev_is_clustered(mddev))
6835: mddev->safemode_delay = 0;
6836: else
6837: mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
6838: mddev->in_sync = 1;
6839: smp_wmb();
6840: spin_lock(&mddev->lock);
6841: mddev->pers = pers;
6842: spin_unlock(&mddev->lock);
6843: rdev_for_each(rdev, mddev)
6844: if (rdev->raid_disk >= 0)
6845: sysfs_link_rdev(mddev, rdev); /* failure here is OK */
6846:
6847: if (mddev->degraded && md_is_rdwr(mddev))
6848: /* This ensures that recovering status is reported immediately
6849: * via sysfs - until a lack of spares is confirmed.
6850: */
6851: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
6852: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
6853:
6854: if (mddev->sb_flags)
6855: md_update_sb(mddev, 0);
6856:
6857: if (IS_ENABLED(CONFIG_MD_BITMAP) && !mddev->bitmap_info.file &&
6858: !mddev->bitmap_info.offset)
6859: md_bitmap_set_none(mddev);
6860:
6861: md_new_event();
6862: return 0;
6863:
6864: bitmap_abort:
6865: mddev_detach(mddev);
6866: if (mddev->private)
6867: pers->free(mddev, mddev->private);
6868: mddev->private = NULL;
6869: put_pers(pers);
6870: md_bitmap_destroy(mddev);
6871: return err;
6872: }
SourceFile:drivers/md/md.c]
|
| 190/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 72040
output: 35
thoughts: 399
Thoughts: **Analyzing the MD Driver's Shutdown and Abort Paths**
Okay, let's break this down. I'm focusing on the interaction between the `md_run`, `bitmap_abort`, and `__md_stop` functions within the MD driver. It seems like I'm looking for potential race conditions or inconsistencies in how the MD device is stopped or how bitmaps are handled.
First, I examined lines 6730-6733 within `md_run`. The code updates `mddev->level` and `mddev->new_level` with `pers->head.id`, likely representing the current or intended RAID level. The important part is how `bitmap_abort` is called in relation to this update.
Then, I jumped to `bitmap_abort` within `md_run`. What's catching my eye is that `pers->run` has already executed by the point `bitmap_abort` is called. So, the personality has been started, but if the bitmap fails, it triggers an abort. It performs device detachment, frees resources, and destroys the bitmap. This triggers a question in my mind about the potential for inconsistent state if the bitmap fails after the personality has started.
Finally, I checked out `__md_stop()`, the core function for stopping an MD device. I see that it also performs detachment, bitmap destruction, resource freeing, and personality release, in addition to resetting the recovery flags. The key observation is the apparent similarity to `bitmap_abort`, but this is a graceful shutdown path. I'll need to confirm that `mddev_detach` handles all the necessary cleanup steps.
I'm now going to dig into `mddev_detach` to understand its role in this process and ensure it synchronizes access to shared resources correctly. I'll have to consider how the different paths (normal shutdown vs. bitmap failure) might interact and look for potential double frees or use-after-free conditions. I'm essentially tracing the cleanup flow in both scenarios.
|
| 191/4 |
2026/09/09 20:40 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:mddev_detach]
Results: map[SourceCode:7069: static void mddev_detach(struct mddev *mddev)
7070: {
7071: if (md_bitmap_enabled(mddev, false))
7072: mddev->bitmap_ops->wait_behind_writes(mddev);
7073: if (mddev->pers && mddev->pers->quiesce && !is_md_suspended(mddev)) {
7074: mddev->pers->quiesce(mddev, 1);
7075: mddev->pers->quiesce(mddev, 0);
7076: }
7077: md_unregister_thread(mddev, &mddev->thread);
7078:
7079: /* the unplug fn references 'conf' */
7080: if (!mddev_is_dm(mddev))
7081: blk_sync_queue(mddev->gendisk->queue);
7082: }
SourceFile:drivers/md/md.c]
|
| 192/4 |
2026/09/09 20:40 |
llm |
patch-generator-compressor |
0m
Model:
Reply: ### Summary of Investigation and Workspace State
#### 1. Background and Approaches Explored
* **Crash Context**: Syzkaller triggered `kernel BUG at drivers/md/raid5.c:8117!` inside `raid5_run()` during array startup (`array_state_store` -> `do_md_run` -> `md_run` -> `pers->run` / `raid5_run`).
* **Trigger sequence**:
1. RAID5 array active (`pers` attached).
2. Reshape requested without starting it: e.g. writing `raid_disks` attribute calls `update_raid_disks()`, which sets `mddev->delta_disks = raid_disks - mddev->raid_disks` and invokes `check_reshape(mddev)`. Similarly, writing `layout` or `chunk_size` sysfs attributes modifies `new_layout` / `new_chunk_sectors`.
3. Reshape never actually started (`mddev->reshape_position` remains `MaxSector`).
4. Array stopped/deactivated to inactive state: `array_state` set to `"inactive"`, calling `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`.
5. `__md_stop(mddev)` detaches the personality (`mddev->pers = NULL`), frees `mddev->private`, clears `MD_RECOVERY_FROZEN`, but preserves all stale reshape fields on `mddev`. (Unlike `do_md_stop(mddev, 0)` which calls `md_clean(mddev)`).
6. Array restarted: `md_run()` invokes `raid5_run()`. Because `mddev->reshape_position == MaxSector`, `raid5_run()` hits the `else` branch (drivers/md/raid5.c:8114-8118) which asserts:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
7. Crash triggered on `BUG_ON(mddev->delta_disks != 0);` (and potentially on the other three `BUG_ON`s if layout/chunk_size/level were modified).
* **Approaches / Checks Done**:
- Examined `__md_stop()` at `drivers/md/md.c:7084`: Verified it only cleans personality, bitmap, and recovery flag, completely ignoring in-memory reshape parameters.
- Examined `md_clean()` at `drivers/md/md.c:6967`: Called on full disassembly (`mode == 0`), which zeroes `delta_disks`, `reshape_backwards`, resets `new_level = LEVEL_NONE`, `new_layout = 0`, `new_chunk_sectors = 0`, `reshape_position = MaxSector`.
- Examined `do_md_stop()` at `drivers/md/md.c:7162` and `md_stop()` at `drivers/md/md.c:7100`: Confirmed both call `__md_stop(mddev)`. Both callers hold `reconfig_mutex`.
- Examined `super_1_validate()` (lines 2054-2071) and `super_90_validate()` (lines 1511-1525): Both adhere to the exact paradigm:
```c
if (reshape_is_not_active) {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
- Examined `update_raid_disks()`, `layout_store()`, `chunk_size_store()`, `level_store()`:
When the array is active, these set `delta_disks`, `new_layout`, `new_chunk_sectors`, and/or `new_level` pending reshape start.
If `start_reshape()` has not run, `mddev->reshape_position` stays `MaxSector`.
If the array is stopped with `mode == 2`, these changes are orphaned and stale.
- Examined `raid5_start_reshape()` at `drivers/md/raid5.c:8635`: Confirmed that `mddev->reshape_position` is only transitioned away from `MaxSector` once reshape actually begins (line 8756: `mddev->reshape_position = conf->reshape_progress`).
#### 2. Current Theories & Active Solution
* The proposed fix in `__md_stop()`:
When `__md_stop(mddev)` is called (during `do_md_stop(mddev, 2)` or `md_stop(mddev)`), if no reshape is currently active on disk/in progress (`mddev->reshape_position == MaxSector`), the pending/uncommitted reshape parameters must be cleared and reset to array defaults:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
* If `mddev->reshape_position != MaxSector`, a reshape was actively in-progress when stopped. In that case, parameters are preserved so the array can resume reshaping on restart.
* Locking: `mddev->reconfig_mutex` is guaranteed held by all callers of `__md_stop()` (`do_md_stop` and `md_stop`), so updating these fields inside `__md_stop()` is strictly race-free.
#### 3. Key Files, Code Snippets, and References
* **File**: `drivers/md/md.c`
Function: `__md_stop(struct mddev *mddev)`
Lines 7084-7098:
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
```
Target patch location is at the end of `__md_stop()`:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
* **File**: `drivers/md/raid5.c`
Function: `raid5_run(struct mddev *mddev)`
Lines 8113-8118:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
#### 4. Watchouts & Loop Prevention
* No repetitive tool calls: The inspection of MD core logic, superblocks, and personality handlers is complete.
* Ensure not to clear reshape parameters when `reshape_position != MaxSector`, as that would break resumption of active reshapes.
* Next immediate step is to edit `drivers/md/md.c` with `codeeditor`, verify with `patch-diff`, and compile/validate.
Tokens:
input: 58303
output: 1973
thoughts: 0
|
| 193/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 28532
output: 37
thoughts: 27
Thoughts: Here's my summary, as though I'm thinking through this myself:
**Debugging that `BUG_ON` in `raid5_run`**
Okay, so we've got a `BUG_ON` in `raid5_run`, and I need to figure out why. The first thing I'm going to do is zero in on the immediate context of that error. Let's start with line 8117 - that's where the problem is manifesting. I'll jump right into the code around there and see what's going on. I need to understand what conditions are being checked and, more importantly, *why* those checks are in place. Is there a potential race condition? Is it related to some corner case in the parity calculations? Does this point to a potential data corruption problem earlier in the execution path? The goal is to piece together the state of the system that leads up to this assertion. It's time to dig in and unravel this puzzle.
|
| 194/4 |
2026/09/09 20:40 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8080 LineCount:50]
Results: map[Contents:8080: /* here_new is the stripe we will write to */
8081: here_old = mddev->reshape_position;
8082: sector_div(here_old, chunk_sectors * (old_disks-max_degraded));
8083: /* here_old is the first stripe that we might need to read
8084: * from */
8085: if (mddev->delta_disks == 0) {
8086: /* We cannot be sure it is safe to start an in-place
8087: * reshape. It is only safe if user-space is monitoring
8088: * and taking constant backups.
8089: * mdadm always starts a situation like this in
8090: * readonly mode so it can take control before
8091: * allowing any writes. So just check for that.
8092: */
8093: if (abs(min_offset_diff) >= mddev->chunk_sectors &&
8094: abs(min_offset_diff) >= mddev->new_chunk_sectors)
8095: /* not really in-place - so OK */;
8096: else if (mddev->ro == 0) {
8097: pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n",
8098: mdname(mddev));
8099: return -EINVAL;
8100: }
8101: } else if (mddev->reshape_backwards
8102: ? (here_new * chunk_sectors + min_offset_diff <=
8103: here_old * chunk_sectors)
8104: : (here_new * chunk_sectors >=
8105: here_old * chunk_sectors + (-min_offset_diff))) {
8106: /* Reading from the same stripe as writing to - bad */
8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
8108: mdname(mddev));
8109: return -EINVAL;
8110: }
8111: pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
8112: /* OK, we should be able to continue; */
8113: } else {
8114: BUG_ON(mddev->level != mddev->new_level);
8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
8120: if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
8121: test_bit(MD_HAS_PPL, &mddev->flags)) {
8122: pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
8123: mdname(mddev));
8124: clear_bit(MD_HAS_PPL, &mddev->flags);
8125: clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
8126: }
8127:
8128: if (mddev->private == NULL)
8129: conf = setup_conf(mddev);
]
|
| 195/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 29754
output: 27
thoughts: 187
Thoughts: **Analyzing the RAID5 Reshape Logic**
Okay, so I'm digging into this `raid5_run()` function, specifically lines 8113-8118. It seems to be checking some invariants related to a reshape operation. The code's using `BUG_ON` which immediately flags errors, so these conditions are *critical*. It's checking if the current RAID level, layout, chunk size, and delta disk count are consistent with the "new" configuration. Makes sense β if these parameters have changed during a reshape, it's a bug. But the check only applies when `mddev->reshape_position` isn't equal to `MaxSector`. So this block appears to be skipped when resuming from a reshape.
Now, I'm getting a little curious about how other RAID personalities handle this. Are they all so strict about these checks? I need to see if this pattern is common or specific to RAID5. I'll open up `raid10.c`, `raid1.c`, and `raid0.c` to see how those implementations handle this kind of thing. And just to be thorough, I should search the entire `drivers/md/` directory for any occurrences of `delta_disks`. That should give me a better overview of how this concept is utilized (or not) across different RAID implementations. I need a clear picture before I can draw any real conclusions.
|
| 196/4 |
2026/09/09 20:40 |
tool |
grepper |
0m
Args: map[Expression:delta_disks PathPrefix:drivers/md]
Results: map[Output:
Full output is too long, showing 500 out of 572 lines.
Use more precise expression if possible.
drivers/md/dm-raid.c=41=struct raid_dev {
--
drivers/md/dm-raid.c-120-
drivers/md/dm-raid.c:121:/* Define flags for options with one argument (e.g. 'delta_disks +2') */
drivers/md/dm-raid.c-122-#define CTR_FLAG_OPTIONS_ONE_ARG (CTR_FLAG_REBUILD | \
--
drivers/md/dm-raid.c-141-
drivers/md/dm-raid.c:142:/* "raid1" does not accept stripe cache, data offset, delta_disks or any raid10 options */
drivers/md/dm-raid.c-143-#define RAID1_VALID_FLAGS (CTR_FLAGS_ANY_SYNC | \
--
drivers/md/dm-raid.c=230=struct raid_set {
--
drivers/md/dm-raid.c-239- int raid_disks;
drivers/md/dm-raid.c:240: int delta_disks;
drivers/md/dm-raid.c-241- int data_offset;
--
drivers/md/dm-raid.c=323=static struct arg_name_flag {
--
drivers/md/dm-raid.c-339- { CTR_FLAG_DATA_OFFSET, "data_offset"},
drivers/md/dm-raid.c:340: { CTR_FLAG_DELTA_DISKS, "delta_disks"},
drivers/md/dm-raid.c-341- { CTR_FLAG_RAID10_USE_NEAR_SETS, "raid10_use_near_sets"},
--
drivers/md/dm-raid.c=725=static void rs_set_new(struct raid_set *rs)
--
drivers/md/dm-raid.c-732- mddev->raid_disks = rs->raid_disks;
drivers/md/dm-raid.c:733: mddev->delta_disks = 0;
drivers/md/dm-raid.c-734-}
--
drivers/md/dm-raid.c=736=static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type,
--
drivers/md/dm-raid.c-759- rs->raid_disks = raid_devs;
drivers/md/dm-raid.c:760: rs->delta_disks = 0;
drivers/md/dm-raid.c-761-
--
drivers/md/dm-raid.c-769- rs->md.new_layout = rs->md.layout;
drivers/md/dm-raid.c:770: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-771- rs->md.resync_offset = MaxSector;
--
drivers/md/dm-raid.c=1130=static int parse_raid_params(struct raid_set *rs, struct dm_arg_set *as,
--
drivers/md/dm-raid.c-1389- if (test_and_set_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags)) {
drivers/md/dm-raid.c:1390: rs->ti->error = "Only one delta_disks argument pair allowed";
drivers/md/dm-raid.c-1391- return -EINVAL;
--
drivers/md/dm-raid.c-1398-
drivers/md/dm-raid.c:1399: rs->delta_disks = value;
drivers/md/dm-raid.c-1400- } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_STRIPE_CACHE))) {
--
drivers/md/dm-raid.c=1643=static int rs_set_dev_and_array_sectors(struct raid_set *rs, sector_t sectors, bool use_mddev)
drivers/md/dm-raid.c-1644-{
drivers/md/dm-raid.c:1645: int delta_disks;
drivers/md/dm-raid.c-1646- unsigned int data_stripes;
--
drivers/md/dm-raid.c-1650- if (use_mddev) {
drivers/md/dm-raid.c:1651: delta_disks = mddev->delta_disks;
drivers/md/dm-raid.c-1652- data_stripes = mddev_data_stripes(rs);
drivers/md/dm-raid.c-1653- } else {
drivers/md/dm-raid.c:1654: delta_disks = rs->delta_disks;
drivers/md/dm-raid.c-1655- data_stripes = rs_data_stripes(rs);
--
drivers/md/dm-raid.c-1657-
drivers/md/dm-raid.c:1658: /* Special raid1 case w/o delta_disks support (yet) */
drivers/md/dm-raid.c-1659- if (rt_is_raid1(rs->raid_type))
--
drivers/md/dm-raid.c-1662- if (rs->raid10_copies < 2 ||
drivers/md/dm-raid.c:1663: delta_disks < 0) {
drivers/md/dm-raid.c-1664- rs->ti->error = "Bogus raid10 data copies or delta disks";
--
drivers/md/dm-raid.c-1671-
drivers/md/dm-raid.c:1672: array_sectors = (data_stripes + delta_disks) * (dev_sectors - _get_reshape_sectors(rs));
drivers/md/dm-raid.c-1673- if (sector_div(array_sectors, rs->raid10_copies))
--
drivers/md/dm-raid.c-1680- /* Striped layouts */
drivers/md/dm-raid.c:1681: array_sectors = (data_stripes + delta_disks) * (dev_sectors - _get_reshape_sectors(rs));
drivers/md/dm-raid.c-1682-
--
drivers/md/dm-raid.c=1715=static void do_table_event(struct work_struct *ws)
--
drivers/md/dm-raid.c-1723- rs->array_sectors > rs->md.array_sectors &&
drivers/md/dm-raid.c:1724: !rs->md.delta_disks &&
drivers/md/dm-raid.c-1725- rs->md.raid_disks == rs->raid_disks) {
--
drivers/md/dm-raid.c=1743=static int rs_check_takeover(struct raid_set *rs)
--
drivers/md/dm-raid.c-1790- mddev->raid_disks /= near_copies;
drivers/md/dm-raid.c:1791: mddev->delta_disks = mddev->raid_disks;
drivers/md/dm-raid.c-1792- return 0;
--
drivers/md/dm-raid.c=1904=static bool rs_is_layout_change(struct raid_set *rs, bool use_mddev)
drivers/md/dm-raid.c-1905-{
drivers/md/dm-raid.c:1906: return (use_mddev ? rs->md.delta_disks : rs->delta_disks) ||
drivers/md/dm-raid.c-1907- rs->md.new_layout != rs->md.layout ||
--
drivers/md/dm-raid.c=1912=static bool rs_reshape_requested(struct raid_set *rs)
--
drivers/md/dm-raid.c-1926- if (rs_is_raid1(rs)) {
drivers/md/dm-raid.c:1927: if (rs->delta_disks)
drivers/md/dm-raid.c:1928: return !!rs->delta_disks;
drivers/md/dm-raid.c-1929-
--
drivers/md/dm-raid.c-1936- !__is_raid10_far(mddev->new_layout) &&
drivers/md/dm-raid.c:1937: rs->delta_disks >= 0;
drivers/md/dm-raid.c-1938-
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2003- __le32 new_stripe_sectors;
drivers/md/dm-raid.c:2004: __le32 delta_disks;
drivers/md/dm-raid.c-2005-
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2160-
drivers/md/dm-raid.c:2161: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/dm-raid.c-2162-
--
drivers/md/dm-raid.c-2168-
drivers/md/dm-raid.c:2169: if (mddev->delta_disks < 0 || mddev->reshape_backwards)
drivers/md/dm-raid.c-2170- sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_BACKWARDS);
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2271- mddev->new_chunk_sectors = le32_to_cpu(sb->new_stripe_sectors);
drivers/md/dm-raid.c:2272: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/dm-raid.c-2273- mddev->array_sectors = le64_to_cpu(sb->array_sectors);
--
drivers/md/dm-raid.c-2281-
drivers/md/dm-raid.c:2282: if (mddev->delta_disks < 0 ||
drivers/md/dm-raid.c:2283: (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS)))
drivers/md/dm-raid.c-2284- mddev->reshape_backwards = 1;
--
drivers/md/dm-raid.c-2320- mddev->chunk_sectors, mddev->new_chunk_sectors);
drivers/md/dm-raid.c:2321: if (rs->delta_disks)
drivers/md/dm-raid.c-2322- DMERR(" current %u disks vs new %u disks",
drivers/md/dm-raid.c:2323: mddev->raid_disks, mddev->raid_disks + rs->delta_disks);
drivers/md/dm-raid.c-2324- if (rs_is_raid10(rs)) {
--
drivers/md/dm-raid.c-2378- } else if (new_devs != rebuilds &&
drivers/md/dm-raid.c:2379: new_devs != rs->delta_disks) {
drivers/md/dm-raid.c-2380- DMERR("New device injected into existing raid set without "
drivers/md/dm-raid.c:2381: "'delta_disks' or 'rebuild' parameter specified");
drivers/md/dm-raid.c-2382- return -EINVAL;
--
drivers/md/dm-raid.c=2630=static int rs_adjust_data_offsets(struct raid_set *rs)
--
drivers/md/dm-raid.c-2645-
drivers/md/dm-raid.c:2646: if (rs->delta_disks < 0) {
drivers/md/dm-raid.c-2647- /*
--
drivers/md/dm-raid.c-2657-
drivers/md/dm-raid.c:2658: } else if (rs->delta_disks > 0) {
drivers/md/dm-raid.c-2659- /*
--
drivers/md/dm-raid.c=2784=static int rs_prepare_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2817- else if (rs_is_raid1(rs)) {
drivers/md/dm-raid.c:2818: if (rs->delta_disks) {
drivers/md/dm-raid.c:2819: /* Process raid1 via delta_disks */
drivers/md/dm-raid.c:2820: mddev->degraded = rs->delta_disks < 0 ? -rs->delta_disks : rs->delta_disks;
drivers/md/dm-raid.c-2821- reshape = true;
drivers/md/dm-raid.c-2822- } else {
drivers/md/dm-raid.c:2823: /* Process raid1 without delta_disks */
drivers/md/dm-raid.c-2824- mddev->raid_disks = rs->raid_disks;
--
drivers/md/dm-raid.c=2849=static int rs_setup_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2856-
drivers/md/dm-raid.c:2857: mddev->delta_disks = rs->delta_disks;
drivers/md/dm-raid.c-2858- cur_raid_devs = mddev->raid_disks;
--
drivers/md/dm-raid.c-2860- /* Ignore impossible layout change whilst adding/removing disks */
drivers/md/dm-raid.c:2861: if (mddev->delta_disks &&
drivers/md/dm-raid.c-2862- mddev->layout != mddev->new_layout) {
drivers/md/dm-raid.c:2863: DMINFO("Ignoring invalid layout change with delta_disks=%d", rs->delta_disks);
drivers/md/dm-raid.c-2864- mddev->new_layout = mddev->layout;
--
drivers/md/dm-raid.c-2889- /* Add disk(s) */
drivers/md/dm-raid.c:2890: if (rs->delta_disks > 0) {
drivers/md/dm-raid.c-2891- /* Prepare disks for check in raid4/5/6/10 {check|start}_reshape */
--
drivers/md/dm-raid.c-2909- /* Remove disk(s) */
drivers/md/dm-raid.c:2910: } else if (rs->delta_disks < 0) {
drivers/md/dm-raid.c-2911- r = rs_set_dev_and_array_sectors(rs, rs->ti->len, true);
--
drivers/md/dm-raid.c-2931- * adding/removing reshape space has to be at
drivers/md/dm-raid.c:2932: * the proper address (see above with delta_disks):
drivers/md/dm-raid.c-2933- *
--
drivers/md/dm-raid.c=2957=static void rs_reset_inconclusive_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2960- rs_set_cur(rs);
drivers/md/dm-raid.c:2961: rs->md.delta_disks = 0;
drivers/md/dm-raid.c-2962- rs->md.reshape_backwards = 0;
--
drivers/md/dm-raid.c=3526=static void raid_status(struct dm_target *ti, status_type_t type,
--
drivers/md/dm-raid.c-3675- DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_DELTA_DISKS),
drivers/md/dm-raid.c:3676: max(rs->delta_disks, mddev->delta_disks));
drivers/md/dm-raid.c-3677- if (test_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags))
--
drivers/md/dm-raid.c=4117=static void raid_resume(struct dm_target *ti)
--
drivers/md/dm-raid.c-4134- /* Only reduce raid set size before running a disk removing reshape. */
drivers/md/dm-raid.c:4135: if (mddev->delta_disks < 0)
drivers/md/dm-raid.c-4136- rs_set_capacity(rs);
--
drivers/md/md-llbitmap.c=1431=static int llbitmap_resize(struct mddev *mddev, sector_t blocks, int chunksize)
--
drivers/md/md-llbitmap.c-1448-
drivers/md/md-llbitmap.c:1449: reshape = mddev->delta_disks || mddev->new_level != mddev->level ||
drivers/md/md-llbitmap.c-1450- mddev->new_layout != mddev->layout ||
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1512- mddev->reshape_position = sb->reshape_position;
drivers/md/md.c:1513: mddev->delta_disks = sb->delta_disks;
drivers/md/md.c-1514- mddev->new_level = sb->new_level;
--
drivers/md/md.c-1516- mddev->new_chunk_sectors = sb->new_chunk >> 9;
drivers/md/md.c:1517: if (mddev->delta_disks < 0)
drivers/md/md.c-1518- mddev->reshape_backwards = 1;
--
drivers/md/md.c-1520- mddev->reshape_position = MaxSector;
drivers/md/md.c:1521: mddev->delta_disks = 0;
drivers/md/md.c-1522- mddev->new_level = mddev->level;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
drivers/md/md.c:1655: sb->delta_disks = mddev->delta_disks;
drivers/md/md.c-1656- sb->new_layout = mddev->new_layout;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2055- mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c:2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/md.c-2057- mddev->new_level = le32_to_cpu(sb->new_level);
--
drivers/md/md.c-2059- mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
drivers/md/md.c:2060: if (mddev->delta_disks < 0 ||
drivers/md/md.c:2061: (mddev->delta_disks == 0 &&
drivers/md/md.c-2062- (le32_to_cpu(sb->feature_map)
--
drivers/md/md.c-2066- mddev->reshape_position = MaxSector;
drivers/md/md.c:2067: mddev->delta_disks = 0;
drivers/md/md.c-2068- mddev->new_level = mddev->level;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
drivers/md/md.c:2268: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/md.c-2269- sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/md.c-2270- sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
drivers/md/md.c:2271: if (mddev->delta_disks == 0 &&
drivers/md/md.c-2272- mddev->reshape_backwards)
--
drivers/md/md.c=2794=void md_update_sb(struct mddev *mddev, int force_change)
--
drivers/md/md.c-2836- if (rdev->raid_disk >= 0 &&
drivers/md/md.c:2837: mddev->delta_disks >= 0 &&
drivers/md/md.c-2838- test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
--
drivers/md/md.c=3286=slot_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3336- if (slot >= rdev->mddev->raid_disks &&
drivers/md/md.c:3337: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
drivers/md/md.c-3338- return -ENOSPC;
--
drivers/md/md.c-3357- if (slot >= rdev->mddev->raid_disks &&
drivers/md/md.c:3358: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
drivers/md/md.c-3359- return -ENOSPC;
--
drivers/md/md.c=3899=static int analyze_sbs(struct mddev *mddev)
--
drivers/md/md.c-3944- }
drivers/md/md.c:3945: if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks)) &&
drivers/md/md.c-3946- !test_bit(Journal, &rdev->flags)) {
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4130-
drivers/md/md.c:4131: /* ->takeover must set new_* and/or delta_disks
drivers/md/md.c-4132- * if it succeeds, and may set them when it fails.
--
drivers/md/md.c-4138- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/md.c:4139: mddev->raid_disks -= mddev->delta_disks;
drivers/md/md.c:4140: mddev->delta_disks = 0;
drivers/md/md.c-4141- mddev->reshape_backwards = 0;
--
drivers/md/md.c-4160- mddev->chunk_sectors = mddev->new_chunk_sectors;
drivers/md/md.c:4161: mddev->delta_disks = 0;
drivers/md/md.c-4162- mddev->reshape_backwards = 0;
--
drivers/md/md.c=4403=raid_disks_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4407- if (mddev->reshape_position != MaxSector &&
drivers/md/md.c:4408: mddev->delta_disks != 0)
drivers/md/md.c-4409- return sprintf(page, "%d (%d)\n", mddev->raid_disks,
drivers/md/md.c:4410: mddev->raid_disks - mddev->delta_disks);
drivers/md/md.c-4411- return sprintf(page, "%d\n", mddev->raid_disks);
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4435- struct md_rdev *rdev;
drivers/md/md.c:4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
drivers/md/md.c-4437-
--
drivers/md/md.c-4447- err = 0;
drivers/md/md.c:4448: mddev->delta_disks = n - olddisks;
drivers/md/md.c-4449- mddev->raid_disks = n;
drivers/md/md.c:4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
drivers/md/md.c-4451- } else
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5738- mddev->reshape_position = new;
drivers/md/md.c:5739: mddev->delta_disks = 0;
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
--
drivers/md/md.c=5764=reshape_direction_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5781- /* check if we are allowed to change */
drivers/md/md.c:5782: if (mddev->delta_disks)
drivers/md/md.c-5783- err = -EBUSY;
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7006- mddev->can_decrease_events = 0;
drivers/md/md.c:7007: mddev->delta_disks = 0;
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7974- mddev->new_layout = mddev->layout;
drivers/md/md.c:7975: mddev->delta_disks = 0;
drivers/md/md.c-7976- mddev->reshape_backwards = 0;
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8059-
drivers/md/md.c:8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
drivers/md/md.c:8061: if (mddev->delta_disks < 0)
drivers/md/md.c-8062- mddev->reshape_backwards = 1;
drivers/md/md.c:8063: else if (mddev->delta_disks > 0)
drivers/md/md.c-8064- mddev->reshape_backwards = 0;
--
drivers/md/md.c-8067- if (rv < 0) {
drivers/md/md.c:8068: mddev->delta_disks = 0;
drivers/md/md.c-8069- mddev->reshape_backwards = 0;
--
drivers/md/md.c=9680=static void md_finish_sync(struct mddev *mddev, enum sync_action action)
--
drivers/md/md.c-9695- rdev_for_each_rcu(rdev, mddev)
drivers/md/md.c:9696: if (mddev->delta_disks >= 0 &&
drivers/md/md.c-9697- rdev_needs_recovery(rdev, mddev->curr_resync))
--
drivers/md/md.c-9702- if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
drivers/md/md.c:9703: mddev->delta_disks > 0 &&
drivers/md/md.c-9704- mddev->pers->finish_reshape &&
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10879- /*
drivers/md/md.c:10880: * Since mddev->delta_disks has already updated in update_raid_disks,
drivers/md/md.c-10881- * so it is time to check reshape.
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-467- sector_t reshape_position;
drivers/md/md.h:468: int delta_disks, new_level, new_layout;
drivers/md/md.h-469- int new_chunk_sectors;
--
drivers/md/raid0.c=646=static void *raid0_takeover_raid45(struct mddev *mddev)
--
drivers/md/raid0.c-672- mddev->raid_disks--;
drivers/md/raid0.c:673: mddev->delta_disks = -1;
drivers/md/raid0.c-674- /* make sure it will be not marked as dirty */
--
drivers/md/raid0.c=683=static void *raid0_takeover_raid10(struct mddev *mddev)
--
drivers/md/raid0.c-713- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid0.c:714: mddev->delta_disks = - mddev->raid_disks / 2;
drivers/md/raid0.c:715: mddev->raid_disks += mddev->delta_disks;
drivers/md/raid0.c-716- mddev->degraded = 0;
--
drivers/md/raid0.c=725=static void *raid0_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid0.c-757- mddev->chunk_sectors = chunksect;
drivers/md/raid0.c:758: mddev->delta_disks = 1 - mddev->raid_disks;
drivers/md/raid0.c-759- mddev->raid_disks = 1;
--
drivers/md/raid1.c=3315=static int raid1_reshape(struct mddev *mddev)
--
drivers/md/raid1.c-3348-
drivers/md/raid1.c:3349: raid_disks = mddev->raid_disks + mddev->delta_disks;
drivers/md/raid1.c-3350-
--
drivers/md/raid1.c-3398- conf->raid_disks = mddev->raid_disks = raid_disks;
drivers/md/raid1.c:3399: mddev->delta_disks = 0;
drivers/md/raid1.c-3400-
--
drivers/md/raid10.c=3756=static int setup_geo(struct geom *geo, struct mddev *mddev, enum geo_type new)
--
drivers/md/raid10.c-3763- chunk = mddev->chunk_sectors;
drivers/md/raid10.c:3764: disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid10.c-3765- break;
--
drivers/md/raid10.c-3775- chunk = mddev->new_chunk_sectors;
drivers/md/raid10.c:3776: disks = mddev->raid_disks + mddev->delta_disks;
drivers/md/raid10.c-3777- break;
--
drivers/md/raid10.c=3828=static struct r10conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid10.c-3855- conf->mirrors = kzalloc_objs(struct raid10_info,
drivers/md/raid10.c:3856: mddev->raid_disks + max(0, -mddev->delta_disks));
drivers/md/raid10.c-3857- if (!conf->mirrors)
--
drivers/md/raid10.c=4180=static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
--
drivers/md/raid10.c-4196- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid10.c:4197: mddev->delta_disks = mddev->raid_disks;
drivers/md/raid10.c-4198- mddev->raid_disks *= 2;
--
drivers/md/raid10.c=4237=static int raid10_check_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4241- * - chunk size (to ->new_chunk_sectors)
drivers/md/raid10.c:4242: * - raid_disks (by delta_disks)
drivers/md/raid10.c-4243- * or when trying to restart a reshape that was ongoing.
--
drivers/md/raid10.c-4278- conf->mirrors_new = NULL;
drivers/md/raid10.c:4279: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4280- /* allocate new 'mirrors' list */
--
drivers/md/raid10.c-4282- kzalloc_objs(struct raid10_info,
drivers/md/raid10.c:4283: mddev->raid_disks + mddev->delta_disks);
drivers/md/raid10.c-4284- if (!conf->mirrors_new)
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4403-
drivers/md/raid10.c:4404: if (spares < mddev->delta_disks)
drivers/md/raid10.c-4405- return -EINVAL;
--
drivers/md/raid10.c-4407- conf->offset_diff = min_offset_diff;
drivers/md/raid10.c:4408: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4409- new_pool = create_r10bio_pool(new.raid_disks);
--
drivers/md/raid10.c-4439-
drivers/md/raid10.c:4440: if (mddev->delta_disks && mddev->bitmap) {
drivers/md/raid10.c-4441- struct mdp_superblock_1 *sb = NULL;
--
drivers/md/raid10.c-4482-out:
drivers/md/raid10.c:4483: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-4484- rdev_for_each(rdev, mddev)
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5055-
drivers/md/raid10.c:5056: if (mddev->delta_disks > 0) {
drivers/md/raid10.c-5057- if (mddev->resync_offset > mddev->resync_max_sectors) {
--
drivers/md/raid10.c-5064- for (d = conf->geo.raid_disks ;
drivers/md/raid10.c:5065: d < conf->geo.raid_disks - mddev->delta_disks;
drivers/md/raid10.c-5066- d++) {
--
drivers/md/raid10.c-5077- mddev->reshape_position = MaxSector;
drivers/md/raid10.c:5078: mddev->delta_disks = 0;
drivers/md/raid10.c-5079- mddev->reshape_backwards = 0;
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7728- else
drivers/md/raid5.c:7729: conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid5.c-7730- max_disks = max(conf->raid_disks, conf->previous_raid_disks);
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8062- }
drivers/md/raid5.c:8063: old_disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid5.c-8064- /* reshape_position must be on a new-stripe boundary, and one
--
drivers/md/raid5.c-8084- * from */
drivers/md/raid5.c:8085: if (mddev->delta_disks == 0) {
drivers/md/raid5.c-8086- /* We cannot be sure it is safe to start an in-place
--
drivers/md/raid5.c-8116- BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
drivers/md/raid5.c:8117: BUG_ON(mddev->delta_disks != 0);
drivers/md/raid5.c-8118- }
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8591- return -EINVAL;
drivers/md/raid5.c:8592: if (mddev->delta_disks == 0 &&
drivers/md/raid5.c-8593- mddev->new_layout == mddev->layout &&
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
--
drivers/md/raid5.c-8608- min = 4;
]
|
| 197/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 41044
output: 38
thoughts: 37
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Investigating `raid10_run`'s Functionality**
Alright, I need to get a handle on what's going on with this new RAID implementation, and I want a comparison. Let me pivot and see how `raid10_run` behaves within the `drivers/md/raid10.c` context. Is it going to be like the implementation Iβm used to with `raid5_run`? Itβs probably similar in some ways, given the underlying goal of data protection and striping, but I need to understand the nuances of how RAID 10's mirrored and striped architecture translates to the low-level execution logic. I'm expecting some significant differences in the data layout and access patterns, especially in the write paths, but it's always a good starting point to identify the commonalities and then hone in on the specific algorithmic optimizations. Let's see...
|
| 198/4 |
2026/09/09 20:40 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid10.c Name:raid10_run]
Results: map[SourceCode:3943: static int raid10_run(struct mddev *mddev)
3944: {
3945: struct r10conf *conf;
3946: int i, disk_idx;
3947: struct raid10_info *disk;
3948: struct md_rdev *rdev;
3949: sector_t size;
3950: sector_t min_offset_diff = 0;
3951: int first = 1;
3952: int ret = -EIO;
3953:
3954: if (mddev->private == NULL) {
3955: conf = setup_conf(mddev);
3956: if (IS_ERR(conf))
3957: return PTR_ERR(conf);
3958: mddev->private = conf;
3959: }
3960: conf = mddev->private;
3961: if (!conf)
3962: goto out;
3963:
3964: rcu_assign_pointer(mddev->thread, conf->thread);
3965: rcu_assign_pointer(conf->thread, NULL);
3966:
3967: if (mddev_is_clustered(conf->mddev)) {
3968: int fc, fo;
3969:
3970: fc = (mddev->layout >> 8) & 255;
3971: fo = mddev->layout & (1<<16);
3972: if (fc > 1 || fo > 0) {
3973: pr_err("only near layout is supported by clustered"
3974: " raid10\n");
3975: goto out_free_conf;
3976: }
3977: }
3978:
3979: rdev_for_each(rdev, mddev) {
3980: long long diff;
3981:
3982: disk_idx = rdev->raid_disk;
3983: if (disk_idx < 0)
3984: continue;
3985: if (disk_idx >= conf->geo.raid_disks &&
3986: disk_idx >= conf->prev.raid_disks)
3987: continue;
3988: disk = conf->mirrors + disk_idx;
3989:
3990: if (test_bit(Replacement, &rdev->flags)) {
3991: if (disk->replacement)
3992: goto out_free_conf;
3993: disk->replacement = rdev;
3994: } else {
3995: if (disk->rdev)
3996: goto out_free_conf;
3997: disk->rdev = rdev;
3998: }
3999: diff = (rdev->new_data_offset - rdev->data_offset);
4000: if (!mddev->reshape_backwards)
4001: diff = -diff;
4002: if (diff < 0)
4003: diff = 0;
4004: if (first || diff < min_offset_diff)
4005: min_offset_diff = diff;
4006:
4007: disk->head_position = 0;
4008: first = 0;
4009: }
4010:
4011: if (!mddev_is_dm(conf->mddev)) {
4012: int err = raid10_set_queue_limits(mddev);
4013:
4014: if (err) {
4015: ret = err;
4016: goto out_free_conf;
4017: }
4018: }
4019:
4020: /* need to check that every block has at least one working mirror */
4021: if (!enough(conf, -1)) {
4022: pr_err("md/raid10:%s: not enough operational mirrors.\n",
4023: mdname(mddev));
4024: goto out_free_conf;
4025: }
4026:
4027: if (conf->reshape_progress != MaxSector) {
4028: /* must ensure that shape change is supported */
4029: if (conf->geo.far_copies != 1 &&
4030: conf->geo.far_offset == 0)
4031: goto out_free_conf;
4032: if (conf->prev.far_copies != 1 &&
4033: conf->prev.far_offset == 0)
4034: goto out_free_conf;
4035: }
4036:
4037: mddev->degraded = 0;
4038: for (i = 0;
4039: i < conf->geo.raid_disks
4040: || i < conf->prev.raid_disks;
4041: i++) {
4042:
4043: disk = conf->mirrors + i;
4044:
4045: if (!disk->rdev && disk->replacement) {
4046: /* The replacement is all we have - use it */
4047: disk->rdev = disk->replacement;
4048: disk->replacement = NULL;
4049: clear_bit(Replacement, &disk->rdev->flags);
4050: }
4051:
4052: if (!disk->rdev ||
4053: !test_bit(In_sync, &disk->rdev->flags)) {
4054: disk->head_position = 0;
4055: mddev->degraded++;
4056: if (disk->rdev &&
4057: disk->rdev->saved_raid_disk < 0)
4058: conf->fullsync = 1;
4059: }
4060:
4061: if (disk->replacement &&
4062: !test_bit(In_sync, &disk->replacement->flags) &&
4063: disk->replacement->saved_raid_disk < 0) {
4064: conf->fullsync = 1;
4065: }
4066: }
4067:
4068: if (mddev->resync_offset != MaxSector)
4069: pr_notice("md/raid10:%s: not clean -- starting background reconstruction\n",
4070: mdname(mddev));
4071: pr_info("md/raid10:%s: active with %d out of %d devices\n",
4072: mdname(mddev), conf->geo.raid_disks - mddev->degraded,
4073: conf->geo.raid_disks);
4074: /*
4075: * Ok, everything is just fine now
4076: */
4077: mddev->dev_sectors = conf->dev_sectors;
4078: size = raid10_size(mddev, 0, 0);
4079: md_set_array_sectors(mddev, size);
4080: mddev->resync_max_sectors = size;
4081: set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags);
4082:
4083: if (md_integrity_register(mddev))
4084: goto out_free_conf;
4085:
4086: if (conf->reshape_progress != MaxSector) {
4087: unsigned long before_length, after_length;
4088:
4089: before_length = ((1 << conf->prev.chunk_shift) *
4090: conf->prev.far_copies);
4091: after_length = ((1 << conf->geo.chunk_shift) *
4092: conf->geo.far_copies);
4093:
4094: if (max(before_length, after_length) > min_offset_diff) {
4095: /* This cannot work */
4096: pr_warn("md/raid10: offset difference not enough to continue reshape\n");
4097: goto out_free_conf;
4098: }
4099: conf->offset_diff = min_offset_diff;
4100:
4101: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
4102: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
4103: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
4104: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
4105: }
4106:
4107: return 0;
4108:
4109: out_free_conf:
4110: md_unregister_thread(mddev, &mddev->thread);
4111: raid10_free_conf(conf);
4112: mddev->private = NULL;
4113: out:
4114: return ret;
4115: }
SourceFile:drivers/md/raid10.c]
|
| 199/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 43923
output: 50
thoughts: 518
Thoughts: **Raid10: A Deep Dive into Configuration and Potential Stale Data**
Okay, so I'm looking at the `setup_conf(mddev)` function within the RAID10 implementation. The core issue here seems to be around how the geometry is set up, particularly in relation to reshaping and disk changes. When `reshape_progress` is equal to `MaxSector`, the code uses `geo_start`. This part seems fine. However, my intuition is telling me to dig deeper...
I'm focusing on how `delta_disks` plays into this because, during this start phase, it's ignored. But, I know from experience that this kind of detail can bite you later. Then I saw this on line 3855 in `raid10.c`: `conf->mirrors = kzalloc_objs(struct raid10_info, mddev->raid_disks + max(0, -mddev->delta_disks));`.
Aha! It's allocating extra, potentially unused, slots based on `-mddev->delta_disks` if `delta_disks` is negative. This is where my alarm bells are starting to ring.
The critical issue is, what if `delta_disks` is negative? If it is, that's fine for the start, but if the reshaping gets cancelled, the value of that variable is stale. The next time reshape or finish_reshape is called, they might use the negative value, and there may be weirdness that results.
I'm thinking about the implications. What happens with this stale data later on? Reshape or finish_reshape might pick up that negative value. The question becomes, is this information used in any subsequent calculations or operations? I'm imagining a scenario where unused slots were allocated, but the logic might not account for them correctly during the reshape process.
I need to confirm if `md_clean(mddev)` might be called elsewhere.
I also need to check again how `__md_stop()` works, to see if the values are cleaned and set to defaults there.
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
```
|
| 200/4 |
2026/09/09 20:40 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:5 Name:md_clean SourceTreePrefix:drivers/md]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7224 SourceSnippet:7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
]] TruncatedOutput:false]
|
| 201/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 45323
output: 36
thoughts: 34
Thoughts: Here's my summary, as though I'm reading and processing the provided code information:
**Analyzing the `do_md_stop` Function in `md.c`**
Okay, let's dive into the `do_md_stop` function within `drivers/md/md.c`, specifically focusing on lines 7160 through 7235. My initial expectation is this function handles the critical process of gracefully shutting down a Multi-Device (MD) array. Given the MD subsystem's complexity, I'm anticipating to find logic dealing with tasks such as:
* **Handling State Transitions:** The function likely orchestrates the transition of the MD array from an active or degraded state to a stopped or idle state. This probably involves carefully managing the synchronization and data integrity.
* **Device Unregistration:** I'm going to look for code that unregisters underlying devices or components managed by the MD array. This could include unmapping devices, freeing up resources, and potentially calling into other MD layer functions.
* **Data Flushing and Synchronization:** A key aspect here is ensuring all pending I/O operations are completed or gracefully terminated to prevent data loss or corruption. I expect to see mechanisms for flushing caches or committing any pending writes.
* **Error Handling:** The code has to be robust. I'm expecting checks for various error conditions during the shutdown process, such as device failures or resource unavailability. I'll be looking to see how it handles these situations.
* **Locking and Synchronization:** Given that MD arrays are inherently multi-threaded, I'll be looking for any necessary locking mechanisms to prevent race conditions or data corruption during the stop procedure.
* **Cleanup Operations:** Finally, this function should be responsible for releasing memory, deallocating structures, and cleaning up any remaining state associated with the MD array. This is the cleanup step that finishes the process.
Let's see if those expectations are met. I'll carefully analyze the code within this range to get a full view of how the shutdown sequence is handled and if the error cases are covered.
|
| 202/4 |
2026/09/09 20:40 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7160 LineCount:75]
Results: map[Contents:7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
7232:
7233: #ifndef MODULE
7234: static void autorun_array(struct mddev *mddev)
]
|
| 203/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 46987
output: 36
thoughts: 385
Thoughts: **Analyzing the `do_md_stop()` Function**
Okay, let's break this down. I'm focusing on the `do_md_stop()` function, specifically how it handles different scenarios when an MD array is being stopped. I'm looking at the code in the context of the underlying MD subsystem.
First, I'm examining the block where the array is in mode 2 (or mode 0 with a persistent device): I see the code block from lines 7184 to 7207. Here, if `mddev->pers` exists (indicating a persistent device/metadata) and the array isn't read-only, it clears the read-only flag on the underlying block device using `set_disk_ro`. If the stop is triggered by mode 2 and there is an active sync request, it marks the array for removal after the current sync. Then it calls `__md_stop_writes` and `__md_stop` to pause I/O. Crucially, it notifies userspace about the state change (becoming "inactive") using `sysfs_notify_dirent_safe()`. I see that the code then unlinks the raid devices from the sysfs, sets the capacity to zero (`set_capacity_and_notify`), marks the array as changed and if it was read-only, the code resets it to read-write mode.
Now, if `mode` is 0, there's additional cleanup. I note the `pr_info` message indicating the array is stopped, followed by some omitted code and finally a call to `export_array()` and `md_clean()`. That's where things get interesting.
I need to understand what `md_clean()` actually *does*. I'm going to jump to line 6967 to get a closer look at the actual cleanup function. I anticipate it will handle releasing resources and clearing persistent metadata.
|
| 204/4 |
2026/09/09 20:40 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6965 LineCount:50]
Results: map[Contents:6965: }
6966:
6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
]
|
| 205/4 |
2026/09/09 20:40 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 48726
output: 36
thoughts: 1234
Thoughts: **Analyzing the State Transitions of a Reshape on an MD Array**
Okay, let's break this down systematically. I'm looking at the implications of `md_clean()` when an array is disassembled (mode 0), and more importantly, what happens when it's *inactive* (mode 2). It's crucial to understand how reshape operations behave across these states.
First, in mode 2, it's clear that the array doesn't get completely torn down. Structures like `mddev->raid_disks`, `mddev->level`, `mddev->chunk_sectors`, and `mddev->layout` remain valid, even though `sysfs_unlink_rdev()` might have run to detach the disks. This immediately raises the question: what about an in-progress reshape at the moment mode 2 is invoked?
If a reshape was *active* (`mddev->reshape_position != MaxSector`), we need to preserve its state. That means `mddev->reshape_position` needs to be saved, of course. Critically, `mddev->delta_disks`, `mddev->reshape_backwards`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors` must also be maintained. We need this information to successfully resume the reshape when the array becomes active again.
However, if `mddev->reshape_position == MaxSector`, it means no reshape was actually underway. Any prior reshape request (e.g., via `raid_disks`, `layout`, or `chunk_size` sysfs writes) was merely a pending, in-memory state, essentially just a *plan* for the next time the array was active. Since the array is now stopped (`__md_stop()`), and the reshape never started, these pending reshape parameters are effectively aborted and *must* be reset. We need to sync them to the actual current values of the array. The code correctly handles this by resetting `delta_disks`, `reshape_backwards`, and setting `new_level`, `new_layout`, and `new_chunk_sectors` to the current array values, effectively cancelling the potential previous reshape.
Now, let's consider the edge case where `mddev->pers` is NULL and sysfs is modified. We need to see how the sysfs store functions behave under that condition. Specifically, I'll be looking at the behavior of the sysfs store functions if `mddev->pers == NULL`.
1. `raid_disks_store`: If `pers` is NULL and `reshape_position == MaxSector`, `mddev->raid_disks` is simply updated. Crucially, `delta_disks` is NOT set. That's fine.
2. `layout_store`: If `pers` is NULL and `reshape_position == MaxSector`, both `new_layout` and `layout` are updated. They remain consistent.
3. `chunk_size_store`: The same applies here. `new_chunk_sectors` and `chunk_sectors` are updated, and they remain equal.
4. `new_level_store`: The `cmd_match(buf, "reshape")` branch depends on `mddev->pers->start_reshape`. If `pers` is NULL, then that particular reshape path is not available. Also, it's safe to note that if `pers == NULL` the other branch of `new_level_store` would not do reshape either.
This analysis confirms that the code handles the inactive state and pending reshape requests in a consistent and robust manner, especially when `mddev->pers` is NULL.
|
| 206/4 |
2026/09/09 20:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:new_level_store]
Results: map[SourceCode:4254: static ssize_t
4255: new_level_store(struct mddev *mddev, const char *buf, size_t len)
4256: {
4257: unsigned int n;
4258: int err;
4259:
4260: err = kstrtouint(buf, 10, &n);
4261: if (err < 0)
4262: return err;
4263: err = mddev_lock(mddev);
4264: if (err)
4265: return err;
4266:
4267: mddev->new_level = n;
4268: md_update_sb(mddev, 1);
4269:
4270: mddev_unlock(mddev);
4271: return len;
4272: }
SourceFile:drivers/md/md.c]
|
| 207/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 51062
output: 52
thoughts: 135
Thoughts: **My Concerns Regarding the `new_level` Attribute**
Okay, so `new_level_store` is setting `mddev->new_level = n;`. My initial thought is, "Wait a minute, what happens if someone tries to write to `new_level` while the array isn't active?". And, what if it *is* written to while the array is inactive? This seems like a potential race condition. This feels like a bad place.
Hold on, there's another scenario. What if `mddev->reshape_position` is already at `MaxSector` and the array *is* active, and then someone sets `new_level`? That feels like it could mess things up too! I need to be careful.
Right, so the sysfs attribute for `new_level` essentially allows someone to set `mddev->new_level = n;`. I really need to understand the implications of this. I have an understanding of where it's being set. But what the heck is the attribute even *used* for? Let's check out that `new_level` sysfs attribute and dig in a bit further!
|
| 208/4 |
2026/09/09 20:41 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:5 Name:new_level_store SourceTreePrefix:drivers/md]
Results: map[References:[map[ReferenceKind:takes-address-of ReferencingEntityKind:global_variable ReferencingEntityName:md_new_level SourceFile:drivers/md/md.c SourceLine:4274 SourceSnippet:4273: static struct md_sysfs_entry md_new_level =
4274: __ATTR(new_level, 0664, new_level_show, new_level_store);
]] TruncatedOutput:false]
|
| 209/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 51630
output: 36
thoughts: 17
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Diving into `level_store`**
Okay, let's zero in on `level_store` around line 4047. My spider sense is tingling β something feels off there, and the context around that specific line likely holds the key. I need to refresh my memory on what's happening at that point in the code. I'm going to quickly review the surrounding functionality. Is this where we're experiencing that write-amplification bug? Or perhaps a concurrency issue with multiple reads/writes on the same segment? Whatever it is, that specific line number is likely the epicenter of the issue I'm chasing. Time to get my mental debugger fired up. I'm hoping I can trace the root cause without having to break out the heavy-duty instrumentation.
|
| 210/4 |
2026/09/09 20:41 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4045 LineCount:40]
Results: map[Contents:4045:
4046: static ssize_t
4047: level_store(struct mddev *mddev, const char *buf, size_t len)
4048: {
4049: char clevel[16];
4050: ssize_t rv;
4051: size_t slen = len;
4052: unsigned int noio_flags;
4053: struct md_personality *pers, *oldpers;
4054: long level;
4055: void *priv, *oldpriv;
4056: struct md_rdev *rdev;
4057:
4058: if (slen == 0 || slen >= sizeof(clevel))
4059: return -EINVAL;
4060:
4061: rv = mddev_suspend_and_lock(mddev);
4062: if (rv)
4063: return rv;
4064: noio_flags = memalloc_noio_save();
4065:
4066: if (mddev->pers == NULL) {
4067: memcpy(mddev->clevel, buf, slen);
4068: if (mddev->clevel[slen-1] == '\n')
4069: slen--;
4070: mddev->clevel[slen] = 0;
4071: mddev->level = LEVEL_NONE;
4072: rv = len;
4073: goto out_unlock;
4074: }
4075: rv = -EROFS;
4076: if (!md_is_rdwr(mddev))
4077: goto out_unlock;
4078:
4079: /* request to change the personality. Need to ensure:
4080: * - array is not engaged in resync/recovery/reshape
4081: * - old personality can be suspended
4082: * - new personality will access other array.
4083: */
4084:
]
|
| 211/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 52442
output: 26
thoughts: 1338
Thoughts: **Investigating a Potential RAID5 Bug: Level Mismatch During Array Activation**
Okay, let's break this down. My initial thought process is leading me down a potential rabbit hole regarding the MD subsystem, specifically with RAID5. I'm focusing on a possible race condition or inconsistency in how the array level (e.g., RAID level) is handled during activation.
First, I examined lines 4066-4074 in `level_store`. This code block sets `mddev->level` when the array isn't active, essentially "prepping" it. Then, I cross-referenced this with `md_run`, which retrieves the personality and compares the current and new levels. I also noted that `raid5_run` has a `BUG_ON` check: `BUG_ON(mddev->level != mddev->new_level);`. This feels like the critical area.
Next, I checked `__md_stop()`. This routine clears the personality from the `mddev` when stopping the array. Importantly, it resets `mddev->reshape_position` under a certain condition; this is the key. And it's set to `MaxSector` if no reshape is in progress.
Now, this raised a flag: I started to wonder if `mddev->reshape_position` is ALWAYS `MaxSector` when no reshape is running, I started checking all the places where `reshape_position` is initialized or modified. After carefully analyzing all usages of `reshape_position` initialization or update, it seems my hunch is correct - `mddev->reshape_position == MaxSector` does seem to be the invariant across the entire MD subsystem indicating that reshape is NOT in progress. This confirms that this value is a reliable indicator that reshape isn't happening.
Now, I went back to `raid5_run`. This is where the issue potentially lies. I noticed there's a specific check:
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
...
}
```
If reshape is *not* running, the `BUG_ON` fires if the current and new levels don't match. This is the crux of the problem.
My next line of thought is: could invalid values be written to the sysfs attributes, specifically to `new_level` when the array is inactive? If so, this could lead to a `level` vs `new_level` mismatch.
I checked `new_level_store`:
```c
static ssize_t
new_level_store(struct mddev *mddev, const char *buf, size_t len)
{
unsigned int n;
int err;
err = kstrtouint(buf, 10, &n);
if (err < 0)
return err;
err = mddev_lock(mddev);
if (err)
return err;
mddev->new_level = n;
md_update_sb(mddev, 1);
mddev_unlock(mddev);
return len;
}
```
Bingo! If the array is inactive, it seems a user can write an arbitrary value to `new_level` using sysfs (e.g., `echo 4 > new_level`). Then, when the array is later activated (via `md_run`), `raid5_run` is called. If that `new_level` is different from the current `level`, and `reshape_position` is at `MaxSector` then the `BUG_ON` will be triggered. This is a potential bug! A user could trigger a kernel panic.
The next question: Why a `BUG_ON` instead of returning `-EINVAL`? Could it be better to fail gracefully, and not panic the system? Is this a place for a potential patch? Should the function be changed to `return -EINVAL`? Or is the current `BUG_ON` a valid check for some reason? And the `BUG_ON` likely isn't the intended behaviour.
The final step: I'll need to check the history and see if any past commits may be related to this issue. The commit `305a5170dc5c` is the next item to investigate, as it may provide some crucial context.
|
| 212/4 |
2026/09/09 20:41 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Jun 11 21:22:51 2024 +0800
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 013adc5ba0e1..547fd15115cd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -6254,7 +6254,9 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->reshape_backwards) {
- BUG_ON(writepos < reshape_sectors);
+ if (WARN_ON(writepos < reshape_sectors))
+ return MaxSector;
+
writepos -= reshape_sectors;
readpos += reshape_sectors;
safepos += reshape_sectors;
@@ -6272,14 +6274,18 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
* to set 'stripe_addr' which is where we will write to.
*/
if (mddev->reshape_backwards) {
- BUG_ON(conf->reshape_progress == 0);
+ if (WARN_ON(conf->reshape_progress == 0))
+ return MaxSector;
+
stripe_addr = writepos;
- BUG_ON((mddev->dev_sectors &
- ~((sector_t)reshape_sectors - 1))
- - reshape_sectors - stripe_addr
- != sector_nr);
+ if (WARN_ON((mddev->dev_sectors &
+ ~((sector_t)reshape_sectors - 1)) -
+ reshape_sectors - stripe_addr != sector_nr))
+ return MaxSector;
} else {
- BUG_ON(writepos != sector_nr + reshape_sectors);
+ if (WARN_ON(writepos != sector_nr + reshape_sectors))
+ return MaxSector;
+
stripe_addr = sector_nr;
}
]
|
| 213/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 55990
output: 36
thoughts: 2525
Thoughts: **Analyzing the RAID Reshape Bug and Proposed Fix**
Okay, so this commit addresses a crash in the RAID5 code related to in-progress reshapes and array deactivation. The root cause, as I understand it, is that when an MD array is stopped (deactivated) *before* a reshape actually begins, the pending reshape parameters (like the number of disks to add, new layout, etc.) aren't cleared. This leaves stale data in the `mddev` structure. Later, when the array is restarted, `raid5_run()` checks for these pending parameters assuming no reshape is in progress, and the stale parameters trigger a `BUG_ON`. The proposed fix involves clearing these parameters within `__md_stop()` when `mddev->reshape_position` is `MaxSector`, which indicates that a reshape hasn't actually started.
Now, looking at the code, my initial reaction was that the commit seems correct as presented. However, to ensure a robust fix and address the core issue holistically, I need to consider the broader context within `drivers/md/md.c`. I have to ask myself, where else might this same problem occur? Are there other places in the code where an array is stopped, a personality is detached, or some kind of abort condition arises where pending reshape parameters could be left dangling?
I reviewed the `__md_stop()` function and confirmed that both call sites, `do_md_stop()` and `md_stop()`, are properly covered by the proposed change. Then I started to look at where else arrays are handled, specifically checking `md_run()` and `bitmap_abort`. It seems like `bitmap_abort` does not call `__md_stop()` which means the proposed fix is not implemented in that specific path. However, after carefully reading the code I see that, `mddev->pers` is set only AFTER the bitmap creation and that during a `bitmap_abort`, `mddev->pers` is NULL so calling `__md_stop()` would cause a crash. So, the code correctly skips this call in this particular case.
The interesting case is when `do_md_stop()` is called with `mode == 0`. In that case, `__md_stop()` *is* called, and then `md_clean()` is called which zeroes everything. This means that if `reshape_position == MaxSector` the fields are reset, and then in `md_clean` everything is zeroed out. If `reshape_position != MaxSector`, the fields are untouched, but `md_clean` will also clear them because the whole array will be dismantled. So, in this case, everything works as expected. The critical case is where `mode == 2`, because the array is just deactivated, not fully stopped. In this case, `__md_stop()` is called and if `reshape_position == MaxSector`, it cleans up the pending reshape parameters, which is the exact intended behavior.
And then, I took a look at `md_stop()` that is called from the `dm-raid` and found that this also calls `__md_stop()`.
Finally, to be really thorough, I checked `md_set_readonly()` and other functions in `drivers/md/md.c` that might touch on array state changes, but it doesn't seem like any other function is impacted.
So, it seems that the proposed fix is correct and sufficiently targeted, and there aren't any obvious extensions or side effects to worry about. The only location that could have been potentially problematic is `bitmap_abort`, which is already handled, and other relevant functions are correctly covered. This change seems to be the best way to address the root cause of the bug in a simple, direct, and safe manner.
|
| 214/4 |
2026/09/09 20:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_set_readonly]
Results: map[SourceCode:7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
7115: {
7116: int err = 0;
7117: int did_freeze = 0;
7118:
7119: if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
7120: return -EBUSY;
7121:
7122: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7123: did_freeze = 1;
7124: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7125: }
7126:
7127: stop_sync_thread(mddev, false);
7128: wait_event(mddev->sb_wait,
7129: !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
7130: mddev_lock_nointr(mddev);
7131:
7132: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7133: pr_warn("md: %s still in use.\n",mdname(mddev));
7134: err = -EBUSY;
7135: goto out;
7136: }
7137:
7138: __md_stop_writes(mddev);
7139:
7140: if (mddev->ro == MD_RDONLY) {
7141: err = -ENXIO;
7142: goto out;
7143: }
7144:
7145: mddev->ro = MD_RDONLY;
7146: set_disk_ro(mddev->gendisk, 1);
7147:
7148: out:
7149: if (!err || did_freeze) {
7150: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7151: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7152: sysfs_notify_dirent_safe(mddev->sysfs_state);
7153: }
7154:
7155: return err;
7156: }
SourceFile:drivers/md/md.c]
|
| 215/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 60054
output: 36
thoughts: 89
Thoughts: Here's my thought process, as it relates to the kernel code:
**Thinking Through `md_set_readonly` and Personality Detachment**
Okay, so `md_set_readonly` only sets the `mddev->ro` flag to `MD_RDONLY`. It *doesn't* actually detach the personality (`mddev->pers`). That's important to remember. The personality stays firmly attached, which makes sense from a performance perspective and avoids unnecessary overhead.
But hang on a minute... what happens if a personality change *fails* within `level_store`? I need to refresh my memory on the error handling there. Let me jump into `drivers/md/md.c` and take a look at the `level_store()` function, specifically around lines 4130 through 4165. I'll focus on the error paths to understand if the personality gets properly cleaned up in case of failure. I need to make sure there aren't any potential leaks or inconsistencies in the RAID state when a personality change is attempted but doesn't succeed. That's a critical point to audit.
|
| 216/4 |
2026/09/09 20:41 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4125 LineCount:45]
Results: map[Contents:4125: goto out_unlock;
4126: }
4127:
4128: rdev_for_each(rdev, mddev)
4129: rdev->new_raid_disk = rdev->raid_disk;
4130:
4131: /* ->takeover must set new_* and/or delta_disks
4132: * if it succeeds, and may set them when it fails.
4133: */
4134: priv = pers->takeover(mddev);
4135: if (IS_ERR(priv)) {
4136: mddev->new_level = mddev->level;
4137: mddev->new_layout = mddev->layout;
4138: mddev->new_chunk_sectors = mddev->chunk_sectors;
4139: mddev->raid_disks -= mddev->delta_disks;
4140: mddev->delta_disks = 0;
4141: mddev->reshape_backwards = 0;
4142: put_pers(pers);
4143: pr_warn("md: %s: %s would not accept array\n",
4144: mdname(mddev), clevel);
4145: rv = PTR_ERR(priv);
4146: goto out_unlock;
4147: }
4148:
4149: /* Looks like we have a winner */
4150: mddev_detach(mddev);
4151:
4152: spin_lock(&mddev->lock);
4153: oldpers = mddev->pers;
4154: oldpriv = mddev->private;
4155: mddev->pers = pers;
4156: mddev->private = priv;
4157: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
4158: mddev->level = mddev->new_level;
4159: mddev->layout = mddev->new_layout;
4160: mddev->chunk_sectors = mddev->new_chunk_sectors;
4161: mddev->delta_disks = 0;
4162: mddev->reshape_backwards = 0;
4163: mddev->degraded = 0;
4164: spin_unlock(&mddev->lock);
4165:
4166: if (oldpers->sync_request == NULL &&
4167: mddev->external) {
4168: /* We are converting from a no-redundancy array
4169: * to a redundancy array and metadata is managed
]
|
| 217/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 61150
output: 33
thoughts: 880
Thoughts: **Analyzing Reshape State Transitions in the MD Layer**
Okay, let's break this down. I'm focusing on how the MD layer handles reshape operations and the consistency of its state. The initial focus is on the `level_store()` function in the `md` driver, which is crucial for handling changes to the RAID level. If an error occurs during the update β specifically if the personality update fails β the `level_store()` function performs a complete *rollback*. It resets `mddev->new_level`, `mddev->new_layout`, `mddev->new_chunk_sectors`, and other associated parameters to their original values, essentially aborting the proposed level change. This is essential for maintaining data integrity. It's a clean failure, which is exactly what I'd expect.
Conversely, if the level update is successful, the subsequent lines *apply* the new values: `mddev->level`, `mddev->layout`, and `mddev->chunk_sectors` are updated with the new configuration. `delta_disks` and `reshape_backwards` are reset. This reinforces that the write is "atomic" from the perspective of the application.
Next, I examined `reshape_position_store()`. In this function, the `mddev->reshape_position` is updated. Notably, similar to `level_store()`, it resets `delta_disks` and `reshape_backwards` to `0`, and then it *copies* the current array information (`level`, `layout`, and `chunk_sectors`) into the *new* fields. So, it appears that the store is effectively resetting the values to their defaults while preparing for a new reshape (though it isn't actually *initiating* the reshape). The function is setting up the reshape parameters so that it is properly set later.
I've also observed that `md_set_array_info()` follows a similar pattern, resetting the `delta_disks` and `reshape_backwards` to 0, which further consolidates my understanding of the state reset after array information is set.
Now, let's shift to `__md_stop()`. This is particularly interesting. Here, the personality is detached (which is obviously the right behavior when the array is stopping). What catches my eye is the conditional reset of reshape parameters: if `mddev->reshape_position == MaxSector`, it means no active reshape is underway. In this "idle" state, it resets the reshape parameters (`delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, `new_chunk_sectors`) back to their *current* values. So the reshape is *not* occurring. This is essentially an *abort* of pending reshape operations that haven't been initiated. It's a crucial cleanup mechanism, ensuring that if a stop occurs before a reshape begins, the device doesn't retain stale or erroneous reshape parameters.
My intuition tells me that I need to ensure that the logic is correct on a full stop of the device. This code confirms my intuition that there must be safeguards in place to ensure a clean state upon device shutdown or personality detachment.
Finally, I need to check the full `struct mddev` definition in `drivers/md/md.h` to make sure I haven't missed anything related to reshape. I need to get a holistic view.
|
| 218/4 |
2026/09/09 20:41 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.h Name:mddev]
Results: map[SourceCode: 407: struct mddev {
408: void *private;
409: struct md_personality *pers;
410: dev_t unit;
411: int md_minor;
412: struct list_head disks;
413: unsigned long flags;
414: unsigned long sb_flags;
415:
416: int suspended;
417: struct mutex suspend_mutex;
418: struct percpu_ref active_io;
419: int ro;
420: int sysfs_active; /* set when sysfs deletes
421: * are happening, so run/
422: * takeover/stop are not safe
423: */
424: struct gendisk *gendisk; /* mdraid gendisk */
425: struct gendisk *dm_gendisk; /* dm-raid gendisk */
426:
427: struct kobject kobj;
428: int hold_active;
429: #define UNTIL_IOCTL 1
430: #define UNTIL_STOP 2
431:
432: /* Superblock information */
433: int major_version,
434: minor_version,
435: patch_version;
436: int persistent;
437: int external; /* metadata is
438: * managed externally */
439: char metadata_type[17]; /* externally set*/
440: int chunk_sectors;
441: time64_t ctime, utime;
442: int level, layout;
443: char clevel[16];
444: int raid_disks;
445: int max_disks;
446: sector_t dev_sectors; /* used size of
447: * component devices */
448: sector_t array_sectors; /* exported array size */
449: int external_size; /* size managed
450: * externally */
451: unsigned int logical_block_size;
452: __u64 events;
453: /* If the last 'event' was simply a clean->dirty transition, and
454: * we didn't write it to the spares, then it is safe and simple
455: * to just decrement the event count on a dirty->clean transition.
456: * So we record that possibility here.
457: */
458: int can_decrease_events;
459:
460: char uuid[16];
461:
462: /* If the array is being reshaped, we need to record the
463: * new shape and an indication of where we are up to.
464: * This is written to the superblock.
465: * If reshape_position is MaxSector, then no reshape is happening (yet).
466: */
467: sector_t reshape_position;
468: int delta_disks, new_level, new_layout;
469: int new_chunk_sectors;
470: int reshape_backwards;
471:
472: struct md_thread __rcu *thread; /* management thread */
473: struct md_thread __rcu *sync_thread; /* doing resync or reconstruct */
474:
475: /*
476: * Set when a sync operation is started. It holds this value even
477: * when the sync thread is "frozen" (interrupted) or "idle" (stopped
478: * or finished). It is overwritten when a new sync operation is begun.
479: */
480: enum sync_action last_sync_action;
481: sector_t curr_resync; /* last block scheduled */
482: /* As resync requests can complete out of order, we cannot easily track
483: * how much resync has been completed. So we occasionally pause until
484: * everything completes, then set curr_resync_completed to curr_resync.
485: * As such it may be well behind the real resync mark, but it is a value
486: * we are certain of.
487: */
488: sector_t curr_resync_completed;
489: unsigned long resync_mark; /* a recent timestamp */
490: sector_t resync_mark_cnt;/* blocks written at resync_mark */
491: sector_t curr_mark_cnt; /* blocks scheduled now */
492:
493: sector_t resync_max_sectors; /* may be set by personality */
494:
495: atomic64_t resync_mismatches; /* count of sectors where
496: * parity/replica mismatch found
497: */
498:
499: /* allow user-space to request suspension of IO to regions of the array */
500: sector_t suspend_lo;
501: sector_t suspend_hi;
502: /* if zero, use the system-wide default */
503: int sync_speed_min;
504: int sync_speed_max;
505: int sync_io_depth;
506:
507: /* resync even though the same disks are shared among md-devices */
508: int parallel_resync;
509:
510: int ok_start_degraded;
511:
512: unsigned long recovery;
513:
514: int in_sync; /* know to not need resync */
515: /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
516: * that we are never stopping an array while it is open.
517: * 'reconfig_mutex' protects all other reconfiguration.
518: * These locks are separate due to conflicting interactions
519: * with disk->open_mutex.
520: * Lock ordering is:
521: * reconfig_mutex -> disk->open_mutex
522: * disk->open_mutex -> open_mutex: e.g. __blkdev_get -> md_open
523: */
524: struct mutex open_mutex;
525: struct mutex reconfig_mutex;
526: atomic_t active; /* general refcount */
527: atomic_t openers; /* number of active opens */
528:
529: int changed; /* True if we might need to
530: * reread partition info */
531: int degraded; /* whether md should consider
532: * adding a spare
533: */
534:
535: unsigned long normal_io_events; /* IO event timestamp */
536: atomic_t recovery_active; /* blocks scheduled, but not written */
537: wait_queue_head_t recovery_wait;
538: sector_t resync_offset;
539: sector_t resync_min; /* user requested sync
540: * starts here */
541: sector_t resync_max; /* resync should pause
542: * when it gets here */
543:
544: struct kernfs_node *sysfs_state; /* handle for 'array_state'
545: * file in sysfs.
546: */
547: struct kernfs_node *sysfs_action; /* handle for 'sync_action' */
548: struct kernfs_node *sysfs_completed; /*handle for 'sync_completed' */
549: struct kernfs_node *sysfs_degraded; /*handle for 'degraded' */
550: struct kernfs_node *sysfs_level; /*handle for 'level' */
551:
552: /* used for delayed sysfs removal */
553: struct work_struct del_work;
554: /* used for register new sync thread */
555: struct work_struct sync_work;
556:
557: /* "lock" protects:
558: * flush_bio transition from NULL to !NULL
559: * rdev superblocks, events
560: * clearing MD_CHANGE_*
561: * in_sync - and related safemode and MD_CHANGE changes
562: * pers (also protected by reconfig_mutex and pending IO).
563: * clearing ->bitmap
564: * clearing ->bitmap_info.file
565: * changing ->resync_{min,max}
566: * setting MD_RECOVERY_RUNNING (which interacts with resync_{min,max})
567: */
568: spinlock_t lock;
569: wait_queue_head_t sb_wait; /* for waiting on superblock updates */
570: atomic_t pending_writes; /* number of active superblock writes */
571:
572: unsigned int safemode; /* if set, update "clean" superblock
573: * when no writes pending.
574: */
575: unsigned int safemode_delay;
576: struct timer_list safemode_timer;
577: struct percpu_ref writes_pending;
578: int sync_checkers; /* # of threads checking writes_pending */
579:
580: enum md_submodule_id bitmap_id;
581: void *bitmap; /* the bitmap for the device */
582: struct bitmap_operations *bitmap_ops;
583: struct {
584: struct file *file; /* the bitmap file */
585: loff_t offset; /* offset from superblock of
586: * start of bitmap. May be
587: * negative, but not '0'
588: * For external metadata, offset
589: * from start of device.
590: */
591: unsigned long space; /* space available at this offset */
592: loff_t default_offset; /* this is the offset to use when
593: * hot-adding a bitmap. It should
594: * eventually be settable by sysfs.
595: */
596: unsigned long default_space; /* space available at
597: * default offset */
598: struct mutex mutex;
599: unsigned long chunksize;
600: unsigned long daemon_sleep; /* how many jiffies between updates? */
601: unsigned long max_write_behind; /* write-behind mode */
602: int external;
603: int nodes; /* Maximum number of nodes in the cluster */
604: char cluster_name[64]; /* Name of the cluster */
605: } bitmap_info;
606:
607: atomic_t max_corr_read_errors; /* max read retries */
608: struct list_head all_mddevs;
609:
610: const struct attribute_group *to_remove;
611:
612: struct bio_set bio_set;
613: struct bio_set sync_set; /* for sync operations like
614: * metadata and bitmap writes
615: */
616: struct bio_set io_clone_set;
617:
618: struct work_struct event_work; /* used by dm to report failure event */
619: mempool_t *serial_info_pool;
620: void (*sync_super)(struct mddev *mddev, struct md_rdev *rdev);
621: struct md_cluster_info *cluster_info;
622: struct md_cluster_operations *cluster_ops;
623: unsigned int good_device_nr; /* good device num within cluster raid */
624:
625: /*
626: * Temporarily store rdev that will be finally removed when
627: * reconfig_mutex is unlocked, protected by reconfig_mutex.
628: */
629: struct list_head deleting;
630:
631: /* The sequence number for sync thread */
632: atomic_t sync_seq;
633: };
SourceFile:drivers/md/md.h]
|
| 219/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 66392
output: 36
thoughts: 3071
Thoughts: **Reshape Parameter Consistency and Potential Kernel Panic Vulnerability**
Okay, here's what I've got so far, working through this reshape logic in the RAID code. My primary concern is ensuring that the reshape parameters (`delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, `new_chunk_sectors`, and `reshape_position`) are consistent and handled correctly, especially during array starts and stops.
I've confirmed that when no reshape is happening (`reshape_position == MaxSector`), the parameters are, as expected, reset to their "initial" values (matching the current array configuration). I've reviewed `__md_stop()` and confirmed it *should* reset these parameters when stopping an array. I was initially worried that `bitmap_abort` could leave these stale, but it looks like the array is fully stopped and the parameters are cleaned.
I then started tracing the call stack from `autorun_array` to `do_md_run` and `md_run` to ensure that parameters are consistently checked and initialized before any RAID personality's `run` function gets a chance to see them. I confirmed that these parameters *should* be consistent when the array starts and when `pers->run` is called.
The key point here is that if the array is stopped, the `reshape_position` will be equal to `MaxSector`, and all other reshape parameters are reset.
Then I checked locking in `__md_stop` to make sure `reconfig_mutex` is held when called. I've confirmed that the critical sections around stopping the array are properly protected.
However, I've now identified a *serious* issue. I've been tracing the logic in `raid5_run` and noticed these `BUG_ON` checks:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
These `BUG_ON`s *should* be gone!
The problem is that the `new_level` parameter can be modified by an *unprivileged* user in the sysfs! A user can stop the array, change `new_level`, then start it. Since there is no validation of parameters when changing an arrayβs metadata (level or any of the other parameters) via sysfs, this results in a kernel crash due to those `BUG_ON` statements, or potential data corruption at the very least!
If those `BUG_ON` statements were replaced with a return of an error, this would not be a problem.
This is a pretty nasty vulnerability. Someone with sysfs write access can now reliably cause a kernel panic (or potentially data corruption) simply by modifying the `new_level` sysfs attribute after stopping an array. This is something that needs to be reported and fixed *immediately* by replacing the `BUG_ON` calls with more robust error handling and potentially validating the sysfs attribute changes. Also, the validation should happen *before* the parameters are written to disk.
|
| 220/4 |
2026/09/09 20:41 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4250 LineCount:35]
Results: map[Contents:4250: {
4251: return sprintf(page, "%d\n", mddev->new_level);
4252: }
4253:
4254: static ssize_t
4255: new_level_store(struct mddev *mddev, const char *buf, size_t len)
4256: {
4257: unsigned int n;
4258: int err;
4259:
4260: err = kstrtouint(buf, 10, &n);
4261: if (err < 0)
4262: return err;
4263: err = mddev_lock(mddev);
4264: if (err)
4265: return err;
4266:
4267: mddev->new_level = n;
4268: md_update_sb(mddev, 1);
4269:
4270: mddev_unlock(mddev);
4271: return len;
4272: }
4273: static struct md_sysfs_entry md_new_level =
4274: __ATTR(new_level, 0664, new_level_show, new_level_store);
4275:
4276: static ssize_t
4277: bitmap_type_show(struct mddev *mddev, char *page)
4278: {
4279: struct md_submodule_head *head;
4280: unsigned long i;
4281: ssize_t len = 0;
4282:
4283: if (mddev->bitmap_id == ID_BITMAP_NONE)
4284: len += sprintf(page + len, "[none] ");
]
|
| 221/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 70699
output: 38
thoughts: 80
Thoughts: Here's my summary, as though I'm thinking through this myself:
**Investigating `new_level_store` in the Linux MD RAID code**
Alright, let's take a look at this `new_level_store` function. It seems pretty straightforward on the surface β it's just setting `mddev->new_level = n` and then calling `md_update_sb`. Okay, but what *exactly* is the role of the `new_level` sysfs attribute supposed to be? I need more context. I can't just assume I understand the implications of this change without knowing *why* this value is being set. Time to dive into the documentation or, better yet, the git history for `new_level_store` to see where this is used and what purpose it serves. Need to understand the intent to understand the potential impact.
|
| 222/4 |
2026/09/09 20:41 |
tool |
git-log |
0m
Error:
Args: map[Count:5 PathPrefix:drivers/md/md.c SymbolName:new_level_store]
Results:
|
| 223/4 |
2026/09/09 20:41 |
llm |
patch-generator-compressor |
0m
Model:
Reply: ### 1. Approaches Explored and Results
- **Crash Analysis**:
- Syzkaller hit `kernel BUG at drivers/md/raid5.c:8117!` inside `raid5_run()`:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH triggered here
```
- Trigger sequence:
1. Active RAID5 array running (`mddev->pers` attached).
2. Reshape requested via sysfs (e.g., `echo 4 > raid_disks`). `update_raid_disks()` sets `mddev->delta_disks = raid_disks - mddev->raid_disks` and invokes `pers->check_reshape()`.
3. Reshape never actually starts (`mddev->reshape_position` remains `MaxSector`).
4. Array is stopped/deactivated to inactive state (`echo inactive > array_state`), calling `do_md_stop(mddev, 2)`.
5. `do_md_stop(mddev, 2)` calls `__md_stop_writes(mddev)` and `__md_stop(mddev)`.
6. `__md_stop(mddev)` detaches personality (`mddev->pers = NULL`), destroys bitmap, frees `mddev->private`, clears `MD_RECOVERY_FROZEN`. Crucially, it does *not* touch `mddev->delta_disks`, `new_level`, `new_layout`, or `new_chunk_sectors`. (Unlike `mode == 0`, which calls `md_clean(mddev)` resetting all fields).
7. Array is restarted (`echo active > array_state`). `md_run()` invokes `raid5_run()`. Because `mddev->reshape_position == MaxSector`, `raid5_run()` enters the non-reshape branch and trips `BUG_ON(mddev->delta_disks != 0)` (or the other three `BUG_ON`s if layout/chunk/level had been queued).
- **Investigation of Superblock Handling & On-Disk Invariants**:
- Inspected `super_1_sync()` (lines 2264-2281) and `super_90_sync()` (lines 1649-1658):
Reshape parameters (`MD_FEATURE_RESHAPE_ACTIVE`, `new_layout`, `delta_disks`, `new_level`, `new_chunk`) are *only* written to disk when `mddev->reshape_position != MaxSector`.
- Inspected `super_1_validate()` (lines 2054-2071) and `super_90_validate()` (lines 1511-1525):
When `MD_FEATURE_RESHAPE_ACTIVE` is not set on disk, both validate routines reset:
```c
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
- Inspected `reshape_position_store()` (lines 5738-5742):
Applies the exact same reset:
```c
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
- **Investigation of Stop Paths**:
- `__md_stop()` is called in two paths:
1. `md_stop()` (`dm-raid.c`). Caller holds `reconfig_mutex`.
2. `do_md_stop()` (`md.c`). Caller holds `reconfig_mutex`.
- In mode 0 (`STOP_ARRAY`, `array_state = clear`), `md_clean()` is invoked which resets all parameters.
- In mode 2 (`array_state = inactive`), `md_clean()` is NOT invoked; only `__md_stop()` runs. Any in-memory pending reshape parameters (when `reshape_position == MaxSector`) leak into the stopped array state.
- **Investigation of Reshape Resumption**:
- If `mddev->reshape_position != MaxSector` when `__md_stop()` is called, a reshape was actively in progress.
- The superblock recorded the reshape state in `__md_stop_writes()`.
- `__md_stop()` must *not* clear `delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors`, or `reshape_backwards` when `reshape_position != MaxSector`, because `raid5_run` / `raid10_run` requires them to continue the ongoing reshape upon array restart.
- **Investigation of Sysfs Stores While Array is Inactive (`pers == NULL`)**:
- `raid_disks_store`: if `pers == NULL` and `reshape_position == MaxSector`, it sets `mddev->raid_disks = n;` and does *not* set `delta_disks`.
- `layout_store`: if `pers == NULL` and `reshape_position == MaxSector`, it sets `mddev->new_layout = n; mddev->layout = n;` so they stay synchronized.
- `chunk_size_store`: if `pers == NULL` and `reshape_position == MaxSector`, it sets `mddev->new_chunk_sectors = n >> 9; mddev->chunk_sectors = n >> 9;` so they stay synchronized.
- `new_level_store`: stores `mddev->new_level = n; md_update_sb(mddev, 1);`.
### 2. Hypotheses and Proposed Solution
- **Root Cause Confirmed**:
Pending reshape parameters set during active array operations are purely ephemeral in-memory state if the reshape has not actually commenced (`mddev->reshape_position == MaxSector`). When the array personality is stopped in `__md_stop()`, these uncommitted parameters are orphaned. Upon restart, `raid5_run()` detects stale reshape parameters while `reshape_position == MaxSector` and hits `BUG_ON()`.
- **Fix Location**:
In `drivers/md/md.c:__md_stop()`:
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
}
```
- Ensures clean state transitions when stopping an array with an aborted/unstarted reshape.
- Safe regarding locking: all callers hold `reconfig_mutex`.
- Preserves in-progress reshapes (`reshape_position != MaxSector`).
- Matches the idiom used across `super_1_validate`, `super_90_validate`, and `reshape_position_store`.
### 3. Critical Code and References
- `drivers/md/md.c`:
- `__md_stop` (lines 7084-7098): Target function for patch.
- `do_md_stop` (lines 7162-7231): Calls `__md_stop_writes(mddev)` and `__md_stop(mddev)`.
- `md_clean` (lines 6967-7015): Resets all fields on total disassembly (`mode == 0`).
- `super_1_validate` (lines 2066-2070): Canonical idiom for resetting inactive reshape parameters.
- `super_90_validate` (lines 1520-1524): Canonical idiom for resetting inactive reshape parameters.
- `reshape_position_store` (lines 5738-5743): Identical reset logic.
- `drivers/md/raid5.c`:
- `raid5_run` (lines 8113-8118):
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
### 4. Watchouts & Loop Prevention
- Do not attempt to modify `raid5_run()` or other personality files (`raid10.c`, `raid1.c`): the bug is in the MD core stopping lifecycle (`md.c`).
- Do not reset reshape parameters unconditionally: always guard with `if (mddev->reshape_position == MaxSector)`.
Tokens:
input: 53311
output: 2312
thoughts: 0
|
| 224/4 |
2026/09/09 20:41 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 31137
output: 38
thoughts: 16
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing Git History with SymbolName and SourcePath**
Right, time to dig into this. My first instinct when dealing with this kind of problem is to reach for `git log`. But I'm not just going to run a vanilla `git log` here. I need to be precise. I'm thinking, "SymbolName and SourcePath" - that indicates I'm probably trying to track changes related to a specific function, class, or file location within the codebase. I need to figure out the right combination of arguments and flags to achieve that. Let's see how deep this rabbit hole goes. I need to figure out if there is some code, or a script, that will handle this and avoid the pain of parsing the output manually. Maybe I can script it? Right, let's start with `git log` and see what comes back.
|
| 225/4 |
2026/09/09 20:42 |
tool |
git-log |
0m
Args: map[Count:5 SourcePath:drivers/md/md.c SymbolName:new_level_store]
Results: map[Output:d981ed841930 md: Add new_level sysfs interface
]
|
| 226/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 31422
output: 26
thoughts: 24
Thoughts: Okay, here's my interpretation of that request, formatted for a domain expert like myself:
**Analyzing a Specific Git Commit**
Right, let's dive into commit `d981ed841930`. My initial thought is to grab the full context, so I'm reaching for `git show`. That's going to give me the meat β the commit message, the author, the date, and most importantly, the actual diffs. I need to see what changed, line by line. I'm looking for the *what*, the *why*, and the *how* of the change.
I'll be specifically focusing on the granularity of the changes; were they isolated, surgical edits, or larger refactorings? What files were touched? Are there any obvious potential regressions or impacts on the existing codebase I should be concerned about?
Ideally, the commit message should provide sufficient context. I'll expect to see a concise description of the bug fix, feature implementation, or refactoring objective. If it's a critical bug fix, I'm expecting detailed steps to reproduce, relevant scenarios to have been accounted for, and any workarounds considered before the final solution. In cases of feature implementation, a brief overview of the added functionalities and potential integrations are key.
If the message is vague, I'm likely to start digging further to understand the rationale behind the changes and assess its potential ripple effects. I might then need to correlate this commit with related commits to get a comprehensive understanding, checking related issues and pull requests, to see if there is any discussion or rationale that is not immediately apparent from the commit itself. Essentially, I'm going to look at the 'breadcrumbs' to ensure I have a complete understanding of the change's impact and intended purpose.
|
| 227/4 |
2026/09/09 20:42 |
tool |
git-show |
0m
Args:
Results: map[Output:commit d981ed8419303ed12351eea8541ad6cb76455fe3
Author: Xiao Ni <xni@redhat.com>
Date: Thu Sep 5 07:54:53 2024 +0800
md: Add new_level sysfs interface
Now reshape supports two ways: with backup file or without backup file.
For the situation without backup file, it needs to change data offset.
It doesn't need systemd service mdadm-grow-continue. So it can finish
the reshape job in one process environment. It can know the new level
from mdadm --grow command and can change to new level after reshape
finishes.
For the situation with backup file, it needs systemd service
mdadm-grow-continue to monitor reshape progress. So there are two process
envolved. One is mdadm --grow command whick kicks off reshape and wakes
up mdadm-grow-continue service. The second process is the service, which
doesn't know the new level from the first process.
In kernel space mddev->new_level is used to record the new level when
doing reshape. This patch adds a new interface to help mdadm update
new_level and sync it to metadata. Then mdadm-grow-continue can read the
right new_level.
Commit log revised by Song Liu. Please refer to the link for more details.
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20240904235453.99120-1-xni@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b669971d4782..179ee4afe937 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4052,6 +4052,34 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
static struct md_sysfs_entry md_level =
__ATTR(level, S_IRUGO|S_IWUSR, level_show, level_store);
+static ssize_t
+new_level_show(struct mddev *mddev, char *page)
+{
+ return sprintf(page, "%d\n", mddev->new_level);
+}
+
+static ssize_t
+new_level_store(struct mddev *mddev, const char *buf, size_t len)
+{
+ unsigned int n;
+ int err;
+
+ err = kstrtouint(buf, 10, &n);
+ if (err < 0)
+ return err;
+ err = mddev_lock(mddev);
+ if (err)
+ return err;
+
+ mddev->new_level = n;
+ md_update_sb(mddev, 1);
+
+ mddev_unlock(mddev);
+ return len;
+}
+static struct md_sysfs_entry md_new_level =
+__ATTR(new_level, 0664, new_level_show, new_level_store);
+
static ssize_t
layout_show(struct mddev *mddev, char *page)
{
@@ -5583,6 +5611,7 @@ __ATTR(serialize_policy, S_IRUGO | S_IWUSR, serialize_policy_show,
static struct attribute *md_default_attrs[] = {
&md_level.attr,
+ &md_new_level.attr,
&md_layout.attr,
&md_raid_disks.attr,
&md_uuid.attr,
]
|
| 228/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 32833
output: 36
thoughts: 1105
Thoughts: **Analyzing the MD Core's Reshape Parameter Handling**
Okay, so `new_level` was added back on September 5th, 2024. I need to pay attention to where it's set, specifically, that `mddev->new_level = n;` assignment. I'm wondering if `new_level` could potentially be written when the persistent data structure (`pers`) is null or during a non-active reshape operation. Looking at `super_1_sync`, I see that `new_level` is only written to the superblock (`sb`) if `mddev->reshape_position` isn't `MaxSector`. Crucially, if reshape isn't active, `new_level` *isn't* synced.
The question now is, what happens when `mddev->pers` is running or not? And should `raid5_run()` have a `BUG_ON` or should it be handling this differently? I need to stay focused on the user prompt's instruction: find similar coding mistakes and apply a fix to similar locations *within the same file*.
The proposed fix in `md.c` seems to address this: when `reshape_position` is `MaxSector`, it resets `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`. This makes sense, as those parameters are only relevant during a reshape.
I need to confirm if this proposed fix is good, and it may be that `raid5.c` *shouldn't* be touched. Let me check the instructions again: "Check if your fix should be extended/applied to similar cases around to fix other similar bugs. But don't go too wide, don't try to fix problems kernel-wide, fix similar issues in the same file only." The key phrase is "in the same file only", and in previous execution history "Do not attempt to modify raid5_run() or other personality files (raid10.c, raid1.c): the bug is in the MD core stopping lifecycle (md.c)".
Therefore, based on the specific instructions to *not* modify `raid5_run` and the constraint of staying within `md.c`, I will focus on understanding `__md_stop()` and look for other places in `md.c` where reshape-related parameters could become inconsistent and where similar cleanup logic may be warranted. I'll carefully read the code in `md.c` from lines 7080 to 7110.
|
| 229/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7080 LineCount:35]
Results: map[Contents:7080: if (!mddev_is_dm(mddev))
7081: blk_sync_queue(mddev->gendisk->queue);
7082: }
7083:
7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
7110:
7111: EXPORT_SYMBOL_GPL(md_stop);
7112:
7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
]
|
| 230/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 35038
output: 36
thoughts: 20
Thoughts: Okay, here's my take on those thoughts, framed as my own reasoning:
**Checking `do_md_stop` After `md_set_readonly`**
Alright, so I'm thinking, "Let's make sure we check `do_md_stop` *immediately* after that `md_set_readonly` call." It's a key sequence to verify, because the timing of those two interactions is critical. I'm assuming there's a reason, perhaps related to ensuring we're handling a specific state change or preventing some undesired operation that could happen if we didn't check right away. It's that kind of fine-grained control over the system behavior that I always try to nail down, especially when working on the critical sections of the code. Gotta be proactive about edge cases and potential race conditions. So, yeah, *that* order, *those* two functions, need to be close together in the logic to verify its intended behavior.
|
| 231/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7155 LineCount:80]
Results: map[Contents:7155: return err;
7156: }
7157:
7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
7232:
7233: #ifndef MODULE
7234: static void autorun_array(struct mddev *mddev)
]
|
| 232/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 36506
output: 37
thoughts: 94
Thoughts: Here's my thought process, as it stands:
**Analyzing the `do_md_stop()` Function in the Context of Superblock Synchronization**
Okay, diving into `do_md_stop()`. The crucial bit here is when `mddev->pers` isn't NULL. That's where things get interesting. I see a call to `__md_stop_writes(mddev)` immediately followed by `__md_stop(mddev)`. The immediate question that pops into my head is whether `__md_stop_writes()` handles syncing the superblock. That would be the logical place for it, given its name. Itβs certainly responsible for stopping writes, which would include any ongoing superblock updates, but I need to confirm whether it also *persists* those pending updates. Given the sensitivity of the superblock and the write-stopping actions of the function, I strongly suspect superblock synchronization is done, or at least started, in that function. My intuition tells me that the synchronization is done, or at least triggered, within `__md_stop_writes()`. However, I need to check the source to be certain; let's dig into `__md_stop_writes()`!
|
| 233/4 |
2026/09/09 20:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop_writes]
Results: map[SourceCode:7032: static void __md_stop_writes(struct mddev *mddev)
7033: {
7034: timer_delete_sync(&mddev->safemode_timer);
7035:
7036: if (md_is_rdwr(mddev) || !mddev_is_dm(mddev)) {
7037: if (mddev->pers && mddev->pers->quiesce) {
7038: mddev->pers->quiesce(mddev, 1);
7039: mddev->pers->quiesce(mddev, 0);
7040: }
7041:
7042: if (md_bitmap_enabled(mddev, true))
7043: mddev->bitmap_ops->flush(mddev);
7044: }
7045:
7046: if (md_is_rdwr(mddev) &&
7047: ((!mddev->in_sync && !mddev_is_clustered(mddev)) ||
7048: mddev->sb_flags)) {
7049: /* mark array as shutdown cleanly */
7050: if (!mddev_is_clustered(mddev))
7051: mddev->in_sync = 1;
7052: md_update_sb(mddev, 1);
7053: }
7054: /* disable policy to guarantee rdevs free resources for serialization */
7055: clear_bit(MD_SERIALIZE_POLICY, &mddev->flags);
7056: mddev_destroy_serial_pool(mddev, NULL);
7057: }
SourceFile:drivers/md/md.c]
|
| 234/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 37365
output: 34
thoughts: 198
Thoughts: **My Analysis of the RAID Metadata Update Process**
Okay, so I'm diving into this `__md_stop_writes()` function, and it looks like it's crucial for properly managing writes to the RAID array. First, it calls `md_update_sb(mddev, 1)`, which is where the magic happens. Inside that function, we get to either `super_1_sync()` or `super_90_sync()`, depending on the MD superblock format, I assume.
Now, a key point to note here is within `super_1_sync()`: the `sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE)` update. This feature flag for active reshaping is only *set* if `mddev->reshape_position` isn't equal to `MaxSector`. If it *is* equal to `MaxSector`, meaning reshape operations are *complete*, then `MD_FEATURE_RESHAPE_ACTIVE` is explicitly *not* set in the superblock. This makes total sense; we wouldn't want to leave that flag active when it's not actually happening. It's a key conditional check that ensures the RAID array's state is properly reflected.
Finally, after `__md_stop_writes(mddev)` runs, it's followed by `__md_stop(mddev)`.
I should probably take a look at `md_clean(mddev)` in `drivers/md/md.c` to see how it resets fields after this whole process, to get a complete picture of how the data structures are cleaned up after a reshape operation. It's important to understand how state variables are reset after the function's execution.
|
| 235/4 |
2026/09/09 20:42 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 236/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 39165
output: 36
thoughts: 127
Thoughts: **My Initial Assessment of the Metadata Handling**
Okay, let's dive in. I'm focusing on how the metadata is handled, particularly in the context of reshaping an array. First, I'm examining the `md_clean` function. Specifically, I see `mddev->reshape_position` is initialized to `MaxSector`, suggesting we're starting reshaping from the end of the array, or at least positioning ourselves there. The following lines, setting `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` to zero, strongly suggest a clean slate for the reshaping operation. This indicates either a fresh reshape or a reset of the parameters before starting.
Now, I'm going to shift my focus to `super_1_validate`. I suspect that this function is where we'll find the logic for validating the superblock data during reshape operations. I'll need to scrutinize lines 2050 through 2075 in that function to get a good understanding. This is where the crucial checks, or lack of checks, will determine the robustness of the metadata against potential errors in reshape.
|
| 237/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:2050 LineCount:30]
Results: map[Contents:2050: mddev->bitmap_info.space =
2051: -mddev->bitmap_info.offset;
2052: }
2053:
2054: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2057: mddev->new_level = le32_to_cpu(sb->new_level);
2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
2063: & MD_FEATURE_RESHAPE_BACKWARDS)))
2064: mddev->reshape_backwards = 1;
2065: } else {
2066: mddev->reshape_position = MaxSector;
2067: mddev->delta_disks = 0;
2068: mddev->new_level = mddev->level;
2069: mddev->new_layout = mddev->layout;
2070: mddev->new_chunk_sectors = mddev->chunk_sectors;
2071: }
2072:
2073: if (mddev->level == 0 &&
2074: !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT))
2075: mddev->layout = -1;
2076:
2077: if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL)
2078: set_bit(MD_HAS_JOURNAL, &mddev->flags);
2079:
]
|
| 238/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 40173
output: 36
thoughts: 130
Thoughts: Here's my analysis of the provided code snippets, thinking through the implications as I read them:
**Analyzing `super_1_validate` and `super_90_validate`**
Okay, let's dive into these sections from the `super_1_validate` and `super_90_validate` functions. I see we're looking at code related to the metadata of the RAID arrays. Specifically, I'm drawn to lines 2066-2070 within `super_1_validate`. This looks like the "else" condition, meaning if some validation check *didn't* pass. This block seems to be setting up the parameters for a reshape or level migration to fail gracefully. Let's see... it sets `mddev->reshape_position` to `MaxSector`. That's a good indicator, likely used to signal either a halt or complete a migration. `mddev->delta_disks = 0` is another key one; suggesting no change in the number of disks. `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors` are also reset to their current values. This whole block signals to me that if the migration validation fails, we're essentially reverting to the original configuration, preventing unexpected behavior or data loss.
Now, let's switch gears and investigate what's happening with the `super_90_validate` section around lines 1515-1530. It will provide a bit more detail. I'll need to look at both of these snippets in tandem to see how these two validation functions relate and where errors are being handled. I can see the structure of the data and hopefully the reason behind the checks. This is the place to start getting a better understanding of how the code is validating the superblocks.
|
| 239/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:1515 LineCount:20]
Results: map[Contents:1515: mddev->new_layout = sb->new_layout;
1516: mddev->new_chunk_sectors = sb->new_chunk >> 9;
1517: if (mddev->delta_disks < 0)
1518: mddev->reshape_backwards = 1;
1519: } else {
1520: mddev->reshape_position = MaxSector;
1521: mddev->delta_disks = 0;
1522: mddev->new_level = mddev->level;
1523: mddev->new_layout = mddev->layout;
1524: mddev->new_chunk_sectors = mddev->chunk_sectors;
1525: }
1526: if (mddev->level == 0)
1527: mddev->layout = -1;
1528:
1529: if (sb->state & (1<<MD_SB_CLEAN))
1530: mddev->resync_offset = MaxSector;
1531: else {
1532: if (sb->events_hi == sb->cp_events_hi &&
1533: sb->events_lo == sb->cp_events_lo) {
1534: mddev->resync_offset = sb->recovery_cp;
]
|
| 240/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 41098
output: 36
thoughts: 46
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Observations on Code Redundancy and Potential Optimization**
Alright, I'm looking at this code, and the first thing that jumps out at me is the *exact* duplication between the validation routines `super_1_validate` and `super_90_validate`. I mean, they are *bit-for-bit* identical. This immediately flags a potential area for refactoring. We need to consolidate this logic. My gut says we can extract a common function or class and parameterize it to handle the subtle differences, if any, that we may find upon deeper inspection. This kind of redundancy is a maintenance nightmare, and it's a drag on readability and testability.
Then, my eye drifted down to `reshape_position_store`, specifically lines 5735 to 5745. Based on the naming, and given what I know about the overall architecture, I'm guessing this section is dealing with some sort of data restructuring related to the position store. We might need to look at this area for performance. Is this a bottleneck, and is it possible to make it more efficient?
|
| 241/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:5735 LineCount:15]
Results: map[Contents:5735: err = -EBUSY;
5736: if (mddev->pers)
5737: goto unlock;
5738: mddev->reshape_position = new;
5739: mddev->delta_disks = 0;
5740: mddev->reshape_backwards = 0;
5741: mddev->new_level = mddev->level;
5742: mddev->new_layout = mddev->layout;
5743: mddev->new_chunk_sectors = mddev->chunk_sectors;
5744: rdev_for_each(rdev, mddev)
5745: rdev->new_data_offset = rdev->data_offset;
5746: err = 0;
5747: unlock:
5748: mddev_unlock(mddev);
5749: return err ?: len;
]
|
| 242/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 41691
output: 28
thoughts: 416
Thoughts: **Analyzing the Reshape Process and Data Offset**
Okay, so I'm looking at how the reshape process works, specifically focusing on the state after a reshape operation. The `reshape_position_store` function, and now, the `__md_stop()` function both set the same crucial fields: `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` to their current values from `mddev`. Essentially, the system is resetting its internal reshape state variables *after* a reshape has completed or been aborted. This is my key understanding here. I can see this code is doing some cleanup.
However, a question pops into my mind: What happens to `rdev->new_data_offset` in all of this? This is critical during a reshape, especially when disks are added/removed or when the underlying layout is modified. I need to understand if `rdev->new_data_offset` gets modified (or if it should have, and maybe doesn't). Where *exactly* is it used, set and modified? I'll need to trace its usage in the `md.c` code to see how it affects the reshape. I'm going to look to see if this `new_data_offset` is ever set or updated and what consequences this has.
|
| 243/4 |
2026/09/09 20:42 |
tool |
grepper |
0m
Args: map[Expression:new_data_offset PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=826=static int parse_dev_params(struct raid_set *rs, struct dm_arg_set *as)
--
drivers/md/dm-raid.c-849- rs->dev[i].rdev.data_offset = 0;
drivers/md/dm-raid.c:850: rs->dev[i].rdev.new_data_offset = 0;
drivers/md/dm-raid.c-851- rs->dev[i].rdev.mddev = &rs->md;
--
drivers/md/dm-raid.c=1626=static sector_t _get_reshape_sectors(struct raid_set *rs)
--
drivers/md/dm-raid.c-1632- if (!test_bit(Journal, &rdev->flags)) {
drivers/md/dm-raid.c:1633: reshape_sectors = (rdev->data_offset > rdev->new_data_offset) ?
drivers/md/dm-raid.c:1634: rdev->data_offset - rdev->new_data_offset :
drivers/md/dm-raid.c:1635: rdev->new_data_offset - rdev->data_offset;
drivers/md/dm-raid.c-1636- break;
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2014- __le64 data_offset;
drivers/md/dm-raid.c:2015: __le64 new_data_offset;
drivers/md/dm-raid.c-2016-
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2177- sb->data_offset = cpu_to_le64(rdev->data_offset);
drivers/md/dm-raid.c:2178: sb->new_data_offset = cpu_to_le64(rdev->new_data_offset);
drivers/md/dm-raid.c-2179- sb->sectors = cpu_to_le64(rdev->sectors);
--
drivers/md/dm-raid.c=2459=static int super_validate(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2521- rdev->data_offset = le64_to_cpu(sb->data_offset);
drivers/md/dm-raid.c:2522: rdev->new_data_offset = le64_to_cpu(sb->new_data_offset);
drivers/md/dm-raid.c-2523-
--
drivers/md/dm-raid.c=2530=static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
--
drivers/md/dm-raid.c-2622-/*
drivers/md/dm-raid.c:2623: * Adjust data_offset and new_data_offset on all disk members of @rs
drivers/md/dm-raid.c-2624- * for out of place reshaping if requested by constructor
--
drivers/md/dm-raid.c=2630=static int rs_adjust_data_offsets(struct raid_set *rs)
drivers/md/dm-raid.c-2631-{
drivers/md/dm-raid.c:2632: sector_t data_offset = 0, new_data_offset = 0;
drivers/md/dm-raid.c-2633- struct md_rdev *rdev;
--
drivers/md/dm-raid.c-2655- data_offset = 0;
drivers/md/dm-raid.c:2656: new_data_offset = rs->data_offset;
drivers/md/dm-raid.c-2657-
--
drivers/md/dm-raid.c-2667- data_offset = rs->data_offset;
drivers/md/dm-raid.c:2668: new_data_offset = 0;
drivers/md/dm-raid.c-2669-
--
drivers/md/dm-raid.c-2689- data_offset = rs->data_offset ? rdev->data_offset : 0;
drivers/md/dm-raid.c:2690: new_data_offset = data_offset ? 0 : rs->data_offset;
drivers/md/dm-raid.c-2691- set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags);
--
drivers/md/dm-raid.c-2714- rdev->data_offset = data_offset;
drivers/md/dm-raid.c:2715: rdev->new_data_offset = new_data_offset;
drivers/md/dm-raid.c-2716- }
--
drivers/md/dm-raid.c=2739=static int rs_setup_takeover(struct raid_set *rs)
--
drivers/md/dm-raid.c-2743- unsigned int d = mddev->raid_disks = rs->raid_disks;
drivers/md/dm-raid.c:2744: sector_t new_data_offset = rs->dev[0].rdev.data_offset ? 0 : rs->data_offset;
drivers/md/dm-raid.c-2745-
--
drivers/md/dm-raid.c-2776-
drivers/md/dm-raid.c:2777: rdev->new_data_offset = new_data_offset;
drivers/md/dm-raid.c-2778- }
--
drivers/md/dm-raid.c=2849=static int rs_setup_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2881- *
drivers/md/dm-raid.c:2882: * - data_offset and new_data_offset are
drivers/md/dm-raid.c-2883- * adjusted for aforementioned out of place
--
drivers/md/md.c=1176=int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
--
drivers/md/md.c-1191- (sector >= rdev->mddev->reshape_position)))
drivers/md/md.c:1192: bio.bi_iter.bi_sector = sector + rdev->new_data_offset;
drivers/md/md.c-1193- else
--
drivers/md/md.c=1360=static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_version)
--
drivers/md/md.c-1405- rdev->data_offset = 0;
drivers/md/md.c:1406: rdev->new_data_offset = 0;
drivers/md/md.c-1407- rdev->sb_size = MD_SB_BYTES;
--
drivers/md/md.c=1803=static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_version)
--
drivers/md/md.c-1872- rdev->data_offset = le64_to_cpu(sb->data_offset);
drivers/md/md.c:1873: rdev->new_data_offset = rdev->data_offset;
drivers/md/md.c-1874- if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE) &&
drivers/md/md.c-1875- (le32_to_cpu(sb->feature_map) & MD_FEATURE_NEW_OFFSET))
drivers/md/md.c:1876: rdev->new_data_offset += (s32)le32_to_cpu(sb->new_offset);
drivers/md/md.c-1877- atomic_set(&rdev->corrected_errors, le32_to_cpu(sb->cnt_corrected_read));
--
drivers/md/md.c-1887- if (minor_version
drivers/md/md.c:1888: && rdev->new_data_offset < sb_start + (rdev->sb_size/512))
drivers/md/md.c-1889- return -EINVAL;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2274- |= cpu_to_le32(MD_FEATURE_RESHAPE_BACKWARDS);
drivers/md/md.c:2275: if (rdev->new_data_offset != rdev->data_offset) {
drivers/md/md.c-2276- sb->feature_map
drivers/md/md.c-2277- |= cpu_to_le32(MD_FEATURE_NEW_OFFSET);
drivers/md/md.c:2278: sb->new_offset = cpu_to_le32((__u32)(rdev->new_data_offset
drivers/md/md.c-2279- - rdev->data_offset));
--
drivers/md/md.c=2387=super_1_rdev_size_change(struct md_rdev *rdev, sector_t num_sectors)
--
drivers/md/md.c-2392- return 0; /* component must fit device */
drivers/md/md.c:2393: if (rdev->data_offset != rdev->new_data_offset)
drivers/md/md.c-2394- return 0; /* too confusing */
--
drivers/md/md.c=3380=offset_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3391- rdev->data_offset = offset;
drivers/md/md.c:3392: rdev->new_data_offset = offset;
drivers/md/md.c-3393- return len;
--
drivers/md/md.c=3399=static ssize_t new_offset_show(struct md_rdev *rdev, char *page)
--
drivers/md/md.c-3401- return sprintf(page, "%llu\n",
drivers/md/md.c:3402: (unsigned long long)rdev->new_data_offset);
drivers/md/md.c-3403-}
--
drivers/md/md.c=3405=static ssize_t new_offset_store(struct md_rdev *rdev,
--
drivers/md/md.c-3444- return -E2BIG;
drivers/md/md.c:3445: rdev->new_data_offset = new_offset;
drivers/md/md.c-3446- if (new_offset > rdev->data_offset)
--
drivers/md/md.c=3513=rdev_size_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3522- return -EINVAL;
drivers/md/md.c:3523: if (rdev->data_offset != rdev->new_data_offset)
drivers/md/md.c-3524- return -EINVAL; /* too confusing */
--
drivers/md/md.c=3793=int md_rdev_init(struct md_rdev *rdev)
--
drivers/md/md.c-3799- rdev->data_offset = 0;
drivers/md/md.c:3800: rdev->new_data_offset = 0;
drivers/md/md.c-3801- rdev->sb_events = 0;
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4440- if (olddisks < n &&
drivers/md/md.c:4441: rdev->data_offset < rdev->new_data_offset)
drivers/md/md.c-4442- goto out_unlock;
drivers/md/md.c-4443- if (olddisks > n &&
drivers/md/md.c:4444: rdev->data_offset > rdev->new_data_offset)
drivers/md/md.c-4445- goto out_unlock;
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5744- rdev_for_each(rdev, mddev)
drivers/md/md.c:5745: rdev->new_data_offset = rdev->data_offset;
drivers/md/md.c-5746- err = 0;
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8052- if (mddev->raid_disks < raid_disks &&
drivers/md/md.c:8053: rdev->data_offset < rdev->new_data_offset)
drivers/md/md.c-8054- return -EINVAL;
drivers/md/md.c-8055- if (mddev->raid_disks > raid_disks &&
drivers/md/md.c:8056: rdev->data_offset > rdev->new_data_offset)
drivers/md/md.c-8057- return -EINVAL;
--
drivers/md/md.c=10640=void md_finish_reshape(struct mddev *mddev)
--
drivers/md/md.c-10645- rdev_for_each(rdev, mddev) {
drivers/md/md.c:10646: if (rdev->data_offset > rdev->new_data_offset)
drivers/md/md.c:10647: rdev->sectors += rdev->data_offset - rdev->new_data_offset;
drivers/md/md.c-10648- else
drivers/md/md.c:10649: rdev->sectors -= rdev->new_data_offset - rdev->data_offset;
drivers/md/md.c:10650: rdev->data_offset = rdev->new_data_offset;
drivers/md/md.c-10651- }
--
drivers/md/md.c=10658=bool rdev_set_badblocks(struct md_rdev *rdev, sector_t s, sector_t sectors,
--
drivers/md/md.c-10673- if (is_new)
drivers/md/md.c:10674: s += rdev->new_data_offset;
drivers/md/md.c-10675- else
--
drivers/md/md.c=10698=void rdev_clear_badblocks(struct md_rdev *rdev, sector_t s, sector_t sectors,
--
drivers/md/md.c-10701- if (is_new)
drivers/md/md.c:10702: s += rdev->new_data_offset;
drivers/md/md.c-10703- else
--
drivers/md/md.h=134=struct md_rdev {
--
drivers/md/md.h-153- sector_t data_offset; /* start of data in array */
drivers/md/md.h:154: sector_t new_data_offset;/* only relevant while reshaping */
drivers/md/md.h-155- sector_t sb_start; /* offset of the super block (in 512byte sectors) */
--
drivers/md/raid10.c=1078=static sector_t choose_data_offset(struct r10bio *r10_bio,
--
drivers/md/raid10.c-1084- else
drivers/md/raid10.c:1085: return rdev->new_data_offset;
drivers/md/raid10.c-1086-}
--
drivers/md/raid10.c=3943=static int raid10_run(struct mddev *mddev)
--
drivers/md/raid10.c-3998- }
drivers/md/raid10.c:3999: diff = (rdev->new_data_offset - rdev->data_offset);
drivers/md/raid10.c-4000- if (!mddev->reshape_backwards)
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4388- if (rdev->raid_disk >= 0) {
drivers/md/raid10.c:4389: long long diff = (rdev->new_data_offset
drivers/md/raid10.c-4390- - rdev->data_offset);
--
drivers/md/raid10.c-4532- rdev_for_each(rdev, mddev)
drivers/md/raid10.c:4533: rdev->new_data_offset = rdev->data_offset;
drivers/md/raid10.c-4534- smp_wmb();
--
drivers/md/raid10.c=4574=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-4804- b->bi_iter.bi_sector = r10_bio->devs[s/2].addr +
drivers/md/raid10.c:4805: rdev2->new_data_offset;
drivers/md/raid10.c-4806- b->bi_end_io = end_reshape_write;
--
drivers/md/raid5.c=917=static void stripe_add_to_batch_list(struct r5conf *conf,
--
drivers/md/raid5.c-1011-
drivers/md/raid5.c:1012:/* Determine if 'data_offset' or 'new_data_offset' should be used
drivers/md/raid5.c-1013- * in this stripe_head.
--
drivers/md/raid5.c=1015=static int use_new_offset(struct r5conf *conf, struct stripe_head *sh)
--
drivers/md/raid5.c-1027- /* We are in a reshape, and this is a new-generation stripe,
drivers/md/raid5.c:1028: * so use new_data_offset.
drivers/md/raid5.c-1029- */
--
drivers/md/raid5.c=1157=static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
--
drivers/md/raid5.c-1277- bi->bi_iter.bi_sector = (sh->sector
drivers/md/raid5.c:1278: + rdev->new_data_offset);
drivers/md/raid5.c-1279- else
--
drivers/md/raid5.c-1333- rbi->bi_iter.bi_sector = (sh->sector
drivers/md/raid5.c:1334: + rrdev->new_data_offset);
drivers/md/raid5.c-1335- else
--
drivers/md/raid5.c=2723=static void raid5_end_read_request(struct bio * bi)
--
drivers/md/raid5.c-2752- if (use_new_offset(conf, sh))
drivers/md/raid5.c:2753: s = sh->sector + rdev->new_data_offset;
drivers/md/raid5.c-2754- else
--
drivers/md/raid5.c=7934=static int raid5_set_limits(struct mddev *mddev)
--
drivers/md/raid5.c-7963- rdev_for_each(rdev, mddev)
drivers/md/raid5.c:7964: queue_limits_stack_bdev(&lim, rdev->bdev, rdev->new_data_offset,
drivers/md/raid5.c-7965- mddev->gendisk->disk_name);
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8013- continue;
drivers/md/raid5.c:8014: diff = (rdev->new_data_offset - rdev->data_offset);
drivers/md/raid5.c-8015- if (first) {
--
drivers/md/raid5.h=570=struct r5conf {
--
drivers/md/raid5.h-605- * data_offset and
drivers/md/raid5.h:606: * new_data_offset across all
drivers/md/raid5.h-607- * devices. May be negative,
]
|
| 244/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 48103
output: 37
thoughts: 67
Thoughts: Here's my take on those lines of code, presented as if I were thinking it through:
**Analyzing the RAID5 Run Function**
Okay, hold on a second! I need to zero in on something. Specifically, I'm looking at `raid5_run`, lines 8013 through 8015. Let's see... what's this calculating? Ah, it looks like:
```c
diff = (rdev->new_data_offset - rdev->data_offset);
```
Right, `diff` is assigned the difference between `new_data_offset` and `data_offset` from the `rdev` struct. I immediately want to understand the context, so I'm jumping up the function a few lines to get a better handle on the surrounding logic. I need to understand *why* this offset difference is important. What's it calculating the delta for? Is this related to a data migration, reconstruction, or something else entirely? Time to dig into the surrounding code... This will be key to understanding the data movement and any potential implications for performance or data integrity within the RAID5 setup.
|
| 245/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8000 LineCount:40]
Results: map[Contents:8000:
8001: if (mddev->resync_offset != MaxSector)
8002: pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
8003: mdname(mddev));
8004:
8005: rdev_for_each(rdev, mddev) {
8006: long long diff;
8007:
8008: if (test_bit(Journal, &rdev->flags)) {
8009: journal_dev = rdev;
8010: continue;
8011: }
8012: if (rdev->raid_disk < 0)
8013: continue;
8014: diff = (rdev->new_data_offset - rdev->data_offset);
8015: if (first) {
8016: min_offset_diff = diff;
8017: first = 0;
8018: } else if (mddev->reshape_backwards &&
8019: diff < min_offset_diff)
8020: min_offset_diff = diff;
8021: else if (!mddev->reshape_backwards &&
8022: diff > min_offset_diff)
8023: min_offset_diff = diff;
8024: }
8025:
8026: if ((test_bit(MD_HAS_JOURNAL, &mddev->flags) || journal_dev) &&
8027: (mddev->bitmap_info.offset || mddev->bitmap_info.file)) {
8028: pr_notice("md/raid:%s: array cannot have both journal and bitmap\n",
8029: mdname(mddev));
8030: return -EINVAL;
8031: }
8032:
8033: if (mddev->reshape_position != MaxSector) {
8034: /* Check that we can continue the reshape.
8035: * Difficulties arise if the stripe we would write to
8036: * next is at or after the stripe we would read from next.
8037: * For a reshape that changes the number of devices, this
8038: * is only possible for a very short time, and mdadm makes
8039: * sure that time appears to have past before assembling
]
|
| 246/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 49096
output: 37
thoughts: 49
Thoughts: Here's my analysis of the provided code snippet, focusing on the thoughts as if they were my own:
**Diving into the `raid5_run` Function**
Okay, let's zero in on `raid5_run`. I'm going to take a closer look at a specific section, lines 8100 through 8125 within the `drivers/md/raid5.c` file. I'm going to mentally parse those lines, figuring out what's happening. I expect this section deals with the core execution logic, probably related to scheduling I/O, error handling, or perhaps the actual data reconstruction process within a RAID5 setup. I'll be looking for clues about how it handles the fundamental mechanics of the RAID5 operation. I'm already anticipating that this portion might contain details around how data is written or read in the face of potential drive failures. Let's see if my mental model lines up with the code. I'm expecting this to either be relatively straightforward if it's high-level or, if complex, very performance-critical. Knowing how crucial RAID5 performance is, I'm expecting a tight loop with carefully optimized logic. This section will likely show me the heart of the RAID5 operation!
|
| 247/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8100 LineCount:30]
Results: map[Contents:8100: }
8101: } else if (mddev->reshape_backwards
8102: ? (here_new * chunk_sectors + min_offset_diff <=
8103: here_old * chunk_sectors)
8104: : (here_new * chunk_sectors >=
8105: here_old * chunk_sectors + (-min_offset_diff))) {
8106: /* Reading from the same stripe as writing to - bad */
8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
8108: mdname(mddev));
8109: return -EINVAL;
8110: }
8111: pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
8112: /* OK, we should be able to continue; */
8113: } else {
8114: BUG_ON(mddev->level != mddev->new_level);
8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
8120: if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
8121: test_bit(MD_HAS_PPL, &mddev->flags)) {
8122: pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
8123: mdname(mddev));
8124: clear_bit(MD_HAS_PPL, &mddev->flags);
8125: clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
8126: }
8127:
8128: if (mddev->private == NULL)
8129: conf = setup_conf(mddev);
]
|
| 248/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 50015
output: 38
thoughts: 149
Thoughts: **Analyzing RAID Level Consistency in the Linux Kernel**
Okay, so I'm diving into some kernel code related to RAID, specifically looking at how different RAID levels handle reshape operations. I'm focusing on consistency checks to see how things are validated. First, I'm checking out the `raid5_run` function. Specifically, lines 8113-8118, which is where the function is doing some important assertions. This is a crucial area because it's ensuring that the RAID metadata is consistent during a potential reshape or level change. The `BUG_ON` macros immediately catch my eye. I see that if the code ends up in the `else` block, it means `mddev`'s current level, layout, and chunk size must be exactly the same as the new values. Furthermore, `delta_disks` is also asserted to be zero. This suggests that the current state must *exactly* match the desired state before certain operations proceed. This level of checking is exactly what I would expect, because there would be a disaster if those parameters diverged and weren't caught early.
Next, I'm switching gears slightly and pulling up `raid10_run` from `drivers/md/raid10.c`. Now, I'm curious to see how `raid10` handles its reshape process and how the consistency checking compares. This gives me a good point of comparison. Let's see how `raid10` does things, since it handles things differently!
|
| 249/4 |
2026/09/09 20:42 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid10.c FirstLine:4010 LineCount:40]
Results: map[Contents:4010:
4011: if (!mddev_is_dm(conf->mddev)) {
4012: int err = raid10_set_queue_limits(mddev);
4013:
4014: if (err) {
4015: ret = err;
4016: goto out_free_conf;
4017: }
4018: }
4019:
4020: /* need to check that every block has at least one working mirror */
4021: if (!enough(conf, -1)) {
4022: pr_err("md/raid10:%s: not enough operational mirrors.\n",
4023: mdname(mddev));
4024: goto out_free_conf;
4025: }
4026:
4027: if (conf->reshape_progress != MaxSector) {
4028: /* must ensure that shape change is supported */
4029: if (conf->geo.far_copies != 1 &&
4030: conf->geo.far_offset == 0)
4031: goto out_free_conf;
4032: if (conf->prev.far_copies != 1 &&
4033: conf->prev.far_offset == 0)
4034: goto out_free_conf;
4035: }
4036:
4037: mddev->degraded = 0;
4038: for (i = 0;
4039: i < conf->geo.raid_disks
4040: || i < conf->prev.raid_disks;
4041: i++) {
4042:
4043: disk = conf->mirrors + i;
4044:
4045: if (!disk->rdev && disk->replacement) {
4046: /* The replacement is all we have - use it */
4047: disk->rdev = disk->replacement;
4048: disk->replacement = NULL;
4049: clear_bit(Replacement, &disk->rdev->flags);
]
|
| 250/4 |
2026/09/09 20:42 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 51110
output: 36
thoughts: 1960
Thoughts: **Analysis of `__md_stop` and Reshape State Management**
Okay, let's break this down. My primary concern is the `__md_stop()` function and how it interacts with the reshape process, specifically concerning `rdev->new_data_offset`.
Initially, I'm examining `__md_stop()` and notice it resets `mddev`'s reshape-related variables (`delta_disks`, `reshape_backwards`, etc.) only when `mddev->reshape_position == MaxSector`. This seems logical at first, because it could indicate a reshape is complete.
However, I immediately question the omission of `rdev->new_data_offset` from this reset. Is that intentional? I pivot to `reshape_position_store()` which _does_ reset `rdev->new_data_offset` to `rdev->data_offset` for each `rdev`. Then I recall that `new_offset_store()` exists, and it's key because userspace (like `mdadm`) uses it to configure reshape BEFORE the array starts.
I realize that `new_offset_store()` allows setting `rdev->new_data_offset` only when `rdev->mddev->pers == NULL`. This aligns with `mdadm`'s pre-array setup. The standard flow must not overwrite a user-configured `new_data_offset` if they have set it before array creation.
So, the next question is: are there other places where `new_data_offset` might be modified unintentionally? I review `super_1_validate`, `super_90_validate`, and `md_clean`, none of which touch `new_data_offset`, suggesting that the observed pattern in `__md_stop()` is the canonical one.
The crucial case is when `reshape_position != MaxSector`, indicating a reshape was *in progress* before the array was stopped. In this scenario, `__md_stop()` *shouldn't* reset the reshape-related variables. This is because they're needed when `md_run` is called later, so that reshape can be continued.
Now, to add a bit of an edge case, I consider the implications of `new_level_store`, and whether it could allow writing `new_level` at an unexpected time: namely, when either `mddev->pers == NULL` (array inactive) or `mddev->reshape_position == MaxSector`. I recall that the store was introduced to facilitate interactions with mdadm, specifically during reshape. This leads to the thought "Could a user write to `new_level` when the array isn't active, and what are the implications?"
I inspect `new_level_store` and notice it allows writing to `new_level` at any time. I then remember that `md_run` updates `mddev->new_level` to `pers->head.id` if `mddev->level` and `pers->head.id` differ. In `raid5_run` it hits a bug if `mddev->level` is not `mddev->new_level`. So the question becomes, could it lead to inconsistent reshape? Should `new_level_store` only be allowed if a reshape is happening or array is running?
Finally, I decide to confirm this pattern applies generally by checking `layout_store`, `chunk_size_store`, and `raid_disks_store`.
|
| 251/4 |
2026/09/09 20:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4288 LineCount:45]
Results: map[Contents:4288: xa_lock(&md_submodule);
4289: xa_for_each(&md_submodule, i, head) {
4290: if (head->type != MD_BITMAP || head->id == ID_BITMAP_NONE)
4291: continue;
4292:
4293: if (mddev->bitmap_id == head->id)
4294: len += sprintf(page + len, "[%s] ", head->name);
4295: else
4296: len += sprintf(page + len, "%s ", head->name);
4297: }
4298: xa_unlock(&md_submodule);
4299:
4300: len += sprintf(page + len, "\n");
4301: return len;
4302: }
4303:
4304: static ssize_t
4305: bitmap_type_store(struct mddev *mddev, const char *buf, size_t len)
4306: {
4307: struct md_submodule_head *head;
4308: enum md_submodule_id id;
4309: unsigned long i;
4310: int err = 0;
4311:
4312: xa_lock(&md_submodule);
4313:
4314: if (mddev->bitmap_ops) {
4315: err = -EBUSY;
4316: goto out;
4317: }
4318:
4319: if (cmd_match(buf, "none")) {
4320: mddev->bitmap_id = ID_BITMAP_NONE;
4321: goto out;
4322: }
4323:
4324: xa_for_each(&md_submodule, i, head) {
4325: if (head->type == MD_BITMAP && cmd_match(buf, head->name)) {
4326: mddev->bitmap_id = head->id;
4327: goto out;
4328: }
4329: }
4330:
4331: err = kstrtoint(buf, 10, &id);
4332: if (err)
]
|
| 252/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 54479
output: 36
thoughts: 9
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Hunting Down `layout_store`**
Okay, so I need to get my hands on `layout_store`. It's pretty likely that this is a key data structure or module I'm going to need to work with. Let's start with the assumption it's a variable, a function, or a class. I'm going to want to examine how this store, or module, is used. I'll need to figure out how to locate the declaration of this object, and the best way to do that is to start by searching for it by name in the project's codebase. I'll need to use my editor's search function, grep, or whatever's the most effective tool to find any usage of `layout_store`.
I'll be looking for any clues in its declaration - the type, initialization, etc. And then start following references to it, tracing its use. I expect to be able to see the methods or functions called on it. Is it a state management system? A central repository for layout information? Or possibly a data structure within a rendering engine? I need to quickly ascertain what it's responsible for. Iβll be watching out for things like imports, instantiations, method calls, property accessβ¦ all to build up a mental model of how `layout_store` fits into the broader architecture. I need to understand its relationship to other components in the system. Time to dive in.
|
| 253/4 |
2026/09/09 20:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4370 LineCount:45]
Results: map[Contents:4370: unsigned int n;
4371: int err;
4372:
4373: err = kstrtouint(buf, 10, &n);
4374: if (err < 0)
4375: return err;
4376: err = mddev_lock(mddev);
4377: if (err)
4378: return err;
4379:
4380: if (mddev->pers) {
4381: if (mddev->pers->check_reshape == NULL)
4382: err = -EBUSY;
4383: else if (!md_is_rdwr(mddev))
4384: err = -EROFS;
4385: else {
4386: mddev->new_layout = n;
4387: err = mddev->pers->check_reshape(mddev);
4388: if (err)
4389: mddev->new_layout = mddev->layout;
4390: }
4391: } else {
4392: mddev->new_layout = n;
4393: if (mddev->reshape_position == MaxSector)
4394: mddev->layout = n;
4395: }
4396: mddev_unlock(mddev);
4397: return err ?: len;
4398: }
4399: static struct md_sysfs_entry md_layout =
4400: __ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
4401:
4402: static ssize_t
4403: raid_disks_show(struct mddev *mddev, char *page)
4404: {
4405: if (mddev->raid_disks == 0)
4406: return 0;
4407: if (mddev->reshape_position != MaxSector &&
4408: mddev->delta_disks != 0)
4409: return sprintf(page, "%d (%d)\n", mddev->raid_disks,
4410: mddev->raid_disks - mddev->delta_disks);
4411: return sprintf(page, "%d\n", mddev->raid_disks);
4412: }
4413:
4414: static int update_raid_disks(struct mddev *mddev, int raid_disks);
]
|
| 254/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 55535
output: 36
thoughts: 176
Thoughts: Okay, let me break this down.
**Analyzing Layout and Chunk Size Updates in the MD Driver**
Alright, I'm examining this code snippet, specifically the `layout_store` and `chunk_size_store` functions (though I'm only shown `layout_store` here). I see that it's dealing with modifications to the metadata within a RAID array. The code is clearly attempting to handle the alteration of the array's layout.
First, within `layout_store`, it checks if a personality (`mddev->pers`) is associated with the array (`mddev`). If it *does* have a personality, the code then checks for a `check_reshape` function pointer. This is crucial; it's confirming the personality has a method of handling layout changes during a reshape. If that pointer is NULL, it means the array is *busy* and can't change the layout right now, so `err` is set to `-EBUSY`. Then if the array isn't read/write, the array is read-only and a layout change can't happen, so it returns `-EROFS`.
If the reshape function is available and the array is read/write, the code *then* sets `mddev->new_layout` to the proposed new layout `n`. And then it calls `mddev->pers->check_reshape(mddev)`. This is the *critical* point. I'm assuming the `check_reshape` function is responsible for validating that the proposed layout change is *actually* feasible. If `check_reshape` returns an error (`err` is non-zero), the code immediately reverts `mddev->new_layout` back to the original `mddev->layout`, effectively rejecting the change. This is good defensive programming, protecting against invalid layout changes and ensuring array consistency.
On the other hand, if there's *no* personality (`mddev->pers` is NULL), the code directly sets `mddev->new_layout` to `n`. It seems that without a personality the logic is very basic - it sets the new layout. I need to understand that better. Also the second check on `mddev->reshape_position` will be useful when I examine `chunk_size_store` in context, as this seems to be the critical check for deciding whether to apply the new layout directly, or perhaps the change needs to be staged (or is being done incrementally). If `mddev->reshape_position` is equal to `MaxSector`, it means the reshape operation is complete.
I suspect that the `chunk_size_store` will perform similar checks, but instead look at the chunk size. I'd expect the code there to also assess the validity of the change, and to manage potential rollbacks if an error occurs.
|
| 255/4 |
2026/09/09 20:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4485 LineCount:40]
Results: map[Contents:4485:
4486: err = kstrtoul(buf, 10, &n);
4487: if (err < 0)
4488: return err;
4489:
4490: err = mddev_lock(mddev);
4491: if (err)
4492: return err;
4493: if (mddev->pers) {
4494: if (mddev->pers->check_reshape == NULL)
4495: err = -EBUSY;
4496: else if (!md_is_rdwr(mddev))
4497: err = -EROFS;
4498: else {
4499: mddev->new_chunk_sectors = n >> 9;
4500: err = mddev->pers->check_reshape(mddev);
4501: if (err)
4502: mddev->new_chunk_sectors = mddev->chunk_sectors;
4503: }
4504: } else {
4505: mddev->new_chunk_sectors = n >> 9;
4506: if (mddev->reshape_position == MaxSector)
4507: mddev->chunk_sectors = n >> 9;
4508: }
4509: mddev_unlock(mddev);
4510: return err ?: len;
4511: }
4512: static struct md_sysfs_entry md_chunk_size =
4513: __ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
4514:
4515: static ssize_t
4516: resync_start_show(struct mddev *mddev, char *page)
4517: {
4518: if (mddev->resync_offset == MaxSector)
4519: return sprintf(page, "none\n");
4520: return sprintf(page, "%llu\n", (unsigned long long)mddev->resync_offset);
4521: }
4522:
4523: static ssize_t
4524: resync_start_store(struct mddev *mddev, const char *buf, size_t len)
]
|
| 256/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 56970
output: 37
thoughts: 2748
Thoughts: **Analyzing the Reshape Bug in the Linux MD RAID Driver**
Okay, here's the breakdown of my thought process as I delve into this MD RAID reshape bug. I'm starting by looking at the code snippets provided. I'm focusing on the interaction between `layout_store`, `chunk_size_store`, and `new_level_store`, particularly when `mddev->pers` is NULL and `mddev->reshape_position` is `MaxSector`. It seems the logic around setting `new_*` properties during reshape initialization, when the reshape hasn't actually started, is where I need to focus.
Specifically, I'm concerned that when `mddev->pers == NULL` and `mddev->reshape_position == MaxSector`, both the 'new' variables and the active properties are being set to a value which seems odd if there isn't actually a reshape occurring. I then looked at `new_level_store` which piqued my interest since setting the `new_level` may or may not change `level` depending on conditions. That's a potential area for error.
I know from previous experience that `mdadm --grow` is only used when the array is ACTIVE (reshape is running). So the question is what happens if `new_level_store` is called when `pers == NULL`? I also see that there is no check for the reshape position in `new_level_store`. This could lead to an inconsistent state if it's called when no reshape is in progress.
I went back and thought about the `__md_stop()` function. I know this is called during the array shutdown, and it's essential to clear any pending reshape parameters. The critical point is that when `reshape_position == MaxSector`, the code now sets `mddev->new_level = mddev->level;`. This is supposed to revert the change made, which seems sensible but I need to make sure this happens consistently and doesn't get skipped.
Now I am re-reading the crash report and the root cause explanation. It really helps to see how the user interacts with the system, and that the order of operations is critical. I'm following the sequence of events: array active, reshape requested (number of disks changed), array stopped, and then array restarted. I see the importance of the `__md_stop` function here and it looks like it does not properly reset `mddev->delta_disks`, `mddev->reshape_backwards`, etc..
The prompt includes a code patch. I am examining it closely. It is adding a conditional block to clear the reshape parameters in `__md_stop()` if `mddev->reshape_position == MaxSector`. This feels like it *might* solve the problem, because it should reset these reshape flags. However, I need to make sure that the added conditional doesn't introduce any new subtle problems.
I am re-examining the code again, going back through the functions, especially `__md_stop()`, to make sure that the `mddev->pers` is not null before it is called. Based on my understanding of `md_stop` and `do_md_stop` it *should* always be non-NULL when `__md_stop()` is entered. I am trying to determine if anything will set the value to NULL.
Okay, now I have realized the *critical* piece of the puzzle: I was reading the crash report and looking for clues of where things went wrong, and then I realized that I missed examining what `update_raid_disks()` does to `mddev->raid_disks`! Since the problem is caused by someone changing the number of disks, understanding what `update_raid_disks()` is doing is absolutely crucial to identifying the root cause of the bug. It looks like my next step is to examine that code very closely!
|
| 257/4 |
2026/09/09 20:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:update_raid_disks]
Results: map[SourceCode:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
SourceFile:drivers/md/md.c]
|
| 258/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 61261
output: 38
thoughts: 565
Thoughts: **Analyzing RAID Disk Reshape Logic**
Okay, let's break this down. First, I need to focus on this `update_raid_disks()` function. The code immediately points out that `mddev->raid_disks` isn't actually *modified* within this function itself. It's only calculating `mddev->delta_disks` which represents the change in the number of disks, and setting `mddev->reshape_backwards` based on whether we're shrinking or growing the array. And, of course, a call to `mddev->pers->check_reshape()`.
So, `mddev->raid_disks` is only updated *elsewhere*, specifically when a reshape *starts* or *finishes*. I need to confirm this. Looking at `raid5_start_reshape()`, I see that if `mddev->delta_disks` is positive (expanding the array), we *do* increment `mddev->raid_disks`. Conversely, in `raid5_finish_reshape()`, if `mddev->delta_disks` is negative (shrinking), we decrement `mddev->raid_disks`.
Here's the critical bit: when the reshape position (`reshape_position`) is equal to `MaxSector`, `mddev->raid_disks` will *not* have been updated if `delta_disks > 0`. Because, in that case, the reshape hasn't started yet!
Okay, but what about the negative `delta_disks` case, shrinking the array? Ah, right. If the array is shrinking (`delta_disks < 0`), `mddev->raid_disks` isn't touched in `raid5_start_reshape()`. It only gets updated in `raid5_finish_reshape()`. So when `reshape_position` is `MaxSector`, it hasn't started yet.
Therefore, at the point when `reshape_position == MaxSector`, `mddev->raid_disks` *still* has its original, pre-reshape value, regardless of whether we're adding or removing disks. That's a key point.
Now, I need to understand what `raid5_check_reshape` is doing here. It's time to dig into the `raid5.c` code to see if this explains the logic.
|
| 259/4 |
2026/09/09 20:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:raid5_check_reshape]
Results: map[SourceCode:8974: static int raid5_check_reshape(struct mddev *mddev)
8975: {
8976: /* For a 2-drive array, the layout and chunk size can be changed
8977: * immediately as not restriping is needed.
8978: * For larger arrays we record the new value - after validation
8979: * to be used by a reshape pass.
8980: */
8981: struct r5conf *conf = mddev->private;
8982: int new_chunk = mddev->new_chunk_sectors;
8983:
8984: if (mddev->new_layout >= 0 && !algorithm_valid_raid5(mddev->new_layout))
8985: return -EINVAL;
8986: if (new_chunk > 0) {
8987: if (!is_power_of_2(new_chunk))
8988: return -EINVAL;
8989: if (new_chunk < (PAGE_SIZE>>9))
8990: return -EINVAL;
8991: if (mddev->array_sectors & (new_chunk-1))
8992: /* not factor of array size */
8993: return -EINVAL;
8994: }
8995:
8996: /* They look valid */
8997:
8998: if (mddev->raid_disks == 2) {
8999: /* can make the change immediately */
9000: if (mddev->new_layout >= 0) {
9001: conf->algorithm = mddev->new_layout;
9002: mddev->layout = mddev->new_layout;
9003: }
9004: if (new_chunk > 0) {
9005: conf->chunk_sectors = new_chunk ;
9006: mddev->chunk_sectors = new_chunk;
9007: }
9008: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
9009: md_wakeup_thread(mddev->thread);
9010: }
9011: return check_reshape(mddev);
9012: }
SourceFile:drivers/md/raid5.c]
|
| 260/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 63014
output: 35
thoughts: 25
Thoughts: Here's my summary, as if I were thinking these thoughts:
**Analyzing the RAID5 Reshape Function**
Alright, let's dive into this. My focus is now on the `check_reshape(mddev)` function, specifically within the `drivers/md/raid5.c` file. I need to understand its role in this reshape operation. I know RAID5 is complex, so I'm expecting this function to be critical in ensuring data integrity and consistency during the process of reshaping the array. It's likely involved in validating the new configuration against the existing data, perhaps checking for parity consistency or verifying the layout. I'll need to carefully examine its logic to see how it handles potential errors and ensures a smooth transition to the new RAID configuration. This is going to be key to understanding the overall reshape implementation. Let's see what it does.
|
| 261/4 |
2026/09/09 20:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/raid5.c Name:check_reshape]
Results: map[SourceCode:8586: static int check_reshape(struct mddev *mddev)
8587: {
8588: struct r5conf *conf = mddev->private;
8589:
8590: if (raid5_has_log(conf) || raid5_has_ppl(conf))
8591: return -EINVAL;
8592: if (mddev->delta_disks == 0 &&
8593: mddev->new_layout == mddev->layout &&
8594: mddev->new_chunk_sectors == mddev->chunk_sectors)
8595: return 0; /* nothing to do */
8596: if (has_failed(conf))
8597: return -EINVAL;
8598: if (!mddev->new_chunk_sectors)
8599: return -EINVAL;
8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
8601: /* We might be able to shrink, but the devices must
8602: * be made bigger first.
8603: * For raid6, 4 is the minimum size.
8604: * Otherwise 2 is the minimum
8605: */
8606: int min = 2;
8607: if (mddev->level == 6)
8608: min = 4;
8609: if (mddev->raid_disks + mddev->delta_disks < min)
8610: return -EINVAL;
8611: }
8612:
8613: if (!check_stripe_cache(mddev))
8614: return -ENOSPC;
8615:
8616: if (mddev->bitmap_id == ID_LLBITMAP &&
8617: mddev->new_chunk_sectors < mddev->chunk_sectors)
8618: return -EOPNOTSUPP;
8619: if (mddev->new_chunk_sectors > mddev->chunk_sectors ||
8620: mddev->delta_disks > 0)
8621: if (resize_chunks(conf,
8622: conf->previous_raid_disks
8623: + max(0, mddev->delta_disks),
8624: max(mddev->new_chunk_sectors,
8625: mddev->chunk_sectors)
8626: ) < 0)
8627: return -ENOMEM;
8628:
8629: if (conf->previous_raid_disks + mddev->delta_disks <= conf->pool_size)
8630: return 0; /* never bother to shrink */
8631: return resize_stripes(conf, (conf->previous_raid_disks
8632: + mddev->delta_disks));
8633: }
SourceFile:drivers/md/raid5.c]
|
| 262/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 64077
output: 36
thoughts: 1043
Thoughts: **Analyzing RAID Reshape Termination and Restart**
Okay, so I'm digging into this RAID reshape and restart scenario. My initial thought is that the `check_reshape` function is doing some validation and potentially resizing stripe caches in memory, and this is all tied to the `conf` structure. This `conf` data, which is essentially `mddev->private`, gets completely freed in `__md_stop()` when the array is stopped, via the `pers->free()` function. Therefore, any stripe caches allocated during `check_reshape` are gone when the array is stopped!
Now, the `mddev` struct itself still contains a few key pieces of reshape metadata: `mddev->delta_disks`, `mddev->reshape_backwards`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors`. Critically, these *were never written to disk* because `mddev->reshape_position` is equal to `MaxSector`.
When the array restarts, `setup_conf(mddev)` is called to allocate a fresh `conf` structure. The code *assumes* a clean, non-reshape array if `mddev->reshape_position` is `MaxSector`. Subsequently, `raid5_run` has assertions with `BUG_ON`:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
This tells me I need to be *absolutely* sure that these reshape parameters are reset appropriately when the reshape completes and `mddev->reshape_position` is equal to `MaxSector`. So, I'm going to carefully review the fields of the `mddev` structure:
```c
sector_t reshape_position;
int delta_disks, new_level, new_layout;
int new_chunk_sectors;
int reshape_backwards;
```
When `mddev->reshape_position == MaxSector`, it appears that:
* `mddev->delta_disks` should be zeroed.
* `mddev->reshape_backwards` is also set to zero.
* `mddev->new_level` should be set to `mddev->level`.
* `mddev->new_layout` should be set to `mddev->layout`.
* `mddev->new_chunk_sectors` is set to `mddev->chunk_sectors`.
However, the question of `rdev->new_data_offset = rdev->data_offset;` is also relevant. That needs additional scrutiny.
Looking closer, in `raid5_run`, I see how `min_offset_diff` is calculated (lines 8013-8024):
```c
diff = (rdev->new_data_offset - rdev->data_offset);
if (first) {
min_offset_diff = diff;
first = 0;
} else if (mddev->reshape_backwards &&
diff < min_offset_diff)
min_offset_diff = diff;
else if (!mddev->reshape_backwards &&
diff > min_offset_diff)
min_offset_diff = diff;
```
And then in `raid5_run`:
```c
if (mddev->reshape_position != MaxSector) {
...
if (here_new * chunk_sectors + min_offset_diff <= ...)
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
Importantly, when `reshape_position == MaxSector`, `min_offset_diff` is *not* used in the `else` branch of that conditional.
Then, I reviewed the validate functions `super_1_validate()` and `super_90_validate()` and neither touches `rdev->new_data_offset`! In fact, `rdev->new_data_offset` is *only* modified in `reshape_position_store()` when explicit manual repositioning occurs.
Given all this, I
|
| 263/4 |
2026/09/09 20:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6730 LineCount:80]
Results: map[Contents:6730: if (mddev->level != pers->head.id) {
6731: mddev->level = pers->head.id;
6732: mddev->new_level = pers->head.id;
6733: }
6734: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
6735:
6736: if (mddev->reshape_position != MaxSector &&
6737: pers->start_reshape == NULL) {
6738: /* This personality cannot handle reshaping... */
6739: put_pers(pers);
6740: return -EINVAL;
6741: }
6742:
6743: if (pers->sync_request) {
6744: /* Warn if this is a potentially silly
6745: * configuration.
6746: */
6747: struct md_rdev *rdev2;
6748: int warned = 0;
6749:
6750: rdev_for_each(rdev, mddev)
6751: rdev_for_each(rdev2, mddev) {
6752: if (rdev < rdev2 &&
6753: rdev->bdev->bd_disk ==
6754: rdev2->bdev->bd_disk) {
6755: pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",
6756: mdname(mddev),
6757: rdev->bdev,
6758: rdev2->bdev);
6759: warned = 1;
6760: }
6761: }
6762:
6763: if (warned)
6764: pr_warn("True protection against single-disk failure might be compromised.\n");
6765: }
6766:
6767: /* dm-raid expect sync_thread to be frozen until resume */
6768: if (!mddev_is_dm(mddev))
6769: mddev->recovery = 0;
6770:
6771: /* may be over-ridden by personality */
6772: mddev->resync_max_sectors = mddev->dev_sectors;
6773:
6774: mddev->ok_start_degraded = start_dirty_degraded;
6775:
6776: if (start_readonly && md_is_rdwr(mddev))
6777: mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
6778:
6779: err = pers->run(mddev);
6780: if (err)
6781: pr_warn("md: pers->run() failed ...\n");
6782: else if (pers->size(mddev, 0, 0) < mddev->array_sectors) {
6783: WARN_ONCE(!mddev->external_size,
6784: "%s: default size too small, but 'external_size' not in effect?\n",
6785: __func__);
6786: pr_warn("md: invalid array_size %llu > default size %llu\n",
6787: (unsigned long long)mddev->array_sectors / 2,
6788: (unsigned long long)pers->size(mddev, 0, 0) / 2);
6789: err = -EINVAL;
6790: }
6791: if (err == 0 && pers->sync_request &&
6792: (mddev->bitmap_info.file || mddev->bitmap_info.offset)) {
6793: err = md_bitmap_create(mddev);
6794: if (err)
6795: pr_warn("%s: failed to create bitmap (%d)\n",
6796: mdname(mddev), err);
6797: }
6798: if (err)
6799: goto bitmap_abort;
6800:
6801: if (mddev->bitmap_info.max_write_behind > 0) {
6802: bool create_pool = false;
6803:
6804: rdev_for_each(rdev, mddev) {
6805: if (test_bit(WriteMostly, &rdev->flags) &&
6806: rdev_init_serial(rdev))
6807: create_pool = true;
6808: }
6809: if (create_pool && mddev->serial_info_pool == NULL) {
]
|
| 264/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 67476
output: 36
thoughts: 24
Thoughts: Here's my analysis of the provided snippet, framed as my own thought process:
**Diving into `bitmap_abort`**
Okay, so we need to scrutinize `bitmap_abort` from lines 6860 to 6875. I'm going to want to understand its purpose within the broader context. What are the preconditions for this function's execution? What specific error conditions or states trigger this particular abort mechanism? I'll be looking for things like memory management implications. Is there potential for resource leaks if the abort happens at a critical point? Does it employ any cleanup routines or exception handling? Any unusual bit manipulation or data structures should draw my immediate attention. I will be looking to see if this particular subroutine is robust, and efficient. Does it log information for debugging purposes?
|
| 265/4 |
2026/09/09 20:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6860 LineCount:20]
Results: map[Contents:6860:
6861: md_new_event();
6862: return 0;
6863:
6864: bitmap_abort:
6865: mddev_detach(mddev);
6866: if (mddev->private)
6867: pers->free(mddev, mddev->private);
6868: mddev->private = NULL;
6869: put_pers(pers);
6870: md_bitmap_destroy(mddev);
6871: return err;
6872: }
6873: EXPORT_SYMBOL_GPL(md_run);
6874:
6875: int do_md_run(struct mddev *mddev)
6876: {
6877: int err;
6878:
6879: set_bit(MD_NOT_READY, &mddev->flags);
]
|
| 266/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 67970
output: 33
thoughts: 165
Thoughts: **Investigating Potential Data Corruption in the RAID5 Reshape Process**
Okay, so I'm looking at this `bitmap_abort` function. The main thing that jumps out is the potential for issues if `md_bitmap_create` or something similar fails *after* `pers->run()` has already executed. It's cleaning up the `mddev->private` and putting `pers`, which is standard practice for handling errors. But a thought hits me: should `bitmap_abort` also be resetting those reshape parameters if `mddev->reshape_position` is already at `MaxSector`? That feels like a potential oversight.
Then I get a crucial flash: hold on, did `pers->run()` in `md_run()` β which would be, in this case, `raid5_run()` β possibly change `reshape_position` or any of those critical reshape parameters *before* the failure? That's the real question. If `raid5_run()` modifies these things *before* an error, we have a major problem if those changes aren't properly undone.
Right, time to check `raid5_run()` in the `raid5.c` file. I need to be sure that it is changing `mddev->delta_disks`, `new_level`, `new_layout`, or `new_chunk_sectors` and, if so, how the function recovers if it fails to complete.
Let's dive into the code and search for assignments to `delta_disks` within `raid5.c`. This needs a thorough investigation!
|
| 267/4 |
2026/09/09 20:43 |
tool |
grepper |
0m
Args: map[Expression:delta_disks = PathPrefix:drivers/md/raid5.c]
Results: map[Output:drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8084- * from */
drivers/md/raid5.c:8085: if (mddev->delta_disks == 0) {
drivers/md/raid5.c-8086- /* We cannot be sure it is safe to start an in-place
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8591- return -EINVAL;
drivers/md/raid5.c:8592: if (mddev->delta_disks == 0 &&
drivers/md/raid5.c-8593- mddev->new_layout == mddev->layout &&
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8842- mddev->reshape_position = MaxSector;
drivers/md/raid5.c:8843: mddev->delta_disks = 0;
drivers/md/raid5.c-8844- mddev->reshape_backwards = 0;
--
drivers/md/raid5.c=8883=static void *raid45_takeover_raid0(struct mddev *mddev, int level)
--
drivers/md/raid5.c-8901- mddev->raid_disks += 1;
drivers/md/raid5.c:8902: mddev->delta_disks = 1;
drivers/md/raid5.c-8903- /* make sure it will be not marked as dirty */
--
drivers/md/raid5.c=8941=static void *raid5_takeover_raid6(struct mddev *mddev)
--
drivers/md/raid5.c-8968- mddev->new_layout = new_layout;
drivers/md/raid5.c:8969: mddev->delta_disks = -1;
drivers/md/raid5.c-8970- mddev->raid_disks -= 1;
--
drivers/md/raid5.c=9076=static void *raid6_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9116- mddev->new_layout = new_layout;
drivers/md/raid5.c:9117: mddev->delta_disks = 1;
drivers/md/raid5.c-9118- mddev->raid_disks += 1;
]
|
| 268/4 |
2026/09/09 20:43 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 69209
output: 32
thoughts: 675
Thoughts: **Analyzing RAID Reshape and Shutdown Logic**
Okay, let's break this down. My initial focus is on how the reshape process interacts with the overall MD device lifecycle, specifically during takeover and shutdown.
First, in `raid5_finish_reshape`, it's clear the reshape is considered complete when `reshape_position` is set to `MaxSector`, and `delta_disks` and `reshape_backwards` are reset. This is the expected completion state.
Then, looking at `level_store` during takeover, if it *succeeds*, the MD device's level, layout, and chunk size are updated to the new values, and `delta_disks` and `reshape_backwards` are reset. Crucially, if the takeover *fails*, the original MD device parameters are *reverted* β level, layout, chunk size are reset. This is a crucial rollback mechanism. `level_store` seems designed to clean up state whether or not the takeover succeeds.
Next, I'm examining `__md_stop()`. Here, `mddev_detach()`, `md_bitmap_destroy()`, and the removal of the personality are expected. The key detail is that *before* the personality is freed, `reshape_position` is checked. If reshape is "finished" (i.e. `reshape_position == MaxSector`), then `delta_disks`, `reshape_backwards`, and the "new" MD parameters are reset *again*. This feels a bit redundant. Maybe it's a safety net, ensuring the state is consistent on shutdown, regardless of what the takeover process did.
Now, a couple of questions are bubbling up:
1. What if `bitmap_abort` is called during the run process in `md_run()`? Does this change the flow of control?
2. If the personality's `run()` method *succeeds*, could that method have set `mddev->reshape_position` in the first place? If so, this would skip the check and reset in `__md_stop()`. I need to ensure the logic here is sound. I need to understand if the reshape is considered active during the run.
3. Specifically, does `raid5_run()` ever set `reshape_position`? I need to know where and how the `reshape_position` variable is used within the RAID5 implementation. I need to quickly scan the code to look for all assignments to `reshape_position` within `raid5.c`. This is essential to understand the overall process and state transitions. I need to make sure this is what I think it is.
|
| 269/4 |
2026/09/09 20:43 |
tool |
grepper |
0m
Args: map[Expression:reshape_position = PathPrefix:drivers/md/raid5.c]
Results: map[Output:drivers/md/raid5.c=6218=static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
--
drivers/md/raid5.c-6249- if (rw == READ && mddev->degraded == 0 &&
drivers/md/raid5.c:6250: mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-6251- bi = chunk_aligned_read(mddev, bi);
--
drivers/md/raid5.c=6379=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
--
drivers/md/raid5.c-6525- }
drivers/md/raid5.c:6526: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6527- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c-6641- }
drivers/md/raid5.c:6642: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6643- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7725- conf->raid_disks = mddev->raid_disks;
drivers/md/raid5.c:7726: if (mddev->reshape_position == MaxSector)
drivers/md/raid5.c-7727- conf->previous_raid_disks = mddev->raid_disks;
--
drivers/md/raid5.c=8444=static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/raid5.c-8507- if (test_bit(WantReplacement, &tmp->flags) &&
drivers/md/raid5.c:8508: mddev->reshape_position == MaxSector &&
drivers/md/raid5.c-8509- p->replacement == NULL) {
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
--
drivers/md/raid5.c=8635=static int raid5_start_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8755- mddev->raid_disks = conf->raid_disks;
drivers/md/raid5.c:8756: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-8757- set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
--
drivers/md/raid5.c=8772=static void end_reshape(struct r5conf *conf)
--
drivers/md/raid5.c-8791- conf->reshape_progress = MaxSector;
drivers/md/raid5.c:8792: conf->mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8793- rdev_for_each(rdev, conf->mddev)
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8841- mddev->chunk_sectors = conf->chunk_sectors;
drivers/md/raid5.c:8842: mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8843- mddev->delta_disks = 0;
]
|
| 270/4 |
2026/09/09 20:43 |
llm |
patch-generator-compressor |
0m
Model:
Reply: ### Execution History & Workspace Summary
#### 1. Approaches Explored and Results
- **Crash Reproduction & Root Cause Identification**:
- Syzkaller hit `kernel BUG at drivers/md/raid5.c:8117!` inside `raid5_run()`.
- Cause: A RAID5 array was active, reshape was queued/configured via sysfs (`delta_disks = 1`, `new_level`, `new_layout`, etc. modified), but reshape never started (`mddev->reshape_position` remained `MaxSector`).
- The array was stopped into `inactive` state via `array_state = "inactive"`, triggering `do_md_stop(mddev, 2)`.
- `do_md_stop(mddev, 2)` calls `__md_stop_writes(mddev)` and `__md_stop(mddev)`.
- `__md_stop(mddev)` detached the personality (`pers = NULL`) and freed private structures, but failed to reset uncommitted reshape parameters when no reshape was active (`mddev->reshape_position == MaxSector`).
- In contrast, a full stop/disassembly (`mode == 0`) invokes `md_clean(mddev)`, which properly zeroes all fields. `mode == 2` bypasses `md_clean(mddev)`, leaving stale reshape state in memory.
- Restarting the array (`array_state = "active"`) invokes `md_run()` -> `raid5_run()`. Because `reshape_position == MaxSector`, `raid5_run()` enters the non-reshape branch and executes:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // Triggered panic
```
- **Analysis of Subsystem Conventions & Invariants Across `drivers/md/md.c`**:
- `mddev->reshape_position == MaxSector` is the universal invariant across the entire MD subsystem indicating that no reshape is actively running.
- Superblock sync routines (`super_1_sync`, `super_90_sync`) only write reshape parameters to disk when `mddev->reshape_position != MaxSector`.
- Superblock validation routines (`super_1_validate` lines 2066-2070, `super_90_validate` lines 1520-1524) reset reshape parameters when `MD_FEATURE_RESHAPE_ACTIVE` is not set:
```c
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
- Attribute store `reshape_position_store()` (lines 5738-5743) uses the exact same reset:
```c
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
- Attribute store `level_store()` (lines 4136-4141, 4158-4162) rolls back or applies the exact same set of fields.
- Investigated `new_level` sysfs attribute added in commit `d981ed841930` (Sep 2024), confirming `new_level` records target level for reshape and ties into the same set of fields.
- **Investigation of Stopping Paths**:
- `__md_stop()` is called in `do_md_stop()` and `md_stop()`.
- In both paths, `reconfig_mutex` is guaranteed held (`lockdep_assert_held(&mddev->reconfig_mutex)` is explicit in `md_stop()`).
- Sync thread and pending writes are stopped before `__md_stop()` via `stop_sync_thread()` and `__md_stop_writes()`.
- Checking and resetting pending fields in `__md_stop()` when `mddev->reshape_position == MaxSector` is race-free, thread-safe, and covers all stop/deactivate triggers (ioctl, sysfs, dm-raid).
- If `mddev->reshape_position != MaxSector`, an active reshape was underway, so `__md_stop()` must preserve the reshape parameters so the reshape can resume on restart.
#### 2. Current Hypotheses & Proposed Solution
- **Root Cause**: Stale uncommitted reshape parameters persist across array deactivation/stop cycles when `mddev->reshape_position == MaxSector`.
- **Selected Fix**:
In `drivers/md/md.c` inside `__md_stop(struct mddev *mddev)`:
After personality detachment and bitmap destruction, if `mddev->reshape_position == MaxSector`, reset:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
- **Scope Restriction**: Keep the fix strictly within `drivers/md/md.c`. Do not edit personality files (`raid5.c`, `raid10.c`). The bug is in the array lifecycle teardown in the MD core.
#### 3. Critical Code Snippets & File Paths
- `drivers/md/md.c`:
- `__md_stop()` (lines 7084-7098):
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
```
- `super_1_validate()` (lines 2066-2070) & `super_90_validate()` (lines 1520-1524): Canonical pattern for inactive reshape state.
- `reshape_position_store()` (lines 5738-5743): Identical reset logic.
- `drivers/md/raid5.c`:
- `raid5_run()` (lines 8113-8118): Assertion causing panic when `reshape_position == MaxSector` but reshape parameters are non-zero/mismatched.
#### 4. Watchouts & Loop Prevention
- Do not modify `raid5.c` or other personality drivers; fix must remain in `md.c`.
- Never reset parameters unconditionally; the condition `if (mddev->reshape_position == MaxSector)` is mandatory to prevent corrupting in-progress reshapes that are meant to resume across array stops and restarts.
Tokens:
input: 53969
output: 1759
thoughts: 0
|
| 271/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 32160
output: 36
thoughts: 675
Thoughts: **Analyzing Reshape State in RAID5**
Okay, let me think this through. `reshape_position` is *only* set at the start of a reshape (`raid5_start_reshape`) and updated during the reshape process (`reshape_request`). It gets reset when the reshape is finished or aborted. The critical thing here is that `pers->run()` doesn't directly touch `mddev->reshape_position`.
Now, that brings me to `bitmap_abort`. What exactly *should* it be doing? My initial thought is... what if it were to reset reshape fields there? I remember `bitmap_abort` is called in the failure paths. Looking closely at the code... `bitmap_abort` gets called *after* `pers->run` has succeeded, which means the array *should* be running according to `pers->run`! But `bitmap_abort` calls `mddev_detach`, `pers->free`, `put_pers`, and `md_bitmap_destroy`. So it's tearing down the array.
Aha, and what if `__md_stop()` isn't even called if `md_run()` fails? The error handling in `bitmap_abort` takes care of the failure handling after `md_run` calls the underlying `pers->run()`. This also means that, before `pers->run(mddev)`, `mddev->reshape_position` hasn't been changed.
So, if `bitmap_abort` is reached, I'm thinking about the scenario where `mddev->reshape_position` *would* be `MaxSector` - which would be if it was `MaxSector` before `md_run()`.
The key is in `bitmap_abort`. And, yes! `bitmap_abort` *does* reset the reshape fields if `mddev->reshape_position == MaxSector`! The code snippet confirms it: it resets `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`.
But hang on... Why would `pers->run()` succeed if a reshape was pending but *inactive*? My thought process then leads me to `raid5_run`! That's it! If a reshape was pending but inactive ( `mddev->reshape_position == MaxSector`, but `mddev->delta_disks != 0` ), `raid5_run` would have failed at a `BUG_ON` *before* returning to `md_run()`! So, `raid5_run` would *not* succeed with `delta_disks != 0` when `reshape_position == MaxSector`!
This means that if `md_run()` fails *before* `pers->run()` or within `pers->run()`, `bitmap_abort` isn't even reached. The `goto bitmap_abort` is only after the `pers->run(mddev)` line (6799).
Let me double check around `__md_stop` in `drivers/md/md.c` (lines 7080-7110) now to reinforce my current understanding.
|
| 272/4 |
2026/09/09 20:44 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7080 LineCount:35]
Results: map[Contents:7080: if (!mddev_is_dm(mddev))
7081: blk_sync_queue(mddev->gendisk->queue);
7082: }
7083:
7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
7110:
7111: EXPORT_SYMBOL_GPL(md_stop);
7112:
7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
]
|
| 273/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 34065
output: 36
thoughts: 24
Thoughts: Okay, let's dive into this. I need to get a handle on the `do_md_stop()` function. Specifically, I need to understand what's happening within lines 7160 to 7240. I know this code, so I anticipate the function handles some crucial stopping condition or cleanup for the Markdown processing. My primary goal here is to get a solid grasp of *why* it's implemented this way, what edge cases it covers, and if there are any potential optimizations or vulnerabilities I need to be aware of. I'll need to look for conditional logic, error handling, and any resource management related to that section. Essentially, I'm peeling back the layers to understand the mechanics and intent. I will look for any external dependencies it has, like other functions or variables, so I can better grasp the bigger picture.
|
| 274/4 |
2026/09/09 20:44 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7160 LineCount:80]
Results: map[Contents:7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
7232:
7233: #ifndef MODULE
7234: static void autorun_array(struct mddev *mddev)
7235: {
7236: struct md_rdev *rdev;
7237: int err;
7238:
7239: if (list_empty(&mddev->disks))
]
|
| 275/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 35517
output: 34
thoughts: 83
Thoughts: Okay, let's break this down.
**Diving Deep into `do_md_stop()` and Its Cleanup Process**
Alright, I'm digging into this `do_md_stop()` function. My focus is on what happens when the `mode` variable is set to 0. It looks like the first thing it does is call `__md_stop(mddev)` β line 7193, if I'm reading this right. Makes sense, that's likely the core stopping mechanism. But it doesn't end there. After that, on line 7224, it calls `md_clean(mddev)`. That's where things get interesting. I need to understand what `md_clean(mddev)` actually *does* β what are the cleanup implications, what does it mean for the data on the devices, and how does that process relate to the stop? Right, time to dive into that `md_clean` function and see what's really happening during this shutdown sequence.
|
| 276/4 |
2026/09/09 20:44 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 277/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 37053
output: 41
thoughts: 1239
Thoughts: **Analyzing the Array Stop and Restart Logic**
Okay, let's break this down. I'm looking at the `md_clean` function and how it behaves differently based on the `mode` parameter during array shutdown. When `mode` is 0 (full disassembly), we get a complete cleanup. But when `mode` is 2 (inactive but not disassembled), things get more interesting, as `__md_stop` is called.
The key is what `__md_stop` *doesn't* do. It frees the personality (`pers`) and private data, which is standard. However, it *doesn't* reset `delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors`, and `reshape_backwards`. These are left as they are. That's immediately a red flag. If a reshape was in progress, indicated by `mddev->reshape_position != MaxSector`, then that's potentially fine, the values can be resumed. But if `mddev->reshape_position == MaxSector`, it means no reshape was active, but those "pending reshape" parameters were *still* left around!
Now, fast forward to array reactivation via `md_run()`. It calls `pers->run(mddev)`. In the `raid5_run` function, we see checks. If reshape was *not* active ( `mddev->reshape_position == MaxSector`), it runs a few `BUG_ON` checks:
* `BUG_ON(mddev->level != mddev->new_level);`
* `BUG_ON(mddev->layout != mddev->new_layout);`
* `BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);`
* `BUG_ON(mddev->delta_disks != 0);`
And it's clear: those `BUG_ON` triggers when we reactivate the array! The previous `__md_stop` function did not reset those values!
Okay, so the fix seems clear: let's add some code in `__md_stop()`:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
This ensures, when we stop the array *without* disassembly, if no reshape was in progress, it zeroes out all those "pending reshape" parameters. With these changes, all the four `BUG_ON` conditions in `raid5_run` will be satisfied, and the array can be safely restarted.
Additionally, this aligns with how `super_1_validate`, `super_90_validate`, and `reshape_position_store` functions currently behave. If no reshape is active, these functions also reset `delta_disks`, `new_level`, `new_layout`, and `new_chunk_sectors`.
I need to do a thorough review of the MD code to ensure this is the only spot we need to fix. Time to comb through the callers of `__md_stop` to make sure there are no other array stop/state change paths that could hit this condition or some variant of this issue.
|
| 278/4 |
2026/09/09 20:44 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:5 Name:__md_stop]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7193 SourceSnippet:7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:md_stop SourceFile:drivers/md/md.c SourceLine:7108 SourceSnippet:7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
]] TruncatedOutput:false]
|
| 279/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 39484
output: 28
thoughts: 66
Thoughts: **My Analysis of the Array Stop Paths**
Okay, so I'm looking at the `__md_stop()` function and I've noticed something. According to the code, it's *only* called from `do_md_stop()` and `md_stop()`. And both of those, as far as I can see, are core to the array stop paths.
That's a key observation. Now I need to confirm whether any other part of `drivers/md/md.c` is detaching `pers` from the array or potentially setting it to `NULL`. I need to ensure the stop logic is consistent and doesn't have any unexpected side effects from other interactions with the data structure. Time to drill down further.
|
| 280/4 |
2026/09/09 20:44 |
tool |
grepper |
0m
Args: map[Expression:->pers = NULL PathPrefix:drivers/md/]
Results: map[Output:drivers/md/md.c=7084=static void __md_stop(struct mddev *mddev)
--
drivers/md/md.c-7090- spin_lock(&mddev->lock);
drivers/md/md.c:7091: mddev->pers = NULL;
drivers/md/md.c-7092- spin_unlock(&mddev->lock);
]
|
| 281/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 39847
output: 32
thoughts: 247
Thoughts: **My Growing Unease with `mddev->pers`**
Okay, so `__md_stop()` in `md.c` is the *only* place where `mddev->pers` is explicitly set to `NULL`. That's a key observation. Now, I'm trying to trace the lifecycle of this variable, especially in failure scenarios, so let's look at `bitmap_abort` in `md_run()`. The question is, does *that* function also nullify `mddev->pers`?
Let's quickly check lines 6864-6872 in `drivers/md/md.c`: (The provided code snippet). Nope! It doesn't look like `bitmap_abort` is explicitly setting `mddev->pers` to `NULL`.
Hold on. Why wouldn't it? It's detaching, freeing resources... that seems like the kind of place where you *would* want to ensure that pointer is cleared. This is not what I expected. This is weird... I'm missing something here.
Okay, let's back up. If `bitmap_abort` *isn't* clearing `mddev->pers`, where was it even initialized in the first place within `md_run()`? I need to know where it's being set so I can understand the complete control flow. Let's do a quick search for `mddev->pers =` within `md.c`. I need to figure out the setting and clearing logic of this pointer.
|
| 282/4 |
2026/09/09 20:44 |
tool |
grepper |
0m
Args: map[Expression:mddev->pers = PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=429=static void md_submit_bio(struct bio *bio)
--
drivers/md/md.c-433-
drivers/md/md.c:434: if (mddev == NULL || mddev->pers == NULL) {
drivers/md/md.c-435- bio_io_error(bio);
--
drivers/md/md.c=915=void mddev_unlock(struct mddev *mddev)
--
drivers/md/md.c-944- sysfs_remove_group(&mddev->kobj, to_remove);
drivers/md/md.c:945: if (mddev->pers == NULL ||
drivers/md/md.c-946- mddev->pers->sync_request == NULL) {
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1553-
drivers/md/md.c:1554: } else if (mddev->pers == NULL) {
drivers/md/md.c-1555- /* Insist on good event counter while assembling, except
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2090- }
drivers/md/md.c:2091: } else if (mddev->pers == NULL) {
drivers/md/md.c-2092- /* Insist of good event counter while assembling, except for
--
drivers/md/md.c-2120- rdev->desc_nr = -1;
drivers/md/md.c:2121: } else if (mddev->pers == NULL && freshest && ev1 < mddev->events) {
drivers/md/md.c-2122- /*
--
drivers/md/md.c=3082=state_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3169- !test_bit(Journal, &rdev->flags)) {
drivers/md/md.c:3170: if (rdev->mddev->pers == NULL) {
drivers/md/md.c-3171- clear_bit(In_sync, &rdev->flags);
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4065-
drivers/md/md.c:4066: if (mddev->pers == NULL) {
drivers/md/md.c-4067- memcpy(mddev->clevel, buf, slen);
--
drivers/md/md.c-4154- oldpriv = mddev->private;
drivers/md/md.c:4155: mddev->pers = pers;
drivers/md/md.c-4156- mddev->private = priv;
--
drivers/md/md.c=5929=static ssize_t serialize_policy_show(struct mddev *mddev, char *page)
drivers/md/md.c-5930-{
drivers/md/md.c:5931: if (mddev->pers == NULL || (mddev->pers->head.id != ID_RAID1))
drivers/md/md.c-5932- return sprintf(page, "n/a\n");
--
drivers/md/md.c=5943=serialize_policy_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5957- return err;
drivers/md/md.c:5958: if (mddev->pers == NULL || (mddev->pers->head.id != ID_RAID1)) {
drivers/md/md.c-5959- pr_err("md: serialize_policy is only effective for raid1\n");
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6840- spin_lock(&mddev->lock);
drivers/md/md.c:6841: mddev->pers = pers;
drivers/md/md.c-6842- spin_unlock(&mddev->lock);
--
drivers/md/md.c=7084=static void __md_stop(struct mddev *mddev)
--
drivers/md/md.c-7090- spin_lock(&mddev->lock);
drivers/md/md.c:7091: mddev->pers = NULL;
drivers/md/md.c-7092- spin_unlock(&mddev->lock);
--
drivers/md/md.c=8230=static int set_disk_faulty(struct mddev *mddev, dev_t dev)
--
drivers/md/md.c-8234-
drivers/md/md.c:8235: if (mddev->pers == NULL)
drivers/md/md.c-8236- return -ENODEV;
]
|
| 283/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 41843
output: 28
thoughts: 361
Thoughts: **Debugging a Kernel Panic in the RAID Code**
Okay, so I'm chasing a crash, likely in the RAID code. I've pinpointed a potential issue related to `bitmap_abort` and the `mddev->pers` pointer. The core of it is that `mddev->pers` is assigned *after* the call to `bitmap_abort` within the `md_run()` function, specifically at line 6841. This means, *before* that assignment, in the context of `bitmap_abort`, `mddev->pers` would still be `NULL`. This immediately screams a potential null-pointer dereference.
I need to confirm this. I'll re-examine the `__md_stop()` function. Looking at its structure, I see that the `mddev->pers` field is indeed set to `NULL` *after* a call to `mddev_detach()`, and `md_bitmap_destroy()`. If something calls a function in the `mddev->pers` structure after `bitmap_abort` and before `mddev->pers` is initialized, it is going to crash. And that's exactly what I'm looking for.
I'm also curious about the `mddev->reshape_backwards` field. The code snippet shows this field being set to `0` when `reshape_position` is equal to `MaxSector`, after `mddev->pers` is nullified. I need to make sure that field isn't being used in an inappropriate way under these conditions. I need to search the codebase for usages of `reshape_backwards` with an emphasis on its use when `reshape_position` is `MaxSector`, or if the value might be checked after it's been reset to zero. This could be a separate, but related, issue contributing to the crash. I'll need to do a thorough code search in `drivers/md/`.
|
| 284/4 |
2026/09/09 20:44 |
tool |
grepper |
0m
Args: map[Expression:reshape_backwards PathPrefix:drivers/md/]
Results: map[Output:drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2168-
drivers/md/dm-raid.c:2169: if (mddev->delta_disks < 0 || mddev->reshape_backwards)
drivers/md/dm-raid.c-2170- sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_BACKWARDS);
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2283- (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS)))
drivers/md/dm-raid.c:2284: mddev->reshape_backwards = 1;
drivers/md/dm-raid.c-2285- else
drivers/md/dm-raid.c:2286: mddev->reshape_backwards = 0;
drivers/md/dm-raid.c-2287-
--
drivers/md/dm-raid.c=2849=static int rs_setup_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2906-
drivers/md/dm-raid.c:2907: mddev->reshape_backwards = 0; /* adding disk(s) -> forward reshape */
drivers/md/dm-raid.c-2908-
--
drivers/md/dm-raid.c-2911- r = rs_set_dev_and_array_sectors(rs, rs->ti->len, true);
drivers/md/dm-raid.c:2912: mddev->reshape_backwards = 1; /* removing disk(s) -> backward reshape */
drivers/md/dm-raid.c-2913-
--
drivers/md/dm-raid.c-2936- */
drivers/md/dm-raid.c:2937: mddev->reshape_backwards = rs->dev[0].rdev.data_offset ? 0 : 1;
drivers/md/dm-raid.c-2938- }
--
drivers/md/dm-raid.c-2943- */
drivers/md/dm-raid.c:2944: if (!mddev->reshape_backwards)
drivers/md/dm-raid.c-2945- rdev_for_each(rdev, &rs->md)
--
drivers/md/dm-raid.c=2957=static void rs_reset_inconclusive_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-2961- rs->md.delta_disks = 0;
drivers/md/dm-raid.c:2962: rs->md.reshape_backwards = 0;
drivers/md/dm-raid.c-2963- }
--
drivers/md/md-llbitmap.c=1538=static bool llbitmap_map_previous(struct llbitmap *llbitmap, sector_t offset,
--
drivers/md/md-llbitmap.c-1548-
drivers/md/md-llbitmap.c:1549: return mddev->reshape_backwards ? offset < boundary : offset >= boundary;
drivers/md/md-llbitmap.c-1550-}
--
drivers/md/md-llbitmap.c=1924=llbitmap_reshape_init_dst(struct llbitmap *llbitmap, unsigned long dst,
--
drivers/md/md-llbitmap.c-1929-
drivers/md/md-llbitmap.c:1930: if (!llbitmap->mddev->reshape_backwards)
drivers/md/md-llbitmap.c-1931- return bit_start < new->offset ? llbitmap_read(llbitmap, dst) :
--
drivers/md/md.c=740=int mddev_init(struct mddev *mddev)
--
drivers/md/md.c-789- mddev->reshape_position = MaxSector;
drivers/md/md.c:790: mddev->reshape_backwards = 0;
drivers/md/md.c-791- mddev->last_sync_action = ACTION_IDLE;
--
drivers/md/md.c=1176=int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
--
drivers/md/md.c-1189- else if (rdev->mddev->reshape_position != MaxSector &&
drivers/md/md.c:1190: (rdev->mddev->reshape_backwards ==
drivers/md/md.c-1191- (sector >= rdev->mddev->reshape_position)))
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1508- mddev->bitmap_info.default_space = 64*2 - (MD_SB_BYTES >> 9);
drivers/md/md.c:1509: mddev->reshape_backwards = 0;
drivers/md/md.c-1510-
--
drivers/md/md.c-1517- if (mddev->delta_disks < 0)
drivers/md/md.c:1518: mddev->reshape_backwards = 1;
drivers/md/md.c-1519- } else {
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2024- mddev->bitmap_info.default_space = (4096-1024) >> 9;
drivers/md/md.c:2025: mddev->reshape_backwards = 0;
drivers/md/md.c-2026-
--
drivers/md/md.c-2063- & MD_FEATURE_RESHAPE_BACKWARDS)))
drivers/md/md.c:2064: mddev->reshape_backwards = 1;
drivers/md/md.c-2065- } else {
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2271- if (mddev->delta_disks == 0 &&
drivers/md/md.c:2272: mddev->reshape_backwards)
drivers/md/md.c-2273- sb->feature_map
--
drivers/md/md.c=3405=static ssize_t new_offset_store(struct md_rdev *rdev,
--
drivers/md/md.c-3430- if (new_offset < rdev->data_offset &&
drivers/md/md.c:3431: mddev->reshape_backwards)
drivers/md/md.c-3432- return -EINVAL;
--
drivers/md/md.c-3437- if (new_offset > rdev->data_offset &&
drivers/md/md.c:3438: !mddev->reshape_backwards)
drivers/md/md.c-3439- return -EINVAL;
--
drivers/md/md.c-3446- if (new_offset > rdev->data_offset)
drivers/md/md.c:3447: mddev->reshape_backwards = 1;
drivers/md/md.c-3448- else if (new_offset < rdev->data_offset)
drivers/md/md.c:3449: mddev->reshape_backwards = 0;
drivers/md/md.c-3450-
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4140- mddev->delta_disks = 0;
drivers/md/md.c:4141: mddev->reshape_backwards = 0;
drivers/md/md.c-4142- put_pers(pers);
--
drivers/md/md.c-4161- mddev->delta_disks = 0;
drivers/md/md.c:4162: mddev->reshape_backwards = 0;
drivers/md/md.c-4163- mddev->degraded = 0;
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4449- mddev->raid_disks = n;
drivers/md/md.c:4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
drivers/md/md.c-4451- } else
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5739- mddev->delta_disks = 0;
drivers/md/md.c:5740: mddev->reshape_backwards = 0;
drivers/md/md.c-5741- mddev->new_level = mddev->level;
--
drivers/md/md.c=5757=reshape_direction_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-5759- return sprintf(page, "%s\n",
drivers/md/md.c:5760: mddev->reshape_backwards ? "backwards" : "forwards");
drivers/md/md.c-5761-}
--
drivers/md/md.c=5764=reshape_direction_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5774- return -EINVAL;
drivers/md/md.c:5775: if (mddev->reshape_backwards == backwards)
drivers/md/md.c-5776- return len;
--
drivers/md/md.c-5787- else
drivers/md/md.c:5788: mddev->reshape_backwards = backwards;
drivers/md/md.c-5789- mddev_unlock(mddev);
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7007- mddev->delta_disks = 0;
drivers/md/md.c:7008: mddev->reshape_backwards = 0;
drivers/md/md.c-7009- mddev->new_level = LEVEL_NONE;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7975- mddev->delta_disks = 0;
drivers/md/md.c:7976: mddev->reshape_backwards = 0;
drivers/md/md.c-7977-
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8061- if (mddev->delta_disks < 0)
drivers/md/md.c:8062: mddev->reshape_backwards = 1;
drivers/md/md.c-8063- else if (mddev->delta_disks > 0)
drivers/md/md.c:8064: mddev->reshape_backwards = 0;
drivers/md/md.c-8065-
--
drivers/md/md.c-8068- mddev->delta_disks = 0;
drivers/md/md.c:8069: mddev->reshape_backwards = 0;
drivers/md/md.c-8070- }
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-469- int new_chunk_sectors;
drivers/md/md.h:470: int reshape_backwards;
drivers/md/md.h-471-
--
drivers/md/raid10.c=658=static void raid10_find_phys(struct r10conf *conf, struct r10bio *r10bio)
--
drivers/md/raid10.c-663- ((r10bio->sector >= conf->reshape_progress) !=
drivers/md/raid10.c:664: conf->mddev->reshape_backwards)) {
drivers/md/raid10.c-665- set_bit(R10BIO_Previous, &r10bio->state);
--
drivers/md/raid10.c=1343=static bool raid10_write_request(struct mddev *mddev, struct bio *bio,
--
drivers/md/raid10.c-1365- if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
drivers/md/raid10.c:1366: (mddev->reshape_backwards
drivers/md/raid10.c-1367- ? (bio->bi_iter.bi_sector < conf->reshape_safe &&
--
drivers/md/raid10.c=3943=static int raid10_run(struct mddev *mddev)
--
drivers/md/raid10.c-3999- diff = (rdev->new_data_offset - rdev->data_offset);
drivers/md/raid10.c:4000: if (!mddev->reshape_backwards)
drivers/md/raid10.c-4001- diff = -diff;
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4390- - rdev->data_offset);
drivers/md/raid10.c:4391: if (!mddev->reshape_backwards)
drivers/md/raid10.c-4392- diff = -diff;
--
drivers/md/raid10.c-4424- smp_mb();
drivers/md/raid10.c:4425: if (mddev->reshape_backwards) {
drivers/md/raid10.c-4426- sector_t size = raid10_size(mddev, 0, 0);
--
drivers/md/raid10.c=4574=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-4628- /* If restarting in the middle, skip the initial sectors */
drivers/md/raid10.c:4629: if (mddev->reshape_backwards &&
drivers/md/raid10.c-4630- conf->reshape_progress < raid10_size(mddev, 0, 0)) {
--
drivers/md/raid10.c-4632- - conf->reshape_progress);
drivers/md/raid10.c:4633: } else if (!mddev->reshape_backwards &&
drivers/md/raid10.c-4634- conf->reshape_progress > 0)
--
drivers/md/raid10.c-4644- /* We don't use sector_nr to track where we are up to
drivers/md/raid10.c:4645: * as that doesn't work well for ->reshape_backwards.
drivers/md/raid10.c-4646- * So just use ->reshape_progress.
drivers/md/raid10.c-4647- */
drivers/md/raid10.c:4648: if (mddev->reshape_backwards) {
drivers/md/raid10.c-4649- /* 'next' is the earliest device address that we might
--
drivers/md/raid10.c-4705- mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c:4706: if (mddev->reshape_backwards)
drivers/md/raid10.c-4707- mddev->curr_resync_completed = raid10_size(mddev, 0, 0)
--
drivers/md/raid10.c-4845- */
drivers/md/raid10.c:4846: if (mddev->reshape_backwards)
drivers/md/raid10.c-4847- conf->reshape_progress -= sectors_done;
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5078- mddev->delta_disks = 0;
drivers/md/raid10.c:5079: mddev->reshape_backwards = 0;
drivers/md/raid10.c-5080-}
--
drivers/md/raid5.c=5889=static bool ahead_of_reshape(struct mddev *mddev, sector_t sector,
--
drivers/md/raid5.c-5891-{
drivers/md/raid5.c:5892: return mddev->reshape_backwards ? sector < reshape_sector :
drivers/md/raid5.c-5893- sector >= reshape_sector;
--
drivers/md/raid5.c=5896=static bool range_ahead_of_reshape(struct mddev *mddev, sector_t min,
--
drivers/md/raid5.c-5898-{
drivers/md/raid5.c:5899: return mddev->reshape_backwards ? max < reshape_sector :
drivers/md/raid5.c-5900- min >= reshape_sector;
--
drivers/md/raid5.c=6379=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
--
drivers/md/raid5.c-6406- /* If restarting in the middle, skip the initial sectors */
drivers/md/raid5.c:6407: if (mddev->reshape_backwards &&
drivers/md/raid5.c-6408- conf->reshape_progress < raid5_size(mddev, 0, 0)) {
--
drivers/md/raid5.c-6410- - conf->reshape_progress;
drivers/md/raid5.c:6411: } else if (mddev->reshape_backwards &&
drivers/md/raid5.c-6412- conf->reshape_progress == MaxSector) {
--
drivers/md/raid5.c-6414- sector_nr = MaxSector;
drivers/md/raid5.c:6415: } else if (!mddev->reshape_backwards &&
drivers/md/raid5.c-6416- conf->reshape_progress > 0)
--
drivers/md/raid5.c-6446- sector_div(safepos, data_disks);
drivers/md/raid5.c:6447: if (mddev->reshape_backwards) {
drivers/md/raid5.c-6448- if (WARN_ON(writepos < reshape_sectors))
--
drivers/md/raid5.c-6466- */
drivers/md/raid5.c:6467: if (mddev->reshape_backwards) {
drivers/md/raid5.c-6468- if (WARN_ON(conf->reshape_progress == 0))
--
drivers/md/raid5.c-6508-
drivers/md/raid5.c:6509: if ((mddev->reshape_backwards
drivers/md/raid5.c-6510- ? (safepos > writepos && readpos < writepos)
--
drivers/md/raid5.c-6527- mddev->curr_resync_completed = sector_nr;
drivers/md/raid5.c:6528: if (!mddev->reshape_backwards)
drivers/md/raid5.c-6529- /* Can update recovery_offset */
--
drivers/md/raid5.c-6584- spin_lock_irq(&conf->device_lock);
drivers/md/raid5.c:6585: if (mddev->reshape_backwards)
drivers/md/raid5.c-6586- conf->reshape_progress -= reshape_sectors * new_data_disks;
--
drivers/md/raid5.c-6643- mddev->curr_resync_completed = sector_nr;
drivers/md/raid5.c:6644: if (!mddev->reshape_backwards)
drivers/md/raid5.c-6645- /* Can update recovery_offset */
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8017- first = 0;
drivers/md/raid5.c:8018: } else if (mddev->reshape_backwards &&
drivers/md/raid5.c-8019- diff < min_offset_diff)
drivers/md/raid5.c-8020- min_offset_diff = diff;
drivers/md/raid5.c:8021: else if (!mddev->reshape_backwards &&
drivers/md/raid5.c-8022- diff > min_offset_diff)
--
drivers/md/raid5.c-8100- }
drivers/md/raid5.c:8101: } else if (mddev->reshape_backwards
drivers/md/raid5.c-8102- ? (here_new * chunk_sectors + min_offset_diff <=
--
drivers/md/raid5.c=8635=static int raid5_start_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8704- smp_mb();
drivers/md/raid5.c:8705: if (mddev->reshape_backwards)
drivers/md/raid5.c-8706- conf->reshape_progress = raid5_size(mddev, 0, 0);
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8843- mddev->delta_disks = 0;
drivers/md/raid5.c:8844: mddev->reshape_backwards = 0;
drivers/md/raid5.c-8845- }
]
|
| 285/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 48766
output: 37
thoughts: 395
Thoughts: **Analyzing Reshape Abort/Completion and `__md_stop` Behavior**
Okay, so I'm looking at this code and, right off the bat, I see a clear pattern: whenever a reshape operation is either aborted or successfully completed, the `delta_disks` member of the `mddev` structure gets reset to zero. Along with it, `reshape_backwards` is cleared, and `new_level`, `new_layout`, and `new_chunk_sectors` are all set back to their original values from `mddev`. Essentially, it's restoring the array to its pre-reshape state, which makes perfect sense.
Now, let's dive deeper and verify how this is actually implemented in the `__md_stop()` function within `drivers/md/md.c`. I need to be absolutely sure that the behavior I'm inferring is the actual implementation. Ah, here it is: `__md_stop()`. I see the detach logic, the bitmap destruction, the lock management, and the `pers` cleanupβall standard fare for stopping an MD array. And there it is, right near the end: the exact block of code I noted before, but within a conditional check. The conditional is `mddev->reshape_position == MaxSector`, which, if I recall correctly, implies the reshape is finished or hasn't started.
Just to be thorough, I should also quickly check the git log for `__md_stop()` and potentially related functions like `do_md_stop()`. I need to ensure there aren't any recent commits or subtle changes that might introduce some unintended side effects or edge cases. A quick history check never hurts, especially when dealing with critical array operations. I'll search the history for both functions and quickly review any relevant patches or comments. Gotta be certain I'm not missing anything that might have introduced a potential regression or hidden bug.
|
| 286/4 |
2026/09/09 20:44 |
tool |
git-log |
0m
Error:
Args: map[Count:5 PathPrefix:drivers/md/md.c SymbolName:__md_stop]
Results:
|
| 287/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 49624
output: 37
thoughts: 14
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing Code History with `git log`**
Okay, so I'm thinking about how to effectively analyze the code history, specifically when dealing with a symbol and its source path. `git log` seems like the obvious starting point here, given its comprehensive tracking capabilities. The core idea is to leverage the tool's flexibility to get a targeted view of changes related to a particular symbol. Instead of a broad overview, I'm aiming for precision. I want a history focused only on the specific instances I'm interested in. The key is to narrow the scope of `git log`. Combining `SymbolName` and `SourcePath` as search parameters seems like the right approach. This should allow me to pinpoint commits directly impacting the targeted code element. This should give me all the information that I need without needing a deep dive.
|
| 288/4 |
2026/09/09 20:44 |
tool |
git-log |
0m
Args: map[Count:5 SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results: map[Output:cefcb9297fbd md raid: fix hang when stopping arrays with metadata through dm-raid
10787568cc1f md: merge mddev serialize_policy into mddev_flags
26292657add3 md: check before referencing mddev->bitmap_ops
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
ca925302e841 md/md-bitmap: merge md_bitmap_flush() into bitmap_operations
]
|
| 289/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 50001
output: 24
thoughts: 16
Thoughts: Okay, here's my interpretation of that request, formatted as requested:
**Deconstructing Commit cefcb9297fbd**
Alright, time to dive into `cefcb9297fbd`. Let's see what that particular commit brought to the table. I'm especially interested in understanding the context, impact, and overall significance of this change. My initial thoughts are geared towards pinpointing the key modifications, identifying any potential refactoring, and assessing the implications on performance, maintainability, and the wider system architecture. I'll need to look closely at the diff, paying close attention to any subtle changes that might expose interesting and unexpected effects, or unexpected interactions within the code base. I also want to check for potential breaking changes. Finally, I'll consider how this commit fits into the bigger picture of recent developments and overall project trajectory. This analysis will guide my understanding of its role in the project.
|
| 290/4 |
2026/09/09 20:44 |
tool |
git-show |
0m
Args:
Results: map[Output:commit cefcb9297fbdb6d94b61787b4f8d84f55b741470
Author: Heinz Mauelshagen <heinzm@redhat.com>
Date: Wed Jan 14 18:52:21 2026 +0100
md raid: fix hang when stopping arrays with metadata through dm-raid
When using device-mapper's dm-raid target, stopping a RAID array can cause
the system to hang under specific conditions.
This occurs when:
- A dm-raid managed device tree is suspended from top to bottom
(the top-level RAID device is suspended first, followed by its
underlying metadata and data devices)
- The top-level RAID device is then removed
Removing the top-level device triggers a hang in the following sequence:
the dm-raid destructor calls md_stop(), which tries to flush the
write-intent bitmap by writing to the metadata sub-devices. However, these
devices are already suspended, making them unable to complete the write-intent
operations and causing an indefinite block.
Fix:
- Prevent bitmap flushing when md_stop() is called from dm-raid
destructor context
and avoid a quiescing/unquescing cycle which could also cause I/O
- Still allow write-intent bitmap flushing when called from dm-raid
suspend context
This ensures that RAID array teardown can complete successfully even when the
underlying devices are in a suspended state.
This second patch uses md_is_rdwr() to distinguish between suspend and
destructor paths as elaborated on above.
Link: https://lore.kernel.org/linux-raid/CAM23VxqYrwkhKEBeQrZeZwQudbiNey2_8B_SEOLqug=pXxaFrA@mail.gmail.com
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 606f616190d7..59cd303548de 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6851,13 +6851,15 @@ static void __md_stop_writes(struct mddev *mddev)
{
timer_delete_sync(&mddev->safemode_timer);
- if (mddev->pers && mddev->pers->quiesce) {
- mddev->pers->quiesce(mddev, 1);
- mddev->pers->quiesce(mddev, 0);
- }
+ if (md_is_rdwr(mddev) || !mddev_is_dm(mddev)) {
+ if (mddev->pers && mddev->pers->quiesce) {
+ mddev->pers->quiesce(mddev, 1);
+ mddev->pers->quiesce(mddev, 0);
+ }
- if (md_bitmap_enabled(mddev, true))
- mddev->bitmap_ops->flush(mddev);
+ if (md_bitmap_enabled(mddev, true))
+ mddev->bitmap_ops->flush(mddev);
+ }
if (md_is_rdwr(mddev) &&
((!mddev->in_sync && !mddev_is_clustered(mddev)) ||
]
|
| 291/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 51147
output: 30
thoughts: 808
Thoughts: **Analyzing the Implications of Reshape Operations During Array Shutdown**
Okay, let's break this down. I'm looking at the `__md_stop()` function and immediately I'm thinking about the edge case of an array that's stopped *during* a reshape operation. Specifically, what happens if `mddev->reshape_position` isn't equal to `MaxSector`?
My initial concern is this: if the array is stopped mid-reshape β let's say we're at sector 1000 β will crucial reshape metadata be lost? `__md_stop()` gets called, and because `reshape_position` isn't `MaxSector`, it *doesn't* clear `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, or `new_chunk_sectors`. Excellent!
This means when the array is later restarted using `md_run()`, the reshape can potentially continue from where it left off, which is the desired behavior. It's great that the reshape data is retained so that the reshape can continue. That makes sense. The code's behavior here seems correct.
However, I'm thinking about what happens if we're doing a *complete* teardown. When the array is completely disassembled (mode 0), `md_clean(mddev)` is called *after* `__md_stop()`. This is key. `md_clean()` explicitly resets `reshape_position`, `delta_disks`, etc. to their initial values. So, in that final stop scenario, everything *is* cleaned up, regardless of the reshape state. Nice.
What about when the array is inactive, like the state is `"inactive"` (mode 2)? The `pers` is destroyed, but the `mddev` structure *remains*. If `reshape_position` *is* equal to `MaxSector`, any in-memory reshape parameters that haven't actually been committed to the superblock get cleared. So, when the array gets restarted with state `"active"`, `raid5_run()` sees the *initial* state, as though there wasn't a reshape operation. That also makes perfect sense.
My quick mental check: if `reshape_position` is `MaxSector`, then the restart will see the level, layout, chunk size, and delta disks are all what the array *actually* is currently. So, no `BUG_ON()`'s should fire. Good.
Now, just to be thorough, I should scan the rest of `drivers/md/md.c` to make sure I haven't missed anything else that might interact with `reshape_position` and reshape in general. Let's do a quick search for `reshape_position` to make sure!
|
| 292/4 |
2026/09/09 20:44 |
tool |
grepper |
0m
Args: map[Expression:reshape_position PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=740=int mddev_init(struct mddev *mddev)
--
drivers/md/md.c-788- init_waitqueue_head(&mddev->recovery_wait);
drivers/md/md.c:789: mddev->reshape_position = MaxSector;
drivers/md/md.c-790- mddev->reshape_backwards = 0;
--
drivers/md/md.c=1176=int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
--
drivers/md/md.c-1188- bio.bi_iter.bi_sector = sector + rdev->sb_start;
drivers/md/md.c:1189: else if (rdev->mddev->reshape_position != MaxSector &&
drivers/md/md.c-1190- (rdev->mddev->reshape_backwards ==
drivers/md/md.c:1191: (sector >= rdev->mddev->reshape_position)))
drivers/md/md.c-1192- bio.bi_iter.bi_sector = sector + rdev->new_data_offset;
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1511- if (mddev->minor_version >= 91) {
drivers/md/md.c:1512: mddev->reshape_position = sb->reshape_position;
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
--
drivers/md/md.c-1519- } else {
drivers/md/md.c:1520: mddev->reshape_position = MaxSector;
drivers/md/md.c-1521- mddev->delta_disks = 0;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1648-
drivers/md/md.c:1649: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-1650- sb->minor_version = 90;
--
drivers/md/md.c-1652- sb->minor_version = 91;
drivers/md/md.c:1653: sb->reshape_position = mddev->reshape_position;
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
--
drivers/md/md.c-1684- /* we have nowhere to store the recovery_offset,
drivers/md/md.c:1685: * but if it is not below the reshape_position,
drivers/md/md.c-1686- * we can piggy-back on that.
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2054- if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c:2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
--
drivers/md/md.c-2065- } else {
drivers/md/md.c:2066: mddev->reshape_position = MaxSector;
drivers/md/md.c-2067- mddev->delta_disks = 0;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2263-
drivers/md/md.c:2264: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-2265- sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
drivers/md/md.c:2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/md.c=2753=static bool does_sb_need_changing(struct mddev *mddev)
--
drivers/md/md.c-2784- if ((mddev->dev_sectors != le64_to_cpu(sb->size)) ||
drivers/md/md.c:2785: (mddev->reshape_position != le64_to_cpu(sb->reshape_position)) ||
drivers/md/md.c-2786- (mddev->layout != le32_to_cpu(sb->layout)) ||
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4086- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
drivers/md/md.c:4087: mddev->reshape_position != MaxSector ||
drivers/md/md.c-4088- mddev->sysfs_active)
--
drivers/md/md.c=4357=layout_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4359- /* just a number, not meaningful for all levels */
drivers/md/md.c:4360: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4361- mddev->layout != mddev->new_layout)
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4392- mddev->new_layout = n;
drivers/md/md.c:4393: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4394- mddev->layout = n;
--
drivers/md/md.c=4403=raid_disks_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4406- return 0;
drivers/md/md.c:4407: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4408- mddev->delta_disks != 0)
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4433- err = update_raid_disks(mddev, n);
drivers/md/md.c:4434: } else if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-4435- struct md_rdev *rdev;
--
drivers/md/md.c=4470=chunk_size_show(struct mddev *mddev, char *page)
drivers/md/md.c-4471-{
drivers/md/md.c:4472: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4473- mddev->chunk_sectors != mddev->new_chunk_sectors)
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4505- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4506: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4507- mddev->chunk_sectors = n >> 9;
--
drivers/md/md.c=5066=static enum sync_action md_get_active_sync_action(struct mddev *mddev)
--
drivers/md/md.c-5073-
drivers/md/md.c:5074: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5075- return ACTION_RESHAPE;
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5248-
drivers/md/md.c:5249: if (mddev->reshape_position == MaxSector ||
drivers/md/md.c-5250- mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=5710=static ssize_t
drivers/md/md.c:5711:reshape_position_show(struct mddev *mddev, char *page)
drivers/md/md.c-5712-{
drivers/md/md.c:5713: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5714- return sprintf(page, "%llu\n",
drivers/md/md.c:5715: (unsigned long long)mddev->reshape_position);
drivers/md/md.c-5716- strcpy(page, "none\n");
--
drivers/md/md.c=5720=static ssize_t
drivers/md/md.c:5721:reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-5722-{
--
drivers/md/md.c-5737- goto unlock;
drivers/md/md.c:5738: mddev->reshape_position = new;
drivers/md/md.c-5739- mddev->delta_disks = 0;
--
drivers/md/md.c-5751-
drivers/md/md.c:5752:static struct md_sysfs_entry md_reshape_position =
drivers/md/md.c:5753:__ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show,
drivers/md/md.c:5754: reshape_position_store);
drivers/md/md.c-5755-
--
drivers/md/md.c=6063=static struct attribute *md_default_attrs[] = {
--
drivers/md/md.c-6076- &md_array_state.attr,
drivers/md/md.c:6077: &md_reshape_position.attr,
drivers/md/md.c-6078- &md_reshape_direction.attr,
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6735-
drivers/md/md.c:6736: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-6737- pers->start_reshape == NULL) {
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-6975- mddev->resync_max = MaxSector;
drivers/md/md.c:6976: mddev->reshape_position = MaxSector;
drivers/md/md.c-6977- /* we still need mddev->external in export_rdev, do not clear it yet */
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7964-
drivers/md/md.c:7965: mddev->reshape_position = MaxSector;
drivers/md/md.c-7966-
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8047- test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
drivers/md/md.c:8048: mddev->reshape_position != MaxSector)
drivers/md/md.c-8049- return -EBUSY;
--
drivers/md/md.c=8842=static int status_resync(struct seq_file *seq, struct mddev *mddev)
--
drivers/md/md.c-8887- }
drivers/md/md.c:8888: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-8889- seq_printf(seq, "\treshape=REMOTE");
--
drivers/md/md.c=9395=struct bio *mddev_bio_split_at_reshape_offset(struct mddev *mddev,
--
drivers/md/md.c-9411-
drivers/md/md.c:9412: boundary = READ_ONCE(mddev->reshape_position);
drivers/md/md.c-9413- start = bio->bi_iter.bi_sector;
--
drivers/md/md.c=9610=static sector_t md_sync_position(struct mddev *mddev, enum sync_action action)
--
drivers/md/md.c-9629- if (mddev_is_clustered(mddev) &&
drivers/md/md.c:9630: mddev->reshape_position != MaxSector)
drivers/md/md.c:9631: return mddev->reshape_position;
drivers/md/md.c-9632- return 0;
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10211- /* Check if reshape is in progress first. */
drivers/md/md.c:10212: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-10213- if (mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10267- */
drivers/md/md.c:10268: if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10269- md_spares_need_change(mddev)) {
--
drivers/md/md.c-10280- */
drivers/md/md.c:10281: if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10282- md_spares_need_change(mddev)) {
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10886- * reshape is happening in the remote node, we need to
drivers/md/md.c:10887: * update reshape_position and call start_reshape.
drivers/md/md.c-10888- */
drivers/md/md.c:10889: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-10890- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.c-10894- } else if (test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) &&
drivers/md/md.c:10895: mddev->reshape_position != MaxSector &&
drivers/md/md.c-10896- !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c-10897- /* reshape is just done in another node. */
drivers/md/md.c:10898: mddev->reshape_position = MaxSector;
drivers/md/md.c-10899- if (mddev->pers->update_reshape_pos)
]
|
| 293/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 57009
output: 202
thoughts: 678
Thoughts: **Reshape Parameter Reset in `__md_stop` - A Direct Fix**
Okay, so the invariant `mddev->reshape_position == MaxSector` is definitely the key β it signifies that no reshape operation is currently underway. I've confirmed that `__md_stop(mddev)` always gets called when the array is being halted, either for deactivation or disassembly. Consequently, if that reshape position is at `MaxSector`, it means the reshape parameters we've been tracking β `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` β were meant for a reshape that never actually initiated.
The implications are clear: when an array stops and a reshape wasn't started, those pending parameters are just lingering, potentially causing issues down the line. We need to explicitly reset them to their default, inactive states. Since the reshape never ran, the initial values would be as good as any for setting things up for the next time we start the array.
My immediate thought is to modify the `__md_stop` function in `drivers/md/md.c` to handle this. Let's take a look at the code: lines 7084-7098 (or whatever the line numbers are in the latest kernel version) - they cover the current cleanup. Right after the existing logic within `__md_stop`, I'm going to add a check for `mddev->reshape_position == MaxSector`. If that's true, then and only then, I will reset the reshape parameters. The addition is pretty straightforward:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
This should be a clean, targeted fix. Let's get `codeeditor` to apply this change directly to the file and see if that resolves the issue, I believe the logic is sound.
|
| 294/4 |
2026/09/09 20:44 |
tool |
codeeditor |
0m
Args: map[CurrentCode: mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
} NewCode: mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
} SourceFile:drivers/md/md.c]
Results:
|
| 295/4 |
2026/09/09 20:44 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 58376
output: 10
thoughts: 13
Thoughts: Okay, here's my attempt at summarizing the thought process, as requested, in the first person and assuming an expert audience:
**Verifying Changes with `patch-diff`**
Alright, I've made some changes β let's verify these using `patch-diff`. I'm confident in the modifications, but it's crucial to have that extra layer of validation, especially in a production environment. I want to ensure everything integrates cleanly and that I haven't introduced any unexpected side effects. Running a diff against the original should quickly highlight any deviations and confirm that what I intended to change, is indeed what I've changed. This is standard practice, but even for an expert, always crucial. No point having that "gotcha" moment during integration testing. Let's make sure this is smooth.
|
| 296/4 |
2026/09/09 20:45 |
tool |
patch-diff |
0m
Error:
|
| 297/4 |
2026/09/09 20:45 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 58587
output: 22
thoughts: 27
Thoughts: Okay, here's my summary, presented as a stream of thought:
**Patching a Specific File**
Alright, I'm thinking about how to apply this patch. The question is, how do I target a specific file? I could just give `patch-diff` the full diff, but that's not ideal if I only want to modify one file, or keep the process clean and targeted. So, I need to provide it with the path to the file that the patch applies to.
I'm considering the format of this file specification. Should it be `"File: "` or perhaps a more explicit `"File: drivers/md/md.c"` format? The first feels a little too generic, so I should probably provide the full path to avoid any ambiguity, and make the process more resilient to variations in the patch itself. Ultimately, I want the patching process to be as precise and efficient as possible. Therefore, specifying something like "File: drivers/md/md.c" feels like the right approach, to give `patch-diff` the exact context it needs to correctly apply the changes to the correct location.
|
| 298/4 |
2026/09/09 20:45 |
tool |
patch-diff |
0m
Args: map[File:drivers/md/md.c]
Results: map[Output:diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7084,24 +7084,32 @@ static void mddev_detach(struct mddev *mddev)
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
{
lockdep_assert_held(&mddev->reconfig_mutex);
/* stop the array and free an attached data structures.
* This is called from dm-raid
*/
__md_stop_writes(mddev);
]
|
| 299/4 |
2026/09/09 20:45 |
llm |
patch-generator |
0m
Model:
Tokens:
input: 59325
output: 738
thoughts: 481
Thoughts: **My Analysis of the Proposed Fix**
Okay, this diff is clean, which is always a good start. Let's break down the issue and the solution systematically. It looks like we're dealing with a race condition involving array reshaping. The core problem is that if an array is stopped prematurely, *before* a requested reshape has actually started, some crucial reshape parameters are left hanging around in the `mddev` struct. Specifically, `delta_disks`, `reshape_backwards`, `new_layout`, etc., which are usually updated via sysfs attributes like `raid_disks_store`.
The bug manifests when the array is deactivated and enters an inactive state via `do_md_stop()`. This can happen before `mddev->reshape_position` progresses from `MaxSector`. The key here is that `__md_stop()` detaches the personality and frees private structures, but it *doesn't* reset those pending reshape parameters in certain circumstances.
Then, upon a subsequent restart (using `md_run()`), the personality's run method (e.g., `raid5_run()`) is invoked. Since `mddev->reshape_position` is still equal to `MaxSector`, it goes down the non-reshape path, but there is a series of `BUG_ON` checks:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
Since `delta_disks` was left set due to the premature stop, the final check triggers the kernel BUG.
The fix, as I understand it, is to reset `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` within `__md_stop()`, *but only* if `mddev->reshape_position == MaxSector`. This is the critical piece. If a reshape *was* underway (`reshape_position != MaxSector`), we *don't* reset the parameters, as this would break the reshape! This makes perfect sense; those parameters are preserved so the reshape can resume.
The code adheres to existing patterns established in `super_1_validate()`, `super_90_validate()`, and `reshape_position_store()`, so there is consistency in the overall codebase. Finally, and very importantly, the analysis mentions thread safety and locking. Since `__md_stop()` is always invoked with `mddev->reconfig_mutex` held and after all sync threads and writes are stopped, this change is guaranteed to be race-free, which is crucial.
Given all of this, the fix appears sound, well-reasoned, and appropriately addresses the described race condition. I'm satisfied with the assessment.
|
| 300/3 |
2026/09/09 20:45 |
action |
test-patch |
30m
Results: map[PatchDiff:diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
TestError:]
|
| 301/3 |
2026/09/09 21:15 |
action |
If |
4m
Args:
|
| 302/4 |
2026/09/09 21:15 |
agent |
patch-reviewer |
4m
Model:
Results: map[ReviewApproved:true ReviewComments:[]]
Instruction: You are an experienced Linux kernel maintainer reviewing a proposed patch that compiles and passes reproducer tests.
Evaluate the patch diff against the crash report, root cause, and the architectural design guidelines below.
Scope Constraint (Single-Patch Submissions):
We only generate single, standalone patches (not patch series). If a comprehensive architectural redesign would require a multi-patch series touching many files, accept a localized single-patch fix as long as it correctly fixes the bug, does not introduce new issues, and avoids sentinel band-aids within its local scope.
Evaluation:
- Set ReviewApproved=true (and leave ReviewComments empty) if the patch is acceptable for upstream submission as a single-patch fix.
- Set ReviewApproved=false and list concise, actionable feedback in ReviewComments if the patch contains fixable "Kernel Architectural Design & Maintainer Taste" violations.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
---
# Kernel Architectural Design & Maintainer Taste
Evaluate kernel patches and fix proposals beyond binary bug presence. Enforce **maintainer taste**, **lifecycle symmetry**, **typestate soundness**, and **topological graph simplicity**.
---
## 1. Core Philosophy: Band-Aid vs. Architectural Design
Naive patches often introduce **defensive sentinel guards** (e.g., ad-hoc `if (!ptr) return;` checks, status flags, or suppressed warnings) directly at the point of failure. While locally avoiding crashes, they degrade subsystem architecture by leaving uninitialized states reachable.
Maintainer "good taste" solves the root cause by **shifting invariants** (making invalid states unrepresentable) and moving dynamic runtime checks into static typestate guarantees.
```
HACKY BAND-AID FIX (Monolithic Cleanup) ARCHITECTURAL DESIGN (Scoped RAII / Invariant Shift)
βββββββββββββββββββββββββββββββββββββββ ββββββββββββββββββββββββββββββββββββββββββββββββββββ
[ Init / Entry ] [ Init / Entry ]
β β
(Register Global Cleanup) (Allocate Resource A)
β β
[ Init Sub-B ] ββfailβββ [ Init Sub-B ] ββfailβββ
β (success) β β (success) β
βΌ β βΌ βΌ
[ Setup Complete ] β (Arm B Cleanup / RAII) (Unwind A Only:
β β β B never armed)
(Deferred Teardown) β βΌ β
β β [ Setup Complete ] βΌ
βΌ βΌ β [ Error Exit ]
[ release_all ] βββββββββ (LIFO Scope Teardown)
β β
(if (!ctx->b) return;) <-- Defensive guard! βΌ
β [ Clean Destruction ]
[ Unsafe State ] (Zero sentinel checks needed)
```
```c
// ANTI-PATTERN (Defensive Sentinel Guard): Teardown called on partial init -> callee needs guard
void driver_cleanup(struct ctx *ctx) {
if (!ctx->buf) return; // <-- Sentinel band-aid
free_buffer(ctx->buf);
}
// CANONICAL SHIFT (Granular Scoped Action): Registered only upon complete initialization
ctx->buf = alloc_buffer();
if (!ctx->buf) return -ENOMEM;
devm_add_action_or_reset(dev, free_buffer_action, ctx->buf);
```
---
## 2. Maintainer Taste as Graph Topology & Structural Simplicity
Software design quality maps directly to graph-theoretic properties across the Control-Flow Graph (CFG), Data-Flow Graph (DFG), and Object Lifecycle DAG:
### A. Control-Flow Graph (CFG) Simplification
* **Branch Minimization & Path Explosion (McCabe 1976):** Every defensive check added to a compound destructor or callback (`if (!ctx->buffer) return;`) adds a predicate node ($\pi$), increases cyclomatic complexity $v(G) = |E| - |V| + 2$, causes exponential path explosion ($O(2^k)$ paths), and enlarges explicit state spaces ($|S| = \prod |D_i|$). Good taste eliminates the branch by guaranteeing destructors are invoked only on initialized typestates. *(Note: Standard idempotent leaf deallocators like `kfree(NULL)` and public API input sanitizers are exempt).*
* **Single-Entry Single-Exit (SESE) Symmetry (Ferrante 1987, Johnson 1994, Dijkstra 1972):** Resource acquisition and release must form strict **nested dominator trees**. If resource $R_i$ is acquired at node $A$, the set of release actions $\{B_1, \dots, B_m\}$ must form a strict **post-dominating cut** relative to $A$ across all maximal exit paths.
* **Pointer Uniformity (Linus's "Good Taste" Rule):** Eliminate special-case conditional branches by operating on address indirection (e.g., indirect pointers `**curr` in linked list unlinking) to unify edge and interior cases into a branchless invariant.
* **Lexical Scope Invariants & Affine Lifecycles (Wadler 1990, RAII):** Enforce SESE symmetry and "consumed exactly once" affine invariants using compiler-backed scoped cleanup (`<linux/cleanup.h>` `guard()`, `scoped_guard()`, `__free()`).
### B. Ownership & Lifetime DAGs
* **Acyclic Lifecycles & Topological Teardown (Tarjan 1972, Kahn 1962):** Resource ownership must form a strict Directed Acyclic Graph (DAG) $G = (R, E)$. Teardown order must strictly follow reverse topological sort $\text{toposort}(G)^R$. Mixing conflicting lifetime paradigms (e.g., embedding a dynamic refcounted `kref`/socket struct inside a device-managed `devres` buffer or parent container) violates DAG acyclicity, creating synchronous blocking hacks (`wait_for_completion`), circular pins, and Use-After-Free hazards.
* **Three-Phase Concurrent Quiescence:** Multi-threaded and asynchronous teardown (networking, block layer, RCU) must strictly sequence: (1) **Deactivation/Delisting** (make unreachable) -> (2) **Quiescence & Draining** (`synchronize_rcu()`, `cancel_work_sync()`, `napi_disable()`) -> (3) **Physical Reclamation** (`kfree()`, `kmem_cache_destroy()`).
* **Typestate Validity (Strom & Yemini 1986, Aldrich et al. 2009):** A struct with $N$ fields should not use runtime boolean flags (`ctx->is_initialized`) to model incomplete typestates. Sub-resources must transition as a deterministic typestate automaton ($S_{uninit} \xrightarrow{\text{alloc}} S_{init} \xrightarrow{\text{publish}} S_{registered}$), and registration functions must accept only fully initialized typestates.
---
## 3. Deterministic Decision Trigger Matrix
| Code Symptom / Trigger (When you see X) | Anti-Pattern Band-Aid (DO NOT DO Z) | Canonical Invariant Shift (DO Y) |
| :--- | :--- | :--- |
| **Null deref in compound destructor / cleanup callback** | Add `if (!priv->buf) return;` in composite cleanup handler | Register granular cleanup immediately upon allocation via `devm_add_action_or_reset()`, `<linux/cleanup.h>` `__free()`, or discrete reverse LIFO labels |
| **UAF on dynamic object after container unbind** | Allocate with `devm_kzalloc()` and block on `wait_for_completion()` | Allocate with `kzalloc()`, manage lifetime via `kref_get()`/`kref_put()`, call unbind/delist on unbind, free in `kref` release callback |
| **Goto ladder lock leaks on early error exit** | Sprinkle manual `mutex_unlock()` across error returns | Use `guard(mutex)(&lock)` or `scoped_guard(spinlock, &lock)` from `<linux/cleanup.h>` |
| **Callback / IRQ / timer fires before full init** | Add `if (!priv->ready)` check inside IRQ/timer handler | Move `request_irq()`, `timer_setup()`, or `napi_enable()` strictly to the end of setup after all state structures are fully initialized |
| **Multi-step setup failure leaks resources** | Route all errors to a single `err:` label calling a monolithic `cleanup(priv)` with NULL checks | Use `cleanup.h` RAII, granular `devm` actions, or a strict reverse LIFO goto ladder (`err_free_b:` -> `err_free_a:`) |
| **Mixed ownership / asymmetric refcount drops** | Conditionally call `kref_put()` in caller based on error code | Enforce unconditional callee-cleans or caller-cleans ownership convention across all paths |
| **Ad-hoc state flag polling during teardown** | Add `priv->stopping = true` and spin/poll in callbacks | Use atomic typestate transitions and synchronous flush/drain APIs (`cancel_work_sync()`, `drain_workqueue()`) |
---
## 4. The Architectural Review Checklist
Before finalizing any kernel fix or review, audit against the following four criteria:
1. **The Sentinel Test (Caller vs. Callee Responsibility):**
* *Smell:* Adding a defensive guard (`if (!ptr)` or `if (flags & INITIALIZED)`) inside a compound teardown callback or destructor to mask partial initialization.
* *Invariant:* If a destructor executes on uninitialized data, the defect is at the **caller's registration/invocation point**, not the callee.
* *Note:* Standard C allocator no-ops (`kfree(NULL)`) and public API parameter validators (`if (WARN_ON(!ptr)) return -EINVAL;`) are exempt; this rule targets *internal subsystem lifecycle pipelines and teardown paths*.
* *Action:* Move registration to the point of complete initialization (`devm_add_action_or_reset()`, RAII/`__free()`, or discrete caller unwinding).
2. **LIFO Stack Unwinding Symmetry:**
* *Smell:* Releasing resources in arbitrary order or invoking destructors for partially initialized subsystems.
* *Invariant:* Resource release must strictly mirror acquisition order in reverse (LIFO) without monolithic cleanup guards.
* *Action:* Verify that partial setup/initialization failures (e.g., `probe()`, `mount()`, `open()`, `alloc_pool()`) unwind only already-allocated resources in reverse order via strict LIFO labels or `cleanup.h` scope exit.
3. **Ownership Decoupling:**
* *Smell:* Embedding dynamically refcounted objects (`kref`, `struct sock`, `struct inode`, `struct file`) directly inside hardware device-bound allocations (`devres`) or parent containers (`super_block`, `net_device`).
* *Invariant:* Dynamic consumer references must outlive parent unregistration without use-after-free, circular pins, or blocking hacks.
* *Action:* Decouple the refcounted core object from the container binding; container teardown must unbind/delist the object, but memory is freed exclusively by the final `kref_put()`.
4. **Codebase Idiom Alignment:**
* *Smell:* Using legacy custom rollback ladders, ad-hoc state flags, or manual lock unlocking on error paths.
* *Invariant:* Prefer standard, modern kernel abstractions with compiler-enforced safety guarantees.
* *Action (Modern >= 6.6):* Replace manual boilerplate with `cleanup.h` (`guard()`, `scoped_guard()`, `__free()`), `devm_add_action_or_reset()`, `refcount_t`, and standard `kref` helpers.
* *Action (Legacy / LTS / No-RAII Subsystems):* Enforce clean, branchless reverse LIFO goto ladders (`err_free_b:` -> `err_free_a:`).
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
Bug title:
kernel BUG in raid5_run
The crash report:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The root cause explanation:
An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
The proposed patch diff:
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
Review this patch diff against the crash report, root cause explanation, and kernel architectural design guidelines.
|
| 303/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 10552
output: 37
thoughts: 109
Thoughts: **Kernel Patch Review - Initial Assessment**
Okay, so I've got a Linux kernel patch up for review. Let's dive right in. The most critical thing is understanding the context, and that means starting with a solid grasp of the crash report and the proposed solution's root cause analysis. Then, naturally, I'll need to dissect the patch diff itself.
My initial focus will be on the code around `raid5.c:8117`. I need to understand what's happening there, any potential interactions with other parts of the RAID subsystem. Furthermore, I need to look closely at `drivers/md/md.c`, specifically around the `__md_stop`, `md_stop`, and `md_clean` functions. These are critical for understanding how the RAID device is managed and brought down, and I need to assess how the patch interacts with this shutdown process.
For this analysis, I'll be using my standard toolset β `read-file`, `codesearch-definition-source`, and likely a good old `grepper` session. I need to be able to quickly navigate the code, understand function definitions, and trace the flow of execution. I'm looking for any potential race conditions, lock contention issues, or unexpected side effects that the patch might introduce. I need to make sure this proposed change doesn't introduce a regression or exacerbate an existing problem. Let's get to work!
|
| 304/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8105 LineCount:35]
Results: map[Contents:8105: here_old * chunk_sectors + (-min_offset_diff))) {
8106: /* Reading from the same stripe as writing to - bad */
8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
8108: mdname(mddev));
8109: return -EINVAL;
8110: }
8111: pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
8112: /* OK, we should be able to continue; */
8113: } else {
8114: BUG_ON(mddev->level != mddev->new_level);
8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
8120: if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
8121: test_bit(MD_HAS_PPL, &mddev->flags)) {
8122: pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
8123: mdname(mddev));
8124: clear_bit(MD_HAS_PPL, &mddev->flags);
8125: clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
8126: }
8127:
8128: if (mddev->private == NULL)
8129: conf = setup_conf(mddev);
8130: else
8131: conf = mddev->private;
8132:
8133: if (IS_ERR(conf))
8134: return PTR_ERR(conf);
8135:
8136: if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
8137: if (!journal_dev) {
8138: pr_warn("md/raid:%s: journal disk is missing, force array readonly\n",
8139: mdname(mddev));
]
|
| 305/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 11629
output: 36
thoughts: 48
Thoughts: Okay, let's dive into this.
**Investigating the MD Driver Shutdown Sequence**
Alright, I need to get a handle on how this RAID array is brought down cleanly, so let's start by digging into `drivers/md/md.c`. Specifically, I'm going to focus on the shutdown sequence β the functions responsible for gracefully stopping the array and ensuring data integrity. I need to understand the relationships and execution order of `__md_stop`, `md_stop`, `md_clean`, `do_md_stop`, and `update_raid_disks`, and how they fit together to handle the overall shutdown process. A comprehensive understanding of this is crucial to the overall functioning of this driver.
|
| 306/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7080 LineCount:50]
Results: map[Contents:7080: if (!mddev_is_dm(mddev))
7081: blk_sync_queue(mddev->gendisk->queue);
7082: }
7083:
7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
7110:
7111: EXPORT_SYMBOL_GPL(md_stop);
7112:
7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
7115: {
7116: int err = 0;
7117: int did_freeze = 0;
7118:
7119: if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
7120: return -EBUSY;
7121:
7122: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7123: did_freeze = 1;
7124: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7125: }
7126:
7127: stop_sync_thread(mddev, false);
7128: wait_event(mddev->sb_wait,
7129: !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
]
|
| 307/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 12629
output: 36
thoughts: 35
Thoughts: Okay, let's dive into this code.
**Investigating the Markdown Processing Halt**
Alright, I need to understand the control flow surrounding the markdown processing termination. My primary focus is on `__md_stop`. I need to figure out exactly where this function is invoked within the code. Then, I should trace its usage to understand its impact on the system's markdown execution.
Beyond that, I should dig deeper. I'll need to explore related functions as well. I need to understand what `do_md_stop` actually *does*. Also, `md_clean`, and other related routines β I'll look into them too. The goal is a comprehensive understanding of how the markdown processing lifecycle is managed, especially the mechanism for halting it. I want to build a complete mental model of this part of the system.
|
| 308/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7160 LineCount:80]
Results: map[Contents:7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
7232:
7233: #ifndef MODULE
7234: static void autorun_array(struct mddev *mddev)
7235: {
7236: struct md_rdev *rdev;
7237: int err;
7238:
7239: if (list_empty(&mddev->disks))
]
|
| 309/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 14087
output: 36
thoughts: 15
Thoughts: Okay, let's dive into this. Here's my take on those thoughts, as if they're my own:
**Investigating the `md_clean(mddev)` Function**
Alright, time to get my hands dirty. I'm taking a look at `md_clean(mddev)`. Clearly, it's a function designed to perform some kind of cleanup operation on an MD device. Given the context of MD RAID, it's probably related to ensuring data integrity or recovering from errors within the array. It could involve resynchronization, marking bad blocks, scrubbing the data, or perhaps even something more specific to the particular MD setup. I need to understand exactly what that cleanup entails. Is it a destructive operation? How does it interact with the underlying disks? What triggers it? Knowing the answers to these questions is crucial to understanding how the storage system is behaving and to be sure it's running optimally. Let's see what the code reveals!
|
| 310/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7015 LineCount:40]
Results: map[Contents:7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
7031:
7032: static void __md_stop_writes(struct mddev *mddev)
7033: {
7034: timer_delete_sync(&mddev->safemode_timer);
7035:
7036: if (md_is_rdwr(mddev) || !mddev_is_dm(mddev)) {
7037: if (mddev->pers && mddev->pers->quiesce) {
7038: mddev->pers->quiesce(mddev, 1);
7039: mddev->pers->quiesce(mddev, 0);
7040: }
7041:
7042: if (md_bitmap_enabled(mddev, true))
7043: mddev->bitmap_ops->flush(mddev);
7044: }
7045:
7046: if (md_is_rdwr(mddev) &&
7047: ((!mddev->in_sync && !mddev_is_clustered(mddev)) ||
7048: mddev->sb_flags)) {
7049: /* mark array as shutdown cleanly */
7050: if (!mddev_is_clustered(mddev))
7051: mddev->in_sync = 1;
7052: md_update_sb(mddev, 1);
7053: }
7054: /* disable policy to guarantee rdevs free resources for serialization */
]
|
| 311/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 15044
output: 36
thoughts: 12
Thoughts: Okay, here's my interpretation of "Let's see the rest of `md_clean`", rendered as a first-person expert summary.
**Examining the Core of `md_clean`**
Right, let's dive in. "Let's see the rest of `md_clean`" is a clear directive, a sign that I'm now tasked with a deeper examination of this `md_clean` function or process. My initial thought is, "Okay, what haven't I reviewed yet?" This implies I've already scrutinized at least some portion of it. Perhaps I've looked at the input, the initial operations, or specific modules it calls. Now, I'm ready for the next level of understanding. This phrase suggests a willingness to invest time, to unpack the remaining components, and to fully grasp the function's overall mechanics. I want to see if there are any subtle bugs, inefficiencies, or opportunities for optimization within the remaining code. I am eager to understand the bigger picture.
|
| 312/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6980 LineCount:40]
Results: map[Contents:6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
]
|
| 313/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 16065
output: 26
thoughts: 181
Thoughts: **Investigating the Array Reshape Process in `md_clean()`**
Okay, so I'm diving into the `md_clean()` function, specifically lines 7007-7011. Interesting. I see the reset of several key reshape parameters: `mddev->delta_disks`, `mddev->reshape_backwards`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors`. The one that immediately catches my eye is `mddev->new_level` being explicitly set to `LEVEL_NONE`. This seems like a crucial step in cleaning up after a reshape operation.
But a question sparks: Where is `new_level` actually *initialized* when a new array is first created? I need to understand its starting state. Is it `LEVEL_NONE` by default, or is there a different initial value that needs to be considered? This could be critical for understanding reshape logic.
To get a clearer picture, I'm going to look deeper. I'll need to go through `md_run` to see how these variables are initially set. I'll also expand my search to other relevant areas of the code base where `new_level`, `delta_disks`, and the other reshape-related parameters are either set or checked. A good `grep` session is in order to comprehensively map their usage and understand the lifecycle of these variables throughout the array configuration and reshape processes. This will give me a proper handle on this code block.
|
| 314/5 |
2026/09/09 21:15 |
tool |
grepper |
0m
Args: map[Expression:new_level PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-cache-policy-smq.c=482=static void q_requeue(struct queue *q, struct entry *e, unsigned int extra_levels,
--
drivers/md/dm-cache-policy-smq.c-486- unsigned int sentinels_passed = 0;
drivers/md/dm-cache-policy-smq.c:487: unsigned int new_level = min(q->nr_levels - 1u, e->level + extra_levels);
drivers/md/dm-cache-policy-smq.c-488-
--
drivers/md/dm-cache-policy-smq.c-490- if (extra_levels && (e->level < q->nr_levels - 1u)) {
drivers/md/dm-cache-policy-smq.c:491: for (de = l_head(q->es, q->qs + new_level); de && de->sentinel; de = l_next(q->es, de))
drivers/md/dm-cache-policy-smq.c-492- sentinels_passed++;
--
drivers/md/dm-cache-policy-smq.c-515- q_del(q, e);
drivers/md/dm-cache-policy-smq.c:516: e->level = new_level;
drivers/md/dm-cache-policy-smq.c-517- q_push(q, e);
--
drivers/md/dm-raid.c=224=struct rs_layout {
drivers/md/dm-raid.c:225: int new_level;
drivers/md/dm-raid.c-226- int new_layout;
--
drivers/md/dm-raid.c=261=static void rs_config_backup(struct raid_set *rs, struct rs_layout *l)
--
drivers/md/dm-raid.c-264-
drivers/md/dm-raid.c:265: l->new_level = mddev->new_level;
drivers/md/dm-raid.c-266- l->new_layout = mddev->new_layout;
--
drivers/md/dm-raid.c=270=static void rs_config_restore(struct raid_set *rs, struct rs_layout *l)
--
drivers/md/dm-raid.c-273-
drivers/md/dm-raid.c:274: mddev->new_level = l->new_level;
drivers/md/dm-raid.c-275- mddev->new_layout = l->new_layout;
--
drivers/md/dm-raid.c=712=static void rs_set_cur(struct raid_set *rs)
--
drivers/md/dm-raid.c-715-
drivers/md/dm-raid.c:716: mddev->new_level = mddev->level;
drivers/md/dm-raid.c-717- mddev->new_layout = mddev->layout;
--
drivers/md/dm-raid.c=725=static void rs_set_new(struct raid_set *rs)
--
drivers/md/dm-raid.c-728-
drivers/md/dm-raid.c:729: mddev->level = mddev->new_level;
drivers/md/dm-raid.c-730- mddev->layout = mddev->new_layout;
--
drivers/md/dm-raid.c=736=static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type,
--
drivers/md/dm-raid.c-766- rs->md.level = raid_type->level;
drivers/md/dm-raid.c:767: rs->md.new_level = rs->md.level;
drivers/md/dm-raid.c-768- rs->md.layout = raid_type->algorithm;
--
drivers/md/dm-raid.c=1743=static int rs_check_takeover(struct raid_set *rs)
--
drivers/md/dm-raid.c-1760- /* raid0 -> raid1/5 with one disk */
drivers/md/dm-raid.c:1761: if ((mddev->new_level == 1 || mddev->new_level == 5) &&
drivers/md/dm-raid.c-1762- mddev->raid_disks == 1)
--
drivers/md/dm-raid.c-1765- /* raid0 -> raid10 */
drivers/md/dm-raid.c:1766: if (mddev->new_level == 10 &&
drivers/md/dm-raid.c-1767- !(rs->raid_disks % mddev->raid_disks))
--
drivers/md/dm-raid.c-1770- /* raid0 with multiple disks -> raid4/5/6 */
drivers/md/dm-raid.c:1771: if (__within_range(mddev->new_level, 4, 6) &&
drivers/md/dm-raid.c-1772- mddev->new_layout == ALGORITHM_PARITY_N &&
--
drivers/md/dm-raid.c-1785- /* raid10* -> raid0 */
drivers/md/dm-raid.c:1786: if (mddev->new_level == 0) {
drivers/md/dm-raid.c-1787- /* Can takeover raid10_near with raid disks divisable by data copies! */
--
drivers/md/dm-raid.c-1803- /* raid10_{near,far} -> raid1 */
drivers/md/dm-raid.c:1804: if (mddev->new_level == 1 &&
drivers/md/dm-raid.c-1805- max(near_copies, __raid10_far_copies(mddev->layout)) == mddev->raid_disks)
--
drivers/md/dm-raid.c-1808- /* raid10_{near,far} with 2 disks -> raid4/5 */
drivers/md/dm-raid.c:1809: if (__within_range(mddev->new_level, 4, 5) &&
drivers/md/dm-raid.c-1810- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1815- /* raid1 with 2 disks -> raid4/5 */
drivers/md/dm-raid.c:1816: if (__within_range(mddev->new_level, 4, 5) &&
drivers/md/dm-raid.c-1817- mddev->raid_disks == 2) {
--
drivers/md/dm-raid.c-1822- /* raid1 -> raid0 */
drivers/md/dm-raid.c:1823: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1824- mddev->raid_disks == 1)
--
drivers/md/dm-raid.c-1827- /* raid1 -> raid10 */
drivers/md/dm-raid.c:1828: if (mddev->new_level == 10)
drivers/md/dm-raid.c-1829- return 0;
--
drivers/md/dm-raid.c-1833- /* raid4 -> raid0 */
drivers/md/dm-raid.c:1834: if (mddev->new_level == 0)
drivers/md/dm-raid.c-1835- return 0;
--
drivers/md/dm-raid.c-1837- /* raid4 -> raid1/5 with 2 disks */
drivers/md/dm-raid.c:1838: if ((mddev->new_level == 1 || mddev->new_level == 5) &&
drivers/md/dm-raid.c-1839- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1842- /* raid4 -> raid5/6 with parity N */
drivers/md/dm-raid.c:1843: if (__within_range(mddev->new_level, 5, 6) &&
drivers/md/dm-raid.c-1844- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1849- /* raid5 with parity N -> raid0 */
drivers/md/dm-raid.c:1850: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1851- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1854- /* raid5 with parity N -> raid4 */
drivers/md/dm-raid.c:1855: if (mddev->new_level == 4 &&
drivers/md/dm-raid.c-1856- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1859- /* raid5 with 2 disks -> raid1/4/10 */
drivers/md/dm-raid.c:1860: if ((mddev->new_level == 1 || mddev->new_level == 4 || mddev->new_level == 10) &&
drivers/md/dm-raid.c-1861- mddev->raid_disks == 2)
--
drivers/md/dm-raid.c-1864- /* raid5_* -> raid6_*_6 with Q-Syndrome N (e.g. raid5_ra -> raid6_ra_6 */
drivers/md/dm-raid.c:1865: if (mddev->new_level == 6 &&
drivers/md/dm-raid.c-1866- ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) ||
--
drivers/md/dm-raid.c-1872- /* raid6 with parity N -> raid0 */
drivers/md/dm-raid.c:1873: if (mddev->new_level == 0 &&
drivers/md/dm-raid.c-1874- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1877- /* raid6 with parity N -> raid4 */
drivers/md/dm-raid.c:1878: if (mddev->new_level == 4 &&
drivers/md/dm-raid.c-1879- mddev->layout == ALGORITHM_PARITY_N)
--
drivers/md/dm-raid.c-1882- /* raid6_*_n with Q-Syndrome N -> raid5_* */
drivers/md/dm-raid.c:1883: if (mddev->new_level == 5 &&
drivers/md/dm-raid.c-1884- ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) ||
--
drivers/md/dm-raid.c=1898=static bool rs_takeover_requested(struct raid_set *rs)
drivers/md/dm-raid.c-1899-{
drivers/md/dm-raid.c:1900: return rs->md.new_level != rs->md.level;
drivers/md/dm-raid.c-1901-}
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2000- */
drivers/md/dm-raid.c:2001: __le32 new_level;
drivers/md/dm-raid.c-2002- __le32 new_layout;
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2156- */
drivers/md/dm-raid.c:2157: sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/dm-raid.c-2158- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2268- /* Superblock is authoritative wrt given raid set layout! */
drivers/md/dm-raid.c:2269: mddev->new_level = le32_to_cpu(sb->new_level);
drivers/md/dm-raid.c-2270- mddev->new_layout = le32_to_cpu(sb->new_layout);
--
drivers/md/dm-raid.c-2298- struct raid_type *rt_cur = get_raid_type_by_ll(mddev->level, mddev->layout);
drivers/md/dm-raid.c:2299: struct raid_type *rt_new = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-2300-
--
drivers/md/dm-raid.c=3526=static void raid_status(struct dm_target *ti, status_type_t type,
--
drivers/md/dm-raid.c-3543- /* *Should* always succeed */
drivers/md/dm-raid.c:3544: rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-3545- if (!rt)
--
drivers/md/dm-raid.c-3692- case STATUSTYPE_IMA:
drivers/md/dm-raid.c:3693: rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout);
drivers/md/dm-raid.c-3694- if (!rt)
--
drivers/md/md-llbitmap.c=1431=static int llbitmap_resize(struct mddev *mddev, sector_t blocks, int chunksize)
--
drivers/md/md-llbitmap.c-1448-
drivers/md/md-llbitmap.c:1449: reshape = mddev->delta_disks || mddev->new_level != mddev->level ||
drivers/md/md-llbitmap.c-1450- mddev->new_layout != mddev->layout ||
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
drivers/md/md.c:1514: mddev->new_level = sb->new_level;
drivers/md/md.c-1515- mddev->new_layout = sb->new_layout;
--
drivers/md/md.c-1521- mddev->delta_disks = 0;
drivers/md/md.c:1522: mddev->new_level = mddev->level;
drivers/md/md.c-1523- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1653- sb->reshape_position = mddev->reshape_position;
drivers/md/md.c:1654: sb->new_level = mddev->new_level;
drivers/md/md.c-1655- sb->delta_disks = mddev->delta_disks;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
drivers/md/md.c:2057: mddev->new_level = le32_to_cpu(sb->new_level);
drivers/md/md.c-2058- mddev->new_layout = le32_to_cpu(sb->new_layout);
--
drivers/md/md.c-2067- mddev->delta_disks = 0;
drivers/md/md.c:2068: mddev->new_level = mddev->level;
drivers/md/md.c-2069- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2268- sb->delta_disks = cpu_to_le32(mddev->delta_disks);
drivers/md/md.c:2269: sb->new_level = cpu_to_le32(mddev->new_level);
drivers/md/md.c-2270- sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4135- if (IS_ERR(priv)) {
drivers/md/md.c:4136: mddev->new_level = mddev->level;
drivers/md/md.c-4137- mddev->new_layout = mddev->layout;
--
drivers/md/md.c-4157- strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
drivers/md/md.c:4158: mddev->level = mddev->new_level;
drivers/md/md.c-4159- mddev->layout = mddev->new_layout;
--
drivers/md/md.c=4248=static ssize_t
drivers/md/md.c:4249:new_level_show(struct mddev *mddev, char *page)
drivers/md/md.c-4250-{
drivers/md/md.c:4251: return sprintf(page, "%d\n", mddev->new_level);
drivers/md/md.c-4252-}
--
drivers/md/md.c=4254=static ssize_t
drivers/md/md.c:4255:new_level_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-4256-{
--
drivers/md/md.c-4266-
drivers/md/md.c:4267: mddev->new_level = n;
drivers/md/md.c-4268- md_update_sb(mddev, 1);
--
drivers/md/md.c-4272-}
drivers/md/md.c:4273:static struct md_sysfs_entry md_new_level =
drivers/md/md.c:4274:__ATTR(new_level, 0664, new_level_show, new_level_store);
drivers/md/md.c-4275-
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5740- mddev->reshape_backwards = 0;
drivers/md/md.c:5741: mddev->new_level = mddev->level;
drivers/md/md.c-5742- mddev->new_layout = mddev->layout;
--
drivers/md/md.c=6063=static struct attribute *md_default_attrs[] = {
drivers/md/md.c-6064- &md_level.attr,
drivers/md/md.c:6065: &md_new_level.attr,
drivers/md/md.c-6066- &md_bitmap_type.attr,
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6731- mddev->level = pers->head.id;
drivers/md/md.c:6732: mddev->new_level = pers->head.id;
drivers/md/md.c-6733- }
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7008- mddev->reshape_backwards = 0;
drivers/md/md.c:7009: mddev->new_level = LEVEL_NONE;
drivers/md/md.c-7010- mddev->new_layout = 0;
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7971-
drivers/md/md.c:7972: mddev->new_level = mddev->level;
drivers/md/md.c-7973- mddev->new_chunk_sectors = mddev->chunk_sectors;
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-467- sector_t reshape_position;
drivers/md/md.h:468: int delta_disks, new_level, new_layout;
drivers/md/md.h-469- int new_chunk_sectors;
--
drivers/md/raid0.c=646=static void *raid0_takeover_raid45(struct mddev *mddev)
--
drivers/md/raid0.c-668- /* Set new parameters */
drivers/md/raid0.c:669: mddev->new_level = 0;
drivers/md/raid0.c-670- mddev->new_layout = 0;
--
drivers/md/raid0.c=683=static void *raid0_takeover_raid10(struct mddev *mddev)
--
drivers/md/raid0.c-710- /* Set new parameters */
drivers/md/raid0.c:711: mddev->new_level = 0;
drivers/md/raid0.c-712- mddev->new_layout = 0;
--
drivers/md/raid0.c=725=static void *raid0_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid0.c-753- /* Set new parameters */
drivers/md/raid0.c:754: mddev->new_level = 0;
drivers/md/raid0.c-755- mddev->new_layout = 0;
--
drivers/md/raid1.c=3315=static int raid1_reshape(struct mddev *mddev)
--
drivers/md/raid1.c-3338- mddev->layout != mddev->new_layout ||
drivers/md/raid1.c:3339: mddev->level != mddev->new_level) {
drivers/md/raid1.c-3340- mddev->new_chunk_sectors = mddev->chunk_sectors;
drivers/md/raid1.c-3341- mddev->new_layout = mddev->layout;
drivers/md/raid1.c:3342: mddev->new_level = mddev->level;
drivers/md/raid1.c-3343- return -EINVAL;
--
drivers/md/raid1.c=3421=static void *raid1_takeover(struct mddev *mddev)
--
drivers/md/raid1.c-3427- struct r1conf *conf;
drivers/md/raid1.c:3428: mddev->new_level = 1;
drivers/md/raid1.c-3429- mddev->new_layout = 0;
--
drivers/md/raid10.c=4180=static void *raid10_takeover_raid0(struct mddev *mddev, sector_t size, int devs)
--
drivers/md/raid10.c-4192- /* Set new parameters */
drivers/md/raid10.c:4193: mddev->new_level = 10;
drivers/md/raid10.c-4194- /* new layout: far_copies = 1, near_copies = 2 */
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7644-
drivers/md/raid5.c:7645: if (mddev->new_level != 5
drivers/md/raid5.c:7646: && mddev->new_level != 4
drivers/md/raid5.c:7647: && mddev->new_level != 6) {
drivers/md/raid5.c-7648- pr_warn("md/raid:%s: raid level not set to 4/5/6 (%d)\n",
drivers/md/raid5.c:7649: mdname(mddev), mddev->new_level);
drivers/md/raid5.c-7650- return ERR_PTR(-EIO);
drivers/md/raid5.c-7651- }
drivers/md/raid5.c:7652: if ((mddev->new_level == 5
drivers/md/raid5.c-7653- && !algorithm_valid_raid5(mddev->new_layout)) ||
drivers/md/raid5.c:7654: (mddev->new_level == 6
drivers/md/raid5.c-7655- && !algorithm_valid_raid6(mddev->new_layout))) {
--
drivers/md/raid5.c-7659- }
drivers/md/raid5.c:7660: if (mddev->new_level == 6 && mddev->raid_disks < 4) {
drivers/md/raid5.c-7661- pr_warn("md/raid:%s: not enough configured devices (%d, minimum 4)\n",
--
drivers/md/raid5.c-7774-
drivers/md/raid5.c:7775: conf->level = mddev->new_level;
drivers/md/raid5.c-7776- conf->chunk_sectors = mddev->new_chunk_sectors;
--
drivers/md/raid5.c-7808-
drivers/md/raid5.c:7809: conf->level = mddev->new_level;
drivers/md/raid5.c-7810- if (conf->level == 6) {
--
drivers/md/raid5.c-7870-
drivers/md/raid5.c:7871: sprintf(pers_name, "raid%d", mddev->new_level);
drivers/md/raid5.c-7872- rcu_assign_pointer(conf->thread,
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8057-
drivers/md/raid5.c:8058: if (mddev->new_level != mddev->level) {
drivers/md/raid5.c-8059- pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",
--
drivers/md/raid5.c-8113- } else {
drivers/md/raid5.c:8114: BUG_ON(mddev->level != mddev->new_level);
drivers/md/raid5.c-8115- BUG_ON(mddev->layout != mddev->new_layout);
--
drivers/md/raid5.c=8883=static void *raid45_takeover_raid0(struct mddev *mddev, int level)
--
drivers/md/raid5.c-8897- mddev->dev_sectors = sectors;
drivers/md/raid5.c:8898: mddev->new_level = level;
drivers/md/raid5.c-8899- mddev->new_layout = ALGORITHM_PARITY_N;
--
drivers/md/raid5.c=8909=static void *raid5_takeover_raid1(struct mddev *mddev)
--
drivers/md/raid5.c-8929-
drivers/md/raid5.c:8930: mddev->new_level = 5;
drivers/md/raid5.c-8931- mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
--
drivers/md/raid5.c=8941=static void *raid5_takeover_raid6(struct mddev *mddev)
--
drivers/md/raid5.c-8966- }
drivers/md/raid5.c:8967: mddev->new_level = 5;
drivers/md/raid5.c-8968- mddev->new_layout = new_layout;
--
drivers/md/raid5.c=9034=static void *raid5_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9047- mddev->new_layout = ALGORITHM_PARITY_N;
drivers/md/raid5.c:9048: mddev->new_level = 5;
drivers/md/raid5.c-9049- return setup_conf(mddev);
--
drivers/md/raid5.c=9057=static void *raid4_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9067- mddev->new_layout = 0;
drivers/md/raid5.c:9068: mddev->new_level = 4;
drivers/md/raid5.c-9069- return setup_conf(mddev);
--
drivers/md/raid5.c=9076=static void *raid6_takeover(struct mddev *mddev)
--
drivers/md/raid5.c-9114- }
drivers/md/raid5.c:9115: mddev->new_level = 6;
drivers/md/raid5.c-9116- mddev->new_layout = new_layout;
]
|
| 315/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 24709
output: 36
thoughts: 32
Thoughts: Okay, let's dive into this. Here's how I'd approach this task, as if these were my internal thoughts:
**Locating the `md_run()` Function**
Right, so I need to find the implementation of `md_run()`. It's a core function, so my first instinct is to check the most logical place: the driver for the software RAID functionality. That points me directly to `drivers/md/md.c`. Let's confirm that that is the location of the core functionality. I will look there first.
|
| 316/5 |
2026/09/09 21:15 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6650 LineCount:85]
Results: map[Contents:6650: int md_run(struct mddev *mddev)
6651: {
6652: int err;
6653: struct md_rdev *rdev;
6654: struct md_personality *pers;
6655:
6656: if (list_empty(&mddev->disks))
6657: /* cannot run an array with no devices.. */
6658: return -EINVAL;
6659:
6660: if (mddev->pers)
6661: return -EBUSY;
6662: /* Cannot run until previous stop completes properly */
6663: if (mddev->sysfs_active)
6664: return -EBUSY;
6665:
6666: /*
6667: * Analyze all RAID superblock(s)
6668: */
6669: if (!mddev->raid_disks) {
6670: if (!mddev->persistent)
6671: return -EINVAL;
6672: err = analyze_sbs(mddev);
6673: if (err)
6674: return -EINVAL;
6675: }
6676:
6677: if (mddev->level != LEVEL_NONE)
6678: request_module("md-level-%d", mddev->level);
6679: else if (mddev->clevel[0])
6680: request_module("md-%s", mddev->clevel);
6681:
6682: /*
6683: * Drop all container device buffers, from now on
6684: * the only valid external interface is through the md
6685: * device.
6686: */
6687: clear_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6688: rdev_for_each(rdev, mddev) {
6689: if (test_bit(Faulty, &rdev->flags))
6690: continue;
6691: sync_blockdev(rdev->bdev);
6692: invalidate_bdev(rdev->bdev);
6693: if (mddev->ro != MD_RDONLY && rdev_read_only(rdev)) {
6694: mddev->ro = MD_RDONLY;
6695: if (!mddev_is_dm(mddev))
6696: set_disk_ro(mddev->gendisk, 1);
6697: }
6698:
6699: if (rdev->sb_page)
6700: set_bit(MD_HAS_SUPERBLOCK, &mddev->flags);
6701:
6702: /* perform some consistency tests on the device.
6703: * We don't want the data to overlap the metadata,
6704: * Internal Bitmap issues have been handled elsewhere.
6705: */
6706: if (rdev->meta_bdev) {
6707: /* Nothing to check */;
6708: } else if (rdev->data_offset < rdev->sb_start) {
6709: if (mddev->dev_sectors &&
6710: rdev->data_offset + mddev->dev_sectors
6711: > rdev->sb_start) {
6712: pr_warn("md: %s: data overlaps metadata\n",
6713: mdname(mddev));
6714: return -EINVAL;
6715: }
6716: } else {
6717: if (rdev->sb_start + rdev->sb_size/512
6718: > rdev->data_offset) {
6719: pr_warn("md: %s: metadata overlaps data\n",
6720: mdname(mddev));
6721: return -EINVAL;
6722: }
6723: }
6724: sysfs_notify_dirent_safe(rdev->sysfs_state);
6725: }
6726:
6727: pers = get_pers(mddev->level, mddev->clevel);
6728: if (!pers)
6729: return -EINVAL;
6730: if (mddev->level != pers->head.id) {
6731: mddev->level = pers->head.id;
6732: mddev->new_level = pers->head.id;
6733: }
6734: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
]
|
| 317/5 |
2026/09/09 21:15 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 26182
output: 36
thoughts: 10
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Analyzing the Next Stage**
Alright, so the instruction is to continue reading `md_run`. That's straightforward. It's a clear directive, implying we've reached a point in the overall process where the next logical step is to delve further into the contents or execution flow of that specific script or function. Given that this seems to be a continuation, my primary concern shifts to context. What was the *purpose* of `md_run` in the first place? What's the surrounding framework? Am I looking at a setup script, a simulation routine, a post-processing tool, or something else entirely? The nature of `md_run` will color my analysis significantly. I'll need to immediately start considering the expected inputs, outputs, dependencies, and any key algorithms or methods employed within it. I'll be looking for things like molecular dynamics parameters, data file paths, force field definitions, integration algorithms, and any custom code. Understanding those will be the key to understanding its overall contribution to the end goal.
|
| 318/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6735 LineCount:80]
Results: map[Contents:6735:
6736: if (mddev->reshape_position != MaxSector &&
6737: pers->start_reshape == NULL) {
6738: /* This personality cannot handle reshaping... */
6739: put_pers(pers);
6740: return -EINVAL;
6741: }
6742:
6743: if (pers->sync_request) {
6744: /* Warn if this is a potentially silly
6745: * configuration.
6746: */
6747: struct md_rdev *rdev2;
6748: int warned = 0;
6749:
6750: rdev_for_each(rdev, mddev)
6751: rdev_for_each(rdev2, mddev) {
6752: if (rdev < rdev2 &&
6753: rdev->bdev->bd_disk ==
6754: rdev2->bdev->bd_disk) {
6755: pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",
6756: mdname(mddev),
6757: rdev->bdev,
6758: rdev2->bdev);
6759: warned = 1;
6760: }
6761: }
6762:
6763: if (warned)
6764: pr_warn("True protection against single-disk failure might be compromised.\n");
6765: }
6766:
6767: /* dm-raid expect sync_thread to be frozen until resume */
6768: if (!mddev_is_dm(mddev))
6769: mddev->recovery = 0;
6770:
6771: /* may be over-ridden by personality */
6772: mddev->resync_max_sectors = mddev->dev_sectors;
6773:
6774: mddev->ok_start_degraded = start_dirty_degraded;
6775:
6776: if (start_readonly && md_is_rdwr(mddev))
6777: mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
6778:
6779: err = pers->run(mddev);
6780: if (err)
6781: pr_warn("md: pers->run() failed ...\n");
6782: else if (pers->size(mddev, 0, 0) < mddev->array_sectors) {
6783: WARN_ONCE(!mddev->external_size,
6784: "%s: default size too small, but 'external_size' not in effect?\n",
6785: __func__);
6786: pr_warn("md: invalid array_size %llu > default size %llu\n",
6787: (unsigned long long)mddev->array_sectors / 2,
6788: (unsigned long long)pers->size(mddev, 0, 0) / 2);
6789: err = -EINVAL;
6790: }
6791: if (err == 0 && pers->sync_request &&
6792: (mddev->bitmap_info.file || mddev->bitmap_info.offset)) {
6793: err = md_bitmap_create(mddev);
6794: if (err)
6795: pr_warn("%s: failed to create bitmap (%d)\n",
6796: mdname(mddev), err);
6797: }
6798: if (err)
6799: goto bitmap_abort;
6800:
6801: if (mddev->bitmap_info.max_write_behind > 0) {
6802: bool create_pool = false;
6803:
6804: rdev_for_each(rdev, mddev) {
6805: if (test_bit(WriteMostly, &rdev->flags) &&
6806: rdev_init_serial(rdev))
6807: create_pool = true;
6808: }
6809: if (create_pool && mddev->serial_info_pool == NULL) {
6810: mddev->serial_info_pool =
6811: mempool_create_kmalloc_pool(NR_SERIAL_INFOS,
6812: sizeof(struct serial_info));
6813: if (!mddev->serial_info_pool) {
6814: err = -ENOMEM;
]
|
| 319/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 27755
output: 26
thoughts: 36
Thoughts: Okay, let's dive into this. Here's how I'd approach this task, as if these were my internal thoughts:
**Investigating `md.c`'s Shutdown/Restart Logic**
Alright, I'm trying to figure out the behavior within `md.c` when the system stops or restarts. I need to get a handle on what actions it takes during these transitions. My gut tells me there might be some crucial cleanup or re-initialization going on, and I need to identify it.
My first thought is, beyond what I know already, to zero in on what *else* is involved when the process is stopping or restarting. It's a key area to understand if I want to have a holistic picture.
Now, to get a specific picture of what's happening when there's an alteration in position. I'm going to conduct a search. I'll need to locate where `reshape_position` is located within the same file.
|
| 320/5 |
2026/09/09 21:16 |
tool |
grepper |
0m
Args: map[Expression:reshape_position PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=445=static bool rs_is_reshaping(struct raid_set *rs)
drivers/md/dm-raid.c-446-{
drivers/md/dm-raid.c:447: return rs->md.reshape_position != MaxSector;
drivers/md/dm-raid.c-448-}
--
drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-1995- */
drivers/md/dm-raid.c:1996: __le64 reshape_position;
drivers/md/dm-raid.c-1997-
--
drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2163- smp_rmb(); /* Make sure we access most recent reshape position */
drivers/md/dm-raid.c:2164: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/dm-raid.c:2165: if (le64_to_cpu(sb->reshape_position) != MaxSector) {
drivers/md/dm-raid.c-2166- /* Flag ongoing reshape */
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2255-
drivers/md/dm-raid.c:2256: mddev->reshape_position = MaxSector;
drivers/md/dm-raid.c-2257-
--
drivers/md/dm-raid.c-2263- /*
drivers/md/dm-raid.c:2264: * Reshaping is supported, e.g. reshape_position is valid
drivers/md/dm-raid.c-2265- * in superblock and superblock content is authoritative.
--
drivers/md/dm-raid.c-2287-
drivers/md/dm-raid.c:2288: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/dm-raid.c-2289- rs->raid_type = get_raid_type_by_ll(mddev->level, mddev->layout);
--
drivers/md/dm-raid.c-2398- } else if (rs_is_reshaping(rs)) {
drivers/md/dm-raid.c:2399: DMERR("'rebuild' specified while raid set is being reshaped (reshape_position=%llu)",
drivers/md/dm-raid.c:2400: (unsigned long long) mddev->reshape_position);
drivers/md/dm-raid.c-2401- return -EINVAL;
--
drivers/md/dm-raid.c=3382=static enum sync_state decipher_sync_action(struct mddev *mddev, unsigned long recovery)
--
drivers/md/dm-raid.c-3404-
drivers/md/dm-raid.c:3405: if (mddev->reshape_position != MaxSector)
drivers/md/dm-raid.c-3406- return st_reshape;
--
drivers/md/md-cluster.c=295=static void recover_bitmaps(struct md_thread *thread)
--
drivers/md/md-cluster.c-335- test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
drivers/md/md-cluster.c:336: mddev->reshape_position != MaxSector)
drivers/md/md-cluster.c-337- md_wakeup_thread(mddev->sync_thread);
--
drivers/md/md-cluster.c=1020=static int leave(struct mddev *mddev)
--
drivers/md/md-cluster.c-1035- if ((cinfo->slot_number > 0 && mddev->resync_offset != MaxSector) ||
drivers/md/md-cluster.c:1036: (mddev->reshape_position != MaxSector &&
drivers/md/md-cluster.c-1037- test_bit(MD_CLOSING, &mddev->flags)))
--
drivers/md/md-llbitmap.c=442=static sector_t llbitmap_personality_sync_size(struct llbitmap *llbitmap,
--
drivers/md/md-llbitmap.c-446-
drivers/md/md-llbitmap.c:447: if (READ_ONCE(mddev->reshape_position) == MaxSector ||
drivers/md/md-llbitmap.c-448- !mddev->private || !mddev->pers ||
--
drivers/md/md-llbitmap.c=1538=static bool llbitmap_map_previous(struct llbitmap *llbitmap, sector_t offset,
--
drivers/md/md-llbitmap.c-1541- struct mddev *mddev = llbitmap->mddev;
drivers/md/md-llbitmap.c:1542: sector_t boundary = READ_ONCE(mddev->reshape_position);
drivers/md/md-llbitmap.c-1543-
--
drivers/md/md.c=740=int mddev_init(struct mddev *mddev)
--
drivers/md/md.c-788- init_waitqueue_head(&mddev->recovery_wait);
drivers/md/md.c:789: mddev->reshape_position = MaxSector;
drivers/md/md.c-790- mddev->reshape_backwards = 0;
--
drivers/md/md.c=1176=int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
--
drivers/md/md.c-1188- bio.bi_iter.bi_sector = sector + rdev->sb_start;
drivers/md/md.c:1189: else if (rdev->mddev->reshape_position != MaxSector &&
drivers/md/md.c-1190- (rdev->mddev->reshape_backwards ==
drivers/md/md.c:1191: (sector >= rdev->mddev->reshape_position)))
drivers/md/md.c-1192- bio.bi_iter.bi_sector = sector + rdev->new_data_offset;
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1511- if (mddev->minor_version >= 91) {
drivers/md/md.c:1512: mddev->reshape_position = sb->reshape_position;
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
--
drivers/md/md.c-1519- } else {
drivers/md/md.c:1520: mddev->reshape_position = MaxSector;
drivers/md/md.c-1521- mddev->delta_disks = 0;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1648-
drivers/md/md.c:1649: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-1650- sb->minor_version = 90;
--
drivers/md/md.c-1652- sb->minor_version = 91;
drivers/md/md.c:1653: sb->reshape_position = mddev->reshape_position;
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
--
drivers/md/md.c-1684- /* we have nowhere to store the recovery_offset,
drivers/md/md.c:1685: * but if it is not below the reshape_position,
drivers/md/md.c-1686- * we can piggy-back on that.
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2054- if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c:2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
--
drivers/md/md.c-2065- } else {
drivers/md/md.c:2066: mddev->reshape_position = MaxSector;
drivers/md/md.c-2067- mddev->delta_disks = 0;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2263-
drivers/md/md.c:2264: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-2265- sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
drivers/md/md.c:2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/md.c=2753=static bool does_sb_need_changing(struct mddev *mddev)
--
drivers/md/md.c-2784- if ((mddev->dev_sectors != le64_to_cpu(sb->size)) ||
drivers/md/md.c:2785: (mddev->reshape_position != le64_to_cpu(sb->reshape_position)) ||
drivers/md/md.c-2786- (mddev->layout != le32_to_cpu(sb->layout)) ||
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4086- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
drivers/md/md.c:4087: mddev->reshape_position != MaxSector ||
drivers/md/md.c-4088- mddev->sysfs_active)
--
drivers/md/md.c=4357=layout_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4359- /* just a number, not meaningful for all levels */
drivers/md/md.c:4360: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4361- mddev->layout != mddev->new_layout)
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4392- mddev->new_layout = n;
drivers/md/md.c:4393: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4394- mddev->layout = n;
--
drivers/md/md.c=4403=raid_disks_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4406- return 0;
drivers/md/md.c:4407: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4408- mddev->delta_disks != 0)
--
drivers/md/md.c=4417=raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4433- err = update_raid_disks(mddev, n);
drivers/md/md.c:4434: } else if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-4435- struct md_rdev *rdev;
--
drivers/md/md.c=4470=chunk_size_show(struct mddev *mddev, char *page)
drivers/md/md.c-4471-{
drivers/md/md.c:4472: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-4473- mddev->chunk_sectors != mddev->new_chunk_sectors)
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4505- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4506: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4507- mddev->chunk_sectors = n >> 9;
--
drivers/md/md.c=5066=static enum sync_action md_get_active_sync_action(struct mddev *mddev)
--
drivers/md/md.c-5073-
drivers/md/md.c:5074: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5075- return ACTION_RESHAPE;
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5248-
drivers/md/md.c:5249: if (mddev->reshape_position == MaxSector ||
drivers/md/md.c-5250- mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=5710=static ssize_t
drivers/md/md.c:5711:reshape_position_show(struct mddev *mddev, char *page)
drivers/md/md.c-5712-{
drivers/md/md.c:5713: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-5714- return sprintf(page, "%llu\n",
drivers/md/md.c:5715: (unsigned long long)mddev->reshape_position);
drivers/md/md.c-5716- strcpy(page, "none\n");
--
drivers/md/md.c=5720=static ssize_t
drivers/md/md.c:5721:reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-5722-{
--
drivers/md/md.c-5737- goto unlock;
drivers/md/md.c:5738: mddev->reshape_position = new;
drivers/md/md.c-5739- mddev->delta_disks = 0;
--
drivers/md/md.c-5751-
drivers/md/md.c:5752:static struct md_sysfs_entry md_reshape_position =
drivers/md/md.c:5753:__ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show,
drivers/md/md.c:5754: reshape_position_store);
drivers/md/md.c-5755-
--
drivers/md/md.c=6063=static struct attribute *md_default_attrs[] = {
--
drivers/md/md.c-6076- &md_array_state.attr,
drivers/md/md.c:6077: &md_reshape_position.attr,
drivers/md/md.c-6078- &md_reshape_direction.attr,
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6735-
drivers/md/md.c:6736: if (mddev->reshape_position != MaxSector &&
drivers/md/md.c-6737- pers->start_reshape == NULL) {
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-6975- mddev->resync_max = MaxSector;
drivers/md/md.c:6976: mddev->reshape_position = MaxSector;
drivers/md/md.c-6977- /* we still need mddev->external in export_rdev, do not clear it yet */
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7964-
drivers/md/md.c:7965: mddev->reshape_position = MaxSector;
drivers/md/md.c-7966-
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8047- test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
drivers/md/md.c:8048: mddev->reshape_position != MaxSector)
drivers/md/md.c-8049- return -EBUSY;
--
drivers/md/md.c=8842=static int status_resync(struct seq_file *seq, struct mddev *mddev)
--
drivers/md/md.c-8887- }
drivers/md/md.c:8888: if (mddev->reshape_position != MaxSector)
drivers/md/md.c-8889- seq_printf(seq, "\treshape=REMOTE");
--
drivers/md/md.c=9395=struct bio *mddev_bio_split_at_reshape_offset(struct mddev *mddev,
--
drivers/md/md.c-9411-
drivers/md/md.c:9412: boundary = READ_ONCE(mddev->reshape_position);
drivers/md/md.c-9413- start = bio->bi_iter.bi_sector;
--
drivers/md/md.c=9610=static sector_t md_sync_position(struct mddev *mddev, enum sync_action action)
--
drivers/md/md.c-9629- if (mddev_is_clustered(mddev) &&
drivers/md/md.c:9630: mddev->reshape_position != MaxSector)
drivers/md/md.c:9631: return mddev->reshape_position;
drivers/md/md.c-9632- return 0;
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10211- /* Check if reshape is in progress first. */
drivers/md/md.c:10212: if (mddev->reshape_position != MaxSector) {
drivers/md/md.c-10213- if (mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10267- */
drivers/md/md.c:10268: if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10269- md_spares_need_change(mddev)) {
--
drivers/md/md.c-10280- */
drivers/md/md.c:10281: if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10282- md_spares_need_change(mddev)) {
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10886- * reshape is happening in the remote node, we need to
drivers/md/md.c:10887: * update reshape_position and call start_reshape.
drivers/md/md.c-10888- */
drivers/md/md.c:10889: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-10890- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.c-10894- } else if (test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) &&
drivers/md/md.c:10895: mddev->reshape_position != MaxSector &&
drivers/md/md.c-10896- !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c-10897- /* reshape is just done in another node. */
drivers/md/md.c:10898: mddev->reshape_position = MaxSector;
drivers/md/md.c-10899- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-464- * This is written to the superblock.
drivers/md/md.h:465: * If reshape_position is MaxSector, then no reshape is happening (yet).
drivers/md/md.h-466- */
drivers/md/md.h:467: sector_t reshape_position;
drivers/md/md.h-468- int delta_disks, new_level, new_layout;
--
drivers/md/md.h=690=static inline bool reshape_interrupted(struct mddev *mddev)
--
drivers/md/md.h-692- /* reshape never start */
drivers/md/md.h:693: if (mddev->reshape_position == MaxSector)
drivers/md/md.h-694- return false;
--
drivers/md/raid1.c=3185=static int raid1_run(struct mddev *mddev)
--
drivers/md/raid1.c-3195- }
drivers/md/raid1.c:3196: if (mddev->reshape_position != MaxSector) {
drivers/md/raid1.c:3197: pr_warn("md/raid1:%s: reshape_position set but not supported\n",
drivers/md/raid1.c-3198- mdname(mddev));
--
drivers/md/raid10.c=1343=static bool raid10_write_request(struct mddev *mddev, struct bio *bio,
--
drivers/md/raid10.c-1370- bio->bi_iter.bi_sector < conf->reshape_progress))) {
drivers/md/raid10.c:1371: /* Need to update reshape_position in metadata */
drivers/md/raid10.c:1372: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-1373- set_mask_bits(&mddev->sb_flags, 0,
--
drivers/md/raid10.c-1380-
drivers/md/raid10.c:1381: conf->reshape_safe = mddev->reshape_position;
drivers/md/raid10.c-1382- }
--
drivers/md/raid10.c=3141=static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-3159- mddev->resync_offset == MaxSector &&
drivers/md/raid10.c:3160: mddev->reshape_position == MaxSector &&
drivers/md/raid10.c-3161- !test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
--
drivers/md/raid10.c=3828=static struct r10conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid10.c-3874- calc_sectors(conf, mddev->dev_sectors);
drivers/md/raid10.c:3875: if (mddev->reshape_position == MaxSector) {
drivers/md/raid10.c-3876- conf->prev = conf->geo;
--
drivers/md/raid10.c-3882- }
drivers/md/raid10.c:3883: conf->reshape_progress = mddev->reshape_position;
drivers/md/raid10.c-3884- if (conf->prev.far_offset)
--
drivers/md/raid10.c=4132=static int raid10_resize(struct mddev *mddev, sector_t sectors)
--
drivers/md/raid10.c-4148-
drivers/md/raid10.c:4149: if (mddev->reshape_position != MaxSector)
drivers/md/raid10.c-4150- return -EBUSY;
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4510- mddev->raid_disks = conf->geo.raid_disks;
drivers/md/raid10.c:4511: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-4512- set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
--
drivers/md/raid10.c-4536- conf->reshape_safe = MaxSector;
drivers/md/raid10.c:4537: mddev->reshape_position = MaxSector;
drivers/md/raid10.c-4538- spin_unlock_irq(&conf->device_lock);
--
drivers/md/raid10.c=4574=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-4580- * This might mean we pause for normal IO in the middle of
drivers/md/raid10.c:4581: * a chunk, but that is not a problem as mddev->reshape_position
drivers/md/raid10.c-4582- * can record any location.
--
drivers/md/raid10.c-4695- time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) {
drivers/md/raid10.c:4696: /* Need to update reshape_position in metadata */
drivers/md/raid10.c-4697- wait_barrier(conf);
--
drivers/md/raid10.c-4704- }
drivers/md/raid10.c:4705: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-4706- if (mddev->reshape_backwards)
--
drivers/md/raid10.c-4719- }
drivers/md/raid10.c:4720: conf->reshape_safe = mddev->reshape_position;
drivers/md/raid10.c-4721- allow_barrier(conf);
--
drivers/md/raid10.c-4768- if (sb) {
drivers/md/raid10.c:4769: sb_reshape_pos = le64_to_cpu(sb->reshape_position);
drivers/md/raid10.c-4770- /*
--
drivers/md/raid10.c=4928=static void raid10_update_reshape_pos(struct mddev *mddev)
--
drivers/md/raid10.c-4933- mddev->cluster_ops->resync_info_get(mddev, &lo, &hi);
drivers/md/raid10.c:4934: if (((mddev->reshape_position <= hi) && (mddev->reshape_position >= lo))
drivers/md/raid10.c:4935: || mddev->reshape_position == MaxSector)
drivers/md/raid10.c:4936: conf->reshape_progress = mddev->reshape_position;
drivers/md/raid10.c-4937- else
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5076- mddev->chunk_sectors = 1 << conf->geo.chunk_shift;
drivers/md/raid10.c:5077: mddev->reshape_position = MaxSector;
drivers/md/raid10.c-5078- mddev->delta_disks = 0;
--
drivers/md/raid5.c=749=static bool has_failed(struct r5conf *conf)
--
drivers/md/raid5.c-755-
drivers/md/raid5.c:756: if (conf->mddev->reshape_position != MaxSector)
drivers/md/raid5.c-757- degraded = raid5_calc_degraded(conf);
--
drivers/md/raid5.c=5784=static void make_discard_request(struct mddev *mddev, struct bio *bi)
--
drivers/md/raid5.c-5793-
drivers/md/raid5.c:5794: if (mddev->reshape_position != MaxSector)
drivers/md/raid5.c-5795- goto complete_again;
--
drivers/md/raid5.c=6218=static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
--
drivers/md/raid5.c-6249- if (rw == READ && mddev->degraded == 0 &&
drivers/md/raid5.c:6250: mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-6251- bi = chunk_aligned_read(mddev, bi);
--
drivers/md/raid5.c=6379=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
--
drivers/md/raid5.c-6525- }
drivers/md/raid5.c:6526: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6527- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c-6544- spin_lock_irq(&conf->device_lock);
drivers/md/raid5.c:6545: conf->reshape_safe = mddev->reshape_position;
drivers/md/raid5.c-6546- spin_unlock_irq(&conf->device_lock);
--
drivers/md/raid5.c-6641- }
drivers/md/raid5.c:6642: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6643- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c-6660- spin_lock_irq(&conf->device_lock);
drivers/md/raid5.c:6661: conf->reshape_safe = mddev->reshape_position;
drivers/md/raid5.c-6662- spin_unlock_irq(&conf->device_lock);
--
drivers/md/raid5.c=7151=raid5_store_stripe_size(struct mddev *mddev, const char *page, size_t len)
--
drivers/md/raid5.c-7190- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
drivers/md/raid5.c:7191: mddev->reshape_position != MaxSector || mddev->sysfs_active) {
drivers/md/raid5.c-7192- err = -EBUSY;
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7725- conf->raid_disks = mddev->raid_disks;
drivers/md/raid5.c:7726: if (mddev->reshape_position == MaxSector)
drivers/md/raid5.c-7727- conf->previous_raid_disks = mddev->raid_disks;
--
drivers/md/raid5.c-7820- conf->algorithm = mddev->new_layout;
drivers/md/raid5.c:7821: conf->reshape_progress = mddev->reshape_position;
drivers/md/raid5.c-7822- if (conf->reshape_progress != MaxSector) {
--
drivers/md/raid5.c-7830- conf->min_nr_stripes = NR_STRIPES;
drivers/md/raid5.c:7831: if (mddev->reshape_position != MaxSector) {
drivers/md/raid5.c-7832- int stripes = max_t(int,
--
drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8032-
drivers/md/raid5.c:8033: if (mddev->reshape_position != MaxSector) {
drivers/md/raid5.c-8034- /* Check that we can continue the reshape.
--
drivers/md/raid5.c-8063- old_disks = mddev->raid_disks - mddev->delta_disks;
drivers/md/raid5.c:8064: /* reshape_position must be on a new-stripe boundary, and one
drivers/md/raid5.c-8065- * further up in new geometry must map after here in old
--
drivers/md/raid5.c-8067- * If the chunk sizes are different, then as we perform reshape
drivers/md/raid5.c:8068: * in units of the largest of the two, reshape_position needs
drivers/md/raid5.c-8069- * be a multiple of the largest chunk size times new data disks.
drivers/md/raid5.c-8070- */
drivers/md/raid5.c:8071: here_new = mddev->reshape_position;
drivers/md/raid5.c-8072- chunk_sectors = max(mddev->chunk_sectors, mddev->new_chunk_sectors);
--
drivers/md/raid5.c-8074- if (sector_div(here_new, chunk_sectors * new_data_disks)) {
drivers/md/raid5.c:8075: pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n",
drivers/md/raid5.c-8076- mdname(mddev));
--
drivers/md/raid5.c-8080- /* here_new is the stripe we will write to */
drivers/md/raid5.c:8081: here_old = mddev->reshape_position;
drivers/md/raid5.c-8082- sector_div(here_old, chunk_sectors * (old_disks-max_degraded));
--
drivers/md/raid5.c-8106- /* Reading from the same stripe as writing to - bad */
drivers/md/raid5.c:8107: pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
drivers/md/raid5.c-8108- mdname(mddev));
--
drivers/md/raid5.c=8444=static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/raid5.c-8507- if (test_bit(WantReplacement, &tmp->flags) &&
drivers/md/raid5.c:8508: mddev->reshape_position == MaxSector &&
drivers/md/raid5.c-8509- p->replacement == NULL) {
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
--
drivers/md/raid5.c=8635=static int raid5_start_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8755- mddev->raid_disks = conf->raid_disks;
drivers/md/raid5.c:8756: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-8757- set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
--
drivers/md/raid5.c=8772=static void end_reshape(struct r5conf *conf)
--
drivers/md/raid5.c-8791- conf->reshape_progress = MaxSector;
drivers/md/raid5.c:8792: conf->mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8793- rdev_for_each(rdev, conf->mddev)
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8841- mddev->chunk_sectors = conf->chunk_sectors;
drivers/md/raid5.c:8842: mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8843- mddev->delta_disks = 0;
]
|
| 321/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 38301
output: 36
thoughts: 41
Thoughts: Okay, let's break this down.
**Diving into the `raid_disks_store` Function**
Alright, so the first thing I need to understand is the sequence of events triggered by a call to `raid_disks_store`. The goal here is to grasp the data flow and any side effects. Now I need to examine the code itself; I'll begin by analyzing the function `raid_disks_store` itself and then I will examine `update_raid_disks`. The interplay between those two is key. I'm expecting some kind of state update or persistence mechanism, as the name suggests "store". I anticipate that `update_raid_disks` is probably where the core logic of modifying or refreshing the RAID disk data resides. I'm prepared to look for database interactions, cache invalidations, or perhaps even calls to low-level hardware control functions.
|
| 322/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4415 LineCount:45]
Results: map[Contents:4415:
4416: static ssize_t
4417: raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
4418: {
4419: unsigned int n;
4420: unsigned int noio_flags;
4421: int err;
4422:
4423: err = kstrtouint(buf, 10, &n);
4424: if (err < 0)
4425: return err;
4426:
4427: err = mddev_suspend_and_lock(mddev);
4428: if (err)
4429: return err;
4430: noio_flags = memalloc_noio_save();
4431: if (mddev->pers) {
4432: if (n != mddev->raid_disks)
4433: err = update_raid_disks(mddev, n);
4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
4439: rdev_for_each(rdev, mddev) {
4440: if (olddisks < n &&
4441: rdev->data_offset < rdev->new_data_offset)
4442: goto out_unlock;
4443: if (olddisks > n &&
4444: rdev->data_offset > rdev->new_data_offset)
4445: goto out_unlock;
4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
4451: } else
4452: mddev->raid_disks = n;
4453: out_unlock:
4454: memalloc_noio_restore(noio_flags);
4455: mddev_unlock_and_resume(mddev);
4456: return err ? err : len;
4457: }
4458: static struct md_sysfs_entry md_raid_disks =
4459: __ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
]
|
| 323/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 39305
output: 36
thoughts: 14
Thoughts: Okay, let's dive into this `update_raid_disks` function. I need to understand what's happening here. I'm assuming, given the name, this function is responsible for⦠well, updating RAID disks. That likely means something like adding a new disk, removing a failed disk, rebuilding parity, resizing volumes, or perhaps even changing the RAID level entirely. My initial thought process now is: what are the likely inputs? A list of disks? The RAID configuration itself? The desired state of the RAID? And, of course, what are the potential outputs? Success/failure codes? Error messages? A modified RAID configuration? Detailed logs?
Now, I'm expecting some pretty low-level operations here, dealing with block devices and metadata. Is it interacting with the kernel's RAID implementation directly, or is this a higher-level abstraction on top of something like `mdadm` or a hardware RAID controller? That has significant implications for how I'd approach debugging or extending this function. I need to think about potential failure scenarios: disk errors, controller failures, power outages mid-operation. What are the rollback mechanisms? Is there proper error handling? What about concurrency? If multiple processes are attempting to modify the RAID at the same time, this needs to be locked properly.
My next step is to look at the function's architecture. What's the flow control? Are there any significant performance considerations? If this is a long-running operation, can it be interrupted gracefully? Does it use transactions to ensure data consistency? And how does it handle atomicity? My guess is that it might use a state machine-type approach, or perhaps a series of discrete steps, each with their own error-handling logic.
Let me start by figuring out where this function lives in the greater scheme of things. How does this fit in with the other related code in this project, and what's the broader system it is running in. I'm going to need to look for documentation, comments, and any test cases associated with this. The testing needs to cover everything from simple single-disk updates to handling catastrophic failures. Ultimately, I need to understand this function's purpose thoroughly before I even *think* about modifying it. I would want to assess the testing, the error conditions and the code style before doing any work.
|
| 324/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:8034 LineCount:45]
Results: map[Contents:8034: static int update_raid_disks(struct mddev *mddev, int raid_disks)
8035: {
8036: int rv;
8037: struct md_rdev *rdev;
8038: /* change the number of raid disks */
8039: if (mddev->pers->check_reshape == NULL)
8040: return -EINVAL;
8041: if (!md_is_rdwr(mddev))
8042: return -EROFS;
8043: if (raid_disks <= 0 ||
8044: (mddev->max_disks && raid_disks >= mddev->max_disks))
8045: return -EINVAL;
8046: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
8047: test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) ||
8048: mddev->reshape_position != MaxSector)
8049: return -EBUSY;
8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
8073:
8074: static int get_cluster_ops(struct mddev *mddev)
8075: {
8076: xa_lock(&md_submodule);
8077: mddev->cluster_ops = xa_load(&md_submodule, ID_CLUSTER);
8078: if (mddev->cluster_ops &&
]
|
| 325/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 40604
output: 37
thoughts: 225
Thoughts: **Analyzing the `update_raid_disks` Function**
Okay, so I'm looking at this `update_raid_disks` function, specifically how it handles potential changes to the number of disks in the RAID array. The core of it seems to be in calculating `mddev->delta_disks`, which is the difference between the target disk count (`raid_disks`) and the current count (`mddev->raid_disks`). It then sets `reshape_backwards` based on whether we're adding or removing disks.
The critical bit here is the call to `mddev->pers->check_reshape(mddev)`. If `check_reshape` *doesn't* return an error (i.e., returns 0), then `delta_disks` will remain as its calculated value, which is not zero, assuming `raid_disks` and `mddev->raid_disks` are different. The function appears to be using the return code of `check_reshape` to understand if the reshape operation is valid. It seems to clear the `delta_disks` and `reshape_backwards` only if `check_reshape` returns an error, which makes sense.
So, the next obvious question is, what exactly does `check_reshape` do within the context of RAID5? I need to understand how that function validates the reshape operation, what checks are performed. I need to dive into the RAID5 implementation. Let's see... looking at `raid5.c:8586` now...
|
| 326/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8586 LineCount:50]
Results: map[Contents:8586: static int check_reshape(struct mddev *mddev)
8587: {
8588: struct r5conf *conf = mddev->private;
8589:
8590: if (raid5_has_log(conf) || raid5_has_ppl(conf))
8591: return -EINVAL;
8592: if (mddev->delta_disks == 0 &&
8593: mddev->new_layout == mddev->layout &&
8594: mddev->new_chunk_sectors == mddev->chunk_sectors)
8595: return 0; /* nothing to do */
8596: if (has_failed(conf))
8597: return -EINVAL;
8598: if (!mddev->new_chunk_sectors)
8599: return -EINVAL;
8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
8601: /* We might be able to shrink, but the devices must
8602: * be made bigger first.
8603: * For raid6, 4 is the minimum size.
8604: * Otherwise 2 is the minimum
8605: */
8606: int min = 2;
8607: if (mddev->level == 6)
8608: min = 4;
8609: if (mddev->raid_disks + mddev->delta_disks < min)
8610: return -EINVAL;
8611: }
8612:
8613: if (!check_stripe_cache(mddev))
8614: return -ENOSPC;
8615:
8616: if (mddev->bitmap_id == ID_LLBITMAP &&
8617: mddev->new_chunk_sectors < mddev->chunk_sectors)
8618: return -EOPNOTSUPP;
8619: if (mddev->new_chunk_sectors > mddev->chunk_sectors ||
8620: mddev->delta_disks > 0)
8621: if (resize_chunks(conf,
8622: conf->previous_raid_disks
8623: + max(0, mddev->delta_disks),
8624: max(mddev->new_chunk_sectors,
8625: mddev->chunk_sectors)
8626: ) < 0)
8627: return -ENOMEM;
8628:
8629: if (conf->previous_raid_disks + mddev->delta_disks <= conf->pool_size)
8630: return 0; /* never bother to shrink */
8631: return resize_stripes(conf, (conf->previous_raid_disks
8632: + mddev->delta_disks));
8633: }
8634:
8635: static int raid5_start_reshape(struct mddev *mddev)
]
|
| 327/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 42031
output: 37
thoughts: 18
Thoughts: Okay, here's my interpretation of what I would be thinking, formatted as requested:
**Deconstructing `raid5_start_reshape`**
Alright, so the task at hand is to understand the purpose of `raid5_start_reshape`. My immediate instinct, given my experience, is to dive right into the code itself. "What *exactly* does this function do?" is the question burning in my mind. No abstract concepts or theories at this point, I want the nuts and bolts. Let's get down to brass tacks and dissect its implementation. The name itself suggests we're dealing with RAID5 reshaping, but the devil, as always, is in the details, so let's start reading.
|
| 328/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8635 LineCount:70]
Results: map[Contents:8635: static int raid5_start_reshape(struct mddev *mddev)
8636: {
8637: struct r5conf *conf = mddev->private;
8638: struct md_rdev *rdev;
8639: int spares = 0;
8640: int i;
8641: unsigned long flags;
8642:
8643: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
8644: return -EBUSY;
8645:
8646: if (!mddev->new_chunk_sectors)
8647: return -EINVAL;
8648:
8649: if (!check_stripe_cache(mddev))
8650: return -ENOSPC;
8651:
8652: if (has_failed(conf))
8653: return -EINVAL;
8654:
8655: /* raid5 can't handle concurrent reshape and recovery */
8656: if (mddev->resync_offset < MaxSector)
8657: return -EBUSY;
8658: for (i = 0; i < conf->raid_disks; i++)
8659: if (conf->disks[i].replacement)
8660: return -EBUSY;
8661:
8662: rdev_for_each(rdev, mddev) {
8663: if (!test_bit(In_sync, &rdev->flags)
8664: && !test_bit(Faulty, &rdev->flags))
8665: spares++;
8666: }
8667:
8668: if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
8669: /* Not enough devices even to make a degraded array
8670: * of that size
8671: */
8672: return -EINVAL;
8673:
8674: /* Refuse to reduce size of the array. Any reductions in
8675: * array size must be through explicit setting of array_size
8676: * attribute.
8677: */
8678: if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
8679: < mddev->array_sectors) {
8680: pr_warn("md/raid:%s: array size must be reduced before number of disks\n",
8681: mdname(mddev));
8682: return -EINVAL;
8683: }
8684: if (md_bitmap_enabled(mddev, false) &&
8685: mddev->bitmap_id == ID_LLBITMAP) {
8686: i = mddev->bitmap_ops->resize(mddev, mddev->dev_sectors, 0);
8687: if (i)
8688: return i;
8689: }
8690:
8691: atomic_set(&conf->reshape_stripes, 0);
8692: spin_lock_irq(&conf->device_lock);
8693: write_seqcount_begin(&conf->gen_lock);
8694: conf->previous_raid_disks = conf->raid_disks;
8695: conf->raid_disks += mddev->delta_disks;
8696: conf->prev_chunk_sectors = conf->chunk_sectors;
8697: conf->chunk_sectors = mddev->new_chunk_sectors;
8698: conf->prev_algo = conf->algorithm;
8699: conf->algorithm = mddev->new_layout;
8700: conf->generation++;
8701: /* Code that selects data_offset needs to see the generation update
8702: * if reshape_progress has been set - so a memory barrier needed.
8703: */
8704: smp_mb();
]
|
| 329/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 43346
output: 37
thoughts: 13
Thoughts: Okay, I'm ready. Here's a summary as if I'm processing the provided text, assuming I'm an expert in the field:
**Initial Assessment and Cognitive Framing**
Alright, let's dive into this. Based on those line numbers, I'm expecting a specific, likely technical, section within a larger body of work. I'm immediately trying to establish context: What are the relevant concepts? What prior knowledge do I need to recall to effectively process this particular section? I'm anticipating detail β likely equations, procedures, or critical arguments. I need to quickly determine the focus to assess its value and how it fits into the broader scope of research and thought. Let's see if this lines up with my area of expertise. I'm bracing myself for a focused, technical evaluation.
|
| 330/5 |
2026/09/09 21:16 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid5.c FirstLine:8745 LineCount:25]
Results: map[Contents:8745: }
8746:
8747: /* When a reshape changes the number of devices,
8748: * ->degraded is measured against the larger of the
8749: * pre and post number of devices.
8750: */
8751: spin_lock_irqsave(&conf->device_lock, flags);
8752: mddev->degraded = raid5_calc_degraded(conf);
8753: spin_unlock_irqrestore(&conf->device_lock, flags);
8754: }
8755: mddev->raid_disks = conf->raid_disks;
8756: mddev->reshape_position = conf->reshape_progress;
8757: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
8758:
8759: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
8760: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
8761: clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
8762: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
8763: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
8764: conf->reshape_checkpoint = jiffies;
8765: md_new_event();
8766: return 0;
8767: }
8768:
8769: /* This is called from the reshape thread and should make any
]
|
| 331/5 |
2026/09/09 21:16 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 44002
output: 27
thoughts: 215
Thoughts: **My Analysis of the RAID5 Reshape Process and Stop Behavior**
Okay, let's break this down. First, `raid5_start_reshape` is crucial. It initializes the reshape position with `mddev->reshape_position = conf->reshape_progress;`. This is the starting point, whether it's zero or `dev_sectors`, based on the reshape direction. But, critically, before `raid5_start_reshape` even gets called β that is, until the sync thread handles `MD_RECOVERY_RESHAPE` or some `sync_action` pathway kicks off β `mddev->reshape_position` is stuck at `MaxSector`! That's the default and it indicates that reshape is *not* active.
Now, I need to understand what happens if a user tries to halt the array *before* the reshape actually begins. I've got to look at `do_md_stop` because that's where the shutdown logic lies. I see there are different stop modes, like "stop but don't disassemble," "stop," and "readonly." But the important question is how does this interact with the reshape?
Wait a second, let me zoom out and look at `do_md_stop` again. I need to trace all the calls to `__md_stop`. Let's see, which files call `__md_stop` from `md.c`? Gotta understand the context of the stop command fully, especially during this reshape period when the `mddev->reshape_position` isn't properly initialized. This should reveal the potential for incomplete reshape handling during stop and how the metadata is potentially affected.
|
| 332/5 |
2026/09/09 21:17 |
tool |
grepper |
0m
Args: map[Expression:__md_stop PathPrefix:drivers/md]
Results: map[Output:drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-7031-
drivers/md/md.c:7032:static void __md_stop_writes(struct mddev *mddev)
drivers/md/md.c-7033-{
--
drivers/md/md.c=7059=void md_stop_writes(struct mddev *mddev)
--
drivers/md/md.c-7063- stop_sync_thread(mddev, true);
drivers/md/md.c:7064: __md_stop_writes(mddev);
drivers/md/md.c-7065- mddev_unlock(mddev);
--
drivers/md/md.c=7069=static void mddev_detach(struct mddev *mddev)
--
drivers/md/md.c-7083-
drivers/md/md.c:7084:static void __md_stop(struct mddev *mddev)
drivers/md/md.c-7085-{
--
drivers/md/md.c=7100=void md_stop(struct mddev *mddev)
--
drivers/md/md.c-7106- */
drivers/md/md.c:7107: __md_stop_writes(mddev);
drivers/md/md.c:7108: __md_stop(mddev);
drivers/md/md.c-7109-}
--
drivers/md/md.c=7114=static int md_set_readonly(struct mddev *mddev)
--
drivers/md/md.c-7137-
drivers/md/md.c:7138: __md_stop_writes(mddev);
drivers/md/md.c-7139-
--
drivers/md/md.c=7162=static int do_md_stop(struct mddev *mddev, int mode)
--
drivers/md/md.c-7191-
drivers/md/md.c:7192: __md_stop_writes(mddev);
drivers/md/md.c:7193: __md_stop(mddev);
drivers/md/md.c-7194-
--
drivers/md/md.c=10714=static int md_notify_reboot(struct notifier_block *this,
--
drivers/md/md.c-10725- if (mddev->pers)
drivers/md/md.c:10726: __md_stop_writes(mddev);
drivers/md/md.c-10727- if (mddev->persistent)
]
|
| 333/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 45301
output: 36
thoughts: 622
Thoughts: **My Deep Dive into MD Array Stopping**
Okay, so I'm looking at how MD arrays are stopped, specifically focusing on the interactions between `__md_stop`, `do_md_stop`, and ultimately, `md_clean`. `__md_stop` is clearly a critical function, called from multiple places, so understanding its behavior is key. I'm particularly interested in what happens with `do_md_stop` when `mode` is 0 and 2.
When `mode == 0`, we have the "final stop" path. It seems pretty straightforward: call `__md_stop` to begin the shutdown sequence, and then call `md_clean`. That makes sense. Then the array is exported, and finally, cleaned. Looking at `md_clean`, it resets various parameters: `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`. This seems like it's designed to thoroughly reset the `mddev` structure to a known, pristine state, clearing out any lingering configuration data from the array before removing it.
Now, here's where things get interesting. If `mode == 2`, `md_clean` is *not* called. That jumps out at me immediately. Why? Aha, because `mode == 2` signifies a "stop but do not disassemble array" state β that "inactive" state. So, the disks are still attached, but the array is, essentially, idle. The array's data structures are preserved but disabled. This makes a lot of sense. The point of stopping is more like going "offline" than a full dismantle.
So, the next question is, what happens to the state of `mddev` when the array is assembled or loaded from the disks or when it is set to inactive? The superblocks must tell us more about that. I need to understand how the `mddev` struct is populated and what is persistent. Let's look at `super_1_validate` and `super_90_validate`. The answers must be in those validate functions.
|
| 334/5 |
2026/09/09 21:17 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:2050 LineCount:30]
Results: map[Contents:2050: mddev->bitmap_info.space =
2051: -mddev->bitmap_info.offset;
2052: }
2053:
2054: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2057: mddev->new_level = le32_to_cpu(sb->new_level);
2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
2063: & MD_FEATURE_RESHAPE_BACKWARDS)))
2064: mddev->reshape_backwards = 1;
2065: } else {
2066: mddev->reshape_position = MaxSector;
2067: mddev->delta_disks = 0;
2068: mddev->new_level = mddev->level;
2069: mddev->new_layout = mddev->layout;
2070: mddev->new_chunk_sectors = mddev->chunk_sectors;
2071: }
2072:
2073: if (mddev->level == 0 &&
2074: !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT))
2075: mddev->layout = -1;
2076:
2077: if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL)
2078: set_bit(MD_HAS_JOURNAL, &mddev->flags);
2079:
]
|
| 335/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 47014
output: 28
thoughts: 925
Thoughts: **Analyzing Reshape State During Array Stop**
Okay, let's break this down. I'm looking at how the reshape process is handled in the MD driver, specifically during an array stop. My initial focus is on the state variables related to reshaping.
I see that `super_1_validate` and `super_90_validate` are responsible for validating and initializing reshape-related metadata from the superblock. These functions are key to understanding the on-disk format and how reshape parameters are loaded. I'm noting the logic within these functions: if a reshape is active (indicated by a feature flag or a minor version check), the reshape parameters such as `reshape_position`, `delta_disks`, `new_level`, `new_layout`, and `new_chunk_sectors` are loaded from the superblock. Otherwise, the reshape parameters are reset to default values (`MaxSector` for `reshape_position`, etc.), effectively indicating that no reshape is active.
Now, I'm examining the proposed patch. The addition within `__md_stop` is interesting. The patch *resets* these reshape parameters if `mddev->reshape_position == MaxSector`. This makes sense, as a `MaxSector` value for `reshape_position` indicates reshape isn't active.
But... hang on. What if `mddev->reshape_position` is *not* `MaxSector`? That implies a reshape *was* in progress when the array stopped! That's the critical point. Could an array actually be stopped mid-reshape? This triggers an immediate question: is this a supported state? What happens when we re-start the array?
To understand this, I need to check how the reshape state is handled when the array is stopped. I've noted that `do_md_stop` calls `stop_sync_thread(mddev, true);`. I need to dig into `stop_sync_thread` to see what happens to `reshape_position` and the other reshape variables during the stop operation. Specifically, I need to know what happens during a reshape, and whether or not that state is preserved or handled. I need to understand whether this is expected, or if there's a potential for data corruption or inconsistencies if a reshape is interrupted this way. I have a feeling I'm about to uncover something interesting here.
|
| 336/5 |
2026/09/09 21:17 |
tool |
grepper |
0m
Args: map[Expression:stop_sync_thread PathPrefix:drivers/md]
Results: map[Output:drivers/md/md.c=5169=action_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-5176-/**
drivers/md/md.c:5177: * stop_sync_thread() - wait for sync_thread to stop if it's running.
drivers/md/md.c-5178- * @mddev: the array.
--
drivers/md/md.c-5182- */
drivers/md/md.c:5183:static void stop_sync_thread(struct mddev *mddev, bool locked)
drivers/md/md.c-5184-{
--
drivers/md/md.c=5213=void md_idle_sync_thread(struct mddev *mddev)
--
drivers/md/md.c-5217- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5218: stop_sync_thread(mddev, true);
drivers/md/md.c-5219-}
--
drivers/md/md.c=5222=void md_frozen_sync_thread(struct mddev *mddev)
--
drivers/md/md.c-5226- set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5227: stop_sync_thread(mddev, true);
drivers/md/md.c-5228-}
--
drivers/md/md.c=7059=void md_stop_writes(struct mddev *mddev)
--
drivers/md/md.c-7062- set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:7063: stop_sync_thread(mddev, true);
drivers/md/md.c-7064- __md_stop_writes(mddev);
--
drivers/md/md.c=7114=static int md_set_readonly(struct mddev *mddev)
--
drivers/md/md.c-7126-
drivers/md/md.c:7127: stop_sync_thread(mddev, false);
drivers/md/md.c-7128- wait_event(mddev->sb_wait,
--
drivers/md/md.c=7162=static int do_md_stop(struct mddev *mddev, int mode)
--
drivers/md/md.c-7172-
drivers/md/md.c:7173: stop_sync_thread(mddev, true);
drivers/md/md.c-7174-
]
|
| 337/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 49163
output: 26
thoughts: 538
Thoughts: **Reshape Restart & Logic Flow**
Okay, let's break this down. I need to understand what happens when a reshape is paused and resumed. My initial thought is, if a reshape *was* in progress when the process was halted, `reshape_position` shouldn't be equal to `MaxSector`. That's because the reshape status (position, disk delta, new level, layout, etc.) should have been written to the superblock.
The tricky part comes in when the array is deactivated with `mode == 2`. It looks like those reshape fields aren't cleared. So, when the array restarts with `pers->run(mddev)` β specifically, let's say `raid5_run` β it *will* see `mddev->reshape_position != MaxSector`, and it will resume.
But, if `reshape_position == MaxSector`, it means no reshape was active, right? So, then, the question becomes: why and when does `mddev->delta_disks` get set in the first place? That seems critical.
Okay, let's follow the code flow when `update_raid_disks` is called.
The code checks if the `mddev->pers` is non-NULL. If the `mddev->pers` is non-NULL and if the desired number of raid disks is different from the current number, then `update_raid_disks` is called. But, if `mddev->pers` *is* NULL (and thus, reshape is not in progress) it will check if `reshape_position != MaxSector`. This feels like it might be a key to understanding what's going on.
Inside `update_raid_disks`: We see `mddev->delta_disks` being calculated. That determines if we are adding or subtracting disks, and sets `mddev->reshape_backwards`. And then, critically, it calls `mddev->pers->check_reshape(mddev)`. If `check_reshape` returns an error, `delta_disks` and `reshape_backwards` are reset.
Now, what does `check_reshape` *actually* do? Let's look at `raid5_check_reshape` in `raid5.c`.
It *doesn't* appear to start the reshape itself. Instead, it checks if the reshape operation is possible, and it allocates stripe cache if it's needed (like through `resize_chunks` / `resize_stripes`).
So, if `check_reshape` doesn't *start* the reshape, what *does*? I need to find where `pers->start_reshape` is actually called. Let's do a search for that function now to complete the picture.
|
| 338/5 |
2026/09/09 21:17 |
tool |
grepper |
0m
Args: map[Expression:start_reshape PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3301-
drivers/md/dm-raid.c:3302: if (rs->md.pers->start_reshape) {
drivers/md/dm-raid.c-3303- r = rs->md.pers->check_reshape(&rs->md);
--
drivers/md/dm-raid.c=3978=static void rs_update_sbs(struct raid_set *rs)
--
drivers/md/dm-raid.c-3995- */
drivers/md/dm-raid.c:3996:static int rs_start_reshape(struct raid_set *rs)
drivers/md/dm-raid.c-3997-{
--
drivers/md/dm-raid.c-4011- *
drivers/md/dm-raid.c:4012: * May as well already kick the reshape off so that * pers->start_reshape() becomes optional.
drivers/md/dm-raid.c-4013- */
--
drivers/md/dm-raid.c-4023- */
drivers/md/dm-raid.c:4024: if (pers->start_reshape) {
drivers/md/dm-raid.c:4025: r = pers->start_reshape(mddev);
drivers/md/dm-raid.c-4026- if (r) {
drivers/md/dm-raid.c:4027: rs->ti->error = "pers->start_reshape() failed";
drivers/md/dm-raid.c-4028- return r;
--
drivers/md/dm-raid.c=4042=static int raid_preresume(struct dm_target *ti)
--
drivers/md/dm-raid.c-4106- mddev_lock_nointr(mddev);
drivers/md/dm-raid.c:4107: r = rs_start_reshape(rs);
drivers/md/dm-raid.c-4108- mddev_unlock(mddev);
--
drivers/md/md.c=5240=EXPORT_SYMBOL_GPL(md_unfrozen_sync_thread);
drivers/md/md.c-5241-
drivers/md/md.c:5242:static int mddev_start_reshape(struct mddev *mddev)
drivers/md/md.c-5243-{
--
drivers/md/md.c-5245-
drivers/md/md.c:5246: if (mddev->pers->start_reshape == NULL)
drivers/md/md.c-5247- return -EINVAL;
--
drivers/md/md.c-5252- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5253: ret = mddev->pers->start_reshape(mddev);
drivers/md/md.c-5254- if (ret)
--
drivers/md/md.c=5270=action_store(struct mddev *mddev, const char *page, size_t len)
--
drivers/md/md.c-5328- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
drivers/md/md.c:5329: ret = mddev_start_reshape(mddev);
drivers/md/md.c-5330- if (ret)
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6736- if (mddev->reshape_position != MaxSector &&
drivers/md/md.c:6737: pers->start_reshape == NULL) {
drivers/md/md.c-6738- /* This personality cannot handle reshaping... */
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10886- * reshape is happening in the remote node, we need to
drivers/md/md.c:10887: * update reshape_position and call start_reshape.
drivers/md/md.c-10888- */
--
drivers/md/md.c-10891- mddev->pers->update_reshape_pos(mddev);
drivers/md/md.c:10892: if (mddev->pers->start_reshape)
drivers/md/md.c:10893: mddev->pers->start_reshape(mddev);
drivers/md/md.c-10894- } else if (test_bit(MD_RESYNCING_REMOTE, &mddev->recovery) &&
--
drivers/md/md.h=750=struct md_personality
--
drivers/md/md.h-775- int (*check_reshape) (struct mddev *mddev);
drivers/md/md.h:776: int (*start_reshape) (struct mddev *mddev);
drivers/md/md.h-777- void (*finish_reshape) (struct mddev *mddev);
--
drivers/md/raid10.c=4303=static int calc_degraded(struct r10conf *conf)
--
drivers/md/raid10.c-4344-
drivers/md/raid10.c:4345:static int raid10_start_reshape(struct mddev *mddev)
drivers/md/raid10.c-4346-{
--
drivers/md/raid10.c=5091=static struct md_personality raid10_personality =
--
drivers/md/raid10.c-5113- .check_reshape = raid10_check_reshape,
drivers/md/raid10.c:5114: .start_reshape = raid10_start_reshape,
drivers/md/raid10.c-5115- .finish_reshape = raid10_finish_reshape,
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8634-
drivers/md/raid5.c:8635:static int raid5_start_reshape(struct mddev *mddev)
drivers/md/raid5.c-8636-{
--
drivers/md/raid5.c=9217=static struct md_personality raid6_personality =
--
drivers/md/raid5.c-9238- .check_reshape = raid6_check_reshape,
drivers/md/raid5.c:9239: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9240- .finish_reshape = raid5_finish_reshape,
--
drivers/md/raid5.c=9250=static struct md_personality raid5_personality =
--
drivers/md/raid5.c-9271- .check_reshape = raid5_check_reshape,
drivers/md/raid5.c:9272: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9273- .finish_reshape = raid5_finish_reshape,
--
drivers/md/raid5.c=9284=static struct md_personality raid4_personality =
--
drivers/md/raid5.c-9305- .check_reshape = raid5_check_reshape,
drivers/md/raid5.c:9306: .start_reshape = raid5_start_reshape,
drivers/md/raid5.c-9307- .finish_reshape = raid5_finish_reshape,
]
|
| 339/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 52357
output: 37
thoughts: 195
Thoughts: **Analyzing the Reshape Process in the Linux MD Driver**
Alright, let's dive into this `mddev_start_reshape` function. I see we're looking at `drivers/md/md.c:5242`. The core of reshaping seems to hinge on the `mddev->pers->start_reshape` function pointer. Makes sense, that's where the actual reshape logic resides. Now, the first check is crucial: if `start_reshape` isn't defined by the particular personality (`mddev->pers`), we bail out with an error. Logical.
Then there's a guard to prevent an early call, with conditions involving `reshape_position`, `check_reshape`, and whether the device is read/writeable. So, we make a call to the `start_reshape` implementation.
But I need the bigger picture... Where else does this `start_reshape` function get triggered? I need to understand the control flow. Let's see... I'll check `md_choose_sync_action` at line 10209. That's likely where the decision to *initiate* the reshape might be made, or perhaps itβs part of recovery or resync. Letβs see how it connects...
|
| 340/5 |
2026/09/09 21:17 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:10205 LineCount:40]
Results: map[Contents:10205: set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
10206: return spares;
10207: }
10208:
10209: static bool md_choose_sync_action(struct mddev *mddev, int *spares)
10210: {
10211: /* Check if reshape is in progress first. */
10212: if (mddev->reshape_position != MaxSector) {
10213: if (mddev->pers->check_reshape == NULL ||
10214: mddev->pers->check_reshape(mddev) != 0)
10215: return false;
10216:
10217: set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
10218: clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
10219: clear_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery);
10220: return true;
10221: }
10222:
10223: /* Check if resync is in progress. */
10224: if (mddev->resync_offset < MaxSector) {
10225: remove_spares(mddev, NULL);
10226: set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
10227: clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
10228: clear_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery);
10229: return true;
10230: }
10231:
10232: /*
10233: * Remove any failed drives, then add spares if possible. Spares are
10234: * also removed and re-added, to allow the personality to fail the
10235: * re-add.
10236: */
10237: *spares = remove_and_add_spares(mddev, NULL);
10238: if (*spares || test_bit(MD_RECOVERY_LAZY_RECOVER, &mddev->recovery)) {
10239: clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
10240: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
10241: clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
10242:
10243: /* Start new recovery. */
10244: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
]
|
| 341/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 53609
output: 26
thoughts: 311
Thoughts: **My Analysis of the `md_choose_sync_action` Function and Reshape Process**
Okay, let's dive into this `md_choose_sync_action` function. I see it's only checking if `mddev->reshape_position` is not `MaxSector`. That's interesting. So, when a user writes "reshape" to the `sync_action` sysfs entry, the system calls `mddev_start_reshape(mddev)`. And that function, in turn, calls `pers->start_reshape(mddev)`. Right, and then `raid5_start_reshape` *finally* sets `mddev->reshape_position` to `conf->reshape_progress`. It's critical I remember this: *nothing* actually starts until the "reshape" is written to `sync_action`. It's a manual trigger.
But...wait a second. Is there a scenario where `sync_action` might be started automatically? I need to clarify that.
Okay, back to `mddev_start_reshape`. It checks for `mddev->pers->start_reshape == NULL`, then `mddev->reshape_position == MaxSector`, or `mddev->pers->check_reshape == NULL`, and finally, `!md_is_rdwr(mddev)`. If any of those are true, it clears `MD_RECOVERY_FROZEN` and calls `mddev->pers->start_reshape(mddev)`.
Wait, this `check_reshape` member is being used. Where is `check_reshape` called in the kernel? I need to search for all instances of it to understand the full picture of the reshape process. Let's start with a thorough search.
|
| 342/5 |
2026/09/09 21:17 |
tool |
grepper |
0m
Args: map[Expression:check_reshape PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=1954=struct dm_raid_superblock {
--
drivers/md/dm-raid.c-2040- */
drivers/md/dm-raid.c:2041:static int rs_check_reshape(struct raid_set *rs)
drivers/md/dm-raid.c-2042-{
--
drivers/md/dm-raid.c-2044-
drivers/md/dm-raid.c:2045: if (!mddev->pers || !mddev->pers->check_reshape)
drivers/md/dm-raid.c-2046- rs->ti->error = "Reshape not supported";
--
drivers/md/dm-raid.c=3011=static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
--
drivers/md/dm-raid.c-3294- if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) {
drivers/md/dm-raid.c:3295: r = rs_check_reshape(rs);
drivers/md/dm-raid.c-3296- if (r)
--
drivers/md/dm-raid.c-3302- if (rs->md.pers->start_reshape) {
drivers/md/dm-raid.c:3303: r = rs->md.pers->check_reshape(&rs->md);
drivers/md/dm-raid.c-3304- if (r) {
--
drivers/md/dm-raid.c=3996=static int rs_start_reshape(struct raid_set *rs)
--
drivers/md/dm-raid.c-4013- */
drivers/md/dm-raid.c:4014: r = pers->check_reshape(mddev);
drivers/md/dm-raid.c-4015- if (r) {
drivers/md/dm-raid.c:4016: rs->ti->error = "pers->check_reshape() failed";
drivers/md/dm-raid.c-4017- return r;
--
drivers/md/dm-raid.c-4021- * Personality may not provide start reshape method in which
drivers/md/dm-raid.c:4022: * case check_reshape above has already covered everything
drivers/md/dm-raid.c-4023- */
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4380- if (mddev->pers) {
drivers/md/md.c:4381: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-4382- err = -EBUSY;
--
drivers/md/md.c-4386- mddev->new_layout = n;
drivers/md/md.c:4387: err = mddev->pers->check_reshape(mddev);
drivers/md/md.c-4388- if (err)
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4493- if (mddev->pers) {
drivers/md/md.c:4494: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-4495- err = -EBUSY;
--
drivers/md/md.c-4499- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4500: err = mddev->pers->check_reshape(mddev);
drivers/md/md.c-4501- if (err)
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5249- if (mddev->reshape_position == MaxSector ||
drivers/md/md.c:5250: mddev->pers->check_reshape == NULL ||
drivers/md/md.c:5251: mddev->pers->check_reshape(mddev)) {
drivers/md/md.c-5252- clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
--
drivers/md/md.c=8034=static int update_raid_disks(struct mddev *mddev, int raid_disks)
--
drivers/md/md.c-8038- /* change the number of raid disks */
drivers/md/md.c:8039: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-8040- return -EINVAL;
--
drivers/md/md.c-8065-
drivers/md/md.c:8066: rv = mddev->pers->check_reshape(mddev);
drivers/md/md.c-8067- if (rv < 0) {
--
drivers/md/md.c=8104=static int update_array_info(struct mddev *mddev, mdu_array_info_t *info)
--
drivers/md/md.c-8144- */
drivers/md/md.c:8145: if (mddev->pers->check_reshape == NULL)
drivers/md/md.c-8146- return -EINVAL;
--
drivers/md/md.c-8148- mddev->new_layout = info->layout;
drivers/md/md.c:8149: rv = mddev->pers->check_reshape(mddev);
drivers/md/md.c-8150- if (rv)
--
drivers/md/md.c=10209=static bool md_choose_sync_action(struct mddev *mddev, int *spares)
--
drivers/md/md.c-10212- if (mddev->reshape_position != MaxSector) {
drivers/md/md.c:10213: if (mddev->pers->check_reshape == NULL ||
drivers/md/md.c:10214: mddev->pers->check_reshape(mddev) != 0)
drivers/md/md.c-10215- return false;
--
drivers/md/md.h=750=struct md_personality
--
drivers/md/md.h-774- sector_t (*size) (struct mddev *mddev, sector_t sectors, int raid_disks);
drivers/md/md.h:775: int (*check_reshape) (struct mddev *mddev);
drivers/md/md.h-776- int (*start_reshape) (struct mddev *mddev);
--
drivers/md/raid1.c=3441=static struct md_personality raid1_personality =
--
drivers/md/raid1.c-3460- .size = raid1_size,
drivers/md/raid1.c:3461: .check_reshape = raid1_reshape,
drivers/md/raid1.c-3462- .quiesce = raid1_quiesce,
--
drivers/md/raid10.c=4215=static void *raid10_takeover(struct mddev *mddev)
--
drivers/md/raid10.c-4236-
drivers/md/raid10.c:4237:static int raid10_check_reshape(struct mddev *mddev)
drivers/md/raid10.c-4238-{
--
drivers/md/raid10.c=5091=static struct md_personality raid10_personality =
--
drivers/md/raid10.c-5112- .takeover = raid10_takeover,
drivers/md/raid10.c:5113: .check_reshape = raid10_check_reshape,
drivers/md/raid10.c-5114- .start_reshape = raid10_start_reshape,
--
drivers/md/raid5.c=8562=static int check_stripe_cache(struct mddev *mddev)
--
drivers/md/raid5.c-8585-
drivers/md/raid5.c:8586:static int check_reshape(struct mddev *mddev)
drivers/md/raid5.c-8587-{
--
drivers/md/raid5.c=8941=static void *raid5_takeover_raid6(struct mddev *mddev)
--
drivers/md/raid5.c-8973-
drivers/md/raid5.c:8974:static int raid5_check_reshape(struct mddev *mddev)
drivers/md/raid5.c-8975-{
--
drivers/md/raid5.c-9010- }
drivers/md/raid5.c:9011: return check_reshape(mddev);
drivers/md/raid5.c-9012-}
drivers/md/raid5.c-9013-
drivers/md/raid5.c:9014:static int raid6_check_reshape(struct mddev *mddev)
drivers/md/raid5.c-9015-{
--
drivers/md/raid5.c-9030- /* They look valid */
drivers/md/raid5.c:9031: return check_reshape(mddev);
drivers/md/raid5.c-9032-}
--
drivers/md/raid5.c=9217=static struct md_personality raid6_personality =
--
drivers/md/raid5.c-9237- .size = raid5_size,
drivers/md/raid5.c:9238: .check_reshape = raid6_check_reshape,
drivers/md/raid5.c-9239- .start_reshape = raid5_start_reshape,
--
drivers/md/raid5.c=9250=static struct md_personality raid5_personality =
--
drivers/md/raid5.c-9270- .size = raid5_size,
drivers/md/raid5.c:9271: .check_reshape = raid5_check_reshape,
drivers/md/raid5.c-9272- .start_reshape = raid5_start_reshape,
--
drivers/md/raid5.c=9284=static struct md_personality raid4_personality =
--
drivers/md/raid5.c-9304- .size = raid5_size,
drivers/md/raid5.c:9305: .check_reshape = raid5_check_reshape,
drivers/md/raid5.c-9306- .start_reshape = raid5_start_reshape,
]
|
| 343/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 57150
output: 36
thoughts: 143
Thoughts: **Analyzing the `check_reshape` Call in `md.c`**
Okay, let's dissect this `check_reshape` situation in `md.c`. I need to understand the nuances of how this function is used, especially within the context of reshaping. First, I'll examine where `check_reshape` is called. Ah, here's one instance in `layout_store`.
Alright, so here's the relevant snippet:
```c
mddev->new_layout = n;
err = mddev->pers->check_reshape(mddev);
if (err)
mddev->new_layout = mddev->layout;
```
Interesting... if `check_reshape` returns successfully, `mddev->new_layout` is updated to `n`. However, the conditional logic hints at a crucial point. If `reshape_position` is equal to `MaxSector`, which implies the reshape hasn't actually *started* yet, then `mddev->layout = n;` is set. This looks important. Now, I need to understand this logic better. Let me get the full context of `layout_store` and see what's really happening.
|
| 344/5 |
2026/09/09 21:17 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4365 LineCount:40]
Results: map[Contents:4365: }
4366:
4367: static ssize_t
4368: layout_store(struct mddev *mddev, const char *buf, size_t len)
4369: {
4370: unsigned int n;
4371: int err;
4372:
4373: err = kstrtouint(buf, 10, &n);
4374: if (err < 0)
4375: return err;
4376: err = mddev_lock(mddev);
4377: if (err)
4378: return err;
4379:
4380: if (mddev->pers) {
4381: if (mddev->pers->check_reshape == NULL)
4382: err = -EBUSY;
4383: else if (!md_is_rdwr(mddev))
4384: err = -EROFS;
4385: else {
4386: mddev->new_layout = n;
4387: err = mddev->pers->check_reshape(mddev);
4388: if (err)
4389: mddev->new_layout = mddev->layout;
4390: }
4391: } else {
4392: mddev->new_layout = n;
4393: if (mddev->reshape_position == MaxSector)
4394: mddev->layout = n;
4395: }
4396: mddev_unlock(mddev);
4397: return err ?: len;
4398: }
4399: static struct md_sysfs_entry md_layout =
4400: __ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
4401:
4402: static ssize_t
4403: raid_disks_show(struct mddev *mddev, char *page)
4404: {
]
|
| 345/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 58151
output: 36
thoughts: 172
Thoughts: **Analyzing Layout and Chunk Size Changes in a RAID Device**
Okay, let's break down this code snippet. I see we're dealing with a storage layout update, likely within a RAID device (`mddev`). First, I check if `mddev->pers` is valid. This points to the RAID personality in use. If it *is* set, which means the device is currently configured with a specific RAID personality, there's some interesting logic here.
First, I check for a `check_reshape` function pointer within the personality structure. A `NULL` pointer usually indicates the RAID personality is busy or not ready for reshaping, so I return `-EBUSY`. Then I check if the device is read-write accessible. If it isn't (read-only), I return `-EROFS` because changing the layout is an inherently write operation.
Now, here's where things get interesting in the `if` block. If we pass the read/write check, I'm setting `mddev->new_layout = n;`. Crucially, I immediately notice that *`mddev->layout` itself isn't immediately modified!* The new layout is only temporarily stored. I then call the `check_reshape` function. This function almost certainly validates the proposed layout change. If `check_reshape` returns an error (`err`), `mddev->new_layout` is reverted to the old `mddev->layout` value. This is a crucial rollback mechanism.
This tells me the architecture is designed with a safe, transactional approach. It tentatively applies the new layout, validates it, and only if the validation succeeds, is the new layout accepted. The `check_reshape` is obviously the key to safe RAID layout changes, preventing data corruption. I need to look closely at its implementation to determine its checks. The rollback indicates that it likely performs checks on disk space, redundancy, and potentially data integrity given the new layout.
It seems like there's more code to be examined, probably for the case when `mddev->pers` *isn't* set, but I need to understand this logic completely before proceeding.
|
| 346/5 |
2026/09/09 21:17 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4480 LineCount:35]
Results: map[Contents:4480: static ssize_t
4481: chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
4482: {
4483: unsigned long n;
4484: int err;
4485:
4486: err = kstrtoul(buf, 10, &n);
4487: if (err < 0)
4488: return err;
4489:
4490: err = mddev_lock(mddev);
4491: if (err)
4492: return err;
4493: if (mddev->pers) {
4494: if (mddev->pers->check_reshape == NULL)
4495: err = -EBUSY;
4496: else if (!md_is_rdwr(mddev))
4497: err = -EROFS;
4498: else {
4499: mddev->new_chunk_sectors = n >> 9;
4500: err = mddev->pers->check_reshape(mddev);
4501: if (err)
4502: mddev->new_chunk_sectors = mddev->chunk_sectors;
4503: }
4504: } else {
4505: mddev->new_chunk_sectors = n >> 9;
4506: if (mddev->reshape_position == MaxSector)
4507: mddev->chunk_sectors = n >> 9;
4508: }
4509: mddev_unlock(mddev);
4510: return err ?: len;
4511: }
4512: static struct md_sysfs_entry md_chunk_size =
4513: __ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
4514:
]
|
| 347/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 59342
output: 36
thoughts: 54
Thoughts: **Analyzing Chunk Size and Level in the Storage Subsystem**
Okay, let's dive in. I need to examine this `chunk_size_store` variable. My immediate concern is whether or not `mddev->pers` is initialized. If it is, then the code sets `mddev->new_chunk_sectors` to `n >> 9`. This looks like a bit-shift to effectively divide by 512, which would imply that `n` represents a chunk size in bytes, and we're converting it to sectors. That makes sense, assuming this relates to metadata or disk access.
Now, what about `level_store`? I need to check how that is handled. I need to understand how these values interact, how the chunk size and level are being set or modified. Understanding the interaction here will be key to understanding the storage strategy and potential performance implications. Let's see how `level_store` is defined and used.
|
| 348/5 |
2026/09/09 21:17 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4075 LineCount:70]
Results: map[Contents:4075: rv = -EROFS;
4076: if (!md_is_rdwr(mddev))
4077: goto out_unlock;
4078:
4079: /* request to change the personality. Need to ensure:
4080: * - array is not engaged in resync/recovery/reshape
4081: * - old personality can be suspended
4082: * - new personality will access other array.
4083: */
4084:
4085: rv = -EBUSY;
4086: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
4087: mddev->reshape_position != MaxSector ||
4088: mddev->sysfs_active)
4089: goto out_unlock;
4090:
4091: rv = -EINVAL;
4092: if (!mddev->pers->quiesce) {
4093: pr_warn("md: %s: %s does not support online personality change\n",
4094: mdname(mddev), mddev->pers->head.name);
4095: goto out_unlock;
4096: }
4097:
4098: /* Now find the new personality */
4099: memcpy(clevel, buf, slen);
4100: if (clevel[slen-1] == '\n')
4101: slen--;
4102: clevel[slen] = 0;
4103: if (kstrtol(clevel, 10, &level))
4104: level = LEVEL_NONE;
4105:
4106: if (request_module("md-%s", clevel) != 0)
4107: request_module("md-level-%s", clevel);
4108: pers = get_pers(level, clevel);
4109: if (!pers) {
4110: rv = -EINVAL;
4111: goto out_unlock;
4112: }
4113:
4114: if (pers == mddev->pers) {
4115: /* Nothing to do! */
4116: put_pers(pers);
4117: rv = len;
4118: goto out_unlock;
4119: }
4120: if (!pers->takeover) {
4121: put_pers(pers);
4122: pr_warn("md: %s: %s does not support personality takeover\n",
4123: mdname(mddev), clevel);
4124: rv = -EINVAL;
4125: goto out_unlock;
4126: }
4127:
4128: rdev_for_each(rdev, mddev)
4129: rdev->new_raid_disk = rdev->raid_disk;
4130:
4131: /* ->takeover must set new_* and/or delta_disks
4132: * if it succeeds, and may set them when it fails.
4133: */
4134: priv = pers->takeover(mddev);
4135: if (IS_ERR(priv)) {
4136: mddev->new_level = mddev->level;
4137: mddev->new_layout = mddev->layout;
4138: mddev->new_chunk_sectors = mddev->chunk_sectors;
4139: mddev->raid_disks -= mddev->delta_disks;
4140: mddev->delta_disks = 0;
4141: mddev->reshape_backwards = 0;
4142: put_pers(pers);
4143: pr_warn("md: %s: %s would not accept array\n",
4144: mdname(mddev), clevel);
]
|
| 349/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 60715
output: 28
thoughts: 1515
Thoughts: **Analyzing Unstarted Reshape Behavior on Array Stop/Start**
Okay, let's break this down. I'm looking at the implications of stopping and restarting an MD array with a pending, but unstarted, reshape operation. Specifically, I'm focused on what happens to those "new_" parameters β `new_level`, `new_layout`, `new_chunk_sectors`, and `delta_disks` β after the array is stopped, and then restarted.
First, I examined how `level_store` handles a level change. If `takeover` succeeds, we *might* have some `new_` parameters pending. Then, `check_reshape` is called.
Then I reviewed the implications of changing `raid_disks`, `layout`, `chunk_size` which affect the `mddev->delta_disks`, `mddev->new_layout`, `mddev->new_chunk_sectors`, `mddev->new_level`, and `mddev->reshape_backwards` variables.
Next, I looked at what happens when `do_md_stop` is called. Specifically, when `mode == 0`, `md_clean(mddev)` is called, which resets all those "new_" parameters to their current values, effectively aborting the unstarted reshape. But if `mode == 2` (inactive), `md_clean` *isn't* called. This is crucial: the personality and disks are detached from sysfs, but the array metadata remains.
Now, I'm thinking about what happens when the array is restarted (through `md_run`). For RAID5, `pers->run` calls `raid5_run`. In `raid5_run`, there's a critical check. If `reshape_position == MaxSector` (no reshape in progress), the code asserts that all the "new_" parameters match their current counterparts (`level`, `layout`, etc.) and that `delta_disks` is zero. That makes sense, because if no reshape is in progress, any pending reshape parameters are for the *previous* instance of the array which has now been stopped. Therefore, the pending reshape is aborted when the array is stopped.
This brings up the question of whether an unstarted reshape is *supposed* to be aborted. After all, the array can be stopped, and then restarted.
Looking deeper, I see that during the stop process, `__md_stop` calls `pers->free(mddev, mddev->private)`. In the case of RAID5, `mddev->private` points to the `conf` structure. This `free` call means the stripe cache, pools, and any setup done by `check_reshape` are gone.
When `md_run` is called again, `pers->run` will create a *brand new* `conf` with a fresh `setup_conf`. The `setup_conf` function uses the current `mddev->raid_disks`, and if `reshape_position == MaxSector`, it assumes we're NOT reshaping.
Therefore, the `BUG_ON` checks in `raid5_run` *should* be valid. Any pending reshape parameters must have been cleared during the stop/free/restart cycle. But what about other personalities? I'll need to check the `raid10_run`, `raid1_run`, and `raid0_run` code. If we find cases where the new and old don't align, there is probably a bug.
|
| 350/5 |
2026/09/09 21:17 |
tool |
grepper |
0m
Args: map[Expression:raid10_run PathPrefix:drivers/md]
Results: map[Output:drivers/md/raid10.c=3922=static int raid10_set_queue_limits(struct mddev *mddev)
--
drivers/md/raid10.c-3942-
drivers/md/raid10.c:3943:static int raid10_run(struct mddev *mddev)
drivers/md/raid10.c-3944-{
--
drivers/md/raid10.c=5091=static struct md_personality raid10_personality =
--
drivers/md/raid10.c-5100- .make_request = raid10_make_request,
drivers/md/raid10.c:5101: .run = raid10_run,
drivers/md/raid10.c-5102- .free = raid10_free,
]
|
| 351/5 |
2026/09/09 21:17 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 63232
output: 38
thoughts: 29
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Diving into the Raid10 Run Implementation**
Alright, time to get my hands dirty. I need to refresh my memory on the `raid10_run` function. It's that critical piece within `drivers/md/raid10.c` at line 3943. I know the RAID10 code base pretty well, but it's always worth a quick look at the core `_run` path, especially given some of the recent performance considerations and potential edge cases that have been discussed. Let's see how it's *actually* implemented now. I want to see if there have been changes, or if there's anything I may have missed in previous reviews. I'm especially interested in any lock acquisition strategies within the function, particularly related to how `raid10` handles multiple active requests, and how it deals with the per-disk I/O path. I'm anticipating some calls to `md_raid_run` or something similar, and I'll pay close attention to the argument passing in order to understand how it calls down to underlying device interactions, since the RAID10 logic is somewhat convoluted. Okay, let's get into the code.
|
| 352/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid10.c FirstLine:3943 LineCount:70]
Results: map[Contents:3943: static int raid10_run(struct mddev *mddev)
3944: {
3945: struct r10conf *conf;
3946: int i, disk_idx;
3947: struct raid10_info *disk;
3948: struct md_rdev *rdev;
3949: sector_t size;
3950: sector_t min_offset_diff = 0;
3951: int first = 1;
3952: int ret = -EIO;
3953:
3954: if (mddev->private == NULL) {
3955: conf = setup_conf(mddev);
3956: if (IS_ERR(conf))
3957: return PTR_ERR(conf);
3958: mddev->private = conf;
3959: }
3960: conf = mddev->private;
3961: if (!conf)
3962: goto out;
3963:
3964: rcu_assign_pointer(mddev->thread, conf->thread);
3965: rcu_assign_pointer(conf->thread, NULL);
3966:
3967: if (mddev_is_clustered(conf->mddev)) {
3968: int fc, fo;
3969:
3970: fc = (mddev->layout >> 8) & 255;
3971: fo = mddev->layout & (1<<16);
3972: if (fc > 1 || fo > 0) {
3973: pr_err("only near layout is supported by clustered"
3974: " raid10\n");
3975: goto out_free_conf;
3976: }
3977: }
3978:
3979: rdev_for_each(rdev, mddev) {
3980: long long diff;
3981:
3982: disk_idx = rdev->raid_disk;
3983: if (disk_idx < 0)
3984: continue;
3985: if (disk_idx >= conf->geo.raid_disks &&
3986: disk_idx >= conf->prev.raid_disks)
3987: continue;
3988: disk = conf->mirrors + disk_idx;
3989:
3990: if (test_bit(Replacement, &rdev->flags)) {
3991: if (disk->replacement)
3992: goto out_free_conf;
3993: disk->replacement = rdev;
3994: } else {
3995: if (disk->rdev)
3996: goto out_free_conf;
3997: disk->rdev = rdev;
3998: }
3999: diff = (rdev->new_data_offset - rdev->data_offset);
4000: if (!mddev->reshape_backwards)
4001: diff = -diff;
4002: if (diff < 0)
4003: diff = 0;
4004: if (first || diff < min_offset_diff)
4005: min_offset_diff = diff;
4006:
4007: disk->head_position = 0;
4008: first = 0;
4009: }
4010:
4011: if (!mddev_is_dm(conf->mddev)) {
4012: int err = raid10_set_queue_limits(mddev);
]
|
| 353/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 64587
output: 38
thoughts: 19
Thoughts: Here's a breakdown of what I'm thinking as I dive into `setup_conf(mddev)` within the context of RAID10:
**Diving into RAID10 Configuration**
Okay, so I'm about to dissect `setup_conf(mddev)` in the RAID10 setup. Time to get granular. I need to understand exactly how the metadata is initialized, how the component devices are linked, and how the RAID10 specific properties are configured within the `mddev` structure. I'm focusing on the intricacies of the mirrored stripes and the spanning functionality that makes RAID10 what it is. I'm especially keen to see if they're handling things as I would expect, for efficiency and data integrity, or if there are any interesting architectural choices. I'm already anticipating areas where I might see opportunities to refine or optimize the process, maybe for error handling or improved performance during array rebuilds. I'm also looking for any potential gotchas related to device order or the handling of failed drives during array creation. It's time to get my hands dirty and understand exactly how this crucial RAID10 setup is being orchestrated.
|
| 354/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid10.c FirstLine:3870 LineCount:50]
Results: map[Contents:3870: err = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0);
3871: if (err)
3872: goto out;
3873:
3874: calc_sectors(conf, mddev->dev_sectors);
3875: if (mddev->reshape_position == MaxSector) {
3876: conf->prev = conf->geo;
3877: conf->reshape_progress = MaxSector;
3878: } else {
3879: if (setup_geo(&conf->prev, mddev, geo_old) != conf->copies) {
3880: err = -EINVAL;
3881: goto out;
3882: }
3883: conf->reshape_progress = mddev->reshape_position;
3884: if (conf->prev.far_offset)
3885: conf->prev.stride = 1 << conf->prev.chunk_shift;
3886: else
3887: /* far_copies must be 1 */
3888: conf->prev.stride = conf->dev_sectors;
3889: }
3890: conf->reshape_safe = conf->reshape_progress;
3891: spin_lock_init(&conf->device_lock);
3892: INIT_LIST_HEAD(&conf->retry_list);
3893: INIT_LIST_HEAD(&conf->bio_end_io_list);
3894:
3895: seqlock_init(&conf->resync_lock);
3896: init_waitqueue_head(&conf->wait_barrier);
3897: atomic_set(&conf->nr_pending, 0);
3898:
3899: err = -ENOMEM;
3900: rcu_assign_pointer(conf->thread,
3901: md_register_thread(raid10d, mddev, "raid10"));
3902: if (!conf->thread)
3903: goto out;
3904:
3905: conf->mddev = mddev;
3906: return conf;
3907:
3908: out:
3909: raid10_free_conf(conf);
3910: return ERR_PTR(err);
3911: }
3912:
3913: static unsigned int raid10_nr_stripes(struct r10conf *conf)
3914: {
3915: unsigned int raid_disks = conf->geo.raid_disks;
3916:
3917: if (conf->geo.raid_disks % conf->geo.near_copies)
3918: return raid_disks;
3919: return raid_disks / conf->geo.near_copies;
]
|
| 355/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 65668
output: 38
thoughts: 42
Thoughts: Here's my thought process, as requested:
**Deconstructing `setup_geo` in RAID10 Context**
Okay, so I'm digging into this `setup_geo` function, specifically within the `raid10` context. The call is happening here: `setup_geo(&conf->geo, mddev, geo_new)`. My initial thought is, "What's the *actual* purpose of `setup_geo` in this RAID10 implementation?" I need to understand its role. I need to know what it's supposed to *do*. Let me cross-reference the documentation, and other files that use setup_geo to gain more insight. It's time to dig into the function definition and, probably, its callers and callees to understand the finer details of the implementation.
|
| 356/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid10.c FirstLine:3800 LineCount:40]
Results: map[Contents:3800: WARN(geo->far_set_size < fc,
3801: "This RAID10 layout does not provide data safety - please backup and create new array\n");
3802: break;
3803: case 2: /* "improved" layout fixed to match documentation */
3804: geo->far_set_size = fc * nc;
3805: break;
3806: default: /* Not a valid layout */
3807: return -1;
3808: }
3809: geo->chunk_mask = chunk - 1;
3810: geo->chunk_shift = ffz(~chunk);
3811: return nc*fc;
3812: }
3813:
3814: static void raid10_free_conf(struct r10conf *conf)
3815: {
3816: if (!conf)
3817: return;
3818:
3819: mempool_destroy(conf->r10bio_pool);
3820: kfree(conf->mirrors);
3821: kfree(conf->mirrors_old);
3822: kfree(conf->mirrors_new);
3823: safe_put_page(conf->tmppage);
3824: bioset_exit(&conf->bio_split);
3825: kfree(conf);
3826: }
3827:
3828: static struct r10conf *setup_conf(struct mddev *mddev)
3829: {
3830: struct r10conf *conf = NULL;
3831: int err = -EINVAL;
3832: struct geom geo;
3833: int copies;
3834:
3835: copies = setup_geo(&geo, mddev, geo_new);
3836:
3837: if (copies == -2) {
3838: pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n",
3839: mdname(mddev), PAGE_SIZE);
]
|
| 357/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 66524
output: 38
thoughts: 58
Thoughts: Here's my take on those thoughts:
**Analyzing `setup_geo` in `raid10.c`**
Alright, let's dive in. I'm focusing on the `setup_conf` function within `raid10.c`. Specifically, I'm zeroing in on this line: `copies = setup_geo(&geo, mddev, geo_new);`. My interest is piqued by the call to `setup_geo`. I want to understand the role of `geo_new` and how it differs from a potential `geo_old`. My experience tells me that these `geo` structures likely represent the RAID geometry configurations. Therefore, I need to understand what `setup_geo` does with the "new" configuration versus a possible "old" configuration. This could be critical for understanding how the RAID10 setup handles changes, upgrades, or resizes. I'm thinking, are we dealing with a completely fresh setup (`geo_new`) or comparing it to a previous state, and if so, how does the function deal with the transition? It's all about how the geometry is defined and initialized. I'm assuming that it involves calculations around stripe width, chunk size, and data distribution, all of which are crucial for RAID10's performance. My next step will be to check how `setup_geo` defines `geo_new` and how it might handle a transition, if any, from an existing configuration.
|
| 358/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/raid10.c FirstLine:3760 LineCount:45]
Results: map[Contents:3760: switch (new) {
3761: case geo_old:
3762: layout = mddev->layout;
3763: chunk = mddev->chunk_sectors;
3764: disks = mddev->raid_disks - mddev->delta_disks;
3765: break;
3766: case geo_new:
3767: layout = mddev->new_layout;
3768: chunk = mddev->new_chunk_sectors;
3769: disks = mddev->raid_disks;
3770: break;
3771: default: /* avoid 'may be unused' warnings */
3772: case geo_start: /* new when starting reshape - raid_disks not
3773: * updated yet. */
3774: layout = mddev->new_layout;
3775: chunk = mddev->new_chunk_sectors;
3776: disks = mddev->raid_disks + mddev->delta_disks;
3777: break;
3778: }
3779: if (layout >> 19)
3780: return -1;
3781: if (chunk < (PAGE_SIZE >> 9) ||
3782: !is_power_of_2(chunk))
3783: return -2;
3784: nc = layout & 255;
3785: fc = (layout >> 8) & 255;
3786: fo = layout & (1<<16);
3787: if (!nc || !fc)
3788: return -1;
3789: geo->raid_disks = disks;
3790: geo->near_copies = nc;
3791: geo->far_copies = fc;
3792: geo->far_offset = fo;
3793: switch (layout >> 17) {
3794: case 0: /* original layout. simple but not always optimal */
3795: geo->far_set_size = disks;
3796: break;
3797: case 1: /* "improved" layout which was buggy. Hopefully no-one is
3798: * actually using this, but leave code here just in case.*/
3799: geo->far_set_size = disks/fc;
3800: WARN(geo->far_set_size < fc,
3801: "This RAID10 layout does not provide data safety - please backup and create new array\n");
3802: break;
3803: case 2: /* "improved" layout fixed to match documentation */
3804: geo->far_set_size = fc * nc;
]
|
| 359/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 67675
output: 28
thoughts: 706
Thoughts: **Analyzing RAID Reshape Geometry and the `__md_stop()` Function**
Okay, here's what I'm thinking as I dissect this code... In `raid10`, if the reshape hasn't started (`mddev->reshape_position == MaxSector`), the `geo_new` function *should* use the *current* geometry to configure the array, right? But if `new_layout` or `new_chunk_sectors` have been accidentally left altered from a prior, unfinished reshape, the code could incorrectly configure the RAID10 array with the *new* parameters as though it had reshaped even though it hadn't! That's a major potential bug.
Now, let's look at RAID5. It's got those stringent `BUG_ON` checks: `new_level`, `new_layout`, `new_chunk_sectors`, and `delta_disks` *must* equal the originals when `reshape_position` is `MaxSector`. That's because RAID5 is designed so that when the array isn't actually reshaping, these values must match to ensure the metadata isn't corrupted.
So, let's focus on the patch itself:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
This patch essentially resets the `new_*` values to the current ones when a reshape hasn't begun. That makes sense, but the question is, *is `__md_stop()` the right place for this?*
We need to be sure. Does `__md_stop()` get called for *every* array stop condition? `md_stop()` calls `__md_stop()` and so does `do_md_stop()`. I need to be sure that there aren't other spots where array personalities are detached or stopped. I need to make sure `pers->free` or `mddev->pers` are cleared *everywhere* that this could be an issue. Let me trace all calls to free the personality or to clear the pointer. We need to catch this from every possible state of the array.
|
| 360/5 |
2026/09/09 21:18 |
tool |
grepper |
0m
Args: map[Expression:mddev->pers = PathPrefix:drivers/md]
Results: map[Output:drivers/md/md.c=429=static void md_submit_bio(struct bio *bio)
--
drivers/md/md.c-433-
drivers/md/md.c:434: if (mddev == NULL || mddev->pers == NULL) {
drivers/md/md.c-435- bio_io_error(bio);
--
drivers/md/md.c=915=void mddev_unlock(struct mddev *mddev)
--
drivers/md/md.c-944- sysfs_remove_group(&mddev->kobj, to_remove);
drivers/md/md.c:945: if (mddev->pers == NULL ||
drivers/md/md.c-946- mddev->pers->sync_request == NULL) {
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1553-
drivers/md/md.c:1554: } else if (mddev->pers == NULL) {
drivers/md/md.c-1555- /* Insist on good event counter while assembling, except
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2090- }
drivers/md/md.c:2091: } else if (mddev->pers == NULL) {
drivers/md/md.c-2092- /* Insist of good event counter while assembling, except for
--
drivers/md/md.c-2120- rdev->desc_nr = -1;
drivers/md/md.c:2121: } else if (mddev->pers == NULL && freshest && ev1 < mddev->events) {
drivers/md/md.c-2122- /*
--
drivers/md/md.c=3082=state_store(struct md_rdev *rdev, const char *buf, size_t len)
--
drivers/md/md.c-3169- !test_bit(Journal, &rdev->flags)) {
drivers/md/md.c:3170: if (rdev->mddev->pers == NULL) {
drivers/md/md.c-3171- clear_bit(In_sync, &rdev->flags);
--
drivers/md/md.c=4047=level_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4065-
drivers/md/md.c:4066: if (mddev->pers == NULL) {
drivers/md/md.c-4067- memcpy(mddev->clevel, buf, slen);
--
drivers/md/md.c-4154- oldpriv = mddev->private;
drivers/md/md.c:4155: mddev->pers = pers;
drivers/md/md.c-4156- mddev->private = priv;
--
drivers/md/md.c=5929=static ssize_t serialize_policy_show(struct mddev *mddev, char *page)
drivers/md/md.c-5930-{
drivers/md/md.c:5931: if (mddev->pers == NULL || (mddev->pers->head.id != ID_RAID1))
drivers/md/md.c-5932- return sprintf(page, "n/a\n");
--
drivers/md/md.c=5943=serialize_policy_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5957- return err;
drivers/md/md.c:5958: if (mddev->pers == NULL || (mddev->pers->head.id != ID_RAID1)) {
drivers/md/md.c-5959- pr_err("md: serialize_policy is only effective for raid1\n");
--
drivers/md/md.c=6650=int md_run(struct mddev *mddev)
--
drivers/md/md.c-6840- spin_lock(&mddev->lock);
drivers/md/md.c:6841: mddev->pers = pers;
drivers/md/md.c-6842- spin_unlock(&mddev->lock);
--
drivers/md/md.c=7084=static void __md_stop(struct mddev *mddev)
--
drivers/md/md.c-7090- spin_lock(&mddev->lock);
drivers/md/md.c:7091: mddev->pers = NULL;
drivers/md/md.c-7092- spin_unlock(&mddev->lock);
--
drivers/md/md.c=8230=static int set_disk_faulty(struct mddev *mddev, dev_t dev)
--
drivers/md/md.c-8234-
drivers/md/md.c:8235: if (mddev->pers == NULL)
drivers/md/md.c-8236- return -ENODEV;
]
|
| 361/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 70321
output: 36
thoughts: 72
Thoughts: Okay, let's break this down.
**Investigating the `mddev->pers` Clearing Mechanism**
Right, so `__md_stop()` is the designated function for clearing `mddev->pers`, setting it to `NULL`. Seems straightforward enough. But hold on a second⦠I need to consider potential error paths. Specifically, I'm thinking about `md_run()` and the implications of a failed `pers->run()`. Where does `md_run()` handle errors related to the persistent data structure's run function? I need to trace through the error handling in `md_run()` to confirm that `mddev->pers` is properly handled in those scenarios as well. I'm going to carefully review the `md_run()` code related to `pers->run()` failure and make sure no leaks or incorrect assumptions are made.
|
| 362/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6775 LineCount:80]
Results: map[Contents:6775:
6776: if (start_readonly && md_is_rdwr(mddev))
6777: mddev->ro = MD_AUTO_READ; /* read-only, but switch on first write */
6778:
6779: err = pers->run(mddev);
6780: if (err)
6781: pr_warn("md: pers->run() failed ...\n");
6782: else if (pers->size(mddev, 0, 0) < mddev->array_sectors) {
6783: WARN_ONCE(!mddev->external_size,
6784: "%s: default size too small, but 'external_size' not in effect?\n",
6785: __func__);
6786: pr_warn("md: invalid array_size %llu > default size %llu\n",
6787: (unsigned long long)mddev->array_sectors / 2,
6788: (unsigned long long)pers->size(mddev, 0, 0) / 2);
6789: err = -EINVAL;
6790: }
6791: if (err == 0 && pers->sync_request &&
6792: (mddev->bitmap_info.file || mddev->bitmap_info.offset)) {
6793: err = md_bitmap_create(mddev);
6794: if (err)
6795: pr_warn("%s: failed to create bitmap (%d)\n",
6796: mdname(mddev), err);
6797: }
6798: if (err)
6799: goto bitmap_abort;
6800:
6801: if (mddev->bitmap_info.max_write_behind > 0) {
6802: bool create_pool = false;
6803:
6804: rdev_for_each(rdev, mddev) {
6805: if (test_bit(WriteMostly, &rdev->flags) &&
6806: rdev_init_serial(rdev))
6807: create_pool = true;
6808: }
6809: if (create_pool && mddev->serial_info_pool == NULL) {
6810: mddev->serial_info_pool =
6811: mempool_create_kmalloc_pool(NR_SERIAL_INFOS,
6812: sizeof(struct serial_info));
6813: if (!mddev->serial_info_pool) {
6814: err = -ENOMEM;
6815: goto bitmap_abort;
6816: }
6817: }
6818: }
6819:
6820: if (pers->sync_request) {
6821: if (mddev->kobj.sd &&
6822: sysfs_create_group(&mddev->kobj, &md_redundancy_group))
6823: pr_warn("md: cannot register extra attributes for %s\n",
6824: mdname(mddev));
6825: mddev->sysfs_action = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_action");
6826: mddev->sysfs_completed = sysfs_get_dirent_safe(mddev->kobj.sd, "sync_completed");
6827: mddev->sysfs_degraded = sysfs_get_dirent_safe(mddev->kobj.sd, "degraded");
6828: } else if (mddev->ro == MD_AUTO_READ)
6829: mddev->ro = MD_RDWR;
6830:
6831: atomic_set(&mddev->max_corr_read_errors,
6832: MD_DEFAULT_MAX_CORRECTED_READ_ERRORS);
6833: mddev->safemode = 0;
6834: if (mddev_is_clustered(mddev))
6835: mddev->safemode_delay = 0;
6836: else
6837: mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
6838: mddev->in_sync = 1;
6839: smp_wmb();
6840: spin_lock(&mddev->lock);
6841: mddev->pers = pers;
6842: spin_unlock(&mddev->lock);
6843: rdev_for_each(rdev, mddev)
6844: if (rdev->raid_disk >= 0)
6845: sysfs_link_rdev(mddev, rdev); /* failure here is OK */
6846:
6847: if (mddev->degraded && md_is_rdwr(mddev))
6848: /* This ensures that recovering status is reported immediately
6849: * via sysfs - until a lack of spares is confirmed.
6850: */
6851: set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
6852: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
6853:
6854: if (mddev->sb_flags)
]
|
| 363/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 72047
output: 36
thoughts: 14
Thoughts: Here's my take on the error path in `md_run()`:
**Delving into `md_run()`'s Error Handling**
Alright, let's dissect this `md_run()` function and specifically, I want to zero in on how it gracefully (or not so gracefully) handles errors. Understanding the error paths is crucial. When things go sideways, what happens? Are we losing data? Are we properly logging errors so we can debug later? Is the system left in a stable, consistent state? These are the kinds of questions I need the answers to. I need to know the details! Let's see how the author dealt with any potential failures and what their approach to fault tolerance was. What's the process? Are there try/catch blocks, error codes, specific exception handling, or even worse, hidden gotchas? I'm anticipating some critical details here. Time to dig in.
|
| 364/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6855 LineCount:40]
Results: map[Contents:6855: md_update_sb(mddev, 0);
6856:
6857: if (IS_ENABLED(CONFIG_MD_BITMAP) && !mddev->bitmap_info.file &&
6858: !mddev->bitmap_info.offset)
6859: md_bitmap_set_none(mddev);
6860:
6861: md_new_event();
6862: return 0;
6863:
6864: bitmap_abort:
6865: mddev_detach(mddev);
6866: if (mddev->private)
6867: pers->free(mddev, mddev->private);
6868: mddev->private = NULL;
6869: put_pers(pers);
6870: md_bitmap_destroy(mddev);
6871: return err;
6872: }
6873: EXPORT_SYMBOL_GPL(md_run);
6874:
6875: int do_md_run(struct mddev *mddev)
6876: {
6877: int err;
6878:
6879: set_bit(MD_NOT_READY, &mddev->flags);
6880: err = md_run(mddev);
6881: if (err)
6882: goto out;
6883:
6884: if (md_bitmap_registered(mddev)) {
6885: err = mddev->bitmap_ops->load(mddev);
6886: if (err) {
6887: md_bitmap_destroy(mddev);
6888: goto out;
6889: }
6890: }
6891:
6892: if (mddev_is_clustered(mddev))
6893: md_allow_write(mddev);
6894:
]
|
| 365/5 |
2026/09/09 21:18 |
llm |
patch-reviewer-compressor |
0m
Model:
Reply: ### 1. Summary of Approaches Tried and Results
* **Crash Analysis:**
* Crash stack: `raid5_run` at `drivers/md/raid5.c:8117` hit `BUG_ON(mddev->delta_disks != 0)`.
* Trigger scenario: User activated RAID5 array, wrote to sysfs `raid_disks` triggering `update_raid_disks()`, setting `mddev->delta_disks = raid_disks - mddev->raid_disks` and calling `check_reshape(mddev)`.
* Before the reshape started (meaning `mddev->reshape_position` remained `MaxSector`), the array was stopped/inactivated via `array_state` -> `"inactive"` (which invokes `do_md_stop(mddev, mode=2)`).
* `do_md_stop(mddev, mode=2)` calls `__md_stop_writes(mddev)` and `__md_stop(mddev)`.
* Unlike `mode=0` (which calls `md_clean(mddev)` clearing reshape fields), `mode=2` stops writes and detaches the personality without calling `md_clean()`.
* In `__md_stop()`, `mddev->pers` is set to `NULL`, `mddev->private` is freed, but pending reshape parameters (`delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, `new_chunk_sectors`) were retained in `mddev`.
* When userspace restarted the array (`array_state` -> `"active"`), `md_run()` invoked `pers->run(mddev)` (`raid5_run()`).
* In `raid5_run()`, since `mddev->reshape_position == MaxSector`, it entered the `else` branch checking:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
and tripped `BUG_ON(mddev->delta_disks != 0)`.
* **Investigation into MD Subsystem Handling of Reshape Parameters:**
* Checked `super_1_validate()` and `super_90_validate()` in `drivers/md/md.c`:
* When `MD_FEATURE_RESHAPE_ACTIVE` is NOT set (or superblock minor version < 91):
```c
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
```
* This confirms the invariant: if no reshape is actively running (`reshape_position == MaxSector`), the `new_*` parameters must match the current configuration, and `delta_disks` must be `0`.
* Checked `md_clean()`:
* Resets `delta_disks = 0`, `reshape_backwards = 0`, `new_level = LEVEL_NONE`, `new_layout = 0`, `new_chunk_sectors = 0`. But `md_clean()` is only called on full array stop (`mode == 0`).
* Evaluated Proposed Fix:
```c
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
* Checked whether `__md_stop()` is called in all teardown paths:
* `md_stop()` (used by `dm-raid`) calls `__md_stop()`.
* `do_md_stop(mddev, mode)` calls `__md_stop()`.
* If `mddev->reshape_position != MaxSector`, an active reshape is preserved across `__md_stop()`, matching the resume behavior in `raid5_run()`.
* If `mddev->reshape_position == MaxSector`, any pending reshape that never began is discarded, restoring state consistency with `mddev->level`, `mddev->layout`, and `mddev->chunk_sectors`.
### 2. Hypotheses, Theories, and Active Lines of Investigation
* **Architectural Review Assessment:**
* **Sentinel vs Root Cause:** The proposed patch fixes the lifecycle invariant at teardown (`__md_stop()`) rather than adding a band-aid sentinel guard in `raid5_run()` to bypass the `BUG_ON()`.
* **Typestate / Lifecycle Symmetry:** When transitioning the array out of the active state (`__md_stop()`), unstarted transient reconfiguration state must be cleared so the array does not persist a half-configured, unstarted reshape state while inactive.
* **Consistency across superblocks:** The exact 5-field reset in the patch matches what `super_1_validate()` and `super_90_validate()` do when an array without active reshape is loaded from disk.
* **Scope Constraint:** Fits cleanly within single standalone patch scope. No regressions to dm-raid or multi-device active reshapes.
### 3. Critical Code Snippets, File Paths, and Constants
* **`drivers/md/raid5.c:8113-8118`**
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
* **`drivers/md/md.c:2065-2071` (`super_1_validate`)**
```c
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
* **`drivers/md/md.c:7084-7098` (`__md_stop`)**
```c
static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
```
* **`drivers/md/md.c:8060-8071` (`update_raid_disks`)**
```c
mddev->delta_disks = raid_disks - mddev->raid_disks;
if (mddev->delta_disks < 0)
mddev->reshape_backwards = 1;
else if (mddev->delta_disks > 0)
mddev->reshape_backwards = 0;
rv = mddev->pers->check_reshape(mddev);
if (rv < 0) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
}
return rv;
```
### 4. Reasoning Loops and Tool Call Checks
* No tool loops occurred. Source code inspection of `raid5_run`, `__md_stop`, `do_md_stop`, `md_clean`, `super_1_validate`, `update_raid_disks`, and `start_reshape` complete.
* Ready to proceed directly to verdict formulation and invoking `set-results`.
Tokens:
input: 53941
output: 2140
thoughts: 0
|
| 366/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 33180
output: 27
thoughts: 458
Thoughts: **Analyzing the md_run and __md_stop Functions in the Linux Kernel's RAID Implementation**
Okay, let's break this down. My initial observation focused on the `bitmap_abort:` section within `md_run`. The immediate issue that jumps out is the potential for a race condition. It looks like `mddev->pers` might not be initialized yet when `bitmap_abort` is called. That's a red flag. If it's uninitialized, then we're going to get garbage data, or a segfault. Also, if `mddev->pers` *was* running, `__md_stop()` should halt it.
Now, let's investigate `__md_stop()`. Looking at this function, it seems more comprehensive. It detaches the device, destroys the bitmap, and clears the personality. The spinlocks ensure that we have exclusive access to the `mddev` structure while modifying it, which is good. Importantly, it also frees the private data associated with the personality. However, I'm noting the `clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery)` call at the end, that's important for keeping the array from resuming.
I'm starting to see a possible sequence of events: we can have an array running, then a reshape process. During that reshape, can we switch `reshape_position` back to `MaxSector`? I need to understand when and how `reshape_position` is handled. Specifically, I need to know under what conditions `reshape_position` gets set to `MaxSector`. I'm going to look for all the places where `reshape_position` is updated or, more crucially, set to `MaxSector`. That's where the crux of the logic lies, and I need to verify that everything is handled correctly in the face of these changes.
|
| 367/5 |
2026/09/09 21:18 |
tool |
grepper |
0m
Args: map[Expression:reshape_position = PathPrefix:drivers/md]
Results: map[Output:drivers/md/dm-raid.c=2110=static void super_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2163- smp_rmb(); /* Make sure we access most recent reshape position */
drivers/md/dm-raid.c:2164: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/dm-raid.c-2165- if (le64_to_cpu(sb->reshape_position) != MaxSector) {
--
drivers/md/dm-raid.c=2237=static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev)
--
drivers/md/dm-raid.c-2255-
drivers/md/dm-raid.c:2256: mddev->reshape_position = MaxSector;
drivers/md/dm-raid.c-2257-
--
drivers/md/dm-raid.c-2287-
drivers/md/dm-raid.c:2288: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/dm-raid.c-2289- rs->raid_type = get_raid_type_by_ll(mddev->level, mddev->layout);
--
drivers/md/md.c=740=int mddev_init(struct mddev *mddev)
--
drivers/md/md.c-788- init_waitqueue_head(&mddev->recovery_wait);
drivers/md/md.c:789: mddev->reshape_position = MaxSector;
drivers/md/md.c-790- mddev->reshape_backwards = 0;
--
drivers/md/md.c=1478=static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-1511- if (mddev->minor_version >= 91) {
drivers/md/md.c:1512: mddev->reshape_position = sb->reshape_position;
drivers/md/md.c-1513- mddev->delta_disks = sb->delta_disks;
--
drivers/md/md.c-1519- } else {
drivers/md/md.c:1520: mddev->reshape_position = MaxSector;
drivers/md/md.c-1521- mddev->delta_disks = 0;
--
drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1648-
drivers/md/md.c:1649: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-1650- sb->minor_version = 90;
--
drivers/md/md.c-1652- sb->minor_version = 91;
drivers/md/md.c:1653: sb->reshape_position = mddev->reshape_position;
drivers/md/md.c-1654- sb->new_level = mddev->new_level;
--
drivers/md/md.c=1993=static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
--
drivers/md/md.c-2054- if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
drivers/md/md.c:2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-2056- mddev->delta_disks = le32_to_cpu(sb->delta_disks);
--
drivers/md/md.c-2065- } else {
drivers/md/md.c:2066: mddev->reshape_position = MaxSector;
drivers/md/md.c-2067- mddev->delta_disks = 0;
--
drivers/md/md.c=2199=static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-2265- sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
drivers/md/md.c:2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
drivers/md/md.c-2267- sb->new_layout = cpu_to_le32(mddev->new_layout);
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4392- mddev->new_layout = n;
drivers/md/md.c:4393: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4394- mddev->layout = n;
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4505- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4506: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4507- mddev->chunk_sectors = n >> 9;
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5248-
drivers/md/md.c:5249: if (mddev->reshape_position == MaxSector ||
drivers/md/md.c-5250- mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=5721=reshape_position_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-5737- goto unlock;
drivers/md/md.c:5738: mddev->reshape_position = new;
drivers/md/md.c-5739- mddev->delta_disks = 0;
--
drivers/md/md.c-5751-
drivers/md/md.c:5752:static struct md_sysfs_entry md_reshape_position =
drivers/md/md.c-5753-__ATTR(reshape_position, S_IRUGO|S_IWUSR, reshape_position_show,
--
drivers/md/md.c=6967=static void md_clean(struct mddev *mddev)
--
drivers/md/md.c-6975- mddev->resync_max = MaxSector;
drivers/md/md.c:6976: mddev->reshape_position = MaxSector;
drivers/md/md.c-6977- /* we still need mddev->external in export_rdev, do not clear it yet */
--
drivers/md/md.c=7907=int md_set_array_info(struct mddev *mddev, struct mdu_array_info_s *info)
--
drivers/md/md.c-7964-
drivers/md/md.c:7965: mddev->reshape_position = MaxSector;
drivers/md/md.c-7966-
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10267- */
drivers/md/md.c:10268: if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10269- md_spares_need_change(mddev)) {
--
drivers/md/md.c-10280- */
drivers/md/md.c:10281: if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10282- md_spares_need_change(mddev)) {
--
drivers/md/md.c=10794=static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-10888- */
drivers/md/md.c:10889: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
drivers/md/md.c-10890- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.c-10897- /* reshape is just done in another node. */
drivers/md/md.c:10898: mddev->reshape_position = MaxSector;
drivers/md/md.c-10899- if (mddev->pers->update_reshape_pos)
--
drivers/md/md.h=690=static inline bool reshape_interrupted(struct mddev *mddev)
--
drivers/md/md.h-692- /* reshape never start */
drivers/md/md.h:693: if (mddev->reshape_position == MaxSector)
drivers/md/md.h-694- return false;
--
drivers/md/raid10.c=1343=static bool raid10_write_request(struct mddev *mddev, struct bio *bio,
--
drivers/md/raid10.c-1371- /* Need to update reshape_position in metadata */
drivers/md/raid10.c:1372: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-1373- set_mask_bits(&mddev->sb_flags, 0,
--
drivers/md/raid10.c=3141=static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-3159- mddev->resync_offset == MaxSector &&
drivers/md/raid10.c:3160: mddev->reshape_position == MaxSector &&
drivers/md/raid10.c-3161- !test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
--
drivers/md/raid10.c=3828=static struct r10conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid10.c-3874- calc_sectors(conf, mddev->dev_sectors);
drivers/md/raid10.c:3875: if (mddev->reshape_position == MaxSector) {
drivers/md/raid10.c-3876- conf->prev = conf->geo;
--
drivers/md/raid10.c=4345=static int raid10_start_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-4510- mddev->raid_disks = conf->geo.raid_disks;
drivers/md/raid10.c:4511: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-4512- set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
--
drivers/md/raid10.c-4536- conf->reshape_safe = MaxSector;
drivers/md/raid10.c:4537: mddev->reshape_position = MaxSector;
drivers/md/raid10.c-4538- spin_unlock_irq(&conf->device_lock);
--
drivers/md/raid10.c=4574=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-4704- }
drivers/md/raid10.c:4705: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid10.c-4706- if (mddev->reshape_backwards)
--
drivers/md/raid10.c=4928=static void raid10_update_reshape_pos(struct mddev *mddev)
--
drivers/md/raid10.c-4934- if (((mddev->reshape_position <= hi) && (mddev->reshape_position >= lo))
drivers/md/raid10.c:4935: || mddev->reshape_position == MaxSector)
drivers/md/raid10.c-4936- conf->reshape_progress = mddev->reshape_position;
--
drivers/md/raid10.c=5044=static void raid10_finish_reshape(struct mddev *mddev)
--
drivers/md/raid10.c-5076- mddev->chunk_sectors = 1 << conf->geo.chunk_shift;
drivers/md/raid10.c:5077: mddev->reshape_position = MaxSector;
drivers/md/raid10.c-5078- mddev->delta_disks = 0;
--
drivers/md/raid5.c=6218=static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
--
drivers/md/raid5.c-6249- if (rw == READ && mddev->degraded == 0 &&
drivers/md/raid5.c:6250: mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-6251- bi = chunk_aligned_read(mddev, bi);
--
drivers/md/raid5.c=6379=static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
--
drivers/md/raid5.c-6525- }
drivers/md/raid5.c:6526: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6527- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c-6641- }
drivers/md/raid5.c:6642: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-6643- mddev->curr_resync_completed = sector_nr;
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7725- conf->raid_disks = mddev->raid_disks;
drivers/md/raid5.c:7726: if (mddev->reshape_position == MaxSector)
drivers/md/raid5.c-7727- conf->previous_raid_disks = mddev->raid_disks;
--
drivers/md/raid5.c=8444=static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/raid5.c-8507- if (test_bit(WantReplacement, &tmp->flags) &&
drivers/md/raid5.c:8508: mddev->reshape_position == MaxSector &&
drivers/md/raid5.c-8509- p->replacement == NULL) {
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
--
drivers/md/raid5.c=8635=static int raid5_start_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8755- mddev->raid_disks = conf->raid_disks;
drivers/md/raid5.c:8756: mddev->reshape_position = conf->reshape_progress;
drivers/md/raid5.c-8757- set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
--
drivers/md/raid5.c=8772=static void end_reshape(struct r5conf *conf)
--
drivers/md/raid5.c-8791- conf->reshape_progress = MaxSector;
drivers/md/raid5.c:8792: conf->mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8793- rdev_for_each(rdev, conf->mddev)
--
drivers/md/raid5.c=8809=static void raid5_finish_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8841- mddev->chunk_sectors = conf->chunk_sectors;
drivers/md/raid5.c:8842: mddev->reshape_position = MaxSector;
drivers/md/raid5.c-8843- mddev->delta_disks = 0;
]
|
| 368/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 38653
output: 36
thoughts: 1520
Thoughts: **Analyzing MD Reshape State and Invariants**
Okay, let's break this down. It seems I'm diving into the MD (Multiple Device) RAID code, specifically focusing on reshape operations. My initial observation is that whenever a reshape *isn't* actively running β meaning `mddev->reshape_position` is `MaxSector` β there's a strict invariant enforced: `mddev->delta_disks` is zero, `mddev->reshape_backwards` is zero, and the "new" configuration parameters (`new_level`, `new_layout`, `new_chunk_sectors`) are all synced with the current active parameters (`level`, `layout`, `chunk_sectors`). This is consistent across `raid5_finish_reshape`, `super_1_validate`, `super_90_validate`, `level_store`, `update_raid_disks`, `layout_store`, and `chunk_size_store`. These are the reset states.
Now, the interesting part. A reshape is initiated when a user attempts to modify array parameters like `raid_disks`, `layout`, `chunk_size`, or `level` on a running array. The personality's `check_reshape` function is called to validate the requested change. If valid, the "new" parameters and reshape-related fields are updated, marking the array as in "reshape ready" state, but not yet started.
Here's the problem: if that reshape is *never* started (i.e., `reshape_position` remains at `MaxSector`), and the array is stopped, the personality is freed, but the pending reshape parameters are *not* reset. That's a potential issue! They are not properly cleaned up!
Specifically, I'm concerned about the case where the array is deactivated (`mode == 2`), where the array isn't completely cleaned. `md_clean()` *does* clear these parameters (setting `new_level` to `LEVEL_NONE`, etc.) but it's *not* called in the deactivated case, and that leaves `mddev`'s pending reshape parameters in an invalid, stale state after the personality is freed! We are discarding them, but not resetting them. This could cause issues on a restart, as the state would be inconsistent.
Now, let's confirm the current assumptions about an actively running reshape.
It looks like there's an `if (mddev->reshape_position == MaxSector)` check in `__md_stop`. If the reshape *is* in progress (i.e., `mddev->reshape_position` is *not* `MaxSector`), then this `if` block is NOT entered. The existing reshape parameters, including `delta_disks`, `reshape_backwards`, and the "new" configuration parameters, are *preserved*. This is vital because the intention is to resume the interrupted reshape on restart, and `raid5_run` expects these parameters to be in their existing state. `raid5_run` explicitly checks `if (mddev->reshape_position != MaxSector)`, so the check is important to resume an incomplete reshape.
Ok, so it appears `do_md_stop` handles the in-progress reshape correctly. Now I just need to verify that those cleanup steps happen on the stop, when a reshape is *not* active.
|
| 369/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7090 LineCount:45]
Results: map[Contents:7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
7110:
7111: EXPORT_SYMBOL_GPL(md_stop);
7112:
7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
7115: {
7116: int err = 0;
7117: int did_freeze = 0;
7118:
7119: if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
7120: return -EBUSY;
7121:
7122: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7123: did_freeze = 1;
7124: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7125: }
7126:
7127: stop_sync_thread(mddev, false);
7128: wait_event(mddev->sb_wait,
7129: !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
7130: mddev_lock_nointr(mddev);
7131:
7132: if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7133: pr_warn("md: %s still in use.\n",mdname(mddev));
7134: err = -EBUSY;
]
|
| 370/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 41637
output: 36
thoughts: 13
Thoughts: Okay, here's my attempt at summarizing the thought process, tailored for an expert audience, and delivered in the first person:
**Checking `do_md_stop()` Functionality**
Alright, I'm diving into this section. Based on the surrounding context, I need to make absolutely sure the logic surrounding `do_md_stop()` is sound. My primary concern is how it interacts with the rest of the markdown processing pipeline. Specifically, I'm thinking about edge cases. Are there situations where this function might prematurely halt processing, leading to unexpected output or, worse, corrupted data? I need to analyze its conditions for stopping. Are they comprehensive? Are they properly guarded against all possible input scenarios? I'm imagining scenarios in my head, where the stop condition is too broad, and crucial elements get skipped. Conversely, Iβm also considering if it's too restrictive, potentially allowing unwanted content to slip through. So, I must meticulously evaluate the underlying assumptions this function makes about the structure and interpretation of the markdown. What are the dependencies? Are they sound, or could there be a chain reaction of failures if this stops too early, or too late? Iβm going to focus on how this function impacts the overall workflow and whether any errors could slip through undetected. I will check for any logical issues that could cause problems, and verify its efficacy.
|
| 371/5 |
2026/09/09 21:18 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7165 LineCount:55]
Results: map[Contents:7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
]
|
| 372/5 |
2026/09/09 21:18 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 42838
output: 36
thoughts: 615
Thoughts: **Analyzing the `do_md_stop()` and Reshape Logic**
Okay, so I'm looking at `do_md_stop()` and I see a potential issue. Specifically, when `mode` is 2, it seems we have a problem. The code checks `if (mddev->pers)` and then calls `__md_stop_writes(mddev)` and `__md_stop(mddev)`. Crucially, after this execution path, the subsequent check for `mode == 0` is skipped. This means that `md_clean(mddev)` might not be called when `mode` is 2. This is a problem.
Let's drill down into `__md_stop()`. I see that the personality is detached and freed in `__md_stop()`. It calls `mddev_detach(mddev)`, destroys the bitmap, sets `mddev->pers` to `NULL`, and then potentially calls the personality's `free` function, and finally `put_pers()`. It also clears `MD_RECOVERY_FROZEN`.
Now, if `mddev->reshape_position` is equal to `MaxSector`, it indicates that no reshape was active. The proposed fix, in this case, does something important: it resets `delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`.
However, my brain just went *ding*! Wait a minute... what about the potential failures in `md_run` and `bitmap_abort`? In `md_run` If `pers->run(mddev)` fails or bitmap init fails there's this `bitmap_abort` label. `mddev` is detached and the personality's `free` is called, and the bitmap is destroyed. This also does not change `delta_disks` etc.
If `md_run` fails *before* we assign `mddev->pers = pers`, does anything need to be reset then? I don't see anything explicitly resetting `delta_disks` or the `new_*` variables in the failure path of `md_run`. But, the `pers->run(mddev)` was still called in `md_run`
I need to confirm if there are any other places where `delta_disks`, or the `new_*` variables could be modified when inactive or actively. I'll need to check `raid_disks_store`. Let's have a look at `drivers/md/md.c` to see how `raid_disks_store` handles this.
|
| 373/5 |
2026/09/09 21:19 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4400 LineCount:70]
Results: map[Contents:4400: __ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
4401:
4402: static ssize_t
4403: raid_disks_show(struct mddev *mddev, char *page)
4404: {
4405: if (mddev->raid_disks == 0)
4406: return 0;
4407: if (mddev->reshape_position != MaxSector &&
4408: mddev->delta_disks != 0)
4409: return sprintf(page, "%d (%d)\n", mddev->raid_disks,
4410: mddev->raid_disks - mddev->delta_disks);
4411: return sprintf(page, "%d\n", mddev->raid_disks);
4412: }
4413:
4414: static int update_raid_disks(struct mddev *mddev, int raid_disks);
4415:
4416: static ssize_t
4417: raid_disks_store(struct mddev *mddev, const char *buf, size_t len)
4418: {
4419: unsigned int n;
4420: unsigned int noio_flags;
4421: int err;
4422:
4423: err = kstrtouint(buf, 10, &n);
4424: if (err < 0)
4425: return err;
4426:
4427: err = mddev_suspend_and_lock(mddev);
4428: if (err)
4429: return err;
4430: noio_flags = memalloc_noio_save();
4431: if (mddev->pers) {
4432: if (n != mddev->raid_disks)
4433: err = update_raid_disks(mddev, n);
4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
4439: rdev_for_each(rdev, mddev) {
4440: if (olddisks < n &&
4441: rdev->data_offset < rdev->new_data_offset)
4442: goto out_unlock;
4443: if (olddisks > n &&
4444: rdev->data_offset > rdev->new_data_offset)
4445: goto out_unlock;
4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
4451: } else
4452: mddev->raid_disks = n;
4453: out_unlock:
4454: memalloc_noio_restore(noio_flags);
4455: mddev_unlock_and_resume(mddev);
4456: return err ? err : len;
4457: }
4458: static struct md_sysfs_entry md_raid_disks =
4459: __ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
4460:
4461: static ssize_t
4462: uuid_show(struct mddev *mddev, char *page)
4463: {
4464: return sprintf(page, "%pU\n", mddev->uuid);
4465: }
4466: static struct md_sysfs_entry md_uuid =
4467: __ATTR(uuid, S_IRUGO, uuid_show, NULL);
4468:
4469: static ssize_t
]
|
| 374/5 |
2026/09/09 21:19 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 45198
output: 36
thoughts: 518
Thoughts: **Analyzing MD RAID Device Parameters**
Okay, let's break this down. I'm focusing on the behavior of these MD RAID device parameters when the array is stopped and not reshaping, which is indicated by `mddev->pers == NULL` and `mddev->reshape_position == MaxSector`. I'm specifically looking at how `raid_disks`, `layout`, and `chunk_sectors` are handled, and how that relates to the setting of `level`.
First, the `raid_disks_store` function: if the array is in the inactive/stopped state, it directly assigns the new value (`n`) to `mddev->raid_disks`. Importantly, there's no corresponding assignment to `delta_disks`. That's a key observation.
Next, `layout_store`. If in the inactive/stopped state, it sets *both* `mddev->new_layout` *and* `mddev->layout`. This suggests that in this state, we are setting the current and the pending layout in one action. This is different from the `raid_disks` case.
Then, the `chunk_size_store`. Similar to `layout_store`, it sets both `mddev->new_chunk_sectors` and `mddev->chunk_sectors` when stopped.
Now the interesting one: `level_store`. When `mddev->pers` is NULL (inactive), it sets `mddev->level` directly *and* copies to `mddev->clevel`. But, does it also set `mddev->new_level`? It seems like it *might* be implicit, but it's not clear. `mddev->new_level` is set at array run start, or in `md_clean`. We need to explicitly check `level_store` lines 4050-4075 to be certain if a value is implicitly set to the new level in this state.
|
| 375/5 |
2026/09/09 21:19 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4050 LineCount:35]
Results: map[Contents:4050: ssize_t rv;
4051: size_t slen = len;
4052: unsigned int noio_flags;
4053: struct md_personality *pers, *oldpers;
4054: long level;
4055: void *priv, *oldpriv;
4056: struct md_rdev *rdev;
4057:
4058: if (slen == 0 || slen >= sizeof(clevel))
4059: return -EINVAL;
4060:
4061: rv = mddev_suspend_and_lock(mddev);
4062: if (rv)
4063: return rv;
4064: noio_flags = memalloc_noio_save();
4065:
4066: if (mddev->pers == NULL) {
4067: memcpy(mddev->clevel, buf, slen);
4068: if (mddev->clevel[slen-1] == '\n')
4069: slen--;
4070: mddev->clevel[slen] = 0;
4071: mddev->level = LEVEL_NONE;
4072: rv = len;
4073: goto out_unlock;
4074: }
4075: rv = -EROFS;
4076: if (!md_is_rdwr(mddev))
4077: goto out_unlock;
4078:
4079: /* request to change the personality. Need to ensure:
4080: * - array is not engaged in resync/recovery/reshape
4081: * - old personality can be suspended
4082: * - new personality will access other array.
4083: */
4084:
]
|
| 376/5 |
2026/09/09 21:19 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 46677
output: 36
thoughts: 107
Thoughts: **Analyzing the `md_run()` Process**
Okay, so I'm digging into this `level_store` module, and I've hit a specific logic path. My immediate concern is this: if `mddev->pers` is null in `level_store`, the `mddev->level` gets set to `LEVEL_NONE`. Makes sense, so far. But now, when `md_run` is called, here's what happens: `pers = get_pers(mddev->level, mddev->clevel);` which means that the `pers` variable stores a value based on `mddev->level`. Following this, `mddev->level = pers->level;` and `mddev->new_level = mddev->level;`.
So, the critical point is this: what happens *after* `LEVEL_NONE` gets assigned in `level_store`? I need to understand what `get_pers()` does in this scenario with the `LEVEL_NONE` state. And more specifically, I need to see how these `mddev` level variables are changed within the `md_run()` function. Given what I'm looking at, lines 6730-6750 in `md_run()` are definitely going to be the most relevant. I need to figure out what happens when `pers` is retrieved from `get_pers`, as that might be key.
|
| 377/5 |
2026/09/09 21:19 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:6725 LineCount:35]
Results: map[Contents:6725: }
6726:
6727: pers = get_pers(mddev->level, mddev->clevel);
6728: if (!pers)
6729: return -EINVAL;
6730: if (mddev->level != pers->head.id) {
6731: mddev->level = pers->head.id;
6732: mddev->new_level = pers->head.id;
6733: }
6734: strscpy(mddev->clevel, pers->head.name, sizeof(mddev->clevel));
6735:
6736: if (mddev->reshape_position != MaxSector &&
6737: pers->start_reshape == NULL) {
6738: /* This personality cannot handle reshaping... */
6739: put_pers(pers);
6740: return -EINVAL;
6741: }
6742:
6743: if (pers->sync_request) {
6744: /* Warn if this is a potentially silly
6745: * configuration.
6746: */
6747: struct md_rdev *rdev2;
6748: int warned = 0;
6749:
6750: rdev_for_each(rdev, mddev)
6751: rdev_for_each(rdev2, mddev) {
6752: if (rdev < rdev2 &&
6753: rdev->bdev->bd_disk ==
6754: rdev2->bdev->bd_disk) {
6755: pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",
6756: mdname(mddev),
6757: rdev->bdev,
6758: rdev2->bdev);
6759: warned = 1;
]
|
| 378/5 |
2026/09/09 21:19 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 47659
output: 50
thoughts: 611
Thoughts: **My Analysis of this MD Raid Reshape Fix**
Okay, here's what I'm seeing. This is pretty straightforward. The code's behavior here, specifically the handling of `__md_stop()` and the `mddev->reshape_position`, completely clicks. It's all lining up perfectly with how I'd expect it to behave, given what I know about MD Raid architecture.
Essentially, when an array is stopped with `__md_stop()`, there's this specific check: `if (mddev->reshape_position == MaxSector)`. This means if a reshape process was *never* actually started, we need to clean up the partially configured, stale reshape state. It's the right place. The code snippet clears `delta_disks`, `reshape_backwards`, and some related reshape configuration variables within the `mddev` structure. That's a logical and direct approach to ensure a clean teardown when a reshape is aborted before it begins.
Now, let's break this down through the architectural guidelines.
1. **The Sentinel Test:** Absolutely not a problem here. We're not throwing in a temporary band-aid in the `raid5_run` function (the callee). Instead, this fixes a lifecycle invariant at the array's teardown, the place to make the changes. The original safeguard, the `BUG_ON` assertion in `raid5_run`, remains perfectly valid. It's not been invalidated by this fix.
2. **LIFO Stack Unwinding/Lifecycle Symmetry:** Spot on. When the array is shutting down, it's cleaning up any leftover, unstarted reshape configuration. It's bringing the `mddev` back to a clean inactive state which makes perfect sense. This makes the system more stable, more consistent.
3. **Avoid Band-Aid Sentinel Guards:** The core issue was stale state in memory *after* the personality had been torn down. The fix directly addresses the root cause: clearing that stale state during the stop. This restores the invariant that all MD personalities and superblocks depend on.
4. **Scope Constraint:** The patch is impressively concise. 8 lines in `drivers/md/md.c`. This is focused, easy to understand, and unlikely to introduce unforeseen problems.
I have to double-check this, though. Are there any side effects? Can we inadvertently mess with a currently active reshape? Absolutely not. Because the guard `if (mddev->reshape_position == MaxSector)` only affects the scenario where `reshape_position` is *equal* to `MaxSector`. Active reshapes, by definition, have `mddev->reshape_position != MaxSector`, so the fix doesn't interfere with running reshapes. This check guarantees the active reshape is untouched.
What about dm-raid or clustered MD? `md_stop()` calls `__md_stop()`. If dm-raid shuts down an array where reshape never started, then clearing the reshape state *is* the desired behavior. It's correct to do so! The same applies to normal `mdadm` use; if an array is stopped before reshape starts, the reshape did not start and `reshape_position` is `MaxSector`. The fix is appropriate and correct.
Finally, I want to confirm this is not a regression. Let's examine the git history of `drivers/md/md.c`, specifically around `__md_stop` and reshape functions, to ensure there are no existing issues. A quick git-log check around this section will confirm that this patch integrates smoothly and does not regress anything.
|
| 379/5 |
2026/09/09 21:19 |
tool |
git-log |
0m
Error:
Args: map[Count:5 PathPrefix:drivers/md/md.c SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results:
|
| 380/5 |
2026/09/09 21:19 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 49103
output: 37
thoughts: 17
Thoughts: Here's my take on those thoughts:
**Git Log Analysis Strategy**
Okay, so I'm thinking about how to effectively analyze our Git history, specifically when dealing with symbols and their origins. We need a way to pinpoint changes tied to a specific `SymbolName`, and I'm leaning towards using `git-log` for this. However, to make this most efficient and accurate, I need to configure it correctly. I'm going to start with pulling up the data on `SymbolName` and `SourcePath`. I should be able to get what I need without getting bogged down with irrelevant information. I will be sure to omit the `PathPrefix` as this may complicate the results, and will be filtered for relevance in a separate step. This approach should give us a clean, targeted view of the commits related to those symbols, allowing me to better understand the code's evolution without unnecessary noise. This will lay the groundwork for a more in-depth investigation.
|
| 381/5 |
2026/09/09 21:19 |
tool |
git-log |
0m
Args: map[Count:5 SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results: map[Output:cefcb9297fbd md raid: fix hang when stopping arrays with metadata through dm-raid
10787568cc1f md: merge mddev serialize_policy into mddev_flags
26292657add3 md: check before referencing mddev->bitmap_ops
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
ca925302e841 md/md-bitmap: merge md_bitmap_flush() into bitmap_operations
]
|
| 382/5 |
2026/09/09 21:19 |
llm |
patch-reviewer |
0m
Model:
Tokens:
input: 49497
output: 19
thoughts: 66
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing the Solution**
Alright, this fixβ¦ this is good. Really good. It's clean, elegant, and the key is it hits the problem at its core, the actual lifecycle stage, instead of just slapping a patch on the symptom where things blow up. That's *exactly* what we want. This approach maintains subsystem invariants β a critical point we often overlook in the rush to just "get it working." We're not resorting to defensive programming gymnastics here; no band-aids. This solution is solid.
Therefore, I'm going to call `set-results` with `ReviewApproved: true` and an empty `ReviewComments: []`. We're going to proceed accordingly.
|
| 383/5 |
2026/09/09 21:19 |
tool |
set-results |
0m
Args: map[ReviewApproved:true ReviewComments:[]]
Results: map[ReviewApproved:true ReviewComments:[]]
|
| 384/4 |
2026/09/09 21:19 |
action |
evaluate-patch-review |
0m
Results: map[NeedsIteration:false ReviewFeedback:]
|
| 385/1 |
2026/09/09 21:19 |
action |
apply-patch |
0m
Results:
|
| 386/1 |
2026/09/09 21:19 |
action |
init-style-items |
0m
Results:
|
| 387/1 |
2026/09/09 21:19 |
action |
run-checkpatch |
0m
Results: map[CheckpatchOutput:total: 0 errors, 0 warnings, 14 lines checked
Your patch has no obvious style problems and is ready for submission.
]
|
| 388/1 |
2026/09/09 21:19 |
loop |
|
0m
|
| 389/2 |
2026/09/09 21:19 |
iteration |
0 |
0m
|
| 390/3 |
2026/09/09 21:19 |
agent |
checkpatch-arbiter |
0m
Model:
Results:
Instruction:
You are an expert Linux kernel maintainer acting as a code style arbiter.
Your task is to review scripts/checkpatch.pl output and reviewer style requests for a proposed patch.
Determine which reported issues are genuine, actionable formatting/style defects (e.g. indentation, whitespace,
naming, syntax style) and should be fixed. List them in ActionableIssues.
Ignore issues that are false positives, intentional constructs (e.g. BUG_ON/XA_BUG_ON in test files, macros,
subsystem conventions), or unfixable without breaking code logic or tests. If no issues should be changed,
leave ActionableIssues empty.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The patch diff is:
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
The checkpatch.pl output is:
total: 0 errors, 0 warnings, 14 lines checked
Your patch has no obvious style problems and is ready for submission.
Carefully evaluate each issue and populate ActionableIssues.
|
| 391/4 |
2026/09/09 21:19 |
llm |
checkpatch-arbiter |
0m
Model:
Tokens:
input: 626
output: 15
thoughts: 378
Thoughts: **Patch Evaluation - Ready for Submission**
Okay, let's take a look at this patch. First, I ran `checkpatch`, and the output is clean β no errors, no warnings, and a decent number of lines checked, indicating it's looked at more than just a trivial change. Good start. No reviewer comments to address either, which simplifies things.
Now, let's dive into the `diff` itself. The change is in `drivers/md/md.c`. I see a new conditional block within the `__md_stop` function. It seems to be related to reshaping, specifically when `mddev->reshape_position` reaches `MaxSector`. In this case, it resets `delta_disks`, `reshape_backwards`, and copies the metadata (level, layout, chunk_sectors) from the current to the new configuration. This seems logical β it's cleaning up reshape-related state at the end of the process. I don't see any obvious semantic issues here, and the code appears clean and well-formatted, fitting in with the existing style.
Given the clean `checkpatch` output and my quick code review, I'm confident that there are no immediate actionable issues. Time to `set-results` with `ActionableIssues: []`. This patch looks ready to go.
|
| 392/4 |
2026/09/09 21:19 |
tool |
set-results |
0m
Args:
Results:
|
| 393/3 |
2026/09/09 21:19 |
action |
evaluate-checkpatch-arbiter |
0m
Results: map[NeedRefinement:false]
|
| 394/3 |
2026/09/09 21:19 |
action |
If |
0m
Args: map[NeedRefinement:false]
|
| 395/1 |
2026/09/09 21:19 |
agent |
fixes-finder |
22m
Model:
Results: map[FixesHash:91adb56473febeeb3ef657bb5147ddd355465700]
Instruction:
You are an experienced Linux kernel developer tasked with identifying the commit
that introduced the bug being fixed. Identifying the correct buggy commit is crucial
for proper kernel maintenance (backporting to stable trees, etc.).
Your investigation strategy:
1. Examine the patch that fixes the bug. Use git tools (like git-log or git-blame)
to trace the history of the lines or functions modified by the patch.
2. Analyze the stack trace in the crash report. Identify the key files and functions
involved in the crash and investigate their history to see when the problematic
logic was introduced.
3. Compare the bug explanation with the commit history to find the point where
the described logic error first appeared.
A bug is typically introduced when a piece of code is first written, or when
a refactoring changed its logic in a way that introduced the bug.
Trace the history of relevant symbols or find when specific code patterns were introduced/removed.
You must provide exactly one bug-introducing commit hash.
If you are unable to confidently determine the bug-introducing commit after investigation,
return an empty string rather than guessing.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The crash is:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The explanation of the root cause is:
An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
The patch that fixes the bug is:
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
Search for the commit(s) that introduced this bug.
|
| 396/2 |
2026/09/09 21:19 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 7932
output: 38
thoughts: 344
Thoughts: **Analyzing a Kernel Crash and Potential Fix**
Okay, first things first, let's break down this crash report. "Kernel BUG at drivers/md/raid5.c:8117!" and the critical clue: `mddev->delta_disks != 0` within `raid5_run()`. Right, so we've got a RAID5 issue, and the problem seems to be linked to a non-zero `delta_disks` value when it shouldn't be. The description nails it: the root cause is failing to clean up pending reshape parameters when an MD array is stopped *before* the reshape actually begins. Got it. This is a classic race condition scenario, if I'm reading this correctly.
Now, that patch. It's targeting `__md_stop()` in `drivers/md/md.c`. The core of the fix appears to be clearing out those reshape parameters: `mddev->delta_disks`, `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors` *only* if `mddev->reshape_position` is equal to `MaxSector`. That makes perfect sense. Basically, if the reshape hasn't actually started (indicated by `reshape_position` being at `MaxSector`), we need to reset these reshape-related variables. Otherwise, these variables would cause issues with a subsequent start-up.
My next step is to dive into the codebase. I need to understand the full context here. I'm firing up git. Time to trace the history of `__md_stop()`, `do_md_stop()`, `raid5_run()`, and the `update_raid_disks()` function. I'll use `git log`, `git blame`, and maybe some `git grep` to find out how these functions are used, how they interact, and when this potential issue was introduced or when the code changed in a way that introduced this problem. I'll look for related commits and see if there are any other recent changes around the reshape code that might be relevant. This is all about confirming the scope, impact, and correctness of this patch and ensuring it addresses the *root* of the problem.
|
| 397/2 |
2026/09/09 21:19 |
tool |
git-log |
0m
Error:
Args: map[Count:10 PathPrefix:drivers/md/md.c SymbolName:__md_stop]
Results:
|
| 398/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 8808
output: 38
thoughts: 24
Thoughts: Okay, here's my summary, tailored as if I'm an expert in the field:
**Strategic Configuration Choice**
Alright, so the core issue is the co-occurrence constraints for these configuration variables. I need to make a strategic decision here, and it's pretty clear-cut. *SymbolName* and *PathPrefix* are mutually exclusive in this context. However, I can use *SourcePath* in conjunction with *SymbolName*. Given the constraints, that's the more viable path forward. It provides the flexibility I need, and that's the decision I'll base my solution on.
|
| 399/2 |
2026/09/09 21:20 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results: map[Output:cefcb9297fbd md raid: fix hang when stopping arrays with metadata through dm-raid
10787568cc1f md: merge mddev serialize_policy into mddev_flags
26292657add3 md: check before referencing mddev->bitmap_ops
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
ca925302e841 md/md-bitmap: merge md_bitmap_flush() into bitmap_operations
16c4770c75b1 dm-raid: really frozen sync_thread during suspend
f52f5c71f3d4 md: fix stopping sync thread
f2d87a759f68 md: fix missing flush of sync_work
b4128c00a653 md: cleanup mddev_create/destroy_serial_pool()
a865b96c513b Revert "md: unlock mddev before reap sync_thread in action_store"
]
|
| 400/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 9259
output: 37
thoughts: 26
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Investigating the Origins of `__md_stop`**
Alright, I'm thinking, I need to understand the lineage of this `__md_stop` symbol better. Where did it come from? Its usage feels a bit off, and I want to trace it back to its roots. Is there some historical context I'm missing? To get a clear picture, I'm going to delve into the project's version control. Let me look at the commit history further back in time, really trace its initial introduction and any subsequent modifications. Failing that, a `git blame` on `__md_stop` is going to be the fastest way to get to the author and the context of the code that introduced it. That should help me understand the intention behind its creation and if there's any implicit behavior that has crept into the code base. Let's dig in and figure this out.
|
| 401/2 |
2026/09/09 21:20 |
tool |
git-blame |
0m
Args: map[End:7110 File:drivers/md/md.c Start:7085]
Results: map[Output:6177b472ab14e 7085) {
36d091f4759d1 7086) struct md_personality *pers = mddev->pers;
a2bd70319290d 7087)
5aa61f427e497 7088) mddev_detach(mddev);
2a79365b2278f 7089) md_bitmap_destroy(mddev);
36d091f4759d1 7090) spin_lock(&mddev->lock);
6177b472ab14e 7091) mddev->pers = NULL;
36d091f4759d1 7092) spin_unlock(&mddev->lock);
07641b5f32f69 7093) if (mddev->private)
07641b5f32f69 7094) pers->free(mddev, mddev->private);
bd6919228d7e1 7095) mddev->private = NULL;
9faab548974e3 7096) put_pers(pers);
cca9cf90c504d 7097) clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
6aaa58c994277 7098) }
6aaa58c994277 7099)
6aaa58c994277 7100) void md_stop(struct mddev *mddev)
6aaa58c994277 7101) {
7d5fff8982a21 7102) lockdep_assert_held(&mddev->reconfig_mutex);
7d5fff8982a21 7103)
6aaa58c994277 7104) /* stop the array and free an attached data structures.
6aaa58c994277 7105) * This is called from dm-raid
6aaa58c994277 7106) */
0dd84b319352b 7107) __md_stop_writes(mddev);
6aaa58c994277 7108) __md_stop(mddev);
5eff3c439d347 7109) }
5eff3c439d347 7110)
]
|
| 402/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 10245
output: 37
thoughts: 70
Thoughts: Here's my summary, as though I'm thinking through this:
**Analyzing the `__md_stop` Call**
Okay, so I'm tracking down this `__md_stop` call. The system's telling me about it, so I need to understand what's happening. The specific line in question is 7085, and it's located within `static void __md_stop(struct mddev *mddev)`. Alright, that narrows it down immediately to a critical function dealing with stopping a multi-device setup, as the struct `mddev` confirms.
Now, I need to get a better handle on the context. Let's pull up lines 7070 through 7085 of `drivers/md/md.c`. I need the full picture to understand the call's parameters and the potential issues that might arise. This range should include the function signature itself (the declaration) so I can verify parameter types, which are already confirmed in the call. Then, I can look at the surrounding lines to figure out where we are in the flow and understand the logic around the call. Plus, seeing the blame information might point to who most recently touched this code, which can provide insight into the change history. This is likely a key point in the multi-device driver, so the surrounding logic is going to be important.
|
| 403/2 |
2026/09/09 21:20 |
tool |
git-blame |
0m
Args: map[End:7085 File:drivers/md/md.c Start:7070]
Results: map[Output:5aa61f427e497 7070) {
26292657add33 7071) if (md_bitmap_enabled(mddev, false))
3fe5b7c9fb72c 7072) mddev->bitmap_ops->wait_behind_writes(mddev);
d19329133d25a 7073) if (mddev->pers && mddev->pers->quiesce && !is_md_suspended(mddev)) {
5aa61f427e497 7074) mddev->pers->quiesce(mddev, 1);
5aa61f427e497 7075) mddev->pers->quiesce(mddev, 0);
5aa61f427e497 7076) }
7eb8ff02c1df2 7077) md_unregister_thread(mddev, &mddev->thread);
396799eb5b6f8 7078)
396799eb5b6f8 7079) /* the unplug fn references 'conf' */
176df894d7974 7080) if (!mddev_is_dm(mddev))
396799eb5b6f8 7081) blk_sync_queue(mddev->gendisk->queue);
5aa61f427e497 7082) }
5aa61f427e497 7083)
5eff3c439d347 7084) static void __md_stop(struct mddev *mddev)
6177b472ab14e 7085) {
]
|
| 404/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 11132
output: 26
thoughts: 86
Thoughts: Okay, let's break this down.
**Initial Assessment of Git Commit IDs**
Right, so I'm looking at these two commit IDs: `5eff3c439d347` and `6aaa58c994277`. The immediate question is, what do they represent? Given my expertise, I instantly recognize these as likely Git commit hashes. Now, the next logical step is to delve into what each commit actually *did*. I need to inspect the changes introduced by both `5eff3c439d347` and `6aaa58c994277`. The context is currently missing, but the intention is to understand the scope and nature of the alterations.
|
| 405/2 |
2026/09/09 21:20 |
tool |
git-show |
0m
Args: map[Commit:5eff3c439d347]
Results: map[Output:commit 5eff3c439d3478ba9e8ba5f8c0aaf6e6fadb6e58
Author: NeilBrown <neil@brown.name>
Date: Mon Nov 19 10:47:48 2012 +1100
md: make sure everything is freed when dm-raid stops an array.
md_stop() would stop an array, but not free various attached
data structures.
For internal arrays, these are freed later in do_md_stop() or
mddev_put(), but they don't apply for dm-raid arrays.
So get md_stop() to free them, and only all it from dm-raid.
For internal arrays we now call __md_stop.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4c7d880a60a4..61200717687b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5294,7 +5294,7 @@ void md_stop_writes(struct mddev *mddev)
}
EXPORT_SYMBOL_GPL(md_stop_writes);
-void md_stop(struct mddev *mddev)
+static void __md_stop(struct mddev *mddev)
{
mddev->ready = 0;
mddev->pers->stop(mddev);
@@ -5304,6 +5304,18 @@ void md_stop(struct mddev *mddev)
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+
+void md_stop(struct mddev *mddev)
+{
+ /* stop the array and free an attached data structures.
+ * This is called from dm-raid
+ */
+ __md_stop(mddev);
+ bitmap_destroy(mddev);
+ if (mddev->bio_set)
+ bioset_free(mddev->bio_set);
+}
+
EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
@@ -5364,7 +5376,7 @@ static int do_md_stop(struct mddev * mddev, int mode,
set_disk_ro(disk, 0);
__md_stop_writes(mddev);
- md_stop(mddev);
+ __md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
]
|
| 406/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 12155
output: 36
thoughts: 686
Thoughts: **My Analysis of the RAID5 Reshape Bug**
Okay, let's break this down. First, I need to really understand the sequence of events. The user creates a RAID5 array; it's active, the personality is attached. Then they trigger a reshape by changing the number of disks, which is where things start to go sideways. Specifically, `update_raid_disks()` sets `mddev->delta_disks = 1` and calls the personality's `check_reshape`. Crucially, though, the reshape *doesn't* start immediately; `mddev->reshape_position` stays at `MaxSector`.
Here's the problem: The user then stops the array *before* the reshape can begin. The `__md_stop()` function detaches the personality, frees private data... but **doesn't clear** the pending reshape parameters, like this `mddev->delta_disks` value. If the array were completely stopped, `md_clean()` would be called, and these fields *would* be cleared, but this "partial stop" bypasses that crucial cleanup.
Now, when the user restarts the array, `raid5_run()` gets called, which checks for a reshape in progress. Because the reshape never started, `mddev->reshape_position` is still at `MaxSector`, it *expects* no pending reshape parameters. However, `mddev->delta_disks` is still hanging around with a value of 1 from the reshape request, leading to the `BUG_ON()`.
This is inconsistent! The MD core's superblock handling, as seen in `super_1_validate()` and `super_90_validate()`, already has a mechanism to discard pending reshape parameters when `MD_FEATURE_RESHAPE_ACTIVE` is not set. A pending reshape that hasn't started is a purely in-memory thing. It *should* be aborted when the array is stopped, just like the superblock handling.
My next step is to dig into the code! I'm going to carefully examine the `md_clean()`, `do_md_stop()`, and `update_raid_disks()` functions, and also see exactly where that `BUG_ON()` is in `raid5_run()`. I might also check recently touched areas like `array_state_store`, as well! Specifically, I'll start with `do_md_stop` because it appears to be the most likely culprit.
|
| 407/2 |
2026/09/09 21:20 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:do_md_stop]
Results: map[SourceCode:7158: /* mode:
7159: * 0 - completely stop and dis-assemble array
7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
SourceFile:drivers/md/md.c]
|
| 408/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 14562
output: 34
thoughts: 20
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the `md_clean(mddev)` Function**
Alright, let's dive into this `md_clean(mddev)` function. My initial instinct is to go beyond a cursory glance; I need to understand its core behavior within the broader `md` framework. I want to know exactly what cleanup tasks it's responsible for. Is this the primary cleanup function, or a helper? What kind of metadata is it likely operating on, and what's the nature of the cleanup being performed? For a given `mddev`, this function must be handling the specific cleaning, but what is that? Does it involve marking blocks as clean, re-writing parity, checking consistency, invalidating stale data, or something else entirely? A solid grasp of the specifics here is crucial. The nuances of implementation are critical: is it resource-intensive? What locking mechanisms are in place, and are they efficient, or potential bottlenecks? Let's take a proper look.
|
| 409/2 |
2026/09/09 21:20 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 410/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 16034
output: 38
thoughts: 155
Thoughts: **Analyzing the Kernel's RAID5 Code**
Okay, here's what I'm thinking as I dive into this `md_clean` function within the RAID5 code. I'm focusing on these lines:
```c
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = LEVEL_NONE;
mddev->new_layout = 0;
mddev->new_chunk_sectors = 0;
```
My initial question is, when did this piece of code specifically come into play? Was it when `md_clean` itself was introduced or altered? Or, maybe it's tied to the introduction of that `BUG_ON` call in `raid5_run`? Or, could it be linked to the implementation of reshape operations or the function for updating RAID disks? It is important to know which.
The best approach seems to be to leverage the tools available. I'll need to go back and use `git blame` or `git-log` on that `raid5_run` function. Specifically, I'll need to examine the history around line 8117 (or a similar location) to get some historical context. That will hopefully shed some light on the history of this part of the code and reveal the changes I'm interested in.
|
| 411/2 |
2026/09/09 21:20 |
tool |
git-blame |
0m
Args: map[End:8130 File:drivers/md/raid5.c Start:8105]
Results: map[Output:05256d9884d32 8105) here_old * chunk_sectors + (-min_offset_diff))) {
91adb56473feb 8106) /* Reading from the same stripe as writing to - bad */
cc6167b4f3b3c 8107) pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
cc6167b4f3b3c 8108) mdname(mddev));
c567c86b90d47 8109) return -EINVAL;
91adb56473feb 8110) }
cc6167b4f3b3c 8111) pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
91adb56473feb 8112) /* OK, we should be able to continue; */
91adb56473feb 8113) } else {
91adb56473feb 8114) BUG_ON(mddev->level != mddev->new_level);
91adb56473feb 8115) BUG_ON(mddev->layout != mddev->new_layout);
664e7c413f1e9 8116) BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
91adb56473feb 8117) BUG_ON(mddev->delta_disks != 0);
^1da177e4c3f4 8118) }
91adb56473feb 8119)
3418d036c81dc 8120) if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
3418d036c81dc 8121) test_bit(MD_HAS_PPL, &mddev->flags)) {
3418d036c81dc 8122) pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
3418d036c81dc 8123) mdname(mddev));
3418d036c81dc 8124) clear_bit(MD_HAS_PPL, &mddev->flags);
ddc088238cd69 8125) clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
3418d036c81dc 8126) }
3418d036c81dc 8127)
245f46c2c221e 8128) if (mddev->private == NULL)
245f46c2c221e 8129) conf = setup_conf(mddev);
245f46c2c221e 8130) else
]
|
| 412/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 17360
output: 24
thoughts: 31
Thoughts: Okay, let's break this down.
**Initial Assessment: Unfamiliar Identifier**
Alright, staring at this jumble of characters: `91adb56473feb`. My first instinct is, what is this? It's a hex string, obviously, but what *does* it represent? Without any context, it's just a meaningless sequence. I immediately begin to consider the possibilities, based on my experience. Could it be a hash, an ID, a cryptographic key fragment, or maybe a file identifier? The length is a factor. Is it a standard size for something specific? I need to know where this came from to even begin to guess.
|
| 413/2 |
2026/09/09 21:20 |
tool |
git-show |
0m
Args: map[Commit:91adb56473feb]
Results: map[Output:commit 91adb56473febeeb3ef657bb5147ddd355465700
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:39 2009 +1100
md/raid5: refactor raid5 "run"
.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index edbc80c4d346..d019a85547b4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4164,95 +4164,49 @@ static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- int working_disks = 0;
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
}
- if ((mddev->level == 5 && !algorithm_valid_raid5(mddev->layout)) ||
- (mddev->level == 6 && !algorithm_valid_raid6(mddev->layout))) {
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
printk(KERN_ERR "raid5: %s: layout %d not supported\n",
- mdname(mddev), mddev->layout);
- return -EIO;
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
}
-
- if (mddev->chunk_size < PAGE_SIZE) {
- printk(KERN_ERR "md/raid5: chunk_size must be at least "
- "PAGE_SIZE but %d < %ld\n",
- mddev->chunk_size, PAGE_SIZE);
- return -EINVAL;
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
- int max_degraded = (mddev->level == 5 ? 1 : 2);
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "(reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old
- * geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*
- (mddev->raid_disks - max_degraded))) {
- printk(KERN_ERR "raid5: reshape_position not "
- "on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*
- (old_disks-max_degraded));
- /* here_old is the first stripe that we might need to read
- * from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for "
- "auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
}
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
@@ -4264,13 +4218,12 @@ static int run(mddev_t *mddev)
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
}
spin_lock_init(&conf->device_lock);
- mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4299,41 +4252,136 @@ static int run(mddev_t *mddev)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
} else
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
conf->expand_progress = mddev->reshape_position;
- /* device size must be a multiple of chunk size */
- mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
- mddev->resync_max_sectors = mddev->dev_sectors;
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
+ goto abort;
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 5 ? 1 : 2);
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "(reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+ conf = setup_conf(mddev);
+
+ if (conf == NULL)
+ return -EIO;
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
@@ -4341,6 +4389,10 @@ static int run(mddev_t *mddev)
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
@@ -4356,27 +4408,6 @@ static int run(mddev_t *mddev)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
" devices, algorithm %d\n", conf->level, mdname(mddev),
@@ -4419,6 +4450,8 @@ static int run(mddev_t *mddev)
"raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ mddev->queue->queue_lock = &conf->device_lock;
+
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
@@ -4430,7 +4463,11 @@ static int run(mddev_t *mddev)
return 0;
abort:
+ if (mddev->thread)
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 84456b1af204..c172371481c7 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -386,6 +386,11 @@ struct raid5_private_data {
int pool_size; /* number of disks in stripeheads in pool */
spinlock_t device_lock;
struct disk_info *disks;
+
+ /* When taking over an array from a different personality, we store
+ * the new thread here until we fully activate the array.
+ */
+ struct mdk_thread_s *thread;
};
typedef struct raid5_private_data raid5_conf_t;
]
|
| 414/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 22646
output: 39
thoughts: 588
Thoughts: **Tracing the Evolution of RAID Stopping Logic**
Okay, so I'm digging into this RAID code, and my initial thought was that the `BUG_ON` checks, particularly the one regarding `mddev->delta_disks`, were introduced in commit `91adb56473feb` back in 2009. But that feels a bit too straightforward, and I have a nagging feeling that the relevant logic might be intertwined with the `do_md_stop` path.
My first thought is, was it really that simple? Did `91adb56473feb` really just introduce those checks in isolation, or was it a part of a larger refactoring related to stopping or restarting RAID arrays? My experience tells me these things are usually part of a larger change.
So, I need to methodically trace the evolution. Let's start by looking at `do_md_stop` and related functions, historically. The commit `5eff3c439d347` (from 2012) looks like a good place to start. It seems like it changed how `do_md_stop` interacts with `md_stop`. Notice that, at that time, `md_stop` was renamed to `__md_stop`. Interesting.
Now, before that commit, `md_stop` had a very different role and likely behaved differently, and maybe it interacted with `delta_disks` or array states. The older implementation of `md_stop` might have been doing something differently, especially regarding the state of the array. The current commit doesn't seem to clear the `mddev->delta_disks`, which is really what is making me think.
So, the next step is to examine the history of `do_md_stop` more thoroughly. I need to trace it through the git history to see how it interacted with `md_clean` and other functions and how the array state was affected during these stops. I'm looking for clues about where and how `delta_disks` might have been handled, and whether these changes led to the addition of those `BUG_ON` checks.
|
| 415/2 |
2026/09/09 21:20 |
tool |
git-log |
0m
Args: map[Count:15 SourcePath:drivers/md/md.c SymbolName:do_md_stop]
Results: map[Output:650b2e69ff6a md: clean up openers check in do_md_stop() and md_set_readonly()
f72ffdd68616 md: remove unwanted white space from md.c
a05b7ea03d72 md: avoid crash when stopping md array races with closing other open fds.
fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
a4bd82d0d03b md: split md_set_readonly out of do_md_stop
df5b20cf68f9 md: Better control of when do_md_stop is allowed to stop the array.
9e653b6342c9 [PATCH] md: Set/get state of array via sysfs
]
|
| 416/2 |
2026/09/09 21:20 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 23934
output: 40
thoughts: 98
Thoughts: **Diving into the MD RAID Code**
Okay, so I'm looking at this patch, `9e653b6342c9`, which seems to be dealing with setting and getting the RAID array state via sysfs. My initial thought is, "Hold on a second, isn't there already a function, `array_state_store`, that handles this kind of thing?" Gotta double-check that. Let's dig into `array_state_store` and see what's going on there. Wait a minute; I need to recall when `update_raid_disks` was introduced or modified. While I'm at it, what about `raid_disks_store`? This could be related. Let me investigate `update_raid_disks` next. I need to keep the interactions in mind to follow the complete flow here.
|
| 417/2 |
2026/09/09 21:21 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:update_raid_disks]
Results: map[Output:fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
da943b9912df [PATCH] md: allow md/raid_disks to be settable
96de1e663cda [PATCH] md: fix some locking and module refcounting issues with md's use of sysfs
eae1701fbd26 [PATCH] md: initial sysfs support for md
]
|
| 418/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 24377
output: 28
thoughts: 494
Thoughts: **Investigating the Introduction of Reshape for RAID5**
Okay, hold on a second. I need to pinpoint when reshape functionality was actually introduced for RAID5. It's bothering me. Diving into `raid5_run`... I'm wondering, was there a `BUG_ON` call in the code *before* commit `91adb56473feb`? Let me go back and examine `91adb56473feb` closely.
Alright, looking at the diff in `91adb56473feb`... Before that commit, the code snippet looked like this:
```c
- if (mddev->reshape_position != MaxSector) {
...
- }
-
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
```
There's no `else` branch there with a `BUG_ON`! Wait... am I misremembering? Let me re-check that crucial commit, `91adb56473feb`. Okay, here's what NeilBrown added:
```c
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
```
Now I see it. NeilBrown added those `BUG_ON` checks, but *why*? What was the motivation behind that? And... was `delta_disks` even a concept *before* `91adb56473feb`? I need to check the history. I should use `git log -S delta_disks` or search around that commit to find related changes. Let me also check what NeilBrown was doing around March 31, 2009. That should give me the context I need.
|
| 419/2 |
2026/09/09 21:21 |
tool |
git-log |
0m
Args: map[Count:20 MessageRegexps:[raid5 reshape]]
Results: map[Output:661102bb87e4 md/raid5: split reshape bios before bitmap accounting
816b25aca5b3 md/raid5: wire llbitmap reshape lifecycle
05a1b89689df md/raid5: reject llbitmap reshape when md chunk shrinks
9f59258d3004 md/raid5: add exact old and new llbitmap mapping helpers
629c1659e90c md/md-llbitmap: add reshape range mapping helpers
ffd3e73d6e0c md: add helper to split bios at reshape offset
a41bb2ee1aca md/raid5: reject zero-sector reshape chunks
85764f475f3b md/raid5: complete discard bios while reshape is active
a47431dfb353 md/raid5: protect lockless recovery_offset accesses during reshape
788e4139463f md/raid5: fix reshape deadlock while failed devices more than max degraded
418b3e64e445 md/raid5: Fix UAF on IO across the reshape position
cf86bb53b9c9 md: wake raid456 reshape waiters before suspend
8ff59a72478d md: move finish_reshape to md_finish_sync()
7799eaecfeb7 dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
1320fe874175 md/raid5: merge reshape_progress checking inside get_reshape_loc()
6f039cc42f21 md/raid5: rename wait_for_overlap to wait_for_reshape
0e4aac736666 md/raid5: only add to wq if reshape is in progress
25b3a8237a03 md/raid5: recheck if reshape has finished with device_lock held
305a5170dc5c md/raid5: avoid BUG_ON() while continue reshape after reassembling
611d5cbc0b35 md: fix deadlock between mddev_suspend and flush bio
]
|
| 420/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 25870
output: 26
thoughts: 54
Thoughts: Here's my summary, as though I'm processing this information:
**Analyzing a RAID5 Reshape Bugfix**
Okay, so I'm digging into commit `305a5170dc5c`. The commit message is pretty clear: "md/raid5: avoid BUG_ON() while continue reshape after reassembling." My initial thought is, "Ah, sounds like a pretty critical fix, dealing with potential data corruption or unexpected behavior during a RAID5 reshape operation, specifically after a reassembly event." I need to understand why a `BUG_ON()` was happening here. This strongly suggests a critical inconsistency was detected during reshape which could have led to a system halt. It's obviously not desirable.
My immediate next step is to examine the diff for this commit. I need to see *where* the `BUG_ON()` was located, and *how* this fix prevents it. I'll be looking for the specific conditions that triggered the bug and how the code has changed to handle those conditions more gracefully, likely by adding checks, correcting calculations, or altering control flow. Given the context of a RAID5 reshape and reassembly, the bug is probably related to inconsistencies in data placement, parity calculations, or metadata updates during this process. I'll need to confirm that any added checks are robust and don't introduce a performance bottleneck. I need to ensure the fix maintains data integrity.
|
| 421/2 |
2026/09/09 21:21 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49
Author: Yu Kuai <yukuai3@huawei.com>
Date: Tue Jun 11 21:22:51 2024 +0800
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 013adc5ba0e1..547fd15115cd 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -6254,7 +6254,9 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->reshape_backwards) {
- BUG_ON(writepos < reshape_sectors);
+ if (WARN_ON(writepos < reshape_sectors))
+ return MaxSector;
+
writepos -= reshape_sectors;
readpos += reshape_sectors;
safepos += reshape_sectors;
@@ -6272,14 +6274,18 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
* to set 'stripe_addr' which is where we will write to.
*/
if (mddev->reshape_backwards) {
- BUG_ON(conf->reshape_progress == 0);
+ if (WARN_ON(conf->reshape_progress == 0))
+ return MaxSector;
+
stripe_addr = writepos;
- BUG_ON((mddev->dev_sectors &
- ~((sector_t)reshape_sectors - 1))
- - reshape_sectors - stripe_addr
- != sector_nr);
+ if (WARN_ON((mddev->dev_sectors &
+ ~((sector_t)reshape_sectors - 1)) -
+ reshape_sectors - stripe_addr != sector_nr))
+ return MaxSector;
} else {
- BUG_ON(writepos != sector_nr + reshape_sectors);
+ if (WARN_ON(writepos != sector_nr + reshape_sectors))
+ return MaxSector;
+
stripe_addr = sector_nr;
}
]
|
| 422/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 27466
output: 36
thoughts: 343
Thoughts: **Analyzing a Recent Patch in the Linux Kernel's MD Driver**
Alright, that `305a5170dc5c` commit... that's just a reshape request, so I can safely disregard that. I need to focus on this patch itself. Let's dig in and see what's changed in `drivers/md/md.c`.
Okay, the `diff` shows a modification around line 7095 in the file. I'll take a look at the code:
```
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
```
Now, let me analyze what this means. It appears the patch is adding some additional logic to `__md_stop`. Specifically, it checks if `mddev->reshape_position` is equal to `MaxSector`. If so, it's essentially resetting some parameters related to a reshape operation: `delta_disks`, `reshape_backwards`, and restoring the original configuration for `level`, `layout` and `chunk_sectors`. It looks like it's cleaning up the state of a reshape once the reshape is complete. Good, that's what I was expecting. It's important to make sure the cleanup happens correctly. I'll need to verify that this logic is correct with respect to other components of the RAID system, but it's a reasonably safe looking patch.
|
| 423/2 |
2026/09/09 21:21 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7085 LineCount:25]
Results: map[Contents:7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
]
|
| 424/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 28696
output: 37
thoughts: 530
Thoughts: **Analyzing the `md_stop` Patch and Related Functions**
Alright, let's break this down. My initial observation is focused on this patch and specifically the `__md_stop` function. I see that within that function, we have these lines clearing:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
Okay, so when a reshape is done we're effectively resetting those variables. That makes sense on the face of it. Now I compare that to what `md_clean()` is doing:
```c
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = LEVEL_NONE;
mddev->new_layout = 0;
mddev->new_chunk_sectors = 0;
```
Interesting, `md_clean` sets them to zero too, but here `new_level`, `new_layout` and `new_chunk_sectors` are being explicitly cleared, instead of being set to what they were! That's a definite point of difference.
Then, there's `raid5_run`:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
And this is where the flags are used! Wait a second... why are we bug-checking those *before* the reshape? The implication is that these values should be unchanged *unless* the reshape is still ongoing, and if it is ongoing, then it must be set up correctly already! Okay, so something's not adding up in the logic. If `mddev->reshape_position` isn't `MaxSector` then these should be the same as they were! If the reshape *is* done, then why are we making sure these are the same? It's nonsensical.
The underlying question then becomes: where did these variables, `delta_disks`, `new_level`, `new_layout`, and `new_chunk_sectors` come from in the first place, and what's the history of these variables? They seem crucial for understanding the reshape process. To fully understand this, I need to check when `md_clean` got those variables, and when `new_chunk_sectors` was introduced. Time to do a `git-log` on `md_clean` in `drivers/md/md.c`. This should reveal the context and the rationale behind those changes. This should provide some much needed context.
|
| 425/2 |
2026/09/09 21:21 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:md_clean]
Results: map[Output:62ed1b582246 md: allow configuring logical block size
25db5f284fb8 md: add legacy_async_del_gendisk mode
907a99c314a5 md: rename recovery_cp to resync_offset
5f286f33553d md: Don't clear MD_CLOSING until mddev is freed
9674f54e41ff md: Don't clear MD_CLOSING when the raid is about to stop
a1d767191096 md: use mddev->external to select holder in export_rdev()
ed821cf84e7b md: use MD_RESYNC_* whenever possible
f97a5528b21e md: introduce md_ro_state
2953079c692d md: separate flags for superblock changes
c20c33f0e2ab md-cluster: clean related infos of cluster
]
|
| 426/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 30194
output: 37
thoughts: 47
Thoughts: Okay, let's break this down. My thought process here is pretty straightforward, driven by a need for granular understanding of this specific code segment.
**Pinpointing the Evolution of a Crucial Function**
I need to understand the history of `delta_disks` and related variables within the `md_clean` function in the `md.c` driver. Since I'm already familiar with the codebase, my first instinct is to use `git blame` β it's the perfect tool for this type of investigation. I want to see *when* and, importantly, *why* these specific additions were made. The goal is to understand the context of this code block, potentially tracing back design decisions or bug fixes that led to its current state. I know the line numbers where the variables are located, so I'll be sure to provide those to `git blame` for a fine-grained result.
|
| 427/2 |
2026/09/09 21:21 |
tool |
git-blame |
0m
Args: map[End:7015 File:drivers/md/md.c Start:7000]
Results: map[Output:6177b472ab14e 7000) mddev->chunk_sectors = 0;
6177b472ab14e 7001) mddev->ctime = mddev->utime = 0;
6177b472ab14e 7002) mddev->layout = 0;
62ed1b5822463 7003) mddev->logical_block_size = 0;
6177b472ab14e 7004) mddev->max_disks = 0;
6177b472ab14e 7005) mddev->events = 0;
a8707c08f4f71 7006) mddev->can_decrease_events = 0;
6177b472ab14e 7007) mddev->delta_disks = 0;
2c810cddc44d6 7008) mddev->reshape_backwards = 0;
6177b472ab14e 7009) mddev->new_level = LEVEL_NONE;
6177b472ab14e 7010) mddev->new_layout = 0;
6177b472ab14e 7011) mddev->new_chunk_sectors = 0;
ed821cf84e7b9 7012) mddev->curr_resync = MD_RESYNC_NONE;
7f7583d420231 7013) atomic64_set(&mddev->resync_mismatches, 0);
6177b472ab14e 7014) mddev->suspend_lo = mddev->suspend_hi = 0;
6177b472ab14e 7015) mddev->sync_speed_min = mddev->sync_speed_max = 0;
]
|
| 428/2 |
2026/09/09 21:21 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 31023
output: 27
thoughts: 35
Thoughts: Okay, here's my interpretation of that prompt, rendered in the first person, assuming the user is an expert.
**Initial Assessment of Commit `6177b472ab14e`**
Alright, let's dive into this commit, `6177b472ab14e`. Immediately, my mind starts racing. I'm seeing this SHA-1 hash, and my first instinct is to understand its context. Where does it fit? What branch is it on? What project are we talking about? Is this from the codebase I'm currently working on, or is this some legacy system? Is there an issue ticket associated with this? This hash alone is meaningless without that vital contextual information to ground it. Itβs like being handed a complex mathematical equation without any variables defined β frustrating!
|
| 429/2 |
2026/09/09 21:21 |
tool |
git-show |
0m
Args: map[Commit:6177b472ab14e]
Results: map[Output:commit 6177b472ab14e1ac88896960370dd54ba577d926
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 29 11:37:13 2010 +1100
md: start to refactor do_md_stop
do_md_stop is large and clunky, so hard to understand.
This is a first step of refactoring, pulling two simple
sub-functions out.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e752332268d2..002d0a34d6ea 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4568,6 +4568,58 @@ void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
+static void md_clean(mddev_t *mddev)
+{
+ mddev->array_sectors = 0;
+ mddev->external_size = 0;
+ mddev->dev_sectors = 0;
+ mddev->raid_disks = 0;
+ mddev->recovery_cp = 0;
+ mddev->resync_min = 0;
+ mddev->resync_max = MaxSector;
+ mddev->reshape_position = MaxSector;
+ mddev->external = 0;
+ mddev->persistent = 0;
+ mddev->level = LEVEL_NONE;
+ mddev->clevel[0] = 0;
+ mddev->flags = 0;
+ mddev->ro = 0;
+ mddev->metadata_type[0] = 0;
+ mddev->chunk_sectors = 0;
+ mddev->ctime = mddev->utime = 0;
+ mddev->layout = 0;
+ mddev->max_disks = 0;
+ mddev->events = 0;
+ mddev->delta_disks = 0;
+ mddev->new_level = LEVEL_NONE;
+ mddev->new_layout = 0;
+ mddev->new_chunk_sectors = 0;
+ mddev->curr_resync = 0;
+ mddev->resync_mismatches = 0;
+ mddev->suspend_lo = mddev->suspend_hi = 0;
+ mddev->sync_speed_min = mddev->sync_speed_max = 0;
+ mddev->recovery = 0;
+ mddev->in_sync = 0;
+ mddev->degraded = 0;
+ mddev->barriers_work = 0;
+ mddev->safemode = 0;
+ mddev->bitmap_info.offset = 0;
+ mddev->bitmap_info.default_offset = 0;
+ mddev->bitmap_info.chunksize = 0;
+ mddev->bitmap_info.daemon_sleep = 0;
+ mddev->bitmap_info.max_write_behind = 0;
+}
+
+static void md_stop(mddev_t *mddev)
+{
+ mddev->pers->stop(mddev);
+ if (mddev->pers->sync_request && mddev->to_remove == NULL)
+ mddev->to_remove = &md_redundancy_group;
+ module_put(mddev->pers->owner);
+ mddev->pers = NULL;
+
+}
+
/* mode:
* 0 - completely stop and dis-assemble array
* 1 - switch to readonly
@@ -4608,14 +4660,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mddev->ro)
set_disk_ro(disk, 0);
- mddev->pers->stop(mddev);
+ md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- module_put(mddev->pers->owner);
- if (mddev->pers->sync_request && mddev->to_remove == NULL)
- mddev->to_remove = &md_redundancy_group;
- mddev->pers = NULL;
+
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4663,44 +4712,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
export_array(mddev);
- mddev->array_sectors = 0;
- mddev->external_size = 0;
- mddev->dev_sectors = 0;
- mddev->raid_disks = 0;
- mddev->recovery_cp = 0;
- mddev->resync_min = 0;
- mddev->resync_max = MaxSector;
- mddev->reshape_position = MaxSector;
- mddev->external = 0;
- mddev->persistent = 0;
- mddev->level = LEVEL_NONE;
- mddev->clevel[0] = 0;
- mddev->flags = 0;
- mddev->ro = 0;
- mddev->metadata_type[0] = 0;
- mddev->chunk_sectors = 0;
- mddev->ctime = mddev->utime = 0;
- mddev->layout = 0;
- mddev->max_disks = 0;
- mddev->events = 0;
- mddev->delta_disks = 0;
- mddev->new_level = LEVEL_NONE;
- mddev->new_layout = 0;
- mddev->new_chunk_sectors = 0;
- mddev->curr_resync = 0;
- mddev->resync_mismatches = 0;
- mddev->suspend_lo = mddev->suspend_hi = 0;
- mddev->sync_speed_min = mddev->sync_speed_max = 0;
- mddev->recovery = 0;
- mddev->in_sync = 0;
- mddev->degraded = 0;
- mddev->barriers_work = 0;
- mddev->safemode = 0;
- mddev->bitmap_info.offset = 0;
- mddev->bitmap_info.default_offset = 0;
- mddev->bitmap_info.chunksize = 0;
- mddev->bitmap_info.daemon_sleep = 0;
- mddev->bitmap_info.max_write_behind = 0;
+ md_clean(mddev);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
]
|
| 430/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 33157
output: 39
thoughts: 68
Thoughts: **Investigating the `mddev->delta_disks = 0` Initialization**
Okay, let's dive into this. I need to figure out the history surrounding the introduction of setting `mddev->delta_disks = 0` within the `do_md_stop` function, specifically *before* commit `6177b472ab14e`. This seems like a fairly straightforward task, but tracking down the *when* is key. My instinct is to use `git log` to trace the commit history, and the `-S` option is perfect for searching for the string "delta_disks". I'll narrow the search to the relevant file, `drivers/md/md.c`, to keep the results focused. So, the command will be `git log -S delta_disks drivers/md/md.c`. That should give me the relevant commits, hopefully with good commit messages. From there, I can analyze the results to pinpoint the exact commit I need and understand the context surrounding that change. This feels like it should be quick. Let's see what `git` reveals!
|
| 431/2 |
2026/09/09 21:22 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks Count:10 PathPrefix:drivers/md/md.c]
Results: map[Output:6dd3aa08e83b md: factor out sync completion update into helper
cb0780ad4333 md: add helper rdev_needs_recovery()
d8730f0cf4ef md: Remove deprecated CONFIG_MD_MULTIPATH
7564beda19b3 md-cluster/raid10: support add disk under grow mode
8876391e440b md: fix a potential deadlock of raid5/raid10 reshape
db0505d32066 md: be cautious about using ->curr_resync_completed for ->recovery_offset
f2076e7d0643 MD: set journal disk ->raid_disk
db721d32b74b md: level_store: group all important changes into one place.
2c810cddc44d md: allow a reshape operation to be reversed.
de171cb9a525 md: revert change to raid_disks on failure.
]
|
| 432/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 33753
output: 47
thoughts: 23
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Investigating `delta_disks` in `drivers/md/md.c` History**
Okay, so I need to understand the evolution of how `delta_disks` is handled within `drivers/md/md.c`. My immediate thought is to trace the relevant commits. I'll start by leveraging my git expertise; the command I'll likely use is something along the lines of `git log -p drivers/md/md.c | grep 'delta_disks'` (or a more targeted variation, perhaps specifying a date range or author if I have any preliminary clues). The aim is to quickly identify the key commits that introduce, modify, or remove any code related to `delta_disks`. I'm expecting to see modifications to the data structures involved, potentially the introduction of new functions, and certainly changes to how the RAID algorithms utilize and manage those disks. I'll pay close attention to the context of each commitβthe surrounding code, commit messages, and any bug reports referencedβas that will provide crucial insight into the rationale behind the changes and any potential pitfalls. This preliminary investigation will help me to understand any issues or improvements with the implementation of `delta_disks` in that context.
|
| 433/2 |
2026/09/09 21:22 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks Count:15 PathPrefix:drivers/md/md.c Since:20 years]
Results: map[Output:6dd3aa08e83b md: factor out sync completion update into helper
cb0780ad4333 md: add helper rdev_needs_recovery()
d8730f0cf4ef md: Remove deprecated CONFIG_MD_MULTIPATH
7564beda19b3 md-cluster/raid10: support add disk under grow mode
8876391e440b md: fix a potential deadlock of raid5/raid10 reshape
db0505d32066 md: be cautious about using ->curr_resync_completed for ->recovery_offset
f2076e7d0643 MD: set journal disk ->raid_disk
db721d32b74b md: level_store: group all important changes into one place.
2c810cddc44d md: allow a reshape operation to be reversed.
de171cb9a525 md: revert change to raid_disks on failure.
ba1b41b6b4e3 md: range check slot number when manually adding a spare.
3a3a5ddb7a0f Update recovery_offset even when external metadata is used.
70fffd0bfab1 md: Don't update ->recovery_offset when reshaping an array to fewer devices.
6177b472ab14 md: start to refactor do_md_stop
5e5e3e78ed90 md: Fix handling of raid5 array which is being reshaped to fewer devices.
]
|
| 434/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 34472
output: 36
thoughts: 55
Thoughts: Here's my thinking:
**Examining the Evolution of `delta_disks` in `drivers/md/md.c`**
Okay, I need to understand the history of `delta_disks` in the `drivers/md/md.c` file. Let's dig deeper than just the recent commits. I need to go *way* back to see the very first introduction of that variable and the context around it. I could use `grep` or `git log` to achieve this. Perhaps I can avoid overly broad searches with "since" limits or with `count` in the git log or refine by seeking the commit where `delta_disks` was originally *added*. That should give me the precise information I'm looking for. Let's see what that uncovers.
|
| 435/2 |
2026/09/09 21:22 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks Count:30 PathPrefix:drivers/md/]
Results: map[Output:1cbc6ea5fa65 md/md-llbitmap: grow the page cache in place for reshape
8e9171decb5e md/raid10: resize r10bio_pool for reshape
189f164e573e Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
69050f8d6d07 treewide: Replace kmalloc with kmalloc_obj for non-scalar types
6dd3aa08e83b md: factor out sync completion update into helper
cb0780ad4333 md: add helper rdev_needs_recovery()
d176fadb9e78 dm raid: fix stripes adding reshape size issues
d8730f0cf4ef md: Remove deprecated CONFIG_MD_MULTIPATH
f99a8e4373ee dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
04dc5330e5de dm raid: Remove empty if statement
7564beda19b3 md-cluster/raid10: support add disk under grow mode
6396bb221514 treewide: kzalloc() -> kcalloc()
8876391e440b md: fix a potential deadlock of raid5/raid10 reshape
11e472320668 dm raid: stop keeping raid set frozen altogether
61e06e2c3ebd dm raid: fix raid set size revalidation
db0505d32066 md: be cautious about using ->curr_resync_completed for ->recovery_offset
845b9e229fe0 raid5-ppl: use resize_stripes() when enabling or disabling ppl
4464e36e0647 dm raid: fix table line argument order in status
453c2a8967e5 dm raid: correct error messages on old metadata validation
7a7c330fc266 dm raid: support delta_disks for raid1, fix table output
469b304b58c4 dm raid: enhance reshape check and factor out reshape setup
9dbd1aa3a81c dm raid: add reshaping support to the target
40ba37e5647c dm raid: add prerequisite functions and definitions for reshaping
a30cbc0d1c80 dm raid: inverse check for flags from invalid to valid flags
4286325b4b0d dm raid: remove all the bitops wrappers
bd83a4c4f838 dm raid: remove ti_error_* wrappers
3a1c1ef2fd62 dm raid: enhance status interface and fixup takeover/raid0
ecbfb9f118bc dm raid: add raid level takeover support
7b34df74d27b dm raid: enhance super_sync() to support new superblock members
4763e543a679 dm raid: add new reshaping/raid10 format table line options to parameter parser
]
|
| 436/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 35463
output: 47
thoughts: 29
Thoughts: Here's a summary of my thought process, as if I were analyzing that code snippet:
**Diving into `drivers/md/md.c` - Pre-`5e5e3e78ed90`**
Alright, so I'm focusing on the `drivers/md/md.c` file and specifically, the state of the code *before* the commit `5e5e3e78ed90`. That commit hash is important; it tells me exactly where to anchor my understanding of the pre-change context. This is the starting point. I know I have to understand the code as it was *before* this specific commit, this ensures that I have the correct context for whatever analysis I am about to engage.
My immediate questions are going to be: What was the main function of this section of the code? What was it responsible for? What components did it touch? What are the key data structures and algorithms in play? What problem was the developer trying to solve? How might I have approached this problem differently? What was the general state of the code and the underlying assumptions being made? I need to get a feel for the architectural design choices the original authors were making. I need to be aware of what changes this commit made to the source and what the commit was intended to improve.
I'm thinking about the MD subsystem - likely related to RAID functionality. So, I'll need to remember the core concepts of RAID: redundancy, striping, block-level operations, handling device failures, and data reconstruction. I'll be looking for clues on how the code interacted with block devices, how it managed parity calculations (if it was RAID5 or RAID6), how it handled data distribution, and error recovery. `md.c` is a pretty core piece, so I expect a high level of sophistication in the code's design.
Essentially, I'm setting the stage. Knowing the state of the code before the change is critical for understanding the commit's intent and impact. Let's see what I find.
|
| 437/2 |
2026/09/09 21:22 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks Count:15 PathPrefix:drivers/md/md.c Since:16 years]
Results: map[Output:6dd3aa08e83b md: factor out sync completion update into helper
cb0780ad4333 md: add helper rdev_needs_recovery()
d8730f0cf4ef md: Remove deprecated CONFIG_MD_MULTIPATH
7564beda19b3 md-cluster/raid10: support add disk under grow mode
8876391e440b md: fix a potential deadlock of raid5/raid10 reshape
db0505d32066 md: be cautious about using ->curr_resync_completed for ->recovery_offset
f2076e7d0643 MD: set journal disk ->raid_disk
db721d32b74b md: level_store: group all important changes into one place.
2c810cddc44d md: allow a reshape operation to be reversed.
de171cb9a525 md: revert change to raid_disks on failure.
ba1b41b6b4e3 md: range check slot number when manually adding a spare.
]
|
| 438/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 36244
output: 26
thoughts: 23
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience and written in the first person:
**Initial Investigation Point**
Okay, before diving any deeper, I need to rewind and contextualize this. Let's start by examining the sequence that includes and precedes `5e5e3e78ed90`. I need to understand the preceding states and transitions to ensure I fully grasp the current state's implications. Jumping ahead without this context would be a classic rookie mistake. Understanding the lineage of this identifier, the related data and the historical changes, will give me the foundational context that I need.
|
| 439/2 |
2026/09/09 21:22 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 5e5e3e78ed9038b8f7112835d07084eefb9daa47
Author: NeilBrown <neil@brown.name>
Date: Fri Oct 16 16:35:30 2009 +1100
md: Fix handling of raid5 array which is being reshaped to fewer devices.
When a raid5 (or raid6) array is being reshaped to have fewer devices,
conf->raid_disks is the latter and hence smaller number of devices.
However sometimes we want to use a number which is the total number of
currently required devices - the larger of the 'old' and 'new' sizes.
Before we implemented reducing the number of devices, this was always
'new' i.e. ->raid_disks.
Now we need max(raid_disks, previous_raid_disks) in those places.
This particularly affects assembling an array that was shutdown while
in the middle of a reshape to fewer devices.
md.c needs a similar fix when interpreting the md metadata.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 26ba42a79129..10eb1fce975e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2631,7 +2631,7 @@ static void analyze_sbs(mddev_t * mddev)
rdev->desc_nr = i++;
rdev->raid_disk = rdev->desc_nr;
set_bit(In_sync, &rdev->flags);
- } else if (rdev->raid_disk >= mddev->raid_disks) {
+ } else if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks))) {
rdev->raid_disk = -1;
clear_bit(In_sync, &rdev->flags);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d4ce51b4d41b..c4366c9373c5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1238,22 +1238,22 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
static int grow_one_stripe(raid5_conf_t *conf)
{
struct stripe_head *sh;
+ int disks = max(conf->raid_disks, conf->previous_raid_disks);
sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
if (!sh)
return 0;
- memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
+ memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
sh->raid_conf = conf;
spin_lock_init(&sh->lock);
#ifdef CONFIG_MULTICORE_RAID456
init_waitqueue_head(&sh->ops.wait_for_ops);
#endif
- if (grow_buffers(sh, conf->raid_disks)) {
- shrink_buffers(sh, conf->raid_disks);
+ if (grow_buffers(sh, disks)) {
+ shrink_buffers(sh, disks);
kmem_cache_free(conf->slab_cache, sh);
return 0;
}
- sh->disks = conf->raid_disks;
/* we just created an active stripe so... */
atomic_set(&sh->count, 1);
atomic_inc(&conf->active_stripes);
@@ -1265,7 +1265,7 @@ static int grow_one_stripe(raid5_conf_t *conf)
static int grow_stripes(raid5_conf_t *conf, int num)
{
struct kmem_cache *sc;
- int devs = conf->raid_disks;
+ int devs = max(conf->raid_disks, conf->previous_raid_disks);
sprintf(conf->cache_name[0],
"raid%d-%s", conf->level, mdname(conf->mddev));
@@ -3540,9 +3540,10 @@ static void unplug_slaves(mddev_t *mddev)
{
raid5_conf_t *conf = mddev->private;
int i;
+ int devs = max(conf->raid_disks, conf->previous_raid_disks);
rcu_read_lock();
- for (i = 0; i < conf->raid_disks; i++) {
+ for (i = 0; i < devs; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
@@ -4562,13 +4563,9 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
if (!sectors)
sectors = mddev->dev_sectors;
- if (!raid_disks) {
+ if (!raid_disks)
/* size is defined by the smallest of previous and new size */
- if (conf->raid_disks < conf->previous_raid_disks)
- raid_disks = conf->raid_disks;
- else
- raid_disks = conf->previous_raid_disks;
- }
+ raid_disks = min(conf->raid_disks, conf->previous_raid_disks);
sectors &= ~((sector_t)mddev->chunk_sectors - 1);
sectors &= ~((sector_t)mddev->new_chunk_sectors - 1);
@@ -4669,7 +4666,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf)
}
per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
}
- scribble = kmalloc(scribble_len(conf->raid_disks), GFP_KERNEL);
+ scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
if (!scribble) {
err = -ENOMEM;
break;
@@ -4690,7 +4687,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf)
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
- int raid_disk, memory;
+ int raid_disk, memory, max_disks;
mdk_rdev_t *rdev;
struct disk_info *disk;
@@ -4740,13 +4737,14 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
conf->bypass_threshold = BYPASS_THRESHOLD;
conf->raid_disks = mddev->raid_disks;
- conf->scribble_len = scribble_len(conf->raid_disks);
if (mddev->reshape_position == MaxSector)
conf->previous_raid_disks = mddev->raid_disks;
else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
+ max_disks = max(conf->raid_disks, conf->previous_raid_disks);
+ conf->scribble_len = scribble_len(max_disks);
- conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
+ conf->disks = kzalloc(max_disks * sizeof(struct disk_info),
GFP_KERNEL);
if (!conf->disks)
goto abort;
@@ -4764,7 +4762,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
list_for_each_entry(rdev, &mddev->disks, same_set) {
raid_disk = rdev->raid_disk;
- if (raid_disk >= conf->raid_disks
+ if (raid_disk >= max_disks
|| raid_disk < 0)
continue;
disk = conf->disks + raid_disk;
@@ -4796,7 +4794,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
}
memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
if (grow_stripes(conf, conf->max_nr_stripes)) {
printk(KERN_ERR
"raid5: couldn't allocate %dkB for buffers\n", memory);
@@ -4921,7 +4919,8 @@ static int run(mddev_t *mddev)
test_bit(In_sync, &rdev->flags))
working_disks++;
- mddev->degraded = conf->raid_disks - working_disks;
+ mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
+ - working_disks);
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
]
|
| 440/2 |
2026/09/09 21:22 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 39060
output: 26
thoughts: 27
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Tracing the Genesis of `delta_disks`**
Okay, so I need to pinpoint the introduction of `delta_disks` into `struct mddev` (or potentially its older, pre-`s` variant). This is a pretty straightforward, though potentially time-consuming, task. My first instinct is to reach for `git blame`. I'll probably start with a `git grep` within the Linux kernel source tree, specifically targeting the relevant header files, to get a rough idea of where it first appears. That will narrow the range.
Once I have a probable commit, Iβll leverage `git blame` on that file to see the exact line(s) where it was added and the commit introducing it. I'm hoping it's a relatively recent addition and not something that's been in the codebase forever, or this could get tedious. The commit message itself will hopefully provide context about why this field was deemed necessary.
If the initial `git grep` is too broad, I might refine it by adding more specific search terms. Perhaps I'll look for related keywords or associated functionalities in the same header file. I can also try searching for usages of `delta_disks` in other parts of the code to get an idea of the surrounding logic, which can help me understand the purpose of this member and where to look.
Ultimately, I expect to quickly uncover the specific commit that introduced `delta_disks` and the rationale behind its inclusion. I'm aiming for a clear understanding of its origin and intended use.
|
| 441/2 |
2026/09/09 21:22 |
tool |
git-log |
10m
Error:
Args: map[CodeRegexp:delta_disks; Count:5]
Results:
|
| 442/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 39489
output: 42
thoughts: 31
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and presented as if it were my own internal monologue:
**Focusing the Scope: Header File Selection**
Alright, I need to pinpoint the relevant header files for this task. The core of my thinking revolves around narrowing down the search space for the pertinent definitions and structures. Given the context, I'm leaning toward either specifying `PathPrefix: "include/linux/raid/md_k.h"` or `drivers/md/md.h`. The former suggests a deeper dive into the kernel's RAID implementation, likely focusing on internal kernel structures and functions. `drivers/md/md.h` offers a broader perspective, more likely containing user-facing or driver-level definitions. This requires a bit of foresightβselecting the right one early on to refine the scope. Let's see which option yields what I need.
|
| 443/2 |
2026/09/09 21:33 |
tool |
git-log |
0m
Args: map[CodeRegexp:delta_disks Count:5 PathPrefix:include/linux/raid/md_k.h]
Results: map[Output:43b2e5d86d8b md: move md_k.h from include/linux/raid/ to drivers/md/
f67055780caa [PATCH] md: Checkpoint and allow restart of raid5 reshape
]
|
| 444/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 39824
output: 28
thoughts: 90
Thoughts: Here's my thinking process:
**Diving into the Code: Understanding Array Inactivation**
Okay, so I'm looking at this commit ID, `f67055780caa`, which, according to the metadata, dates back to 2006. My focus right now is how arrays are handled, specifically the difference in behavior when they're stopped, using either mode 2 (inactive) or the default mode 0. I need to understand the nuances of this difference, as it's critical for [*insert specific area of expertise - e.g., disaster recovery, RAID management, etc.*].
To get the lowdown, I'm heading directly to the source code: `drivers/md/md.c`. This is where the core of the RAID functionality resides, and `array_state_store` seems like the perfect function to start with. I'm going to search for the keyword "inactive" within that function. That should pinpoint exactly how the system reacts to arrays marked with that specific state, and how it differs from mode 0 behavior. This will provide the concrete code-level details I need to analyze the implications for [*specific system or application*].
|
| 445/2 |
2026/09/09 21:33 |
tool |
grepper |
0m
Args: map[Expression:inactive PathPrefix:drivers/md/md.c]
Results: map[Output:drivers/md/md.c=4554=__ATTR_PREALLOC(resync_start, S_IRUGO|S_IWUSR,
--
drivers/md/md.c-4562- * Equivalent to STOP_ARRAY ioctl
drivers/md/md.c:4563: * inactive
drivers/md/md.c-4564- * May have some settings, but array is not active
--
drivers/md/md.c-4576- * clean - no pending writes, but otherwise active.
drivers/md/md.c:4577: * When written to inactive array, starts without resync
drivers/md/md.c-4578- * If a write request arrives then
--
drivers/md/md.c-4583- * fully active: IO and resync can be happening.
drivers/md/md.c:4584: * When written to inactive array, starts with resync
drivers/md/md.c-4585- *
--
drivers/md/md.c-4596- */
drivers/md/md.c:4597:enum array_state { clear, inactive, suspended, readonly, read_auto, clean, active,
drivers/md/md.c-4598- write_pending, active_idle, broken, bad_word};
drivers/md/md.c=4599=static char *array_states[] = {
drivers/md/md.c:4600: "clear", "inactive", "suspended", "readonly", "read-auto", "clean", "active",
drivers/md/md.c-4601- "write-pending", "active-idle", "broken", NULL };
--
drivers/md/md.c=4613=array_state_show(struct mddev *mddev, char *page)
drivers/md/md.c-4614-{
drivers/md/md.c:4615: enum array_state st = inactive;
drivers/md/md.c-4616-
--
drivers/md/md.c-4645- else
drivers/md/md.c:4646: st = inactive;
drivers/md/md.c-4647- }
--
drivers/md/md.c=4656=array_state_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4670- case readonly:
drivers/md/md.c:4671: case inactive:
drivers/md/md.c-4672- case read_auto:
--
drivers/md/md.c-4709- switch (st) {
drivers/md/md.c:4710: case inactive:
drivers/md/md.c-4711- /* stop an active array, return 0 otherwise */
--
drivers/md/md.c-4779-
drivers/md/md.c:4780: if (st == readonly || st == read_auto || st == inactive ||
drivers/md/md.c-4781- (err && st == clear))
--
drivers/md/md.c=4941=size_store(struct mddev *mddev, const char *buf, size_t len)
drivers/md/md.c-4942-{
drivers/md/md.c:4943: /* If array is inactive, we can reduce the component size, but
drivers/md/md.c-4944- * not increase it (except from 0).
--
drivers/md/md.c=7162=static int do_md_stop(struct mddev *mddev, int mode)
--
drivers/md/md.c-7194-
drivers/md/md.c:7195: /* tell userspace to handle 'inactive' */
drivers/md/md.c-7196- sysfs_notify_dirent_safe(mddev->sysfs_state);
--
drivers/md/md.c=9030=static int md_seq_show(struct seq_file *seq, void *v)
--
drivers/md/md.c-9065- } else {
drivers/md/md.c:9066: seq_printf(seq, "inactive");
drivers/md/md.c-9067- }
]
|
| 446/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 41306
output: 36
thoughts: 29
Thoughts: Here's my summary, as though I'm reading and processing the provided information:
**Analyzing `array_state_store` in `drivers/md/md.c`**
Okay, let's dive into the `array_state_store` function within `drivers/md/md.c`, specifically around line 4710. My initial thought is to understand how this function is handling the persistence of the RAID array state. Given the naming, "state_store," and the file location within the MD (Multiple Device) driver, I'm expecting this to be a critical part of ensuring that array metadata survives reboots and system failures. I need to figure out what data is being persisted and how the writes are synchronized. Is it using a simple file-based approach, a dedicated metadata area on the devices themselves, or something more complex? The goal here is to determine the robustness of the state management and identify potential bottlenecks or areas for improvement in our understanding of the driver. Let's see how it achieves consistency...
|
| 447/2 |
2026/09/09 21:33 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:4705 LineCount:40]
Results: map[Contents:4705: err = mddev_lock(mddev);
4706: if (err)
4707: return err;
4708:
4709: switch (st) {
4710: case inactive:
4711: /* stop an active array, return 0 otherwise */
4712: if (mddev->pers)
4713: err = do_md_stop(mddev, 2);
4714: break;
4715: case clear:
4716: err = do_md_stop(mddev, 0);
4717: break;
4718: case readonly:
4719: if (mddev->pers)
4720: err = md_set_readonly(mddev);
4721: else {
4722: mddev->ro = MD_RDONLY;
4723: set_disk_ro(mddev->gendisk, 1);
4724: err = do_md_run(mddev);
4725: }
4726: break;
4727: case read_auto:
4728: if (mddev->pers) {
4729: if (md_is_rdwr(mddev))
4730: err = md_set_readonly(mddev);
4731: else if (mddev->ro == MD_RDONLY)
4732: err = restart_array(mddev);
4733: if (err == 0) {
4734: mddev->ro = MD_AUTO_READ;
4735: set_disk_ro(mddev->gendisk, 0);
4736: }
4737: } else {
4738: mddev->ro = MD_AUTO_READ;
4739: err = do_md_run(mddev);
4740: }
4741: break;
4742: case clean:
4743: if (mddev->pers) {
4744: err = restart_array(mddev);
]
|
| 448/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 42161
output: 37
thoughts: 52
Thoughts: **Analyzing the Stop Process**
Okay, so I see this `inactive` process is calling `do_md_stop` with an argument of 2. Right, that's interesting. I need to understand the implications of this action. Specifically, I need to know the history of this interaction, when was this logic introduced into `array_state_store`? Let's use `git blame` to pinpoint the exact commit responsible for lines 4710 through 4715. That will give me the context I need β who added it, why they did it, and what other changes were made at the same time. This will help me understand the full scope of this function call.
|
| 449/2 |
2026/09/09 21:33 |
tool |
git-blame |
0m
Args: map[End:4716 File:drivers/md/md.c Start:4708]
Results: map[Output:09f894affcf2d 4708)
09f894affcf2d 4709) switch (st) {
9e653b6342c94 4710) case inactive:
09f894affcf2d 4711) /* stop an active array, return 0 otherwise */
90cf195d9bcb4 4712) if (mddev->pers)
650b2e69ff6ab 4713) err = do_md_stop(mddev, 2);
9e653b6342c94 4714) break;
09f894affcf2d 4715) case clear:
650b2e69ff6ab 4716) err = do_md_stop(mddev, 0);
]
|
| 450/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 42648
output: 40
thoughts: 1869
Thoughts: **Analyzing RAID5 Reshape Code and Bug Introduction**
Okay, so it looks like `650b2e69ff6ab` removed an argument from `do_md_stop`, which makes me want to dig into that function's dependencies. First thought: let's go check out `9e653b6342c94`, which is "[PATCH] md: Set/get state of array via sysfs" from back in 2006. That's not immediately relevant, but good to know. Now, let's see why I'm looking at this; where was I? Right, `BUG_ON(mddev->delta_disks != 0)` in `raid5_run()`.
The immediate next thought is to identify when that `BUG_ON` was added. A quick look shows `91adb56473feb` ("md/raid5: refactor raid5 \"run\"") on March 31, 2009. Did *that* commit add the `BUG_ON`? Let's confirm. Yes, it did. Specifically, the commit introduces that `BUG_ON` block:
```c
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
```
Wait, was `raid5_run` called `run` in `91adb56473feb`? Ah, yes, it was:
```c
static int run(mddev_t *mddev)
{
...
}
```
Now, what did `run` look like *before* `91adb56473feb`? I need to understand the change. Going back and looking at the diffs for that commit shows that before the conditional `BUG_ON` block, the code checked for reshape positions, and handled the data structure setup. Let's see what the code looked like prior to the refactor in `91adb56473feb`. I see no `else` branch *at all*. Before the `if (mddev->reshape_position != MaxSector)`, the original `run` would initialize `mddev->private` and set up the RAID configuration:
```c
mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
if ((conf = mddev->private) == NULL)
goto abort;
if (mddev->reshape_position == MaxSector) {
conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
} else {
conf->raid_disks = mddev->raid_disks;
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
}
...
conf->chunk_size = mddev->chunk_size;
conf->level = mddev->level;
...
conf->algorithm = mddev->layout;
```
It's clear: there was *no* `BUG_ON` before. I see a connection here! It's evident the `91adb56473feb` commit is key, because it changed the way the private data structures were initialized, and added the conditional logic and the `BUG_ON` statements. That's when the introduction happened.
So, *why* was the `BUG_ON` added? The commit message helps. "This will help with future code to change the level of an active array." Ah, okay, so this refactoring paved the way for online level changes. The `setup_conf` function uses `new_chunk`, `new_level`, and `new_layout`:
```c
conf->chunk_size = mddev->new_chunk;
conf->level = mddev->new_level;
...
conf->algorithm = mddev->new_layout;
```
The `run` function then contains the conditionals using the same `new_*` members.
```c
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON
|
| 451/2 |
2026/09/09 21:33 |
tool |
git-log |
0m
Error:
Args: map[Count:10 PathPrefix:drivers/md/ Since:2009-03-30]
Results:
|
| 452/2 |
2026/09/09 21:33 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 45615
output: 26
thoughts: 99
Thoughts: **Investigating the Commit History**
Okay, so I need to dig into the commit history. My initial thought is to use `git-show` or `git-log` to examine commits within a specific range, something like `91adb56473feb~5..91adb56473feb+5`. But I need to double-check: Does `git-log` support that kind of commit range directly? Or will I need to be more precise, perhaps specifying a date range related to changes in `drivers/md/raid5.c` around that commit ID?
Before I go further, let's just make a quick check of the parent commit of `91adb56473feb` using `git-show`. This may give me some key context right away and allow me to determine which approach will work best.
|
| 453/2 |
2026/09/09 21:33 |
tool |
git-show |
0m
Args: map[Commit:91adb56473feb~1]
Results: map[Output:commit 34817e8c3948ea20316dfa8fd8947d6d0ee82ba9
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:38 2009 +1100
md: make sure new_level, new_chunksize, new_layout always have sensible values.
When an md array is undergoing a change, we have new_* fields that
show the new values.
When no change is happening, it is least confusing if these have
the same value as the normal fields.
This is true in most cases, but not when the values are set via sysfs.
So fix this up.
A subsequent patch will BUG_ON if these things aren't consistent.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 07ab6790e29d..117ea5fde568 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2633,9 +2633,9 @@ layout_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- if (mddev->reshape_position != MaxSector)
- mddev->new_layout = n;
- else
+
+ mddev->new_layout = n;
+ if (mddev->reshape_position == MaxSector)
mddev->layout = n;
return len;
}
@@ -2702,9 +2702,9 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- else if (mddev->reshape_position != MaxSector)
- mddev->new_chunk = n;
- else
+
+ mddev->new_chunk = n;
+ if (mddev->reshape_position == MaxSector)
mddev->chunk_size = n;
return len;
}
@@ -3831,7 +3831,10 @@ static int do_md_run(mddev_t * mddev)
}
mddev->pers = pers;
spin_unlock(&pers_lock);
- mddev->level = pers->level;
+ if (mddev->level != pers->level) {
+ mddev->level = pers->level;
+ mddev->new_level = pers->level;
+ }
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (pers->level >= 4 && pers->level <= 6)
]
|
| 454/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 46681
output: 26
thoughts: 284
Thoughts: **Analyzing a Critical Fix in the MD Layer**
Okay, so I'm diving into this `md` array code and something just caught my eye: `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`. Let me zoom in on that commit title and message β "md: make sure new_level, new_chunksize, new_layout always have sensible values." Right, it's about handling changes in the `md` array, specifically ensuring the "new\_*" fields are consistent with the regular fields when no actual change is happening, especially when these values are set via sysfs. I can already see the potential for subtle bugs here, especially during configuration.
The author, NeilBrown, mentions a subsequent patch that'll `BUG_ON` if things aren't consistent, which is exactly what I'd expect to see here. Let's see... the *very* next commit is `91adb56473feb`, which is the one! ("A subsequent patch will BUG_ON if these things aren't consistent.")
Hold on a sec, I want to see the *broader* context around this critical fix. Let's trace it through a larger commit series to understand the surrounding work better. I'll pull up the log with `git log 91adb56473feb~5..91adb56473feb+10` to get a good window. This helps me verify the fix and look for possible ripple effects.
|
| 455/2 |
2026/09/09 21:34 |
tool |
git-show |
0m
Args: map[Commit:91adb56473feb~2]
Results: map[Output:commit 67cc2b8165857ba019920d1f00d64bcc4140075d
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:38 2009 +1100
md/raid5: finish support for DDF/raid6
DDF requires RAID6 calculations over different devices in a different
order.
For md/raid6, we calculate over just the data devices, starting
immediately after the 'Q' block.
For ddf/raid6 we calculate over all devices, using zeros in place of
the P and Q blocks.
This requires unfortunately complex loops...
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c1d94ed9718b..edbc80c4d346 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -136,6 +136,10 @@ static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
/* Find first data disk in a raid6 stripe */
static inline int raid6_d0(struct stripe_head *sh)
{
+ if (sh->ddf_layout)
+ /* ddf always start from first device */
+ return 0;
+ /* md starts just after Q block */
if (sh->qd_idx == sh->disks - 1)
return 0;
else
@@ -152,13 +156,15 @@ static inline int raid6_next_disk(int disk, int raid_disks)
* 0 .. raid_disks-3, the parity disk is raid_disks-2 and the Q disk
* is raid_disks-1. This help does that mapping.
*/
-static int raid6_idx_to_slot(int idx, struct stripe_head *sh, int *count)
+static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
+ int *count, int syndrome_disks)
{
int slot;
+
if (idx == sh->pd_idx)
- return sh->disks - 2;
+ return syndrome_disks;
if (idx == sh->qd_idx)
- return sh->disks - 1;
+ return syndrome_disks + 1;
slot = (*count)++;
return slot;
}
@@ -1267,6 +1273,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
unsigned long chunk_number;
unsigned int chunk_offset;
int pd_idx, qd_idx;
+ int ddf_layout = 0;
sector_t new_sector;
int sectors_per_chunk = conf->chunk_size >> 9;
int raid_disks = previous ? conf->previous_raid_disks
@@ -1386,6 +1393,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
qd_idx = 0;
} else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
break;
case ALGORITHM_ROTATING_N_RESTART:
@@ -1400,6 +1408,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
qd_idx = 0;
} else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
break;
case ALGORITHM_ROTATING_N_CONTINUE:
@@ -1407,6 +1416,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
pd_idx = raid_disks - 1 - (stripe % raid_disks);
qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
+ ddf_layout = 1;
break;
case ALGORITHM_LEFT_ASYMMETRIC_6:
@@ -1454,6 +1464,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
if (sh) {
sh->pd_idx = pd_idx;
sh->qd_idx = qd_idx;
+ sh->ddf_layout = ddf_layout;
}
/*
* Finally, compute the new sector number
@@ -1642,9 +1653,10 @@ static void compute_parity6(struct stripe_head *sh, int method)
{
raid5_conf_t *conf = sh->raid_conf;
int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count;
+ int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
struct bio *chosen;
/**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ void *ptrs[syndrome_disks+2];
pd_idx = sh->pd_idx;
qd_idx = sh->qd_idx;
@@ -1687,23 +1699,28 @@ static void compute_parity6(struct stripe_head *sh, int method)
}
/* Note that unlike RAID-5, the ordering of the disks matters greatly.*/
- /* FIX: Is this ordering of drives even remotely optimal? */
+
+ for (i = 0; i < disks; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
+
count = 0;
i = d0_idx;
do {
- int slot = raid6_idx_to_slot(i, sh, &count);
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
ptrs[slot] = page_address(sh->dev[i].page);
- if (slot < sh->disks - 2 &&
+ if (slot < syndrome_disks &&
!test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
printk(KERN_ERR "block %d/%d not uptodate "
"on parity calc\n", i, count);
BUG();
}
+
i = raid6_next_disk(i, disks);
} while (i != d0_idx);
- BUG_ON(count+2 != disks);
+ BUG_ON(count != syndrome_disks);
- raid6_call.gen_syndrome(disks, STRIPE_SIZE, ptrs);
+ raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs);
switch(method) {
case RECONSTRUCT_WRITE:
@@ -1761,24 +1778,28 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
{
int i, count, disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : disks-2;
int d0_idx = raid6_d0(sh);
int faila = -1, failb = -1;
/**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ void *ptrs[syndrome_disks+2];
+ for (i = 0; i < disks ; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
count = 0;
i = d0_idx;
do {
- int slot;
- slot = raid6_idx_to_slot(i, sh, &count);
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
ptrs[slot] = page_address(sh->dev[i].page);
+
if (i == dd_idx1)
faila = slot;
if (i == dd_idx2)
failb = slot;
i = raid6_next_disk(i, disks);
} while (i != d0_idx);
- BUG_ON(count+2 != disks);
+ BUG_ON(count != syndrome_disks);
BUG_ON(faila == failb);
if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
@@ -1787,9 +1808,9 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
(unsigned long long)sh->sector, dd_idx1, dd_idx2,
faila, failb);
- if ( failb == disks-1 ) {
+ if (failb == syndrome_disks+1) {
/* Q disk is one of the missing disks */
- if ( faila == disks-2 ) {
+ if (faila == syndrome_disks) {
/* Missing P+Q, just recompute */
compute_parity6(sh, UPDATE_PARITY);
return;
@@ -1804,12 +1825,13 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
}
/* We're missing D+P or D+D; */
- if (failb == disks-2) {
+ if (failb == syndrome_disks) {
/* We're missing D+P. */
- raid6_datap_recov(disks, STRIPE_SIZE, faila, ptrs);
+ raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs);
} else {
/* We're missing D+D. */
- raid6_2data_recov(disks, STRIPE_SIZE, faila, failb, ptrs);
+ raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb,
+ ptrs);
}
/* Both the above update both missing blocks */
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 633d79289616..84456b1af204 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -201,6 +201,7 @@ struct stripe_head {
sector_t sector; /* sector of this row */
short pd_idx; /* parity disk index */
short qd_idx; /* 'Q' disk index for raid6 */
+ short ddf_layout;/* use DDF ordering to calculate Q */
unsigned long state; /* state flags */
atomic_t count; /* nr of active thread/requests */
spinlock_t lock;
]
|
| 456/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 50427
output: 27
thoughts: 21
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing Commit Lineage**
Okay, so I need to understand the evolution from commit `91adb56473feb`. My first thought is, "What's the immediate *parent*? What changes were introduced directly preceding this specific snapshot of the codebase?". I'm going to look at the subsequent commit β the one that *directly* builds upon this one, the next step in the history. I'm implicitly seeking context; what features, bug fixes, or refactors were *added* following `91adb56473feb`? Was it a large refactor or a small change?
My mental checklist is running through the potential implications: Are we looking at a bug fix, a new feature implementation, or a merge? Was this part of a larger, branching development effort? I can quickly assess the change type by looking at the specific lines touched within the next commit, and its commit message, and then I can quickly correlate that to my existing mental model of this project. Ultimately, I'm trying to piece together the narrative thread of the codebase's history. This is the first step in constructing a mental map of what this commit did and why.
|
| 457/2 |
2026/09/09 21:34 |
tool |
git-show |
0m
Error:
Args: map[Commit:91adb56473feb~-1]
Results:
|
| 458/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 50780
output: 37
thoughts: 139
Thoughts: **My Git Workflow: A Refinement**
Okay, so I'm tackling this Git task, and I need to zero in on a specific commit. The old assumption that a child is ~-1 is clearly wrong, so I've got to find a better approach. Time to use `git log`. Now, what are my options to pinpoint it? `Since`, `CodeRegexp`, or even `git-log --ancestry-path` might be the ticket. Let's list the available options for git-log: CodeRegexp, Count, MessageRegexps, PathPrefix, Since, SourcePath, SymbolName.
Right, I need to filter by Neil Brown's commits, looking for messages mentioning "raid5", and ideally, I only need a few, say the top 10 around a certain timeframe. I remember `MessageRegexps` for filtering messages, and `Count` would be useful to narrow the results down. The timeframe, let's say around 16 years ago, and I need a date... Since only takes duration strings like "16 years." I might need to refine this based on the results.
Let's test `Since: "16 years"` with the `PathPrefix: "drivers/md/raid5.c"` - the file that should be relevant. Hopefully, this initial search will give me a manageable set of commits to inspect. Let's see what happens.
|
| 459/2 |
2026/09/09 21:34 |
tool |
git-log |
0m
Args: map[Count:20 PathPrefix:drivers/md/raid5.c Since:16 years]
Results: map[Output:661102bb87e4 md/raid5: split reshape bios before bitmap accounting
816b25aca5b3 md/raid5: wire llbitmap reshape lifecycle
05a1b89689df md/raid5: reject llbitmap reshape when md chunk shrinks
9f59258d3004 md/raid5: add exact old and new llbitmap mapping helpers
17ea021ae749 md/raid5: round bitmap stripes with sector division
a41bb2ee1aca md/raid5: reject zero-sector reshape chunks
bace2010dd7a md: scope memalloc_noio to allocation critical sections
85764f475f3b md/raid5: complete discard bios while reshape is active
3fe5b7c9fb72 md: remove REQ_NOWAIT support from raid1/10/456
a47431dfb353 md/raid5: protect lockless recovery_offset accesses during reshape
788e4139463f md/raid5: fix reshape deadlock while failed devices more than max degraded
6cb6ab75bdf2 md/raid5: fix lockless max_nr_stripes reads
f565925810cb md/raid5: protect bitmap batch counters aka seq_flush/seq_write consistency
55b77337bdd0 md/raid5: avoid R5_Overlap races while breaking stripe batches
9b249f5ffbed md/raid5: use stripe state snapshot in break_stripe_batch_list()
00e93faf4cea md/raid5: let stripe batch bm_seq comparison wrap-safe
53528031e7a6 md/raid5: always convert llbitmap bits for discard
90573092673c md/raid5: validate discard support at request time
74ddbf98e2db md/raid5: account discard IO
1d24d4c1ea1d dm-raid: only requeue bios when dm is suspending
]
|
| 460/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 51765
output: 39
thoughts: 105
Thoughts: **A Quick Dive into RAID5 History**
Okay, so I'm trying to pin down a specific code change, and the timeline is a bit fuzzy in my head. Let's see... 16 years ago from 2025 is 2009, 17 years ago is 2008. Need to confirm that.
Alright, a quick sanity check is in order. Time for some `git-log` diving. My gut tells me this change involved a function rename. I need to track the history of a symbol related to `run` within the `drivers/md/raid5.c` file. Specifically, I'm trying to ascertain when the name `run` became `raid5_run` or similar. I'll need to check the exact `git-log` output to confirm. Let's check when `run` became `raid5_run`.
|
| 461/2 |
2026/09/09 21:34 |
tool |
git-log |
0m
Args: map[CodeRegexp:raid5_run Count:5 PathPrefix:drivers/md/raid5.c]
Results: map[Output:4631f39f058b md/raid5: Annotate functions that hold device_lock with __must_hold
849674e4fb17 MD: rename some functions
ac6b53b6e6ac md/raid6: asynchronous raid6 operations
600aa1099301 md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states'
ecc65c9b3f9b md: replace STRIPE_OP_CHECK with 'check_states'
]
|
| 462/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 52248
output: 26
thoughts: 44
Thoughts: Here's my summary, as the expert:
**Analyzing that Commit Hash**
Okay, so I've got this commit hash: `849674e4fb17`. That's the key to understanding the change log. The description, "MD: rename some functions," immediately tells me the scope. This isn't a massive overhaul; it's a focused refactoring, likely related to improving code readability or perhaps adhering to a new style guide. The "MD" prefix *could* refer to Markdown, but given the nature of commits, I suspect it relates to Model/Methods or some other system naming. I'll need to dig into the diff to see which functions were renamed and understand the context. This is the starting point to evaluating the change and its implications for the project. Let's get to the code.
|
| 463/2 |
2026/09/09 21:34 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 849674e4fb175e47b7504249f7367367b18fe6a1
Author: Shaohua Li <shli@fb.com>
Date: Wed Jan 20 13:52:20 2016 -0800
MD: rename some functions
These short function names are hard to search. Rename them to make vim happy.
Signed-off-by: Shaohua Li <shli@fb.com>
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 4a8e15058e8b..685aa2d77e25 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -170,7 +170,7 @@ static void add_sector(struct faulty_conf *conf, sector_t start, int mode)
conf->nfaults = n+1;
}
-static void make_request(struct mddev *mddev, struct bio *bio)
+static void faulty_make_request(struct mddev *mddev, struct bio *bio)
{
struct faulty_conf *conf = mddev->private;
int failit = 0;
@@ -226,7 +226,7 @@ static void make_request(struct mddev *mddev, struct bio *bio)
generic_make_request(bio);
}
-static void status(struct seq_file *seq, struct mddev *mddev)
+static void faulty_status(struct seq_file *seq, struct mddev *mddev)
{
struct faulty_conf *conf = mddev->private;
int n;
@@ -259,7 +259,7 @@ static void status(struct seq_file *seq, struct mddev *mddev)
}
-static int reshape(struct mddev *mddev)
+static int faulty_reshape(struct mddev *mddev)
{
int mode = mddev->new_layout & ModeMask;
int count = mddev->new_layout >> ModeShift;
@@ -299,7 +299,7 @@ static sector_t faulty_size(struct mddev *mddev, sector_t sectors, int raid_disk
return sectors;
}
-static int run(struct mddev *mddev)
+static int faulty_run(struct mddev *mddev)
{
struct md_rdev *rdev;
int i;
@@ -327,7 +327,7 @@ static int run(struct mddev *mddev)
md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
mddev->private = conf;
- reshape(mddev);
+ faulty_reshape(mddev);
return 0;
}
@@ -344,11 +344,11 @@ static struct md_personality faulty_personality =
.name = "faulty",
.level = LEVEL_FAULTY,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = faulty_make_request,
+ .run = faulty_run,
.free = faulty_free,
- .status = status,
- .check_reshape = reshape,
+ .status = faulty_status,
+ .check_reshape = faulty_reshape,
.size = faulty_size,
};
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c4b913409226..4e3843f7d245 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1044,7 +1044,7 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule)
kfree(plug);
}
-static void make_request(struct mddev *mddev, struct bio * bio)
+static void raid1_make_request(struct mddev *mddev, struct bio * bio)
{
struct r1conf *conf = mddev->private;
struct raid1_info *mirror;
@@ -1422,7 +1422,7 @@ static void make_request(struct mddev *mddev, struct bio * bio)
wake_up(&conf->wait_barrier);
}
-static void status(struct seq_file *seq, struct mddev *mddev)
+static void raid1_status(struct seq_file *seq, struct mddev *mddev)
{
struct r1conf *conf = mddev->private;
int i;
@@ -1439,7 +1439,7 @@ static void status(struct seq_file *seq, struct mddev *mddev)
seq_printf(seq, "]");
}
-static void error(struct mddev *mddev, struct md_rdev *rdev)
+static void raid1_error(struct mddev *mddev, struct md_rdev *rdev)
{
char b[BDEVNAME_SIZE];
struct r1conf *conf = mddev->private;
@@ -2472,7 +2472,8 @@ static int init_resync(struct r1conf *conf)
* that can be installed to exclude normal IO requests.
*/
-static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
+static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr,
+ int *skipped)
{
struct r1conf *conf = mddev->private;
struct r1bio *r1_bio;
@@ -2890,7 +2891,7 @@ static struct r1conf *setup_conf(struct mddev *mddev)
}
static void raid1_free(struct mddev *mddev, void *priv);
-static int run(struct mddev *mddev)
+static int raid1_run(struct mddev *mddev)
{
struct r1conf *conf;
int i;
@@ -3170,15 +3171,15 @@ static struct md_personality raid1_personality =
.name = "raid1",
.level = 1,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = raid1_make_request,
+ .run = raid1_run,
.free = raid1_free,
- .status = status,
- .error_handler = error,
+ .status = raid1_status,
+ .error_handler = raid1_error,
.hot_add_disk = raid1_add_disk,
.hot_remove_disk= raid1_remove_disk,
.spare_active = raid1_spare_active,
- .sync_request = sync_request,
+ .sync_request = raid1_sync_request,
.resize = raid1_resize,
.size = raid1_size,
.check_reshape = raid1_reshape,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ce959b4ae4df..1c1447dd3417 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1442,7 +1442,7 @@ static void __make_request(struct mddev *mddev, struct bio *bio)
one_write_done(r10_bio);
}
-static void make_request(struct mddev *mddev, struct bio *bio)
+static void raid10_make_request(struct mddev *mddev, struct bio *bio)
{
struct r10conf *conf = mddev->private;
sector_t chunk_mask = (conf->geo.chunk_mask & conf->prev.chunk_mask);
@@ -1484,7 +1484,7 @@ static void make_request(struct mddev *mddev, struct bio *bio)
wake_up(&conf->wait_barrier);
}
-static void status(struct seq_file *seq, struct mddev *mddev)
+static void raid10_status(struct seq_file *seq, struct mddev *mddev)
{
struct r10conf *conf = mddev->private;
int i;
@@ -1562,7 +1562,7 @@ static int enough(struct r10conf *conf, int ignore)
_enough(conf, 1, ignore);
}
-static void error(struct mddev *mddev, struct md_rdev *rdev)
+static void raid10_error(struct mddev *mddev, struct md_rdev *rdev)
{
char b[BDEVNAME_SIZE];
struct r10conf *conf = mddev->private;
@@ -2802,7 +2802,7 @@ static int init_resync(struct r10conf *conf)
*
*/
-static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
+static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
int *skipped)
{
struct r10conf *conf = mddev->private;
@@ -3523,7 +3523,7 @@ static struct r10conf *setup_conf(struct mddev *mddev)
return ERR_PTR(err);
}
-static int run(struct mddev *mddev)
+static int raid10_run(struct mddev *mddev)
{
struct r10conf *conf;
int i, disk_idx, chunk_size;
@@ -4617,15 +4617,15 @@ static struct md_personality raid10_personality =
.name = "raid10",
.level = 10,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = raid10_make_request,
+ .run = raid10_run,
.free = raid10_free,
- .status = status,
- .error_handler = error,
+ .status = raid10_status,
+ .error_handler = raid10_error,
.hot_add_disk = raid10_add_disk,
.hot_remove_disk= raid10_remove_disk,
.spare_active = raid10_spare_active,
- .sync_request = sync_request,
+ .sync_request = raid10_sync_request,
.quiesce = raid10_quiesce,
.size = raid10_size,
.resize = raid10_resize,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a086014dcd49..b4f02c9959f2 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2496,7 +2496,7 @@ static void raid5_build_block(struct stripe_head *sh, int i, int previous)
dev->sector = raid5_compute_blocknr(sh, i, previous);
}
-static void error(struct mddev *mddev, struct md_rdev *rdev)
+static void raid5_error(struct mddev *mddev, struct md_rdev *rdev)
{
char b[BDEVNAME_SIZE];
struct r5conf *conf = mddev->private;
@@ -2958,7 +2958,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx,
* If several bio share a stripe. The bio bi_phys_segments acts as a
* reference count to avoid race. The reference count should already be
* increased before this function is called (for example, in
- * make_request()), so other bio sharing this stripe will not free the
+ * raid5_make_request()), so other bio sharing this stripe will not free the
* stripe. If a stripe is owned by one stripe, the stripe lock will
* protect it.
*/
@@ -5135,7 +5135,7 @@ static void make_discard_request(struct mddev *mddev, struct bio *bi)
}
}
-static void make_request(struct mddev *mddev, struct bio * bi)
+static void raid5_make_request(struct mddev *mddev, struct bio * bi)
{
struct r5conf *conf = mddev->private;
int dd_idx;
@@ -5225,7 +5225,7 @@ static void make_request(struct mddev *mddev, struct bio * bi)
new_sector = raid5_compute_sector(conf, logical_sector,
previous,
&dd_idx, NULL);
- pr_debug("raid456: make_request, sector %llu logical %llu\n",
+ pr_debug("raid456: raid5_make_request, sector %llu logical %llu\n",
(unsigned long long)new_sector,
(unsigned long long)logical_sector);
@@ -5575,7 +5575,8 @@ static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *sk
return retn;
}
-static inline sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
+static inline sector_t raid5_sync_request(struct mddev *mddev, sector_t sector_nr,
+ int *skipped)
{
struct r5conf *conf = mddev->private;
struct stripe_head *sh;
@@ -6674,7 +6675,7 @@ static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded
return 0;
}
-static int run(struct mddev *mddev)
+static int raid5_run(struct mddev *mddev)
{
struct r5conf *conf;
int working_disks = 0;
@@ -7048,7 +7049,7 @@ static void raid5_free(struct mddev *mddev, void *priv)
mddev->to_remove = &raid5_attrs_group;
}
-static void status(struct seq_file *seq, struct mddev *mddev)
+static void raid5_status(struct seq_file *seq, struct mddev *mddev)
{
struct r5conf *conf = mddev->private;
int i;
@@ -7864,15 +7865,15 @@ static struct md_personality raid6_personality =
.name = "raid6",
.level = 6,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = raid5_make_request,
+ .run = raid5_run,
.free = raid5_free,
- .status = status,
- .error_handler = error,
+ .status = raid5_status,
+ .error_handler = raid5_error,
.hot_add_disk = raid5_add_disk,
.hot_remove_disk= raid5_remove_disk,
.spare_active = raid5_spare_active,
- .sync_request = sync_request,
+ .sync_request = raid5_sync_request,
.resize = raid5_resize,
.size = raid5_size,
.check_reshape = raid6_check_reshape,
@@ -7887,15 +7888,15 @@ static struct md_personality raid5_personality =
.name = "raid5",
.level = 5,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = raid5_make_request,
+ .run = raid5_run,
.free = raid5_free,
- .status = status,
- .error_handler = error,
+ .status = raid5_status,
+ .error_handler = raid5_error,
.hot_add_disk = raid5_add_disk,
.hot_remove_disk= raid5_remove_disk,
.spare_active = raid5_spare_active,
- .sync_request = sync_request,
+ .sync_request = raid5_sync_request,
.resize = raid5_resize,
.size = raid5_size,
.check_reshape = raid5_check_reshape,
@@ -7911,15 +7912,15 @@ static struct md_personality raid4_personality =
.name = "raid4",
.level = 4,
.owner = THIS_MODULE,
- .make_request = make_request,
- .run = run,
+ .make_request = raid5_make_request,
+ .run = raid5_run,
.free = raid5_free,
- .status = status,
- .error_handler = error,
+ .status = raid5_status,
+ .error_handler = raid5_error,
.hot_add_disk = raid5_add_disk,
.hot_remove_disk= raid5_remove_disk,
.spare_active = raid5_spare_active,
- .sync_request = sync_request,
+ .sync_request = raid5_sync_request,
.resize = raid5_resize,
.size = raid5_size,
.check_reshape = raid5_check_reshape,
]
|
| 464/2 |
2026/09/09 21:34 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 57305
output: 40
thoughts: 1355
Thoughts: **Root Cause Analysis and Kernel History Deep Dive**
Okay, so I'm looking at this crash in `raid5_run()`, which was formerly known as just `run` back in 2016 (thanks, `849674e4fb17`!). The provided analysis is pretty clear. The core issue is the failure to clear reshape parameters (specifically, `mddev->delta_disks`) when a RAID array is deactivated (`inactive`) *before* the reshape operation actually begins.
Let's break down the crash scenario in the context of the code. A RAID5 array is created and active. A reshape is requested by changing the number of disks, which leads to `delta_disks` being set to a non-zero value. Then, the array is stopped (deactivated). During this deactivation, the personality is detached, and private data freed. However, crucially, the pending reshape parameters, like `delta_disks`, aren't cleared when it's stopped via `mode == 2`, unlike a full stop (`mode == 0`). Later, when the array is restarted, `raid5_run()` (the `run` method for RAID5) is called. It checks if a reshape is in progress (which it isn't because `reshape_position` is still `MaxSector`). The code assumes that if no reshape is in progress, there shouldn't be any pending reshape parameters. However, `delta_disks` is still non-zero from the initial reshape request, which triggers the `BUG_ON` assertion.
Now, my mind starts to race. The key is that `BUG_ON(mddev->delta_disks != 0)`! Where did that come from? The text mentions `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"") from 2009. Bingo! That commit introduced the problematic `BUG_ON`.
But before that, how did the code behave? Before that commit, if `mddev->delta_disks` was non-zero and `mddev->reshape_position` was `MaxSector`, the code in `run()` would just... run! It would seemingly proceed with the configuration change, assigning the current raid disks to the previous raid disks and current disks! This is what I want to verify, because I wonder if this was ever considered an actual bug previously.
Now, my focus shifts to the sequence of events. When and how was `delta_disks` set? I need to understand when `update_raid_disks` was introduced and how the interaction with stopping and starting arrays evolved. I need to trace the history of `update_raid_disks`, `__md_stop()`, and `do_md_stop` to understand the evolution of this code path and where the disconnect happened. It sounds like before `91adb56473febeeb3ef657bb5147ddd355465700` there was no `BUG_ON()`, so what was the state of online reshaping support at that point? The answer is likely there!
|
| 465/2 |
2026/09/09 21:34 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:update_raid_disks]
Results: map[Output:fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
da943b9912df [PATCH] md: allow md/raid_disks to be settable
96de1e663cda [PATCH] md: fix some locking and module refcounting issues with md's use of sysfs
eae1701fbd26 [PATCH] md: initial sysfs support for md
]
|
| 466/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 59515
output: 25
thoughts: 17
Thoughts: Okay, here's my attempt at summarizing the thought process, as requested, geared toward an expert audience and written in the first person:
**Decoding the Identifier: da943b9912df**
Alright, let's dissect this. "da943b9912df"... Immediately, my mind jumps to the familiar ground of a hexadecimal representation. The length is a good indicator β it's likely a 12-character hex string. Depending on the context, this could be anything from a short hash, a unique identifier within a system, a database key, or perhaps even a compressed representation of something larger. Without further context, it's impossible to pinpoint its exact meaning. However, my instincts immediately start probing for clues: What system or library is this likely associated with? What's the typical format in that environment? Are there any standard checksum algorithms that produce similar output lengths? I'd need to dig deeper into the codebase or data dictionary where this surfaced to understand its origin and purpose. It could even be a short code. I would certainly check the system documentation for any keys or IDs that start with "da".
|
| 467/2 |
2026/09/09 21:35 |
tool |
git-show |
0m
Args:
Results: map[Output:commit da943b9912df063322d37b1a1f285460531d481d
Author: NeilBrown <neil@brown.name>
Date: Fri Jan 6 00:20:54 2006 -0800
[PATCH] md: allow md/raid_disks to be settable
If array is active, try to reshape, else just set the value.
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/md.txt b/Documentation/md.txt
index a3eadf8e1701..69f742dee00f 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -165,6 +165,9 @@ All md devices contain:
in a fully functional array. If this is not yet known, the file
will be empty. If an array is being resized (not currently
possible) this will contain the larger of the old and new sizes.
+ Some raid level (RAID1) allow this value to be set while the
+ array is active. This will reconfigure the array. Otherwise
+ it can only be set while assembling an array.
chunk_size
This is the size if bytes for 'chunks' and is only relevant to
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 32a4e2311e43..86e9f2efae5c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1843,7 +1843,27 @@ raid_disks_show(mddev_t *mddev, char *page)
return sprintf(page, "%d\n", mddev->raid_disks);
}
-static struct md_sysfs_entry md_raid_disks = __ATTR_RO(raid_disks);
+static int update_raid_disks(mddev_t *mddev, int raid_disks);
+
+static ssize_t
+raid_disks_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ /* can only set raid_disks if array is not yet active */
+ char *e;
+ int rv = 0;
+ unsigned long n = simple_strtoul(buf, &e, 10);
+
+ if (!*buf || (*e && *e != '\n'))
+ return -EINVAL;
+
+ if (mddev->pers)
+ rv = update_raid_disks(mddev, n);
+ else
+ mddev->raid_disks = n;
+ return rv ? rv : len;
+}
+static struct md_sysfs_entry md_raid_disks =
+__ATTR(raid_disks, 0644, raid_disks_show, raid_disks_store);
static ssize_t
chunk_size_show(mddev_t *mddev, char *page)
@@ -3201,6 +3221,33 @@ static int update_size(mddev_t *mddev, unsigned long size)
return rv;
}
+static int update_raid_disks(mddev_t *mddev, int raid_disks)
+{
+ int rv;
+ /* change the number of raid disks */
+ if (mddev->pers->reshape == NULL)
+ return -EINVAL;
+ if (raid_disks <= 0 ||
+ raid_disks >= mddev->max_disks)
+ return -EINVAL;
+ if (mddev->sync_thread)
+ return -EBUSY;
+ rv = mddev->pers->reshape(mddev, raid_disks);
+ if (!rv) {
+ struct block_device *bdev;
+
+ bdev = bdget_disk(mddev->gendisk, 0);
+ if (bdev) {
+ down(&bdev->bd_inode->i_sem);
+ i_size_write(bdev->bd_inode, mddev->array_size << 10);
+ up(&bdev->bd_inode->i_sem);
+ bdput(bdev);
+ }
+ }
+ return rv;
+}
+
+
/*
* update_array_info is used to change the configuration of an
* on-line array.
@@ -3252,28 +3299,9 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
if (mddev->size != info->size)
rv = update_size(mddev, info->size);
- if (mddev->raid_disks != info->raid_disks) {
- /* change the number of raid disks */
- if (mddev->pers->reshape == NULL)
- return -EINVAL;
- if (info->raid_disks <= 0 ||
- info->raid_disks >= mddev->max_disks)
- return -EINVAL;
- if (mddev->sync_thread)
- return -EBUSY;
- rv = mddev->pers->reshape(mddev, info->raid_disks);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- down(&bdev->bd_inode->i_sem);
- i_size_write(bdev->bd_inode, mddev->array_size << 10);
- up(&bdev->bd_inode->i_sem);
- bdput(bdev);
- }
- }
- }
+ if (mddev->raid_disks != info->raid_disks)
+ rv = update_raid_disks(mddev, info->raid_disks);
+
if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) {
if (mddev->pers->quiesce == NULL)
return -EINVAL;
]
|
| 468/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 61457
output: 35
thoughts: 22
Thoughts: Okay, here's my take on those thoughts, framed as an expert's self-reflection:
**Investigating the Origins of `check_reshape`**
Right, so I need to find out when this `check_reshape` function or feature was actually introduced. A good starting point is always the version control system. I'll reach for `git log` - a real powerhouse for this kind of investigation. And specifically, I'll use the `-S` option β that's the "pickaxe" to search for commits that *introduced* or *removed* the string "check_reshape". This should quickly pinpoint the commit(s) where this functionality first appeared, or perhaps changed significantly. This seems like the most direct and efficient approach to trace the history and understand the evolution of this element. Let's see what comes up.
|
| 469/2 |
2026/09/09 21:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:check_reshape Count:10 PathPrefix:drivers/md/]
Results: map[Output:207c5656c33d md: factor out helper to start reshape from action_store()
415c7451872b md: Remove deprecated CONFIG_MD_FAULTY
897c62a1cae6 md: factor out a helper to choose sync action from md_check_recovery()
e74c874eabe2 dm raid: clean up four equivalent goto tags in raid_ctr()
873f50ece41a md: fix data corruption for raid456 when reshape restart while grow up
7a7c330fc266 dm raid: support delta_disks for raid1, fix table output
469b304b58c4 dm raid: enhance reshape check and factor out reshape setup
b1956dc4fa5c dm raid: fix ctr memory leaks on error paths
9dbd1aa3a81c dm raid: add reshaping support to the target
849674e4fb17 MD: rename some functions
]
|
| 470/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 61944
output: 43
thoughts: 12
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Investigating the `check_reshape` Function's History**
Alright, I'm thinking I need to delve into the commit history related to the `check_reshape` function. The current implementation isn't quite clicking with me, or perhaps I'm trying to refine it. I need to refresh my memory, understand the evolution of this routine, and potentially identify the rationale behind specific design choices. I'm going to scan through the earlier commits to see how `check_reshape` was initially conceived and how its implementation has changed over time. The goal is to gain a more thorough understanding of its development, hopefully enabling me to recognize any opportunities for optimization, clarification, or even correction of potential issues. I'll be looking for design decisions, bug fixes, or performance optimizations that were made, perhaps looking to understand if this is an area where technical debt has accumulated and should be paid down.
|
| 471/2 |
2026/09/09 21:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:check_reshape Count:15 PathPrefix:drivers/md/ Since:16 years]
Results: map[Output:207c5656c33d md: factor out helper to start reshape from action_store()
415c7451872b md: Remove deprecated CONFIG_MD_FAULTY
897c62a1cae6 md: factor out a helper to choose sync action from md_check_recovery()
e74c874eabe2 dm raid: clean up four equivalent goto tags in raid_ctr()
873f50ece41a md: fix data corruption for raid456 when reshape restart while grow up
7a7c330fc266 dm raid: support delta_disks for raid1, fix table output
469b304b58c4 dm raid: enhance reshape check and factor out reshape setup
b1956dc4fa5c dm raid: fix ctr memory leaks on error paths
9dbd1aa3a81c dm raid: add reshaping support to the target
849674e4fb17 MD: rename some functions
6791875e2e53 md: make reconfig_mutex optional for writes to md sysfs files.
3ea7daa5d7fd md/raid10: add reshape support
fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
]
|
| 472/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 62534
output: 41
thoughts: 33
Thoughts: Okay, let's dive into this. Here's how I'd approach this task, as if these were my internal thoughts:
**Investigating the Origins of `check_reshape`**
Right, so `check_reshape`... that was around 2009, wasn't it? Okay, I need to pinpoint the *exact* commit where that functionality was first introduced. Knowing the approximate year is a good starting point, but I need the granular details. I need to track down that initial commit. That's the key to understanding its design, evolution, and potential dependencies. I'm going to start digging into the version control logs to find that first implementation. Let's see if I can find it.
|
| 473/2 |
2026/09/09 21:35 |
tool |
git-log |
0m
Args: map[CodeRegexp:check_reshape Count:5 PathPrefix:include/linux/raid/md_k.h]
Results: map[Output:43b2e5d86d8b md: move md_k.h from include/linux/raid/ to drivers/md/
63c70c4f3a30 [PATCH] md: Split reshape handler in check_reshape and start_reshape
]
|
| 474/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 62837
output: 27
thoughts: 53
Thoughts: Here's my take on that patch, thinking out loud:
**Diving into the Reshape Logic**
Okay, so `63c70c4f3a30` caught my eye. The commit message says "Split reshape handler in check_reshape and start_reshape". Hmm, that sounds like a good move, generally speaking. Breaking down a complex handler like reshape into smaller, more focused functions is usually a win for maintainability and clarity. It allows for easier debugging, testing, and understanding of the code's flow. Let's dig in and see *how* they've split it. I'm expecting to find that the "check_reshape" function likely deals with the validation and sanity checks of the requested reshape operation β verifying that the new geometry is valid, that there's enough free space, and handling any potential conflicts. The "start_reshape" function probably handles the actual allocation or reallocation of data, initiating the data migration, and updating metadata. Hopefully, they haven't introduced any regressions or performance bottlenecks in the process... that's the real test. Let's go line by line.
|
| 475/2 |
2026/09/09 21:35 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 63c70c4f3a30e77e6f445bd16eff7934a031ebd3
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 27 01:18:13 2006 -0800
[PATCH] md: Split reshape handler in check_reshape and start_reshape
check_reshape checks validity and does things that can be done instantly -
like adding devices to raid1. start_reshape initiates a restriping process to
convert the whole array.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b9dfdfccdb78..1a637676a930 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2594,7 +2594,7 @@ static int do_md_run(mddev_t * mddev)
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (mddev->reshape_position != MaxSector &&
- pers->reshape == NULL) {
+ pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
mddev->pers = NULL;
module_put(pers->owner);
@@ -3556,14 +3556,16 @@ static int update_raid_disks(mddev_t *mddev, int raid_disks)
{
int rv;
/* change the number of raid disks */
- if (mddev->pers->reshape == NULL)
+ if (mddev->pers->check_reshape == NULL)
return -EINVAL;
if (raid_disks <= 0 ||
raid_disks >= mddev->max_disks)
return -EINVAL;
- if (mddev->sync_thread)
+ if (mddev->sync_thread || mddev->reshape_position != MaxSector)
return -EBUSY;
- rv = mddev->pers->reshape(mddev, raid_disks);
+ mddev->delta_disks = raid_disks - mddev->raid_disks;
+
+ rv = mddev->pers->check_reshape(mddev);
return rv;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index b65b8cfbdf30..04418e10d1dc 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1976,7 +1976,7 @@ static int raid1_resize(mddev_t *mddev, sector_t sectors)
return 0;
}
-static int raid1_reshape(mddev_t *mddev, int raid_disks)
+static int raid1_reshape(mddev_t *mddev)
{
/* We need to:
* 1/ resize the r1bio_pool
@@ -1993,10 +1993,22 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
struct pool_info *newpoolinfo;
mirror_info_t *newmirrors;
conf_t *conf = mddev_to_conf(mddev);
- int cnt;
+ int cnt, raid_disks;
int d, d2;
+ /* Cannot change chunk_size, layout, or level */
+ if (mddev->chunk_size != mddev->new_chunk ||
+ mddev->layout != mddev->new_layout ||
+ mddev->level != mddev->new_level) {
+ mddev->new_chunk = mddev->chunk_size;
+ mddev->new_layout = mddev->layout;
+ mddev->new_level = mddev->level;
+ return -EINVAL;
+ }
+
+ raid_disks = mddev->raid_disks + mddev->delta_disks;
+
if (raid_disks < conf->raid_disks) {
cnt=0;
for (d= 0; d < conf->raid_disks; d++)
@@ -2043,6 +2055,7 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
mddev->degraded += (raid_disks - conf->raid_disks);
conf->raid_disks = mddev->raid_disks = raid_disks;
+ mddev->delta_disks = 0;
conf->last_used = 0; /* just make sure it is in-range */
lower_barrier(conf);
@@ -2084,7 +2097,7 @@ static struct mdk_personality raid1_personality =
.spare_active = raid1_spare_active,
.sync_request = sync_request,
.resize = raid1_resize,
- .reshape = raid1_reshape,
+ .check_reshape = raid1_reshape,
.quiesce = raid1_quiesce,
};
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 089a32604305..355dafb98aac 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2590,21 +2590,15 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
}
#ifdef CONFIG_MD_RAID5_RESHAPE
-static int raid5_reshape(mddev_t *mddev, int raid_disks)
+static int raid5_check_reshape(mddev_t *mddev)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
int err;
- mdk_rdev_t *rdev;
- struct list_head *rtmp;
- int spares = 0;
- int added_devices = 0;
- if (mddev->degraded ||
- test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
- return -EBUSY;
- if (conf->raid_disks > raid_disks)
- return -EINVAL; /* Cannot shrink array yet */
- if (conf->raid_disks == raid_disks)
+ if (mddev->delta_disks < 0 ||
+ mddev->new_level != mddev->level)
+ return -EINVAL; /* Cannot shrink array or change level yet */
+ if (mddev->delta_disks == 0)
return 0; /* nothing to do */
/* Can only proceed if there are plenty of stripe_heads.
@@ -2615,30 +2609,48 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
* If the chunk size is greater, user-space should request more
* stripe_heads first.
*/
- if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
+ if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes ||
+ (mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n",
(mddev->chunk_size / STRIPE_SIZE)*4);
return -ENOSPC;
}
+ err = resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
+ if (err)
+ return err;
+
+ /* looks like we might be able to manage this */
+ return 0;
+}
+
+static int raid5_start_reshape(mddev_t *mddev)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ mdk_rdev_t *rdev;
+ struct list_head *rtmp;
+ int spares = 0;
+ int added_devices = 0;
+
+ if (mddev->degraded ||
+ test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return -EBUSY;
+
ITERATE_RDEV(mddev, rdev, rtmp)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags))
spares++;
- if (conf->raid_disks + spares < raid_disks-1)
+
+ if (spares < mddev->delta_disks-1)
/* Not enough devices even to make a degraded array
* of that size
*/
return -EINVAL;
- err = resize_stripes(conf, raid_disks);
- if (err)
- return err;
-
atomic_set(&conf->reshape_stripes, 0);
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
- conf->raid_disks = raid_disks;
+ conf->raid_disks += mddev->delta_disks;
conf->expand_progress = 0;
conf->expand_lo = 0;
spin_unlock_irq(&conf->device_lock);
@@ -2660,12 +2672,8 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
break;
}
- mddev->degraded = (raid_disks - conf->previous_raid_disks) - added_devices;
- mddev->new_chunk = mddev->chunk_size;
- mddev->new_layout = mddev->layout;
- mddev->new_level = mddev->level;
- mddev->raid_disks = raid_disks;
- mddev->delta_disks = raid_disks - conf->previous_raid_disks;
+ mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) - added_devices;
+ mddev->raid_disks = conf->raid_disks;
mddev->reshape_position = 0;
mddev->sb_dirty = 1;
@@ -2679,7 +2687,6 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
- mddev->delta_disks = 0;
conf->expand_progress = MaxSector;
spin_unlock_irq(&conf->device_lock);
return -EAGAIN;
@@ -2752,7 +2759,8 @@ static struct mdk_personality raid5_personality =
.sync_request = sync_request,
.resize = raid5_resize,
#ifdef CONFIG_MD_RAID5_RESHAPE
- .reshape = raid5_reshape,
+ .check_reshape = raid5_check_reshape,
+ .start_reshape = raid5_start_reshape,
#endif
.quiesce = raid5_quiesce,
};
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 1a6f9f2f6282..002ee631fabb 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -261,7 +261,8 @@ struct mdk_personality
int (*spare_active) (mddev_t *mddev);
sector_t (*sync_request)(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster);
int (*resize) (mddev_t *mddev, sector_t sectors);
- int (*reshape) (mddev_t *mddev, int raid_disks);
+ int (*check_reshape) (mddev_t *mddev);
+ int (*start_reshape) (mddev_t *mddev);
int (*reconfig) (mddev_t *mddev, int layout, int chunk_size);
/* quiesce moves between quiescence states
* 0 - fully active
]
|
| 476/2 |
2026/09/09 21:35 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 66541
output: 46
thoughts: 1339
Thoughts: **Analyzing the Delta Disks Bug in the Linux MD RAID Driver**
Okay, let's break this down. My initial thought process is centered around understanding the introduction and impact of the `mddev->delta_disks` variable within the RAID driver, specifically concerning potential bug conditions. I see that `mddev->delta_disks` was introduced in `update_raid_disks()` way back in 2006 (commit `63c70c4f3a30`). Now, the key is the introduction of a `BUG_ON` check related to this variable, which appeared later. I need to pinpoint when that check was added.
My initial check reveals `91adb56473feb` in 2009 introduces this very `BUG_ON` condition, specifically when a reshape or level change wasn't occurring: `BUG_ON(mddev->delta_disks != 0)`. It's essential to understand the context. This `BUG_ON` assertion suggests that `delta_disks` *should* be zero when a reshape operation is *not* underway.
The next thing I noticed is a significant commit (`34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`). NeilBrown's comment is critical: consistency between the new_* fields and the normal fields. In essence, during a reshape, the `new_*` fields are set to what the new values will be, and the regular fields are left alone. After the reshape, the `new_*` fields are set to what the old regular fields were. A later patch will throw a bug if these are inconsistent. I need to see how the code was changed as a result of that commit.
I see that `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` modifies `layout_store`, `chunk_size_store`, and `do_md_run`. It standardizes how these sysfs attributes are handled, ensuring that when no reshape is in progress, the `new_*` fields are kept consistent with the "normal" fields. I notice the commit moves the setting of `mddev->layout` and `mddev->chunk_size` from conditional statements to always-on assignments, and the conditional logic is moved to make sure the "normal" fields are set. The `do_md_run` also has some consistency checks. This makes me suspect the bug may lie in the interaction with the stopping of the array, and how that interacts with a potential, partial reshape.
I'm now thinking `91adb56473febeeb3ef657bb5147ddd355465700` is probably the *real* commit to focus on, as it's the one that adds the `BUG_ON` conditions Neil Brown was talking about. It checks for inconsistency of `level`, `layout`, `chunk_size`, and the critical `delta_disks`.
Finally, to refine my understanding, I need to see how `do_md_stop()` functioned around the time of the `91adb56473feb` commit in March 2009. I need to look at the exact code from that period to see if any logic related to disk removal/addition, state transitions, or handling of `delta_disks` during stopping could have introduced a problem. Perhaps stopping the array without a full completion of the reshape, might have lead to a state where the check fails, and leads to the bug.
|
| 477/2 |
2026/09/09 21:36 |
tool |
git-log |
0m
Error:
Args: map[Count:5 PathPrefix:drivers/md/md.c Since:17 years SymbolName:do_md_stop]
Results:
|
| 478/2 |
2026/09/09 21:36 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 68738
output: 27
thoughts: 376
Thoughts: **Analyzing the Evolution of `do_md_stop` in the Linux Kernel's MD Driver**
Okay, so I'm looking at the evolution of `do_md_stop` in the `drivers/md/md.c` file. I've already pulled some commits related to this function, specifically focusing on `do_md_stop` and `md_set_readonly`. I've got a list of commits here: `650b2e69ff6a`, `f72ffdd68616`, `a05b7ea03d72`, `fd01b88c75a7`, `a4bd82d0d03b`, `df5b20cf68f9`, and `9e653b6342c9`. They touch upon cleaning up openers, whitespace, crash avoidance, removing typedefs, splitting the function, control of stopping behavior, and sysfs integration. That's a decent start, a good overview, but I think I want to zoom in a bit deeper on a specific point in time to understand a particular refactoring.
Aha! There's a commit, `6177b472ab14e1ac88896960370dd54ba577d926`, which seems to be the start of a refactoring of `do_md_stop`. My instinct is to understand what that looked like *just* before the refactoring. Therefore, I need to see the code *before* the changes introduced by this commit. Let's look at `6177b472ab14e~1:drivers/md/md.c` and specifically focus on the area around `do_md_stop` to understand the starting point. This should give me a good baseline for comparison and a better grasp on the intent and impact of the changes.
|
| 479/2 |
2026/09/09 21:36 |
tool |
git-show |
0m
Args: map[Commit:6177b472ab14e]
Results: map[Output:commit 6177b472ab14e1ac88896960370dd54ba577d926
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 29 11:37:13 2010 +1100
md: start to refactor do_md_stop
do_md_stop is large and clunky, so hard to understand.
This is a first step of refactoring, pulling two simple
sub-functions out.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e752332268d2..002d0a34d6ea 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4568,6 +4568,58 @@ void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
+static void md_clean(mddev_t *mddev)
+{
+ mddev->array_sectors = 0;
+ mddev->external_size = 0;
+ mddev->dev_sectors = 0;
+ mddev->raid_disks = 0;
+ mddev->recovery_cp = 0;
+ mddev->resync_min = 0;
+ mddev->resync_max = MaxSector;
+ mddev->reshape_position = MaxSector;
+ mddev->external = 0;
+ mddev->persistent = 0;
+ mddev->level = LEVEL_NONE;
+ mddev->clevel[0] = 0;
+ mddev->flags = 0;
+ mddev->ro = 0;
+ mddev->metadata_type[0] = 0;
+ mddev->chunk_sectors = 0;
+ mddev->ctime = mddev->utime = 0;
+ mddev->layout = 0;
+ mddev->max_disks = 0;
+ mddev->events = 0;
+ mddev->delta_disks = 0;
+ mddev->new_level = LEVEL_NONE;
+ mddev->new_layout = 0;
+ mddev->new_chunk_sectors = 0;
+ mddev->curr_resync = 0;
+ mddev->resync_mismatches = 0;
+ mddev->suspend_lo = mddev->suspend_hi = 0;
+ mddev->sync_speed_min = mddev->sync_speed_max = 0;
+ mddev->recovery = 0;
+ mddev->in_sync = 0;
+ mddev->degraded = 0;
+ mddev->barriers_work = 0;
+ mddev->safemode = 0;
+ mddev->bitmap_info.offset = 0;
+ mddev->bitmap_info.default_offset = 0;
+ mddev->bitmap_info.chunksize = 0;
+ mddev->bitmap_info.daemon_sleep = 0;
+ mddev->bitmap_info.max_write_behind = 0;
+}
+
+static void md_stop(mddev_t *mddev)
+{
+ mddev->pers->stop(mddev);
+ if (mddev->pers->sync_request && mddev->to_remove == NULL)
+ mddev->to_remove = &md_redundancy_group;
+ module_put(mddev->pers->owner);
+ mddev->pers = NULL;
+
+}
+
/* mode:
* 0 - completely stop and dis-assemble array
* 1 - switch to readonly
@@ -4608,14 +4660,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mddev->ro)
set_disk_ro(disk, 0);
- mddev->pers->stop(mddev);
+ md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- module_put(mddev->pers->owner);
- if (mddev->pers->sync_request && mddev->to_remove == NULL)
- mddev->to_remove = &md_redundancy_group;
- mddev->pers = NULL;
+
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4663,44 +4712,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
export_array(mddev);
- mddev->array_sectors = 0;
- mddev->external_size = 0;
- mddev->dev_sectors = 0;
- mddev->raid_disks = 0;
- mddev->recovery_cp = 0;
- mddev->resync_min = 0;
- mddev->resync_max = MaxSector;
- mddev->reshape_position = MaxSector;
- mddev->external = 0;
- mddev->persistent = 0;
- mddev->level = LEVEL_NONE;
- mddev->clevel[0] = 0;
- mddev->flags = 0;
- mddev->ro = 0;
- mddev->metadata_type[0] = 0;
- mddev->chunk_sectors = 0;
- mddev->ctime = mddev->utime = 0;
- mddev->layout = 0;
- mddev->max_disks = 0;
- mddev->events = 0;
- mddev->delta_disks = 0;
- mddev->new_level = LEVEL_NONE;
- mddev->new_layout = 0;
- mddev->new_chunk_sectors = 0;
- mddev->curr_resync = 0;
- mddev->resync_mismatches = 0;
- mddev->suspend_lo = mddev->suspend_hi = 0;
- mddev->sync_speed_min = mddev->sync_speed_max = 0;
- mddev->recovery = 0;
- mddev->in_sync = 0;
- mddev->degraded = 0;
- mddev->barriers_work = 0;
- mddev->safemode = 0;
- mddev->bitmap_info.offset = 0;
- mddev->bitmap_info.default_offset = 0;
- mddev->bitmap_info.chunksize = 0;
- mddev->bitmap_info.daemon_sleep = 0;
- mddev->bitmap_info.max_write_behind = 0;
+ md_clean(mddev);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
]
|
| 480/2 |
2026/09/09 21:36 |
llm |
fixes-finder-compressor |
0m
Model:
Reply: ### Summary of Investigation
#### 1. Core Problem and Fix Analysis
- **Crash Location:** `drivers/md/raid5.c:8117` in `raid5_run()` (or `run()` historically):
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- Crashed here!
}
```
- **Scenario:**
1. User starts RAID5 array (`array_state` -> `"active"`).
2. Reshape requested via `raid_disks` sysfs attribute -> `update_raid_disks()` sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. Reshape doesn't start immediately (`mddev->reshape_position` remains `MaxSector`).
3. User stops array temporarily by writing `"inactive"` to `array_state`, triggering `do_md_stop(mddev, 2)` -> `__md_stop(mddev)`.
4. `mode == 2` in `do_md_stop()` detaches personality via `__md_stop()`, but only `mode == 0` calls `md_clean(mddev)` (which clears `delta_disks`, etc.). Thus, `mddev->delta_disks` remains `1`.
5. User restarts array by writing `"active"` to `array_state` -> `md_run()` -> `raid5_run()`.
6. `raid5_run()` sees `reshape_position == MaxSector` (reshape never started), hits `else` branch, and asserts `BUG_ON(mddev->delta_disks != 0)`.
- **The Fix:**
Adds cleanup of pending reshape parameters in `__md_stop()` when `mddev->reshape_position == MaxSector`:
```c
diff --git a/drivers/md/md.c b/drivers/md/md.c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
#### 2. Approaches Tried & Historical Findings
- **Examined `__md_stop()` history:**
- Introduced/factored out by NeilBrown in commit `5eff3c439d347` ("md: make sure everything is freed when dm-raid stops an array", Nov 2012) and `6177b472ab14e` ("md: start to refactor do_md_stop", Mar 2010).
- In `6177b472ab14e`, `md_clean()` was extracted from the `mode == 0` path of `do_md_stop()`. `md_clean()` cleared `delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors`.
- **Examined `BUG_ON` assertion origin in `raid5_run()`:**
- Checked `drivers/md/raid5.c` history around line 8117.
- Commit `91adb56473feb` ("md/raid5: refactor raid5 'run'", Mar 31, 2009):
NeilBrown added the `else` block containing the `BUG_ON`s:
```c
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
```
- Directly preceding commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` ("md: make sure new_level, new_chunksize, new_layout always have sensible values.", Mar 31, 2009):
NeilBrown explained:
> "When an md array is undergoing a change, we have new_* fields that show the new values.
> When no change is happening, it is least confusing if these have the same value as the normal fields.
> This is true in most cases, but not when the values are set via sysfs.
> So fix this up.
> A subsequent patch will BUG_ON if these things aren't consistent."
- **Examined sysfs array states and stopping:**
- Writing `"inactive"` to `array_state` triggers `do_md_stop(mddev, 2)`, which stops writes and detaches the personality without calling `md_clean()`.
- Writing to sysfs `raid_disks` calls `update_raid_disks()` which sets `delta_disks`.
#### 3. Active Lines of Investigation / Candidates for Bug-Introducing Commit
Need to identify the exact commit that introduced this bug:
- Candidate A: `91adb56473feb` ("md/raid5: refactor raid5 'run'"): Added the `BUG_ON(mddev->delta_disks != 0)` when no reshape is running, without ensuring stopping an array in `inactive` state (or stopping an array with pending unstarted reshape) clears `delta_disks`.
- Candidate B: `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` ("md: make sure new_level, new_chunksize, new_layout always have sensible values."): NeilBrown updated `layout_store` and `chunk_size_store` to keep `new_*` consistent, noted that a subsequent patch will `BUG_ON`, but didn't handle `delta_disks` / stopping inactive array.
- Candidate C: `f67055780caa` or earlier reshape commits (e.g., when reshape via sysfs was introduced).
- Candidate D: When `do_md_stop(mddev, 2)` or `__md_stop()` was introduced or modified.
- Candidate E: A commit in the online reshape / grow series from 2009 (such as when `check_reshape` or `update_raid_disks` started setting `delta_disks` while active).
#### 4. Next Steps
- Trace what happened in git history when `check_reshape` and online reshape were introduced (check commits around March/April/May 2009 by NeilBrown, e.g., git log around `91adb56473feb`).
- Verify when `update_raid_disks` started setting `delta_disks` on an active array without starting reshape immediately.
- Determine whether `91adb56473feb` or another specific commit in that series introduced the assumption/bug that triggered the crash.
- Avoid broad git log queries that time out; use commit hashes, ranges, or specific symbol logs.
Tokens:
input: 56281
output: 1857
thoughts: 0
|
| 481/2 |
2026/09/09 21:36 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 30834
output: 27
thoughts: 291
Thoughts: **Analyzing the `do_md_stop` Function**
Okay, let's dive into this `do_md_stop` function, specifically focusing on commit `6177b472ab14e`. I need to understand how it handles different stop modes. I see that when `mode` is set to `2`, there's a specific sequence of actions. The `mddev->pers->stop(mddev)` function is called, followed by nullifying the merge, unplug, and congestion functions of the request queue. Then, the module owner is released, and if there's a sync request and the device isn't being removed, `mddev->to_remove` is set to `&md_redundancy_group`, and `mddev->pers` becomes NULL. Finally, the system notifies userspace that the device is "inactive."
My immediate thought is that this clearly outlines the steps for a controlled stop when `mode` is 2. The key question now is, what happens in other modes, particularly `mode == 0`? I see in the code below the block with `mode == 2`, variables like `delta_disks` are cleared out only when `mode == 0`. That indicates that mode 0 does a full stop, while `mode == 2` handles an inactive state, but I'll need to confirm that.
The critical piece I need to clarify is when this "inactive" mode, or `mode == 2`, was introduced. I suspect the change is recent, so let's track down the commit where this `mode == 2` or this "inactive" state first appeared in the `do_md_stop` function. I'll start by looking at commit `9e653b6342c9` or similar commits around that timeframe to trace the introduction of this crucial functionality. I need the full history to see what was there before this state was implemented and what problems it solved. This will help me understand the evolution of the MD driver's stopping logic and the purpose of these different modes.
|
| 482/2 |
2026/09/09 21:36 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 9e653b6342c94016f5cc9937061ef99e9c4b4045
Author: NeilBrown <neil@brown.name>
Date: Mon Jun 26 00:27:58 2006 -0700
[PATCH] md: Set/get state of array via sysfs
This allows the state of an md/array to be directly controlled via sysfs and
adds the ability to stop and array without tearing it down.
Array states/settings:
clear
No devices, no size, no level
Equivalent to STOP_ARRAY ioctl
inactive
May have some settings, but array is not active
all IO results in error
When written, doesn't tear down array, but just stops it
suspended (not supported yet)
All IO requests will block. The array can be reconfigured.
Writing this, if accepted, will block until array is quiescent
readonly
no resync can happen. no superblocks get written.
write requests fail
read-auto
like readonly, but behaves like 'clean' on a write request.
clean - no pending writes, but otherwise active.
When written to inactive array, starts without resync
If a write request arrives then
if metadata is known, mark 'dirty' and switch to 'active'.
if not known, block and switch to write-pending
If written to an active array that has pending writes, then fails.
active
fully active: IO and resync can be happening.
When written to inactive array, starts with resync
write-pending (not supported yet)
clean, but writes are blocked waiting for 'active' to be written.
active-idle
like active, but no writes have been seen for a while (100msec).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/md.txt b/Documentation/md.txt
index b19978e035fc..df0b45515775 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -216,6 +216,45 @@ All md devices contain:
period as a number of seconds. The default is 200msec (0.200).
Writing a value of 0 disables safemode.
+ array_state
+ This file contains a single word which describes the current
+ state of the array. In many cases, the state can be set by
+ writing the word for the desired state, however some states
+ cannot be explicitly set, and some transitions are not allowed.
+
+ clear
+ No devices, no size, no level
+ Writing is equivalent to STOP_ARRAY ioctl
+ inactive
+ May have some settings, but array is not active
+ all IO results in error
+ When written, doesn't tear down array, but just stops it
+ suspended (not supported yet)
+ All IO requests will block. The array can be reconfigured.
+ Writing this, if accepted, will block until array is quiessent
+ readonly
+ no resync can happen. no superblocks get written.
+ write requests fail
+ read-auto
+ like readonly, but behaves like 'clean' on a write request.
+
+ clean - no pending writes, but otherwise active.
+ When written to inactive array, starts without resync
+ If a write request arrives then
+ if metadata is known, mark 'dirty' and switch to 'active'.
+ if not known, block and switch to write-pending
+ If written to an active array that has pending writes, then fails.
+ active
+ fully active: IO and resync can be happening.
+ When written to inactive array, starts with resync
+
+ write-pending
+ clean, but writes are blocked waiting for 'active' to be written.
+
+ active-idle
+ like active, but no writes have been seen for a while (safe_mode_delay).
+
+
sync_speed_min
sync_speed_max
This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 34b6902cda46..f6562ee4c6fc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2185,6 +2185,176 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
static struct md_sysfs_entry md_chunk_size =
__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
+/*
+ * The array state can be:
+ *
+ * clear
+ * No devices, no size, no level
+ * Equivalent to STOP_ARRAY ioctl
+ * inactive
+ * May have some settings, but array is not active
+ * all IO results in error
+ * When written, doesn't tear down array, but just stops it
+ * suspended (not supported yet)
+ * All IO requests will block. The array can be reconfigured.
+ * Writing this, if accepted, will block until array is quiessent
+ * readonly
+ * no resync can happen. no superblocks get written.
+ * write requests fail
+ * read-auto
+ * like readonly, but behaves like 'clean' on a write request.
+ *
+ * clean - no pending writes, but otherwise active.
+ * When written to inactive array, starts without resync
+ * If a write request arrives then
+ * if metadata is known, mark 'dirty' and switch to 'active'.
+ * if not known, block and switch to write-pending
+ * If written to an active array that has pending writes, then fails.
+ * active
+ * fully active: IO and resync can be happening.
+ * When written to inactive array, starts with resync
+ *
+ * write-pending
+ * clean, but writes are blocked waiting for 'active' to be written.
+ *
+ * active-idle
+ * like active, but no writes have been seen for a while (100msec).
+ *
+ */
+enum array_state { clear, inactive, suspended, readonly, read_auto, clean, active,
+ write_pending, active_idle, bad_word};
+char *array_states[] = {
+ "clear", "inactive", "suspended", "readonly", "read-auto", "clean", "active",
+ "write-pending", "active-idle", NULL };
+
+static int match_word(const char *word, char **list)
+{
+ int n;
+ for (n=0; list[n]; n++)
+ if (cmd_match(word, list[n]))
+ break;
+ return n;
+}
+
+static ssize_t
+array_state_show(mddev_t *mddev, char *page)
+{
+ enum array_state st = inactive;
+
+ if (mddev->pers)
+ switch(mddev->ro) {
+ case 1:
+ st = readonly;
+ break;
+ case 2:
+ st = read_auto;
+ break;
+ case 0:
+ if (mddev->in_sync)
+ st = clean;
+ else if (mddev->safemode)
+ st = active_idle;
+ else
+ st = active;
+ }
+ else {
+ if (list_empty(&mddev->disks) &&
+ mddev->raid_disks == 0 &&
+ mddev->size == 0)
+ st = clear;
+ else
+ st = inactive;
+ }
+ return sprintf(page, "%s\n", array_states[st]);
+}
+
+static int do_md_stop(mddev_t * mddev, int ro);
+static int do_md_run(mddev_t * mddev);
+static int restart_array(mddev_t *mddev);
+
+static ssize_t
+array_state_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ int err = -EINVAL;
+ enum array_state st = match_word(buf, array_states);
+ switch(st) {
+ case bad_word:
+ break;
+ case clear:
+ /* stopping an active array */
+ if (mddev->pers) {
+ if (atomic_read(&mddev->active) > 1)
+ return -EBUSY;
+ err = do_md_stop(mddev, 0);
+ }
+ break;
+ case inactive:
+ /* stopping an active array */
+ if (mddev->pers) {
+ if (atomic_read(&mddev->active) > 1)
+ return -EBUSY;
+ err = do_md_stop(mddev, 2);
+ }
+ break;
+ case suspended:
+ break; /* not supported yet */
+ case readonly:
+ if (mddev->pers)
+ err = do_md_stop(mddev, 1);
+ else {
+ mddev->ro = 1;
+ err = do_md_run(mddev);
+ }
+ break;
+ case read_auto:
+ /* stopping an active array */
+ if (mddev->pers) {
+ err = do_md_stop(mddev, 1);
+ if (err == 0)
+ mddev->ro = 2; /* FIXME mark devices writable */
+ } else {
+ mddev->ro = 2;
+ err = do_md_run(mddev);
+ }
+ break;
+ case clean:
+ if (mddev->pers) {
+ restart_array(mddev);
+ spin_lock_irq(&mddev->write_lock);
+ if (atomic_read(&mddev->writes_pending) == 0) {
+ mddev->in_sync = 1;
+ mddev->sb_dirty = 1;
+ }
+ spin_unlock_irq(&mddev->write_lock);
+ } else {
+ mddev->ro = 0;
+ mddev->recovery_cp = MaxSector;
+ err = do_md_run(mddev);
+ }
+ break;
+ case active:
+ if (mddev->pers) {
+ restart_array(mddev);
+ mddev->sb_dirty = 0;
+ wake_up(&mddev->sb_wait);
+ err = 0;
+ } else {
+ mddev->ro = 0;
+ err = do_md_run(mddev);
+ }
+ break;
+ case write_pending:
+ case active_idle:
+ /* these cannot be set */
+ break;
+ }
+ if (err)
+ return err;
+ else
+ return len;
+}
+static struct md_sysfs_entry md_array_state = __ATTR(array_state, 0644, array_state_show, array_state_store);
+
static ssize_t
null_show(mddev_t *mddev, char *page)
{
@@ -2553,6 +2723,7 @@ static struct attribute *md_default_attrs[] = {
&md_metadata.attr,
&md_new_device.attr,
&md_safe_delay.attr,
+ &md_array_state.attr,
NULL,
};
@@ -2919,11 +3090,8 @@ static int restart_array(mddev_t *mddev)
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
err = 0;
- } else {
- printk(KERN_ERR "md: %s has no personality assigned.\n",
- mdname(mddev));
+ } else
err = -EINVAL;
- }
out:
return err;
@@ -2955,7 +3123,12 @@ static void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
-static int do_md_stop(mddev_t * mddev, int ro)
+/* mode:
+ * 0 - completely stop and dis-assemble array
+ * 1 - switch to readonly
+ * 2 - stop but do not disassemble array
+ */
+static int do_md_stop(mddev_t * mddev, int mode)
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
@@ -2977,12 +3150,15 @@ static int do_md_stop(mddev_t * mddev, int ro)
invalidate_partition(disk, 0);
- if (ro) {
+ switch(mode) {
+ case 1: /* readonly */
err = -ENXIO;
if (mddev->ro==1)
goto out;
mddev->ro = 1;
- } else {
+ break;
+ case 0: /* disassemble */
+ case 2: /* stop */
bitmap_flush(mddev);
md_super_wait(mddev);
if (mddev->ro)
@@ -3002,7 +3178,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
mddev->in_sync = 1;
md_update_sb(mddev);
}
- if (ro)
+ if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
@@ -3010,7 +3186,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
/*
* Free resources if final stop
*/
- if (!ro) {
+ if (mode == 0) {
mdk_rdev_t *rdev;
struct list_head *tmp;
struct gendisk *disk;
@@ -3034,6 +3210,9 @@ static int do_md_stop(mddev_t * mddev, int ro)
export_array(mddev);
mddev->array_size = 0;
+ mddev->size = 0;
+ mddev->raid_disks = 0;
+
disk = mddev->gendisk;
if (disk)
set_capacity(disk, 0);
]
|
| 483/2 |
2026/09/09 21:36 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 35448
output: 24
thoughts: 189
Thoughts: **Analyzing Potential RAID5 Bug Origins**
Okay, so I'm diving into this commit history, trying to trace a potential issue. My initial thought is to zero in on this older commit, `9e653b6342c9`, from way back in 2006. My internal radar pinged on that timestamp; it feels significant. Specifically, I'm noting that in that era, within the `do_md_stop()` function, when `mode` was equal to `2`, the system exhibited a 'detached personality' behavior, but crucially, it *didn't* clear array parameters. That's immediately suspect. I need to keep that in mind as a potential source of problems.
Now, my attention's been drawn to the `BUG_ON(mddev->delta_disks != 0)` check inside `raid5_run()`. It's a standard check, but I need to figure out when this assertion was introduced. Ah, here it is: Commit `91adb56473febeeb3ef657bb5147ddd355465700`. Interesting. Now, I need to go back and double-check, because the relationship with the first commit is important. Let's pull up and meticulously examine commit `91adb56473feb` again, just to be thorough.
|
| 484/2 |
2026/09/09 21:36 |
tool |
git-show |
0m
Args: map[Commit:91adb56473feb]
Results: map[Output:commit 91adb56473febeeb3ef657bb5147ddd355465700
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:39 2009 +1100
md/raid5: refactor raid5 "run"
.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index edbc80c4d346..d019a85547b4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4164,95 +4164,49 @@ static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- int working_disks = 0;
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
}
- if ((mddev->level == 5 && !algorithm_valid_raid5(mddev->layout)) ||
- (mddev->level == 6 && !algorithm_valid_raid6(mddev->layout))) {
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
printk(KERN_ERR "raid5: %s: layout %d not supported\n",
- mdname(mddev), mddev->layout);
- return -EIO;
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
}
-
- if (mddev->chunk_size < PAGE_SIZE) {
- printk(KERN_ERR "md/raid5: chunk_size must be at least "
- "PAGE_SIZE but %d < %ld\n",
- mddev->chunk_size, PAGE_SIZE);
- return -EINVAL;
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
- int max_degraded = (mddev->level == 5 ? 1 : 2);
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "(reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old
- * geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*
- (mddev->raid_disks - max_degraded))) {
- printk(KERN_ERR "raid5: reshape_position not "
- "on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*
- (old_disks-max_degraded));
- /* here_old is the first stripe that we might need to read
- * from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for "
- "auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
}
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
@@ -4264,13 +4218,12 @@ static int run(mddev_t *mddev)
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
}
spin_lock_init(&conf->device_lock);
- mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4299,41 +4252,136 @@ static int run(mddev_t *mddev)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
} else
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
conf->expand_progress = mddev->reshape_position;
- /* device size must be a multiple of chunk size */
- mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
- mddev->resync_max_sectors = mddev->dev_sectors;
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
+ goto abort;
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 5 ? 1 : 2);
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "(reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+ conf = setup_conf(mddev);
+
+ if (conf == NULL)
+ return -EIO;
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
@@ -4341,6 +4389,10 @@ static int run(mddev_t *mddev)
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
@@ -4356,27 +4408,6 @@ static int run(mddev_t *mddev)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
" devices, algorithm %d\n", conf->level, mdname(mddev),
@@ -4419,6 +4450,8 @@ static int run(mddev_t *mddev)
"raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ mddev->queue->queue_lock = &conf->device_lock;
+
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
@@ -4430,7 +4463,11 @@ static int run(mddev_t *mddev)
return 0;
abort:
+ if (mddev->thread)
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 84456b1af204..c172371481c7 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -386,6 +386,11 @@ struct raid5_private_data {
int pool_size; /* number of disks in stripeheads in pool */
spinlock_t device_lock;
struct disk_info *disks;
+
+ /* When taking over an array from a different personality, we store
+ * the new thread here until we fully activate the array.
+ */
+ struct mdk_thread_s *thread;
};
typedef struct raid5_private_data raid5_conf_t;
]
|
| 485/2 |
2026/09/09 21:36 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 41050
output: 38
thoughts: 1245
Thoughts: **Analyzing the `md/raid5` Reshape Logic and Bug Introduction**
Okay, let's break this down. I'm looking at the evolution of the RAID5 reshape code, specifically around the introduction of those `BUG_ON` checks. My initial observation is that, pre-`91adb56473feb`, there was no `else` branch in the code snippet concerning `mddev->reshape_position` and the configuration setup. It just continued with the allocation and configuration.
Then, `91adb56473feb` comes along, and Neil Brown adds an `else` branch, which contains those crucial `BUG_ON` statements. The important thing to note is that these asserts check for inconsistencies between the existing and proposed RAID configuration parameters *if* `reshape_position` is at the maximum sector (`MaxSector`), which effectively signifies no reshape is in progress.
Now, immediately before this commit, there's `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`. That commit's focus was to ensure `new_level`, `new_chunk`, and `new_layout` values were consistent with the regular fields when no reshape was underway. This is where it gets interesting, as this commit mentions inconsistencies due to setting values via sysfs. This fix, however, *didn't* touch `delta_disks`.
Here's the critical question: Did `91adb56473feb` introduce the bug, or was it a pre-existing inconsistency that the `BUG_ON`s in `91adb56473feb` merely *revealed*? The commit `34817e8c3948` does not address `delta_disks`, so the conditions that would violate the new `BUG_ON`s can remain.
Now, let's step back a bit, could the situation be related to stopping and starting the array? Perhaps when the array is stopped after an array reshape process, an incorrect stopping action leads to `mddev->delta_disks` being non-zero, and the `new_*` values staying out of sync.
A bug fix patch includes the following in `__md_stop()`:
```c
if (mddev->reshape_position == MaxSector) {
mddev->delta_disks = 0;
mddev->reshape_backwards = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
mddev->new_chunk_sectors = mddev->chunk_sectors;
}
```
This *strongly* suggests that the problem was indeed related to the state of the array when a reshape isn't in progress and the array is stopped. The patch correctly resets the `delta_disks`, `reshape_backwards`, and the `new_*` fields in this specific case where a reshape is *not* occurring. Essentially, the bug was that these values could be left in an inconsistent state after an array stop.
Therefore, `91adb56473feb` didn't introduce the *bug* per se, it revealed an existing inconsistency, which was not handled in commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`. This is the commit that caused the `BUG_ON` to trigger. I need to now trace the function calls to `__md_stop()`, `md_stop()` and `do_md_stop()` to fully understand how this value could become inconsistent in the first place, and identify any other related code or commits. It looks like the issue stems from the fact that the `new_*` values weren't always updated when a reshape was cancelled or stopped, and `delta_disks` was also not properly reset in all cases, leading to a possible state of inconsistency when no reshape is happening.
|
| 486/2 |
2026/09/09 21:36 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results: map[Output:cefcb9297fbd md raid: fix hang when stopping arrays with metadata through dm-raid
10787568cc1f md: merge mddev serialize_policy into mddev_flags
26292657add3 md: check before referencing mddev->bitmap_ops
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
ca925302e841 md/md-bitmap: merge md_bitmap_flush() into bitmap_operations
16c4770c75b1 dm-raid: really frozen sync_thread during suspend
f52f5c71f3d4 md: fix stopping sync thread
f2d87a759f68 md: fix missing flush of sync_work
b4128c00a653 md: cleanup mddev_create/destroy_serial_pool()
a865b96c513b Revert "md: unlock mddev before reap sync_thread in action_store"
]
|
| 487/2 |
2026/09/09 21:36 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 43472
output: 36
thoughts: 27
Thoughts: Here's a summary of my thought process:
**Analyzing the `__md_stop` Commit History**
Okay, so I'm thinking, "right, I need to understand the evolution of this `__md_stop` element." My first instinct is to get a comprehensive view: I want to see *every single commit* where `__md_stop` was touched. This will give me a timeline of all the changes, additions, deletions, everything related to that specific identifier. That should paint a complete picture of its lifecycle within the codebase.
Then, to really grasp its origin and initial intent, I'll need to pinpoint the *very first* commit that introduced `__md_stop`. Tracing back to the initial commit is crucial. Knowing when it was added, who added it, and what the surrounding context looked like will offer invaluable insight into the design decisions and rationale behind its introduction. This "ground zero" view is often the key to unlocking the 'why' behind its current use.
|
| 488/2 |
2026/09/09 21:36 |
tool |
git-log |
0m
Args: map[CodeRegexp:__md_stop Count:10 PathPrefix:drivers/md/]
Results: map[Output:e9b0a1556ca2 md: check mddev->pers before calling md_set_readonly()
0dd84b319352 md: call __md_stop_writes in md_stop
6aaa58c99427 md: fix memleak for mempool
5eff3c439d34 md: make sure everything is freed when dm-raid stops an array.
30b8aa9172df md: fix possible corruption of array metadata on shutdown.
c744a65c1e2d md: don't set md arrays to readonly on shutdown.
fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
defad61a5b16 md: md_stop_writes requires mddev_lock.
]
|
| 489/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 43952
output: 25
thoughts: 18
Thoughts: Okay, here's my interpretation of what's going through my mind when I encounter this prompt, rendered in the first person:
**Diving into the Commit**
Alright, *commit 5eff3c439d34*... let's get down to it. Given my expertise, I'm already mentally parsing that commit hash. It's not just a string of characters; it's a pointer to a specific state in the project's history. My brain is immediately running through potential scenarios: "Was this a bug fix? Feature implementation? Refactor? Performance optimization? Configuration change?" The sheer brevity of the prompt, a mere request to "see" the commit, suggests the user already knows *what* to expect in general terms and simply wants a high level overview. I'm assuming the prompt is intended to be a deep dive for the user. With that in mind, I need to focus on distilling out the most salient information. I'll need to use any provided information to help provide the user a comprehensive review of the commit.
|
| 490/2 |
2026/09/09 21:37 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 5eff3c439d3478ba9e8ba5f8c0aaf6e6fadb6e58
Author: NeilBrown <neil@brown.name>
Date: Mon Nov 19 10:47:48 2012 +1100
md: make sure everything is freed when dm-raid stops an array.
md_stop() would stop an array, but not free various attached
data structures.
For internal arrays, these are freed later in do_md_stop() or
mddev_put(), but they don't apply for dm-raid arrays.
So get md_stop() to free them, and only all it from dm-raid.
For internal arrays we now call __md_stop.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4c7d880a60a4..61200717687b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5294,7 +5294,7 @@ void md_stop_writes(struct mddev *mddev)
}
EXPORT_SYMBOL_GPL(md_stop_writes);
-void md_stop(struct mddev *mddev)
+static void __md_stop(struct mddev *mddev)
{
mddev->ready = 0;
mddev->pers->stop(mddev);
@@ -5304,6 +5304,18 @@ void md_stop(struct mddev *mddev)
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+
+void md_stop(struct mddev *mddev)
+{
+ /* stop the array and free an attached data structures.
+ * This is called from dm-raid
+ */
+ __md_stop(mddev);
+ bitmap_destroy(mddev);
+ if (mddev->bio_set)
+ bioset_free(mddev->bio_set);
+}
+
EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
@@ -5364,7 +5376,7 @@ static int do_md_stop(struct mddev * mddev, int mode,
set_disk_ro(disk, 0);
__md_stop_writes(mddev);
- md_stop(mddev);
+ __md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
]
|
| 491/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 44972
output: 33
thoughts: 1173
Thoughts: **Analyzing the Evolution of `md_stop` and Reshape in RAID5**
Okay, so it seems `__md_stop` is just a renamed version of `md_stop` introduced in 2012 for the dm-raid wrapper. My interest now lies in the origin of `md_stop`. Let's trace it back. Right, `md_stop` was extracted from `do_md_stop` in 2010 with commit `6177b472ab14e`. Before that, `do_md_stop` itself, which was around since 2006, removed the merge/unplug functions, congestion functions, and unloaded the module. Importantly, I see that the sysfs notification for "inactive" was always there since that initial commit!
But, I need to check when RAID5 reshape was added, to see if there's any relation. Okay, in March 2006, `63c70c4f3a30` introduced the reshape handler split between check and start. `raid5_check_reshape` then called `resize_stripes`. Now the question is: how was `run()` structured back then? I need to check the code!
In 2006, the `run()` function in RAID5 *didn't* have a `BUG_ON` check for `delta_disks != 0`. Huh! If `delta_disks` was, say, 1, and `reshape_position` was at its maximum, `conf->previous_raid_disks` and `conf->raid_disks` were *both* set to the same value, completely ignoring `delta_disks`! It wouldn't have crashed.
Fast forward to 2009, commit `91adb56473febeeb3ef657bb5147ddd355465700` refactored `run()` and crucially *added* `BUG_ON(mddev->delta_disks != 0)`. Now *that's* interesting. It seems like this commit is the key to understanding this. NeilBrown added that specific check. Why? I should check the surrounding commits from March 31, 2009 to find the reasoning. This should provide the missing context for why the `BUG_ON` was added.
|
| 492/2 |
2026/09/09 21:37 |
tool |
git-log |
0m
Args: map[Count:10 PathPrefix:drivers/md/ Since:17 years]
Results: map[Output:3a2c4d55e32a treewide: refresh kmalloc_obj() conversions
7ac81e2d2240 dm-ebs: fix incorrect device offset check in ebs_ctr()
7d4d4f3b668d dm-integrity: fix NULL pointer dereference when the 'R' flag is used
2ccb8878c149 dm cache: fix demotion stats in passthrough mode
18d80c77b4c7 dm-integrity: fix infinite loop on discard with large tag size
59e6f919d77d dm-integrity: fix buffer overflow with keyed discard
b2fd92f016e9 dm-integrity: require stable writes for internal hash modes
bc9781c0247d dm cache: fix issue with background work locking
148845aa1921 dm-crypt: fix a tiny race condition in crypt_dec_pending
dc386aa0ac0a md/raid1: don't set array_frozen in raid1_takeover()
]
|
| 493/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 46963
output: 47
thoughts: 126
Thoughts: **My Git History Exploration**
Okay, so I'm thinking about how to effectively filter this git history, and I need to go back in time, but avoid going *too* far. Seventeen years is probably too broad; that's going back to 2008! Right, "Since" can accept durations, not just specific dates, which means my "17 years" is probably returning everything. But I can't be too specific.
Wait a second, there are other ways! I can work with commit hashes directly to focus my search. I could use `git-log` with the commit hash or look at parent commits. Can `git-log` handle ranges, or go from a specific commit?
Let me test that idea. Time to check `git-show 91adb56473febeeb3ef657bb5147ddd355465700^` and see what it gives me. Let's see if this gets me where I need to go.
|
| 494/2 |
2026/09/09 21:37 |
tool |
git-show |
0m
Args: map[Commit:91adb56473febeeb3ef657bb5147ddd355465700^]
Results: map[Output:commit 34817e8c3948ea20316dfa8fd8947d6d0ee82ba9
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:38 2009 +1100
md: make sure new_level, new_chunksize, new_layout always have sensible values.
When an md array is undergoing a change, we have new_* fields that
show the new values.
When no change is happening, it is least confusing if these have
the same value as the normal fields.
This is true in most cases, but not when the values are set via sysfs.
So fix this up.
A subsequent patch will BUG_ON if these things aren't consistent.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 07ab6790e29d..117ea5fde568 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2633,9 +2633,9 @@ layout_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- if (mddev->reshape_position != MaxSector)
- mddev->new_layout = n;
- else
+
+ mddev->new_layout = n;
+ if (mddev->reshape_position == MaxSector)
mddev->layout = n;
return len;
}
@@ -2702,9 +2702,9 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- else if (mddev->reshape_position != MaxSector)
- mddev->new_chunk = n;
- else
+
+ mddev->new_chunk = n;
+ if (mddev->reshape_position == MaxSector)
mddev->chunk_size = n;
return len;
}
@@ -3831,7 +3831,10 @@ static int do_md_run(mddev_t * mddev)
}
mddev->pers = pers;
spin_unlock(&pers_lock);
- mddev->level = pers->level;
+ if (mddev->level != pers->level) {
+ mddev->level = pers->level;
+ mddev->new_level = pers->level;
+ }
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (pers->level >= 4 && pers->level <= 6)
]
|
| 495/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 48114
output: 51
thoughts: 129
Thoughts: **Analyzing the Hexadecimal Sequence**
Alright, let's dive into this seemingly random sequence: `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`. My initial reaction, as always, is to begin to deconstruct it. Given my expertise, I immediately recognize this as a likely hexadecimal representation. I need to understand its context; what's encoded here? Is it a hash, a key, a serial number, or something else entirely?
Before I can make any assumptions, I also need to establish its context within a potential sequence or dataset. What precedes it? I'll explore the preceding context by examining `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9^`. The `^` is likely denoting a preceding item in a data structure or sequence, allowing me to view a relationship or ordering. This may reveal patterns or relationships.
|
| 496/2 |
2026/09/09 21:37 |
tool |
git-show |
0m
Args: map[Commit:34817e8c3948ea20316dfa8fd8947d6d0ee82ba9^]
Results: map[Output:commit 67cc2b8165857ba019920d1f00d64bcc4140075d
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:38 2009 +1100
md/raid5: finish support for DDF/raid6
DDF requires RAID6 calculations over different devices in a different
order.
For md/raid6, we calculate over just the data devices, starting
immediately after the 'Q' block.
For ddf/raid6 we calculate over all devices, using zeros in place of
the P and Q blocks.
This requires unfortunately complex loops...
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c1d94ed9718b..edbc80c4d346 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -136,6 +136,10 @@ static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
/* Find first data disk in a raid6 stripe */
static inline int raid6_d0(struct stripe_head *sh)
{
+ if (sh->ddf_layout)
+ /* ddf always start from first device */
+ return 0;
+ /* md starts just after Q block */
if (sh->qd_idx == sh->disks - 1)
return 0;
else
@@ -152,13 +156,15 @@ static inline int raid6_next_disk(int disk, int raid_disks)
* 0 .. raid_disks-3, the parity disk is raid_disks-2 and the Q disk
* is raid_disks-1. This help does that mapping.
*/
-static int raid6_idx_to_slot(int idx, struct stripe_head *sh, int *count)
+static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
+ int *count, int syndrome_disks)
{
int slot;
+
if (idx == sh->pd_idx)
- return sh->disks - 2;
+ return syndrome_disks;
if (idx == sh->qd_idx)
- return sh->disks - 1;
+ return syndrome_disks + 1;
slot = (*count)++;
return slot;
}
@@ -1267,6 +1273,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
unsigned long chunk_number;
unsigned int chunk_offset;
int pd_idx, qd_idx;
+ int ddf_layout = 0;
sector_t new_sector;
int sectors_per_chunk = conf->chunk_size >> 9;
int raid_disks = previous ? conf->previous_raid_disks
@@ -1386,6 +1393,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
qd_idx = 0;
} else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
break;
case ALGORITHM_ROTATING_N_RESTART:
@@ -1400,6 +1408,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
qd_idx = 0;
} else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
break;
case ALGORITHM_ROTATING_N_CONTINUE:
@@ -1407,6 +1416,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
pd_idx = raid_disks - 1 - (stripe % raid_disks);
qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
+ ddf_layout = 1;
break;
case ALGORITHM_LEFT_ASYMMETRIC_6:
@@ -1454,6 +1464,7 @@ static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
if (sh) {
sh->pd_idx = pd_idx;
sh->qd_idx = qd_idx;
+ sh->ddf_layout = ddf_layout;
}
/*
* Finally, compute the new sector number
@@ -1642,9 +1653,10 @@ static void compute_parity6(struct stripe_head *sh, int method)
{
raid5_conf_t *conf = sh->raid_conf;
int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count;
+ int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
struct bio *chosen;
/**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ void *ptrs[syndrome_disks+2];
pd_idx = sh->pd_idx;
qd_idx = sh->qd_idx;
@@ -1687,23 +1699,28 @@ static void compute_parity6(struct stripe_head *sh, int method)
}
/* Note that unlike RAID-5, the ordering of the disks matters greatly.*/
- /* FIX: Is this ordering of drives even remotely optimal? */
+
+ for (i = 0; i < disks; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
+
count = 0;
i = d0_idx;
do {
- int slot = raid6_idx_to_slot(i, sh, &count);
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
ptrs[slot] = page_address(sh->dev[i].page);
- if (slot < sh->disks - 2 &&
+ if (slot < syndrome_disks &&
!test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
printk(KERN_ERR "block %d/%d not uptodate "
"on parity calc\n", i, count);
BUG();
}
+
i = raid6_next_disk(i, disks);
} while (i != d0_idx);
- BUG_ON(count+2 != disks);
+ BUG_ON(count != syndrome_disks);
- raid6_call.gen_syndrome(disks, STRIPE_SIZE, ptrs);
+ raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs);
switch(method) {
case RECONSTRUCT_WRITE:
@@ -1761,24 +1778,28 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
{
int i, count, disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : disks-2;
int d0_idx = raid6_d0(sh);
int faila = -1, failb = -1;
/**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ void *ptrs[syndrome_disks+2];
+ for (i = 0; i < disks ; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
count = 0;
i = d0_idx;
do {
- int slot;
- slot = raid6_idx_to_slot(i, sh, &count);
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
ptrs[slot] = page_address(sh->dev[i].page);
+
if (i == dd_idx1)
faila = slot;
if (i == dd_idx2)
failb = slot;
i = raid6_next_disk(i, disks);
} while (i != d0_idx);
- BUG_ON(count+2 != disks);
+ BUG_ON(count != syndrome_disks);
BUG_ON(faila == failb);
if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
@@ -1787,9 +1808,9 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
(unsigned long long)sh->sector, dd_idx1, dd_idx2,
faila, failb);
- if ( failb == disks-1 ) {
+ if (failb == syndrome_disks+1) {
/* Q disk is one of the missing disks */
- if ( faila == disks-2 ) {
+ if (faila == syndrome_disks) {
/* Missing P+Q, just recompute */
compute_parity6(sh, UPDATE_PARITY);
return;
@@ -1804,12 +1825,13 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
}
/* We're missing D+P or D+D; */
- if (failb == disks-2) {
+ if (failb == syndrome_disks) {
/* We're missing D+P. */
- raid6_datap_recov(disks, STRIPE_SIZE, faila, ptrs);
+ raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs);
} else {
/* We're missing D+D. */
- raid6_2data_recov(disks, STRIPE_SIZE, faila, failb, ptrs);
+ raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb,
+ ptrs);
}
/* Both the above update both missing blocks */
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 633d79289616..84456b1af204 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -201,6 +201,7 @@ struct stripe_head {
sector_t sector; /* sector of this row */
short pd_idx; /* parity disk index */
short qd_idx; /* 'Q' disk index for raid6 */
+ short ddf_layout;/* use DDF ordering to calculate Q */
unsigned long state; /* state flags */
atomic_t count; /* nr of active thread/requests */
spinlock_t lock;
]
|
| 497/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 51613
output: 36
thoughts: 170
Thoughts: **My Git Archaeology Quest**
Okay, so I've got this commit hash, `91adb56473feb`, and I need to understand the evolution of the code that led up to it. My first instinct is to zero in on relevant commits, and for that, I'm thinking of focusing on `drivers/md/raid5.c` and its vicinity, given the context of the problem.
Let's begin by searching for commits, but I should probably target a specific time frame, perhaps around March/April of 2009. Author `NeilBrown` might be a good lead; let's see what he was up to. I'll reach for `git-log` β that's the bread and butter. I'll need to figure out the right combination of arguments. CodeRegexp or MessageRegexps seems like a good place to start.
Expanding the net a bit might be a good idea. Instead of just `raid5.c`, I'll broaden the scope to also include `drivers/md/md.c` since they probably interact. I need to be as comprehensive as possible.
Could I also use a search for a specific symbol? What about `SymbolName: raid5_run` or maybe just `SymbolName: run` on `drivers/md/raid5.c`? That might give more specific results, focusing on function calls or definitions. I should see if that works.
Okay, let's refine this. To be precise, I'll use `git-log` with `SymbolName: run` and `SourcePath: drivers/md/raid5.c`. This should pinpoint commits where the 'run' symbol is used or defined in that particular file. I think I'm getting closer to the relevant history.
|
| 498/2 |
2026/09/09 21:37 |
tool |
git-log |
0m
Args: map[Count:20 SourcePath:drivers/md/raid5.c SymbolName:run]
Results: map[Output:752d0464b78a md: clean up accounting for issued sync IO
4f0e7d0e03b7 md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
c396b90e5026 md: add a mddev_trace_remap helper
3a0f007b6979 md: add a new helper rdev_has_badblock()
ad8606702f26 md/raid5: remove rcu protection to access rdev from conf
a9010741ce7c md/raid5: Use the enum req_op and blk_opf_t types
561593a048d7 Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
c75e707fe1aa block: remove the per-bio/request write hint
03a6b195e8e8 raid5: initialize the stripe_head embeeded bios as needed
1c02fca620f7 block: remove the request_queue argument to the block_bio_remap tracepoint
7aba13b71529 md/raid5: add a new member of offset into r5dev
c911c46c017c md/raid456: convert macro STRIPE_* to RAID5_STRIPE_*
ed00aabd5eb9 block: rename generic_make_request to submit_bio_noacct
f1934892bd76 drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
2cd259a77de5 raid5: copy write hint from origin bio to stripe
74d46992e0d9 block: replace bi_bdev with a gendisk pointer and partitions index
ff875738edd4 raid5: separate header for log functions
aaf9f12ebfaf md/raid5: sort bios
765d704db1f5 raid5: only dispatch IO from raid5d for harddisk raid
86aa1397ddfd md/r5cache: read data into orig_page for prexor of cached data
]
|
| 499/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 52761
output: 38
thoughts: 52
Thoughts: Here's my thought process, summarized as if I were considering the situation:
**Investigating a RAID5 Kernel Issue**
Okay, something's flagged in `drivers/md/raid5.c` around line 8117. My first instinct is always to dive deep with the tools. Let's do a `git blame` on that specific line in that file. That's the quickest way to understand the history, who touched it last, and crucially, *why* that code is there. Hopefully, that will give me a starting point for figuring out what's going on with this potential issue and where I should be looking for more information or possible dependencies. Let the investigation commence!
|
| 500/2 |
2026/09/09 21:37 |
tool |
git-blame |
0m
Args: map[End:8125 File:drivers/md/raid5.c Start:8110]
Results: map[Output:91adb56473feb 8110) }
cc6167b4f3b3c 8111) pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
91adb56473feb 8112) /* OK, we should be able to continue; */
91adb56473feb 8113) } else {
91adb56473feb 8114) BUG_ON(mddev->level != mddev->new_level);
91adb56473feb 8115) BUG_ON(mddev->layout != mddev->new_layout);
664e7c413f1e9 8116) BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
91adb56473feb 8117) BUG_ON(mddev->delta_disks != 0);
^1da177e4c3f4 8118) }
91adb56473feb 8119)
3418d036c81dc 8120) if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
3418d036c81dc 8121) test_bit(MD_HAS_PPL, &mddev->flags)) {
3418d036c81dc 8122) pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
3418d036c81dc 8123) mdname(mddev));
3418d036c81dc 8124) clear_bit(MD_HAS_PPL, &mddev->flags);
ddc088238cd69 8125) clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
]
|
| 501/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 53539
output: 28
thoughts: 251
Thoughts: **Analyzing RAID5.c Bug Checks**
Okay, let's break this down. I'm looking at `drivers/md/raid5.c`, specifically lines 8113-8117, and it looks like some core consistency checks are in place. The `git blame` reveals a couple of interesting things. Lines 8113, 8114, 8115, and 8117 all originate from commit `91adb56473feb`, which immediately tells me this section is fairly recent and likely related to a specific change. The `BUG_ON` calls are there to assert these conditions. If the conditions are true, that's unexpected and indicates a problem within the kernel, leading to a hard stop.
However, line 8116 comes from commit `664e7c413f1e9`. Thatβs a different commit, which catches my attention. I need to understand why this specific check β `mddev->chunk_sectors != mddev->new_chunk_sectors` β was introduced separately. What drove that change? The original commit might have been about updating the chunk size, but it is necessary to identify the commit as it could be important. Knowing it, it could have been included for either optimization, or bug fix. I should investigate that commit to get the full picture and its implications on the RAID5 implementation.
|
| 502/2 |
2026/09/09 21:37 |
tool |
git-show |
0m
Args: map[Commit:664e7c413f1e9]
Results: map[Output:commit 664e7c413f1e90eceb0b2596dd73a0832faec058
Author: Andre Noll <maan@systemlinux.org>
Date: Thu Jun 18 08:45:27 2009 +1000
md: Convert mddev->new_chunk to sectors.
A straight-forward conversion which gets rid of some
multiplications/divisions/shifts. The patch also introduces a couple
of new ones, most of which are due to conf->chunk_size still being
represented in bytes. This will be cleaned up in subsequent patches.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index abcc0fef30e3..f996d8342a85 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -886,13 +886,13 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->delta_disks = sb->delta_disks;
mddev->new_level = sb->new_level;
mddev->new_layout = sb->new_layout;
- mddev->new_chunk = sb->new_chunk;
+ mddev->new_chunk_sectors = sb->new_chunk >> 9;
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
}
if (sb->state & (1<<MD_SB_CLEAN))
@@ -1007,7 +1007,7 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
sb->new_level = mddev->new_level;
sb->delta_disks = mddev->delta_disks;
sb->new_layout = mddev->new_layout;
- sb->new_chunk = mddev->new_chunk;
+ sb->new_chunk = mddev->new_chunk_sectors << 9;
}
mddev->minor_version = sb->minor_version;
if (mddev->in_sync)
@@ -1304,13 +1304,13 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->delta_disks = le32_to_cpu(sb->delta_disks);
mddev->new_level = le32_to_cpu(sb->new_level);
mddev->new_layout = le32_to_cpu(sb->new_layout);
- mddev->new_chunk = le32_to_cpu(sb->new_chunk)<<9;
+ mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
} else {
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
}
} else if (mddev->pers == NULL) {
@@ -1409,7 +1409,7 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
sb->new_layout = cpu_to_le32(mddev->new_layout);
sb->delta_disks = cpu_to_le32(mddev->delta_disks);
sb->new_level = cpu_to_le32(mddev->new_level);
- sb->new_chunk = cpu_to_le32(mddev->new_chunk>>9);
+ sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
}
max_dev = 0;
@@ -2753,7 +2753,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
if (IS_ERR(priv)) {
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->raid_disks -= mddev->delta_disks;
mddev->delta_disks = 0;
module_put(pers->owner);
@@ -2771,7 +2771,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
mddev->level = mddev->new_level;
mddev->layout = mddev->new_layout;
- mddev->chunk_sectors = mddev->new_chunk >> 9;
+ mddev->chunk_sectors = mddev->new_chunk_sectors;
mddev->delta_disks = 0;
pers->run(mddev);
mddev_resume(mddev);
@@ -2864,8 +2864,9 @@ static ssize_t
chunk_size_show(mddev_t *mddev, char *page)
{
if (mddev->reshape_position != MaxSector &&
- mddev->chunk_sectors << 9 != mddev->new_chunk)
- return sprintf(page, "%d (%d)\n", mddev->new_chunk,
+ mddev->chunk_sectors != mddev->new_chunk_sectors)
+ return sprintf(page, "%d (%d)\n",
+ mddev->new_chunk_sectors << 9,
mddev->chunk_sectors << 9);
return sprintf(page, "%d\n", mddev->chunk_sectors << 9);
}
@@ -2887,7 +2888,7 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
if (err)
return err;
} else {
- mddev->new_chunk = n;
+ mddev->new_chunk_sectors = n >> 9;
if (mddev->reshape_position == MaxSector)
mddev->chunk_sectors = n >> 9;
}
@@ -3665,7 +3666,7 @@ reshape_position_store(mddev_t *mddev, const char *buf, size_t len)
mddev->delta_disks = 0;
mddev->new_level = mddev->level;
mddev->new_layout = mddev->layout;
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
return len;
}
@@ -4414,7 +4415,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
mddev->delta_disks = 0;
mddev->new_level = LEVEL_NONE;
mddev->new_layout = 0;
- mddev->new_chunk = 0;
+ mddev->new_chunk_sectors = 0;
mddev->curr_resync = 0;
mddev->resync_mismatches = 0;
mddev->suspend_lo = mddev->suspend_hi = 0;
@@ -5083,7 +5084,7 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
get_random_bytes(mddev->uuid, 16);
mddev->new_level = mddev->level;
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->new_layout = mddev->layout;
mddev->delta_disks = 0;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 5d78830043d0..e0a2b8e3985d 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -166,7 +166,8 @@ struct mddev_s
* If reshape_position is MaxSector, then no reshape is happening (yet).
*/
sector_t reshape_position;
- int delta_disks, new_level, new_layout, new_chunk;
+ int delta_disks, new_level, new_layout;
+ int new_chunk_sectors;
struct mdk_thread_s *thread; /* management thread */
struct mdk_thread_s *sync_thread; /* doing resync or reconstruct */
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 388635735ae5..12f8f34f17ae 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2161,10 +2161,10 @@ static int raid1_reshape(mddev_t *mddev)
int d, d2, err;
/* Cannot change chunk_size, layout, or level */
- if (mddev->chunk_sectors << 9 != mddev->new_chunk ||
+ if (mddev->chunk_sectors != mddev->new_chunk_sectors ||
mddev->layout != mddev->new_layout ||
mddev->level != mddev->new_level) {
- mddev->new_chunk = mddev->chunk_sectors << 9;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->new_layout = mddev->layout;
mddev->new_level = mddev->level;
return -EINVAL;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 1e4fd5e8bfdd..bc3564cfbba0 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3358,8 +3358,8 @@ static int raid5_mergeable_bvec(struct request_queue *q,
if ((bvm->bi_rw & 1) == WRITE)
return biovec->bv_len; /* always allow writes to be mergeable */
- if (mddev->new_chunk < mddev->chunk_sectors << 9)
- chunk_sectors = mddev->new_chunk >> 9;
+ if (mddev->new_chunk_sectors < mddev->chunk_sectors)
+ chunk_sectors = mddev->new_chunk_sectors;
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
if (max < 0) max = 0;
if (max <= biovec->bv_len && bio_sectors == 0)
@@ -3375,8 +3375,8 @@ static int in_chunk_boundary(mddev_t *mddev, struct bio *bio)
unsigned int chunk_sectors = mddev->chunk_sectors;
unsigned int bio_sectors = bio->bi_size >> 9;
- if (mddev->new_chunk < mddev->chunk_sectors << 9)
- chunk_sectors = mddev->new_chunk >> 9;
+ if (mddev->new_chunk_sectors < mddev->chunk_sectors)
+ chunk_sectors = mddev->new_chunk_sectors;
return chunk_sectors >=
((sector & (chunk_sectors - 1)) + bio_sectors);
}
@@ -3791,8 +3791,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
* If old and new chunk sizes differ, we need to process the
* largest of these
*/
- if (mddev->new_chunk > mddev->chunk_sectors << 9)
- reshape_sectors = mddev->new_chunk / 512;
+ if (mddev->new_chunk_sectors > mddev->chunk_sectors)
+ reshape_sectors = mddev->new_chunk_sectors;
else
reshape_sectors = mddev->chunk_sectors;
@@ -4304,7 +4304,7 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
}
sectors &= ~((sector_t)mddev->chunk_sectors - 1);
- sectors &= ~((sector_t)mddev->new_chunk/512 - 1);
+ sectors &= ~((sector_t)mddev->new_chunk_sectors - 1);
return sectors * (raid_disks - conf->max_degraded);
}
@@ -4336,10 +4336,11 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
return ERR_PTR(-EINVAL);
}
- if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE ||
- !is_power_of_2(mddev->new_chunk)) {
+ if (!mddev->new_chunk_sectors ||
+ (mddev->new_chunk_sectors << 9) % PAGE_SIZE ||
+ !is_power_of_2(mddev->new_chunk_sectors)) {
printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- mddev->new_chunk, mdname(mddev));
+ mddev->new_chunk_sectors << 9, mdname(mddev));
return ERR_PTR(-EINVAL);
}
@@ -4402,7 +4403,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev)
conf->fullsync = 1;
}
- conf->chunk_size = mddev->new_chunk;
+ conf->chunk_size = mddev->new_chunk_sectors << 9;
conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
@@ -4476,7 +4477,7 @@ static int run(mddev_t *mddev)
* geometry.
*/
here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->new_chunk>>9)*
+ if (sector_div(here_new, mddev->new_chunk_sectors *
(mddev->raid_disks - max_degraded))) {
printk(KERN_ERR "raid5: reshape_position not "
"on a stripe boundary\n");
@@ -4499,7 +4500,7 @@ static int run(mddev_t *mddev)
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
- BUG_ON(mddev->chunk_sectors << 9 != mddev->new_chunk);
+ BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
@@ -4851,7 +4852,7 @@ static int raid5_check_reshape(mddev_t *mddev)
if (mddev->delta_disks == 0 &&
mddev->new_layout == mddev->layout &&
- mddev->new_chunk == mddev->chunk_sectors << 9)
+ mddev->new_chunk_sectors == mddev->chunk_sectors)
return -EINVAL; /* nothing to do */
if (mddev->bitmap)
/* Cannot grow a bitmap yet */
@@ -4881,9 +4882,11 @@ static int raid5_check_reshape(mddev_t *mddev)
*/
if (((mddev->chunk_sectors << 9) / STRIPE_SIZE) * 4
> conf->max_nr_stripes ||
- (mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
+ ((mddev->new_chunk_sectors << 9) / STRIPE_SIZE) * 4
+ > conf->max_nr_stripes) {
printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n",
- (max(mddev->chunk_sectors << 9, mddev->new_chunk)
+ (max(mddev->chunk_sectors << 9,
+ mddev->new_chunk_sectors << 9)
/ STRIPE_SIZE)*4);
return -ENOSPC;
}
@@ -4929,7 +4932,7 @@ static int raid5_start_reshape(mddev_t *mddev)
conf->previous_raid_disks = conf->raid_disks;
conf->raid_disks += mddev->delta_disks;
conf->prev_chunk = conf->chunk_size;
- conf->chunk_size = mddev->new_chunk;
+ conf->chunk_size = mddev->new_chunk_sectors << 9;
conf->prev_algo = conf->algorithm;
conf->algorithm = mddev->new_layout;
if (mddev->delta_disks < 0)
@@ -5114,7 +5117,7 @@ static void *raid5_takeover_raid1(mddev_t *mddev)
mddev->new_level = 5;
mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
- mddev->new_chunk = chunksect << 9;
+ mddev->new_chunk_sectors = chunksect;
return setup_conf(mddev);
}
@@ -5185,7 +5188,7 @@ static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
}
if (new_chunk > 0) {
conf->chunk_size = new_chunk;
- mddev->new_chunk = new_chunk;
+ mddev->new_chunk_sectors = new_chunk >> 9;
mddev->chunk_sectors = new_chunk >> 9;
}
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -5194,7 +5197,7 @@ static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
if (new_layout >= 0)
mddev->new_layout = new_layout;
if (new_chunk > 0)
- mddev->new_chunk = new_chunk;
+ mddev->new_chunk_sectors = new_chunk >> 9;
}
return 0;
}
@@ -5219,7 +5222,7 @@ static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
if (new_layout >= 0)
mddev->new_layout = new_layout;
if (new_chunk > 0)
- mddev->new_chunk = new_chunk;
+ mddev->new_chunk_sectors = new_chunk >> 9;
return 0;
}
]
|
| 503/2 |
2026/09/09 21:37 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 59444
output: 41
thoughts: 485
Thoughts: **Investigating the Root Cause**
Okay, so I've just verified that `664e7c413f1e9` only handles the sector conversion for `new_chunk`, and now I need to dive deeper into `91adb56473febeeb3ef657bb5147ddd355465700`. I need to figure out how this issue is happening. I need to understand this better.
Let's start by exploring related commits in the Git history. Hmm, let me check `drivers/md/md.c` specifically, and look around where `__md_stop`, `do_md_stop`, or `update_raid_disks` are touched. That might provide some context.
Wait a second. What commit introduced the `action_store()` function or, more specifically, the ability to start a reshape operation through sysfs? That's a good lead. I should search for commits in `drivers/md/` around March/April 2009. That timeframe could be relevant.
Okay, let's use `git log` with `PathPrefix: drivers/md/` and focus on that March/April 2009 period, around the time `91adb56473febeeb3ef657bb5147ddd355465700` was introduced. This should narrow things down significantly.
Now, let's also explore commits reachable from `91adb56473febeeb3ef657bb5147ddd355465700` itself. What commits came right after it? I should be able to find its children.
I'm thinking I can use `git-log` with either `CodeRegexp` or a message regexp. That should help me zero in on the changes. But, let me see if I can search commit messages for commits authored around Mar 31 2009... that might be fruitful.
Hmm, I wonder if a search for commits mentioning `91adb56473fe` directly will show anything, probably not. Okay, no problem. Let's see if I can get `git-log` to search based on date and author.
Alright! In `git-log`, I can use `MessageRegexps: ["raid5"]` or `MessageRegexps: ["reshape"]` to focus on relevant keywords. That's a solid strategy.
Finally, I should test if I can do a `SymbolName` search on `raid5_check_reshape` or `raid5_start_reshape`. That could be a direct line of investigation.
|
| 504/2 |
2026/09/09 21:37 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/raid5.c SymbolName:raid5_check_reshape]
Results: map[Output:2953079c692d md: separate flags for superblock changes
d1688a6d5515 md/raid5: typedef removal: raid5_conf_t -> struct r5conf
fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
50ac168a6e0a md: merge reconfig and check_reshape methods.
597a711b69cf md: remove unnecessary arguments from ->reconfig method.
0ba459d26260 md/raid5: Use is_power_of_2() in raid5_reconfig()/raid6_reconfig().
09c9e5fa1b93 md: convert conf->chunk_size and conf->prev_chunk to sectors.
664e7c413f1e md: Convert mddev->new_chunk to sectors.
9d8f0363623b md: Make mddev->chunk_size sector-based.
070ec55d0715 md: remove mddev_to_conf "helper" macro
]
|
| 505/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 60837
output: 41
thoughts: 60
Thoughts: Okay, let's dive into these commits.
**Diving into RAID5 Reshape Logic**
Right, so I'm looking at this commit, `070ec55d0715`, which seems to be cleaning up a macro, `mddev_to_conf`. Always good to see that kind of house cleaning. Gets rid of unnecessary "helper" macros, making the code a little cleaner. I like it.
Now, let's see, what were the earlier changes around `raid5_check_reshape`? Interesting... I wonder if we could pass `Count: 20` to that function. Let's see... what implications would that have on the logic? Does it make sense in the context of the larger reshaping process? How does that impact data integrity or performance? It is the kind of detail that is important for a long-lived project.
|
| 506/2 |
2026/09/09 21:38 |
tool |
git-log |
0m
Args: map[Count:25 SourcePath:drivers/md/raid5.c SymbolName:raid5_check_reshape]
Results: map[Output:2953079c692d md: separate flags for superblock changes
d1688a6d5515 md/raid5: typedef removal: raid5_conf_t -> struct r5conf
fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
50ac168a6e0a md: merge reconfig and check_reshape methods.
597a711b69cf md: remove unnecessary arguments from ->reconfig method.
0ba459d26260 md/raid5: Use is_power_of_2() in raid5_reconfig()/raid6_reconfig().
09c9e5fa1b93 md: convert conf->chunk_size and conf->prev_chunk to sectors.
664e7c413f1e md: Convert mddev->new_chunk to sectors.
9d8f0363623b md: Make mddev->chunk_size sector-based.
070ec55d0715 md: remove mddev_to_conf "helper" macro
88ce4930e2b8 md/raid5: allow layout and chunksize to be changed on active array.
b35460352778 md/raid5: allow layout/chunksize to be changed on an active 2-drive raid5.
]
|
| 507/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 61472
output: 26
thoughts: 52
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**Initial Assessment and Targeted Investigation**
Alright, let's zero in on `88ce4930e2b8` and `b35460352778`. Those seem like the key areas to start with. Given my experience, I'd immediately focus on `88ce4930e2b8` first. My immediate instinct is to dissect that one and examine its ancestry. I want to see what its parents are and how it's connected within the larger structure. This approach allows for a deeper and more informed analysis right from the get go.
|
| 508/2 |
2026/09/09 21:38 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 88ce4930e2b80378d45506ce2c3bb5820e156e85
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 15:24:23 2009 +1100
md/raid5: allow layout and chunksize to be changed on active array.
If an array has 3 or more devices, we allow the chunksize or layout
to be changed and when a reshape starts, we use these as the 'new'
values.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f7fb2b87ad89..4fdc6d02b447 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4397,9 +4397,7 @@ static int run(mddev_t *mddev)
int old_disks;
int max_degraded = (mddev->level == 6 ? 2 : 1);
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
+ if (mddev->new_level != mddev->level) {
printk(KERN_ERR "raid5: %s: unsupported reshape "
"required - aborting.\n",
mdname(mddev));
@@ -4784,8 +4782,10 @@ static int raid5_check_reshape(mddev_t *mddev)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
- if (mddev->delta_disks == 0)
- return 0; /* nothing to do */
+ if (mddev->delta_disks == 0 &&
+ mddev->new_layout == mddev->layout &&
+ mddev->new_chunk == mddev->chunk_size)
+ return -EINVAL; /* nothing to do */
if (mddev->bitmap)
/* Cannot grow a bitmap yet */
return -EBUSY;
@@ -4860,6 +4860,10 @@ static int raid5_start_reshape(mddev_t *mddev)
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
conf->raid_disks += mddev->delta_disks;
+ conf->prev_chunk = conf->chunk_size;
+ conf->chunk_size = mddev->new_chunk;
+ conf->prev_algo = conf->algorithm;
+ conf->algorithm = mddev->new_layout;
if (mddev->delta_disks < 0)
conf->reshape_progress = raid5_size(mddev, 0, 0);
else
@@ -4952,6 +4956,7 @@ static void end_reshape(raid5_conf_t *conf)
static void raid5_finish_reshape(mddev_t *mddev)
{
struct block_device *bdev;
+ raid5_conf_t *conf = mddev_to_conf(mddev);
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -4970,7 +4975,6 @@ static void raid5_finish_reshape(mddev_t *mddev)
}
} else {
int d;
- raid5_conf_t *conf = mddev_to_conf(mddev);
mddev->degraded = conf->raid_disks;
for (d = 0; d < conf->raid_disks ; d++)
if (conf->disks[d].rdev &&
@@ -4982,6 +4986,8 @@ static void raid5_finish_reshape(mddev_t *mddev)
d++)
raid5_remove_disk(mddev, d);
}
+ mddev->layout = conf->algorithm;
+ mddev->chunk_size = conf->chunk_size;
mddev->reshape_position = MaxSector;
mddev->delta_disks = 0;
}
@@ -5080,11 +5086,10 @@ static void *raid5_takeover_raid6(mddev_t *mddev)
static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
{
- /* Currently the layout and chunk size can only be changed
- * for a 2-drive raid array, as in that case no data shuffling
- * is required.
- * Later we might validate these and set new_* so a reshape
- * can complete the change.
+ /* For a 2-drive array, the layout and chunk size can be changed
+ * immediately as not restriping is needed.
+ * For larger arrays we record the new value - after validation
+ * to be used by a reshape pass.
*/
raid5_conf_t *conf = mddev_to_conf(mddev);
@@ -5103,19 +5108,49 @@ static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
/* They look valid */
- if (mddev->raid_disks != 2)
- return -EINVAL;
+ if (mddev->raid_disks == 2) {
- if (new_layout >= 0) {
- conf->algorithm = new_layout;
- mddev->layout = mddev->new_layout = new_layout;
+ if (new_layout >= 0) {
+ conf->algorithm = new_layout;
+ mddev->layout = mddev->new_layout = new_layout;
+ }
+ if (new_chunk > 0) {
+ conf->chunk_size = new_chunk;
+ mddev->chunk_size = mddev->new_chunk = new_chunk;
+ }
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
+ md_wakeup_thread(mddev->thread);
+ } else {
+ if (new_layout >= 0)
+ mddev->new_layout = new_layout;
+ if (new_chunk > 0)
+ mddev->new_chunk = new_chunk;
}
+ return 0;
+}
+
+static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
+{
+ if (new_layout >= 0 && !algorithm_valid_raid6(new_layout))
+ return -EINVAL;
if (new_chunk > 0) {
- conf->chunk_size = new_chunk;
- mddev->chunk_size = mddev->new_chunk = new_chunk;
+ if (new_chunk & (new_chunk-1))
+ /* not a power of 2 */
+ return -EINVAL;
+ if (new_chunk < PAGE_SIZE)
+ return -EINVAL;
+ if (mddev->array_sectors & ((new_chunk>>9)-1))
+ /* not factor of array size */
+ return -EINVAL;
}
- set_bit(MD_CHANGE_DEVS, &mddev->flags);
- md_wakeup_thread(mddev->thread);
+
+ /* They look valid */
+
+ if (new_layout >= 0)
+ mddev->new_layout = new_layout;
+ if (new_chunk > 0)
+ mddev->new_chunk = new_chunk;
+
return 0;
}
@@ -5216,6 +5251,7 @@ static struct mdk_personality raid6_personality =
#endif
.quiesce = raid5_quiesce,
.takeover = raid6_takeover,
+ .reconfig = raid6_reconfig,
};
static struct mdk_personality raid5_personality =
{
]
|
| 509/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 63844
output: 37
thoughts: 2812
Thoughts: **Deep Dive into a RAID5 Reshape Bug**
Okay, so I'm digging into this RAID5 reshape issue, and it's a bit of a rabbit hole, but I'm getting a handle on it. Let's start with the basics. Commit `88ce4930e2b8` allows changes to layout and chunk size on an active array. That's fine in itself; it sets `mddev->new_layout` or `mddev->new_chunk` but leaves the originals untouched and sets `reshape_position` to `MaxSector`. So far, so good, but then I'm immediately thinking, what happens if the array is stopped when it's *inactive*? We know that if it was, `mddev->new_layout` or `mddev->new_chunk` won't match the original `mddev->layout` and `mddev->chunk_size`. This triggers a `BUG_ON` later in the code, which is what we need to trace back.
I'm seeing that the bug description states this fix makes it safe to modify disks, level, layout, or chunk_size while the array is active, then stops the array *before* the reshape begins. It's supposed to discard these changes, but I can see that's not what is happening.
The `__md_stop()` function is supposed to discard changes, but clearly it is not. Let's see what is does: if there is no reshape in progress (`reshape_position == MaxSector`), it zeroes some values so any reshape is discarded. This would have worked if `delta_disks`, `new_layout`, or `new_chunk_sectors` had the right values to begin with!
So, I need to get to the root of that `BUG_ON`. I trace it to commit `91adb56473febeeb3ef657bb5147ddd355465700`, which refactors the "run" function. Hang on, wasn't there another `BUG_ON` related to `mddev->delta_disks`? That's what I am most interested in! I have to backtrack a bit.
Okay, I've got it. The `mddev->delta_disks` `BUG_ON` *also* showed up in that same commit, and that's the one that is causing the problem in my test case. Before that commit, *nothing* prevented the array from starting up normally, even if `mddev->delta_disks` was not zero. It seems before the "fix", we did not have these checks. The array would just "run" even if the state was inconsistent!
Now, the "delta_disks != 0" thing is key. I'm remembering that `update_raid_disks()`, added in 2006 (commit `63c70c4f3a30e77e6f445bd16eff7934a031ebd3`), sets `mddev->delta_disks`. That's how it gets set! Then, when you write `"inactive"` to the `array_state` sysfs attribute (added in 2006, `9e653b6342c94016f5cc9937061ef99e9c4b4045`), `do_md_stop()` stops the array. And it does not clear `delta_disks`! Then, when you write `"active"` to `array_state`, `do_md_run()` starts the array back up and calls the "run" method!
So, the issue is this sequence: `update_raid_disks()` -> `delta_disks` is set -> array inactive -> `delta_disks` is NOT cleared -> array active, with an inconsistent value.
Let's see: `91adb56473febeeb3ef657bb5147ddd355465700` is the culprit because it *added* the `BUG_ON` that exposes the flaw.
But what about the commits right before?
There's commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`, with the title "md: make sure new_level, new_chunksize, new_layout always have sensible values." Now I see! It sounds like Neil Brown realized there was a consistency issue with `new_*` values, especially with sysfs. His comment states that these should have consistent values in the
|
| 510/2 |
2026/09/09 21:38 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:action_store]
Results: map[Output:798d79a7e4b0 md: suspend array when sync_action=reshape
5ce10a38590c md: don't fail action_store() if sync_thread is not registered
c8ecfe680c37 md: replace sysfs api sync_action with new helpers
207c5656c33d md: factor out helper to start reshape from action_store()
81e2ce1b3d5a md: delay remove_and_add_spares() for read only array to md_start_sync()
64e5e09afc14 md: refactor action_store() for 'idle' and 'frozen'
a865b96c513b Revert "md: unlock mddev before reap sync_thread in action_store"
873f50ece41a md: fix data corruption for raid456 when reshape restart while grow up
f97a5528b21e md: introduce md_ro_state
9dfbdafda3b3 md: unlock mddev before reap sync_thread in action_store
]
|
| 511/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 67997
output: 25
thoughts: 37
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and presented as if it's my own internal monologue:
**Investigative Spark**
Hold on a second. My Spidey-sense is tingling. That identifier, `873f50ece41a`, just popped up and it's grabbing my attention. Something about it doesn't quite sit right with me. I've got to investigate this. What *is* `873f50ece41a`? I need to immediately delve into that. Let's see what that thing is. Time to dig in and find out.
|
| 512/2 |
2026/09/09 21:38 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 873f50ece41aad5c4f788a340960c53774b5526e
Author: Yu Kuai <yukuai3@huawei.com>
Date: Fri May 12 09:56:07 2023 +0800
md: fix data corruption for raid456 when reshape restart while grow up
Currently, if reshape is interrupted, echo "reshape" to sync_action will
restart reshape from scratch, for example:
echo frozen > sync_action
echo reshape > sync_action
This will corrupt data before reshape_position if the array is growing,
fix the problem by continue reshape from reshape_position.
Reported-by: Peter Neuwirth <reddunur@online.de>
Link: https://lore.kernel.org/linux-raid/e2f96772-bfbc-f43b-6da1-f520e5164536@online.de/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-3-yukuai1@huaweicloud.com
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ca0de7ddd943..b7f83784710b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4806,11 +4806,21 @@ action_store(struct mddev *mddev, const char *page, size_t len)
return -EINVAL;
err = mddev_lock(mddev);
if (!err) {
- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
err = -EBUSY;
- else {
+ } else if (mddev->reshape_position == MaxSector ||
+ mddev->pers->check_reshape == NULL ||
+ mddev->pers->check_reshape(mddev)) {
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
err = mddev->pers->start_reshape(mddev);
+ } else {
+ /*
+ * If reshape is still in progress, and
+ * md_check_recovery() can continue to reshape,
+ * don't restart reshape because data can be
+ * corrupted for raid456.
+ */
+ clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
mddev_unlock(mddev);
}
]
|
| 513/2 |
2026/09/09 21:38 |
llm |
fixes-finder-compressor |
0m
Model:
Reply: ### Summary of Investigation
#### 1. Approaches Tried and Results
- Traced the history of `raid5_run()` (formerly `run()`) in `drivers/md/raid5.c`:
- `run()` was renamed to `raid5_run()` by commit `849674e4fb175e47b7504249f7367367b18fe6a1` ("MD: rename some functions", Jan 2016).
- Traced the introduction of the assertion `BUG_ON(mddev->delta_disks != 0)` in `run()`:
- Introduced in commit `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"", Tue Mar 31 14:39:39 2009 +1100).
- Before commit `91adb56473feb`, if `mddev->reshape_position == MaxSector`, `run()` executed:
```c
if (mddev->reshape_position == MaxSector) {
conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
} else {
conf->raid_disks = mddev->raid_disks;
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
}
```
It did not crash or assert if `delta_disks != 0`; it simply used `mddev->raid_disks`.
- Commit `91adb56473febeeb3ef657bb5147ddd355465700` added:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_size != mddev->new_chunk);
BUG_ON(mddev->delta_disks != 0);
}
```
- Directly preceding commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` ("md: make sure new_level, new_chunksize, new_layout always have sensible values.", Mar 31, 2009):
NeilBrown explained:
> "When an md array is undergoing a change, we have new_* fields that show the new values.
> When no change is happening, it is least confusing if these have the same value as the normal fields.
> This is true in most cases, but not when the values are set via sysfs.
> So fix this up.
> A subsequent patch will BUG_ON if these things aren't consistent."
In `34817e8c3948`, `layout_store` and `chunk_size_store` were updated to keep `new_*` aligned, but `delta_disks` was NOT updated, nor was stopping an array in `inactive` state handled.
- Traced the origin of `__md_stop()` and stopping logic:
- In commit `9e653b6342c94016f5cc9937061ef99e9c4b4045` ("md: Set/get state of array via sysfs", Jun 2006):
Introduced `mode == 2` ("inactive") in `do_md_stop()`, which stopped and detached personality without zeroing array attributes (`delta_disks` wasn't even cleared in `mode == 0` back then).
- In commit `63c70c4f3a30e77e6f445bd16eff7934a031ebd3` ("md: Split reshape handler in check_reshape and start_reshape", Mar 2006):
Introduced `mddev->delta_disks = raid_disks - mddev->raid_disks;` in `update_raid_disks()`.
- In commit `6177b472ab14e1ac88896960370dd54ba577d926` ("md: start to refactor do_md_stop", Mar 2010):
Factored out `md_clean()` (which clears `delta_disks` among other attributes in `mode == 0`) and `md_stop()` (for personality teardown).
- In commit `5eff3c439d3478ba9e8ba5f8c0aaf6e6fadb6e58` ("md: make sure everything is freed when dm-raid stops an array", Nov 2012):
Renamed `md_stop()` to `__md_stop()` and added a wrapper `md_stop()` for dm-raid.
#### 2. Current Hypotheses / Theories
- **Candidate 1: `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"")**
- Explicitly introduced the failing `BUG_ON(mddev->delta_disks != 0)` assertion that triggers the crash when starting an array that has `mddev->reshape_position == MaxSector` and `mddev->delta_disks != 0`.
- Prior to this commit, having `delta_disks != 0` when `reshape_position == MaxSector` was harmless and did not crash because `run()` ignored `delta_disks` when `reshape_position == MaxSector`.
- The commit author assumed `delta_disks` would always be 0 if no reshape is running, but failed to account for unstarted reshapes left pending when an array is stopped (`inactive`).
- **Candidate 2: `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` ("md: make sure new_level, new_chunksize, new_layout always have sensible values.")**
- Preceding patch in the series where NeilBrown set up the invariant for `new_*` values, directly stating "A subsequent patch will BUG_ON if these things aren't consistent", but this commit did not touch `delta_disks` or add the `BUG_ON`.
#### 3. Critical Code & Structural References
- Crashing assertion (`drivers/md/raid5.c:8117`):
```c
if (mddev->reshape_position != MaxSector) {
...
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // Crashes here
}
```
- The fixing patch:
```c
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
#### 4. Watch-outs & Notes for Next Steps
- Avoid generic `git-log` queries without parent references or commit bounds; `Since: "17 years"` encompasses too much history.
- Check commits following `91adb56473feb` to verify if any later commit introduced reshape start / abort mechanisms or changed `delta_disks` semantics, or if `91adb56473feb` is definitely the commit that introduced the bug.
Tokens:
input: 51322
output: 2050
thoughts: 0
|
| 514/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 30837
output: 44
thoughts: 47
Thoughts: Okay, here's my thought process on this, from my perspective:
**Investigating the `delta_disks` Variable**
Alright, time to dive into this `delta_disks` issue. First things first, I need to understand how this variable, whether it's accessed as `mddev->delta_disks` or just plain `delta_disks`, is being initialized and modified. Specifically, I need to pinpoint where it gets set and, critically, where and when it gets cleared or reset. Knowing the lifecycle of this variable is fundamental to understanding any potential problems. To do this comprehensively, I'll need to conduct a thorough search. I'm going to scan the entire codebase and look for all instances of `mddev->delta_disks` and just plain `delta_disks`. The goal is to get a full picture of its usage and discover if there are any potential usage patterns I hadn't considered.
|
| 515/2 |
2026/09/09 21:38 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:2 Name:mddev::delta_disks]
Results: map[References:[map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:analyze_sbs SourceFile:drivers/md/md.c SourceLine:3945 SourceSnippet:3943: }
3944: }
3945: if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks)) &&
3946: !test_bit(Journal, &rdev->flags)) {
3947: rdev->raid_disk = -1;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8592 SourceSnippet:8590: if (raid5_has_log(conf) || raid5_has_ppl(conf))
8591: return -EINVAL;
8592: if (mddev->delta_disks == 0 &&
8593: mddev->new_layout == mddev->layout &&
8594: mddev->new_chunk_sectors == mddev->chunk_sectors)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8600 SourceSnippet:8598: if (!mddev->new_chunk_sectors)
8599: return -EINVAL;
8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
8601: /* We might be able to shrink, but the devices must
8602: * be made bigger first.
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8609 SourceSnippet:8607: if (mddev->level == 6)
8608: min = 4;
8609: if (mddev->raid_disks + mddev->delta_disks < min)
8610: return -EINVAL;
8611: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8620 SourceSnippet:8618: return -EOPNOTSUPP;
8619: if (mddev->new_chunk_sectors > mddev->chunk_sectors ||
8620: mddev->delta_disks > 0)
8621: if (resize_chunks(conf,
8622: conf->previous_raid_disks
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8623 SourceSnippet:8621: if (resize_chunks(conf,
8622: conf->previous_raid_disks
8623: + max(0, mddev->delta_disks),
8624: max(mddev->new_chunk_sectors,
8625: mddev->chunk_sectors)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8629 SourceSnippet:8627: return -ENOMEM;
8628:
8629: if (conf->previous_raid_disks + mddev->delta_disks <= conf->pool_size)
8630: return 0; /* never bother to shrink */
8631: return resize_stripes(conf, (conf->previous_raid_disks
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:check_reshape SourceFile:drivers/md/raid5.c SourceLine:8632 SourceSnippet:8630: return 0; /* never bother to shrink */
8631: return resize_stripes(conf, (conf->previous_raid_disks
8632: + mddev->delta_disks));
8633: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:do_table_event SourceFile:drivers/md/dm-raid.c SourceLine:1724 SourceSnippet:1722: if (!rs_is_reshaping(rs) &&
1723: rs->array_sectors > rs->md.array_sectors &&
1724: !rs->md.delta_disks &&
1725: rs->md.raid_disks == rs->raid_disks) {
1726: /* The raid10 personality doesn't provide proper device sizes -> correct. */
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:level_store SourceFile:drivers/md/md.c SourceLine:4139 SourceSnippet:4137: mddev->new_layout = mddev->layout;
4138: mddev->new_chunk_sectors = mddev->chunk_sectors;
4139: mddev->raid_disks -= mddev->delta_disks;
4140: mddev->delta_disks = 0;
4141: mddev->reshape_backwards = 0;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:level_store SourceFile:drivers/md/md.c SourceLine:4140 SourceSnippet:4138: mddev->new_chunk_sectors = mddev->chunk_sectors;
4139: mddev->raid_disks -= mddev->delta_disks;
4140: mddev->delta_disks = 0;
4141: mddev->reshape_backwards = 0;
4142: put_pers(pers);
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:level_store SourceFile:drivers/md/md.c SourceLine:4161 SourceSnippet:4159: mddev->layout = mddev->new_layout;
4160: mddev->chunk_sectors = mddev->new_chunk_sectors;
4161: mddev->delta_disks = 0;
4162: mddev->reshape_backwards = 0;
4163: mddev->degraded = 0;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:md_clean SourceFile:drivers/md/md.c SourceLine:7007 SourceSnippet:7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:md_finish_sync SourceFile:drivers/md/md.c SourceLine:9696 SourceSnippet:9694: rcu_read_lock();
9695: rdev_for_each_rcu(rdev, mddev)
9696: if (mddev->delta_disks >= 0 &&
9697: rdev_needs_recovery(rdev, mddev->curr_resync))
9698: rdev->recovery_offset = mddev->curr_resync;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:md_finish_sync SourceFile:drivers/md/md.c SourceLine:9703 SourceSnippet:9701: case ACTION_RESHAPE:
9702: if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
9703: mddev->delta_disks > 0 &&
9704: mddev->pers->finish_reshape &&
9705: mddev->pers->size &&
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:md_set_array_info SourceFile:drivers/md/md.c SourceLine:7975 SourceSnippet:7973: mddev->new_chunk_sectors = mddev->chunk_sectors;
7974: mddev->new_layout = mddev->layout;
7975: mddev->delta_disks = 0;
7976: mddev->reshape_backwards = 0;
7977:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:md_update_sb SourceFile:drivers/md/md.c SourceLine:2837 SourceSnippet:2835: rdev_for_each(rdev, mddev) {
2836: if (rdev->raid_disk >= 0 &&
2837: mddev->delta_disks >= 0 &&
2838: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
2839: test_bit(MD_RECOVERY_RECOVER, &mddev->recovery) &&
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid0_takeover_raid1 SourceFile:drivers/md/raid0.c SourceLine:758 SourceSnippet: 756: mddev->new_chunk_sectors = chunksect;
757: mddev->chunk_sectors = chunksect;
758: mddev->delta_disks = 1 - mddev->raid_disks;
759: mddev->raid_disks = 1;
760: /* make sure it will be not marked as dirty */
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid0_takeover_raid10 SourceFile:drivers/md/raid0.c SourceLine:714 SourceSnippet: 712: mddev->new_layout = 0;
713: mddev->new_chunk_sectors = mddev->chunk_sectors;
714: mddev->delta_disks = - mddev->raid_disks / 2;
715: mddev->raid_disks += mddev->delta_disks;
716: mddev->degraded = 0;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid0_takeover_raid10 SourceFile:drivers/md/raid0.c SourceLine:715 SourceSnippet: 713: mddev->new_chunk_sectors = mddev->chunk_sectors;
714: mddev->delta_disks = - mddev->raid_disks / 2;
715: mddev->raid_disks += mddev->delta_disks;
716: mddev->degraded = 0;
717: /* make sure it will be not marked as dirty */
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid0_takeover_raid45 SourceFile:drivers/md/raid0.c SourceLine:673 SourceSnippet: 671: mddev->new_chunk_sectors = mddev->chunk_sectors;
672: mddev->raid_disks--;
673: mddev->delta_disks = -1;
674: /* make sure it will be not marked as dirty */
675: mddev->resync_offset = MaxSector;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_check_reshape SourceFile:drivers/md/raid10.c SourceLine:4279 SourceSnippet:4277: kfree(conf->mirrors_new);
4278: conf->mirrors_new = NULL;
4279: if (mddev->delta_disks > 0) {
4280: /* allocate new 'mirrors' list */
4281: conf->mirrors_new =
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_check_reshape SourceFile:drivers/md/raid10.c SourceLine:4282 SourceSnippet:4280: /* allocate new 'mirrors' list */
4281: conf->mirrors_new =
4282: kzalloc_objs(struct raid10_info,
4283: mddev->raid_disks + mddev->delta_disks);
4284: if (!conf->mirrors_new)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_finish_reshape SourceFile:drivers/md/raid10.c SourceLine:5056 SourceSnippet:5054: mddev->bitmap_ops->reshape_finish(mddev);
5055:
5056: if (mddev->delta_disks > 0) {
5057: if (mddev->resync_offset > mddev->resync_max_sectors) {
5058: mddev->resync_offset = mddev->resync_max_sectors;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_finish_reshape SourceFile:drivers/md/raid10.c SourceLine:5065 SourceSnippet:5063: int d;
5064: for (d = conf->geo.raid_disks ;
5065: d < conf->geo.raid_disks - mddev->delta_disks;
5066: d++) {
5067: struct md_rdev *rdev = conf->mirrors[d].rdev;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid10_finish_reshape SourceFile:drivers/md/raid10.c SourceLine:5078 SourceSnippet:5076: mddev->chunk_sectors = 1 << conf->geo.chunk_shift;
5077: mddev->reshape_position = MaxSector;
5078: mddev->delta_disks = 0;
5079: mddev->reshape_backwards = 0;
5080: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_start_reshape SourceFile:drivers/md/raid10.c SourceLine:4404 SourceSnippet:4402: return -EINVAL;
4403:
4404: if (spares < mddev->delta_disks)
4405: return -EINVAL;
4406:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_start_reshape SourceFile:drivers/md/raid10.c SourceLine:4408 SourceSnippet:4406:
4407: conf->offset_diff = min_offset_diff;
4408: if (mddev->delta_disks > 0) {
4409: new_pool = create_r10bio_pool(new.raid_disks);
4410: if (!new_pool)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_start_reshape SourceFile:drivers/md/raid10.c SourceLine:4440 SourceSnippet:4438: spin_unlock_irq(&conf->device_lock);
4439:
4440: if (mddev->delta_disks && mddev->bitmap) {
4441: struct mdp_superblock_1 *sb = NULL;
4442: sector_t oldsize, newsize;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid10_start_reshape SourceFile:drivers/md/raid10.c SourceLine:4483 SourceSnippet:4481: }
4482: out:
4483: if (mddev->delta_disks > 0) {
4484: rdev_for_each(rdev, mddev)
4485: if (rdev->raid_disk < 0 &&
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid10_takeover_raid0 SourceFile:drivers/md/raid10.c SourceLine:4197 SourceSnippet:4195: mddev->new_layout = (1<<8) + 2;
4196: mddev->new_chunk_sectors = mddev->chunk_sectors;
4197: mddev->delta_disks = mddev->raid_disks;
4198: mddev->raid_disks *= 2;
4199: /* make sure it will be not marked as dirty */
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid1_reshape SourceFile:drivers/md/raid1.c SourceLine:3349 SourceSnippet:3347: md_allow_write(mddev);
3348:
3349: raid_disks = mddev->raid_disks + mddev->delta_disks;
3350:
3351: if (raid_disks < conf->raid_disks) {
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid1_reshape SourceFile:drivers/md/raid1.c SourceLine:3399 SourceSnippet:3397: spin_unlock_irqrestore(&conf->device_lock, flags);
3398: conf->raid_disks = mddev->raid_disks = raid_disks;
3399: mddev->delta_disks = 0;
3400:
3401: unfreeze_array(conf);
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid45_takeover_raid0 SourceFile:drivers/md/raid5.c SourceLine:8902 SourceSnippet:8900: mddev->new_chunk_sectors = mddev->chunk_sectors;
8901: mddev->raid_disks += 1;
8902: mddev->delta_disks = 1;
8903: /* make sure it will be not marked as dirty */
8904: mddev->resync_offset = MaxSector;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_finish_reshape SourceFile:drivers/md/raid5.c SourceLine:8824 SourceSnippet:8822: }
8823:
8824: if (mddev->delta_disks <= 0) {
8825: int d;
8826: spin_lock_irq(&conf->device_lock);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_finish_reshape SourceFile:drivers/md/raid5.c SourceLine:8830 SourceSnippet:8828: spin_unlock_irq(&conf->device_lock);
8829: for (d = conf->raid_disks ;
8830: d < conf->raid_disks - mddev->delta_disks;
8831: d++) {
8832: rdev = conf->disks[d].rdev;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid5_finish_reshape SourceFile:drivers/md/raid5.c SourceLine:8843 SourceSnippet:8841: mddev->chunk_sectors = conf->chunk_sectors;
8842: mddev->reshape_position = MaxSector;
8843: mddev->delta_disks = 0;
8844: mddev->reshape_backwards = 0;
8845: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_run SourceFile:drivers/md/raid5.c SourceLine:8063 SourceSnippet:8061: return -EINVAL;
8062: }
8063: old_disks = mddev->raid_disks - mddev->delta_disks;
8064: /* reshape_position must be on a new-stripe boundary, and one
8065: * further up in new geometry must map after here in old
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_run SourceFile:drivers/md/raid5.c SourceLine:8085 SourceSnippet:8083: /* here_old is the first stripe that we might need to read
8084: * from */
8085: if (mddev->delta_disks == 0) {
8086: /* We cannot be sure it is safe to start an in-place
8087: * reshape. It is only safe if user-space is monitoring
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_run SourceFile:drivers/md/raid5.c SourceLine:8117 SourceSnippet:8115: BUG_ON(mddev->layout != mddev->new_layout);
8116: BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
8117: BUG_ON(mddev->delta_disks != 0);
8118: }
8119:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_start_reshape SourceFile:drivers/md/raid5.c SourceLine:8668 SourceSnippet:8666: }
8667:
8668: if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
8669: /* Not enough devices even to make a degraded array
8670: * of that size
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_start_reshape SourceFile:drivers/md/raid5.c SourceLine:8678 SourceSnippet:8676: * attribute.
8677: */
8678: if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
8679: < mddev->array_sectors) {
8680: pr_warn("md/raid:%s: array size must be reduced before number of disks\n",
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_start_reshape SourceFile:drivers/md/raid5.c SourceLine:8695 SourceSnippet:8693: write_seqcount_begin(&conf->gen_lock);
8694: conf->previous_raid_disks = conf->raid_disks;
8695: conf->raid_disks += mddev->delta_disks;
8696: conf->prev_chunk_sectors = conf->chunk_sectors;
8697: conf->chunk_sectors = mddev->new_chunk_sectors;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid5_start_reshape SourceFile:drivers/md/raid5.c SourceLine:8727 SourceSnippet:8725: * such devices during the reshape and confusion could result.
8726: */
8727: if (mddev->delta_disks >= 0) {
8728: rdev_for_each(rdev, mddev)
8729: if (rdev->raid_disk < 0 &&
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid5_takeover_raid6 SourceFile:drivers/md/raid5.c SourceLine:8969 SourceSnippet:8967: mddev->new_level = 5;
8968: mddev->new_layout = new_layout;
8969: mddev->delta_disks = -1;
8970: mddev->raid_disks -= 1;
8971: return setup_conf(mddev);
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid6_takeover SourceFile:drivers/md/raid5.c SourceLine:9117 SourceSnippet:9115: mddev->new_level = 6;
9116: mddev->new_layout = new_layout;
9117: mddev->delta_disks = 1;
9118: mddev->raid_disks += 1;
9119: return setup_conf(mddev);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_disks_show SourceFile:drivers/md/md.c SourceLine:4408 SourceSnippet:4406: return 0;
4407: if (mddev->reshape_position != MaxSector &&
4408: mddev->delta_disks != 0)
4409: return sprintf(page, "%d (%d)\n", mddev->raid_disks,
4410: mddev->raid_disks - mddev->delta_disks);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_disks_show SourceFile:drivers/md/md.c SourceLine:4410 SourceSnippet:4408: mddev->delta_disks != 0)
4409: return sprintf(page, "%d (%d)\n", mddev->raid_disks,
4410: mddev->raid_disks - mddev->delta_disks);
4411: return sprintf(page, "%d\n", mddev->raid_disks);
4412: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_disks_store SourceFile:drivers/md/md.c SourceLine:4436 SourceSnippet:4434: } else if (mddev->reshape_position != MaxSector) {
4435: struct md_rdev *rdev;
4436: int olddisks = mddev->raid_disks - mddev->delta_disks;
4437:
4438: err = -EINVAL;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid_disks_store SourceFile:drivers/md/md.c SourceLine:4448 SourceSnippet:4446: }
4447: err = 0;
4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_disks_store SourceFile:drivers/md/md.c SourceLine:4450 SourceSnippet:4448: mddev->delta_disks = n - olddisks;
4449: mddev->raid_disks = n;
4450: mddev->reshape_backwards = (mddev->delta_disks < 0);
4451: } else
4452: mddev->raid_disks = n;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_resume SourceFile:drivers/md/dm-raid.c SourceLine:4135 SourceSnippet:4133: if (test_and_clear_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) {
4134: /* Only reduce raid set size before running a disk removing reshape. */
4135: if (mddev->delta_disks < 0)
4136: rs_set_capacity(rs);
4137:
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:raid_set_alloc SourceFile:drivers/md/dm-raid.c SourceLine:770 SourceSnippet: 768: rs->md.layout = raid_type->algorithm;
769: rs->md.new_layout = rs->md.layout;
770: rs->md.delta_disks = 0;
771: rs->md.resync_offset = MaxSector;
772:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:raid_status SourceFile:drivers/md/dm-raid.c SourceLine:3675 SourceSnippet:3673: raid10_md_layout_to_format(mddev->layout));
3674: if (test_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags))
3675: DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_DELTA_DISKS),
3676: max(rs->delta_disks, mddev->delta_disks));
3677: if (test_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags))
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:reshape_direction_store SourceFile:drivers/md/md.c SourceLine:5782 SourceSnippet:5780: return err;
5781: /* check if we are allowed to change */
5782: if (mddev->delta_disks)
5783: err = -EBUSY;
5784: else if (mddev->persistent &&
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:reshape_position_store SourceFile:drivers/md/md.c SourceLine:5739 SourceSnippet:5737: goto unlock;
5738: mddev->reshape_position = new;
5739: mddev->delta_disks = 0;
5740: mddev->reshape_backwards = 0;
5741: mddev->new_level = mddev->level;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:rs_check_takeover SourceFile:drivers/md/dm-raid.c SourceLine:1791 SourceSnippet:1789: !(mddev->raid_disks % near_copies)) {
1790: mddev->raid_disks /= near_copies;
1791: mddev->delta_disks = mddev->raid_disks;
1792: return 0;
1793: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:rs_is_layout_change SourceFile:drivers/md/dm-raid.c SourceLine:1906 SourceSnippet:1904: static bool rs_is_layout_change(struct raid_set *rs, bool use_mddev)
1905: {
1906: return (use_mddev ? rs->md.delta_disks : rs->delta_disks) ||
1907: rs->md.new_layout != rs->md.layout ||
1908: rs->md.new_chunk_sectors != rs->md.chunk_sectors;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:rs_reset_inconclusive_reshape SourceFile:drivers/md/dm-raid.c SourceLine:2961 SourceSnippet:2959: if (!rs_is_reshaping(rs) && rs_is_layout_change(rs, true)) {
2960: rs_set_cur(rs);
2961: rs->md.delta_disks = 0;
2962: rs->md.reshape_backwards = 0;
2963: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:rs_set_dev_and_array_sectors SourceFile:drivers/md/dm-raid.c SourceLine:1651 SourceSnippet:1649:
1650: if (use_mddev) {
1651: delta_disks = mddev->delta_disks;
1652: data_stripes = mddev_data_stripes(rs);
1653: } else {
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:rs_set_new SourceFile:drivers/md/dm-raid.c SourceLine:733 SourceSnippet: 731: mddev->chunk_sectors = mddev->new_chunk_sectors;
732: mddev->raid_disks = rs->raid_disks;
733: mddev->delta_disks = 0;
734: }
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:rs_setup_reshape SourceFile:drivers/md/dm-raid.c SourceLine:2857 SourceSnippet:2855: struct md_rdev *rdev;
2856:
2857: mddev->delta_disks = rs->delta_disks;
2858: cur_raid_devs = mddev->raid_disks;
2859:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:rs_setup_reshape SourceFile:drivers/md/dm-raid.c SourceLine:2861 SourceSnippet:2859:
2860: /* Ignore impossible layout change whilst adding/removing disks */
2861: if (mddev->delta_disks &&
2862: mddev->layout != mddev->new_layout) {
2863: DMINFO("Ignoring invalid layout change with delta_disks=%d", rs->delta_disks);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:setup_conf SourceFile:drivers/md/raid10.c SourceLine:3855 SourceSnippet:3853:
3854: /* FIXME calc properly */
3855: conf->mirrors = kzalloc_objs(struct raid10_info,
3856: mddev->raid_disks + max(0, -mddev->delta_disks));
3857: if (!conf->mirrors)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:setup_conf SourceFile:drivers/md/raid5.c SourceLine:7729 SourceSnippet:7727: conf->previous_raid_disks = mddev->raid_disks;
7728: else
7729: conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
7730: max_disks = max(conf->raid_disks, conf->previous_raid_disks);
7731:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:setup_geo SourceFile:drivers/md/raid10.c SourceLine:3764 SourceSnippet:3762: layout = mddev->layout;
3763: chunk = mddev->chunk_sectors;
3764: disks = mddev->raid_disks - mddev->delta_disks;
3765: break;
3766: case geo_new:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:setup_geo SourceFile:drivers/md/raid10.c SourceLine:3776 SourceSnippet:3774: layout = mddev->new_layout;
3775: chunk = mddev->new_chunk_sectors;
3776: disks = mddev->raid_disks + mddev->delta_disks;
3777: break;
3778: }
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:slot_store SourceFile:drivers/md/md.c SourceLine:3337 SourceSnippet:3335:
3336: if (slot >= rdev->mddev->raid_disks &&
3337: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
3338: return -ENOSPC;
3339:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:slot_store SourceFile:drivers/md/md.c SourceLine:3358 SourceSnippet:3356: } else {
3357: if (slot >= rdev->mddev->raid_disks &&
3358: slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
3359: return -ENOSPC;
3360: rdev->raid_disk = slot;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_1_sync SourceFile:drivers/md/md.c SourceLine:2268 SourceSnippet:2266: sb->reshape_position = cpu_to_le64(mddev->reshape_position);
2267: sb->new_layout = cpu_to_le32(mddev->new_layout);
2268: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
2269: sb->new_level = cpu_to_le32(mddev->new_level);
2270: sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_1_sync SourceFile:drivers/md/md.c SourceLine:2271 SourceSnippet:2269: sb->new_level = cpu_to_le32(mddev->new_level);
2270: sb->new_chunk = cpu_to_le32(mddev->new_chunk_sectors);
2271: if (mddev->delta_disks == 0 &&
2272: mddev->reshape_backwards)
2273: sb->feature_map
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:super_1_validate SourceFile:drivers/md/md.c SourceLine:2056 SourceSnippet:2054: if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
2055: mddev->reshape_position = le64_to_cpu(sb->reshape_position);
2056: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2057: mddev->new_level = le32_to_cpu(sb->new_level);
2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_1_validate SourceFile:drivers/md/md.c SourceLine:2060 SourceSnippet:2058: mddev->new_layout = le32_to_cpu(sb->new_layout);
2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_1_validate SourceFile:drivers/md/md.c SourceLine:2061 SourceSnippet:2059: mddev->new_chunk_sectors = le32_to_cpu(sb->new_chunk);
2060: if (mddev->delta_disks < 0 ||
2061: (mddev->delta_disks == 0 &&
2062: (le32_to_cpu(sb->feature_map)
2063: & MD_FEATURE_RESHAPE_BACKWARDS)))
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:super_1_validate SourceFile:drivers/md/md.c SourceLine:2067 SourceSnippet:2065: } else {
2066: mddev->reshape_position = MaxSector;
2067: mddev->delta_disks = 0;
2068: mddev->new_level = mddev->level;
2069: mddev->new_layout = mddev->layout;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_90_sync SourceFile:drivers/md/md.c SourceLine:1655 SourceSnippet:1653: sb->reshape_position = mddev->reshape_position;
1654: sb->new_level = mddev->new_level;
1655: sb->delta_disks = mddev->delta_disks;
1656: sb->new_layout = mddev->new_layout;
1657: sb->new_chunk = mddev->new_chunk_sectors << 9;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:super_90_validate SourceFile:drivers/md/md.c SourceLine:1513 SourceSnippet:1511: if (mddev->minor_version >= 91) {
1512: mddev->reshape_position = sb->reshape_position;
1513: mddev->delta_disks = sb->delta_disks;
1514: mddev->new_level = sb->new_level;
1515: mddev->new_layout = sb->new_layout;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_90_validate SourceFile:drivers/md/md.c SourceLine:1517 SourceSnippet:1515: mddev->new_layout = sb->new_layout;
1516: mddev->new_chunk_sectors = sb->new_chunk >> 9;
1517: if (mddev->delta_disks < 0)
1518: mddev->reshape_backwards = 1;
1519: } else {
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:super_90_validate SourceFile:drivers/md/md.c SourceLine:1521 SourceSnippet:1519: } else {
1520: mddev->reshape_position = MaxSector;
1521: mddev->delta_disks = 0;
1522: mddev->new_level = mddev->level;
1523: mddev->new_layout = mddev->layout;
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:super_init_validation SourceFile:drivers/md/dm-raid.c SourceLine:2272 SourceSnippet:2270: mddev->new_layout = le32_to_cpu(sb->new_layout);
2271: mddev->new_chunk_sectors = le32_to_cpu(sb->new_stripe_sectors);
2272: mddev->delta_disks = le32_to_cpu(sb->delta_disks);
2273: mddev->array_sectors = le64_to_cpu(sb->array_sectors);
2274:
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_init_validation SourceFile:drivers/md/dm-raid.c SourceLine:2282 SourceSnippet:2280: }
2281:
2282: if (mddev->delta_disks < 0 ||
2283: (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS)))
2284: mddev->reshape_backwards = 1;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_init_validation SourceFile:drivers/md/dm-raid.c SourceLine:2283 SourceSnippet:2281:
2282: if (mddev->delta_disks < 0 ||
2283: (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS)))
2284: mddev->reshape_backwards = 1;
2285: else
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_sync SourceFile:drivers/md/dm-raid.c SourceLine:2161 SourceSnippet:2159: sb->new_stripe_sectors = cpu_to_le32(mddev->new_chunk_sectors);
2160:
2161: sb->delta_disks = cpu_to_le32(mddev->delta_disks);
2162:
2163: smp_rmb(); /* Make sure we access most recent reshape position */
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:super_sync SourceFile:drivers/md/dm-raid.c SourceLine:2169 SourceSnippet:2167: sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_ACTIVE);
2168:
2169: if (mddev->delta_disks < 0 || mddev->reshape_backwards)
2170: sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_BACKWARDS);
2171: } else {
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:update_raid_disks SourceFile:drivers/md/md.c SourceLine:8060 SourceSnippet:8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:update_raid_disks SourceFile:drivers/md/md.c SourceLine:8061 SourceSnippet:8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
] map[ReferenceKind:reads ReferencingEntityKind:function ReferencingEntityName:update_raid_disks SourceFile:drivers/md/md.c SourceLine:8063 SourceSnippet:8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
] map[ReferenceKind:writes ReferencingEntityKind:function ReferencingEntityName:update_raid_disks SourceFile:drivers/md/md.c SourceLine:8068 SourceSnippet:8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
]] TruncatedOutput:false]
|
| 516/2 |
2026/09/09 21:38 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 44369
output: 36
thoughts: 45
Thoughts: Here's my take on those thoughts:
**Analyzing the RAID Disk Update Function**
Alright, let's dive into the `update_raid_disks()` function. I want to take a look at how disk updates are managed within the RAID driver, specifically the implementation found in `drivers/md/md.c`. I need to get my bearings, so I'm focusing my attention around line 8060. This should give me a good starting point to understand the core logic. I'm keen to see how the code handles changes to the disk set, whether it is addition, removal, failure, or replacement, and what implications these changes have on data integrity and redundancy. This is going to be interesting. Let's see what we've got!
|
| 517/2 |
2026/09/09 21:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:8050 LineCount:35]
Results: map[Contents:8050:
8051: rdev_for_each(rdev, mddev) {
8052: if (mddev->raid_disks < raid_disks &&
8053: rdev->data_offset < rdev->new_data_offset)
8054: return -EINVAL;
8055: if (mddev->raid_disks > raid_disks &&
8056: rdev->data_offset > rdev->new_data_offset)
8057: return -EINVAL;
8058: }
8059:
8060: mddev->delta_disks = raid_disks - mddev->raid_disks;
8061: if (mddev->delta_disks < 0)
8062: mddev->reshape_backwards = 1;
8063: else if (mddev->delta_disks > 0)
8064: mddev->reshape_backwards = 0;
8065:
8066: rv = mddev->pers->check_reshape(mddev);
8067: if (rv < 0) {
8068: mddev->delta_disks = 0;
8069: mddev->reshape_backwards = 0;
8070: }
8071: return rv;
8072: }
8073:
8074: static int get_cluster_ops(struct mddev *mddev)
8075: {
8076: xa_lock(&md_submodule);
8077: mddev->cluster_ops = xa_load(&md_submodule, ID_CLUSTER);
8078: if (mddev->cluster_ops &&
8079: !try_module_get(mddev->cluster_ops->head.owner))
8080: mddev->cluster_ops = NULL;
8081: xa_unlock(&md_submodule);
8082:
8083: return mddev->cluster_ops == NULL ? -ENOENT : 0;
8084: }
]
|
| 518/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 45187
output: 29
thoughts: 112
Thoughts: **Analyzing the RAID Disk Update**
Okay, so I'm digging into this `update_raid_disks` function. It seems straightforward enough at first glance. It calculates a `delta_disks` value by subtracting the current number of RAID disks from the target. Right, that makes sense. The crucial bit, however, is what happens next. If `mddev->pers->check_reshape(mddev)` returns a successful 0, it doesn't zero out `mddev->delta_disks`! That's... interesting. Potentially a source of subtle issues if we aren't careful.
This immediately makes me wonder about the implications, particularly with regard to how the array state behaves. I have to see how "inactive" status gets written to `array_state`. I need to review `array_state_store()` and `do_md_stop()` to understand how those functions interact with `delta_disks` under this condition. Got to cover my bases and fully comprehend the possible consequences of a non-zero `delta_disks` value.
|
| 519/2 |
2026/09/09 21:39 |
tool |
grepper |
0m
Args: map[Expression:do_md_stop PathPrefix:drivers/md/]
Results: map[Output:drivers/md/md.c=638=static void __mddev_put(struct mddev *mddev)
--
drivers/md/md.c-645- * If array is freed by stopping array, MD_DELETED is set by
drivers/md/md.c:646: * do_md_stop(), MD_DELETED is still set here in case mddev is freed
drivers/md/md.c-647- * directly by closing a mddev that is created by create_on_open.
--
drivers/md/md.c=915=void mddev_unlock(struct mddev *mddev)
--
drivers/md/md.c-977- * And MD_DELETED is only used for md raid which is set in
drivers/md/md.c:978: * do_md_stop. dm raid only uses md_stop to stop. So dm raid
drivers/md/md.c-979- * doesn't need to check MD_DELETED when getting reconfig lock
--
drivers/md/md.c=4613=array_state_show(struct mddev *mddev, char *page)
--
drivers/md/md.c-4650-
drivers/md/md.c:4651:static int do_md_stop(struct mddev *mddev, int ro);
drivers/md/md.c-4652-static int md_set_readonly(struct mddev *mddev);
--
drivers/md/md.c=4656=array_state_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4712- if (mddev->pers)
drivers/md/md.c:4713: err = do_md_stop(mddev, 2);
drivers/md/md.c-4714- break;
drivers/md/md.c-4715- case clear:
drivers/md/md.c:4716: err = do_md_stop(mddev, 0);
drivers/md/md.c-4717- break;
--
drivers/md/md.c=7114=static int md_set_readonly(struct mddev *mddev)
--
drivers/md/md.c-7161- */
drivers/md/md.c:7162:static int do_md_stop(struct mddev *mddev, int mode)
drivers/md/md.c-7163-{
--
drivers/md/md.c=7234=static void autorun_array(struct mddev *mddev)
--
drivers/md/md.c-7251- pr_warn("md: do_md_run() returned %d\n", err);
drivers/md/md.c:7252: do_md_stop(mddev, 0);
drivers/md/md.c-7253- }
--
drivers/md/md.c=8342=static int md_ioctl(struct block_device *bdev, blk_mode_t mode,
--
drivers/md/md.c-8435- case STOP_ARRAY:
drivers/md/md.c:8436: err = do_md_stop(mddev, 0);
drivers/md/md.c-8437- goto unlock;
--
drivers/md/md.h=407=struct mddev {
--
drivers/md/md.h-514- int in_sync; /* know to not need resync */
drivers/md/md.h:515: /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
drivers/md/md.h-516- * that we are never stopping an array while it is open.
--
drivers/md/md.h=709=static inline int __must_check mddev_lock(struct mddev *mddev)
--
drivers/md/md.h-714-
drivers/md/md.h:715: /* MD_DELETED is set in do_md_stop with reconfig_mutex.
drivers/md/md.h-716- * So check it here.
--
drivers/md/md.h-729- * holds the lock here can't be stopped. And all paths can't
drivers/md/md.h:730: * call this function after do_md_stop.
drivers/md/md.h-731- */
]
|
| 520/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 46698
output: 36
thoughts: 22
Thoughts: Okay, let's dive in. Here's my take on the process, pretending I'm the one thinking this through:
**Analyzing the `do_md_stop()` Function in `drivers/md/md.c`**
Alright, time to get my hands dirty. I'm going to take a look at the `do_md_stop()` function. It's in `drivers/md/md.c`, which tells me it's part of the core MD (Multiple Device) RAID driver framework within the kernel. Given the function name, I'm expecting this is the critical function responsible for shutting down a RAID array cleanly. This is where the real work happens when you unmount or stop an MD array. I'm expecting to see handling of various error conditions, and the actual mechanics of stopping the array, perhaps including the invalidating of data. I'll need to figure out what data structures it manipulates, what locks it might use, and how it interacts with the underlying block devices. This is a crucial area for understanding the stability of the kernel and is where bugs often hide. I expect to carefully trace its execution path. I will see if any data is written to disk. And I want to see if the function cleans the metadata.
|
| 521/2 |
2026/09/09 21:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7160 LineCount:60]
Results: map[Contents:7160: * 2 - stop but do not disassemble array
7161: */
7162: static int do_md_stop(struct mddev *mddev, int mode)
7163: {
7164: struct gendisk *disk = mddev->gendisk;
7165: struct md_rdev *rdev;
7166: int did_freeze = 0;
7167:
7168: if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
7169: did_freeze = 1;
7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
]
|
| 522/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 47969
output: 36
thoughts: 25
Thoughts: Here's my summary, as though I'm thinking through this code:
**Analyzing the `__md_stop()` Function**
Okay, let's zoom in on `__md_stop()`. I need to understand its role within this broader context, and the best way to do that is to dissect the code. Specifically, I'm going to focus my attention on lines 7085 through 7105. This function name strongly suggests this is the function responsible for shutting things down, which is absolutely critical. I need to figure out:
* What resources is it releasing?
* Are there any potential race conditions I need to be aware of?
* Does it handle errors gracefully during the shutdown process?
* How does it interact with other components or threads?
I'll be looking for any indications of cleanup, memory deallocation, file closing, and thread synchronization or termination. A poorly designed shutdown function can be a huge source of bugs, especially in complex systems. It could lead to data corruption, resource leaks, or even a system crash. My goal is to determine the function's safety, efficiency, and robustness.
|
| 523/2 |
2026/09/09 21:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7085 LineCount:30]
Results: map[Contents:7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
7099:
7100: void md_stop(struct mddev *mddev)
7101: {
7102: lockdep_assert_held(&mddev->reconfig_mutex);
7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
7110:
7111: EXPORT_SYMBOL_GPL(md_stop);
7112:
7113: /* ensure 'mddev->pers' exist before calling md_set_readonly() */
7114: static int md_set_readonly(struct mddev *mddev)
]
|
| 524/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 48716
output: 36
thoughts: 65
Thoughts: **Analyzing the `__md_stop()` Function**
Okay, so I'm looking at this `__md_stop()` function. My immediate understanding is that it's designed to essentially shut down a multi-device array. I see that the primary action it takes is detaching the "personality" β that's a key concept in MD RAID. Specifically, it nullifies `mddev->pers` which tells the system that the current personality for this array is no longer active. Then, it proceeds to free `mddev->private`. This seems pretty standard cleanup; it's getting rid of the data structures specific to the array's configuration.
Now, it looks like there's a conditional path, depending on what the `mode` variable is set to. If `mode` equals 0, the process goes further, calling `do_md_stop()`. I need to understand that path. I need to dive deeper into the code to grasp the complete stop sequence, I should read lines 7210-7235.
|
| 525/2 |
2026/09/09 21:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7210 LineCount:35]
Results: map[Contents:7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
7215: struct file *f = mddev->bitmap_info.file;
7216: spin_lock(&mddev->lock);
7217: mddev->bitmap_info.file = NULL;
7218: spin_unlock(&mddev->lock);
7219: fput(f);
7220: }
7221: mddev->bitmap_info.offset = 0;
7222:
7223: export_array(mddev);
7224: md_clean(mddev);
7225: if (!legacy_async_del_gendisk)
7226: set_bit(MD_DELETED, &mddev->flags);
7227: }
7228: md_new_event();
7229: sysfs_notify_dirent_safe(mddev->sysfs_state);
7230: return 0;
7231: }
7232:
7233: #ifndef MODULE
7234: static void autorun_array(struct mddev *mddev)
7235: {
7236: struct md_rdev *rdev;
7237: int err;
7238:
7239: if (list_empty(&mddev->disks))
7240: return;
7241:
7242: pr_info("md: running: ");
7243:
7244: rdev_for_each(rdev, mddev) {
]
|
| 526/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 49533
output: 36
thoughts: 66
Thoughts: **Analyzing the `md_clean()` Function Call**
Okay, so I've noticed something interesting on line 7224: the `md_clean(mddev)` function is being called, specifically when `mode == 0`. My mind immediately jumps to, "What's going on *inside* that `md_clean()` function?" This isn't a simple call, I need to understand what that function does to understand this section of code fully. Let's get right to it. I'll jump over to lines 7000-7040 to dissect that function's implementation. I suspect something significant is happening there if it's being called under that particular condition. Let's see...
|
| 527/2 |
2026/09/09 21:39 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7000 LineCount:40]
Results: map[Contents:7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
7031:
7032: static void __md_stop_writes(struct mddev *mddev)
7033: {
7034: timer_delete_sync(&mddev->safemode_timer);
7035:
7036: if (md_is_rdwr(mddev) || !mddev_is_dm(mddev)) {
7037: if (mddev->pers && mddev->pers->quiesce) {
7038: mddev->pers->quiesce(mddev, 1);
7039: mddev->pers->quiesce(mddev, 0);
]
|
| 528/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 50549
output: 37
thoughts: 151
Thoughts: **Tracing the Evolution of md_clean and do_md_stop**
Okay, so I'm diving into this `md_clean` function and how it relates to `do_md_stop`. My initial understanding is that when `mode` is 0, the `md_clean(mddev)` function is supposed to clean up a bunch of things: `delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors` and likely other related device parameters. But the behavior changes if `mode` is 2, where `md_clean` *isn't* called. That's the crux of this investigation.
My next step is to nail down the historical relationship between these functions, specifically when `md_clean` was either separated from `do_md_stop` or when the `do_md_stop(mddev, 2)` variation entered the picture. I need to understand the development timeline to get the context of this conditional behavior.
To do this, I'll leverage my usual toolkit β starting with `git log` on `drivers/md/md.c`, focusing on the symbol `md_clean`. This should give me a complete history of the function and its surrounding changes. I'll need to carefully analyze the commit messages and code changes to pinpoint the relevant events and understand the rationale behind them. From that, I'll have a much better handle on why mode 2 behaves as it does.
|
| 529/2 |
2026/09/09 21:39 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:md_clean]
Results: map[Output:62ed1b582246 md: allow configuring logical block size
25db5f284fb8 md: add legacy_async_del_gendisk mode
907a99c314a5 md: rename recovery_cp to resync_offset
5f286f33553d md: Don't clear MD_CLOSING until mddev is freed
9674f54e41ff md: Don't clear MD_CLOSING when the raid is about to stop
a1d767191096 md: use mddev->external to select holder in export_rdev()
ed821cf84e7b md: use MD_RESYNC_* whenever possible
f97a5528b21e md: introduce md_ro_state
2953079c692d md: separate flags for superblock changes
c20c33f0e2ab md-cluster: clean related infos of cluster
]
|
| 530/2 |
2026/09/09 21:39 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 51296
output: 51
thoughts: 133
Thoughts: **Tracing the Introduction of `md_clean`**
Okay, so I'm trying to figure out when the `md_clean` function was first implemented. Time to dig through the commit history. Let's start with a quick search to pinpoint its origin. Ah, here's something promising: commit `6177b472ab14e1ac88896960370dd54ba577d926`, titled "md: start to refactor do_md_stop," from March 2010. That's a good starting point. Let's take a closer look at this specific commit and see what it reveals about the initial development of `md_clean`. Hopefully, this commit will provide some context and maybe even link to more relevant changes.
|
| 531/2 |
2026/09/09 21:40 |
tool |
git-show |
0m
Args: map[Commit:6177b472ab14e1ac88896960370dd54ba577d926]
Results: map[Output:commit 6177b472ab14e1ac88896960370dd54ba577d926
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 29 11:37:13 2010 +1100
md: start to refactor do_md_stop
do_md_stop is large and clunky, so hard to understand.
This is a first step of refactoring, pulling two simple
sub-functions out.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e752332268d2..002d0a34d6ea 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4568,6 +4568,58 @@ void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
+static void md_clean(mddev_t *mddev)
+{
+ mddev->array_sectors = 0;
+ mddev->external_size = 0;
+ mddev->dev_sectors = 0;
+ mddev->raid_disks = 0;
+ mddev->recovery_cp = 0;
+ mddev->resync_min = 0;
+ mddev->resync_max = MaxSector;
+ mddev->reshape_position = MaxSector;
+ mddev->external = 0;
+ mddev->persistent = 0;
+ mddev->level = LEVEL_NONE;
+ mddev->clevel[0] = 0;
+ mddev->flags = 0;
+ mddev->ro = 0;
+ mddev->metadata_type[0] = 0;
+ mddev->chunk_sectors = 0;
+ mddev->ctime = mddev->utime = 0;
+ mddev->layout = 0;
+ mddev->max_disks = 0;
+ mddev->events = 0;
+ mddev->delta_disks = 0;
+ mddev->new_level = LEVEL_NONE;
+ mddev->new_layout = 0;
+ mddev->new_chunk_sectors = 0;
+ mddev->curr_resync = 0;
+ mddev->resync_mismatches = 0;
+ mddev->suspend_lo = mddev->suspend_hi = 0;
+ mddev->sync_speed_min = mddev->sync_speed_max = 0;
+ mddev->recovery = 0;
+ mddev->in_sync = 0;
+ mddev->degraded = 0;
+ mddev->barriers_work = 0;
+ mddev->safemode = 0;
+ mddev->bitmap_info.offset = 0;
+ mddev->bitmap_info.default_offset = 0;
+ mddev->bitmap_info.chunksize = 0;
+ mddev->bitmap_info.daemon_sleep = 0;
+ mddev->bitmap_info.max_write_behind = 0;
+}
+
+static void md_stop(mddev_t *mddev)
+{
+ mddev->pers->stop(mddev);
+ if (mddev->pers->sync_request && mddev->to_remove == NULL)
+ mddev->to_remove = &md_redundancy_group;
+ module_put(mddev->pers->owner);
+ mddev->pers = NULL;
+
+}
+
/* mode:
* 0 - completely stop and dis-assemble array
* 1 - switch to readonly
@@ -4608,14 +4660,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mddev->ro)
set_disk_ro(disk, 0);
- mddev->pers->stop(mddev);
+ md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- module_put(mddev->pers->owner);
- if (mddev->pers->sync_request && mddev->to_remove == NULL)
- mddev->to_remove = &md_redundancy_group;
- mddev->pers = NULL;
+
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4663,44 +4712,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
export_array(mddev);
- mddev->array_sectors = 0;
- mddev->external_size = 0;
- mddev->dev_sectors = 0;
- mddev->raid_disks = 0;
- mddev->recovery_cp = 0;
- mddev->resync_min = 0;
- mddev->resync_max = MaxSector;
- mddev->reshape_position = MaxSector;
- mddev->external = 0;
- mddev->persistent = 0;
- mddev->level = LEVEL_NONE;
- mddev->clevel[0] = 0;
- mddev->flags = 0;
- mddev->ro = 0;
- mddev->metadata_type[0] = 0;
- mddev->chunk_sectors = 0;
- mddev->ctime = mddev->utime = 0;
- mddev->layout = 0;
- mddev->max_disks = 0;
- mddev->events = 0;
- mddev->delta_disks = 0;
- mddev->new_level = LEVEL_NONE;
- mddev->new_layout = 0;
- mddev->new_chunk_sectors = 0;
- mddev->curr_resync = 0;
- mddev->resync_mismatches = 0;
- mddev->suspend_lo = mddev->suspend_hi = 0;
- mddev->sync_speed_min = mddev->sync_speed_max = 0;
- mddev->recovery = 0;
- mddev->in_sync = 0;
- mddev->degraded = 0;
- mddev->barriers_work = 0;
- mddev->safemode = 0;
- mddev->bitmap_info.offset = 0;
- mddev->bitmap_info.default_offset = 0;
- mddev->bitmap_info.chunksize = 0;
- mddev->bitmap_info.daemon_sleep = 0;
- mddev->bitmap_info.max_write_behind = 0;
+ md_clean(mddev);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
]
|
| 532/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 53553
output: 46
thoughts: 178
Thoughts: **Analyzing Recent Refactoring and Related Code Changes**
Okay, so I'm looking at these recent commits in the context of the `do_md_stop()` function. Commit `6177b472ab14e1ac88896960370dd54ba577d926` looks pretty straightforward. It seems to have been a focused refactoring of the `do_md_stop()` function itself. The interesting thing here is that the code that zeroes out `mddev->delta_disks` and related fields *was* already conditionally executed only during dis-assembly (`mode == 0`), which this refactoring didn't change. Good to note, confirms the scope of the change.
Now, let's dive into commit `91adb56473febeeb3ef657bb5147ddd355465700`. I need to understand *exactly* what this commit introduced. Time to go line-by-line and figure out everything it touched in relation to `do_md_stop()`. I need to assess any potential implications and make sure it integrates as expected.
|
| 533/2 |
2026/09/09 21:40 |
tool |
git-show |
0m
Args: map[Commit:91adb56473febeeb3ef657bb5147ddd355465700]
Results: map[Output:commit 91adb56473febeeb3ef657bb5147ddd355465700
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:39 2009 +1100
md/raid5: refactor raid5 "run"
.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index edbc80c4d346..d019a85547b4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4164,95 +4164,49 @@ static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- int working_disks = 0;
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
}
- if ((mddev->level == 5 && !algorithm_valid_raid5(mddev->layout)) ||
- (mddev->level == 6 && !algorithm_valid_raid6(mddev->layout))) {
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
printk(KERN_ERR "raid5: %s: layout %d not supported\n",
- mdname(mddev), mddev->layout);
- return -EIO;
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
}
-
- if (mddev->chunk_size < PAGE_SIZE) {
- printk(KERN_ERR "md/raid5: chunk_size must be at least "
- "PAGE_SIZE but %d < %ld\n",
- mddev->chunk_size, PAGE_SIZE);
- return -EINVAL;
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
- int max_degraded = (mddev->level == 5 ? 1 : 2);
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape "
- "(reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old
- * geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*
- (mddev->raid_disks - max_degraded))) {
- printk(KERN_ERR "raid5: reshape_position not "
- "on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*
- (old_disks-max_degraded));
- /* here_old is the first stripe that we might need to read
- * from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for "
- "auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
}
-
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
@@ -4264,13 +4218,12 @@ static int run(mddev_t *mddev)
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
}
spin_lock_init(&conf->device_lock);
- mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4299,41 +4252,136 @@ static int run(mddev_t *mddev)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
} else
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
conf->expand_progress = mddev->reshape_position;
- /* device size must be a multiple of chunk size */
- mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
- mddev->resync_max_sectors = mddev->dev_sectors;
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
+ goto abort;
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 5 ? 1 : 2);
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "(reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+ conf = setup_conf(mddev);
+
+ if (conf == NULL)
+ return -EIO;
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
@@ -4341,6 +4389,10 @@ static int run(mddev_t *mddev)
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
@@ -4356,27 +4408,6 @@ static int run(mddev_t *mddev)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
" devices, algorithm %d\n", conf->level, mdname(mddev),
@@ -4419,6 +4450,8 @@ static int run(mddev_t *mddev)
"raid5: failed to create sysfs attributes for %s\n",
mdname(mddev));
+ mddev->queue->queue_lock = &conf->device_lock;
+
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
@@ -4430,7 +4463,11 @@ static int run(mddev_t *mddev)
return 0;
abort:
+ if (mddev->thread)
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 84456b1af204..c172371481c7 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -386,6 +386,11 @@ struct raid5_private_data {
int pool_size; /* number of disks in stripeheads in pool */
spinlock_t device_lock;
struct disk_info *disks;
+
+ /* When taking over an array from a different personality, we store
+ * the new thread here until we fully activate the array.
+ */
+ struct mdk_thread_s *thread;
};
typedef struct raid5_private_data raid5_conf_t;
]
|
| 534/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 59122
output: 39
thoughts: 1262
Thoughts: **Root Cause Analysis of the RAID5 Crash**
Okay, let's break this down. That crash report is screaming at me: `kernel BUG at drivers/md/raid5.c:8117`! And that line? It's the `BUG_ON(mddev->delta_disks != 0);` call. This is a critical assertion, and it's failing. So, I immediately go back to the code history. The commit that *introduced* this `BUG_ON` is `91adb56473febeeb3ef657bb5147ddd355465700`.
Now, let's see why this assertion is even in the code in the first place. This commit also seems to be a refactor of `run()`, so let's see how `delta_disks` was used.
Before that commit, there was NO explicit check on `delta_disks == 0`. The code was *less* strict. If `mddev->delta_disks` was non-zero *and* `mddev->reshape_position` was at `MaxSector` (meaning no active reshape), the code simply set `conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;` and kept going. This worked, or at least, didn't crash.
The subsequent patch `91adb56473febeeb3ef657bb5147ddd355465700` *added* this assumption. This seems to be a case of a more stringent check where none was really needed. It was based on the belief that if no reshape was pending, then `delta_disks` should indeed be zero. But the crash shows that this assumption is *wrong*. The assertion *itself* is the root cause of the crash. And this assumption was added even to `setup_conf()` code.
Therefore, the crash arises because, at some point, the code is encountering a state where `mddev->delta_disks` *is* non-zero *and* `mddev->reshape_position == MaxSector`, contradicting the new assertion.
Now, I need to investigate what operations are leading to this state. Were there any changes to `mddev->delta_disks` or `reshape_position` or `array_state_store` or `raid_disks_store` in recent kernels? This could pinpoint the trigger. I'll need to do a `git log -L 8110,8120:drivers/md/raid5.c` to see if there were any modifications to that section of code recently.
|
| 535/2 |
2026/09/09 21:40 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/raid5.c SymbolName:raid5_run]
Results: map[Output:a47431dfb353 md/raid5: protect lockless recovery_offset accesses during reshape
4ffe28ed0d7c md/raid5: make sure max_sectors is not less than io_opt
9340a95d489a md/raid5: use mempool to allocate stripe_request_ctx
2d9f7150ac19 md/raid5: fix raid5_run() to return error when log_init() fails
907a99c314a5 md: rename recovery_cp to resync_offset
1ddeeb2a058d Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
f63f17350e53 md/raid5: use the atomic queue limit update APIs
176df894d797 md: add a mddev_is_dm helper
ad39c08186f8 md: Don't register sync_thread for reshape directly
ad8606702f26 md/raid5: remove rcu protection to access rdev from conf
]
|
| 536/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 61308
output: 26
thoughts: 40
Thoughts: Okay, let's dive into this. I'm taking a look at commit `ad39c08186f8`, specifically the change note "md: Don't register sync_thread for reshape directly". I need to understand what led to this decision. I expect this commit addresses a potential synchronization issue related to the `reshape` operation. My initial thought is that the direct registration of a `sync_thread` might have introduced some inefficiencies, race conditions, or complexities that warranted its removal or modification. I'll need to examine the code changes carefully to see *why* they decided not to register `sync_thread` directly. Were there performance implications? Was it causing deadlocks? Did it introduce unintended side effects? Time to dig in.
|
| 537/2 |
2026/09/09 21:40 |
tool |
git-show |
0m
Args:
Results: map[Output:commit ad39c08186f8a0f221337985036ba86731d6aafe
Author: Yu Kuai <yukuai3@huawei.com>
Date: Thu Feb 1 17:25:49 2024 +0800
md: Don't register sync_thread for reshape directly
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
Fixes: f67055780caa ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com
diff --git a/drivers/md/md.c b/drivers/md/md.c
index fbf04160d009..dcde67a81647 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9376,6 +9376,7 @@ static void md_start_sync(struct work_struct *ws)
struct mddev *mddev = container_of(ws, struct mddev, sync_work);
int spares = 0;
bool suspend = false;
+ char *name;
if (md_spares_need_change(mddev))
suspend = true;
@@ -9408,8 +9409,10 @@ static void md_start_sync(struct work_struct *ws)
if (spares)
md_bitmap_write_all(mddev->bitmap);
+ name = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ?
+ "reshape" : "resync";
rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "resync"));
+ md_register_thread(md_do_sync, mddev, name));
if (!mddev->sync_thread) {
pr_warn("%s: could not start resync thread...\n",
mdname(mddev));
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7412066ea22c..a5f8419e2df1 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4175,11 +4175,7 @@ static int raid10_run(struct mddev *mddev)
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread)
- goto out_free_conf;
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
}
return 0;
@@ -4573,16 +4569,8 @@ static int raid10_start_reshape(struct mddev *mddev)
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread) {
- ret = -EAGAIN;
- goto abort;
- }
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
conf->reshape_checkpoint = jiffies;
- md_wakeup_thread(mddev->sync_thread);
md_new_event();
return 0;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8497880135ee..6a7a32f7fb91 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7936,11 +7936,7 @@ static int raid5_run(struct mddev *mddev)
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread)
- goto abort;
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
}
/* Ok, everything is just fine now */
@@ -8506,29 +8502,8 @@ static int raid5_start_reshape(struct mddev *mddev)
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
- set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
- rcu_assign_pointer(mddev->sync_thread,
- md_register_thread(md_do_sync, mddev, "reshape"));
- if (!mddev->sync_thread) {
- mddev->recovery = 0;
- spin_lock_irq(&conf->device_lock);
- write_seqcount_begin(&conf->gen_lock);
- mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
- mddev->new_chunk_sectors =
- conf->chunk_sectors = conf->prev_chunk_sectors;
- mddev->new_layout = conf->algorithm = conf->prev_algo;
- rdev_for_each(rdev, mddev)
- rdev->new_data_offset = rdev->data_offset;
- smp_wmb();
- conf->generation --;
- conf->reshape_progress = MaxSector;
- mddev->reshape_position = MaxSector;
- write_seqcount_end(&conf->gen_lock);
- spin_unlock_irq(&conf->device_lock);
- return -EAGAIN;
- }
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
conf->reshape_checkpoint = jiffies;
- md_wakeup_thread(mddev->sync_thread);
md_new_event();
return 0;
}
]
|
| 538/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 64090
output: 25
thoughts: 83
Thoughts: Here's my summary, as I see it:
**Digging into a RAID5 Reshape Bugfix**
Okay, so I'm looking at this commit, `ad39c08186f8`, and the message is pretty clear: it's fixing something related to RAID5 reshape. Specifically, it references `f67055780caa`. That's the key. I need to understand what that commit, `f67055780caa`, actually *did* in order to fully grasp this fix. I need to check the code that the referenced commit introduces to understand the context of the fix in `ad39c08186f8`. Let's get to it.
|
| 539/2 |
2026/09/09 21:40 |
tool |
git-show |
0m
Args:
Results: map[Output:commit f67055780caac6a99f43834795c43acf99eba6a6
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 27 01:18:11 2006 -0800
[PATCH] md: Checkpoint and allow restart of raid5 reshape
We allow the superblock to record an 'old' and a 'new' geometry, and a
position where any conversion is up to. The geometry allows for changing
chunksize, layout and level as well as number of devices.
When using verion-0.90 superblock, we convert the version to 0.91 while the
conversion is happening so that an old kernel will refuse the assemble the
array. For version-1, we use a feature bit for the same effect.
When starting an array we check for an incomplete reshape and restart the
reshape process if needed. If the reshape stopped at an awkward time (like
when updating the first stripe) we refuse to assemble the array, and let
user-space worry about it.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d169bc964676..b9dfdfccdb78 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -662,7 +662,8 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version
}
if (sb->major_version != 0 ||
- sb->minor_version != 90) {
+ sb->minor_version < 90 ||
+ sb->minor_version > 91) {
printk(KERN_WARNING "Bad version number %d.%d on %s\n",
sb->major_version, sb->minor_version,
b);
@@ -747,6 +748,20 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
mddev->bitmap_offset = 0;
mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
+ if (mddev->minor_version >= 91) {
+ mddev->reshape_position = sb->reshape_position;
+ mddev->delta_disks = sb->delta_disks;
+ mddev->new_level = sb->new_level;
+ mddev->new_layout = sb->new_layout;
+ mddev->new_chunk = sb->new_chunk;
+ } else {
+ mddev->reshape_position = MaxSector;
+ mddev->delta_disks = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk = mddev->chunk_size;
+ }
+
if (sb->state & (1<<MD_SB_CLEAN))
mddev->recovery_cp = MaxSector;
else {
@@ -841,7 +856,6 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
sb->md_magic = MD_SB_MAGIC;
sb->major_version = mddev->major_version;
- sb->minor_version = mddev->minor_version;
sb->patch_version = mddev->patch_version;
sb->gvalid_words = 0; /* ignored */
memcpy(&sb->set_uuid0, mddev->uuid+0, 4);
@@ -860,6 +874,17 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev)
sb->events_hi = (mddev->events>>32);
sb->events_lo = (u32)mddev->events;
+ if (mddev->reshape_position == MaxSector)
+ sb->minor_version = 90;
+ else {
+ sb->minor_version = 91;
+ sb->reshape_position = mddev->reshape_position;
+ sb->new_level = mddev->new_level;
+ sb->delta_disks = mddev->delta_disks;
+ sb->new_layout = mddev->new_layout;
+ sb->new_chunk = mddev->new_chunk;
+ }
+ mddev->minor_version = sb->minor_version;
if (mddev->in_sync)
{
sb->recovery_cp = mddev->recovery_cp;
@@ -1104,6 +1129,20 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
}
mddev->bitmap_offset = (__s32)le32_to_cpu(sb->bitmap_offset);
}
+ if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
+ mddev->reshape_position = le64_to_cpu(sb->reshape_position);
+ mddev->delta_disks = le32_to_cpu(sb->delta_disks);
+ mddev->new_level = le32_to_cpu(sb->new_level);
+ mddev->new_layout = le32_to_cpu(sb->new_layout);
+ mddev->new_chunk = le32_to_cpu(sb->new_chunk)<<9;
+ } else {
+ mddev->reshape_position = MaxSector;
+ mddev->delta_disks = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk = mddev->chunk_size;
+ }
+
} else if (mddev->pers == NULL) {
/* Insist of good event counter while assembling */
__u64 ev1 = le64_to_cpu(sb->events);
@@ -1175,6 +1214,14 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
}
+ if (mddev->reshape_position != MaxSector) {
+ sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE);
+ sb->reshape_position = cpu_to_le64(mddev->reshape_position);
+ sb->new_layout = cpu_to_le32(mddev->new_layout);
+ sb->delta_disks = cpu_to_le32(mddev->delta_disks);
+ sb->new_level = cpu_to_le32(mddev->new_level);
+ sb->new_chunk = cpu_to_le32(mddev->new_chunk>>9);
+ }
max_dev = 0;
ITERATE_RDEV(mddev,rdev2,tmp)
@@ -1497,7 +1544,7 @@ static void sync_sbs(mddev_t * mddev)
}
}
-static void md_update_sb(mddev_t * mddev)
+void md_update_sb(mddev_t * mddev)
{
int err;
struct list_head *tmp;
@@ -1574,6 +1621,7 @@ static void md_update_sb(mddev_t * mddev)
wake_up(&mddev->sb_wait);
}
+EXPORT_SYMBOL_GPL(md_update_sb);
/* words written to sysfs files may, or my not, be \n terminated.
* We want to accept with case. For this we use cmd_match.
@@ -2545,6 +2593,14 @@ static int do_md_run(mddev_t * mddev)
mddev->level = pers->level;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
+ if (mddev->reshape_position != MaxSector &&
+ pers->reshape == NULL) {
+ /* This personality cannot handle reshaping... */
+ mddev->pers = NULL;
+ module_put(pers->owner);
+ return -EINVAL;
+ }
+
mddev->recovery = 0;
mddev->resync_max_sectors = mddev->size << 1; /* may be over-ridden by personality */
mddev->barriers_work = 1;
@@ -3433,11 +3489,18 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
mddev->default_bitmap_offset = MD_SB_BYTES >> 9;
mddev->bitmap_offset = 0;
+ mddev->reshape_position = MaxSector;
+
/*
* Generate a 128 bit UUID
*/
get_random_bytes(mddev->uuid, 16);
+ mddev->new_level = mddev->level;
+ mddev->new_chunk = mddev->chunk_size;
+ mddev->new_layout = mddev->layout;
+ mddev->delta_disks = 0;
+
return 0;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5d88329e3c7a..b65b8cfbdf30 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1789,6 +1789,11 @@ static int run(mddev_t *mddev)
mdname(mddev), mddev->level);
goto out;
}
+ if (mddev->reshape_position != MaxSector) {
+ printk("raid1: %s: reshape_position set but not supported\n",
+ mdname(mddev));
+ goto out;
+ }
/*
* copy the already verified devices into our private RAID1
* bookkeeping area. [whatever we allocate in run(),
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index b29135acb1d9..20ae32d67e21 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -22,6 +22,7 @@
#include <linux/raid/raid5.h>
#include <linux/highmem.h>
#include <linux/bitops.h>
+#include <linux/kthread.h>
#include <asm/atomic.h>
#include <linux/raid/bitmap.h>
@@ -1504,6 +1505,7 @@ static void handle_stripe(struct stripe_head *sh)
clear_bit(STRIPE_EXPANDING, &sh->state);
} else if (expanded) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
+ atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
@@ -1875,6 +1877,26 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
*/
int i;
int dd_idx;
+
+ if (sector_nr == 0 &&
+ conf->expand_progress != 0) {
+ /* restarting in the middle, skip the initial sectors */
+ sector_nr = conf->expand_progress;
+ sector_div(sector_nr, conf->raid_disks-1);
+ *skipped = 1;
+ return sector_nr;
+ }
+
+ /* Cannot proceed until we've updated the superblock... */
+ wait_event(conf->wait_for_overlap,
+ atomic_read(&conf->reshape_stripes)==0);
+ mddev->reshape_position = conf->expand_progress;
+
+ mddev->sb_dirty = 1;
+ md_wakeup_thread(mddev->thread);
+ wait_event(mddev->sb_wait, mddev->sb_dirty == 0 ||
+ kthread_should_stop());
+
for (i=0; i < conf->chunk_size/512; i+= STRIPE_SECTORS) {
int j;
int skipped = 0;
@@ -1882,6 +1904,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
sh = get_active_stripe(conf, sector_nr+i,
conf->raid_disks, pd_idx, 0);
set_bit(STRIPE_EXPANDING, &sh->state);
+ atomic_inc(&conf->reshape_stripes);
/* If any of this stripe is beyond the end of the old
* array, then we need to zero those blocks
*/
@@ -2121,10 +2144,61 @@ static int run(mddev_t *mddev)
return -EIO;
}
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+
+ if (mddev->new_level != mddev->level ||
+ mddev->new_layout != mddev->layout ||
+ mddev->new_chunk != mddev->chunk_size) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ if (mddev->delta_disks <= 0) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape (reduce disks) required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->chunk_size>>9)*(mddev->raid_disks-1))) {
+ printk(KERN_ERR "raid5: reshape_position not on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*(old_disks-1));
+ /* here_old is the first stripe that we might need to read from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ }
+
+
mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
if ((conf = mddev->private) == NULL)
goto abort;
- conf->disks = kzalloc(mddev->raid_disks * sizeof(struct disk_info),
+ if (mddev->reshape_position == MaxSector) {
+ conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
+ } else {
+ conf->raid_disks = mddev->raid_disks;
+ conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
+ }
+
+ conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
if (!conf->disks)
goto abort;
@@ -2148,7 +2222,7 @@ static int run(mddev_t *mddev)
ITERATE_RDEV(mddev,rdev,tmp) {
raid_disk = rdev->raid_disk;
- if (raid_disk >= mddev->raid_disks
+ if (raid_disk >= conf->raid_disks
|| raid_disk < 0)
continue;
disk = conf->disks + raid_disk;
@@ -2164,7 +2238,6 @@ static int run(mddev_t *mddev)
}
}
- conf->raid_disks = mddev->raid_disks;
/*
* 0 for a fully functional array, 1 for a degraded array.
*/
@@ -2174,7 +2247,7 @@ static int run(mddev_t *mddev)
conf->level = mddev->level;
conf->algorithm = mddev->layout;
conf->max_nr_stripes = NR_STRIPES;
- conf->expand_progress = MaxSector;
+ conf->expand_progress = mddev->reshape_position;
/* device size must be a multiple of chunk size */
mddev->size &= ~(mddev->chunk_size/1024 -1);
@@ -2247,6 +2320,20 @@ static int run(mddev_t *mddev)
print_raid5_conf(conf);
+ if (conf->expand_progress != MaxSector) {
+ printk("...ok start reshape thread\n");
+ atomic_set(&conf->reshape_stripes, 0);
+ clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
+ clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
+ set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
+ mddev->sync_thread = md_register_thread(md_do_sync, mddev,
+ "%s_reshape");
+ /* FIXME if md_register_thread fails?? */
+ md_wakeup_thread(mddev->sync_thread);
+
+ }
+
/* read-ahead size must cover two whole stripes, which is
* 2 * (n-1) * chunksize where 'n' is the number of raid devices
*/
@@ -2262,8 +2349,8 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->issue_flush_fn = raid5_issue_flush;
+ mddev->array_size = mddev->size * (conf->previous_raid_disks - 1);
- mddev->array_size = mddev->size * (mddev->raid_disks - 1);
return 0;
abort:
if (conf) {
@@ -2436,7 +2523,7 @@ static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
/*
* find the disk ...
*/
- for (disk=0; disk < mddev->raid_disks; disk++)
+ for (disk=0; disk < conf->raid_disks; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
@@ -2518,9 +2605,10 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
if (err)
return err;
+ atomic_set(&conf->reshape_stripes, 0);
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
- mddev->raid_disks = conf->raid_disks = raid_disks;
+ conf->raid_disks = raid_disks;
conf->expand_progress = 0;
spin_unlock_irq(&conf->device_lock);
@@ -2542,6 +2630,14 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
}
mddev->degraded = (raid_disks - conf->previous_raid_disks) - added_devices;
+ mddev->new_chunk = mddev->chunk_size;
+ mddev->new_layout = mddev->layout;
+ mddev->new_level = mddev->level;
+ mddev->raid_disks = raid_disks;
+ mddev->delta_disks = raid_disks - conf->previous_raid_disks;
+ mddev->reshape_position = 0;
+ mddev->sb_dirty = 1;
+
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
@@ -2552,6 +2648,7 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
+ mddev->delta_disks = 0;
conf->expand_progress = MaxSector;
spin_unlock_irq(&conf->device_lock);
return -EAGAIN;
@@ -2566,20 +2663,23 @@ static void end_reshape(raid5_conf_t *conf)
{
struct block_device *bdev;
- conf->mddev->array_size = conf->mddev->size * (conf->mddev->raid_disks-1);
- set_capacity(conf->mddev->gendisk, conf->mddev->array_size << 1);
- conf->mddev->changed = 1;
-
- bdev = bdget_disk(conf->mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, conf->mddev->array_size << 10);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
+ if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
+ conf->mddev->array_size = conf->mddev->size * (conf->raid_disks-1);
+ set_capacity(conf->mddev->gendisk, conf->mddev->array_size << 1);
+ conf->mddev->changed = 1;
+
+ bdev = bdget_disk(conf->mddev->gendisk, 0);
+ if (bdev) {
+ mutex_lock(&bdev->bd_inode->i_mutex);
+ i_size_write(bdev->bd_inode, conf->mddev->array_size << 10);
+ mutex_unlock(&bdev->bd_inode->i_mutex);
+ bdput(bdev);
+ }
+ spin_lock_irq(&conf->device_lock);
+ conf->expand_progress = MaxSector;
+ spin_unlock_irq(&conf->device_lock);
+ conf->mddev->reshape_position = MaxSector;
}
- spin_lock_irq(&conf->device_lock);
- conf->expand_progress = MaxSector;
- spin_unlock_irq(&conf->device_lock);
}
static void raid5_quiesce(mddev_t *mddev, int state)
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index 9c77cde5a795..66b44e5e0d6e 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -95,6 +95,8 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size,
extern void md_do_sync(mddev_t *mddev);
extern void md_new_event(mddev_t *mddev);
+extern void md_update_sb(mddev_t * mddev);
+
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
#endif
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 4e26ef2cacca..1a6f9f2f6282 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -132,6 +132,14 @@ struct mddev_s
char uuid[16];
+ /* If the array is being reshaped, we need to record the
+ * new shape and an indication of where we are up to.
+ * This is written to the superblock.
+ * If reshape_position is MaxSector, then no reshape is happening (yet).
+ */
+ sector_t reshape_position;
+ int delta_disks, new_level, new_layout, new_chunk;
+
struct mdk_thread_s *thread; /* management thread */
struct mdk_thread_s *sync_thread; /* doing resync or reconstruct */
sector_t curr_resync; /* blocks scheduled */
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index c100fa5d4bfa..774e1acfb8c4 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -102,6 +102,18 @@ typedef struct mdp_device_descriptor_s {
#define MD_SB_ERRORS 1
#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */
+
+/*
+ * Notes:
+ * - if an array is being reshaped (restriped) in order to change the
+ * the number of active devices in the array, 'raid_disks' will be
+ * the larger of the old and new numbers. 'delta_disks' will
+ * be the "new - old". So if +ve, raid_disks is the new value, and
+ * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the
+ * old value and "raid_disks+delta_disks" is the new (smaller) value.
+ */
+
+
typedef struct mdp_superblock_s {
/*
* Constant generic information
@@ -146,7 +158,13 @@ typedef struct mdp_superblock_s {
__u32 cp_events_hi; /* 10 high-order of checkpoint update count */
#endif
__u32 recovery_cp; /* 11 recovery checkpoint sector count */
- __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 12];
+ /* There are only valid for minor_version > 90 */
+ __u64 reshape_position; /* 12,13 next address in array-space for reshape */
+ __u32 new_level; /* 14 new level we are reshaping to */
+ __u32 delta_disks; /* 15 change in number of raid_disks */
+ __u32 new_layout; /* 16 new layout */
+ __u32 new_chunk; /* 17 new chunk size (bytes) */
+ __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
/*
* Personality information
@@ -207,7 +225,14 @@ struct mdp_superblock_1 {
* NOTE: signed, so bitmap can be before superblock
* only meaningful of feature_map[0] is set.
*/
- __u8 pad1[128-100]; /* set to 0 when written */
+
+ /* These are only valid with feature bit '4' */
+ __u64 reshape_position; /* next address in array-space for reshape */
+ __u32 new_level; /* new level we are reshaping to */
+ __u32 delta_disks; /* change in number of raid_disks */
+ __u32 new_layout; /* new layout */
+ __u32 new_chunk; /* new chunk size (bytes) */
+ __u8 pad1[128-124]; /* set to 0 when written */
/* constant this-device information - 64 bytes */
__u64 data_offset; /* sector start of data, often 0 */
@@ -240,8 +265,9 @@ struct mdp_superblock_1 {
/* feature_map bits */
#define MD_FEATURE_BITMAP_OFFSET 1
+#define MD_FEATURE_RESHAPE_ACTIVE 4
-#define MD_FEATURE_ALL 1
+#define MD_FEATURE_ALL 5
#endif
diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h
index 55c738d50508..abcdf0d0658a 100644
--- a/include/linux/raid/raid5.h
+++ b/include/linux/raid/raid5.h
@@ -224,6 +224,7 @@ struct raid5_private_data {
struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */
atomic_t preread_active_stripes; /* stripes with scheduled io */
+ atomic_t reshape_stripes; /* stripes with pending writes for reshape */
/* unfortunately we need two cache names as we temporarily have
* two caches.
*/
]
|
| 540/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 72570
output: 50
thoughts: 331
Thoughts: **Analyzing the Reshape Logic**
Okay, let's break this down. First, in commit `f67055780caa`, we see `delta_disks` being introduced into `struct mddev` and, crucially, into `super_90_validate` and `super_1_validate`. The key observation is that when `reshape_position` is equal to `MaxSector`, these validation functions *zero* out `delta_disks`. I'm already starting to see a potential edge case here...
The code snippet in that same commit is also interesting. We're setting `conf->previous_raid_disks` and `conf->raid_disks` based on `mddev->reshape_position`. The interesting part is that when `reshape_position` isn't `MaxSector`, we calculate `conf->previous_raid_disks` using `mddev->raid_disks - mddev->delta_disks`. However, at the time, the `run()` function didn't have any checks or assertions that `delta_disks` *had* to be zero in a specific condition. This could be a vulnerability, a potential area of undefined behavior or an area to be optimized.
Now, let's shift gears and examine commit `63c70c4f3a30e77e6f445bd16eff7934a031ebd3`, "md: Split reshape handler in check_reshape and start_reshape". I need to dig into this one to see what changes were made there in the context of `delta_disks` and how it might impact the previous code. This could be where the situation is improved, made worse, or left unchanged. I need to understand this new change in light of the previous.
|
| 541/2 |
2026/09/09 21:40 |
tool |
git-show |
0m
Args: map[Commit:63c70c4f3a30e77e6f445bd16eff7934a031ebd3]
Results: map[Output:commit 63c70c4f3a30e77e6f445bd16eff7934a031ebd3
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 27 01:18:13 2006 -0800
[PATCH] md: Split reshape handler in check_reshape and start_reshape
check_reshape checks validity and does things that can be done instantly -
like adding devices to raid1. start_reshape initiates a restriping process to
convert the whole array.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b9dfdfccdb78..1a637676a930 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2594,7 +2594,7 @@ static int do_md_run(mddev_t * mddev)
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (mddev->reshape_position != MaxSector &&
- pers->reshape == NULL) {
+ pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
mddev->pers = NULL;
module_put(pers->owner);
@@ -3556,14 +3556,16 @@ static int update_raid_disks(mddev_t *mddev, int raid_disks)
{
int rv;
/* change the number of raid disks */
- if (mddev->pers->reshape == NULL)
+ if (mddev->pers->check_reshape == NULL)
return -EINVAL;
if (raid_disks <= 0 ||
raid_disks >= mddev->max_disks)
return -EINVAL;
- if (mddev->sync_thread)
+ if (mddev->sync_thread || mddev->reshape_position != MaxSector)
return -EBUSY;
- rv = mddev->pers->reshape(mddev, raid_disks);
+ mddev->delta_disks = raid_disks - mddev->raid_disks;
+
+ rv = mddev->pers->check_reshape(mddev);
return rv;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index b65b8cfbdf30..04418e10d1dc 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1976,7 +1976,7 @@ static int raid1_resize(mddev_t *mddev, sector_t sectors)
return 0;
}
-static int raid1_reshape(mddev_t *mddev, int raid_disks)
+static int raid1_reshape(mddev_t *mddev)
{
/* We need to:
* 1/ resize the r1bio_pool
@@ -1993,10 +1993,22 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
struct pool_info *newpoolinfo;
mirror_info_t *newmirrors;
conf_t *conf = mddev_to_conf(mddev);
- int cnt;
+ int cnt, raid_disks;
int d, d2;
+ /* Cannot change chunk_size, layout, or level */
+ if (mddev->chunk_size != mddev->new_chunk ||
+ mddev->layout != mddev->new_layout ||
+ mddev->level != mddev->new_level) {
+ mddev->new_chunk = mddev->chunk_size;
+ mddev->new_layout = mddev->layout;
+ mddev->new_level = mddev->level;
+ return -EINVAL;
+ }
+
+ raid_disks = mddev->raid_disks + mddev->delta_disks;
+
if (raid_disks < conf->raid_disks) {
cnt=0;
for (d= 0; d < conf->raid_disks; d++)
@@ -2043,6 +2055,7 @@ static int raid1_reshape(mddev_t *mddev, int raid_disks)
mddev->degraded += (raid_disks - conf->raid_disks);
conf->raid_disks = mddev->raid_disks = raid_disks;
+ mddev->delta_disks = 0;
conf->last_used = 0; /* just make sure it is in-range */
lower_barrier(conf);
@@ -2084,7 +2097,7 @@ static struct mdk_personality raid1_personality =
.spare_active = raid1_spare_active,
.sync_request = sync_request,
.resize = raid1_resize,
- .reshape = raid1_reshape,
+ .check_reshape = raid1_reshape,
.quiesce = raid1_quiesce,
};
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 089a32604305..355dafb98aac 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2590,21 +2590,15 @@ static int raid5_resize(mddev_t *mddev, sector_t sectors)
}
#ifdef CONFIG_MD_RAID5_RESHAPE
-static int raid5_reshape(mddev_t *mddev, int raid_disks)
+static int raid5_check_reshape(mddev_t *mddev)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
int err;
- mdk_rdev_t *rdev;
- struct list_head *rtmp;
- int spares = 0;
- int added_devices = 0;
- if (mddev->degraded ||
- test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
- return -EBUSY;
- if (conf->raid_disks > raid_disks)
- return -EINVAL; /* Cannot shrink array yet */
- if (conf->raid_disks == raid_disks)
+ if (mddev->delta_disks < 0 ||
+ mddev->new_level != mddev->level)
+ return -EINVAL; /* Cannot shrink array or change level yet */
+ if (mddev->delta_disks == 0)
return 0; /* nothing to do */
/* Can only proceed if there are plenty of stripe_heads.
@@ -2615,30 +2609,48 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
* If the chunk size is greater, user-space should request more
* stripe_heads first.
*/
- if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
+ if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes ||
+ (mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n",
(mddev->chunk_size / STRIPE_SIZE)*4);
return -ENOSPC;
}
+ err = resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
+ if (err)
+ return err;
+
+ /* looks like we might be able to manage this */
+ return 0;
+}
+
+static int raid5_start_reshape(mddev_t *mddev)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ mdk_rdev_t *rdev;
+ struct list_head *rtmp;
+ int spares = 0;
+ int added_devices = 0;
+
+ if (mddev->degraded ||
+ test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return -EBUSY;
+
ITERATE_RDEV(mddev, rdev, rtmp)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags))
spares++;
- if (conf->raid_disks + spares < raid_disks-1)
+
+ if (spares < mddev->delta_disks-1)
/* Not enough devices even to make a degraded array
* of that size
*/
return -EINVAL;
- err = resize_stripes(conf, raid_disks);
- if (err)
- return err;
-
atomic_set(&conf->reshape_stripes, 0);
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
- conf->raid_disks = raid_disks;
+ conf->raid_disks += mddev->delta_disks;
conf->expand_progress = 0;
conf->expand_lo = 0;
spin_unlock_irq(&conf->device_lock);
@@ -2660,12 +2672,8 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
break;
}
- mddev->degraded = (raid_disks - conf->previous_raid_disks) - added_devices;
- mddev->new_chunk = mddev->chunk_size;
- mddev->new_layout = mddev->layout;
- mddev->new_level = mddev->level;
- mddev->raid_disks = raid_disks;
- mddev->delta_disks = raid_disks - conf->previous_raid_disks;
+ mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) - added_devices;
+ mddev->raid_disks = conf->raid_disks;
mddev->reshape_position = 0;
mddev->sb_dirty = 1;
@@ -2679,7 +2687,6 @@ static int raid5_reshape(mddev_t *mddev, int raid_disks)
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
- mddev->delta_disks = 0;
conf->expand_progress = MaxSector;
spin_unlock_irq(&conf->device_lock);
return -EAGAIN;
@@ -2752,7 +2759,8 @@ static struct mdk_personality raid5_personality =
.sync_request = sync_request,
.resize = raid5_resize,
#ifdef CONFIG_MD_RAID5_RESHAPE
- .reshape = raid5_reshape,
+ .check_reshape = raid5_check_reshape,
+ .start_reshape = raid5_start_reshape,
#endif
.quiesce = raid5_quiesce,
};
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 1a6f9f2f6282..002ee631fabb 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -261,7 +261,8 @@ struct mdk_personality
int (*spare_active) (mddev_t *mddev);
sector_t (*sync_request)(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster);
int (*resize) (mddev_t *mddev, sector_t sectors);
- int (*reshape) (mddev_t *mddev, int raid_disks);
+ int (*check_reshape) (mddev_t *mddev);
+ int (*start_reshape) (mddev_t *mddev);
int (*reconfig) (mddev_t *mddev, int layout, int chunk_size);
/* quiesce moves between quiescence states
* 0 - fully active
]
|
| 542/2 |
2026/09/09 21:40 |
llm |
fixes-finder-compressor |
0m
Model:
Reply: ### State of Workspace and Investigation Summary
#### 1. Approaches Tried and Results
- **Stack trace & Crash analysis**:
- Crash occurs in `raid5_run()` (`drivers/md/raid5.c:8117` in current tree, formerly `run()`), hitting assertion: `BUG_ON(mddev->delta_disks != 0);`
- Context:
1. Active array has `raid_disks` modified via sysfs (`update_raid_disks()`), setting `mddev->delta_disks != 0`. Reshape is checked (`check_reshape()` returns 0) but not started (`reshape_position` stays `MaxSector`).
2. Array is deactivated to `"inactive"` via `array_state_store()` -> `do_md_stop(mddev, 2)` -> `__md_stop(mddev)` (formerly `md_stop()`).
3. `mode == 2` detaches personality and frees private data, but does not call `md_clean(mddev)` (only called in `mode == 0`).
4. Pending reshape parameters (`delta_disks`, `new_level`, `new_layout`, `new_chunk_sectors`, `reshape_backwards`) remained uncleared in `mddev`.
5. Array is reactivated with `array_state_store()` -> `"active"` -> `md_run()` -> `raid5_run()`.
6. Because `reshape_position == MaxSector`, `raid5_run()` executes the `else` branch which asserts consistency of `level`, `layout`, `chunk_sectors`, and `BUG_ON(mddev->delta_disks != 0)`.
- **Git Blame / History of Crash Line (`drivers/md/raid5.c:8117`)**:
- `git-blame` on lines 8113β8117 shows:
```c
91adb56473feb (NeilBrown 2009-03-31) } else {
91adb56473feb (NeilBrown 2009-03-31) BUG_ON(mddev->level != mddev->new_level);
91adb56473feb (NeilBrown 2009-03-31) BUG_ON(mddev->layout != mddev->new_layout);
664e7c413f1e9 (Andre Noll 2009-06-18) BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
91adb56473feb (NeilBrown 2009-03-31) BUG_ON(mddev->delta_disks != 0);
```
- Commit `664e7c413f1e9` merely converted `new_chunk` from bytes to sectors (`new_chunk_sectors`), not altering logic.
- Commit `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"", Tue Mar 31 14:39:39 2009 +1100):
- Replaced the prior logic:
```c
if (mddev->reshape_position == MaxSector) {
conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
} else {
conf->raid_disks = mddev->raid_disks;
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
}
```
with the `BUG_ON` checks:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_size != mddev->new_chunk);
BUG_ON(mddev->delta_disks != 0);
}
```
- Prior to `91adb56473feb`, an inactive stop/restart with pending `delta_disks != 0` did not trigger a crash; `run()` simply used `mddev->raid_disks`.
- **History of Surrounding Series & Commits**:
- Directly preceding commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` ("md: make sure new_level, new_chunksize, new_layout always have sensible values.", Mar 31, 2009):
- Commit message states:
*"When an md array is undergoing a change, we have new_* fields that show the new values. When no change is happening, it is least confusing if these have the same value as the normal fields... A subsequent patch will BUG_ON if these things aren't consistent."*
- NeilBrown handled `layout_store`, `chunk_size_store`, and `do_md_run`, but completely overlooked `delta_disks` and the inactive array stop path (`mode == 2`).
- Directly succeeding commit `88ce4930e2b80378d45506ce2c3bb5820e156e85` ("md/raid5: allow layout and chunksize to be changed on active array.", Mar 31, 2009) also allowed active layout/chunk changes setting `new_*` fields prior to reshape starting.
- Refactoring history of `do_md_stop` / `__md_stop`:
- `6177b472ab14e1ac88896960370dd54ba577d926` ("md: start to refactor do_md_stop", Mar 2010): extracted `md_clean()` and `md_stop()`. In `do_md_stop`, `md_clean()` was only called if `mode == 0`.
- `5eff3c439d3478ba9e8ba5f8c0aaf6e6fadb6e58` ("md: make sure everything is freed when dm-raid stops an array", Nov 2012): renamed `md_stop()` to `__md_stop()`.
#### 2. Current Hypotheses and Leading Candidate
- **Prime Candidate**: Commit `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"").
- This commit introduced the exact assertion `BUG_ON(mddev->delta_disks != 0)` at `drivers/md/raid5.c:8117` along with `BUG_ON` for `level`, `layout`, and `chunk_size`.
- It established the assumption/invariant that `delta_disks == 0` when `reshape_position == MaxSector` upon `run()`, without ensuring that unstarted reshape states left by stopping an array to `inactive` state cleared `delta_disks`.
- Before this commit, the same sequence (changing disks, stopping array, restarting array) did not crash.
#### 3. Critical Code and Path References
- **Crash location (`drivers/md/raid5.c:8113-8118`)**:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
}
```
- **Fix location (`drivers/md/md.c:7095`) in `__md_stop()`**:
```c
static void __md_stop(struct mddev *mddev)
{
mddev_detach(mddev);
md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
if (mddev->private)
pers->free(mddev, mddev->private);
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
#### 4. Watch-outs for Next Steps
- Ensure that between `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9` and `91adb56473febeeb3ef657bb5147ddd355465700`, `91adb56473febeeb3ef657bb5147ddd355465700` is indeed the bug-introducing commit (since it introduced the faulty assertion). Avoid repetitive searching of unrelated dm-raid or md-cluster patches.
Tokens:
input: 55209
output: 2265
thoughts: 0
|
| 543/2 |
2026/09/09 21:40 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 33382
output: 34
thoughts: 1024
Thoughts: **Analyzing the RAID5 Crash in Detail**
Okay, let's break this down. We've got a crash, and the stack trace points directly to `raid5_run` at `drivers/md/raid5.c:8117`. The provided explanation states the crash is a result of a `BUG_ON` assertion: specifically, `BUG_ON(mddev->delta_disks != 0);`. My initial thought is to trace the lineage of this assertion.
First, I need to understand the context. `mddev->delta_disks` is set by the `update_raid_disks` function, introduced back in 2006. At that point, in the `run()` function, the code didn't care about `delta_disks` if `reshape_position == MaxSector`.
Then, we have the 2009 patch series by NeilBrown. This is where things get interesting. Specifically, commit `91adb56473febeeb3ef657bb5147ddd355465700` ("md/raid5: refactor raid5 "run"") seems to be the culprit. Looking at the code from that commit, that's where the `BUG_ON` assertion for `delta_disks` was *added*. We can confirm the crash report aligns with this, and line 8117 is precisely where we expect to find the assertion that failed.
So, this `BUG_ON` essentially enforces that `delta_disks` must be zero when `reshape_position == MaxSector`. This wasn't always the case, according to the code from 2006.
Now, before jumping to conclusions, I need to consider all possibilities. Could other commits be involved? For example, perhaps changes around `do_md_stop` or `array_state_store` might indirectly influence the state of `delta_disks`. The use of `"inactive"` status for arrays in these scenarios could be relevant. So, my next step is to examine the commit history, focusing on commits related to `do_md_stop` and when support for the `"inactive"` array state was added. This will help confirm or rule out other possible contributing factors.
|
| 544/2 |
2026/09/09 21:40 |
tool |
git-log |
0m
Args: map[CodeRegexp:do_md_stop.*2 PathPrefix:drivers/md/]
Results: map[Output:650b2e69ff6a md: clean up openers check in do_md_stop() and md_set_readonly()
a05b7ea03d72 md: avoid crash when stopping md array races with closing other open fds.
df5b20cf68f9 md: Better control of when do_md_stop is allowed to stop the array.
9e653b6342c9 [PATCH] md: Set/get state of array via sysfs
]
|
| 545/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 35061
output: 27
thoughts: 74
Thoughts: Here's my take:
**A Trip Down Memory Lane (and the Kernel Log)**
Okay, let's jog the old memory, shall we? *9e653b6342c9*... ah, yes, that's the one. That patch, "[PATCH] md: Set/get state of array via sysfs," was submitted ages ago, back in the Linux 2.6.16-rc2 days β 2006, if my mental calendar is correct. Always good to see that kind of system call has been around for so long.
Now, let's take a closer look at that commit hash. It's time to refresh myself on the details...
|
| 546/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 9e653b6342c94016f5cc9937061ef99e9c4b4045
Author: NeilBrown <neil@brown.name>
Date: Mon Jun 26 00:27:58 2006 -0700
[PATCH] md: Set/get state of array via sysfs
This allows the state of an md/array to be directly controlled via sysfs and
adds the ability to stop and array without tearing it down.
Array states/settings:
clear
No devices, no size, no level
Equivalent to STOP_ARRAY ioctl
inactive
May have some settings, but array is not active
all IO results in error
When written, doesn't tear down array, but just stops it
suspended (not supported yet)
All IO requests will block. The array can be reconfigured.
Writing this, if accepted, will block until array is quiescent
readonly
no resync can happen. no superblocks get written.
write requests fail
read-auto
like readonly, but behaves like 'clean' on a write request.
clean - no pending writes, but otherwise active.
When written to inactive array, starts without resync
If a write request arrives then
if metadata is known, mark 'dirty' and switch to 'active'.
if not known, block and switch to write-pending
If written to an active array that has pending writes, then fails.
active
fully active: IO and resync can be happening.
When written to inactive array, starts with resync
write-pending (not supported yet)
clean, but writes are blocked waiting for 'active' to be written.
active-idle
like active, but no writes have been seen for a while (100msec).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/md.txt b/Documentation/md.txt
index b19978e035fc..df0b45515775 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -216,6 +216,45 @@ All md devices contain:
period as a number of seconds. The default is 200msec (0.200).
Writing a value of 0 disables safemode.
+ array_state
+ This file contains a single word which describes the current
+ state of the array. In many cases, the state can be set by
+ writing the word for the desired state, however some states
+ cannot be explicitly set, and some transitions are not allowed.
+
+ clear
+ No devices, no size, no level
+ Writing is equivalent to STOP_ARRAY ioctl
+ inactive
+ May have some settings, but array is not active
+ all IO results in error
+ When written, doesn't tear down array, but just stops it
+ suspended (not supported yet)
+ All IO requests will block. The array can be reconfigured.
+ Writing this, if accepted, will block until array is quiessent
+ readonly
+ no resync can happen. no superblocks get written.
+ write requests fail
+ read-auto
+ like readonly, but behaves like 'clean' on a write request.
+
+ clean - no pending writes, but otherwise active.
+ When written to inactive array, starts without resync
+ If a write request arrives then
+ if metadata is known, mark 'dirty' and switch to 'active'.
+ if not known, block and switch to write-pending
+ If written to an active array that has pending writes, then fails.
+ active
+ fully active: IO and resync can be happening.
+ When written to inactive array, starts with resync
+
+ write-pending
+ clean, but writes are blocked waiting for 'active' to be written.
+
+ active-idle
+ like active, but no writes have been seen for a while (safe_mode_delay).
+
+
sync_speed_min
sync_speed_max
This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 34b6902cda46..f6562ee4c6fc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2185,6 +2185,176 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
static struct md_sysfs_entry md_chunk_size =
__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
+/*
+ * The array state can be:
+ *
+ * clear
+ * No devices, no size, no level
+ * Equivalent to STOP_ARRAY ioctl
+ * inactive
+ * May have some settings, but array is not active
+ * all IO results in error
+ * When written, doesn't tear down array, but just stops it
+ * suspended (not supported yet)
+ * All IO requests will block. The array can be reconfigured.
+ * Writing this, if accepted, will block until array is quiessent
+ * readonly
+ * no resync can happen. no superblocks get written.
+ * write requests fail
+ * read-auto
+ * like readonly, but behaves like 'clean' on a write request.
+ *
+ * clean - no pending writes, but otherwise active.
+ * When written to inactive array, starts without resync
+ * If a write request arrives then
+ * if metadata is known, mark 'dirty' and switch to 'active'.
+ * if not known, block and switch to write-pending
+ * If written to an active array that has pending writes, then fails.
+ * active
+ * fully active: IO and resync can be happening.
+ * When written to inactive array, starts with resync
+ *
+ * write-pending
+ * clean, but writes are blocked waiting for 'active' to be written.
+ *
+ * active-idle
+ * like active, but no writes have been seen for a while (100msec).
+ *
+ */
+enum array_state { clear, inactive, suspended, readonly, read_auto, clean, active,
+ write_pending, active_idle, bad_word};
+char *array_states[] = {
+ "clear", "inactive", "suspended", "readonly", "read-auto", "clean", "active",
+ "write-pending", "active-idle", NULL };
+
+static int match_word(const char *word, char **list)
+{
+ int n;
+ for (n=0; list[n]; n++)
+ if (cmd_match(word, list[n]))
+ break;
+ return n;
+}
+
+static ssize_t
+array_state_show(mddev_t *mddev, char *page)
+{
+ enum array_state st = inactive;
+
+ if (mddev->pers)
+ switch(mddev->ro) {
+ case 1:
+ st = readonly;
+ break;
+ case 2:
+ st = read_auto;
+ break;
+ case 0:
+ if (mddev->in_sync)
+ st = clean;
+ else if (mddev->safemode)
+ st = active_idle;
+ else
+ st = active;
+ }
+ else {
+ if (list_empty(&mddev->disks) &&
+ mddev->raid_disks == 0 &&
+ mddev->size == 0)
+ st = clear;
+ else
+ st = inactive;
+ }
+ return sprintf(page, "%s\n", array_states[st]);
+}
+
+static int do_md_stop(mddev_t * mddev, int ro);
+static int do_md_run(mddev_t * mddev);
+static int restart_array(mddev_t *mddev);
+
+static ssize_t
+array_state_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ int err = -EINVAL;
+ enum array_state st = match_word(buf, array_states);
+ switch(st) {
+ case bad_word:
+ break;
+ case clear:
+ /* stopping an active array */
+ if (mddev->pers) {
+ if (atomic_read(&mddev->active) > 1)
+ return -EBUSY;
+ err = do_md_stop(mddev, 0);
+ }
+ break;
+ case inactive:
+ /* stopping an active array */
+ if (mddev->pers) {
+ if (atomic_read(&mddev->active) > 1)
+ return -EBUSY;
+ err = do_md_stop(mddev, 2);
+ }
+ break;
+ case suspended:
+ break; /* not supported yet */
+ case readonly:
+ if (mddev->pers)
+ err = do_md_stop(mddev, 1);
+ else {
+ mddev->ro = 1;
+ err = do_md_run(mddev);
+ }
+ break;
+ case read_auto:
+ /* stopping an active array */
+ if (mddev->pers) {
+ err = do_md_stop(mddev, 1);
+ if (err == 0)
+ mddev->ro = 2; /* FIXME mark devices writable */
+ } else {
+ mddev->ro = 2;
+ err = do_md_run(mddev);
+ }
+ break;
+ case clean:
+ if (mddev->pers) {
+ restart_array(mddev);
+ spin_lock_irq(&mddev->write_lock);
+ if (atomic_read(&mddev->writes_pending) == 0) {
+ mddev->in_sync = 1;
+ mddev->sb_dirty = 1;
+ }
+ spin_unlock_irq(&mddev->write_lock);
+ } else {
+ mddev->ro = 0;
+ mddev->recovery_cp = MaxSector;
+ err = do_md_run(mddev);
+ }
+ break;
+ case active:
+ if (mddev->pers) {
+ restart_array(mddev);
+ mddev->sb_dirty = 0;
+ wake_up(&mddev->sb_wait);
+ err = 0;
+ } else {
+ mddev->ro = 0;
+ err = do_md_run(mddev);
+ }
+ break;
+ case write_pending:
+ case active_idle:
+ /* these cannot be set */
+ break;
+ }
+ if (err)
+ return err;
+ else
+ return len;
+}
+static struct md_sysfs_entry md_array_state = __ATTR(array_state, 0644, array_state_show, array_state_store);
+
static ssize_t
null_show(mddev_t *mddev, char *page)
{
@@ -2553,6 +2723,7 @@ static struct attribute *md_default_attrs[] = {
&md_metadata.attr,
&md_new_device.attr,
&md_safe_delay.attr,
+ &md_array_state.attr,
NULL,
};
@@ -2919,11 +3090,8 @@ static int restart_array(mddev_t *mddev)
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread);
err = 0;
- } else {
- printk(KERN_ERR "md: %s has no personality assigned.\n",
- mdname(mddev));
+ } else
err = -EINVAL;
- }
out:
return err;
@@ -2955,7 +3123,12 @@ static void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
-static int do_md_stop(mddev_t * mddev, int ro)
+/* mode:
+ * 0 - completely stop and dis-assemble array
+ * 1 - switch to readonly
+ * 2 - stop but do not disassemble array
+ */
+static int do_md_stop(mddev_t * mddev, int mode)
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
@@ -2977,12 +3150,15 @@ static int do_md_stop(mddev_t * mddev, int ro)
invalidate_partition(disk, 0);
- if (ro) {
+ switch(mode) {
+ case 1: /* readonly */
err = -ENXIO;
if (mddev->ro==1)
goto out;
mddev->ro = 1;
- } else {
+ break;
+ case 0: /* disassemble */
+ case 2: /* stop */
bitmap_flush(mddev);
md_super_wait(mddev);
if (mddev->ro)
@@ -3002,7 +3178,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
mddev->in_sync = 1;
md_update_sb(mddev);
}
- if (ro)
+ if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
@@ -3010,7 +3186,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
/*
* Free resources if final stop
*/
- if (!ro) {
+ if (mode == 0) {
mdk_rdev_t *rdev;
struct list_head *tmp;
struct gendisk *disk;
@@ -3034,6 +3210,9 @@ static int do_md_stop(mddev_t * mddev, int ro)
export_array(mddev);
mddev->array_size = 0;
+ mddev->size = 0;
+ mddev->raid_disks = 0;
+
disk = mddev->gendisk;
if (disk)
set_capacity(disk, 0);
]
|
| 547/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 39169
output: 50
thoughts: 292
Thoughts: **Analyzing the `md` RAID Code's Evolution**
Okay, so I'm digging into this old `md` RAID code. It looks like `do_md_stop(mddev, 2)` came in back in '06, with that commit `9e653b6342c9`. And back then, stopping with mode 2 detached the personality and cleaned up the private data. Makes sense. Then, restarting the array with `do_md_run` would call the `raid5`'s `run()` function.
The interesting thing is, in 2006, `run()` *didn't* crash. And the reason is clear: it didn't have that `BUG_ON(mddev->delta_disks != 0);` check that we're seeing now. That `BUG_ON` was introduced later, specifically in 2009, with commit `91adb56473febeeb3ef657bb5147ddd355465700` in `drivers/md/raid5.c`. That's a crucial point.
Hang on, let me quickly double-check that earlier commit, `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`. I need to make sure I haven't missed something in its context. What did *that* change exactly? Just want to be absolutely certain of the timeline and impact.
|
| 548/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args: map[Commit:34817e8c3948ea20316dfa8fd8947d6d0ee82ba9]
Results: map[Output:commit 34817e8c3948ea20316dfa8fd8947d6d0ee82ba9
Author: NeilBrown <neil@brown.name>
Date: Tue Mar 31 14:39:38 2009 +1100
md: make sure new_level, new_chunksize, new_layout always have sensible values.
When an md array is undergoing a change, we have new_* fields that
show the new values.
When no change is happening, it is least confusing if these have
the same value as the normal fields.
This is true in most cases, but not when the values are set via sysfs.
So fix this up.
A subsequent patch will BUG_ON if these things aren't consistent.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 07ab6790e29d..117ea5fde568 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2633,9 +2633,9 @@ layout_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- if (mddev->reshape_position != MaxSector)
- mddev->new_layout = n;
- else
+
+ mddev->new_layout = n;
+ if (mddev->reshape_position == MaxSector)
mddev->layout = n;
return len;
}
@@ -2702,9 +2702,9 @@ chunk_size_store(mddev_t *mddev, const char *buf, size_t len)
if (mddev->pers)
return -EBUSY;
- else if (mddev->reshape_position != MaxSector)
- mddev->new_chunk = n;
- else
+
+ mddev->new_chunk = n;
+ if (mddev->reshape_position == MaxSector)
mddev->chunk_size = n;
return len;
}
@@ -3831,7 +3831,10 @@ static int do_md_run(mddev_t * mddev)
}
mddev->pers = pers;
spin_unlock(&pers_lock);
- mddev->level = pers->level;
+ if (mddev->level != pers->level) {
+ mddev->level = pers->level;
+ mddev->new_level = pers->level;
+ }
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (pers->level >= 4 && pers->level <= 6)
]
|
| 549/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 40605
output: 51
thoughts: 565
Thoughts: **Analyzing a RAID Reshape Fix**
Okay, let's break this down. I'm looking at commit `34817e8c3948ea20316dfa8fd8947d6d0ee82ba9`, which hints at a consistency check in a later patch. Sure enough, that's `91adb56473febeeb3ef657bb5147ddd355465700`. This patch is the key: it introduces several `BUG_ON` checks within a conditional block. Specifically, it asserts the consistency of `mddev->level`, `mddev->layout`, `mddev->chunk_size` (actually `mddev->chunk_sectors`), and importantly, `mddev->delta_disks`.
Looking at the subsequent fix, the `__md_stop()` function is being modified. Now, when `mddev->reshape_position` reaches `MaxSector`, it resets `delta_disks`, along with other reshape parameters: `reshape_backwards`, `new_level`, `new_layout`, and `new_chunk_sectors`. This makes perfect sense; those reset values are what make the `BUG_ON` checks in `91adb56473febeeb3ef657bb5147ddd355465700` *not* trigger when the RAID is restarted and executes `raid5_run()`. The fix prepares for a clean restart.
Now, a quick sanity check: Was there another potential culprit? When was `md_clean()` introduced? Knowing what it does and when it was introduced could provide more context for the fix.
|
| 550/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args: map[Commit:6177b472ab14e1ac88896960370dd54ba577d926]
Results: map[Output:commit 6177b472ab14e1ac88896960370dd54ba577d926
Author: NeilBrown <neil@brown.name>
Date: Mon Mar 29 11:37:13 2010 +1100
md: start to refactor do_md_stop
do_md_stop is large and clunky, so hard to understand.
This is a first step of refactoring, pulling two simple
sub-functions out.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e752332268d2..002d0a34d6ea 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4568,6 +4568,58 @@ void restore_bitmap_write_access(struct file *file)
spin_unlock(&inode->i_lock);
}
+static void md_clean(mddev_t *mddev)
+{
+ mddev->array_sectors = 0;
+ mddev->external_size = 0;
+ mddev->dev_sectors = 0;
+ mddev->raid_disks = 0;
+ mddev->recovery_cp = 0;
+ mddev->resync_min = 0;
+ mddev->resync_max = MaxSector;
+ mddev->reshape_position = MaxSector;
+ mddev->external = 0;
+ mddev->persistent = 0;
+ mddev->level = LEVEL_NONE;
+ mddev->clevel[0] = 0;
+ mddev->flags = 0;
+ mddev->ro = 0;
+ mddev->metadata_type[0] = 0;
+ mddev->chunk_sectors = 0;
+ mddev->ctime = mddev->utime = 0;
+ mddev->layout = 0;
+ mddev->max_disks = 0;
+ mddev->events = 0;
+ mddev->delta_disks = 0;
+ mddev->new_level = LEVEL_NONE;
+ mddev->new_layout = 0;
+ mddev->new_chunk_sectors = 0;
+ mddev->curr_resync = 0;
+ mddev->resync_mismatches = 0;
+ mddev->suspend_lo = mddev->suspend_hi = 0;
+ mddev->sync_speed_min = mddev->sync_speed_max = 0;
+ mddev->recovery = 0;
+ mddev->in_sync = 0;
+ mddev->degraded = 0;
+ mddev->barriers_work = 0;
+ mddev->safemode = 0;
+ mddev->bitmap_info.offset = 0;
+ mddev->bitmap_info.default_offset = 0;
+ mddev->bitmap_info.chunksize = 0;
+ mddev->bitmap_info.daemon_sleep = 0;
+ mddev->bitmap_info.max_write_behind = 0;
+}
+
+static void md_stop(mddev_t *mddev)
+{
+ mddev->pers->stop(mddev);
+ if (mddev->pers->sync_request && mddev->to_remove == NULL)
+ mddev->to_remove = &md_redundancy_group;
+ module_put(mddev->pers->owner);
+ mddev->pers = NULL;
+
+}
+
/* mode:
* 0 - completely stop and dis-assemble array
* 1 - switch to readonly
@@ -4608,14 +4660,11 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
if (mddev->ro)
set_disk_ro(disk, 0);
- mddev->pers->stop(mddev);
+ md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- module_put(mddev->pers->owner);
- if (mddev->pers->sync_request && mddev->to_remove == NULL)
- mddev->to_remove = &md_redundancy_group;
- mddev->pers = NULL;
+
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4663,44 +4712,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
export_array(mddev);
- mddev->array_sectors = 0;
- mddev->external_size = 0;
- mddev->dev_sectors = 0;
- mddev->raid_disks = 0;
- mddev->recovery_cp = 0;
- mddev->resync_min = 0;
- mddev->resync_max = MaxSector;
- mddev->reshape_position = MaxSector;
- mddev->external = 0;
- mddev->persistent = 0;
- mddev->level = LEVEL_NONE;
- mddev->clevel[0] = 0;
- mddev->flags = 0;
- mddev->ro = 0;
- mddev->metadata_type[0] = 0;
- mddev->chunk_sectors = 0;
- mddev->ctime = mddev->utime = 0;
- mddev->layout = 0;
- mddev->max_disks = 0;
- mddev->events = 0;
- mddev->delta_disks = 0;
- mddev->new_level = LEVEL_NONE;
- mddev->new_layout = 0;
- mddev->new_chunk_sectors = 0;
- mddev->curr_resync = 0;
- mddev->resync_mismatches = 0;
- mddev->suspend_lo = mddev->suspend_hi = 0;
- mddev->sync_speed_min = mddev->sync_speed_max = 0;
- mddev->recovery = 0;
- mddev->in_sync = 0;
- mddev->degraded = 0;
- mddev->barriers_work = 0;
- mddev->safemode = 0;
- mddev->bitmap_info.offset = 0;
- mddev->bitmap_info.default_offset = 0;
- mddev->bitmap_info.chunksize = 0;
- mddev->bitmap_info.daemon_sleep = 0;
- mddev->bitmap_info.max_write_behind = 0;
+ md_clean(mddev);
kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
if (mddev->hold_active == UNTIL_STOP)
mddev->hold_active = 0;
]
|
| 551/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 43490
output: 40
thoughts: 114
Thoughts: **Analyzing the Code's Evolution**
Okay, so I'm diving into this commit, specifically `6177b472ab14e1ac88896960370dd54ba577d926`, and something's immediately jumping out at me. I'm seeing all these lines setting `mddev->... = 0`, specifically related to `mddev`'s properties, all bunched up within an `if (mode == 0)` block *before* this commit.
This begs the question: when were those specific lines introduced into that conditional block? Knowing the exact history of these lines will provide critical context. I need to understand why these initializations were tied to `mode == 0`. It's likely related to how the RAID device is being set up. I'm going to run a `git log` command to trace the introduction of those specific lines. I'll use the search string `-S "mddev->delta_disks = 0"` and focus the search on the relevant file, `drivers/md/md.c`. This should reveal the commit or commits that introduced those initializations and hopefully shed some light on the design decisions behind them. With this historical information, I can better understand the current code.
|
| 552/2 |
2026/09/09 21:41 |
tool |
git-log |
0m
Args: map[CodeRegexp:mddev->delta_disks = 0 PathPrefix:drivers/md/md.c]
Results: map[Output:db721d32b74b md: level_store: group all important changes into one place.
de171cb9a525 md: revert change to raid_disks on failure.
6177b472ab14 md: start to refactor do_md_stop
245f46c2c221 md: add ->takeover method to support changing the personality managing an array
d897dbf91490 md: reinitialise more mddev fields in do_md_stop.
08a02ecd28ba md: allow reshape_position for md arrays to be set via sysfs
f67055780caa [PATCH] md: Checkpoint and allow restart of raid5 reshape
]
|
| 553/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 44112
output: 26
thoughts: 18
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person:
**Initial Assessment: Code Hash `d897dbf91490`**
Alright, let's dive in. My immediate instinct is to treat this `d897dbf91490` as a potential key artifact. I'm seeing this as either a commit hash, a file identifier, or perhaps even a unique ID related to a specific data record, object in memory, or a database entry, depending on the context I'm working in. The hexadecimal format is a standard indicator for something machine readable and likely representing a unique point of information. I want to know more! My mind immediately starts running through mental models: Where did this come from? What systems are we dealing with? What frameworks might have generated it?
|
| 554/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args:
Results: map[Output:commit d897dbf91490f26dccef3d7056ffd09eb83a15a5
Author: NeilBrown <neil@brown.name>
Date: Wed Apr 30 00:52:29 2008 -0700
md: reinitialise more mddev fields in do_md_stop.
I keep finding problems where an mddev gets reused and some fields has a value
from a previous usage that confuses the new usage. So clear all fields that
could possible need clearing when calling do_md_stop.
Also initialise the 'level' of a new array to LEVEL_NONE (which isn't 0).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 61767f1962eb..7a44c81ae3cd 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -276,6 +276,7 @@ static mddev_t * mddev_find(dev_t unit)
init_waitqueue_head(&new->sb_wait);
new->reshape_position = MaxSector;
new->resync_max = MaxSector;
+ new->level = LEVEL_NONE;
new->queue = blk_alloc_queue(GFP_KERNEL);
if (!new->queue) {
@@ -3714,6 +3715,30 @@ static int do_md_stop(mddev_t * mddev, int mode)
mddev->reshape_position = MaxSector;
mddev->external = 0;
mddev->persistent = 0;
+ mddev->level = LEVEL_NONE;
+ mddev->clevel[0] = 0;
+ mddev->flags = 0;
+ mddev->ro = 0;
+ mddev->metadata_type[0] = 0;
+ mddev->chunk_size = 0;
+ mddev->ctime = mddev->utime = 0;
+ mddev->layout = 0;
+ mddev->max_disks = 0;
+ mddev->events = 0;
+ mddev->delta_disks = 0;
+ mddev->new_level = LEVEL_NONE;
+ mddev->new_layout = 0;
+ mddev->new_chunk = 0;
+ mddev->curr_resync = 0;
+ mddev->resync_mismatches = 0;
+ mddev->suspend_lo = mddev->suspend_hi = 0;
+ mddev->sync_speed_min = mddev->sync_speed_max = 0;
+ mddev->recovery = 0;
+ mddev->in_sync = 0;
+ mddev->changed = 0;
+ mddev->degraded = 0;
+ mddev->barriers_work = 0;
+ mddev->safemode = 0;
} else if (mddev->pers)
printk(KERN_INFO "md: %s switched to read-only mode.\n",
]
|
| 555/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 45223
output: 25
thoughts: 403
Thoughts: **My Analysis of the mddev Reuse Bug Fix**
Okay, so I'm looking back at this old `d897dbf91490` commit from 2008. The core of the problem, as I recall, was this recurring issue where an `mddev` structure was being reused, but remnants of its previous configuration were causing headaches for its new usage. The fix targeted the `do_md_stop` function, aiming to clear any fields that *could* potentially cause confusion in a subsequent initialization. The problem was that the code was only clearing the fields if the `mode` was set to zero β essentially, a full stop or disassemble.
Now, I'm specifically thinking about how the `raid5` driver was handling this in 2008. The `run()` function had this snippet:
```c
if (mddev->reshape_position == MaxSector) {
conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
} else {
conf->raid_disks = mddev->raid_disks;
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
}
```
What's striking is that there wasn't any sort of safeguard, no `BUG_ON` checks, right in `raid5.c` at that point in time. It was left to the general cleaning to ensure correct behavior.
Then, the situation changed in 2009 with NeilBrown's commit `91adb56473febeeb3ef657bb5147ddd355465700`. He introduced these important checks:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_size != mddev->new_chunk);
BUG_ON(mddev->delta_disks != 0);
}
```
These checks were a good addition, and they look like they were designed to catch the very type of stale configuration data issues that were being exposed by the original fix. Now, before I jump to any conclusions, I should probably also examine `de171cb9a525` and `db721d32b74b` to see what additional context or changes they introduced. Context is important.
|
| 556/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args:
Results: map[Output:commit de171cb9a52598cc023adceafc6c166112401386
Author: NeilBrown <neil@brown.name>
Date: Mon Jan 31 11:57:42 2011 +1100
md: revert change to raid_disks on failure.
If we try to update_raid_disks and it fails, we should put
'delta_disks' back to zero. This is important because some code,
such as slot_store, assumes that delta_disks has been validated.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b76cfc89e1b5..e636e404e9a5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5578,6 +5578,8 @@ static int update_raid_disks(mddev_t *mddev, int raid_disks)
mddev->delta_disks = raid_disks - mddev->raid_disks;
rv = mddev->pers->check_reshape(mddev);
+ if (rv < 0)
+ mddev->delta_disks = 0;
return rv;
}
]
|
| 557/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 46587
output: 26
thoughts: 85
Thoughts: Here's my summary, as I see it:
**Ensuring Data Integrity During RAID Disk Updates**
Okay, let's dissect this. I'm focusing on these commits, specifically `de171cb9a525`. My primary concern is handling a potentially failed `update_raid_disks` operation. The critical takeaway here is the need to revert `delta_disks` to zero if the update fails. This isn't just a nicety; it's fundamental. Certain routines, namely the `slot_store` function, rely on a validated state for `delta_disks`. If the update bombs out and we leave `delta_disks` in an unverified state, we're setting ourselves up for data corruption and unpredictable behavior down the line. We must maintain data consistency. Now, let me scrutinize `db721d32b74b` to see how this is applied in practice. I need to understand the implications on the RAID configuration.
|
| 558/2 |
2026/09/09 21:41 |
tool |
git-show |
0m
Args:
Results: map[Output:commit db721d32b74b51a5ac9ec9fab1d85cba90dbdbd3
Author: NeilBrown <neil@brown.name>
Date: Mon Dec 15 12:56:58 2014 +1100
md: level_store: group all important changes into one place.
Gather all the changes that can happen atomically and might
be relevant to other code into one place. This will
make it easier to refine the locking.
Note that this puts quite a few things between mddev_detach()
and ->free(). Enabling this was the point of some recent patches.
Signed-off-by: NeilBrown <neilb@suse.de>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 2920fd004865..58f531f8dcc2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3280,9 +3280,9 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
{
char clevel[16];
ssize_t rv = len;
- struct md_personality *pers;
+ struct md_personality *pers, *oldpers;
long level;
- void *priv;
+ void *priv, *oldpriv;
struct md_rdev *rdev;
if (mddev->pers == NULL) {
@@ -3374,9 +3374,35 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
/* Looks like we have a winner */
mddev_suspend(mddev);
mddev_detach(mddev);
- mddev->pers->free(mddev, mddev->private);
+ oldpers = mddev->pers;
+ oldpriv = mddev->private;
+ mddev->pers = pers;
+ mddev->private = priv;
+ strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
+ mddev->level = mddev->new_level;
+ mddev->layout = mddev->new_layout;
+ mddev->chunk_sectors = mddev->new_chunk_sectors;
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->degraded = 0;
+
+ if (oldpers->sync_request == NULL &&
+ mddev->external) {
+ /* We are converting from a no-redundancy array
+ * to a redundancy array and metadata is managed
+ * externally so we need to be sure that writes
+ * won't block due to a need to transition
+ * clean->dirty
+ * until external management is started.
+ */
+ mddev->in_sync = 0;
+ mddev->safemode_delay = 0;
+ mddev->safemode = 0;
+ }
- if (mddev->pers->sync_request == NULL &&
+ oldpers->free(mddev, oldpriv);
+
+ if (oldpers->sync_request == NULL &&
pers->sync_request != NULL) {
/* need to add the md_redundancy_group */
if (sysfs_create_group(&mddev->kobj, &md_redundancy_group))
@@ -3385,27 +3411,13 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
mdname(mddev));
mddev->sysfs_action = sysfs_get_dirent(mddev->kobj.sd, "sync_action");
}
- if (mddev->pers->sync_request != NULL &&
+ if (oldpers->sync_request != NULL &&
pers->sync_request == NULL) {
/* need to remove the md_redundancy_group */
if (mddev->to_remove == NULL)
mddev->to_remove = &md_redundancy_group;
}
- if (mddev->pers->sync_request == NULL &&
- mddev->external) {
- /* We are converting from a no-redundancy array
- * to a redundancy array and metadata is managed
- * externally so we need to be sure that writes
- * won't block due to a need to transition
- * clean->dirty
- * until external management is started.
- */
- mddev->in_sync = 0;
- mddev->safemode_delay = 0;
- mddev->safemode = 0;
- }
-
rdev_for_each(rdev, mddev) {
if (rdev->raid_disk < 0)
continue;
@@ -3431,17 +3443,7 @@ level_store(struct mddev *mddev, const char *buf, size_t len)
}
}
- module_put(mddev->pers->owner);
- mddev->pers = pers;
- mddev->private = priv;
- strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
- mddev->level = mddev->new_level;
- mddev->layout = mddev->new_layout;
- mddev->chunk_sectors = mddev->new_chunk_sectors;
- mddev->delta_disks = 0;
- mddev->reshape_backwards = 0;
- mddev->degraded = 0;
- if (mddev->pers->sync_request == NULL) {
+ if (pers->sync_request == NULL) {
/* this is now an array without redundancy, so
* it must always be in_sync
*/
]
|
| 559/2 |
2026/09/09 21:41 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 48441
output: 37
thoughts: 294
Thoughts: **Analyzing the `__md_stop` Function**
Okay, so I'm looking at this patch and it touches `__md_stop(mddev)`. That's the entry point, it seems. Let's see what's happening within this function... `mddev_detach(mddev)`, right, that makes sense. Then we flush the `event_work` queue. Good. Now, spinlock and nulling out `mddev->pers`. Freeing `mddev->private` and putting `pers`. And finally, clearing the `MD_RECOVERY_FROZEN` bit. Standard stuff for stopping a device.
But hold on a second... what's this `if (mddev->reshape_position == MaxSector)` block? That seems new. So, we're resetting `delta_disks`, `reshape_backwards`, and setting `new_level`, `new_layout`, and `new_chunk_sectors` to their current values. This looks like we're resetting reshape parameters at the end of a reshape operation.
The core of the patch seems to be around this reshape cleanup. I need to understand what triggers this `__md_stop` call, because I'm not seeing it explicitly defined in this block. Let's trace back from `__md_stop` to see *where* this function is being called from. That should give me the context I need to fully grok the intent and implications of this patch.
|
| 560/2 |
2026/09/09 21:42 |
tool |
git-log |
0m
Error:
Args: map[Count:5 PathPrefix:drivers/md/md.c SymbolName:__md_stop]
Results:
|
| 561/2 |
2026/09/09 21:42 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 49107
output: 37
thoughts: 14
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Thinking Through Git Log Integration**
Okay, so I'm thinking about how to integrate `git log` with our system. The core issue, as always, is granularity and efficient data retrieval. My immediate thought is to use `git log` with two key pieces of information: the `SymbolName` and the `SourcePath`. This pairing is crucial. We can use the symbol name as the primary filter, allowing us to hone in on commits that potentially touch the code related to that specific function or class. The source path then becomes an additional layer of refinement β it allows us to narrow the scope within the repository, ensuring we're only looking at changes within the relevant directory structure. This avoids false positives and limits the amount of data we need to process, especially with larger codebases. The next step is to consider how we'll parse the output effectively and build the relevant data structures to represent the commit history within our system, but first, let's get a good picture of the data from git.
|
| 562/2 |
2026/09/09 21:42 |
tool |
git-log |
0m
Args: map[Count:5 SourcePath:drivers/md/md.c SymbolName:__md_stop]
Results: map[Output:cefcb9297fbd md raid: fix hang when stopping arrays with metadata through dm-raid
10787568cc1f md: merge mddev serialize_policy into mddev_flags
26292657add3 md: check before referencing mddev->bitmap_ops
8fa7292fee5c treewide: Switch/rename to timer_delete[_sync]()
ca925302e841 md/md-bitmap: merge md_bitmap_flush() into bitmap_operations
]
|
| 563/2 |
2026/09/09 21:42 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 49519
output: 40
thoughts: 1331
Thoughts: **Analyzing the `mddev` Stop/Restart Crash in RAID5**
Okay, so here's what I've got. The crash occurs when stopping and restarting a RAID5 array after modifying the `raid_disks` attribute (or `level`, `layout` or `chunk_size`) while it's active but before any reshape actually starts, and that's linked to the `BUG_ON(mddev->delta_disks != 0)` assertion in `raid5_run()`.
The flow is: `__md_stop` is the core function to stop an active personality, called by `do_md_stop()`. When stopping the array (`mode == 2`, i.e., `inactive`), `do_md_stop` calls `__md_stop`. Crucially, before the `91adb56473febeeb3ef657bb5147ddd355465700` commit, this didn't cause a crash.
The `BUG_ON` in `raid5_run` comes into play. I need to understand why it was added. Let's trace it back.
I see that before commit `91adb56473febeeb3ef657bb5147ddd355465700`, `raid5_run` would calculate the number of disks based on whether a reshape was in progress (`mddev->reshape_position != MaxSector`). If no reshape was happening, it simply used the current `mddev->raid_disks` value without caring about any potential changes. It appears there was no check on `mddev->delta_disks`.
Then, along comes NeilBrown and adds those `BUG_ON` statements, including the one that causes the crash: `BUG_ON(mddev->delta_disks != 0)`. He was working on making sure the `new_*` values were consistent with the normal fields when no changes were taking place. The explanation for the fix confirms it: if changes were made to the `raid_disks`, `level`, `layout`, or `chunk_size` while the array was active, these pending changes would be discarded.
So, here's what's happening. The `update_raid_disks()` function, called when modifying the `raid_disks` attribute, *sets* `mddev->delta_disks` to the difference between the desired and current number of disks *while the array is still active*. But the `reshape_position` is only set when the reshape actually begins. Thus, if the array is stopped before `raid5_start_reshape()` is called (the `array_state` transitions to `inactive`), `__md_stop()` gets called, but it doesn't clear `delta_disks`, nor does it reset the `new_*` fields to their "normal" values.
This means that when the array restarts, `raid5_run()` is called, and that's when the `BUG_ON` fires because `delta_disks` is not zero, and the kernel crashes!
NeilBrown's assumption was that `delta_disks` would be zero unless a reshape was in progress, but the code didn't actually enforce that. Now, I need to look if some other commit might have influenced the behavior of the sysfs interface and, thus, contributed to this problem by breaking the assumption, which is what I'm going to look for in the git logs.
|
| 564/2 |
2026/09/09 21:42 |
tool |
git-log |
0m
Args: map[Count:10 SourcePath:drivers/md/md.c SymbolName:update_raid_disks]
Results: map[Output:fd01b88c75a7 md: remove typedefs: mddev_t -> struct mddev
da943b9912df [PATCH] md: allow md/raid_disks to be settable
96de1e663cda [PATCH] md: fix some locking and module refcounting issues with md's use of sysfs
eae1701fbd26 [PATCH] md: initial sysfs support for md
]
|
| 565/2 |
2026/09/09 21:42 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 51764
output: 25
thoughts: 16
Thoughts: Okay, here's my interpretation of that thought process, assuming I'm the expert:
**Investigating a Specific Commit**
Alright, I see a commit hash: `da943b9912df`. My immediate thought is, "Let's dive into that one." This likely means something flagged my attention, either through a bug report, a review comment, or perhaps a routine code audit. My experience has taught me that these hash codes are the keys to understanding changes, and now I'm ready to unlock the story they tell. I'll need to recall which system this is a part of and what processes would be affected to fully understand the effects of this change. From here, I'll need to determine the best method to view the commit and its files and get a holistic view of the implications of these changes.
|
| 566/2 |
2026/09/09 21:42 |
tool |
git-show |
0m
Args:
Results: map[Output:commit da943b9912df063322d37b1a1f285460531d481d
Author: NeilBrown <neil@brown.name>
Date: Fri Jan 6 00:20:54 2006 -0800
[PATCH] md: allow md/raid_disks to be settable
If array is active, try to reshape, else just set the value.
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/md.txt b/Documentation/md.txt
index a3eadf8e1701..69f742dee00f 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -165,6 +165,9 @@ All md devices contain:
in a fully functional array. If this is not yet known, the file
will be empty. If an array is being resized (not currently
possible) this will contain the larger of the old and new sizes.
+ Some raid level (RAID1) allow this value to be set while the
+ array is active. This will reconfigure the array. Otherwise
+ it can only be set while assembling an array.
chunk_size
This is the size if bytes for 'chunks' and is only relevant to
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 32a4e2311e43..86e9f2efae5c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1843,7 +1843,27 @@ raid_disks_show(mddev_t *mddev, char *page)
return sprintf(page, "%d\n", mddev->raid_disks);
}
-static struct md_sysfs_entry md_raid_disks = __ATTR_RO(raid_disks);
+static int update_raid_disks(mddev_t *mddev, int raid_disks);
+
+static ssize_t
+raid_disks_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ /* can only set raid_disks if array is not yet active */
+ char *e;
+ int rv = 0;
+ unsigned long n = simple_strtoul(buf, &e, 10);
+
+ if (!*buf || (*e && *e != '\n'))
+ return -EINVAL;
+
+ if (mddev->pers)
+ rv = update_raid_disks(mddev, n);
+ else
+ mddev->raid_disks = n;
+ return rv ? rv : len;
+}
+static struct md_sysfs_entry md_raid_disks =
+__ATTR(raid_disks, 0644, raid_disks_show, raid_disks_store);
static ssize_t
chunk_size_show(mddev_t *mddev, char *page)
@@ -3201,6 +3221,33 @@ static int update_size(mddev_t *mddev, unsigned long size)
return rv;
}
+static int update_raid_disks(mddev_t *mddev, int raid_disks)
+{
+ int rv;
+ /* change the number of raid disks */
+ if (mddev->pers->reshape == NULL)
+ return -EINVAL;
+ if (raid_disks <= 0 ||
+ raid_disks >= mddev->max_disks)
+ return -EINVAL;
+ if (mddev->sync_thread)
+ return -EBUSY;
+ rv = mddev->pers->reshape(mddev, raid_disks);
+ if (!rv) {
+ struct block_device *bdev;
+
+ bdev = bdget_disk(mddev->gendisk, 0);
+ if (bdev) {
+ down(&bdev->bd_inode->i_sem);
+ i_size_write(bdev->bd_inode, mddev->array_size << 10);
+ up(&bdev->bd_inode->i_sem);
+ bdput(bdev);
+ }
+ }
+ return rv;
+}
+
+
/*
* update_array_info is used to change the configuration of an
* on-line array.
@@ -3252,28 +3299,9 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
if (mddev->size != info->size)
rv = update_size(mddev, info->size);
- if (mddev->raid_disks != info->raid_disks) {
- /* change the number of raid disks */
- if (mddev->pers->reshape == NULL)
- return -EINVAL;
- if (info->raid_disks <= 0 ||
- info->raid_disks >= mddev->max_disks)
- return -EINVAL;
- if (mddev->sync_thread)
- return -EBUSY;
- rv = mddev->pers->reshape(mddev, info->raid_disks);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- down(&bdev->bd_inode->i_sem);
- i_size_write(bdev->bd_inode, mddev->array_size << 10);
- up(&bdev->bd_inode->i_sem);
- bdput(bdev);
- }
- }
- }
+ if (mddev->raid_disks != info->raid_disks)
+ rv = update_raid_disks(mddev, info->raid_disks);
+
if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) {
if (mddev->pers->quiesce == NULL)
return -EINVAL;
]
|
| 567/2 |
2026/09/09 21:42 |
llm |
fixes-finder |
0m
Model:
Tokens:
input: 53640
output: 48
thoughts: 888
Thoughts: **Bug Hunt: RAID5 Reshape and Inactivation**
Okay, let's break this down systematically. I need to understand what's happening with this RAID5 array reshaping and the issue that we've found.
First, I'm checking `raid_disks_store`. I know that when it's active, it's calling `update_raid_disks`. I have to trace back what `update_raid_disks` does. Ah, there it is β the modification in commit `63c70c4f3a30e77e6f445bd16eff7934a031ebd3` back in 2006. That change introduced the core behavior: writing to `raid_disks` while the array is running sets `mddev->delta_disks = raid_disks - mddev->raid_disks;`.
Next, I need to understand the implications, specifically inside `raid5_check_reshape`. Okay, it checks `delta_disks` is not negative and that the system has enough memory. Good. It allocates stripes and returns zero. Now, `mddev->delta_disks` remains set to non-zero. The crucial part is that the reshape *doesn't* actually start until the `sync_action` is set to "reshape" (or `start_reshape` is called).
Now, the vulnerability is beginning to surface: if a user sets `array_state` to "inactive" during this window, `do_md_stop(mddev, 2)` gets called, which invokes `__md_stop(mddev)`.
Here's the problem: *before* commit `91adb56473febeeb3ef657bb5147ddd355465700`, restarting the array via `array_state` -> "active" would call `run()`. Because `reshape_position` was at `MaxSector` in this vulnerable state, `conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;` was set, and things would proceed without error! But now, this has been changed...
Here's the smoking gun: commit `91adb56473febeeb3ef657bb5147ddd355465700` is the culprit. NeilBrown added the crucial check:
```c
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_size != mddev->new_chunk);
BUG_ON(mddev->delta_disks != 0);
}
```
That `BUG_ON(mddev->delta_disks != 0)` is what catches it! That triggers the kernel BUG at drivers/md/raid5.c:8117 (or 4339 in 2009).
So, everything is crystal clear: commit `91adb56473febeeb3ef657bb5147ddd355465700` introduced the bug.
Now, let's just do a quick sanity check on that commit hash, `91adb56473febeeb3ef657bb5147ddd355465700`. Yep, it's correct. Title: "md/raid5: refactor raid5 "run"" and the author is NeilBrown. That checks out.
Finally, I need to make sure I can enter the full commit hash using `set-results`. Let's use `FixesHash`: "91adb56473febeeb3ef657bb5147ddd355465700".
Time to call `set-results`.
|
| 568/2 |
2026/09/09 21:42 |
tool |
set-results |
0m
Args: map[FixesHash:91adb56473febeeb3ef657bb5147ddd355465700]
Results: map[FixesHash:91adb56473febeeb3ef657bb5147ddd355465700]
|
| 569/1 |
2026/09/09 21:42 |
action |
format-fixes |
0m
Results: map[Fixes:map[AuthorEmail:neilb@suse.de AuthorName:NeilBrown Hash:91adb56473febeeb3ef657bb5147ddd355465700 Title:md/raid5: refactor raid5 "run"]]
|
| 570/1 |
2026/09/09 21:42 |
action |
get-maintainers |
0m
Results: map[Recipients:[map[Email:linux-kernel@vger.kernel.org Name: To:false] map[Email:linux-raid@vger.kernel.org Name: To:true] map[Email:magiclinan@didiglobal.com Name:Li Nan To:false] map[Email:song@kernel.org Name:Song Liu To:true] map[Email:xiao@kernel.org Name:Xiao Ni To:false] map[Email:yukuai@fygo.io Name:Yu Kuai To:true] map[Email:neilb@suse.de Name:NeilBrown To:true]]]
|
| 571/1 |
2026/09/09 21:42 |
action |
get-recent-commits |
0m
Results: map[RecentCommits:md: skip discard on unsupported member devices
md: add cond_resched() to md_do_sync()'s skip path
md/md-llbitmap: add reshape range mapping helpers
md: add exact bitmap mapping and reshape hooks
md: add helper to split bios at reshape offset
md: skip bitmap accounting for empty write ranges
md: avoid stale clone I/O accounting timestamps
md: wait for behind writes before destroying bitmap
md/raid1: create serial pool adding rdev to array with serialize_policy=1
md: do overflow check for sb->bblog_shift in super_1_load()
md: scope memalloc_noio to allocation critical sections
md: suspend array when sync_action=reshape
md: widen badblock sectors param from int to sector_t
md: recheck spare changes before starting sync
md: remove REQ_NOWAIT support from raid1/10/456
md/raid1: honor REQ_NOWAIT when waiting for behind writes
md/raid1,raid10: fix deadlock in read error recovery path
md: skip redundant raid_disks update when value is unchanged
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
]
|
| 572/1 |
2026/09/09 21:42 |
agent |
description-generator |
1m
Model:
Instruction:
You are an experienced Linux kernel developer tasked with writing a commit description for
a kernel bug fixing commit. The description should start with a one-line summary,
and then include description of the bug being fixed, and how it's fixed by the provided patch.
The one-line summary should describe the change being made, rather than mention the tool that
detected the bug.
The description must not contain lines starting with '#' because they will dropped by git as comments.
The description must not contain lines starting with '--' or '---' (including inline code diffs)
because they may confuse git/patch utilities.
Your final reply should contain only the text of the commit description.
The one-line summary must be not longer than 72 characters.
IMPORTANT: Do not wrap lines manually (e.g., at 80 characters); we will reformat the text
automatically, so keep paragraphs as single lines without newlines.
Generally try to phrase the description without mentioning syzkaller
(avoid phrases like "the bug was triggered by syzkaller" or "the bug was triggered by fuzzer", etc).
How the bug was triggered is generally an irrelevant detail.
Any bug triggered by a fuzzer can also be triggered by a malicious user, or a buggy program.
If the crash is reported by a sanitizer (e.g., KASAN, KMSAN, lockdep), include the relevant
parts of the sanitizer output to illustrate the problem. Exclude less relevant sections,
as the stack trace can be very long. Describe the execution path that leads to the manifestation
of the kernel bug.
Prefer calling several tools at the same time to save round-trips.
Prompt:
The crash that corresponds to the bug is:
md/raid:md123: device loop1 operational as raid disk 1
md/raid:md123: device loop0 operational as raid disk 0
md/raid:md123: raid level 5 active with 3 out of 3 devices, algorithm 0
------------[ cut here ]------------
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5901 Comm: syz-executor214 Not tainted syzkaller #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe3ade65a77
Code: 48 89 fa 4c 89 df e8 98 1d 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: 002b:00007ffe365c80b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055555dacb400 RCX: 00007fe3ade65a77
RDX: 0000000000000006 RSI: 00007fe3ade9f1aa RDI: 0000000000000003
RBP: 0000000000000032 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fe3ade9f1aa
R13: 00007fe3adea1500 R14: 0000000000000002 R15: 00007fe3adea14b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Code: 24 38 4c 8b 6c 24 40 e9 ca e2 ff ff e8 79 e3 54 f9 90 0f 0b e8 71 e3 54 f9 90 0f 0b e8 69 e3 54 f9 90 0f 0b e8 61 e3 54 f9 90 <0f> 0b e8 59 e3 54 f9 e8 44 a1 c1 f8 eb b7 66 90 90 90 90 90 90 90
RSP: 0018:ffffc90003e078e8 EFLAGS: 00010293
RAX: ffffffff88711fcf RBX: dffffc0000000000 RCX: ffff888113b04b00
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff88810739e02f R09: 1ffff11020e73c05
R10: dffffc0000000000 R11: ffffed1020e73c06 R12: ffff88810739e000
R13: 1ffff11020e73c05 R14: ffff88810739e1d0 R15: ffff88810739e028
FS: 000055555dacb400(0000) GS:ffff8881a4c6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63b46f8e9c CR3: 000000010bd60000 CR4: 0000000000352ef0
The explanation of the root cause of the bug is:
An analysis of the crash and the provided reproducer reveals that the bug is caused by a failure to clear pending reshape parameters when an MD array is temporarily stopped (deactivated to `inactive` state) before the reshape has actually started.
### Root Cause Analysis
The crash occurs in `raid5_run()` at `drivers/md/raid5.c:8117` due to the following `BUG_ON` assertion:
```c
if (mddev->reshape_position != MaxSector) {
/* ... handle in-progress reshape ... */
} else {
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0); // <--- CRASH
}
```
The sequence of events leading to this crash is as follows:
1. **Array is Active:** The user creates a RAID5 array and starts it (`array_state` = `"active"`). The personality (`mddev->pers`) is attached.
2. **Reshape Requested:** The user changes the number of disks by writing to the `raid_disks` sysfs attribute. Since the array is active, `raid_disks_store()` calls `update_raid_disks()`. This function sets `mddev->delta_disks = 1` and calls `mddev->pers->check_reshape(mddev)`. However, the reshape does not start immediately, so `mddev->reshape_position` remains `MaxSector`.
3. **Array is Stopped:** Before the reshape starts (e.g., by writing to `sync_action`), the user stops the array by writing `"inactive"` to `array_state`. This invokes `do_md_stop(mddev, 2)`, which calls `__md_stop(mddev)`. `__md_stop()` detaches the personality (`mddev->pers = NULL`) and frees the private data. Crucially, it **fails to clear** the pending reshape parameters like `mddev->delta_disks`. (Note: If the array was completely stopped with `mode == 0`, `md_clean()` would be called, which correctly clears these fields. But `mode == 2` bypasses `md_clean()`).
4. **Array is Restarted:** The user restarts the array by writing `"active"` to `array_state`. `md_run()` is called, which invokes the personality's run method, `raid5_run()`.
5. **Crash:** `raid5_run()` checks if a reshape is in progress. Since `mddev->reshape_position` is still `MaxSector` (the reshape never started), it takes the `else` branch. It expects that if no reshape is in progress, there should be no pending reshape parameters. However, `mddev->delta_disks` is still `1` from step 2, triggering the `BUG_ON()`.
This behavior is inconsistent with how the MD core handles superblocks. As seen in `super_1_validate()` and `super_90_validate()`, if `MD_FEATURE_RESHAPE_ACTIVE` is not set (which corresponds to `reshape_position == MaxSector`), any pending reshape parameters are discarded and reset to 0/defaults. A pending reshape that hasn't started is purely an in-memory state and should be aborted if the array is stopped.
### Proposed Fix
To fix this, `__md_stop()` should be updated to clear the pending reshape parameters if the array is stopped and no reshape is currently in progress (`mddev->reshape_position == MaxSector`). This ensures that aborted reshapes do not leave stale state in the `mddev` structure.
```c
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
```
This fix covers all the `BUG_ON`s in `raid5_run()` and ensures that if the user modifies `raid_disks`, `level`, `layout`, or `chunk_size` while the array is active, and then stops the array before the reshape begins, the pending changes are safely discarded. If a reshape *is* actually in progress (`reshape_position != MaxSector`), the parameters are preserved so the reshape can resume upon restart.
The diff of the bug fix is:
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 680b34a63..38ab41bbc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7095,6 +7095,14 @@ static void __md_stop(struct mddev *mddev)
mddev->private = NULL;
put_pers(pers);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (mddev->reshape_position == MaxSector) {
+ mddev->delta_disks = 0;
+ mddev->reshape_backwards = 0;
+ mddev->new_level = mddev->level;
+ mddev->new_layout = mddev->layout;
+ mddev->new_chunk_sectors = mddev->chunk_sectors;
+ }
}
void md_stop(struct mddev *mddev)
Additional description of the patch:
An issue was discovered in the MD subsystem where stopping an active MD array prior to starting a configured reshape operation left stale reshape parameters stored in memory on the `struct mddev`.
### Root Cause
1. When a reshape is initiated (for example, by modifying `raid_disks` via sysfs), `update_raid_disks()` sets `mddev->delta_disks`, `mddev->reshape_backwards`, and potentially other reshape parameters (`new_layout`, `new_chunk_sectors`, `new_level`). At this point, the reshape has not yet started running, so `mddev->reshape_position` remains set to `MaxSector`.
2. If userspace deactivates or stops the array before the reshape begins (e.g., writing `"inactive"` to `array_state`), `do_md_stop(mddev, 2)` calls `__md_stop(mddev)`.
3. `__md_stop(mddev)` detaches the personality (`mddev->pers = NULL`) and frees `mddev->private`, but did not reset the in-memory reshape fields when no reshape was in progress. Note that in a full stop/disassembly (`mode == 0`), `md_clean(mddev)` is called which clears these fields, but deactivation (`mode == 2`) bypasses `md_clean()`.
4. When the array is later restarted (e.g. `array_state = "active"` -> `md_run()`), the personality's run method (`raid5_run()`) inspects `mddev->reshape_position`. Because `reshape_position == MaxSector`, it enters the non-reshape branch where it asserts that no reshape parameters are pending:
```c
BUG_ON(mddev->level != mddev->new_level);
BUG_ON(mddev->layout != mddev->new_layout);
BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
BUG_ON(mddev->delta_disks != 0);
```
The stale `delta_disks` (and/or other pending attributes) triggered the `BUG_ON()` kernel panic.
### Fix
In `drivers/md/md.c`, update `__md_stop(struct mddev *mddev)` to check whether a reshape was active (`mddev->reshape_position == MaxSector`). If no reshape was actively running, reset the pending parameters back to their current array configuration and default values:
- `mddev->delta_disks = 0;`
- `mddev->reshape_backwards = 0;`
- `mddev->new_level = mddev->level;`
- `mddev->new_layout = mddev->layout;`
- `mddev->new_chunk_sectors = mddev->chunk_sectors;`
This reset mirrors the established conventions used in `super_1_validate()`, `super_90_validate()`, and `reshape_position_store()`. If a reshape actually was underway (`mddev->reshape_position != MaxSector`), the parameters are preserved so the reshape can resume when the array is restarted. Furthermore, callers of `__md_stop()` hold `mddev->reconfig_mutex` and all writes/sync threads are stopped prior to the call, making the operation safe and race-free.
Here are summaries of recent commits that touched the same files.
Format the summary line consistently with these, look how prefixes
are specified, letter capitalization, style, etc.
md: skip discard on unsupported member devices
md: add cond_resched() to md_do_sync()'s skip path
md/md-llbitmap: add reshape range mapping helpers
md: add exact bitmap mapping and reshape hooks
md: add helper to split bios at reshape offset
md: skip bitmap accounting for empty write ranges
md: avoid stale clone I/O accounting timestamps
md: wait for behind writes before destroying bitmap
md/raid1: create serial pool adding rdev to array with serialize_policy=1
md: do overflow check for sb->bblog_shift in super_1_load()
md: scope memalloc_noio to allocation critical sections
md: suspend array when sync_action=reshape
md: widen badblock sectors param from int to sector_t
md: recheck spare changes before starting sync
md: remove REQ_NOWAIT support from raid1/10/456
md/raid1: honor REQ_NOWAIT when waiting for behind writes
md/raid1,raid10: fix deadlock in read error recovery path
md: skip redundant raid_disks update when value is unchanged
md: use ATTRIBUTE_GROUPS() for md default sysfs attributes
md: use mddev_is_dm() instead of open-coding gendisk checks
Reply: md: clear pending reshape parameters in __md_stop()
When reconfiguring an active MD array (for instance, updating the number of
disks via the raid_disks sysfs attribute), pending reshape parameters such
as delta_disks, new_level, new_layout, and new_chunk_sectors are stored in
struct mddev. At this stage, the reshape has not yet started running and
mddev->reshape_position remains set to MaxSector.
If userspace deactivates or stops the array before the reshape begins (such
as by writing "inactive" to array_state), do_md_stop() invokes __md_stop().
Unlike a full stop which invokes md_clean() to clear all configuration
fields, __md_stop() detaches the personality and frees private data but
leaves the pending reshape parameters in struct mddev. When the array is
later restarted (e.g. by writing "active" to array_state), md_run() calls
the personality's run method, raid5_run(). Because mddev->reshape_position
is still MaxSector, raid5_run() assumes no reshape is taking place and
expects no pending reshape parameters, causing BUG_ON(mddev->delta_disks !=
0) to trigger:
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by clearing pending reshape parameters in __md_stop() if no
reshape is currently running (mddev->reshape_position == MaxSector).
Specifically, reset delta_disks and reshape_backwards to 0, and reset
new_level, new_layout, and new_chunk_sectors to level, layout, and
chunk_sectors, respectively. If a reshape is actively in progress
(mddev->reshape_position != MaxSector), the parameters are preserved so the
reshape can resume when the array is restarted.
|
| 573/2 |
2026/09/09 21:42 |
llm |
description-generator |
0m
Model:
Tokens:
input: 8961
output: 39
thoughts: 778
Thoughts: **Crafting a Precise Linux Kernel Commit Description**
Okay, so I need to create a commit description for a Linux kernel bug fix. First, I need to make sure I understand the requirements completely. The description needs a concise summary line, limited to 72 characters, followed by a more detailed explanation of the bug and the fix. I've got to avoid lines starting with '#' or '--' and not mention any specific fuzzing tools. The goal is to be technically accurate and easy to understand.
From the provided crash report, I see a kernel BUG in `drivers/md/raid5.c:8117`. The crash involves an invalid opcode and KASAN. The call trace points to `md_run`, which is where I need to focus my investigation. The report doesn't contain the exact code in `raid5_run` or `__md_stop`, so I'll need to check the source code.
I need to now check the source code around line 8117 in `drivers/md/raid5.c`. I'll also see if I can find `delta_disks` in `raid5.c` to see if that helps me. This crash appears to be triggered during a RAID operation. Now I can build my commit description.
|
| 574/2 |
2026/09/09 21:43 |
tool |
grepper |
0m
Args: map[Expression:BUG_ON\(mddev->delta_disks != 0\) PathPrefix:drivers/md/]
Results: map[Output:drivers/md/raid5.c=7989=static int raid5_run(struct mddev *mddev)
--
drivers/md/raid5.c-8116- BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
drivers/md/raid5.c:8117: BUG_ON(mddev->delta_disks != 0);
drivers/md/raid5.c-8118- }
]
|
| 575/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 10177
output: 35
thoughts: 20
Thoughts: Here's my take on those thoughts, tailored for an expert audience:
**Diving into the `md.c` Stop Function**
Okay, so I need to understand how the MD driver gracefully handles stopping. My immediate focus is on the `__md_stop()` function within `drivers/md/md.c`. I need to ensure the logic there is sound. I'm thinking about the various scenarios it has to handle, and what resources are being cleaned up. I want to look at how it deals with outstanding I/O, potential data integrity concerns during the stop, and, of course, proper device detachment. I'll need to refresh my memory on the interactions with the underlying block devices and how the RAID metadata is handled during the shutdown. Are there any race conditions I need to be aware of? Are there any potential deadlocks? Time to dig in!
|
| 576/2 |
2026/09/09 21:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:__md_stop]
Results: map[SourceCode:7084: static void __md_stop(struct mddev *mddev)
7085: {
7086: struct md_personality *pers = mddev->pers;
7087:
7088: mddev_detach(mddev);
7089: md_bitmap_destroy(mddev);
7090: spin_lock(&mddev->lock);
7091: mddev->pers = NULL;
7092: spin_unlock(&mddev->lock);
7093: if (mddev->private)
7094: pers->free(mddev, mddev->private);
7095: mddev->private = NULL;
7096: put_pers(pers);
7097: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7098: }
SourceFile:drivers/md/md.c]
|
| 577/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 10670
output: 41
thoughts: 14
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience:
**Analyzing the `__md_stop` Call Site**
Okay, so I need to understand the behavior tied to the `__md_stop` function. My first instinct is always to trace its calls. Where is this function actually invoked? What context surrounds its execution? Knowing the call sites is absolutely crucial to grasping its intended purpose and, critically, any potential side effects. I'll need to use my usual tools β probably a combination of grep, a debugger if the code base warrants it, and maybe even some static analysis if I have the time and it's suitable β to build a complete call graph and pinpoint those locations precisely. This will allow me to identify the relevant control flow and data flow to contextualize the behavior. I'm looking for the "who," "when," and "why" of its execution within the system. Understanding this directly influences how this function behaves when running.
|
| 578/2 |
2026/09/09 21:43 |
tool |
codesearch-find-references |
0m
Args: map[ContextFile:drivers/md/md.c IncludeSnippetLines:5 Name:__md_stop]
Results: map[References:[map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:do_md_stop SourceFile:drivers/md/md.c SourceLine:7193 SourceSnippet:7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
] map[ReferenceKind:calls ReferencingEntityKind:function ReferencingEntityName:md_stop SourceFile:drivers/md/md.c SourceLine:7108 SourceSnippet:7103:
7104: /* stop the array and free an attached data structures.
7105: * This is called from dm-raid
7106: */
7107: __md_stop_writes(mddev);
7108: __md_stop(mddev);
7109: }
]] TruncatedOutput:false]
|
| 579/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 11323
output: 36
thoughts: 19
Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and presented as if it were my own internal monologue:
**Investigating a Potential Markdown Rendering Halt**
Alright, I'm diving into this code again. Specifically, I'm thinking about the function `do_md_stop`. Let's zero in on line 7193. It's a pretty specific reference, so I'm guessing something significant happens around there regarding markdown processing. My experience tells me that line number references like this often point to a crucial conditional statement or a point where some state is evaluated that could lead to the premature stopping of a Markdown rendering process. I suspect I might be dealing with a logic error or edge case within the markdown parsing engine. The aim is to trace through the code, particularly the variables at play around that line. If there is a stop, I will need to understand what variables are active, and in what context, to discover why the markdown rendering engine is halting. My expertise suggests that the stop could be due to a malformed input, an internal buffer overflow, an unexpected configuration, or a bug in a state transition. I'm going to look for potential error conditions and try to determine the root cause of the behavior, perhaps a particular input sequence, or state, that triggers the termination.
|
| 580/2 |
2026/09/09 21:43 |
tool |
read-file |
0m
Args: map[File:drivers/md/md.c FirstLine:7170 LineCount:45]
Results: map[Contents:7170: set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7171: }
7172:
7173: stop_sync_thread(mddev, true);
7174:
7175: if (mddev->sysfs_active ||
7176: test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) {
7177: pr_warn("md: %s still in use.\n",mdname(mddev));
7178: if (did_freeze) {
7179: clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
7180: set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
7181: }
7182: return -EBUSY;
7183: }
7184: if (mddev->pers) {
7185: if (!md_is_rdwr(mddev))
7186: set_disk_ro(disk, 0);
7187:
7188: if (mode == 2 && mddev->pers->sync_request &&
7189: mddev->to_remove == NULL)
7190: mddev->to_remove = &md_redundancy_group;
7191:
7192: __md_stop_writes(mddev);
7193: __md_stop(mddev);
7194:
7195: /* tell userspace to handle 'inactive' */
7196: sysfs_notify_dirent_safe(mddev->sysfs_state);
7197:
7198: rdev_for_each(rdev, mddev)
7199: if (rdev->raid_disk >= 0)
7200: sysfs_unlink_rdev(mddev, rdev);
7201:
7202: set_capacity_and_notify(disk, 0);
7203: mddev->changed = 1;
7204:
7205: if (!md_is_rdwr(mddev))
7206: mddev->ro = MD_RDWR;
7207: }
7208: /*
7209: * Free resources if final stop
7210: */
7211: if (mode == 0) {
7212: pr_info("md: %s stopped.\n", mdname(mddev));
7213:
7214: if (mddev->bitmap_info.file) {
]
|
| 581/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 12361
output: 34
thoughts: 15
Thoughts: Here's a summary of my understanding, as if I were thinking it:
**Deconstructing `md_clean(mddev)`**
Okay, let's dive into this. I'm looking at `md_clean(mddev)` and the first thing that pops into my head is, "What's the *goal* here?" Given that `md` implies potentially some sort of metadata device or RAID setup, and `clean` suggests some sort of maintenance action, I'm already formulating some hypotheses. Is this about scrubbing bad blocks? Data re-sync? Marking regions as clean after a failure? Is it related to a specific RAID level or is this function abstracted from the specific MD implementation?
I need to understand what `mddev` actually *is*. Is it a struct representing the whole device, or does this reference specific blocks?
I'm thinking about the possible internal states. The cleaning process likely changes the states of some blocks, perhaps marking them as clean, valid or invalid, and maybe triggering a re-read/write. How does this interoperate with other MD operations β read, write, recovery? Does it involve locking or synchronization to prevent data corruption?
If this is some sort of RAID device, I'll need to work out the implementation specifics for the given level. Is this related to RAID-5 or RAID-6 parity calculations?
My mental checklist is running through all the potential failure scenarios I've dealt with in similar systems: data corruption during the clean, deadlocks, incorrect block assignment, and potential data loss if implemented badly. Itβs also possible that this is a safe implementation, with plenty of error checking. I'm going to need to consider the different error handling mechanisms and how they are implemented.
|
| 582/2 |
2026/09/09 21:43 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/md/md.c Name:md_clean]
Results: map[SourceCode:6967: static void md_clean(struct mddev *mddev)
6968: {
6969: mddev->array_sectors = 0;
6970: mddev->external_size = 0;
6971: mddev->dev_sectors = 0;
6972: mddev->raid_disks = 0;
6973: mddev->resync_offset = 0;
6974: mddev->resync_min = 0;
6975: mddev->resync_max = MaxSector;
6976: mddev->reshape_position = MaxSector;
6977: /* we still need mddev->external in export_rdev, do not clear it yet */
6978: mddev->persistent = 0;
6979: mddev->level = LEVEL_NONE;
6980: mddev->clevel[0] = 0;
6981:
6982: /*
6983: * For legacy_async_del_gendisk mode, it can stop the array in the
6984: * middle of assembling it, then it still can access the array. So
6985: * it needs to clear MD_CLOSING. If not legacy_async_del_gendisk,
6986: * it can't open the array again after stopping it. So it doesn't
6987: * clear MD_CLOSING.
6988: */
6989: if (legacy_async_del_gendisk && mddev->hold_active) {
6990: clear_bit(MD_CLOSING, &mddev->flags);
6991: } else {
6992: /* if UNTIL_STOP is set, it's cleared here */
6993: mddev->hold_active = 0;
6994: /* Don't clear MD_CLOSING, or mddev can be opened again. */
6995: mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
6996: }
6997: mddev->sb_flags = 0;
6998: mddev->ro = MD_RDWR;
6999: mddev->metadata_type[0] = 0;
7000: mddev->chunk_sectors = 0;
7001: mddev->ctime = mddev->utime = 0;
7002: mddev->layout = 0;
7003: mddev->logical_block_size = 0;
7004: mddev->max_disks = 0;
7005: mddev->events = 0;
7006: mddev->can_decrease_events = 0;
7007: mddev->delta_disks = 0;
7008: mddev->reshape_backwards = 0;
7009: mddev->new_level = LEVEL_NONE;
7010: mddev->new_layout = 0;
7011: mddev->new_chunk_sectors = 0;
7012: mddev->curr_resync = MD_RESYNC_NONE;
7013: atomic64_set(&mddev->resync_mismatches, 0);
7014: mddev->suspend_lo = mddev->suspend_hi = 0;
7015: mddev->sync_speed_min = mddev->sync_speed_max = 0;
7016: mddev->recovery = 0;
7017: mddev->in_sync = 0;
7018: mddev->changed = 0;
7019: mddev->degraded = 0;
7020: mddev->safemode = 0;
7021: mddev->private = NULL;
7022: mddev->cluster_info = NULL;
7023: mddev->bitmap_info.offset = 0;
7024: mddev->bitmap_info.default_offset = 0;
7025: mddev->bitmap_info.default_space = 0;
7026: mddev->bitmap_info.chunksize = 0;
7027: mddev->bitmap_info.daemon_sleep = 0;
7028: mddev->bitmap_info.max_write_behind = 0;
7029: mddev->bitmap_info.nodes = 0;
7030: }
SourceFile:drivers/md/md.c]
|
| 583/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 13975
output: 30
thoughts: 102
Thoughts: Okay, here's my take on those code snippets, thinking through the implications as I'd approach it:
**Digging into `md_clean()` and Superblock Validation**
Right, so `md_clean()`... that's the function that resets the reshape operation state, isn't it? Let's confirm: Yep, it's setting `mddev->delta_disks`, `mddev->reshape_backwards`, `mddev->new_level`, `mddev->new_layout`, and `mddev->new_chunk_sectors` all back to their zero/default values. This makes perfect sense. Essentially, we're clearing the decks, removing any pending reshape operations, which is what `md_clean()` should be doing. Makes me wonder where it's called and under what conditions. Probably a good place to look for subtle bugs later.
Now, let's see how the superblock validation functions, `super_1_validate()` and `super_90_validate()`, handle this. They have to ensure the consistency of the metadata post-reshape. I need to dig into how they are ensuring that the reset performed by `md_clean()` aligns with the expected state of the array. Are they checking these reset values during validation, or are they relying on the higher-level logic to prevent inconsistencies from ever arising? I'll bet it's the former, more robust strategy. I'll need to check the logic flow in these validation functions carefully to understand how they detect and potentially correct inconsistencies. This is where the real robustness of the RAID implementation lies.
|
| 584/2 |
2026/09/09 21:43 |
tool |
grepper |
0m
Args: map[Expression:reshape_position == MaxSector PathPrefix:drivers/md/]
Results: map[Output:drivers/md/md.c=1604=static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/md.c-1648-
drivers/md/md.c:1649: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-1650- sb->minor_version = 90;
--
drivers/md/md.c=4368=layout_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4392- mddev->new_layout = n;
drivers/md/md.c:4393: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4394- mddev->layout = n;
--
drivers/md/md.c=4481=chunk_size_store(struct mddev *mddev, const char *buf, size_t len)
--
drivers/md/md.c-4505- mddev->new_chunk_sectors = n >> 9;
drivers/md/md.c:4506: if (mddev->reshape_position == MaxSector)
drivers/md/md.c-4507- mddev->chunk_sectors = n >> 9;
--
drivers/md/md.c=5242=static int mddev_start_reshape(struct mddev *mddev)
--
drivers/md/md.c-5248-
drivers/md/md.c:5249: if (mddev->reshape_position == MaxSector ||
drivers/md/md.c-5250- mddev->pers->check_reshape == NULL ||
--
drivers/md/md.c=10256=static void md_start_sync(struct work_struct *ws)
--
drivers/md/md.c-10267- */
drivers/md/md.c:10268: if ((mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10269- md_spares_need_change(mddev)) {
--
drivers/md/md.c-10280- */
drivers/md/md.c:10281: if (!suspend && (mddev->reshape_position == MaxSector || !md_is_rdwr(mddev)) &&
drivers/md/md.c-10282- md_spares_need_change(mddev)) {
--
drivers/md/md.h=690=static inline bool reshape_interrupted(struct mddev *mddev)
--
drivers/md/md.h-692- /* reshape never start */
drivers/md/md.h:693: if (mddev->reshape_position == MaxSector)
drivers/md/md.h-694- return false;
--
drivers/md/raid10.c=3141=static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr,
--
drivers/md/raid10.c-3159- mddev->resync_offset == MaxSector &&
drivers/md/raid10.c:3160: mddev->reshape_position == MaxSector &&
drivers/md/raid10.c-3161- !test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
--
drivers/md/raid10.c=3828=static struct r10conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid10.c-3874- calc_sectors(conf, mddev->dev_sectors);
drivers/md/raid10.c:3875: if (mddev->reshape_position == MaxSector) {
drivers/md/raid10.c-3876- conf->prev = conf->geo;
--
drivers/md/raid10.c=4928=static void raid10_update_reshape_pos(struct mddev *mddev)
--
drivers/md/raid10.c-4934- if (((mddev->reshape_position <= hi) && (mddev->reshape_position >= lo))
drivers/md/raid10.c:4935: || mddev->reshape_position == MaxSector)
drivers/md/raid10.c-4936- conf->reshape_progress = mddev->reshape_position;
--
drivers/md/raid5.c=6218=static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
--
drivers/md/raid5.c-6249- if (rw == READ && mddev->degraded == 0 &&
drivers/md/raid5.c:6250: mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-6251- bi = chunk_aligned_read(mddev, bi);
--
drivers/md/raid5.c=7633=static struct r5conf *setup_conf(struct mddev *mddev)
--
drivers/md/raid5.c-7725- conf->raid_disks = mddev->raid_disks;
drivers/md/raid5.c:7726: if (mddev->reshape_position == MaxSector)
drivers/md/raid5.c-7727- conf->previous_raid_disks = mddev->raid_disks;
--
drivers/md/raid5.c=8444=static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
--
drivers/md/raid5.c-8507- if (test_bit(WantReplacement, &tmp->flags) &&
drivers/md/raid5.c:8508: mddev->reshape_position == MaxSector &&
drivers/md/raid5.c-8509- p->replacement == NULL) {
--
drivers/md/raid5.c=8586=static int check_reshape(struct mddev *mddev)
--
drivers/md/raid5.c-8599- return -EINVAL;
drivers/md/raid5.c:8600: if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
drivers/md/raid5.c-8601- /* We might be able to shrink, but the devices must
]
|
| 585/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 16114
output: 28
thoughts: 23
Thoughts: Here's my summary, as if I were thinking these thoughts:
**Analyzing the `md.c` Git Log**
Okay, time to dive in. I need a quick overview of recent changes and coding style within the `md.c` driver. I'll start by checking the Git log. Seeing the commit history directly will give me a sense of the recent modifications and, more importantly, how those changes are being presented. I'm looking for patterns β are the commit messages descriptive and concise? Does the commit style align with established kernel conventions? Are there any clear examples of good (or bad) practices that I can identify quickly? This will help me get my bearings and understand the current development velocity and direction within this specific part of the RAID subsystem. I'm expecting some well-structured and concise commit messages. Let's see what we've got.
|
| 586/2 |
2026/09/09 21:43 |
tool |
git-log |
0m
Args: map[Count:10 PathPrefix:drivers/md/md.c]
Results: map[Output:efdffeb6d491 md: skip discard on unsupported member devices
162eb5ba791f md: add cond_resched() to md_do_sync()'s skip path
629c1659e90c md/md-llbitmap: add reshape range mapping helpers
1ee6fef6e0db md: add exact bitmap mapping and reshape hooks
ffd3e73d6e0c md: add helper to split bios at reshape offset
87c10252e3d6 md: skip bitmap accounting for empty write ranges
45102fc83305 md: avoid stale clone I/O accounting timestamps
2a79365b2278 md: wait for behind writes before destroying bitmap
140234b2380f md/raid1: create serial pool adding rdev to array with serialize_policy=1
35d522bd3246 md: do overflow check for sb->bblog_shift in super_1_load()
]
|
| 587/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 16600
output: 26
thoughts: 56
Thoughts: Okay, let's dive into some recent code changes. I need to refresh my memory on what's been happening, so I'll start by examining the commits associated with those specific IDs: `2a79365b2278`, `35d522bd3246`, and `162eb5ba791f`. I need to understand the granular details and context of these commits so that I can get the bigger picture.
|
| 588/2 |
2026/09/09 21:43 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 35d522bd32462afcf1981dab6da8a9256c26c1e0
Author: Coly Li <colyli@fygo.io>
Date: Mon Jul 20 19:14:00 2026 +0800
md: do overflow check for sb->bblog_shift in super_1_load()
In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on-
disk superblock. It is used for badblocks API badblocks_set() by the
following sequence,
1930 rdev->badblocks.shift = sb->bblog_shift;
1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) {
1932 u64 bb = le64_to_cpu(*bbp);
1933 int count = bb & (0x3ff);
1934 u64 sector = bb >> 10;
1935 sector <<= sb->bblog_shift;
1936 count <<= sb->bblog_shift;
1937 if (bb + 1 == 0)
1938 break;
1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1))
1940 return -EINVAL;
1941 }
bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for
an invalid bb->bblog_shit, it is possible to make sector be overflowed
by the following calculation,
1935 sector <<= sb->bblog_shift;
Then in turn when call badblocks_set() at line 1939 with the invalid
rdev->badblocks.shift set at line 1930, may result an overflow inside
_badblocks_clear() in block/badblocks.c.
Although there are many places to call badblocks APIs, the non-zero
shift value is only used in super_1_load(), other places always use 0 as
the shift value. Therefore it is unnecessary to do a general shift value
overflow check inside badblock API, and just check here as the caller.
This may avoid unnecessary check, make the badblocks API code more simple
and elegant.
Fixes: 2699b67223ac ("md: load/store badblock list from v1.x metadata")
Fixes: 1726c7746783 ("badblocks: improve badblocks_set() for multiple ranges handling")
Cc: stable@vger.kernel.org
Cc: Ramesh Adhikari <adhikari.resume@gmail.com>
Signed-off-by: Coly Li <colyli@fygo.io>
Reviewed-by: Yu Kuai <yukuai@fygo.io>
Link: https://patch.msgid.link/20260720111400.2120834-1-colyli@fygo.io
Signed-off-by: Yu Kuai <yukuai@fygo.io>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 3d6357f8fc04..f280664a8b32 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1914,6 +1914,13 @@ static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_
rdev->bb_page, REQ_OP_READ, true))
return -EIO;
bbp = (__le64 *)page_address(rdev->bb_page);
+
+ /* check for badblocks api. */
+ if (sb->bblog_shift >= BITS_PER_TYPE(sector_t)) {
+ pr_err("md: %pg: bogus bblog_shift %u for badblocks.\n",
+ rdev->bdev, sb->bblog_shift);
+ return -EINVAL;
+ }
rdev->badblocks.shift = sb->bblog_shift;
for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) {
u64 bb = le64_to_cpu(*bbp);
]
|
| 589/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 17937
output: 27
thoughts: 9
Thoughts: Okay, here's my interpretation of that prompt, and my response:
**Thinking About Another Commit**
Alright, another commit's popped up in the markdown repository. Let's see what's changed this time. I need to quickly grasp the essence of it. Is it a bug fix? Feature implementation? Refactoring? Or maybe just some documentation updates. I'll need to sift through the changes efficiently, pinpointing the key alterations and their impact. I'll be looking for any potential ripple effects on other parts of the system and consider the overall implications within the context of the larger project. The quality and clarity of the commit message will of course be very relevant here, because that often gives key context around *why* the changes were made. I need to quickly ascertain the *significance* of this commit β does it require immediate attention, or is it something that can be addressed later? Time to dive in... and assess.
|
| 590/2 |
2026/09/09 21:43 |
tool |
git-show |
0m
Args:
Results: map[Output:commit 2a79365b2278f16e163e4024086105693b421601
Author: Yu Kuai <yukuai@fygo.io>
Date: Mon Aug 3 03:50:15 2026 +0800
md: wait for behind writes before destroying bitmap
__md_stop() destroyed the bitmap before calling mddev_detach(). That made
mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap
was already disconnected from mddev.
This was still safe for the legacy bitmap because bitmap_destroy() waits
for behind writes itself. llbitmap keeps that wait in its
->wait_behind_writes() operation instead, while ->destroy() tears down the
llbitmap storage. With the old ordering, RAID1 behind-write completions
could still run after llbitmap storage had been freed.
Call mddev_detach() before md_bitmap_destroy() so the common detach path
can wait for behind writes while the bitmap is still alive. Only destroy
the bitmap after those users are gone.
Fixes: 5ab829f1971d ("md/md-llbitmap: introduce new lockless bitmap")
Tested-by: Mykola Marzhan <mykola@meshstor.io>
Link: https://patch.msgid.link/20260802195038.164272-7-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 51b620edbef7..b61040315aef 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7085,8 +7085,8 @@ static void __md_stop(struct mddev *mddev)
{
struct md_personality *pers = mddev->pers;
- md_bitmap_destroy(mddev);
mddev_detach(mddev);
+ md_bitmap_destroy(mddev);
spin_lock(&mddev->lock);
mddev->pers = NULL;
spin_unlock(&mddev->lock);
]
|
| 591/2 |
2026/09/09 21:43 |
llm |
description-generator |
0m
Model:
Tokens:
input: 18770
output: 715
thoughts: 7563
Thoughts: **md: clear pending reshape parameters in __md_stop()**
When reconfiguring an active MD array (for instance, updating the number of disks via the raid_disks sysfs attribute), pending reshape parameters such as delta_disks, new_level, new_layout, and new_chunk_sectors are stored in struct mddev. At this stage, the reshape has not yet started running and mddev->reshape_position remains set to MaxSector.
If userspace deactivates or stops the array before the reshape begins (such as by writing "inactive" to array_state), do_md_stop() invokes __md_stop(). Unlike a full stop which invokes md_clean() to clear all configuration fields, __md_stop() detaches the personality and frees private data but leaves the pending reshape parameters in struct mddev. When the array is later restarted (e.g. by writing "active" to array_state), md_run() calls the personality's run method, raid5_run(). Because mddev->reshape_position is still MaxSector, raid5_run() assumes no reshape is taking place and expects no pending reshape parameters, causing BUG_ON(mddev->delta_disks != 0) to trigger:
kernel BUG at drivers/md/raid5.c:8117!
Oops: invalid opcode: 0000 [#1] SMP
RIP: 0010:raid5_run+0x2550/0x2560 drivers/md/raid5.c:8117
Call Trace:
<TASK>
md_run+0xc3d/0x1cd0 drivers/md/md.c:6779
do_md_run+0x35/0x720 drivers/md/md.c:6880
array_state_store+0x958/0xe90 drivers/md/md.c:-1
md_attr_store+0x3b7/0x640 drivers/md/md.c:6158
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
vfs_write+0x612/0xba0 fs/read_write.c:687
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by clearing pending reshape parameters in __md_stop() if no reshape is currently running (mddev->reshape_position == MaxSector). Specifically, reset delta_disks and reshape_backwards to 0, and reset new_level, new_layout, and new_chunk_sectors to level, layout, and chunk_sectors, respectively. If a reshape is actively in progress (mddev->reshape_position != MaxSector), the parameters are preserved so the reshape can resume when the array is restarted.
|