| 0/0 |
2026/09/20 00:37 |
flow |
assessment-security |
19m
Results: map[DenialOfService:false Explanation:**Analysis of the Bug Report**
The bug report indicates a lockdep warning about a "possible circular locking
dependency" involving three lock classes: `fs_reclaim`, `q_usage_counter`, and
`limits_lock`.
By analyzing the stack traces and the source code, we can break down how this
dependency chain is formed:
1. **`fs_reclaim` -> `q_usage_counter`**: This dependency is explicitly
established via a lockdep annotation in `blk_alloc_queue()` to teach lockdep
that memory reclaim might wait for queue IO to complete (queue freeze).
2. **`q_usage_counter` -> `limits_lock`**: This dependency is established by the
NVMe driver. In `nvme_update_ns_info()`, the driver freezes the queue (which
lockdep tracks as acquiring `q_usage_counter`), and while the queue is still
frozen, it calls `nvme_mpath_revalidate_zones()`. This function eventually calls
`queue_limits_start_update()`, which acquires the `limits_lock`.
3. **`limits_lock` -> `fs_reclaim`**: This dependency is established by the SCSI
SD driver. In `sd_revalidate_disk()`, the driver acquires the `limits_lock` (via
`queue_limits_start_update()`) and subsequently calls `sd_read_block_zero()`.
This function performs a `kmalloc(..., GFP_KERNEL)` allocation, which acquires
the `fs_reclaim` pseudo-lock.
**Why this is a False Positive:**
The circular dependency is formed by combining lock dependencies from two
completely different block device drivers (NVMe and SCSI/SD) operating on their
respective, independent request queues. Lockdep groups all `q_usage_counter`
locks into a single lock class and all `limits_lock` locks into another lock
class. Because the locks belong to different device instances (one NVMe queue
and one SD queue), no single thread will ever hold the locks in a way that
causes an actual deadlock. The SD driver never acquires `limits_lock` while its
queue is frozen, and the NVMe driver uses `GFP_NOIO` allocations while holding
its `limits_lock`. Thus, a real deadlock is impossible.
**Security Impact:**
- **Exploitable / Denial of Service:** False. Lockdep is a kernel debugging tool
that is strictly disabled in production builds. Therefore, this warning will not
be printed, nor will it trigger a kernel panic (even if `panic_on_warn` is set,
as the tool itself is inactive). Because it is a false positive, it does not
represent a real deadlock or memory corruption issue. It has no security impact
in production environments.
- **Trigger Mechanisms:** The warning is triggered during block device discovery
and revalidation. This can be achieved by plugging in a USB mass storage device
(Peripheral Trigger) or by hotplugging virtual NVMe/SCSI disks in a virtualized
environment (VM Guest Trigger). It cannot be triggered by unprivileged users or
from within user namespaces, as device hotplugging and discovery require
physical access or root privileges. Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:true RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:true VMHostTrigger:false]
|
| 1/1 |
2026/09/20 00:37 |
action |
syz-repro-to-c-repro |
0m
Results:
|
| 2/1 |
2026/09/20 00:37 |
action |
kernel-checkouter |
0m
Results: map[KernelSrc:/app/workdir/cache/src/13b9f009d23de0512f44ca4ff45a83a71d12d981]
|
| 3/1 |
2026/09/20 00:37 |
action |
kernel-builder |
14m
Results: map[KernelObj:/app/workdir/cache/build/6c87cf3f837e6b035afb657f06dcca4836278dbb]
|
| 4/1 |
2026/09/20 00:52 |
action |
codesearch-prepare |
0m
Results: map[Index:codesearch-index]
|
| 5/1 |
2026/09/20 00:52 |
agent |
expert |
4m
Model:
Results: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:true RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:true VMHostTrigger:false]
Instruction: You are an experienced Linux kernel security engineer. Your task is to analyze given kernel bug report
and determine its security impact based on the following dimensions.
Use the provided tools to examine the source code, check for capability checks (e.g., capable(), ns_capable()),
and understand the nature of the bug. Analyze the given kernel build and configuration.
You can check the kernel config by grepping ".config" file; you can check kernel cmdline by grepping
".config" file for "CONFIG_CMDLINE=". Assume sysctl parameters have default values.
But analyze for the corresponding production build w/o debugging tools enabled (like KASAN, KMSAN, UBSAN).
Try different strategies when analyzing the bug:
- think of ways in which the vulnerable code is unreachable
- or the other way around: try to come up with different ideas of how an unprivileged user can reach the bug
If still unsure err on the side of the bug being non-exploitable/not-accessible.
In the final reply, provide a reasoning for your assessment.
Analysis dimensions:
* Exploitable:
Determine if the bug can result in memory corruption, elevated privileges, or an information leak.
Memory safety issues are almost always exploitable (KASAN or UBSAN reports for use-after-free, out-of-bounds;
refcounting issues, corrupted lists, etc). When kernel is crashing on a completely wild pointer access
(e.g. user-space address, or non-canonical address, but not on NULL or address corresponding to KASAN shadow
for NULL address), including both data accesses and control transfers, that also usually implies possibility
of exploitation. Such reports usually say "unable to handle kernel paging request".
Uses of uninitialized values detected by KMSAN may be exploitable b/c attacker frequently can affect uninit
values with spraying techniques. However, for these exploitability depends on how exactly the uninit value
is used in the code, and what it affects.
Information leaks are exploitable on their own and should be classified as such. A bug that copies kernel
memory contents to userspace (e.g. an out-of-bounds read whose result is returned to the caller, or
uninitialized stack/heap bytes written to a user buffer) is exploitable: it can reveal kernel pointer
values and defeat KASLR, expose sensitive data such as cryptographic keys or other processes' memory, and
serves as a necessary building block in most modern kernel privilege-escalation exploit chains. Do not classify
an information leak as non-exploitable solely because it does not directly cause a memory write or control-flow
hijack; the leak itself is the exploit primitive.
Think of what happens after the bug is triggered. Some bugs cause kernel panic and halt execution,
they are harder to exploit. For example, BUG reports halts the kernel. However, WARNING reports don't halt
execution in production builds. Debug bug detection tools (like KASAN, KMSAN, KCSAN, UBSAN) are also not enabled
in production builds, so attacker can freely exploit these bugs w/o being detected by these tools.
If you see an integer overflow, think how the overflowed value used later (if it's used as allocation size,
or an array index). If you see an out-of-bounds read, think if it's followed by an out-of-bounds write as well.
Some KCSAN data-races may be exploitable by skilled attackers as well. Think what data structures got corrupted
as the result of data races and how. However, note that kernel has lots of "benign" data races that don't lead
to any runtime misbehavior at all.
* Denial Of Service:
Determine if the bug can result in denial-of-service. Most bugs can, since they cause system crash,
hangs, deadlocks, or resource leaks. This is mostly applicable to WARNING bugs that won't cause system crash
in production. For these think what will be consequences of the violation of the kernel assumptions flagged
by the WARNING. In some cases the unexpected condition is also properly handled by the normal control flow
(e.g. with "if (WARN_ON(...))"), these won't cause denial-of-service. If the condition is not handled,
then it may or may not cause denial-of-service.
* Accessible From Unprivileged Processes:
Determine if the bug can be reached from a typical (non-root) user process that does NOT have any special capabilities
(like CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON) or access to device nodes restricted to root.
Assume that unprivileged_bpf_disabled=1, that is eBPF loading is not accessible. However, cBPF (classical BPF)
is still accessible to non-root processes.
Assume that user namespaces are not accessible, that is, the process cannot get the mentioned capabilities even
within a new user namespace (checked by ns_capable() function in the kernel sources).
* Accessible From User Namespaces:
Determine if the bug can be reached within a user-namespace where the process has all capabilities
(including CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_NET_RAW, CAP_PERFMON). Such capabilities are checked with ns_capable()
function in the kernel sources.
* VM Guest Trigger:
Determine if the bug can be triggered from the context of a typical KVM guest (e.g., set up by a QEMU VMM).
Consider accesses to standard Linux host paravirtualized features (virtio-blk, virtio-net, etc.),
and handling of VM exits in the KVM code.
* VM Host Trigger in The Confidential Computing Context:
Determine if the bug can be triggered in a confidential computing guest kernel from the context of a KVM host.
Consider access to standard Linux guest paravirtualized features (virtio-blk, virtio-net, etc.).
* Ethernet Network Trigger:
Determine if the bug can be triggered by processing ingress network Ethernet traffic, either directly (network stack)
or via drivers exposed to network data.
* Other Remote Trigger:
Determine if the bug can be triggered by processing remote traffic other than Ethernet (Wifi, Bluetooth, NFC, etc).
* Peripheral Trigger:
Determine if the bug can be triggered via an untrusted peripheral device that can be physically plugged
into a system, such as a USB device or a niche hardware driver handling external hardware inputs.
This is particularly important for mobile and desktop environments where users can plug in unknown devices.
* Malicious Filesystem Trigger:
Determine if the bug can be triggered by the kernel mounting and parsing a malicious filesystem image.
This is highly critical for Desktop and Mobile environments where external media or downloaded images
might be auto-mounted.
Don't make assumptions about the kernel source code (it may be different from what you assume it is).
Extensively use the provided code access tools (codesearch-*, git-*, grepper, etc)
to examine the actual source code, and confirm any assumptions.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt:
The kernel bug report is:
sd 1:0:0:0: [sdb] Test Unit Ready failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 1:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 1:0:0:0: [sdb] Sense not available.
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Tainted: G L
------------------------------------------------------
kworker/u8:3/49 is trying to acquire lock:
ffffffff8f090420 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:316 [inline]
ffffffff8f090420 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:4636 [inline]
ffffffff8f090420 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:4974 [inline]
ffffffff8f090420 (fs_reclaim){+.+.}-{0:0}, at: __do_kmalloc_node mm/slub.c:5418 [inline]
ffffffff8f090420 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_noprof+0xbc/0x710 mm/slub.c:5444
but task is already holding lock:
ffff888012ece3b8 (&q->limits_lock){+.+.}-{4:4}, at: queue_limits_start_update include/linux/blkdev.h:1101 [inline]
ffff888012ece3b8 (&q->limits_lock){+.+.}-{4:4}, at: sd_revalidate_disk+0xb88/0xb350 drivers/scsi/sd.c:3803
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->limits_lock){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:646 [inline]
__mutex_lock+0x197/0x15a0 kernel/locking/mutex.c:821
queue_limits_start_update include/linux/blkdev.h:1101 [inline]
disk_update_zone_resources block/blk-zoned.c:2067 [inline]
blk_revalidate_disk_zones+0xad9/0x12e0 block/blk-zoned.c:2375
nvme_mpath_revalidate_zones+0x106/0x1c0 drivers/nvme/host/multipath.c:301
nvme_update_ns_info+0x984/0x1200 drivers/nvme/host/core.c:2622
nvme_alloc_ns drivers/nvme/host/core.c:4284 [inline]
nvme_scan_ns+0x2563/0x3640 drivers/nvme/host/core.c:4471
async_run_entry_fn+0x9d/0x430 kernel/async.c:129
process_one_work kernel/workqueue.c:3399 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3482
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3563
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
-> #1 (&q->q_usage_counter(io)#77){++++}-{0:0}:
blk_alloc_queue+0x544/0x690 block/blk-core.c:504
__blk_alloc_disk+0xe3/0x1d0 block/genhd.c:1527
nvme_mpath_alloc_disk+0x5c2/0x8b0 drivers/nvme/host/multipath.c:769
nvme_alloc_ns_head drivers/nvme/host/core.c:4043 [inline]
nvme_init_ns_head drivers/nvme/host/core.c:4144 [inline]
nvme_alloc_ns drivers/nvme/host/core.c:4258 [inline]
nvme_scan_ns+0x1e0f/0x3640 drivers/nvme/host/core.c:4471
async_run_entry_fn+0x9d/0x430 kernel/async.c:129
process_one_work kernel/workqueue.c:3399 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3482
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3563
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
-> #0 (fs_reclaim){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3209 [inline]
check_prevs_add kernel/locking/lockdep.c:3328 [inline]
validate_chain kernel/locking/lockdep.c:3952 [inline]
__lock_acquire+0x164c/0x2de0 kernel/locking/lockdep.c:5288
lock_acquire+0x115/0x350 kernel/locking/lockdep.c:5942
__fs_reclaim_acquire mm/page_alloc.c:4357 [inline]
fs_reclaim_acquire+0x71/0x100 mm/page_alloc.c:4371
might_alloc include/linux/sched/mm.h:316 [inline]
slab_pre_alloc_hook mm/slub.c:4636 [inline]
slab_alloc_node mm/slub.c:4974 [inline]
__do_kmalloc_node mm/slub.c:5418 [inline]
__kmalloc_noprof+0xbc/0x710 mm/slub.c:5444
_kmalloc_noprof include/linux/slab.h:995 [inline]
sd_read_block_zero drivers/scsi/sd.c:3749 [inline]
sd_revalidate_disk+0x177d/0xb350 drivers/scsi/sd.c:3817
sd_probe+0x9f3/0x1180 drivers/scsi/sd.c:4101
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x254/0xae0 drivers/base/dd.c:706
__driver_probe_device+0x1e8/0x360 drivers/base/dd.c:868
driver_probe_device+0x4f/0x240 drivers/base/dd.c:898
__device_attach_driver+0x270/0x410 drivers/base/dd.c:1026
bus_for_each_drv+0x258/0x2f0 drivers/base/bus.c:500
__device_attach_async_helper+0x1e7/0x2b0 drivers/base/dd.c:1055
async_run_entry_fn+0x9d/0x430 kernel/async.c:129
process_one_work kernel/workqueue.c:3399 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3482
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3563
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
other info that might help us debug this:
Chain exists of:
fs_reclaim --> &q->q_usage_counter(io)#77 --> &q->limits_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->limits_lock);
lock(&q->q_usage_counter(io)#77);
lock(&q->limits_lock);
lock(fs_reclaim);
*** DEADLOCK ***
locks held by kworker/u8:3/49: 4, last CPU#0:
#0: ffff88801bedc940 ((wq_completion)async){+.+.}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:309 [inline]
#0: ffff88801bedc940 ((wq_completion)async){+.+.}-{0:0}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#0: ffff88801bedc940 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3364 [inline]
#0: ffff88801bedc940 ((wq_completion)async){+.+.}-{0:0}, at: process_scheduled_works+0x97a/0x1630 kernel/workqueue.c:3482
#1: ffffc90000ba7c40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:309 [inline]
#1: ffffc90000ba7c40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#1: ffffc90000ba7c40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3364 [inline]
#1: ffffc90000ba7c40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_scheduled_works+0x97a/0x1630 kernel/workqueue.c:3482
#2: ffff888075d823c0 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:1104 [inline]
#2: ffff888075d823c0 (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0xa4/0x2b0 drivers/base/dd.c:1041
#3: ffff888012ece3b8 (&q->limits_lock){+.+.}-{4:4}, at: queue_limits_start_update include/linux/blkdev.h:1101 [inline]
#3: ffff888012ece3b8 (&q->limits_lock){+.+.}-{4:4}, at: sd_revalidate_disk+0xb88/0xb350 drivers/scsi/sd.c:3803
stack backtrace:
CPU: 0 UID: 0 PID: 49 Comm: kworker/u8:3 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: async async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_circular_bug+0x2e2/0x300 kernel/locking/lockdep.c:2087
check_noncircular+0x12f/0x150 kernel/locking/lockdep.c:2219
check_prev_add kernel/locking/lockdep.c:3209 [inline]
check_prevs_add kernel/locking/lockdep.c:3328 [inline]
validate_chain kernel/locking/lockdep.c:3952 [inline]
__lock_acquire+0x164c/0x2de0 kernel/locking/lockdep.c:5288
lock_acquire+0x115/0x350 kernel/locking/lockdep.c:5942
__fs_reclaim_acquire mm/page_alloc.c:4357 [inline]
fs_reclaim_acquire+0x71/0x100 mm/page_alloc.c:4371
might_alloc include/linux/sched/mm.h:316 [inline]
slab_pre_alloc_hook mm/slub.c:4636 [inline]
slab_alloc_node mm/slub.c:4974 [inline]
__do_kmalloc_node mm/slub.c:5418 [inline]
__kmalloc_noprof+0xbc/0x710 mm/slub.c:5444
_kmalloc_noprof include/linux/slab.h:995 [inline]
sd_read_block_zero drivers/scsi/sd.c:3749 [inline]
sd_revalidate_disk+0x177d/0xb350 drivers/scsi/sd.c:3817
sd_probe+0x9f3/0x1180 drivers/scsi/sd.c:4101
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x254/0xae0 drivers/base/dd.c:706
__driver_probe_device+0x1e8/0x360 drivers/base/dd.c:868
driver_probe_device+0x4f/0x240 drivers/base/dd.c:898
__device_attach_driver+0x270/0x410 drivers/base/dd.c:1026
bus_for_each_drv+0x258/0x2f0 drivers/base/bus.c:500
__device_attach_async_helper+0x1e7/0x2b0 drivers/base/dd.c:1055
async_run_entry_fn+0x9d/0x430 kernel/async.c:129
process_one_work kernel/workqueue.c:3399 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3482
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3563
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
sd 1:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
sd 1:0:0:0: [sdb] 0-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 1:0:0:0: [sdb] Asking for cache data failed
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI removable disk
Reply: **Analysis of the Bug Report**
The bug report indicates a lockdep warning about a "possible circular locking dependency" involving three lock classes: `fs_reclaim`, `q_usage_counter`, and `limits_lock`.
By analyzing the stack traces and the source code, we can break down how this dependency chain is formed:
1. **`fs_reclaim` -> `q_usage_counter`**: This dependency is explicitly established via a lockdep annotation in `blk_alloc_queue()` to teach lockdep that memory reclaim might wait for queue IO to complete (queue freeze).
2. **`q_usage_counter` -> `limits_lock`**: This dependency is established by the NVMe driver. In `nvme_update_ns_info()`, the driver freezes the queue (which lockdep tracks as acquiring `q_usage_counter`), and while the queue is still frozen, it calls `nvme_mpath_revalidate_zones()`. This function eventually calls `queue_limits_start_update()`, which acquires the `limits_lock`.
3. **`limits_lock` -> `fs_reclaim`**: This dependency is established by the SCSI SD driver. In `sd_revalidate_disk()`, the driver acquires the `limits_lock` (via `queue_limits_start_update()`) and subsequently calls `sd_read_block_zero()`. This function performs a `kmalloc(..., GFP_KERNEL)` allocation, which acquires the `fs_reclaim` pseudo-lock.
**Why this is a False Positive:**
The circular dependency is formed by combining lock dependencies from two completely different block device drivers (NVMe and SCSI/SD) operating on their respective, independent request queues. Lockdep groups all `q_usage_counter` locks into a single lock class and all `limits_lock` locks into another lock class. Because the locks belong to different device instances (one NVMe queue and one SD queue), no single thread will ever hold the locks in a way that causes an actual deadlock. The SD driver never acquires `limits_lock` while its queue is frozen, and the NVMe driver uses `GFP_NOIO` allocations while holding its `limits_lock`. Thus, a real deadlock is impossible.
**Security Impact:**
- **Exploitable / Denial of Service:** False. Lockdep is a kernel debugging tool that is strictly disabled in production builds. Therefore, this warning will not be printed, nor will it trigger a kernel panic (even if `panic_on_warn` is set, as the tool itself is inactive). Because it is a false positive, it does not represent a real deadlock or memory corruption issue. It has no security impact in production environments.
- **Trigger Mechanisms:** The warning is triggered during block device discovery and revalidation. This can be achieved by plugging in a USB mass storage device (Peripheral Trigger) or by hotplugging virtual NVMe/SCSI disks in a virtualized environment (VM Guest Trigger). It cannot be triggered by unprivileged users or from within user namespaces, as device hotplugging and discovery require physical access or root privileges.
|
| 6/2 |
2026/09/20 00:52 |
llm |
expert |
0m
Model:
Tokens:
input: 10224
output: 36
thoughts: 1856
Thoughts: **Analyzing a Potential Circular Locking Dependency**
Okay, so I've got a lockdep warning: a "possible circular locking dependency detected." This looks like it involves `fs_reclaim`, the usage counter `&q->q_usage_counter(io)#77`, and the `&q->limits_lock` spinlock, which is a classic recipe for a DoS. The chain is `fs_reclaim` -> `q_usage_counter` -> `limits_lock` -> `fs_reclaim`.
Looking at the trace, I see that the `limits_lock` is acquired after the usage counter, which makes the circular dependency: the first step is via `nvme_scan_ns`. I see that the same function that uses this lock can call a function that also requires `fs_reclaim`.
The issue is likely due to the acquisition order. The current task holds `limits_lock` and tries to acquire `fs_reclaim`. The trace confirms the dependency chain, with `&q->q_usage_counter(io)#77` relying on `limits_lock` and `fs_reclaim` relying on `q_usage_counter`.
So, the next step is to figure out whether it is actually deadlocking. Based on my experience, I'd say this is a DoS, especially if `panic_on_warn` is set.
The question now is, can an unprivileged user trigger this? The trace points to `nvme_scan_ns` and `sd_probe`β both part of device discovery. If this is USB mass storage, that's likely a peripheral trigger. Otherwise, a loop device or something like that might be an unprivileged trigger. Looking deeper, NVMe discovery uses `nvme_scan_ns`, and SCSI uses `sd_probe`, but I'm thinking the best way to get here is using Syzkaller.
Syzkaller, the way I've seen it, typically uses `vhci_hcd` (USB fuzzing), `dummy_hcd`, or `loop` or `nbd`. Plugged-in USB is a peripheral trigger. User namespaces can't create USB devices, so that's not it. VM guests are likely if we're hotplugging virtual disks. So `vhci_hcd` or `dummy_hcd` are the most likely to get me here.
Let me confirm that it's a real deadlock. Here's what's going on: one CPU acquires `q->limits_lock`, and then tries to get `fs_reclaim`.
Another CPU then wants `q->q_usage_counter`. I'd bet the bank that the first step to allocating the usage counter is acquiring `fs_reclaim`.
So this happens:
- CPU 0: gets `limits_lock`, then `kmalloc(GFP_KERNEL)` (that calls fs_reclaim)
- CPU 1: gets `q_usage_counter`, then `limits_lock`
- CPU 2: gets `fs_reclaim`, then `q_usage_counter`.
Essentially `fs_reclaim` -> `q_usage_counter` in `blk_alloc_queue`. So `blk_alloc_queue` does a `kzalloc_node` (which acquires `fs_reclaim`) and then initializes the usage counter.
... I need to double-check that `fs_reclaim` is *actually* acquired in `blk_alloc_queue` by checking the code. `fs_reclaim` might be a pseudo-lock, but it's called during `kmalloc(GFP_KERNEL)`. If `blk_alloc_queue` calls `percpu_ref_init`, does it acquire q_usage_counter? Let me check `blk_alloc_queue` in `block/blk-core.c`...
|
| 7/2 |
2026/09/20 00:52 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-core.c Name:blk_alloc_queue]
Results: map[SourceCode: 436: struct request_queue *blk_alloc_queue(struct queue_limits *lim, int node_id)
437: {
438: struct request_queue *q;
439: int error;
440:
441: q = kmem_cache_alloc_node(blk_requestq_cachep, GFP_KERNEL | __GFP_ZERO,
442: node_id);
443: if (!q)
444: return ERR_PTR(-ENOMEM);
445:
446: q->last_merge = NULL;
447:
448: q->id = ida_alloc(&blk_queue_ida, GFP_KERNEL);
449: if (q->id < 0) {
450: error = q->id;
451: goto fail_q;
452: }
453:
454: q->stats = blk_alloc_queue_stats();
455: if (!q->stats) {
456: error = -ENOMEM;
457: goto fail_id;
458: }
459:
460: error = blk_set_default_limits(lim);
461: if (error)
462: goto fail_stats;
463: q->limits = *lim;
464:
465: q->node = node_id;
466:
467: atomic_set(&q->nr_active_requests_shared_tags, 0);
468:
469: timer_setup(&q->timeout, blk_rq_timed_out_timer, 0);
470: INIT_WORK(&q->timeout_work, blk_timeout_work);
471: INIT_LIST_HEAD(&q->icq_list);
472:
473: refcount_set(&q->refs, 1);
474: mutex_init(&q->debugfs_mutex);
475: mutex_init(&q->elevator_lock);
476: mutex_init(&q->sysfs_lock);
477: mutex_init(&q->limits_lock);
478: mutex_init(&q->rq_qos_mutex);
479: spin_lock_init(&q->queue_lock);
480:
481: init_waitqueue_head(&q->mq_freeze_wq);
482: mutex_init(&q->mq_freeze_lock);
483:
484: blkg_init_queue(q);
485:
486: /*
487: * Init percpu_ref in atomic mode so that it's faster to shutdown.
488: * See blk_register_queue() for details.
489: */
490: error = percpu_ref_init(&q->q_usage_counter,
491: blk_queue_usage_counter_release,
492: PERCPU_REF_INIT_ATOMIC, GFP_KERNEL);
493: if (error)
494: goto fail_stats;
495: lockdep_register_key(&q->io_lock_cls_key);
496: lockdep_register_key(&q->q_lock_cls_key);
497: lockdep_init_map(&q->io_lockdep_map, "&q->q_usage_counter(io)",
498: &q->io_lock_cls_key, 0);
499: lockdep_init_map(&q->q_lockdep_map, "&q->q_usage_counter(queue)",
500: &q->q_lock_cls_key, 0);
501:
502: /* Teach lockdep about lock ordering (reclaim WRT queue freeze lock). */
503: fs_reclaim_acquire(GFP_KERNEL);
504: rwsem_acquire_read(&q->io_lockdep_map, 0, 0, _RET_IP_);
505: rwsem_release(&q->io_lockdep_map, _RET_IP_);
506: fs_reclaim_release(GFP_KERNEL);
507:
508: q->nr_requests = BLKDEV_DEFAULT_RQ;
509: q->async_depth = BLKDEV_DEFAULT_RQ;
510:
511: return q;
512:
513: fail_stats:
514: blk_free_queue_stats(q->stats);
515: fail_id:
516: ida_free(&blk_queue_ida, q->id);
517: fail_q:
518: kmem_cache_free(blk_requestq_cachep, q);
519: return ERR_PTR(error);
520: }
SourceFile:block/blk-core.c]
|
| 8/2 |
2026/09/20 00:52 |
llm |
expert |
0m
Model:
Tokens:
input: 14331
output: 42
thoughts: 832
Thoughts: **Analyzing Lockdep Ordering in `blk_alloc_queue`**
Okay, so I'm looking at `blk_alloc_queue` and I see this explicit attempt to teach lockdep about the lock ordering. They're adding a dependency: `fs_reclaim` -> `q_usage_counter(io)`. My initial thought was, "Why?" The logic seems to be around memory reclaim potentially waiting on IO completion, which, in turn, waits for the `q_usage_counter` to drop (queue freeze). So, I was thinking about the allocation side of things: if someone holds the counter (doing IO) and tries to allocate with `GFP_KERNEL`, reclaim might have to wait. But, on further inspection, it's about the *dependency*, which is the reverse.
Then I realized that `rwsem_acquire_read` is just *simulating* the lock acquisition for lockdep's sake. It's telling lockdep that the code is structured so that `fs_reclaim` *comes before* `q_usage_counter`. This means, and this is crucial, that if someone *already* holds `q_usage_counter` and then attempts to acquire `fs_reclaim` (like when calling `kmalloc(GFP_KERNEL)`), we *should* get a warning about a potential circular dependency. But, that's wrong. The warning should be about the *opposite* direction.
I need to re-evaluate what I'm looking at. If the dependency is `fs_reclaim` -> `q_usage_counter`, then holding `fs_reclaim` and trying to acquire `q_usage_counter` *is* valid, but holding `q_usage_counter` and trying to acquire `fs_reclaim` *is* not.
I've got to go back to the report. Let's see... the report says: `fs_reclaim` -> `&q->q_usage_counter(io)#77` -> `&q->limits_lock` -> `fs_reclaim`. Oh, wait, the part I was after is: `&q->limits_lock` -> `fs_reclaim`. Okay, so `nvme_update_ns_info` acquires `&q->limits_lock`, that is the key. But I don't see how `nvme_update_ns_info` holds `q->q_usage_counter(io)`. I need to look at the code for that function directly...
|
| 9/2 |
2026/09/20 00:52 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/nvme/host/core.c Name:nvme_update_ns_info]
Results: map[SourceCode:2541: static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_ns_info *info)
2542: {
2543: bool unsupported = false;
2544: int ret;
2545:
2546: switch (info->ids.csi) {
2547: case NVME_CSI_ZNS:
2548: if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
2549: dev_info(ns->ctrl->device,
2550: "block device for nsid %u not supported without CONFIG_BLK_DEV_ZONED\n",
2551: info->nsid);
2552: ret = nvme_update_ns_info_generic(ns, info);
2553: break;
2554: }
2555: ret = nvme_update_ns_info_block(ns, info);
2556: break;
2557: case NVME_CSI_NVM:
2558: ret = nvme_update_ns_info_block(ns, info);
2559: break;
2560: default:
2561: dev_info(ns->ctrl->device,
2562: "block device for nsid %u not supported (csi %u)\n",
2563: info->nsid, info->ids.csi);
2564: ret = nvme_update_ns_info_generic(ns, info);
2565: break;
2566: }
2567:
2568: /*
2569: * If probing fails due an unsupported feature, hide the block device,
2570: * but still allow other access.
2571: */
2572: if (ret == -ENODEV) {
2573: ns->disk->flags |= GENHD_FL_HIDDEN;
2574: set_bit(NVME_NS_READY, &ns->flags);
2575: unsupported = true;
2576: ret = 0;
2577: }
2578:
2579: if (!ret && nvme_ns_head_multipath(ns->head)) {
2580: struct queue_limits *ns_lim = &ns->disk->queue->limits;
2581: struct queue_limits lim;
2582: unsigned int memflags;
2583:
2584: lim = queue_limits_start_update(ns->head->disk->queue);
2585: memflags = blk_mq_freeze_queue(ns->head->disk->queue);
2586: /*
2587: * queue_limits mixes values that are the hardware limitations
2588: * for bio splitting with what is the device configuration.
2589: *
2590: * For NVMe the device configuration can change after e.g. a
2591: * Format command, and we really want to pick up the new format
2592: * value here. But we must still stack the queue limits to the
2593: * least common denominator for multipathing to split the bios
2594: * properly.
2595: *
2596: * To work around this, we explicitly set the device
2597: * configuration to those that we just queried, but only stack
2598: * the splitting limits in to make sure we still obey possibly
2599: * lower limitations of other controllers.
2600: */
2601: lim.logical_block_size = ns_lim->logical_block_size;
2602: lim.physical_block_size = ns_lim->physical_block_size;
2603: lim.io_min = ns_lim->io_min;
2604: lim.io_opt = ns_lim->io_opt;
2605: queue_limits_stack_bdev(&lim, ns->disk->part0, 0,
2606: ns->head->disk->disk_name);
2607: if (lim.features & BLK_FEAT_ZONED)
2608: nvme_stack_zone_resources(&lim, ns_lim);
2609: if (unsupported)
2610: ns->head->disk->flags |= GENHD_FL_HIDDEN;
2611: else
2612: nvme_init_integrity(ns->head, &lim, info);
2613: lim.max_write_streams = ns_lim->max_write_streams;
2614: lim.write_stream_granularity = ns_lim->write_stream_granularity;
2615: ret = queue_limits_commit_update(ns->head->disk->queue, &lim);
2616: if (ret)
2617: goto unfreeze_head_queue;
2618:
2619: set_capacity_and_notify(ns->head->disk, get_capacity(ns->disk));
2620: set_disk_ro(ns->head->disk, nvme_ns_is_readonly(ns, info));
2621: nvme_mpath_revalidate_paths(ns->head);
2622: ret = nvme_mpath_revalidate_zones(ns->head);
2623:
2624: unfreeze_head_queue:
2625: blk_mq_unfreeze_queue(ns->head->disk->queue, memflags);
2626: }
2627:
2628: return ret;
2629: }
SourceFile:drivers/nvme/host/core.c]
|
| 10/2 |
2026/09/20 00:52 |
llm |
expert |
0m
Model:
Tokens:
input: 17277
output: 38
thoughts: 1007
Thoughts: **Analyzing a Potential Lock Ordering Issue in NVMe Update Process**
Okay, let's break this down. I'm looking at `nvme_update_ns_info` and I see that it calls `queue_limits_start_update`. That function acquires `&q->limits_lock`. Simultaneously, `blk_mq_freeze_queue` is called and tries to acquire `q_usage_counter`.
The issue, as I understand it, is that `blk_mq_freeze_queue` doesn't seem to track `q_usage_counter` in a way that the lockdep tool recognizes as an established lock dependency.
The report highlights a dependency: `#2 (&q->limits_lock){+.+.}-{4:4}` depends on `#1 (&q->q_usage_counter(io)#77){++++}-{0:0}` which is `fs_reclaim` -> `q_usage_counter`. And also that `#2` depends on `q_usage_counter` -> `limits_lock`.
I'm trying to determine where these dependencies are established. The report indicates that `blk_alloc_queue` establishes the relationship of `fs_reclaim` -> `q_usage_counter`. But now, I want to find where `q_usage_counter` -> `limits_lock` is established.
The report clearly traces `limits_lock` acquisition back to `queue_limits_start_update`, which is called directly within `nvme_update_ns_info`. However, `nvme_mpath_revalidate_zones` is called *after* `queue_limits_start_update`. Let's look at the code:
Inside `nvme_update_ns_info`, `queue_limits_start_update` is called, followed by `blk_mq_freeze_queue`. Then, after some operations, `queue_limits_commit_update` is called.
The key is that `queue_limits_commit_update` *releases* `limits_lock`. I need to check how the lock is released and if there is some issue with the order in which the locks are being acquired and released, especially in the context of the subsequent call to `nvme_mpath_revalidate_zones`. This looks like a classic potential lock ordering problem. I'll need to dig deeper into the code of `queue_limits_commit_update`, especially considering the sequence of calls and the potential for a deadlock if the lock acquisitions and releases are not synchronized correctly.
|
| 11/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-settings.c Name:queue_limits_commit_update]
Results: map[SourceCode: 534: /**
535: * queue_limits_commit_update - commit an atomic update of queue limits
536: * @q: queue to update
537: * @lim: limits to apply
538: *
539: * Apply the limits in @lim that were obtained from queue_limits_start_update()
540: * and updated by the caller to @q. The caller must have frozen the queue or
541: * ensure that there are no outstanding I/Os by other means.
542: *
543: * Returns 0 if successful, else a negative error code.
544: */
545: int queue_limits_commit_update(struct request_queue *q,
546: struct queue_limits *lim)
547: {
548: int error;
549:
550: lockdep_assert_held(&q->limits_lock);
551:
552: error = blk_validate_limits(lim);
553: if (error)
554: goto out_unlock;
555:
556: #ifdef CONFIG_BLK_INLINE_ENCRYPTION
557: if (q->crypto_profile && lim->integrity.tag_size) {
558: pr_warn("blk-integrity: Integrity and hardware inline encryption are not supported together.\n");
559: error = -EINVAL;
560: goto out_unlock;
561: }
562: #endif
563:
564: q->limits = *lim;
565: if (q->disk)
566: blk_apply_bdi_limits(q->disk->bdi, lim);
567: out_unlock:
568: mutex_unlock(&q->limits_lock);
569: return error;
570: }
SourceFile:block/blk-settings.c]
|
| 12/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 19427
output: 39
thoughts: 97
Thoughts: **A Deep Dive into Resource Management**
Okay, so `queue_limits_commit_update` just released `limits_lock`, which is good. That's the expected behavior. But, hold on a second... `nvme_mpath_revalidate_zones`... It looks like it calls `blk_revalidate_disk_zones`, and that function then calls `disk_update_zone_resources`. And *that* calls `queue_limits_start_update` again! That's a potential recursive lock situation that could deadlock the process! We've got a potential circular dependency on our hands.
I need to investigate `nvme_mpath_revalidate_zones` and `blk_revalidate_disk_zones` more closely. I suspect this interplay between zone revalidation and the queue limits update could be the culprit and the cause of the lock contention. I'll focus on how they acquire and release resources, and specifically, look at how the locks are handled between these functions, and when updates are requested, to determine if we've uncovered a race condition, or a logical flaw in the update/validation process.
|
| 13/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-zoned.c Name:blk_revalidate_disk_zones]
Results: map[SourceCode:2301: /**
2302: * blk_revalidate_disk_zones - (re)allocate and initialize zone write plugs
2303: * @disk: Target disk
2304: *
2305: * Helper function for low-level device drivers to check, (re) allocate and
2306: * initialize resources used for managing zoned disks. This function should
2307: * normally be called by blk-mq based drivers when a zoned gendisk is probed
2308: * and when the zone configuration of the gendisk changes (e.g. after a format).
2309: * Before calling this function, the device driver must already have set the
2310: * device zone size (chunk_sector limit) and the max zone append limit.
2311: * BIO based drivers can also use this function as long as the device queue
2312: * can be safely frozen.
2313: */
2314: int blk_revalidate_disk_zones(struct gendisk *disk)
2315: {
2316: struct request_queue *q = disk->queue;
2317: sector_t zone_sectors = q->limits.chunk_sectors;
2318: sector_t capacity = get_capacity(disk);
2319: struct blk_revalidate_zone_args args = { };
2320: unsigned int memflags, noio_flag;
2321: struct blk_report_zones_args rep_args = {
2322: .cb = blk_revalidate_zone_cb,
2323: .data = &args,
2324: };
2325: int ret = -ENOMEM;
2326:
2327: if (WARN_ON_ONCE(!blk_queue_is_zoned(q)))
2328: return -EIO;
2329:
2330: if (!capacity)
2331: return -ENODEV;
2332:
2333: /*
2334: * Checks that the device driver indicated a valid zone size and that
2335: * the max zone append limit is set.
2336: */
2337: if (!zone_sectors || !is_power_of_2(zone_sectors)) {
2338: pr_warn("%s: Invalid non power of two zone size (%llu)\n",
2339: disk->disk_name, zone_sectors);
2340: return -ENODEV;
2341: }
2342:
2343: /*
2344: * Ensure that all memory allocations in this context are done as if
2345: * GFP_NOIO was specified.
2346: */
2347: noio_flag = memalloc_noio_save();
2348: ret = disk_revalidate_zone_resources(disk, &args);
2349: if (ret) {
2350: memalloc_noio_restore(noio_flag);
2351: return ret;
2352: }
2353:
2354: ret = disk->fops->report_zones(disk, 0, UINT_MAX, &rep_args);
2355: if (!ret) {
2356: pr_warn("%s: No zones reported\n", disk->disk_name);
2357: ret = -ENODEV;
2358: }
2359: memalloc_noio_restore(noio_flag);
2360:
2361: if (ret <= 0)
2362: goto free_resources;
2363:
2364: /*
2365: * If zones where reported, make sure that the entire disk capacity
2366: * has been checked.
2367: */
2368: if (args.sector != capacity) {
2369: pr_warn("%s: Missing zones from sector %llu\n",
2370: disk->disk_name, args.sector);
2371: ret = -ENODEV;
2372: goto free_resources;
2373: }
2374:
2375: ret = disk_update_zone_resources(disk, &args);
2376: if (ret)
2377: goto free_resources;
2378:
2379: return 0;
2380:
2381: free_resources:
2382: pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
2383:
2384: kfree(args.zones_cond);
2385: memflags = blk_mq_freeze_queue(q);
2386: disk_free_zone_resources(disk);
2387: blk_mq_unfreeze_queue(q, memflags);
2388:
2389: return ret;
2390: }
SourceFile:block/blk-zoned.c]
|
| 14/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 21174
output: 38
thoughts: 767
Thoughts: **Analyzing a Potential Locking Issue in the NVMe Zone Handling**
Okay, let's break this down. My initial thought was: I see `blk_revalidate_disk_zones` is calling `disk_update_zone_resources`, which is then calling `queue_limits_start_update`. Standard stuff, updating the disk's zone resources and probably handling capacity changes.
But hang on. This `blk_revalidate_disk_zones` call is coming from `nvme_mpath_revalidate_zones`. *That* function, `nvme_mpath_revalidate_zones`, is being called from `nvme_update_ns_info`. Now we're getting somewhere interesting. Looking at the code in `nvme_update_ns_info`, I see the lock hierarchy:
`queue_limits_start_update` is being called which means we are trying to acquire the `limits_lock`
First the queue is frozen: `blk_mq_freeze_queue` is called and later unfrozen with `blk_mq_unfreeze_queue`. Critically, `queue_limits_commit_update` releases the `limits_lock`, but the `blk_mq_unfreeze_queue` call is deferred until `unfreeze_head_queue`. This means the `q_usage_counter` associated with the queue is *frozen* during the call to `nvme_mpath_revalidate_zones`.
Here's the problem: `nvme_mpath_revalidate_zones` calls `blk_revalidate_disk_zones`, which calls `disk_update_zone_resources`, which then calls `queue_limits_start_update`. This means we have a lock dependency.
The situation is like this:
1. `blk_mq_freeze_queue` holds the `q_usage_counter`. Lockdep is tracking this. It's waiting for `q_usage_counter` to drop to 0. And importantly prevents new I/O.
2. `queue_limits_start_update` acquires the `limits_lock`.
This shows `q_usage_counter` *must* be acquired *before* `limits_lock`.
The problem is the report: It looks like `kworker/u8:3/49` is trying to get `fs_reclaim` while already holding `limits_lock`... That's a classic deadlock situation. So, we've got `limits_lock` -> `fs_reclaim`.
Now, where does the `limits_lock` -> `fs_reclaim` dependency come from? The report points at `sd_revalidate_disk` in the SCSI driver... This needs further investigation. I'll need to go through the code of `sd_revalidate_disk` to understand how `fs_reclaim` is being acquired while `limits_lock` is held. I suspect there's a potential path for filesystem operations during device revalidation that's triggering this conflict. Time to dive deeper into the SCSI and filesystem interaction.
|
| 15/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/scsi/sd.c Name:sd_revalidate_disk]
Results: map[SourceCode:3768: /**
3769: * sd_revalidate_disk - called the first time a new disk is seen,
3770: * performs disk spin up, read_capacity, etc.
3771: * @disk: struct gendisk we care about
3772: **/
3773: static void sd_revalidate_disk(struct gendisk *disk)
3774: {
3775: struct scsi_disk *sdkp = scsi_disk(disk);
3776: struct scsi_device *sdp = sdkp->device;
3777: sector_t old_capacity = sdkp->capacity;
3778: struct queue_limits *lim = NULL;
3779: unsigned char *buffer = NULL;
3780: unsigned int dev_max;
3781: int err;
3782:
3783: SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
3784: "sd_revalidate_disk\n"));
3785:
3786: /*
3787: * If the device is offline, don't try and read capacity or any
3788: * of the other niceties.
3789: */
3790: if (!scsi_device_online(sdp))
3791: return;
3792:
3793: lim = kmalloc_obj(*lim);
3794: if (!lim)
3795: return;
3796:
3797: buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
3798: if (!buffer)
3799: goto out;
3800:
3801: sd_spinup_disk(sdkp);
3802:
3803: *lim = queue_limits_start_update(sdkp->disk->queue);
3804:
3805: /*
3806: * Without media there is no reason to ask; moreover, some devices
3807: * react badly if we do.
3808: */
3809: if (sdkp->media_present) {
3810: sd_read_capacity(sdkp, lim, buffer);
3811: /*
3812: * Some USB/UAS devices return generic values for mode pages
3813: * until the media has been accessed. Trigger a READ operation
3814: * to force the device to populate mode pages.
3815: */
3816: if (sdp->read_before_ms)
3817: sd_read_block_zero(sdkp);
3818: /*
3819: * set the default to rotational. All non-rotational devices
3820: * support the block characteristics VPD page, which will
3821: * cause this to be updated correctly and any device which
3822: * doesn't support it should be treated as rotational.
3823: */
3824: lim->features |= (BLK_FEAT_ROTATIONAL | BLK_FEAT_ADD_RANDOM);
3825:
3826: if (scsi_device_supports_vpd(sdp)) {
3827: sd_read_block_provisioning(sdkp);
3828: sd_read_block_limits(sdkp, lim);
3829: sd_read_block_limits_ext(sdkp);
3830: sd_read_block_characteristics(sdkp, lim);
3831: sd_zbc_read_zones(sdkp, lim, buffer);
3832: }
3833:
3834: sd_config_discard(sdkp, lim, sd_discard_mode(sdkp));
3835:
3836: sd_print_capacity(sdkp, old_capacity);
3837:
3838: sd_read_write_protect_flag(sdkp, buffer);
3839: sd_read_cache_type(sdkp, buffer);
3840: sd_read_io_hints(sdkp, buffer);
3841: sd_read_app_tag_own(sdkp, buffer);
3842: sd_read_write_same(sdkp, buffer);
3843: sd_read_security(sdkp, buffer);
3844: sd_config_protection(sdkp, lim);
3845: }
3846:
3847: /*
3848: * We now have all cache related info, determine how we deal
3849: * with flush requests.
3850: */
3851: sd_set_flush_flag(sdkp, lim);
3852:
3853: /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
3854: dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
3855:
3856: /* Some devices report a maximum block count for READ/WRITE requests. */
3857: dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
3858: lim->max_dev_sectors = logical_to_sectors(sdp, dev_max);
3859:
3860: if (sd_validate_min_xfer_size(sdkp))
3861: lim->io_min = logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3862: else
3863: lim->io_min = 0;
3864:
3865: /*
3866: * Limit default to SCSI host optimal sector limit if set. There may be
3867: * an impact on performance for when the size of a request exceeds this
3868: * host limit.
3869: */
3870: lim->io_opt = sdp->host->opt_sectors << SECTOR_SHIFT;
3871: if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
3872: lim->io_opt = min_not_zero(lim->io_opt,
3873: logical_to_bytes(sdp, sdkp->opt_xfer_blocks));
3874: }
3875:
3876: sdkp->first_scan = 0;
3877:
3878: set_capacity_and_notify(disk, logical_to_sectors(sdp, sdkp->capacity));
3879: sd_config_write_same(sdkp, lim);
3880:
3881: err = queue_limits_commit_update_frozen(sdkp->disk->queue, lim);
3882: if (err)
3883: goto out;
3884:
3885: /*
3886: * Query concurrent positioning ranges after
3887: * queue_limits_commit_update() unlocked q->limits_lock to avoid
3888: * deadlock with q->sysfs_dir_lock and q->sysfs_lock.
3889: */
3890: if (sdkp->media_present && scsi_device_supports_vpd(sdp))
3891: sd_read_cpr(sdkp);
3892:
3893: /*
3894: * For a zoned drive, revalidating the zones can be done only once
3895: * the gendisk capacity is set. So if this fails, set back the gendisk
3896: * capacity to 0.
3897: */
3898: if (sd_zbc_revalidate_zones(sdkp))
3899: set_capacity_and_notify(disk, 0);
3900:
3901: out:
3902: kfree(buffer);
3903: kfree(lim);
3904:
3905: }
SourceFile:drivers/scsi/sd.c]
|
| 16/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 24825
output: 39
thoughts: 216
Thoughts: **My Analysis of `sd_revalidate_disk` and Potential Concurrency Issues**
Okay, here's what's going on in this `sd_revalidate_disk` function. I see that it begins by updating the queue limits using `queue_limits_start_update`, which makes sense. Crucially, I know that this function acquires `&q->limits_lock`. This is a critical point to note for potential concurrency issues.
Then, there's a check for media presence. If media is present, the code calls `sd_read_capacity` and subsequently, if `sdp->read_before_ms` is set, calls `sd_read_block_zero`.
My immediate concern is the locking order. `queue_limits_start_update` grabs the `limits_lock`, and then `sd_read_block_zero` is called. It's essential to understand exactly what `sd_read_block_zero` *does*, especially with regards to locking, because we have a potential locking hierarchy issue. This could lead to a deadlock scenario if `sd_read_block_zero` attempts to acquire a lock that's already held elsewhere. So, I need to dive into the code for `sd_read_block_zero` *right now* to see what locks, if any, it is using or attempting to acquire. This is a potential point of failure. I need to understand whether this function uses locks that overlap with those held earlier.
|
| 17/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/scsi/sd.c Name:sd_read_block_zero]
Results: map[SourceCode:3743: static void sd_read_block_zero(struct scsi_disk *sdkp)
3744: {
3745: struct scsi_device *sdev = sdkp->device;
3746: unsigned int buf_len = sdev->sector_size;
3747: u8 *buffer, cmd[16] = { };
3748:
3749: buffer = kmalloc(buf_len, GFP_KERNEL);
3750: if (!buffer)
3751: return;
3752:
3753: if (sdev->use_16_for_rw) {
3754: cmd[0] = READ_16;
3755: put_unaligned_be64(0, &cmd[2]); /* Logical block address 0 */
3756: put_unaligned_be32(1, &cmd[10]);/* Transfer 1 logical block */
3757: } else {
3758: cmd[0] = READ_10;
3759: put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */
3760: put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */
3761: }
3762:
3763: scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, buffer, buf_len,
3764: SD_TIMEOUT, sdkp->max_retries, NULL);
3765: kfree(buffer);
3766: }
SourceFile:drivers/scsi/sd.c]
|
| 18/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 25856
output: 44
thoughts: 2344
Thoughts: **Analyzing a Potential Block Device Locking Cycle**
Okay, here's the breakdown of my thought process. I'm looking at a lockdep report that highlights a potential circular dependency involving `fs_reclaim`, `q_usage_counter`, and `limits_lock` within the block device layer. Initially, I saw that `sd_read_block_zero` calls `kmalloc`, which I know can trigger memory reclaim (`fs_reclaim`). This call happens while holding the `limits_lock` on the queue. This got my attention because I know that `fs_reclaim` can submit IOs, so I started tracing the dependencies.
The key is that I need to confirm the order of lock acquisition. The report indicates `fs_reclaim` depends on `q_usage_counter`. Looking at the NVMe driver, specifically `nvme_update_ns_info`, I see a sequence: `queue_limits_start_update` (which acquires `limits_lock`), and then `blk_mq_freeze_queue` (which waits on `q_usage_counter` to drop). That seems like `limits_lock` is acquired before `q_usage_counter` is frozen. However, I noticed that `nvme_update_ns_info` releases the `limits_lock` via `queue_limits_commit_update`, but then goes on to call other functions that can trigger `queue_limits_start_update`, thus re-acquiring `limits_lock` *while* `q_usage_counter` is frozen. This is the crucial point for the potential cycle.
Now, my initial concern was that it's a *real* deadlock with a circular dependency: `fs_reclaim` -> `q_usage_counter` -> `limits_lock` -> `fs_reclaim`. I need to figure out where exactly the dependencies are created, starting with what I know, which is that `sd_revalidate_disk` acquires `limits_lock`, then calls `sd_read_block_zero` and `kmalloc`, and thus acquires `fs_reclaim`.
So, I tried to construct a scenario. In my mind, I'm imagining how this chain of events would play out across two CPUs. CPU0 is in `sd_revalidate_disk`, holding `limits_lock`, triggers memory reclaim which needs to submit IO, therefore requiring `q_usage_counter`. Meanwhile, CPU1 is in `nvme_update_ns_info`, which acquires the `limits_lock` and freezes the `q_usage_counter`.
However, the key question arises: Are we talking about the *same* device, or different ones? The crucial thing to remember with lockdep is that it analyzes *lock classes*. If the locks are in the same class, then lockdep sees a cycle, *even if* the locks are on different devices. In this case, I have to figure out if there's a possibility of the lock classes being the same.
And it seems that the locking behavior with NVMe on different devices, in the scenario I constructed, *doesn't* create a true deadlock because `limits_lock` is device-specific. So CPU1 releases `limits_lock` of the NVMe device, and then re-acquires it. CPU0 might try to acquire the `q_usage_counter` of the NVMe device while CPU1 has frozen it. But, this doesn't cause a deadlock.
My conclusion is that this is *not* a real deadlock between *different* devices, because the lock dependencies are device-specific and the queue freezing and revalidation can happen independently. However, a potential problem might exist if the two devices are of the *same* type. I'll need to examine if `sd_revalidate_disk` and `nvme_update_ns_info` can actually operate on the *same* underlying device, or, if a similar problematic sequence can arise even within the same type of device by examining `nvme_update_ns_info`, and also the SCSI code.
|
| 19/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/nvme/host/core.c Name:nvme_update_ns_info_block]
Results: map[SourceCode:2408: static int nvme_update_ns_info_block(struct nvme_ns *ns,
2409: struct nvme_ns_info *info)
2410: {
2411: struct queue_limits lim;
2412: struct nvme_id_ns_nvm *nvm = NULL;
2413: struct nvme_zone_info zi = {};
2414: struct nvme_id_ns *id;
2415: unsigned int memflags;
2416: sector_t capacity;
2417: unsigned lbaf;
2418: int ret;
2419:
2420: ret = nvme_identify_ns(ns->ctrl, info->nsid, &id);
2421: if (ret)
2422: return ret;
2423:
2424: if (id->ncap == 0) {
2425: /* namespace not allocated or attached */
2426: info->is_removed = true;
2427: ret = -ENXIO;
2428: goto out;
2429: }
2430: lbaf = nvme_lbaf_index(id->flbas);
2431:
2432: if (nvme_id_cns_ok(ns->ctrl, NVME_ID_CNS_CS_NS)) {
2433: ret = nvme_identify_ns_nvm(ns->ctrl, info->nsid, &nvm);
2434: if (ret < 0)
2435: goto out;
2436: }
2437:
2438: if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
2439: ns->head->ids.csi == NVME_CSI_ZNS) {
2440: ret = nvme_query_zone_info(ns, lbaf, &zi);
2441: if (ret < 0)
2442: goto out;
2443: }
2444:
2445: if (ns->ctrl->ctratt & NVME_CTRL_ATTR_FDPS) {
2446: ret = nvme_query_fdp_info(ns, info);
2447: if (ret < 0)
2448: goto out;
2449: }
2450:
2451: if (nvme_invalid_lba_sz(le64_to_cpu(id->nsze),
2452: id->lbaf[lbaf].ds - SECTOR_SHIFT, &capacity)) {
2453: dev_warn_once(ns->ctrl->device,
2454: "invalid LBA data size %u, skipping namespace\n",
2455: id->lbaf[lbaf].ds);
2456: ret = -ENODEV;
2457: goto out;
2458: }
2459:
2460: lim = queue_limits_start_update(ns->disk->queue);
2461:
2462: memflags = blk_mq_freeze_queue(ns->disk->queue);
2463: ns->head->lba_shift = id->lbaf[lbaf].ds;
2464: ns->head->nuse = le64_to_cpu(id->nuse);
2465: nvme_set_ctrl_limits(ns->ctrl, &lim, false);
2466: nvme_configure_metadata(ns->ctrl, ns->head, id, nvm, info);
2467: nvme_set_chunk_sectors(ns, id, &lim);
2468: if (!nvme_update_disk_info(ns, id, nvm, &lim))
2469: capacity = 0;
2470:
2471: if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
2472: ns->head->ids.csi == NVME_CSI_ZNS)
2473: nvme_update_zone_info(ns, &lim, &zi);
2474:
2475: if ((ns->ctrl->vwc & NVME_CTRL_VWC_PRESENT) && !info->no_vwc)
2476: lim.features |= BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA;
2477: else
2478: lim.features &= ~(BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA);
2479:
2480: if (info->is_rotational)
2481: lim.features |= BLK_FEAT_ROTATIONAL;
2482:
2483: /*
2484: * Register a metadata profile for PI, or the plain non-integrity NVMe
2485: * metadata masquerading as Type 0 if supported, otherwise reject block
2486: * I/O to namespaces with metadata except when the namespace supports
2487: * PI, as it can strip/insert in that case.
2488: */
2489: if (!nvme_init_integrity(ns->head, &lim, info))
2490: capacity = 0;
2491:
2492: lim.max_write_streams = ns->head->nr_plids;
2493: if (lim.max_write_streams)
2494: lim.write_stream_granularity = min(info->runs, U32_MAX);
2495: else
2496: lim.write_stream_granularity = 0;
2497:
2498: /*
2499: * Only set the DEAC bit if the device guarantees that reads from
2500: * deallocated data return zeroes. While the DEAC bit does not
2501: * require that, it must be a no-op if reads from deallocated data
2502: * do not return zeroes.
2503: */
2504: if ((id->dlfeat & 0x7) == 0x1 && (id->dlfeat & (1 << 3))) {
2505: ns->head->features |= NVME_NS_DEAC;
2506: lim.max_hw_wzeroes_unmap_sectors = lim.max_write_zeroes_sectors;
2507: }
2508:
2509: ret = queue_limits_commit_update(ns->disk->queue, &lim);
2510: if (ret) {
2511: blk_mq_unfreeze_queue(ns->disk->queue, memflags);
2512: goto out;
2513: }
2514:
2515: set_capacity_and_notify(ns->disk, capacity);
2516: set_disk_ro(ns->disk, nvme_ns_is_readonly(ns, info));
2517: set_bit(NVME_NS_READY, &ns->flags);
2518: blk_mq_unfreeze_queue(ns->disk->queue, memflags);
2519:
2520: if (blk_queue_is_zoned(ns->queue)) {
2521: ret = blk_revalidate_disk_zones(ns->disk);
2522: if (ret && !nvme_first_scan(ns->disk))
2523: goto out;
2524: }
2525:
2526: ret = 0;
2527: out:
2528: kfree(nvm);
2529: kfree(id);
2530: return ret;
2531: }
SourceFile:drivers/nvme/host/core.c]
|
| 20/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 31214
output: 42
thoughts: 327
Thoughts: **My Concerns Regarding Queue Freezing in NVMe Namespace Updates**
Okay, so I'm looking at `nvme_update_ns_info_block` in the NVMe driver. It's that function, right? Specifically, I'm focused on how we're handling the queue freezing and unfreezing. I see the typical `queue_limits_start_update` and `blk_mq_freeze_queue` calls, setting up the necessary locks and preventing new IO from hitting the queue while we update namespace information. We update the capacity, set the read-only flag, and mark the namespace as ready β standard stuff.
But then, and this is where my Spidey sense is tingling, I see `blk_mq_unfreeze_queue` called *before* `blk_revalidate_disk_zones`. Wait a minute... that means we're unfreezing the queue's usage counter *before* revalidating the disk zones! That seems... potentially problematic. The timing feels off. We might have a race condition there, with new IO possibly starting while the zone revalidation is in progress. This could lead to a weird state, unexpected behavior, and potentially data corruption if not handled carefully.
I'm thinking about the implications. What happens when dealing with multipath and how does this `nvme_update_ns_info` relate? I'm going to take another look at the `nvme_update_ns_info` function to see if it follows this same pattern, or if it handles the queue freezing and unfreezing differently. Gotta be sure the multipath case is consistent.
|
| 21/2 |
2026/09/20 00:53 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/nvme/host/core.c Name:nvme_update_ns_info]
Results: map[SourceCode:2541: static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_ns_info *info)
2542: {
2543: bool unsupported = false;
2544: int ret;
2545:
2546: switch (info->ids.csi) {
2547: case NVME_CSI_ZNS:
2548: if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
2549: dev_info(ns->ctrl->device,
2550: "block device for nsid %u not supported without CONFIG_BLK_DEV_ZONED\n",
2551: info->nsid);
2552: ret = nvme_update_ns_info_generic(ns, info);
2553: break;
2554: }
2555: ret = nvme_update_ns_info_block(ns, info);
2556: break;
2557: case NVME_CSI_NVM:
2558: ret = nvme_update_ns_info_block(ns, info);
2559: break;
2560: default:
2561: dev_info(ns->ctrl->device,
2562: "block device for nsid %u not supported (csi %u)\n",
2563: info->nsid, info->ids.csi);
2564: ret = nvme_update_ns_info_generic(ns, info);
2565: break;
2566: }
2567:
2568: /*
2569: * If probing fails due an unsupported feature, hide the block device,
2570: * but still allow other access.
2571: */
2572: if (ret == -ENODEV) {
2573: ns->disk->flags |= GENHD_FL_HIDDEN;
2574: set_bit(NVME_NS_READY, &ns->flags);
2575: unsupported = true;
2576: ret = 0;
2577: }
2578:
2579: if (!ret && nvme_ns_head_multipath(ns->head)) {
2580: struct queue_limits *ns_lim = &ns->disk->queue->limits;
2581: struct queue_limits lim;
2582: unsigned int memflags;
2583:
2584: lim = queue_limits_start_update(ns->head->disk->queue);
2585: memflags = blk_mq_freeze_queue(ns->head->disk->queue);
2586: /*
2587: * queue_limits mixes values that are the hardware limitations
2588: * for bio splitting with what is the device configuration.
2589: *
2590: * For NVMe the device configuration can change after e.g. a
2591: * Format command, and we really want to pick up the new format
2592: * value here. But we must still stack the queue limits to the
2593: * least common denominator for multipathing to split the bios
2594: * properly.
2595: *
2596: * To work around this, we explicitly set the device
2597: * configuration to those that we just queried, but only stack
2598: * the splitting limits in to make sure we still obey possibly
2599: * lower limitations of other controllers.
2600: */
2601: lim.logical_block_size = ns_lim->logical_block_size;
2602: lim.physical_block_size = ns_lim->physical_block_size;
2603: lim.io_min = ns_lim->io_min;
2604: lim.io_opt = ns_lim->io_opt;
2605: queue_limits_stack_bdev(&lim, ns->disk->part0, 0,
2606: ns->head->disk->disk_name);
2607: if (lim.features & BLK_FEAT_ZONED)
2608: nvme_stack_zone_resources(&lim, ns_lim);
2609: if (unsupported)
2610: ns->head->disk->flags |= GENHD_FL_HIDDEN;
2611: else
2612: nvme_init_integrity(ns->head, &lim, info);
2613: lim.max_write_streams = ns_lim->max_write_streams;
2614: lim.write_stream_granularity = ns_lim->write_stream_granularity;
2615: ret = queue_limits_commit_update(ns->head->disk->queue, &lim);
2616: if (ret)
2617: goto unfreeze_head_queue;
2618:
2619: set_capacity_and_notify(ns->head->disk, get_capacity(ns->disk));
2620: set_disk_ro(ns->head->disk, nvme_ns_is_readonly(ns, info));
2621: nvme_mpath_revalidate_paths(ns->head);
2622: ret = nvme_mpath_revalidate_zones(ns->head);
2623:
2624: unfreeze_head_queue:
2625: blk_mq_unfreeze_queue(ns->head->disk->queue, memflags);
2626: }
2627:
2628: return ret;
2629: }
SourceFile:drivers/nvme/host/core.c]
|
| 22/2 |
2026/09/20 00:53 |
llm |
expert |
0m
Model:
Tokens:
input: 33456
output: 45
thoughts: 243
Thoughts: **Deadlock Detected? Deep Dive into NVMe Namespace Update**
Okay, here's what's running through my mind as I analyze this NVMe code. I've spotted something interesting in `nvme_update_ns_info`. It appears that `blk_mq_unfreeze_queue` is *happening after* `nvme_mpath_revalidate_zones` is invoked! That's... not ideal.
What this implies is that the `q_usage_counter` is still frozen when `nvme_mpath_revalidate_zones` is executed. And, as we know, `nvme_mpath_revalidate_zones` dives deeper, calling `blk_revalidate_disk_zones`, which then calls `disk_update_zone_resources`, and *that* calls `queue_limits_start_update`!
So, `queue_limits_start_update` β which, crucially, acquires the `limits_lock` β is being called while the `q_usage_counter` is still frozen. This establishes a clear dependency: `q_usage_counter` has to be unlocked before `limits_lock` is taken.
Now, the critical question: is this a real deadlock situation? Could `nvme_update_ns_info` freeze the `q_usage_counter` on, say, `ns->head->disk->queue`, and then, while the counter is still frozen, call `queue_limits_start_update` on the *same* `ns->head->disk->queue`? That's what I need to verify. Let's dig deeper into `nvme_mpath_revalidate_zones` to confirm this.
|
| 23/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/nvme/host/multipath.c Name:nvme_mpath_revalidate_zones]
Results: map[SourceCode: 292: int nvme_mpath_revalidate_zones(struct nvme_ns_head *head)
293: {
294: struct gendisk *disk = head->disk;
295: int ret;
296:
297: if (!disk || !blk_queue_is_zoned(disk->queue) ||
298: !test_bit(NVME_NSHEAD_DISK_LIVE, &head->flags))
299: return 0;
300:
301: ret = blk_revalidate_disk_zones(disk);
302: if (ret)
303: dev_warn_ratelimited(disk_to_dev(disk),
304: "failed to revalidate zoned namespace head: %d\n",
305: ret);
306: return ret;
307: }
SourceFile:drivers/nvme/host/multipath.c]
|
| 24/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 34390
output: 38
thoughts: 1421
Thoughts: **Circular Dependency Discovered in NVMe Namespace Update**
Okay, so I've been tracing the execution flow of `nvme_mpath_revalidate_zones` and, specifically, its interaction with the block layer's zone management. It's clear that `nvme_mpath_revalidate_zones` calls `blk_revalidate_disk_zones`, which is fairly standard. But then, it dawned on me. `head->disk->queue` here is the *same* queue that's being manipulated in `nvme_update_ns_info`. And that's where things get interesting.
Let's break down the sequence in `nvme_update_ns_info`:
1. We start with `queue_limits_start_update(ns->head->disk->queue);` This acquires `limits_lock`.
2. Then, we have `blk_mq_freeze_queue(ns->head->disk->queue);`, which effectively freezes the `q_usage_counter`.
3. Next, `queue_limits_commit_update(ns->head->disk->queue, &lim);` releases `limits_lock`.
4. And now, we see `nvme_mpath_revalidate_zones(ns->head);`, which eventually calls `blk_revalidate_disk_zones(ns->head->disk)`.
5. `blk_revalidate_disk_zones` calls `disk_update_zone_resources(disk, &args)`
6. `disk_update_zone_resources` calls `queue_limits_start_update(disk->queue)`. And this re-acquires `limits_lock`!
Now, the critical point is that `nvme_update_ns_info` acquires `limits_lock` *while* the `q_usage_counter` is frozen. Freezing `q_usage_counter` essentially prevents new IO from starting on the queue. My initial thought was: this is a deadlock waiting to happen if another thread is holding the `limits_lock` and trying to start I/O on the frozen queue (which depends on `q_usage_counter`).
But then I realized, this *particular* code sequence in `nvme_update_ns_info` releases and re-acquires the lock itself. So, within the same thread, this *looks* like a circular dependency from a lockdep perspective. The first `lock` and second `lock` establishes that `limits_lock` depends on `q_usage_counter`, and the second and fourth `lock` establishes that `q_usage_counter` depends on `limits_lock`. This *should* trigger lockdep.
To confirm my hunch, I checked that `blk_mq_freeze_queue` indeed acquires `q_usage_counter` as a lock. Yes, `blk_mq_freeze_queue` ultimately calls `percpu_ref_kill_and_confirm`, which essentially waits for the counter to reach zero and is tracked by lockdep as an acquire (for write) on `q_usage_counter`.
So, it's clear: we have a sequence that looks like this:
1. `queue_limits_start_update(ns->head->disk->queue);` (Acquires `limits_lock`)
2. `blk_mq_freeze_queue(ns->head->disk->queue);` (Acquires `q_usage_counter`)
3. `queue_limits_commit_update(ns->head->disk->queue, &lim);` (Releases `limits_lock`)
4. `queue_limits_start_update(ns->head->disk->queue)` (Re-acquires `limits_lock`)
This clearly creates a circular dependency *within* `nvme_update_ns_info` itself. Lockdep *should* have a field day here!
Now, while this might not cause a true deadlock in a single-threaded scenario (just a lockdep warning), what happens if *another* thread tries to interact with this queue concurrently? It looks like we have a true deadlock scenario. Another thread *can* do `queue_limits_start_update` followed by `blk_mq_freeze_queue`, potentially creating a concurrent `lock(limits_lock); lock(q_usage_counter);` sequence.
The critical issue is concurrency between threads executing `nvme_update_ns_info` on the *same* namespace head (and therefore, the same queue). If Thread 1 acquires `limits_lock`, freezes `q_usage_counter`, and releases `limits_lock`, and *then* Thread 2 comes along and acquires `limits_lock`, and *then* tries to freeze
|
| 25/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_mq_freeze_queue]
Results: map[SourceCode: 951: static inline unsigned int __must_check
952: blk_mq_freeze_queue(struct request_queue *q)
953: {
954: unsigned int memflags = memalloc_noio_save();
955:
956: blk_mq_freeze_queue_nomemsave(q);
957: return memflags;
958: }
SourceFile:include/linux/blk-mq.h]
|
| 26/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 37018
output: 42
thoughts: 17
Thoughts: Okay, here's my summary, presented as a stream of thought:
**Diving into `blk_mq_freeze_queue_nomemsave`**
Alright, time to dig into this `blk_mq_freeze_queue_nomemsave` function. I need to refresh my memory on what exactly it does within the context of the block layer's multi-queue implementation. I know "freeze" usually implies a pause or suspension of some kind, but "nomemsave" is the intriguing part. That strongly suggests it's a freeze operation that's *not* designed to preserve the state of things in a way that allows a clean unfreeze or restart later. I wonder why they'd implement something with that constraint. Is it for emergency situations? Or perhaps for very specific scenarios where a full state save is overkill? Or maybe it's to avoid some sort of locking complexity? I need to look at the surrounding code to determine the exact use-case and understand the trade-offs they're making. My experience tells me that such a function is probably used for things that are transient, like error handling or debugging, or maybe for very specific control flows. Let's see...
|
| 27/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_mq_freeze_queue_nomemsave]
Results: map[SourceCode: 204: void blk_mq_freeze_queue_nomemsave(struct request_queue *q)
205: {
206: blk_freeze_queue_start(q);
207: blk_mq_freeze_queue_wait(q);
208: }
SourceFile:block/blk-mq.c]
|
| 28/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 37438
output: 38
thoughts: 25
Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience:
**Analyzing Block Layer Queue Freezing**
Alright, time to dig into this queue freezing business. My immediate focus is on understanding the interaction between `blk_freeze_queue_start` and `blk_mq_freeze_queue_wait`. I need to ensure the logic here is sound, particularly concerning how they orchestrate the freezing process in the block layer, especially within the context of `blk-mq`. I want to identify any potential race conditions or synchronization issues. I'm looking at how these functions manage queue state, how they signal and wait, and how they interact with other parts of the block layer that might be accessing or modifying the queue during the freeze/thaw cycle. I'm anticipating that understanding the precise control flow here is critical for ensuring data integrity and preventing deadlocks during operations like device removal or suspend/resume. So, let's start with those two functions and map out exactly what's happening.
|
| 29/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_freeze_queue_start]
Results: map[SourceCode: 182: void blk_freeze_queue_start(struct request_queue *q)
183: {
184: if (__blk_freeze_queue_start(q, current))
185: blk_freeze_acquire_lock(q);
186: }
SourceFile:block/blk-mq.c]
|
| 30/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 37819
output: 39
thoughts: 14
Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience and written in the first person:
**Investigating `__blk_freeze_queue_start`**
Okay, so I'm diving into this `__blk_freeze_queue_start` function. My initial thought is to quickly verify what the context is; specifically, how is this function called in the block layer, and in which code paths? It's crucial to understand where this freeze mechanism is initiated. Is it triggered by a system-wide freeze/thaw event, or are we dealing with a more targeted freeze of specific block devices? That influences everything, especially the potential performance impact and concurrency concerns. Next, I want to confirm what *exactly* happens within the function itself. Is it just putting the queues into a 'frozen' state, or is there more involved such as draining requests, stopping I/O, or manipulating internal data structures? I need to understand the granularity of the freeze. Are all queues affected equally, or is there some prioritization, like handling control queues differently from data queues? Once I've mapped out the function's internal details, I'll be looking for any potential race conditions or locking issues that could arise when multiple threads are trying to access or modify the same resources in parallel. Finally, I'll review any related functions (e.g., `__blk_thaw_queue_start`) to see how the system is unfrozen, and if there are any subtle differences in the freeze and unfreeze semantics. I want to build a complete picture of this freeze/thaw interaction in the block layer.
|
| 31/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:__blk_freeze_queue_start]
Results: map[SourceCode: 163: bool __blk_freeze_queue_start(struct request_queue *q,
164: struct task_struct *owner)
165: {
166: bool freeze;
167:
168: mutex_lock(&q->mq_freeze_lock);
169: freeze = blk_freeze_set_owner(q, owner);
170: if (++q->mq_freeze_depth == 1) {
171: percpu_ref_kill(&q->q_usage_counter);
172: mutex_unlock(&q->mq_freeze_lock);
173: if (queue_is_mq(q))
174: blk_mq_run_hw_queues(q, false);
175: } else {
176: mutex_unlock(&q->mq_freeze_lock);
177: }
178:
179: return freeze;
180: }
SourceFile:block/blk-mq.c]
|
| 32/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 38509
output: 38
thoughts: 41
Thoughts: Okay, let me think this through...
**Analyzing the Block Device Freeze Logic**
Hmm, so `blk_freeze_acquire_lock` is triggered only when `__blk_freeze_queue_start` returns true, meaning it's indicating that the block device needs to be frozen, and the caller is responsible for the freeze. Makes sense. But I need to refresh my memory on what `blk_freeze_set_owner` actually does in this context. It's crucial to understand how that function interacts with the lock acquisition. Does it set some flag, a pointer, or modify a data structure that affects how `blk_freeze_acquire_lock` behaves downstream? The ownership aspect is key to preventing race conditions during the freeze/thaw process. I'll need to dig into the function definition of `blk_freeze_set_owner` to clarify its role in all of this, especially if this is related to a custom implementation. The interaction between these functions is critical for the kernel to function correctly.
|
| 33/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_freeze_set_owner]
Results: map[SourceCode: 116: static bool blk_freeze_set_owner(struct request_queue *q,
117: struct task_struct *owner)
118: {
119: if (!owner)
120: return false;
121:
122: if (!q->mq_freeze_depth) {
123: q->mq_freeze_owner = owner;
124: q->mq_freeze_owner_depth = 1;
125: q->mq_freeze_disk_dead = !q->disk ||
126: test_bit(GD_DEAD, &q->disk->state) ||
127: !blk_queue_registered(q);
128: q->mq_freeze_queue_dying = blk_queue_dying(q);
129: return true;
130: }
131:
132: if (owner == q->mq_freeze_owner)
133: q->mq_freeze_owner_depth += 1;
134: return false;
135: }
SourceFile:block/blk-mq.c]
|
| 34/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 39131
output: 38
thoughts: 52
Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience, presented in the first person:
**First Encounter with `blk_freeze_acquire_lock`**
Right, so I'm digging into this code and immediately keying in on `blk_freeze_acquire_lock`. The crucial point here is that this function is *only* ever invoked when `q->mq_freeze_depth` is zero. That's a pretty significant constraint β it means this is the initial freeze operation, the very first time we're hitting a freeze on this particular queue. Given that, I need to understand what that lock is protecting and what preconditions exist *before* we hit that call. I need to make certain to trace back and determine how that `q->mq_freeze_depth` variable is set, updated, and reset.
|
| 35/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_freeze_acquire_lock]
Results: map[SourceCode: 761: static inline void blk_freeze_acquire_lock(struct request_queue *q)
762: {
763: if (!q->mq_freeze_disk_dead)
764: rwsem_acquire(&q->io_lockdep_map, 0, 1, _RET_IP_);
765: if (!q->mq_freeze_queue_dying)
766: rwsem_acquire(&q->q_lockdep_map, 0, 1, _RET_IP_);
767: }
SourceFile:block/blk.h]
|
| 36/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 39572
output: 40
thoughts: 147
Thoughts: Here's my take on those thoughts:
**Analyzing the Block Layer Freeze Logic**
Okay, so `blk_freeze_acquire_lock` is grabbing `q_usage_counter` through that `io_lockdep_map` mechanism. This means that if the first thread, Thread 1, freezes a block queue, it successfully acquires `q_usage_counter`. Makes sense.
But if a second thread, Thread 2, attempts to freeze the *same* queue, `blk_freeze_set_owner` returns `false`. This is key. It implies Thread 2 *doesn't* get to acquire `q_usage_counter`. That's the expected behavior, to prevent multiple threads from owning the freeze state at the same time.
But...wait a second. If Thread 2 freezes the queue, even though it doesn't get the lock, it *does* increment `mq_freeze_depth`. And crucially, it *doesn't* acquire the lockdep lock! That's odd. So lockdep, when it analyzes this, will only "see" Thread 1 holding `q_usage_counter` because Thread 2 didn't actually acquire the lock.
This is also a potential problem in the wait path as Thread 2 calls `blk_mq_freeze_queue_wait`.
|
| 37/2 |
2026/09/20 00:54 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-mq.c Name:blk_mq_freeze_queue_wait]
Results: map[SourceCode: 189: void blk_mq_freeze_queue_wait(struct request_queue *q)
190: {
191: wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->q_usage_counter));
192: }
SourceFile:block/blk-mq.c]
|
| 38/2 |
2026/09/20 00:54 |
llm |
expert |
0m
Model:
Tokens:
input: 40150
output: 40
thoughts: 1456
Thoughts: **Analyzing a Potential Lockdep Circular Dependency**
Okay, let's break this down. My initial thought process revolves around a potential lockdep issue involving `q_usage_counter` and `limits_lock`. Thread 2, it seems, *won't* block waiting for Thread 1 to unfreeze the queue because Thread 1 already killed `q_usage_counter`. That means Thread 2 can proceed and attempt to acquire `limits_lock`. But... Thread 1 *might* be holding `limits_lock`.
Ah, but no, Thread 1 releases `limits_lock` *before* calling `nvme_mpath_revalidate_zones`. However, inside `nvme_mpath_revalidate_zones`, it *re*acquires `limits_lock`. If Thread 2 were in `nvme_update_ns_info`, it acquires `limits_lock` and then freezes the queue. So, Thread 1 and Thread 2 are serialized by `limits_lock`. Therefore, Thread 2 can't freeze the queue while Thread 1 is holding `limits_lock`.
But hold on, Thread 1 holds `q_usage_counter` (frozen) and then acquires `limits_lock`. So, the sequence is:
```c
lock(limits_lock);
lock(q_usage_counter); // freeze
unlock(limits_lock);
lock(limits_lock); // in nvme_mpath_revalidate_zones
unlock(limits_lock);
unlock(q_usage_counter); // unfreeze
```
Exactly what Thread 1 does! Lockdep records `limits_lock` -> `q_usage_counter` due to `lock(limits_lock); lock(q_usage_counter);`. And, it records `q_usage_counter` -> `limits_lock` due to `lock(q_usage_counter); lock(limits_lock);`. That's a circular dependency! But... it's the *same* thread! Lockdep isn't really that clever. Is it a real deadlock?
Let's simulate with Thread 2. If Thread 2 tries `lock(limits_lock); lock(q_usage_counter);` concurrently, what happens? Thread 1 has `limits_lock`, freezes `q_usage_counter`. Thread 2 attempts and increments `mq_freeze_depth`, *doesn't* acquire the lockdep lock (reentrant), and immediately returns since Thread 1 already set it to zero! Thread 2 is then able to acquire and release `limits_lock`, and unfreezes the queue. There's no deadlock between Thread 1 and Thread 2 because `blk_mq_freeze_queue` is reentrant!
Okay, but what about Thread 3, trying to do IO? Thread 3: `blk_queue_enter` waits for `q_usage_counter` to be non-zero. That's normal.
Now, let's move to `fs_reclaim`. The report indicates a cycle: `fs_reclaim` -> `q_usage_counter` -> `limits_lock` -> `fs_reclaim`. We've established: `fs_reclaim` -> `q_usage_counter` (via `blk_alloc_queue`). `q_usage_counter` -> `limits_lock` (via `nvme_update_ns_info`). And finally `limits_lock` -> `fs_reclaim` (via `sd_revalidate_disk` calling `kmalloc` while holding the lock).
Is this a real deadlock? Time for some tracing with three threads.
* **Thread A (Memory Reclaim):** Holds `fs_reclaim`. Needs to write a page. Calls `blk_queue_enter` (NVMe). Waits for `q_usage_counter` to be non-zero.
* **Thread B (NVMe Update):** Holds `q_usage_counter` (queue frozen). Tries to acquire `limits_lock` (NVMe).
* **Thread C (SD Revalidate):** Holds `limits_lock` (SD). Calls `kmalloc(GFP_KERNEL)`. Waits for `fs_reclaim`.
Wait... Thread B needs `limits_lock` (NVMe), but Thread C holds `limits_lock` (SD)! These are *different* locks, belonging to different devices! Lockdep is warning because they belong to the *same lock class*.
Is it possible that Threads B and C are operating on the same device? No, because one is NVMe and the other is SCSI. But the report shows `nvme_update_ns_info` and `sd_revalidate_disk` potentially operating on the same device
|
| 39/2 |
2026/09/20 00:55 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-settings.c Name:queue_limits_commit_update_frozen]
Results: map[SourceCode: 573: /**
574: * queue_limits_commit_update_frozen - commit an atomic update of queue limits
575: * @q: queue to update
576: * @lim: limits to apply
577: *
578: * Apply the limits in @lim that were obtained from queue_limits_start_update()
579: * and updated with the new values by the caller to @q. Freezes the queue
580: * before the update and unfreezes it after.
581: *
582: * Returns 0 if successful, else a negative error code.
583: */
584: int queue_limits_commit_update_frozen(struct request_queue *q,
585: struct queue_limits *lim)
586: {
587: unsigned int memflags;
588: int ret;
589:
590: memflags = blk_mq_freeze_queue(q);
591: ret = queue_limits_commit_update(q, lim);
592: blk_mq_unfreeze_queue(q, memflags);
593:
594: return ret;
595: }
SourceFile:block/blk-settings.c]
|
| 40/2 |
2026/09/20 00:55 |
llm |
expert |
0m
Model:
Tokens:
input: 43042
output: 44
thoughts: 2397
Thoughts: **Analysis of Potential Deadlock in Block Layer with Lockdep False Positive**
Okay, so here's the breakdown of what I'm seeing: The code utilizes `queue_limits_commit_update_frozen`, and it seems to involve a sequence of operations with a queue. This is interesting because the function `queue_limits_commit_update` releases `limits_lock`, and this is significant.
Looking at `sd_revalidate_disk`, it appears to establish a lock order. I see it:
1. Acquiring `limits_lock` via `queue_limits_start_update`.
2. Allocating memory with `kmalloc(GFP_KERNEL)` and thus acquiring `fs_reclaim` using `sd_read_block_zero`.
3. Freezing the queue and releasing `limits_lock` with `queue_limits_commit_update_frozen`.
Therefore, `sd_revalidate_disk` creates the ordering: `limits_lock` -> `fs_reclaim` and `limits_lock` -> `q_usage_counter`.
Now, here's where it gets interesting: I realized that `sd_revalidate_disk` doesn't establish the order `q_usage_counter` -> `limits_lock`. However, `nvme_update_ns_info` does establish `q_usage_counter` -> `limits_lock`.
So, the potential issue arises in a system with *both* NVMe and SD devices:
* **Thread A (Memory Reclaim):** Holds `fs_reclaim` and submits a bio to the NVMe device, potentially waiting for `q_usage_counter` (NVMe).
* **Thread B (NVMe update):** Holds `q_usage_counter` (NVMe) (frozen) and waits for `limits_lock` (NVMe).
However, I've concluded there is NO deadlock in this scenario. This is because I realize that `limits_lock` (NVMe) isn't held by Thread C. Thread C holds `limits_lock` (SD). Lockdep is giving a false positive due to its inability to distinguish between different lock instances associated with different devices, effectively causing a false positive in the lock classes.
Further investigation reveals that Thread A can indeed submit a bio to the NVMe device while Thread B is updating it. However, the critical point is who holds `limits_lock` (NVMe). If Thread B initiated the queue freeze, then Thread B is the one who will acquire `limits_lock` (NVMe).
Okay, now let's dig deeper: Could Thread C update NVMe? Can Thread C hold `limits_lock` (NVMe) and wait for `fs_reclaim`?
I am now looking at the allocations and the lock acquisitions within the NVMe context. Specifically, I'm checking if NVMe does `kmalloc(GFP_KERNEL)` while holding `limits_lock`. I see that in `nvme_update_ns_info`, `queue_limits_start_update` acquires `limits_lock` and then `blk_mq_freeze_queue` is called which sets allocations within that section as `GFP_NOIO`. This means that all allocations after `blk_mq_freeze_queue` call are `GFP_NOIO`, indicating that no `GFP_KERNEL` allocations are occurring while holding `limits_lock` in this particular instance. The crucial point is the use of `memalloc_noio_save()` and `memalloc_noio_restore()` around the queue freeze, which ensures that all allocations between are made with `GFP_NOIO`.
Next, I looked at the SD side of things, specifically `sd_revalidate_disk`. Here, `queue_limits_start_update` is called, *before* the queue is frozen. This means that, unlike the NVMe case, `memalloc_noio_save()` has not been called. This is critical, because `sd_read_block_zero` does `kmalloc(buf_len, GFP_KERNEL)` *while holding* `limits_lock`! So, SD *does* do `GFP_KERNEL` allocations while holding `limits_lock`. However, SD does not establish the `q_usage_counter` -> `limits_lock` order. SD does:
1. `lock(limits_lock)`
2. `kmalloc(GFP_KERNEL)` -> `lock(fs_reclaim)`
3. `lock(q_usage_counter)`
4. `unlock(limits_lock)`
5. `unlock(q_usage_counter)`
This means the lock order is: `limits_lock` -> `fs_reclaim` and `limits_lock`
|
| 41/2 |
2026/09/20 00:55 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:drivers/scsi/sd_zbc.c Name:sd_zbc_revalidate_zones]
Results: map[SourceCode: 536: /*
537: * Call blk_revalidate_disk_zones() if any of the zoned disk properties have
538: * changed that make it necessary to call that function. Called by
539: * sd_revalidate_disk() after the gendisk capacity has been set.
540: */
541: int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
542: {
543: struct gendisk *disk = sdkp->disk;
544: struct request_queue *q = disk->queue;
545: u32 zone_blocks = sdkp->early_zone_info.zone_blocks;
546: unsigned int nr_zones = sdkp->early_zone_info.nr_zones;
547: unsigned int flags;
548: int ret;
549:
550: /*
551: * There is nothing to do for regular disks, including host-aware disks
552: * that have partitions.
553: */
554: if (!blk_queue_is_zoned(q))
555: return 0;
556:
557: if (sdkp->zone_info.zone_blocks == zone_blocks &&
558: sdkp->zone_info.nr_zones == nr_zones &&
559: disk->nr_zones == nr_zones)
560: return 0;
561:
562: sdkp->zone_info.zone_blocks = zone_blocks;
563: sdkp->zone_info.nr_zones = nr_zones;
564:
565: flags = memalloc_noio_save();
566: ret = blk_revalidate_disk_zones(disk);
567: memalloc_noio_restore(flags);
568: if (ret) {
569: sdkp->zone_info = (struct zoned_disk_info){ };
570: sdkp->capacity = 0;
571: return ret;
572: }
573:
574: sd_zbc_print_zones(sdkp);
575:
576: return 0;
577: }
SourceFile:drivers/scsi/sd_zbc.c]
|
| 42/2 |
2026/09/20 00:55 |
llm |
expert |
0m
Model:
Tokens:
input: 47177
output: 29
thoughts: 967
Thoughts: **Analyzing a Lockdep False Positive in Block Layer Resource Management**
Okay, let's break this down. My initial thought was: the `sd_zbc_revalidate_zones` function calls `blk_revalidate_disk_zones`, which then calls `disk_update_zone_resources` and ultimately `queue_limits_start_update`. My concern stemmed from wondering if the `q_usage_counter` was frozen during this process. In the `sd_revalidate_disk` function, I saw `queue_limits_commit_update_frozen` β this *unfreezes* the queue. Therefore, when `sd_zbc_revalidate_zones` executes, the queue isn't actually frozen. SD *doesn't* establish the `q_usage_counter` -> `limits_lock` dependency directly.
So, in the current scenario, SD only has the dependency of `limits_lock` -> `fs_reclaim`. NVMe, on the other hand, has `q_usage_counter` -> `limits_lock`. And `blk_alloc_queue` links `fs_reclaim` -> `q_usage_counter`.
This is where the cycle *appears* to form:
* Path 1: `blk_alloc_queue` (any queue) -> `fs_reclaim` -> `q_usage_counter`
* Path 2: `nvme_update_ns_info` (NVMe queue) -> `q_usage_counter` -> `limits_lock`
* Path 3: `sd_revalidate_disk` (SD queue) -> `limits_lock` -> `fs_reclaim`
However, and this is crucial, `q_usage_counter` and `limits_lock` are *per-queue*. Since no single queue has both Paths 2 and 3 active on it, this should be a false positive. But then the Lockdep tool, being what it is, lumps all `q_usage_counter` locks into a single lock class and all `limits_lock` locks into another. From its perspective, it *does* see a cycle in these lock classes.
My next thought was to consider a more complex scenario. Could a thread holding the `limits_lock` of SD be waiting for `fs_reclaim`, while memory reclaim waits on the `q_usage_counter` of NVMe, and an NVMe update holds that `q_usage_counter` and waits for the `limits_lock` of NVMe? Let's trace it:
* Thread A (SD update): Holds `limits_lock` (SD). Calls `kmalloc(GFP_KERNEL)`. Waits for `fs_reclaim`.
* Thread B (Memory Reclaim): Holds `fs_reclaim`. Submits a bio to NVMe. Waits for `q_usage_counter` (NVMe).
* Thread C (NVMe update): Holds `q_usage_counter` (NVMe) (frozen). Waits for `limits_lock` (NVMe).
Is there deadlock? Thread C is waiting for `limits_lock` (NVMe), but who *holds* `limits_lock` (NVMe)? Nobody! Thread A holds `limits_lock` (SD)! So Thread C will acquire `limits_lock` (NVMe), finish its work and unfreeze `q_usage_counter` (NVMe). Then Thread B will acquire `q_usage_counter` (NVMe), complete its bio, and release `fs_reclaim`. Lastly, Thread A will acquire `fs_reclaim`, finish its allocation, and release `limits_lock` (SD). Thus, *no* deadlock.
This is a classic Lockdep false positive due to lock classes, and one fix is that NVMe and SD should be in different lock classes. Or the kernel developers could change `sd_revalidate_disk` to use `GFP_NOIO` for allocations while holding `limits_lock`. Since `sd_read_block_zero` does `kmalloc(buf_len, GFP_KERNEL)`, using `GFP_NOIO` will break the `limits_lock` -> `fs_reclaim` dependency, and the lockdep warning will disappear. Now, let's see if there is a patch for this.
|
| 43/2 |
2026/09/20 00:55 |
tool |
git-log |
0m
Args: map[CodeRegexp:sd_read_block_zero Count:10]
Results: map[Output:9d80aa4617b3 Add linux-next specific files for 20260903
]
|
| 44/2 |
2026/09/20 00:56 |
llm |
expert |
0m
Model:
Tokens:
input: 49142
output: 56
thoughts: 33
Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue:
**Checking for a Crucial Kernel Patch**
Right, before I dive too deep into debugging this issue, it's a good practice to quickly verify the obvious. My first thought is to see if there's a recent patch floating around, specifically targeting `sd_read_block_zero` and a change from `GFP_KERNEL` to `GFP_NOIO`. That combination immediately screams "potential resource contention issue during initialization or error handling," and somebody may have already nailed it. Checking for this patch is a low-hanging fruit: it might save a lot of head-scratching. Itβs the kind of thing that could've been flagged by a skilled colleague, or even spotted during a code review by an observant developer familiar with the nuances of memory allocation in the kernel. A quick search of the patch database is definitely warranted. It's a fundamental part of the debugging process - look for known solutions before going deeper.
|
| 45/2 |
2026/09/20 00:56 |
tool |
git-log |
0m
Args: map[CodeRegexp:kmalloc.*GFP_NOIO Count:10 SourcePath:drivers/scsi/sd.c SymbolName:sd_read_block_zero]
Results:
|
| 46/2 |
2026/09/20 00:56 |
llm |
expert |
0m
Model:
Tokens:
input: 49458
output: 29
thoughts: 33
Thoughts: Okay, here's my interpretation of that thought process, as if it were my own:
**Investigating Potential Lockdep Issues in SCSI Driver Code**
Alright, time to dig in. I'm thinking I need to see if there's any recent activity in `drivers/scsi/sd.c` that might be related to lockdep or `GFP_NOIO`. Those are two specific areas that tend to trip up locking analysis and memory allocation in the kernel, respectively. If a recent commit touched either of those, it's a good place to start looking for potential lockdep warnings or memory allocation issues that could be introduced or exacerbated. I'll need to figure out the best way to search the commit history β maybe `git log` with some clever filtering, or a kernel build tool if one exists for easy searching of commits. It could be that another person just committed code that is now causing a fault, and it's my job to find it. I'll focus on anything in that file, as it deals with SCSI disk I/O, and locking and memory allocation are critical for stable and efficient block device operations. Time to get to work!
|
| 47/2 |
2026/09/20 00:56 |
tool |
git-log |
0m
Args: map[Count:10 PathPrefix:drivers/scsi/sd.c]
Results: map[Output:9d80aa4617b3 Add linux-next specific files for 20260903
]
|
| 48/2 |
2026/09/20 00:56 |
llm |
expert |
0m
Model:
Tokens:
input: 49804
output: 39
thoughts: 838
Thoughts: **Analyzing a Lockdep Warning in Syzkaller**
Okay, so the kernel reports a `lockdep` warning, specifically `syzkaller #0 Tainted: G L`. My initial reaction is to assess its exploitability. Lockdep warnings often indicate potential concurrency issues. Is this a real deadlock? Not necessarily. The `panic_on_warn` flag would trigger a panic, a Denial of Service. However, the system's output explicitly states that lockdep, being a debug tool, is disabled in production builds. Therefore, the warning itself would not even be printed in a production environment, and there would be no panic. Itβs likely a false positive, causing no real deadlock. So, no impact in production.
Now, I need to verify that this isnβt a real deadlock. Letβs re-examine if the `limits_lock` used by SD and NVMe could be the *same* lock. I've got to be meticulous here. Quick check: the `limits_lock` is initialized within `blk_alloc_queue` as a mutex, meaning itβs a per-queue mutex. SD and NVMe have different instances. So, thatβs good. But, a single queue could have both `q_usage_counter` -> `limits_lock` AND `limits_lock` -> `fs_reclaim`.
I reviewed NVMe. I know that NVMe uses `GFP_NOIO` while holding `limits_lock` because `blk_mq_freeze_queue` calls `memalloc_noio_save()`. Now, does NVMe perform any `GFP_KERNEL` allocations *before* calling `blk_mq_freeze_queue`? In `nvme_update_ns_info` and `nvme_update_ns_info_block` I see the function `queue_limits_start_update()` immediately followed by the `blk_mq_freeze_queue()` call. No allocation happens between them. Itβs clear that NVMe does *not* exhibit `limits_lock` -> `fs_reclaim`.
Now, the SD case. SD *does* have `limits_lock` -> `fs_reclaim` in `sd_read_block_zero`. The question now is: does SD acquire `limits_lock` while `q_usage_counter` is frozen? Looking at `sd_revalidate_disk`, I see a call to `queue_limits_commit_update_frozen`, which *unfreezes* the queue, before calling `sd_zbc_revalidate_zones`. This, in turn, calls `blk_revalidate_disk_zones`, which calls `disk_update_zone_resources`, which acquires `limits_lock`. However, the queue is NOT frozen at this point! Wait, does `blk_revalidate_disk_zones` freeze the queue? I need to double-check that part.
|
| 49/2 |
2026/09/20 00:56 |
tool |
codesearch-definition-source |
0m
Args: map[ContextFile:block/blk-zoned.c Name:blk_revalidate_disk_zones]
Results: map[SourceCode:2301: /**
2302: * blk_revalidate_disk_zones - (re)allocate and initialize zone write plugs
2303: * @disk: Target disk
2304: *
2305: * Helper function for low-level device drivers to check, (re) allocate and
2306: * initialize resources used for managing zoned disks. This function should
2307: * normally be called by blk-mq based drivers when a zoned gendisk is probed
2308: * and when the zone configuration of the gendisk changes (e.g. after a format).
2309: * Before calling this function, the device driver must already have set the
2310: * device zone size (chunk_sector limit) and the max zone append limit.
2311: * BIO based drivers can also use this function as long as the device queue
2312: * can be safely frozen.
2313: */
2314: int blk_revalidate_disk_zones(struct gendisk *disk)
2315: {
2316: struct request_queue *q = disk->queue;
2317: sector_t zone_sectors = q->limits.chunk_sectors;
2318: sector_t capacity = get_capacity(disk);
2319: struct blk_revalidate_zone_args args = { };
2320: unsigned int memflags, noio_flag;
2321: struct blk_report_zones_args rep_args = {
2322: .cb = blk_revalidate_zone_cb,
2323: .data = &args,
2324: };
2325: int ret = -ENOMEM;
2326:
2327: if (WARN_ON_ONCE(!blk_queue_is_zoned(q)))
2328: return -EIO;
2329:
2330: if (!capacity)
2331: return -ENODEV;
2332:
2333: /*
2334: * Checks that the device driver indicated a valid zone size and that
2335: * the max zone append limit is set.
2336: */
2337: if (!zone_sectors || !is_power_of_2(zone_sectors)) {
2338: pr_warn("%s: Invalid non power of two zone size (%llu)\n",
2339: disk->disk_name, zone_sectors);
2340: return -ENODEV;
2341: }
2342:
2343: /*
2344: * Ensure that all memory allocations in this context are done as if
2345: * GFP_NOIO was specified.
2346: */
2347: noio_flag = memalloc_noio_save();
2348: ret = disk_revalidate_zone_resources(disk, &args);
2349: if (ret) {
2350: memalloc_noio_restore(noio_flag);
2351: return ret;
2352: }
2353:
2354: ret = disk->fops->report_zones(disk, 0, UINT_MAX, &rep_args);
2355: if (!ret) {
2356: pr_warn("%s: No zones reported\n", disk->disk_name);
2357: ret = -ENODEV;
2358: }
2359: memalloc_noio_restore(noio_flag);
2360:
2361: if (ret <= 0)
2362: goto free_resources;
2363:
2364: /*
2365: * If zones where reported, make sure that the entire disk capacity
2366: * has been checked.
2367: */
2368: if (args.sector != capacity) {
2369: pr_warn("%s: Missing zones from sector %llu\n",
2370: disk->disk_name, args.sector);
2371: ret = -ENODEV;
2372: goto free_resources;
2373: }
2374:
2375: ret = disk_update_zone_resources(disk, &args);
2376: if (ret)
2377: goto free_resources;
2378:
2379: return 0;
2380:
2381: free_resources:
2382: pr_warn("%s: failed to revalidate zones\n", disk->disk_name);
2383:
2384: kfree(args.zones_cond);
2385: memflags = blk_mq_freeze_queue(q);
2386: disk_free_zone_resources(disk);
2387: blk_mq_unfreeze_queue(q, memflags);
2388:
2389: return ret;
2390: }
SourceFile:block/blk-zoned.c]
|
| 50/2 |
2026/09/20 00:56 |
llm |
expert |
0m
Model:
Tokens:
input: 52669
output: 66
thoughts: 3950
Thoughts: **Analysis of a Lockdep False Positive: A Deep Dive**
Okay, so here's the deal. I've been staring at this lockdep report, and after some serious digging, I've got a handle on it. The initial warning seems alarming, a potential circular locking dependency involving `fs_reclaim`, `q_usage_counter`, and `limits_lock`. My initial reaction was to jump to a real deadlock situation, but now, I see it's a classic false positive.
The core issue lies in how different device drivers β specifically NVMe and SCSI SD β interact with the block layer. The lockdep tool is flagging a potential cycle, suggesting a dangerous sequence where one driver could be waiting on a resource that another driver is holding, leading to a standstill.
My analysis reveals three key paths involved: First, the system annotates the dependency of `fs_reclaim` on `q_usage_counter`. Second, the NVMe driver, in its `nvme_update_ns_info` routine, does indeed establish a dependency on `limits_lock` while freezing the queue, which includes `q_usage_counter`. Third, the SD driver, while revalidating zones, first commits updates (which includes `kmalloc(GFP_KERNEL)` which ends up using `fs_reclaim`) and then freezes the queue in `queue_limits_commit_update_frozen`, so it acquires the `limits_lock` and touches `fs_reclaim` *before* freezing the queue which contains `q_usage_counter`. This creates a path where `limits_lock` depends on `fs_reclaim`.
Here's the problem: The critical parts of this cycle happen *on different queues*. The NVMe path applies to the NVMe queue, and the SD path applies to the SD queue. The lockdep tool groups all locks in the same class, and thus sees the global relationship. This makes the lockdep report a false positive. In reality, the dependency doesn't exist *within* a single queue, and therefore, it's not a real deadlock.
What's really happening is that lockdep, while incredibly useful, can't fully account for the per-queue nature of these locks and incorrectly infers a deadlock cycle that does not exist. The memory reclaim process *can* wait for `q_usage_counter` on the SD queue. The SD revalidate routine will also take the `limits_lock` on the SD queue. The NVMe routine can take the `q_usage_counter` and `limits_lock` on the NVMe queue. There is NO circumstance where the NVMe routine can touch the locks on the SD queue, and vice-versa. And since lockdep assumes the lock is on the same queue, it sees a false circular dependency.
So, in terms of real-world impact, this is good news. Production systems won't be affected because lockdep isn't enabled. Even if it were, the warning is a red herring. It's not exploitable by any attacker. It is not a denial of service, and is totally harmless. The warning can be triggered by hotplugging a USB drive (Peripheral Trigger) or adding virtual disks to a VM (VM Guest Trigger). It requires root access to hotplug the USB device.
I've carefully considered any way this could become a real issue, particularly if another driver somehow intertwined these paths. But I can't find a scenario where a single queue gets locked into this. I've double-checked the logic and I am completely confident in this conclusion. Itβs a false positive, plain and simple. We can close this out.
|
| 51/2 |
2026/09/20 00:56 |
tool |
set-results |
0m
Args: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:true RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:true VMHostTrigger:false]
Results: map[DenialOfService:false Exploitable:false FilesystemTrigger:false NetworkTrigger:false PeripheralTrigger:true RemoteTrigger:false Unprivileged:false UserNamespace:false VMGuestTrigger:true VMHostTrigger:false]
|
| 52/2 |
2026/09/20 00:56 |
llm |
expert |
0m
Model:
Tokens:
input: 57521
output: 662
thoughts: 442
Thoughts: **My Analysis of the Lockdep Warning**
Okay, the results are in. Time to craft the definitive response. Here's how I see it: We've got a lockdep warning, and it's pointing to a potential circular locking dependency. Let's break down the issue.
First, the nature of the beast: it's a lockdep warning, specifically flagging a potential circular dependency in our locking scheme. This is something we need to fully understand.
Now, the dependency chain. This is the crux of the problem. We've got three locks involved, and the relationships are as follows:
1. `fs_reclaim` depends on `q_usage_counter`. This is established by `blk_alloc_queue`, and it's explicitly annotated, so that's clear.
2. `q_usage_counter` depends on `limits_lock`. The NVMe driver, specifically `nvme_update_ns_info`, is the culprit here. It freezes the queue, holding `q_usage_counter`, and then calls `nvme_mpath_revalidate_zones`, which ends up acquiring `limits_lock`.
3. `limits_lock` depends on `fs_reclaim`. This one's rooted in the SCSI SD driver. `sd_revalidate_disk` grabs `limits_lock`, then calls `sd_read_block_zero`, which does a `kmalloc(GFP_KERNEL)` allocation, and that ultimately pulls in `fs_reclaim`.
Here's the key: **it's a false positive.** This looks bad on paper, but in reality, it's safe. The cycle is formed by combining lock dependencies from two completely separate block device drivers β NVMe and SCSI/SD β operating on their own, independent request queues. Lockdep, in its analysis, groups all `q_usage_counter` locks into a single class and all `limits_lock` locks into another. Because these locks belong to different device instances (different queues) and no single thread will ever simultaneously hold the locks in a way that creates a real deadlock, this circular dependency is harmless. No single thread will ever be in a position to form a deadlock with these locks.
The implications are minimal. Since lockdep is a debugging tool and disabled in production builds, this warning isn't going to be printed in a released kernel. Even if `panic_on_warn` were enabled, this wouldn't trigger a kernel panic in a deployed system. There's no actual deadlock, so no denial-of-service vulnerability or any exploitable condition. We're in the clear there.
Finally, the trigger: Device discovery is the likely culprit. Think USB mass storage device plugging, or hotplugging virtual NVMe/SCSI disks in a VM. This is only going to come up during device discovery, so the Peripheral and VM Guest Triggers are key. Importantly, this isn't something that can be triggered by an unprivileged user. Root privileges or physical access are required.
So, while the lockdep warning is valid in a technical sense, we can confidently classify this as a false positive and proceed without any concern. We might want to add some annotations to the code to help the tool better understand the locking, but it's not critical.
|
| 53/1 |
2026/09/20 00:57 |
action |
format-explanation |
0m
Results: map[Explanation:**Analysis of the Bug Report**
The bug report indicates a lockdep warning about a "possible circular locking
dependency" involving three lock classes: `fs_reclaim`, `q_usage_counter`, and
`limits_lock`.
By analyzing the stack traces and the source code, we can break down how this
dependency chain is formed:
1. **`fs_reclaim` -> `q_usage_counter`**: This dependency is explicitly
established via a lockdep annotation in `blk_alloc_queue()` to teach lockdep
that memory reclaim might wait for queue IO to complete (queue freeze).
2. **`q_usage_counter` -> `limits_lock`**: This dependency is established by the
NVMe driver. In `nvme_update_ns_info()`, the driver freezes the queue (which
lockdep tracks as acquiring `q_usage_counter`), and while the queue is still
frozen, it calls `nvme_mpath_revalidate_zones()`. This function eventually calls
`queue_limits_start_update()`, which acquires the `limits_lock`.
3. **`limits_lock` -> `fs_reclaim`**: This dependency is established by the SCSI
SD driver. In `sd_revalidate_disk()`, the driver acquires the `limits_lock` (via
`queue_limits_start_update()`) and subsequently calls `sd_read_block_zero()`.
This function performs a `kmalloc(..., GFP_KERNEL)` allocation, which acquires
the `fs_reclaim` pseudo-lock.
**Why this is a False Positive:**
The circular dependency is formed by combining lock dependencies from two
completely different block device drivers (NVMe and SCSI/SD) operating on their
respective, independent request queues. Lockdep groups all `q_usage_counter`
locks into a single lock class and all `limits_lock` locks into another lock
class. Because the locks belong to different device instances (one NVMe queue
and one SD queue), no single thread will ever hold the locks in a way that
causes an actual deadlock. The SD driver never acquires `limits_lock` while its
queue is frozen, and the NVMe driver uses `GFP_NOIO` allocations while holding
its `limits_lock`. Thus, a real deadlock is impossible.
**Security Impact:**
- **Exploitable / Denial of Service:** False. Lockdep is a kernel debugging tool
that is strictly disabled in production builds. Therefore, this warning will not
be printed, nor will it trigger a kernel panic (even if `panic_on_warn` is set,
as the tool itself is inactive). Because it is a false positive, it does not
represent a real deadlock or memory corruption issue. It has no security impact
in production environments.
- **Trigger Mechanisms:** The warning is triggered during block device discovery
and revalidation. This can be achieved by plugging in a USB mass storage device
(Peripheral Trigger) or by hotplugging virtual NVMe/SCSI disks in a virtualized
environment (VM Guest Trigger). It cannot be triggered by unprivileged users or
from within user namespaces, as device hotplugging and discovery require
physical access or root privileges.]
|